diff options
| author | Adam Ford <aford173@gmail.com> | 2019-06-30 17:30:49 -0500 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2019-07-27 13:36:52 -0400 |
| commit | 25e4ff45b17dfb21dedc03b0cf654d83c0fd33fa (patch) | |
| tree | 2e1e628ff61310c3afcbc1d187cf0b954efdcf68 /board/logicpd/omap3som/omap3logic.h | |
| parent | 67a4df9dafcc03d31a5c2a6c3911809d9ad1a221 (diff) | |
| download | u-boot-25e4ff45b17dfb21dedc03b0cf654d83c0fd33fa.tar.gz u-boot-25e4ff45b17dfb21dedc03b0cf654d83c0fd33fa.tar.xz u-boot-25e4ff45b17dfb21dedc03b0cf654d83c0fd33fa.zip | |
ARM: omap3_logic: Enable OMAP EHCI support for SOM-LV Boards
The SOM-LV boards support the OMAP EHCI driver using port 2.
With the driver updated to support device tree, this patch sets
the corresponding pin muxing for the tranceiver as well as the
reset pin.
Signed-off-by: Adam Ford <aford173@gmail.com>
Diffstat (limited to 'board/logicpd/omap3som/omap3logic.h')
| -rw-r--r-- | board/logicpd/omap3som/omap3logic.h | 19 |
1 files changed, 19 insertions, 0 deletions
diff --git a/board/logicpd/omap3som/omap3logic.h b/board/logicpd/omap3som/omap3logic.h index aeb26b90d7..63c2141783 100644 --- a/board/logicpd/omap3som/omap3logic.h +++ b/board/logicpd/omap3som/omap3logic.h @@ -161,12 +161,14 @@ void set_muxconf_regs(void) MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | DIS | M0)); /*ETK_D7*/ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | DIS | M0)); /*ETK_D8*/ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | DIS | M0)); /*ETK_D9*/ +#ifndef CONFIG_USB_EHCI_OMAP /* Torpedo does not use EHCI_OMAP */ MUX_VAL(CP(ETK_D10_ES2), (IEN | PTD | DIS | M0)); /*ETK_D10*/ MUX_VAL(CP(ETK_D11_ES2), (IEN | PTD | DIS | M0)); /*ETK_D11*/ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | DIS | M0)); /*ETK_D12*/ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M0)); /*ETK_D13*/ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M0)); /*ETK_D14*/ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M0)); /*ETK_D15*/ +#endif MUX_VAL(CP(D2D_MCAD1), (IEN | PTD | EN | M0)); /*d2d_mcad1*/ MUX_VAL(CP(D2D_MCAD2), (IEN | PTD | EN | M0)); /*d2d_mcad2*/ @@ -231,6 +233,23 @@ void set_muxconf_regs(void) MUX_VAL(CP(D2D_SREAD), (IEN | PTD | DIS | M0)); /*d2d_sread*/ MUX_VAL(CP(D2D_MBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_mbusflag*/ MUX_VAL(CP(D2D_SBUSFLAG), (IEN | PTD | DIS | M0)); /*d2d_sbusflag*/ + +#ifdef CONFIG_USB_EHCI_OMAP /* SOM-LV Uses EHCI-OMAP */ + MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | DIS | M3)); /*HSUSB2_DATA0*/ + MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | DIS | M3)); /*HSUSB2_DATA1*/ + MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M0)); /*HSUSB2_DATA2*/ + MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M0)); /*HSUSB2_DATA3*/ + MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | DIS | M0)); /*HSUSB2_DATA4*/ + MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | DIS | M0)); /*HSUSB2_DATA5*/ + MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M0)); /*HSUSB2_DATA6*/ + MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | DIS | M0)); /*HSUSB2_DATA7*/ + MUX_VAL(CP(SYS_BOOT2), (IEN | PTD | DIS | M4)) /* GPIO_4 */ + MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_CLK*/ + MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/ + MUX_VAL(CP(ETK_D12_ES2), (IEN | PTU | DIS | M3)); /*HSUSB2_DIR*/ + MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | DIS | M3)); /*HSUSB2_NXT*/ +#endif + } #endif |