powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x

There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>

4 files changed, 0 insertions, 266 deletions

diff --git a/board/motionpro/Kconfig b/board/motionpro/Kconfig
deleted file mode 100644
index f624f6c95f..0000000000
--- a/board/motionpro/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-if TARGET_MOTIONPRO
-
-config SYS_BOARD
-	default "motionpro"
-
-config SYS_CONFIG_NAME
-	default "motionpro"
-
-endif
diff --git a/board/motionpro/MAINTAINERS b/board/motionpro/MAINTAINERS
deleted file mode 100644
index 2f8b5cb580..0000000000
--- a/board/motionpro/MAINTAINERS
+++ /dev/null
@@ -1,6 +0,0 @@
-MOTIONPRO BOARD
-#M:	-
-S:	Maintained
-F:	board/motionpro/
-F:	include/configs/motionpro.h
-F:	configs/motionpro_defconfig
diff --git a/board/motionpro/Makefile b/board/motionpro/Makefile
deleted file mode 100644
index 898a384c39..0000000000
--- a/board/motionpro/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# (C) Copyright 2003-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier:	GPL-2.0+
-#
-
-obj-y	:= motionpro.o
diff --git a/board/motionpro/motionpro.c b/board/motionpro/motionpro.c
deleted file mode 100644
index 7883a179e8..0000000000
--- a/board/motionpro/motionpro.c
+++ /dev/null
@@ -1,243 +0,0 @@
-/*
- * (C) Copyright 2003-2007
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * modified for Promess PRO - by Andy Joseph, andy@promessdev.com
- * modified for Promess PRO-Motion - by Robert McCullough, rob@promessdev.com
- * modified by Chris M. Tumas 6/20/06 Change CAS latency to 2 from 3
- * Also changed the refresh for 100MHz operation
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include <mpc5xxx.h>
-#include <miiphy.h>
-#include <libfdt.h>
-
-#if defined(CONFIG_LED_STATUS)
-#include <status_led.h>
-#endif /* CONFIG_LED_STATUS */
-
-DECLARE_GLOBAL_DATA_PTR;
-
-/* Kollmorgen DPR initialization data */
-struct init_elem {
-	unsigned long addr;
-	unsigned len;
-	char *data;
-	} init_seq[] = {
-		{0x500003F2, 2, "\x86\x00"},		/* HW parameter */
-		{0x500003F0, 2, "\x00\x00"},
-		{0x500003EC, 4, "\x00\x80\xc1\x52"},	/* Magic word */
-	};
-
-/*
- * Initialize Kollmorgen DPR
- */
-static void kollmorgen_init(void)
-{
-	unsigned i, j;
-	vu_char *p;
-
-	for (i = 0; i < sizeof(init_seq) / sizeof(struct init_elem); ++i) {
-		p = (vu_char *)init_seq[i].addr;
-		for (j = 0; j < init_seq[i].len; ++j)
-			*(p + j) = *(init_seq[i].data + j);
-	}
-
-	printf("DPR:   Kollmorgen DPR initialized\n");
-}
-
-
-/*
- * Early board initalization.
- */
-int board_early_init_r(void)
-{
-	/* Now, when we are in RAM, disable Boot Chipselect and enable CS0 */
-	*(vu_long *)MPC5XXX_ADDECR &= ~(1 << 25);
-	*(vu_long *)MPC5XXX_ADDECR |= (1 << 16);
-
-	/* Initialize Kollmorgen DPR */
-	kollmorgen_init();
-
-	return 0;
-}
-
-
-/*
- * Additional PHY intialization. After being reset in mpc5xxx_fec_init_phy(),
- * PHY goes into FX mode.  To take it out of the FX mode and switch into
- * desired TX operation, one needs to clear the FX_SEL bit of Mode Control
- * Register.
- */
-void reset_phy(void)
-{
-	unsigned short mode_control;
-
-	miiphy_read("FEC", CONFIG_PHY_ADDR, 0x15, &mode_control);
-	miiphy_write("FEC", CONFIG_PHY_ADDR, 0x15,
-			mode_control & 0xfffe);
-	return;
-}
-
-#ifndef CONFIG_SYS_RAMBOOT
-/*
- * Helper function to initialize SDRAM controller.
- */
-static void sdram_start(int hi_addr)
-{
-	long hi_addr_bit = hi_addr ? 0x01000000 : 0;
-
-	/* unlock mode register */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000000 |
-						hi_addr_bit;
-
-	/* precharge all banks */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000002 |
-						hi_addr_bit;
-
-	/* auto refresh */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
-						hi_addr_bit;
-
-	/* auto refresh, second time */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | 0x80000004 |
-						hi_addr_bit;
-
-	/* set mode register */
-	*(vu_long *)MPC5XXX_SDRAM_MODE = SDRAM_MODE;
-
-	/* normal operation */
-	*(vu_long *)MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
-}
-#endif /* !CONFIG_SYS_RAMBOOT */
-
-
-/*
- * Initalize SDRAM - configure SDRAM controller, detect memory size.
- */
-int dram_init(void)
-{
-	ulong dramsize = 0;
-#ifndef CONFIG_SYS_RAMBOOT
-	ulong test1, test2;
-
-	/* According to AN3221 (MPC5200B SDRAM Initialization and
-	 * Configuration), the SDelay register must be written a value of
-	 * 0x00000004 as the first step of the SDRAM contorller configuration.
-	 */
-	*(vu_long *)MPC5XXX_SDRAM_SDELAY = 0x04;
-
-	/* configure SDRAM start/end for detection */
-	*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x0000001e; /* 2G at 0x0 */
-	*(vu_long *)MPC5XXX_SDRAM_CS1CFG = 0x80000000; /* disabled */
-
-	/* setup config registers */
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG1 = SDRAM_CONFIG1;
-	*(vu_long *)MPC5XXX_SDRAM_CONFIG2 = SDRAM_CONFIG2;
-
-	sdram_start(0);
-	test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	sdram_start(1);
-	test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
-	if (test1 > test2) {
-		sdram_start(0);
-		dramsize = test1;
-	} else {
-		dramsize = test2;
-	}
-
-	/* memory smaller than 1MB is impossible */
-	if (dramsize < (1 << 20))
-		dramsize = 0;
-
-	/* set SDRAM CS0 size according to the amount of RAM found */
-	if (dramsize > 0) {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0x13 +
-			__builtin_ffs(dramsize >> 20) - 1;
-	} else {
-		*(vu_long *)MPC5XXX_SDRAM_CS0CFG = 0; /* disabled */
-	}
-
-	/* let SDRAM CS1 start right after CS0 and disable it */
-	*(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize;
-
-#else /* !CONFIG_SYS_RAMBOOT */
-	/* retrieve size of memory connected to SDRAM CS0 */
-	dramsize = *(vu_long *)MPC5XXX_SDRAM_CS0CFG & 0xFF;
-	if (dramsize >= 0x13)
-		dramsize = (1 << (dramsize - 0x13)) << 20;
-	else
-		dramsize = 0;
-#endif /* CONFIG_SYS_RAMBOOT */
-
-	/* return total ram size */
-	gd->ram_size = dramsize;
-
-	return 0;
-}
-
-
-int checkboard(void)
-{
-	uchar rev = *(vu_char *)CPLD_REV_REGISTER;
-	printf("Board: Promess Motion-PRO board (CPLD rev. 0x%02x)\n", rev);
-	return 0;
-}
-
-
-#ifdef CONFIG_OF_BOARD_SETUP
-int ft_board_setup(void *blob, bd_t *bd)
-{
-	ft_cpu_setup(blob, bd);
-
-	return 0;
-}
-#endif /* CONFIG_OF_BOARD_SETUP */
-
-
-#if defined(CONFIG_LED_STATUS)
-vu_long *regcode_to_regaddr(led_id_t regcode)
-{
-	/* GPT Enable and Mode Select Register address */
-	vu_long *reg_translate[] = {
-					(vu_long *)MPC5XXX_GPT6_ENABLE,
-					(vu_long *)MPC5XXX_GPT7_ENABLE,
-				   };
-
-	if (ARRAY_SIZE(reg_translate) <= regcode)
-		return NULL;
-	return reg_translate[regcode];
-}
-
-void __led_init(led_id_t regcode, int state)
-{
-	vu_long *regaddr = regcode_to_regaddr(regcode);
-
-	*regaddr |= ENABLE_GPIO_OUT;
-
-	if (state == CONFIG_LED_STATUS_ON)
-		*((vu_long *) regaddr) |= LED_ON;
-	else
-		*((vu_long *) regaddr) &= ~LED_ON;
-}
-
-void __led_set(led_id_t regcode, int state)
-{
-	vu_long *regaddr = regcode_to_regaddr(regcode);
-
-	if (state == CONFIG_LED_STATUS_ON)
-		*regaddr |= LED_ON;
-	else
-		*regaddr &= ~LED_ON;
-}
-
-void __led_toggle(led_id_t regcode)
-{
-	vu_long *regaddr = regcode_to_regaddr(regcode);
-
-	*regaddr ^= LED_ON;
-}
-#endif /* CONFIG_LED_STATUS */