diff options
| author | Tom Rini <trini@konsulko.com> | 2017-01-02 16:32:05 -0500 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2017-01-02 16:32:05 -0500 |
| commit | 516457013e5a88f65f9d6c11e9171cb03871cc92 (patch) | |
| tree | 583cfafeddbacd1d1a456f49f1e687c4eb8e062c /board | |
| parent | 99b02b4dce0b2fc759fb8ced5701c0d4fb7b2200 (diff) | |
| parent | 7c4f0ff81e6fc3b58b8af5f64c3da98624e40132 (diff) | |
| download | u-boot-516457013e5a88f65f9d6c11e9171cb03871cc92.tar.gz u-boot-516457013e5a88f65f9d6c11e9171cb03871cc92.tar.xz u-boot-516457013e5a88f65f9d6c11e9171cb03871cc92.zip | |
Merge branch 'master' of git://www.denx.de/git/u-boot-imx
Diffstat (limited to 'board')
| -rw-r--r-- | board/engicam/geam6ul/MAINTAINERS | 1 | ||||
| -rw-r--r-- | board/freescale/mx6qsabreauto/mx6qsabreauto.c | 28 | ||||
| -rw-r--r-- | board/udoo/neo/neo.c | 7 | ||||
| -rw-r--r-- | board/warp7/warp7.c | 14 |
4 files changed, 46 insertions, 4 deletions
diff --git a/board/engicam/geam6ul/MAINTAINERS b/board/engicam/geam6ul/MAINTAINERS index 66914509a1..079370ccb9 100644 --- a/board/engicam/geam6ul/MAINTAINERS +++ b/board/engicam/geam6ul/MAINTAINERS @@ -4,3 +4,4 @@ S: Maintained F: board/engicam/geam6ul F: include/configs/imx6ul_geam.h F: configs/imx6ul_geam_mmc_defconfig +F: configs/imx6ul_geam_nand_defconfig diff --git a/board/freescale/mx6qsabreauto/mx6qsabreauto.c b/board/freescale/mx6qsabreauto/mx6qsabreauto.c index 5fca4d11e0..51bbbc4cdf 100644 --- a/board/freescale/mx6qsabreauto/mx6qsabreauto.c +++ b/board/freescale/mx6qsabreauto/mx6qsabreauto.c @@ -231,6 +231,33 @@ static void eimnor_cs_setup(void) set_chipselect_size(CS0_128); } +static void eim_clk_setup(void) +{ + struct mxc_ccm_reg *imx_ccm = (struct mxc_ccm_reg *)CCM_BASE_ADDR; + int cscmr1, ccgr6; + + + /* Turn off EIM clock */ + ccgr6 = readl(&imx_ccm->CCGR6); + ccgr6 &= ~(0x3 << 10); + writel(ccgr6, &imx_ccm->CCGR6); + + /* + * Configure clk_eim_slow_sel = 00 --> derive clock from AXI clk root + * and aclk_eim_slow_podf = 01 --> divide by 2 + * so that we can have EIM at the maximum clock of 132MHz + */ + cscmr1 = readl(&imx_ccm->cscmr1); + cscmr1 &= ~(MXC_CCM_CSCMR1_ACLK_EMI_SLOW_MASK | + MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_MASK); + cscmr1 |= (1 << MXC_CCM_CSCMR1_ACLK_EMI_SLOW_PODF_OFFSET); + writel(cscmr1, &imx_ccm->cscmr1); + + /* Turn on EIM clock */ + ccgr6 |= (0x3 << 10); + writel(ccgr6, &imx_ccm->CCGR6); +} + static void setup_iomux_eimnor(void) { imx_iomux_v3_setup_multiple_pads(eimnor_pads, ARRAY_SIZE(eimnor_pads)); @@ -519,6 +546,7 @@ int board_early_init_f(void) #ifdef CONFIG_NAND_MXS setup_gpmi_nand(); #endif + eim_clk_setup(); return 0; } diff --git a/board/udoo/neo/neo.c b/board/udoo/neo/neo.c index 688b522ce3..530c45f600 100644 --- a/board/udoo/neo/neo.c +++ b/board/udoo/neo/neo.c @@ -349,9 +349,9 @@ int board_init(void) /* Active high for ncp692 */ gpio_direction_output(IMX_GPIO_NR(4, 16) , 1); - #ifdef CONFIG_SYS_I2C_MXC +#ifdef CONFIG_SYS_I2C_MXC setup_i2c(0, CONFIG_SYS_I2C_SPEED, 0x7f, &i2c_pad_info1); - #endif +#endif return 0; } @@ -389,9 +389,8 @@ int board_early_init_f(void) return 0; } -static struct fsl_esdhc_cfg usdhc_cfg[2] = { +static struct fsl_esdhc_cfg usdhc_cfg[1] = { {USDHC2_BASE_ADDR, 0, 4}, - {USDHC3_BASE_ADDR, 0, 4}, }; #define USDHC2_PWR_GPIO IMX_GPIO_NR(6, 1) diff --git a/board/warp7/warp7.c b/board/warp7/warp7.c index da9afb4ccd..df8e9da6f9 100644 --- a/board/warp7/warp7.c +++ b/board/warp7/warp7.c @@ -19,6 +19,7 @@ #include <mmc.h> #include <asm/arch/crm_regs.h> #include <usb.h> +#include <netdev.h> #include <power/pmic.h> #include <power/pfuze3000_pmic.h> #include "../freescale/common/pfuze.h" @@ -138,6 +139,19 @@ int power_init_board(void) } #endif +int board_eth_init(bd_t *bis) +{ + int ret = 0; + +#ifdef CONFIG_USB_ETHER + ret = usb_eth_initialize(bis); + if (ret < 0) + printf("Error %d registering USB ether.\n", ret); +#endif + + return ret; +} + int board_init(void) { /* address of boot parameters */ |