TQM: move TQM boards to board/tqc

Move all TQM board directories to the vendor specific directory "tqc"
for modules from TQ-Components GmbH (http://www.tqc.de).

Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>

7 files changed, 1844 insertions, 0 deletions

diff --git a/board/tqc/tqm8xx/Makefile b/board/tqc/tqm8xx/Makefile
new file mode 100644
index 0000000000..b48934b429
--- /dev/null
+++ b/board/tqc/tqm8xx/Makefile
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2000-2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= $(obj)lib$(BOARD).a
+
+COBJS	= $(BOARD).o flash.o load_sernum_ethaddr.o
+
+SRCS	:= $(SOBJS:.o=.S) $(COBJS:.o=.c)
+OBJS	:= $(addprefix $(obj),$(COBJS))
+SOBJS	:= $(addprefix $(obj),$(SOBJS))
+
+$(LIB):	$(obj).depend $(OBJS)
+	$(AR) $(ARFLAGS) $@ $(OBJS)
+
+#########################################################################
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/board/tqc/tqm8xx/config.mk b/board/tqc/tqm8xx/config.mk
new file mode 100644
index 0000000000..9d6080b84a
--- /dev/null
+++ b/board/tqc/tqm8xx/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2000
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# TQM8xxL boards
+#
+
+TEXT_BASE = 0x40000000
diff --git a/board/tqc/tqm8xx/flash.c b/board/tqc/tqm8xx/flash.c
new file mode 100644
index 0000000000..4342ebc841
--- /dev/null
+++ b/board/tqc/tqm8xx/flash.c
@@ -0,0 +1,834 @@
+/*
+ * (C) Copyright 2000-2004
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <mpc8xx.h>
+#include <environment.h>
+
+#include <asm/processor.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#if !defined(CFG_FLASH_CFI_DRIVER) /* do not use if CFI driver is configured */
+
+#if defined(CONFIG_TQM8xxL) && !defined(CONFIG_TQM866M) \
+    && !defined(CONFIG_TQM885D)
+# ifndef CFG_OR_TIMING_FLASH_AT_50MHZ
+#  define CFG_OR_TIMING_FLASH_AT_50MHZ	(OR_ACS_DIV1  | OR_TRLX | OR_CSNT_SAM | \
+					 OR_SCY_2_CLK | OR_EHTR | OR_BI)
+# endif
+#endif /* CONFIG_TQM8xxL/M, !TQM866M, !TQM885D */
+
+#ifndef	CFG_ENV_ADDR
+#define CFG_ENV_ADDR	(CFG_FLASH_BASE + CFG_ENV_OFFSET)
+#endif
+
+flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size (vu_long *addr, flash_info_t *info);
+static int write_word (flash_info_t *info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init (void)
+{
+	volatile immap_t     *immap  = (immap_t *)CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	unsigned long size_b0, size_b1;
+	int i;
+
+#ifdef	CFG_OR_TIMING_FLASH_AT_50MHZ
+	int scy, trlx, flash_or_timing, clk_diff;
+
+	scy = (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_SCY_MSK) >> 4;
+	if (CFG_OR_TIMING_FLASH_AT_50MHZ & OR_TRLX) {
+		trlx = OR_TRLX;
+		scy *= 2;
+	} else
+		trlx = 0;
+
+		/* We assume that each 10MHz of bus clock require 1-clk SCY
+		 * adjustment.
+		 */
+	clk_diff = (gd->bus_clk / 1000000) - 50;
+
+		/* We need proper rounding here. This is what the "+5" and "-5"
+		 * are here for.
+		 */
+	if (clk_diff >= 0)
+		scy += (clk_diff + 5) / 10;
+	else
+		scy += (clk_diff - 5) / 10;
+
+		/* For bus frequencies above 50MHz, we want to use relaxed timing
+		 * (OR_TRLX).
+		 */
+	if (gd->bus_clk >= 50000000)
+		trlx = OR_TRLX;
+	else
+		trlx = 0;
+
+	if (trlx)
+		scy /= 2;
+
+	if (scy > 0xf)
+		scy = 0xf;
+	if (scy < 1)
+		scy = 1;
+
+	flash_or_timing = (scy << 4) | trlx |
+	                  (CFG_OR_TIMING_FLASH_AT_50MHZ & ~(OR_TRLX | OR_SCY_MSK));
+#endif
+	/* Init: no FLASHes known */
+	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	debug ("\n## Get flash bank 1 size @ 0x%08x\n",FLASH_BASE0_PRELIM);
+
+	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	debug ("## Get flash bank 2 size @ 0x%08x\n",FLASH_BASE1_PRELIM);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+			size_b0, size_b0<<20);
+	}
+
+	size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
+
+	debug ("## Prelim. Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+	if (size_b1 > size_b0) {
+		printf ("## ERROR: "
+			"Bank 1 (0x%08lx = %ld MB) > Bank 0 (0x%08lx = %ld MB)\n",
+			size_b1, size_b1<<20,
+			size_b0, size_b0<<20
+		);
+		flash_info[0].flash_id	= FLASH_UNKNOWN;
+		flash_info[1].flash_id	= FLASH_UNKNOWN;
+		flash_info[0].sector_count	= -1;
+		flash_info[1].sector_count	= -1;
+		flash_info[0].size		= 0;
+		flash_info[1].size		= 0;
+		return (0);
+	}
+
+	debug  ("## Before remap: "
+		"BR0: 0x%08x    OR0: 0x%08x    "
+		"BR1: 0x%08x    OR1: 0x%08x\n",
+		memctl->memc_br0, memctl->memc_or0,
+		memctl->memc_br1, memctl->memc_or1);
+
+	/* Remap FLASH according to real size */
+#ifndef	CFG_OR_TIMING_FLASH_AT_50MHZ
+	memctl->memc_or0 = CFG_OR_TIMING_FLASH | (-size_b0 & OR_AM_MSK);
+#else
+	memctl->memc_or0 = flash_or_timing | (-size_b0 & OR_AM_MSK);
+#endif
+	memctl->memc_br0 = (CFG_FLASH_BASE & BR_BA_MSK) | BR_MS_GPCM | BR_V;
+
+	debug ("## BR0: 0x%08x    OR0: 0x%08x\n",
+		memctl->memc_br0, memctl->memc_or0);
+
+	/* Re-do sizing to get full correct info */
+	size_b0 = flash_get_size((vu_long *)CFG_FLASH_BASE, &flash_info[0]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	debug ("Protect monitor: %08lx ... %08lx\n",
+		(ulong)CFG_MONITOR_BASE,
+		(ulong)CFG_MONITOR_BASE + monitor_flash_len - 1);
+
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_MONITOR_BASE,
+		      CFG_MONITOR_BASE + monitor_flash_len - 1,
+		      &flash_info[0]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+# ifdef CFG_ENV_ADDR_REDUND
+	debug ("Protect primary   environment: %08lx ... %08lx\n",
+		(ulong)CFG_ENV_ADDR,
+		(ulong)CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1);
+# else
+	debug ("Protect environment: %08lx ... %08lx\n",
+		(ulong)CFG_ENV_ADDR,
+		(ulong)CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1);
+# endif
+
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR,
+		      CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+		      &flash_info[0]);
+#endif
+
+#ifdef CFG_ENV_ADDR_REDUND
+	debug ("Protect redundand environment: %08lx ... %08lx\n",
+		(ulong)CFG_ENV_ADDR_REDUND,
+		(ulong)CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1);
+
+	flash_protect(FLAG_PROTECT_SET,
+		      CFG_ENV_ADDR_REDUND,
+		      CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+		      &flash_info[0]);
+#endif
+
+	if (size_b1) {
+#ifndef	CFG_OR_TIMING_FLASH_AT_50MHZ
+		memctl->memc_or1 = CFG_OR_TIMING_FLASH | (-size_b1 & 0xFFFF8000);
+#else
+		memctl->memc_or1 = flash_or_timing | (-size_b1 & 0xFFFF8000);
+#endif
+		memctl->memc_br1 = ((CFG_FLASH_BASE + size_b0) & BR_BA_MSK) |
+				    BR_MS_GPCM | BR_V;
+
+		debug ("## BR1: 0x%08x    OR1: 0x%08x\n",
+			memctl->memc_br1, memctl->memc_or1);
+
+		/* Re-do sizing to get full correct info */
+		size_b1 = flash_get_size((vu_long *)(CFG_FLASH_BASE + size_b0),
+					  &flash_info[1]);
+
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+		/* monitor protection ON by default */
+		flash_protect(FLAG_PROTECT_SET,
+			      CFG_MONITOR_BASE,
+			      CFG_MONITOR_BASE+monitor_flash_len-1,
+			      &flash_info[1]);
+#endif
+
+#ifdef	CFG_ENV_IS_IN_FLASH
+		/* ENV protection ON by default */
+		flash_protect(FLAG_PROTECT_SET,
+			      CFG_ENV_ADDR,
+			      CFG_ENV_ADDR+CFG_ENV_SIZE-1,
+			      &flash_info[1]);
+#endif
+	} else {
+		memctl->memc_br1 = 0;		/* invalidate bank */
+
+		flash_info[1].flash_id = FLASH_UNKNOWN;
+		flash_info[1].sector_count = -1;
+		flash_info[1].size = 0;
+
+		debug ("## DISABLE BR1: 0x%08x    OR1: 0x%08x\n",
+			memctl->memc_br1, memctl->memc_or1);
+	}
+
+	debug ("## Final Flash bank sizes: %08lx + 0x%08lx\n",size_b0,size_b1);
+
+	flash_info[0].size = size_b0;
+	flash_info[1].size = size_b1;
+
+	return (size_b0 + size_b1);
+}
+
+/*-----------------------------------------------------------------------
+ */
+void flash_print_info  (flash_info_t *info)
+{
+	int i;
+
+	if (info->flash_id == FLASH_UNKNOWN) {
+		printf ("missing or unknown FLASH type\n");
+		return;
+	}
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case FLASH_MAN_AMD:	printf ("AMD ");		break;
+	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
+	default:		printf ("Unknown Vendor ");	break;
+	}
+
+	switch (info->flash_id & FLASH_TYPEMASK) {
+#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
+	case FLASH_AMLV128U:	printf ("AM29LV128ML (128Mbit, uniform sector size)\n");
+				break;
+	case FLASH_AMLV320U:	printf ("AM29LV320ML (32Mbit, uniform sector size)\n");
+				break;
+	case FLASH_AMLV640U:	printf ("AM29LV640ML (64Mbit, uniform sector size)\n");
+				break;
+	case FLASH_AMLV320B:	printf ("AM29LV320MB (32Mbit, bottom boot sect)\n");
+				break;
+# else	/* ! TQM8xxM */
+	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
+				break;
+#endif	/* TQM8xxM */
+	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
+				break;
+	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
+				break;
+	case FLASH_AMDL163B:	printf ("AM29DL163B (16 Mbit, bottom boot sect)\n");
+				break;
+	default:		printf ("Unknown Chip Type\n");
+				break;
+	}
+
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
+
+	printf ("  Sector Start Addresses:");
+	for (i=0; i<info->sector_count; ++i) {
+		if ((i % 5) == 0)
+			printf ("\n   ");
+		printf (" %08lX%s",
+			info->start[i],
+			info->protect[i] ? " (RO)" : "     "
+		);
+	}
+	printf ("\n");
+	return;
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+
+/*-----------------------------------------------------------------------
+ */
+
+/*
+ * The following code cannot be run from FLASH!
+ */
+
+static ulong flash_get_size (vu_long *addr, flash_info_t *info)
+{
+	short i;
+	ulong value;
+	ulong base = (ulong)addr;
+
+	/* Write auto select command: read Manufacturer ID */
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+	addr[0x0555] = 0x00900090;
+
+	value = addr[0];
+
+	debug ("Manuf. ID @ 0x%08lx: 0x%08lx\n", (ulong)addr, value);
+
+	switch (value) {
+	case AMD_MANUFACT:
+		debug ("Manufacturer: AMD\n");
+		info->flash_id = FLASH_MAN_AMD;
+		break;
+	case FUJ_MANUFACT:
+		debug ("Manufacturer: FUJITSU\n");
+		info->flash_id = FLASH_MAN_FUJ;
+		break;
+	default:
+		debug ("Manufacturer: *** unknown ***\n");
+		info->flash_id = FLASH_UNKNOWN;
+		info->sector_count = 0;
+		info->size = 0;
+		return (0);			/* no or unknown flash	*/
+	}
+
+	value = addr[1];			/* device ID		*/
+
+	debug ("Device ID @ 0x%08lx: 0x%08lx\n", (ulong)(&addr[1]), value);
+
+	switch (value) {
+#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
+	case AMD_ID_MIRROR:
+		debug ("Mirror Bit flash: addr[14] = %08lX  addr[15] = %08lX\n",
+			addr[14], addr[15]);
+		/* Special case for AMLV320MH/L */
+		if ((addr[14] & 0x00ff00ff) == 0x001d001d &&
+		    (addr[15] & 0x00ff00ff) == 0x00000000) {
+			debug ("Chip: AMLV320MH/L\n");
+			info->flash_id += FLASH_AMLV320U;
+			info->sector_count = 64;
+			info->size = 0x00800000;	/* => 8 MB */
+			break;
+		}
+		switch(addr[14]) {
+		case AMD_ID_LV128U_2:
+			if (addr[15] != AMD_ID_LV128U_3) {
+				debug ("Chip: AMLV128U -> unknown\n");
+				info->flash_id = FLASH_UNKNOWN;
+			} else {
+				debug ("Chip: AMLV128U\n");
+				info->flash_id += FLASH_AMLV128U;
+				info->sector_count = 256;
+				info->size = 0x02000000;
+			}
+			break;				/* => 32 MB	*/
+		case AMD_ID_LV640U_2:
+			if (addr[15] != AMD_ID_LV640U_3) {
+				debug ("Chip: AMLV640U -> unknown\n");
+				info->flash_id = FLASH_UNKNOWN;
+			} else {
+				debug ("Chip: AMLV640U\n");
+				info->flash_id += FLASH_AMLV640U;
+				info->sector_count = 128;
+				info->size = 0x01000000;
+			}
+			break;				/* => 16 MB	*/
+		case AMD_ID_LV320B_2:
+			if (addr[15] != AMD_ID_LV320B_3) {
+				debug ("Chip: AMLV320B -> unknown\n");
+				info->flash_id = FLASH_UNKNOWN;
+			} else {
+				debug ("Chip: AMLV320B\n");
+				info->flash_id += FLASH_AMLV320B;
+				info->sector_count = 71;
+				info->size = 0x00800000;
+			}
+			break;				/* =>  8 MB	*/
+		default:
+			debug ("Chip: *** unknown ***\n");
+			info->flash_id = FLASH_UNKNOWN;
+			break;
+		}
+		break;
+# else	/* ! TQM8xxM */
+	case AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;					/* => 1 MB		*/
+
+	case AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00100000;
+		break;					/* => 1 MB		*/
+
+	case AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;					/* => 2 MB	*/
+
+	case AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00200000;
+		break;					/* => 2 MB	*/
+
+	case AMD_ID_LV320T:
+		info->flash_id += FLASH_AM320T;
+		info->sector_count = 71;
+		info->size = 0x00800000;
+		break;					/* => 8 MB	*/
+
+	case AMD_ID_LV320B:
+		info->flash_id += FLASH_AM320B;
+		info->sector_count = 71;
+		info->size = 0x00800000;
+		break;					/* => 8 MB	*/
+#endif	/* TQM8xxM */
+
+	case AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;					/* => 4 MB	*/
+
+	case AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00400000;
+		break;					/* => 4 MB	*/
+
+	case AMD_ID_DL163B:
+		info->flash_id += FLASH_AMDL163B;
+		info->sector_count = 39;
+		info->size = 0x00400000;
+		break;					/* => 4 MB	*/
+
+	default:
+		info->flash_id = FLASH_UNKNOWN;
+		return (0);			/* => no or unknown flash */
+	}
+
+	/* set up sector start address table */
+	switch (value) {
+#ifdef CONFIG_TQM8xxM	/* mirror bit flash */
+	case AMD_ID_MIRROR:
+		switch (info->flash_id & FLASH_TYPEMASK) {
+			/* only known types here - no default */
+		case FLASH_AMLV128U:
+		case FLASH_AMLV640U:
+		case FLASH_AMLV320U:
+			for (i = 0; i < info->sector_count; i++) {
+				info->start[i] = base;
+				base += 0x20000;
+			}
+			break;
+		case FLASH_AMLV320B:
+			for (i = 0; i < info->sector_count; i++) {
+				info->start[i] = base;
+				/*
+				 * The first 8 sectors are 8 kB,
+				 * all the other ones  are 64 kB
+				 */
+				base += (i < 8)
+					?  2 * ( 8 << 10)
+					:  2 * (64 << 10);
+			}
+			break;
+		}
+		break;
+# else	/* ! TQM8xxM */
+	case AMD_ID_LV400B:
+	case AMD_ID_LV800B:
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00008000;
+		info->start[2] = base + 0x0000C000;
+		info->start[3] = base + 0x00010000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00020000) - 0x00060000;
+		}
+		break;
+	case AMD_ID_LV400T:
+	case AMD_ID_LV800T:
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000C000;
+		info->start[i--] = base + info->size - 0x00010000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00020000;
+		}
+		break;
+	case AMD_ID_LV320B:
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base;
+			/*
+			 * The first 8 sectors are 8 kB,
+			 * all the other ones  are 64 kB
+			 */
+			base += (i < 8)
+				?  2 * ( 8 << 10)
+				:  2 * (64 << 10);
+		}
+		break;
+	case AMD_ID_LV320T:
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base;
+			/*
+			 * The last 8 sectors are 8 kB,
+			 * all the other ones  are 64 kB
+			 */
+			base += (i < (info->sector_count - 8))
+				?  2 * (64 << 10)
+				:  2 * ( 8 << 10);
+		}
+		break;
+#endif	/* TQM8xxM */
+	case AMD_ID_LV160B:
+		/* set sector offsets for bottom boot block type	*/
+		info->start[0] = base + 0x00000000;
+		info->start[1] = base + 0x00008000;
+		info->start[2] = base + 0x0000C000;
+		info->start[3] = base + 0x00010000;
+		for (i = 4; i < info->sector_count; i++) {
+			info->start[i] = base + (i * 0x00020000) - 0x00060000;
+		}
+		break;
+	case AMD_ID_LV160T:
+		/* set sector offsets for top boot block type		*/
+		i = info->sector_count - 1;
+		info->start[i--] = base + info->size - 0x00008000;
+		info->start[i--] = base + info->size - 0x0000C000;
+		info->start[i--] = base + info->size - 0x00010000;
+		for (; i >= 0; i--) {
+			info->start[i] = base + i * 0x00020000;
+		}
+		break;
+	case AMD_ID_DL163B:
+		for (i = 0; i < info->sector_count; i++) {
+			info->start[i] = base;
+			/*
+			 * The first 8 sectors are 8 kB,
+			 * all the other ones  are 64 kB
+			 */
+			base += (i < 8)
+				?  2 * ( 8 << 10)
+				:  2 * (64 << 10);
+		}
+		break;
+	default:
+		return (0);
+		break;
+	}
+
+#if 0
+	/* check for protected sectors */
+	for (i = 0; i < info->sector_count; i++) {
+		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
+		/* D0 = 1 if protected */
+		addr = (volatile unsigned long *)(info->start[i]);
+		info->protect[i] = addr[2] & 1;
+	}
+#endif
+
+	/*
+	 * Prevent writes to uninitialized FLASH.
+	 */
+	if (info->flash_id != FLASH_UNKNOWN) {
+		addr = (volatile unsigned long *)info->start[0];
+
+		*addr = 0x00F000F0;	/* reset bank */
+	}
+
+	return (info->size);
+}
+
+
+/*-----------------------------------------------------------------------
+ */
+
+int	flash_erase (flash_info_t *info, int s_first, int s_last)
+{
+	vu_long *addr = (vu_long*)(info->start[0]);
+	int flag, prot, sect, l_sect;
+	ulong start, now, last;
+
+	debug ("flash_erase: first: %d last: %d\n", s_first, s_last);
+
+	if ((s_first < 0) || (s_first > s_last)) {
+		if (info->flash_id == FLASH_UNKNOWN) {
+			printf ("- missing\n");
+		} else {
+			printf ("- no sectors to erase\n");
+		}
+		return 1;
+	}
+
+	if ((info->flash_id == FLASH_UNKNOWN) ||
+	    (info->flash_id > FLASH_AMD_COMP)) {
+		printf ("Can't erase unknown flash type %08lx - aborted\n",
+			info->flash_id);
+		return 1;
+	}
+
+	prot = 0;
+	for (sect=s_first; sect<=s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
+		}
+	}
+
+	if (prot) {
+		printf ("- Warning: %d protected sectors will not be erased!\n",
+			prot);
+	} else {
+		printf ("\n");
+	}
+
+	l_sect = -1;
+
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+	addr[0x0555] = 0x00800080;
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect<=s_last; sect++) {
+		if (info->protect[sect] == 0) {	/* not protected */
+			addr = (vu_long*)(info->start[sect]);
+			addr[0] = 0x00300030;
+			l_sect = sect;
+		}
+	}
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* wait at least 80us - let's wait 1 ms */
+	udelay (1000);
+
+	/*
+	 * We wait for the last triggered sector
+	 */
+	if (l_sect < 0)
+		goto DONE;
+
+	start = get_timer (0);
+	last  = start;
+	addr = (vu_long*)(info->start[l_sect]);
+	while ((addr[0] & 0x00800080) != 0x00800080) {
+		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
+			printf ("Timeout\n");
+			return 1;
+		}
+		/* show that we're waiting */
+		if ((now - last) > 1000) {	/* every second */
+			putc ('.');
+			last = now;
+		}
+	}
+
+DONE:
+	/* reset to read mode */
+	addr = (volatile unsigned long *)info->start[0];
+	addr[0] = 0x00F000F0;	/* reset bank */
+
+	printf (" done\n");
+	return 0;
+}
+
+/*-----------------------------------------------------------------------
+ * Copy memory to flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+
+int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+{
+	ulong cp, wp, data;
+	int i, l, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i=0, cp=wp; i<l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+		for (; i<4 && cnt>0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt==0 && i<4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *)cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
+	}
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = 0;
+		for (i=0; i<4; ++i) {
+			data = (data << 8) | *src++;
+		}
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp  += 4;
+		cnt -= 4;
+	}
+
+	if (cnt == 0) {
+		return (0);
+	}
+
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
+		data = (data << 8) | *src++;
+		--cnt;
+	}
+	for (; i<4; ++i, ++cp) {
+		data = (data << 8) | (*(uchar *)cp);
+	}
+
+	return (write_word(info, wp, data));
+}
+
+/*-----------------------------------------------------------------------
+ * Write a word to Flash, returns:
+ * 0 - OK
+ * 1 - write timeout
+ * 2 - Flash not erased
+ */
+static int write_word (flash_info_t *info, ulong dest, ulong data)
+{
+	vu_long *addr = (vu_long*)(info->start[0]);
+	ulong start;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased */
+	if ((*((vu_long *)dest) & data) != data) {
+		return (2);
+	}
+	/* Disable interrupts which might cause a timeout here */
+	flag = disable_interrupts();
+
+	addr[0x0555] = 0x00AA00AA;
+	addr[0x02AA] = 0x00550055;
+	addr[0x0555] = 0x00A000A0;
+
+	*((vu_long *)dest) = data;
+
+	/* re-enable interrupts if necessary */
+	if (flag)
+		enable_interrupts();
+
+	/* data polling for D7 */
+	start = get_timer (0);
+	while ((*((vu_long *)dest) & 0x00800080) != (data & 0x00800080)) {
+		if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
+			return (1);
+		}
+	}
+	return (0);
+}
+
+/*-----------------------------------------------------------------------
+ */
+
+#endif /* !defined(CFG_FLASH_CFI_DRIVER) */
diff --git a/board/tqc/tqm8xx/load_sernum_ethaddr.c b/board/tqc/tqm8xx/load_sernum_ethaddr.c
new file mode 100644
index 0000000000..143f36801d
--- /dev/null
+++ b/board/tqc/tqm8xx/load_sernum_ethaddr.c
@@ -0,0 +1,105 @@
+/*
+ * (C) Copyright 2000, 2001, 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <mpc8xx.h>
+
+/*-----------------------------------------------------------------------
+ * Process Hardware Information Block:
+ *
+ * If we boot on a system fresh from factory, check if the Hardware
+ * Information Block exists and save the information it contains.
+ *
+ * The TQM8xxL / TQM82xx Hardware Information Block is defined as
+ * follows:
+ * - located in first flash bank
+ * - starts at offset 0x0003FFC0
+ * - size 0x00000040
+ *
+ * Internal structure:
+ * - sequence of ASCII character strings
+ * - fields separated by a single space character (0x20)
+ * - last field terminated by NUL character (0x00)
+ * - remaining space filled with NUL characters (0x00)
+ *
+ * Fields in Hardware Information Block:
+ * 1) Module Type
+ * 2) Serial Number
+ * 3) First MAC Address
+ * 4) Number of additional MAC addresses
+ */
+
+void load_sernum_ethaddr (void)
+{
+	unsigned char *hwi;
+	unsigned char  serial [CFG_HWINFO_SIZE];
+	unsigned char  ethaddr[CFG_HWINFO_SIZE];
+	unsigned short ih, is, ie, part;
+
+	hwi = (unsigned char *)(CFG_FLASH_BASE + CFG_HWINFO_OFFSET);
+	ih = is = ie = 0;
+
+	if (*((unsigned long *)hwi) != (unsigned long)CFG_HWINFO_MAGIC) {
+		return;
+	}
+
+	part = 1;
+
+	/* copy serial # / MAC address */
+	while ((hwi[ih] != '\0') && (ih < CFG_HWINFO_SIZE)) {
+		if (hwi[ih] < ' ' || hwi[ih] > '~') { /* ASCII strings! */
+			return;
+		}
+		switch (part) {
+		default:		/* Copy serial # */
+			if (hwi[ih] == ' ') {
+				++part;
+			}
+			serial[is++] = hwi[ih];
+			break;
+		case 3:			/* Copy MAC address */
+			if (hwi[ih] == ' ') {
+				++part;
+				break;
+			}
+			ethaddr[ie++] = hwi[ih];
+			if ((ie % 3) == 2)
+				ethaddr[ie++] = ':';
+			break;
+		}
+		++ih;
+	}
+	serial[is]  = '\0';
+	if (ie && ethaddr[ie-1] == ':')
+		--ie;
+	ethaddr[ie] = '\0';
+
+	/* set serial# and ethaddr if not yet defined */
+	if (getenv("serial#") == NULL) {
+		setenv ((char *)"serial#", (char *)serial);
+	}
+
+	if (getenv("ethaddr") == NULL) {
+		setenv ((char *)"ethaddr", (char *)ethaddr);
+	}
+}
diff --git a/board/tqc/tqm8xx/tqm8xx.c b/board/tqc/tqm8xx/tqm8xx.c
new file mode 100644
index 0000000000..18bf2a8302
--- /dev/null
+++ b/board/tqc/tqm8xx/tqm8xx.c
@@ -0,0 +1,554 @@
+/*
+ * (C) Copyright 2000-2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#if 0
+#define DEBUG
+#endif
+
+#include <common.h>
+#include <mpc8xx.h>
+#ifdef CONFIG_PS2MULT
+#include <ps2mult.h>
+#endif
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static long int dram_size (long int, long int *, long int);
+
+#define	_NOT_USED_	0xFFFFFFFF
+
+/* UPM initialization table for SDRAM: 40, 50, 66 MHz CLKOUT @ CAS latency 2, tWR=2 */
+const uint sdram_table[] =
+{
+	/*
+	 * Single Read. (Offset 0 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x11AF7C04, 0xEFBAFC00,
+	0x1FF5FC47, /* last */
+	/*
+	 * SDRAM Initialization (offset 5 in UPMA RAM)
+	 *
+	 * This is no UPM entry point. The following definition uses
+	 * the remaining space to establish an initialization
+	 * sequence, which is executed by a RUN command.
+	 *
+	 */
+		    0x1FF5FC34, 0xEFEABC34, 0x1FB57C35, /* last */
+	/*
+	 * Burst Read. (Offset 8 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEAFBC04, 0x10AF7C04, 0xF0AFFC00,
+	0xF0AFFC00, 0xF1AFFC00, 0xEFBAFC00, 0x1FF5FC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Single Write. (Offset 18 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEABBC00, 0x11B77C04, 0xEFFAFC44,
+	0x1FF5FC47, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Burst Write. (Offset 20 in UPMA RAM)
+	 */
+	0x1F0DFC04, 0xEEABBC00, 0x10A77C00, 0xF0AFFC00,
+	0xF0AFFC00, 0xF0AFFC04, 0xE1BAFC44, 0x1FF5FC47, /* last */
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Refresh  (Offset 30 in UPMA RAM)
+	 */
+	0x1FFD7C84, 0xFFFFFC04, 0xFFFFFC04, 0xFFFFFC04,
+	0xFFFFFC84, 0xFFFFFC07, /* last */
+				_NOT_USED_, _NOT_USED_,
+	_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
+	/*
+	 * Exception. (Offset 3c in UPMA RAM)
+	 */
+	0xFFFFFC07, /* last */
+		    _NOT_USED_, _NOT_USED_, _NOT_USED_,
+};
+
+/* ------------------------------------------------------------------------- */
+
+
+/*
+ * Check Board Identity:
+ *
+ * Test TQ ID string (TQM8xx...)
+ * If present, check for "L" type (no second DRAM bank),
+ * otherwise "L" type is assumed as default.
+ *
+ * Set board_type to 'L' for "L" type, 'M' for "M" type, 0 else.
+ */
+
+int checkboard (void)
+{
+	char *s = getenv ("serial#");
+
+	puts ("Board: ");
+
+	if (!s || strncmp (s, "TQM8", 4)) {
+		puts ("### No HW ID - assuming TQM8xxL\n");
+		return (0);
+	}
+
+	if ((*(s + 6) == 'L')) {	/* a TQM8xxL type */
+		gd->board_type = 'L';
+	}
+
+	if ((*(s + 6) == 'M')) {	/* a TQM8xxM type */
+		gd->board_type = 'M';
+	}
+
+	if ((*(s + 6) == 'D')) {	/* a TQM885D type */
+		gd->board_type = 'D';
+	}
+
+	for (; *s; ++s) {
+		if (*s == ' ')
+			break;
+		putc (*s);
+	}
+#ifdef CONFIG_VIRTLAB2
+	puts (" (Virtlab2)");
+#endif
+	putc ('\n');
+
+	return (0);
+}
+
+/* ------------------------------------------------------------------------- */
+
+long int initdram (int board_type)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+	long int size8, size9, size10;
+	long int size_b0 = 0;
+	long int size_b1 = 0;
+
+	upmconfig (UPMA, (uint *) sdram_table,
+			   sizeof (sdram_table) / sizeof (uint));
+
+	/*
+	 * Preliminary prescaler for refresh (depends on number of
+	 * banks): This value is selected for four cycles every 62.4 us
+	 * with two SDRAM banks or four cycles every 31.2 us with one
+	 * bank. It will be adjusted after memory sizing.
+	 */
+	memctl->memc_mptpr = CFG_MPTPR_2BK_8K;
+
+	/*
+	 * The following value is used as an address (i.e. opcode) for
+	 * the LOAD MODE REGISTER COMMAND during SDRAM initialisation. If
+	 * the port size is 32bit the SDRAM does NOT "see" the lower two
+	 * address lines, i.e. mar=0x00000088 -> opcode=0x00000022 for
+	 * MICRON SDRAMs:
+	 * ->    0 00 010 0 010
+	 *       |  |   | |   +- Burst Length = 4
+	 *       |  |   | +----- Burst Type   = Sequential
+	 *       |  |   +------- CAS Latency  = 2
+	 *       |  +----------- Operating Mode = Standard
+	 *       +-------------- Write Burst Mode = Programmed Burst Length
+	 */
+	memctl->memc_mar = 0x00000088;
+
+	/*
+	 * Map controller banks 2 and 3 to the SDRAM banks 2 and 3 at
+	 * preliminary addresses - these have to be modified after the
+	 * SDRAM size has been determined.
+	 */
+	memctl->memc_or2 = CFG_OR2_PRELIM;
+	memctl->memc_br2 = CFG_BR2_PRELIM;
+
+#ifndef	CONFIG_CAN_DRIVER
+	if ((board_type != 'L') &&
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
+		memctl->memc_or3 = CFG_OR3_PRELIM;
+		memctl->memc_br3 = CFG_BR3_PRELIM;
+	}
+#endif							/* CONFIG_CAN_DRIVER */
+
+	memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE));	/* no refresh yet */
+
+	udelay (200);
+
+	/* perform SDRAM initializsation sequence */
+
+	memctl->memc_mcr = 0x80004105;	/* SDRAM bank 0 */
+	udelay (1);
+	memctl->memc_mcr = 0x80004230;	/* SDRAM bank 0 - execute twice */
+	udelay (1);
+
+#ifndef	CONFIG_CAN_DRIVER
+	if ((board_type != 'L') &&
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
+		memctl->memc_mcr = 0x80006105;	/* SDRAM bank 1 */
+		udelay (1);
+		memctl->memc_mcr = 0x80006230;	/* SDRAM bank 1 - execute twice */
+		udelay (1);
+	}
+#endif							/* CONFIG_CAN_DRIVER */
+
+	memctl->memc_mamr |= MAMR_PTAE;	/* enable refresh */
+
+	udelay (1000);
+
+	/*
+	 * Check Bank 0 Memory Size for re-configuration
+	 *
+	 * try 8 column mode
+	 */
+	size8 = dram_size (CFG_MAMR_8COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size8 >> 20);
+
+	udelay (1000);
+
+	/*
+	 * try 9 column mode
+	 */
+	size9 = dram_size (CFG_MAMR_9COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size9 >> 20);
+
+	udelay(1000);
+
+#if defined(CFG_MAMR_10COL)
+	/*
+	 * try 10 column mode
+	 */
+	size10 = dram_size (CFG_MAMR_10COL, SDRAM_BASE2_PRELIM, SDRAM_MAX_SIZE);
+	debug ("SDRAM Bank 0 in 10 column mode: %ld MB\n", size10 >> 20);
+#else
+	size10 = 0;
+#endif /* CFG_MAMR_10COL */
+
+	if ((size8 < size10) && (size9 < size10)) {
+		size_b0 = size10;
+	} else if ((size8 < size9) && (size10 < size9)) {
+		size_b0 = size9;
+		memctl->memc_mamr = CFG_MAMR_9COL;
+		udelay (500);
+	} else {
+		size_b0 = size8;
+		memctl->memc_mamr = CFG_MAMR_8COL;
+		udelay (500);
+	}
+	debug ("SDRAM Bank 0: %ld MB\n", size_b0 >> 20);
+
+#ifndef	CONFIG_CAN_DRIVER
+	if ((board_type != 'L') &&
+	    (board_type != 'M') &&
+	    (board_type != 'D') ) {	/* only one SDRAM bank on L, M and D modules */
+		/*
+		 * Check Bank 1 Memory Size
+		 * use current column settings
+		 * [9 column SDRAM may also be used in 8 column mode,
+		 *  but then only half the real size will be used.]
+		 */
+		size_b1 = dram_size (memctl->memc_mamr, (long int *)SDRAM_BASE3_PRELIM,
+				     SDRAM_MAX_SIZE);
+		debug ("SDRAM Bank 1: %ld MB\n", size_b1 >> 20);
+	} else {
+		size_b1 = 0;
+	}
+#endif	/* CONFIG_CAN_DRIVER */
+
+	udelay (1000);
+
+	/*
+	 * Adjust refresh rate depending on SDRAM type, both banks
+	 * For types > 128 MBit leave it at the current (fast) rate
+	 */
+	if ((size_b0 < 0x02000000) && (size_b1 < 0x02000000)) {
+		/* reduce to 15.6 us (62.4 us / quad) */
+		memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
+		udelay (1000);
+	}
+
+	/*
+	 * Final mapping: map bigger bank first
+	 */
+	if (size_b1 > size_b0) {	/* SDRAM Bank 1 is bigger - map first   */
+
+		memctl->memc_or3 = ((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_br3 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+		if (size_b0 > 0) {
+			/*
+			 * Position Bank 0 immediately above Bank 1
+			 */
+			memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			memctl->memc_br2 = ((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					   + size_b1;
+		} else {
+			unsigned long reg;
+
+			/*
+			 * No bank 0
+			 *
+			 * invalidate bank
+			 */
+			memctl->memc_br2 = 0;
+
+			/* adjust refresh rate depending on SDRAM type, one bank */
+			reg = memctl->memc_mptpr;
+			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			memctl->memc_mptpr = reg;
+		}
+
+	} else {					/* SDRAM Bank 0 is bigger - map first   */
+
+		memctl->memc_or2 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+		memctl->memc_br2 =
+				(CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+
+		if (size_b1 > 0) {
+			/*
+			 * Position Bank 1 immediately above Bank 0
+			 */
+			memctl->memc_or3 =
+					((-size_b1) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
+			memctl->memc_br3 =
+					((CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V)
+					+ size_b0;
+		} else {
+			unsigned long reg;
+
+#ifndef	CONFIG_CAN_DRIVER
+			/*
+			 * No bank 1
+			 *
+			 * invalidate bank
+			 */
+			memctl->memc_br3 = 0;
+#endif							/* CONFIG_CAN_DRIVER */
+
+			/* adjust refresh rate depending on SDRAM type, one bank */
+			reg = memctl->memc_mptpr;
+			reg >>= 1;			/* reduce to CFG_MPTPR_1BK_8K / _4K */
+			memctl->memc_mptpr = reg;
+		}
+	}
+
+	udelay (10000);
+
+#ifdef	CONFIG_CAN_DRIVER
+	/* UPM initialization for CAN @ CLKOUT <= 66 MHz */
+
+	/* Initialize OR3 / BR3 */
+	memctl->memc_or3 = CFG_OR3_CAN;
+	memctl->memc_br3 = CFG_BR3_CAN;
+
+	/* Initialize MBMR */
+	memctl->memc_mbmr = MBMR_GPL_B4DIS;	/* GPL_B4 ouput line Disable */
+
+	/* Initialize UPMB for CAN: single read */
+	memctl->memc_mdr = 0xFFFFCC04;
+	memctl->memc_mcr = 0x0100 | UPMB;
+
+	memctl->memc_mdr = 0x0FFFD004;
+	memctl->memc_mcr = 0x0101 | UPMB;
+
+	memctl->memc_mdr = 0x0FFFC000;
+	memctl->memc_mcr = 0x0102 | UPMB;
+
+	memctl->memc_mdr = 0x3FFFC004;
+	memctl->memc_mcr = 0x0103 | UPMB;
+
+	memctl->memc_mdr = 0xFFFFDC07;
+	memctl->memc_mcr = 0x0104 | UPMB;
+
+	/* Initialize UPMB for CAN: single write */
+	memctl->memc_mdr = 0xFFFCCC04;
+	memctl->memc_mcr = 0x0118 | UPMB;
+
+	memctl->memc_mdr = 0xCFFCDC04;
+	memctl->memc_mcr = 0x0119 | UPMB;
+
+	memctl->memc_mdr = 0x3FFCC000;
+	memctl->memc_mcr = 0x011A | UPMB;
+
+	memctl->memc_mdr = 0xFFFCC004;
+	memctl->memc_mcr = 0x011B | UPMB;
+
+	memctl->memc_mdr = 0xFFFDC405;
+	memctl->memc_mcr = 0x011C | UPMB;
+#endif							/* CONFIG_CAN_DRIVER */
+
+#ifdef	CONFIG_ISP1362_USB
+	/* Initialize OR5 / BR5 */
+	memctl->memc_or5 = CFG_OR5_ISP1362;
+	memctl->memc_br5 = CFG_BR5_ISP1362;
+#endif							/* CONFIG_ISP1362_USB */
+
+
+	return (size_b0 + size_b1);
+}
+
+/* ------------------------------------------------------------------------- */
+
+/*
+ * Check memory range for valid RAM. A simple memory test determines
+ * the actually available RAM size between addresses `base' and
+ * `base + maxsize'. Some (not all) hardware errors are detected:
+ * - short between address lines
+ * - short between data lines
+ */
+
+static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+	volatile memctl8xx_t *memctl = &immap->im_memctl;
+
+	memctl->memc_mamr = mamr_value;
+
+	return (get_ram_size(base, maxsize));
+}
+
+/* ------------------------------------------------------------------------- */
+
+#ifdef CONFIG_PS2MULT
+
+#ifdef CONFIG_HMI10
+#define BASE_BAUD ( 1843200 / 16 )
+struct serial_state rs_table[] = {
+	{ BASE_BAUD, 4,  (void*)0xec140000 },
+	{ BASE_BAUD, 2,  (void*)0xec150000 },
+	{ BASE_BAUD, 6,  (void*)0xec160000 },
+	{ BASE_BAUD, 10, (void*)0xec170000 },
+};
+
+#ifdef CONFIG_BOARD_EARLY_INIT_R
+int board_early_init_r (void)
+{
+	ps2mult_early_init();
+	return (0);
+}
+#endif
+#endif /* CONFIG_HMI10 */
+
+#endif /* CONFIG_PS2MULT */
+
+/* ---------------------------------------------------------------------------- */
+/* HMI10 specific stuff								*/
+/* ---------------------------------------------------------------------------- */
+#ifdef CONFIG_HMI10
+
+int misc_init_r (void)
+{
+# ifdef CONFIG_IDE_LED
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	/* Configure PA15 as output port */
+	immap->im_ioport.iop_padir |= 0x0001;
+	immap->im_ioport.iop_paodr |= 0x0001;
+	immap->im_ioport.iop_papar &= ~0x0001;
+	immap->im_ioport.iop_padat &= ~0x0001;	/* turn it off */
+# endif
+	return (0);
+}
+
+# ifdef CONFIG_IDE_LED
+void ide_led (uchar led, uchar status)
+{
+	volatile immap_t *immap = (immap_t *) CFG_IMMR;
+
+	/* We have one led for both pcmcia slots */
+	if (status) {				/* led on */
+		immap->im_ioport.iop_padat |= 0x0001;
+	} else {
+		immap->im_ioport.iop_padat &= ~0x0001;
+	}
+}
+# endif
+#endif	/* CONFIG_HMI10 */
+
+/* ---------------------------------------------------------------------------- */
+/* NSCU specific stuff								*/
+/* ---------------------------------------------------------------------------- */
+#ifdef CONFIG_NSCU
+
+int misc_init_r (void)
+{
+	volatile immap_t *immr = (immap_t *) CFG_IMMR;
+
+	/* wake up ethernet module */
+	immr->im_ioport.iop_pcpar &= ~0x0004; /* GPIO pin	*/
+	immr->im_ioport.iop_pcdir |=  0x0004; /* output		*/
+	immr->im_ioport.iop_pcso  &= ~0x0004; /* for clarity	*/
+	immr->im_ioport.iop_pcdat |=  0x0004; /* enable		*/
+
+	return (0);
+}
+#endif	/* CONFIG_NSCU */
+
+/* ---------------------------------------------------------------------------- */
+/* TK885D specific initializaion						*/
+/* ---------------------------------------------------------------------------- */
+#ifdef CONFIG_TK885D
+#include <miiphy.h>
+int last_stage_init(void)
+{
+	const unsigned char phy[] = {CONFIG_FEC1_PHY, CONFIG_FEC2_PHY};
+	unsigned short reg;
+	int ret, i = 100;
+	char *s;
+
+	mii_init();
+	/* Without this delay 0xff is read from the UART buffer later in
+	 * abortboot() and autoboot is aborted */
+	udelay(10000);
+	while (tstc() && i--)
+		(void)getc();
+
+	/* Check if auto-negotiation is prohibited */
+	s = getenv("phy_auto_nego");
+
+	if (!s || !strcmp(s, "on"))
+		/* Nothing to do - autonegotiation by default */
+		return 0;
+
+	for (i = 0; i < 2; i++) {
+		ret = miiphy_read("FEC ETHERNET", phy[i], PHY_BMCR, &reg);
+		if (ret) {
+			printf("Cannot read BMCR on PHY %d\n", phy[i]);
+			return 0;
+		}
+		/* Auto-negotiation off, hard set full duplex, 100Mbps */
+		ret = miiphy_write("FEC ETHERNET", phy[i],
+				   PHY_BMCR, (reg | PHY_BMCR_100MB |
+					      PHY_BMCR_DPLX) & ~PHY_BMCR_AUTON);
+		if (ret) {
+			printf("Cannot write BMCR on PHY %d\n", phy[i]);
+			return 0;
+		}
+	}
+
+	return 0;
+}
+
+#endif
+
+/* ------------------------------------------------------------------------- */
diff --git a/board/tqc/tqm8xx/u-boot.lds b/board/tqc/tqm8xx/u-boot.lds
new file mode 100644
index 0000000000..8c46e4677f
--- /dev/null
+++ b/board/tqc/tqm8xx/u-boot.lds
@@ -0,0 +1,143 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)	}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)	}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)	}
+  .rela.got      : { *(.rela.got)	}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)	}
+  .rela.bss      : { *(.rela.bss)	}
+  .rel.plt       : { *(.rel.plt)	}
+  .rela.plt      : { *(.rela.plt)	}
+  .init          : { *(.init)		}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o		(.text)
+    cpu/mpc8xx/traps.o		(.text)
+    common/dlmalloc.o		(.text)
+    lib_ppc/ppcstring.o		(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_generic/zlib.o		(.text)
+    lib_ppc/cache.o		(.text)
+    lib_ppc/time.o		(.text)
+
+    . = DEFINED(env_offset) ? env_offset : .;
+    common/environment.o	(.ppcenv)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss (NOLOAD)       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/tqc/tqm8xx/u-boot.lds.debug b/board/tqc/tqm8xx/u-boot.lds.debug
new file mode 100644
index 0000000000..c33581d250
--- /dev/null
+++ b/board/tqc/tqm8xx/u-boot.lds.debug
@@ -0,0 +1,136 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text)	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data)	}
+  .rel.rodata    : { *(.rel.rodata)	}
+  .rela.rodata   : { *(.rela.rodata)	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/mpc8xx/start.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/vsprintf.o	(.text)
+    lib_generic/crc32.o		(.text)
+
+    . = env_offset;
+    common/environment.o(.text)
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}