Code cleanup for GCC-3.3.x compilers

1 files changed, 268 insertions, 276 deletions

diff --git a/board/impa7/flash.c b/board/impa7/flash.c
index 3e380e5f49..ca76fe8327 100644
--- a/board/impa7/flash.c
+++ b/board/impa7/flash.c
@@ -28,338 +28,330 @@
 #define MAIN_SECT_SIZE  0x20000
 #define PARAM_SECT_SIZE 0x4000
 
-flash_info_t    flash_info[CFG_MAX_FLASH_BANKS];
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];
 
 
 /*-----------------------------------------------------------------------
  */
 
-ulong flash_init(void)
+ulong flash_init (void)
 {
-    int i, j;
-    ulong size = 0;
-
-    for (i = 0; i < CFG_MAX_FLASH_BANKS; i++)
-    {
-	ulong flashbase = 0;
-	flash_info[i].flash_id =
-	  (INTEL_MANUFACT & FLASH_VENDMASK) |
-	  (INTEL_ID_28F320B3T & FLASH_TYPEMASK);
-	flash_info[i].size = FLASH_BANK_SIZE;
-	flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
-	memset(flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
-	if (i == 0)
-	  flashbase = PHYS_FLASH_1;
-	else if (i == 1)
-	  flashbase = PHYS_FLASH_2;
-	else
-	  panic("configured too many flash banks!\n");
-	for (j = 0; j < flash_info[i].sector_count; j++)
-	{
-	    if (j <= 7)
-	    {
-		flash_info[i].start[j] = flashbase + j * PARAM_SECT_SIZE;
-	    }
-	    else
-	    {
-		flash_info[i].start[j] = flashbase + (j - 7)*MAIN_SECT_SIZE;
-	    }
+	int i, j;
+	ulong size = 0;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+		ulong flashbase = 0;
+
+		flash_info[i].flash_id =
+			(INTEL_MANUFACT & FLASH_VENDMASK) |
+			(INTEL_ID_28F320B3T & FLASH_TYPEMASK);
+		flash_info[i].size = FLASH_BANK_SIZE;
+		flash_info[i].sector_count = CFG_MAX_FLASH_SECT;
+		memset (flash_info[i].protect, 0, CFG_MAX_FLASH_SECT);
+		if (i == 0)
+			flashbase = PHYS_FLASH_1;
+		else if (i == 1)
+			flashbase = PHYS_FLASH_2;
+		else
+			panic ("configured too many flash banks!\n");
+		for (j = 0; j < flash_info[i].sector_count; j++) {
+			if (j <= 7) {
+				flash_info[i].start[j] =
+					flashbase + j * PARAM_SECT_SIZE;
+			} else {
+				flash_info[i].start[j] =
+					flashbase + (j - 7) * MAIN_SECT_SIZE;
+			}
+		}
+		size += flash_info[i].size;
 	}
-	size += flash_info[i].size;
-    }
-
-    /* Protect monitor and environment sectors
-     */
-    flash_protect(FLAG_PROTECT_SET,
-		  CFG_FLASH_BASE,
-		  CFG_FLASH_BASE + monitor_flash_len - 1,
-		  &flash_info[0]);
-
-    flash_protect(FLAG_PROTECT_SET,
-		  CFG_ENV_ADDR,
-		  CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
-		  &flash_info[0]);
-
-    return size;
-}
 
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-    int i;
-
-    switch (info->flash_id & FLASH_VENDMASK)
-    {
-    case (INTEL_MANUFACT & FLASH_VENDMASK):
-	printf("Intel: ");
-	break;
-    default:
-	printf("Unknown Vendor ");
-	break;
-    }
-
-    switch (info->flash_id & FLASH_TYPEMASK)
-    {
-    case (INTEL_ID_28F320B3T & FLASH_TYPEMASK):
-	printf("28F320F3B (16Mbit)\n");
-	break;
-    default:
-	printf("Unknown Chip Type\n");
-	goto Done;
-	break;
-    }
-
-    printf("  Size: %ld MB in %d Sectors\n",
-	   info->size >> 20, info->sector_count);
-
-    printf("  Sector Start Addresses:");
-    for (i = 0; i < info->sector_count; i++)
-    {
-	if ((i % 5) == 0)
-	{
-	    printf ("\n   ");
-	}
-	printf (" %08lX%s", info->start[i],
-		info->protect[i] ? " (RO)" : "     ");
-    }
-    printf ("\n");
+	/* Protect monitor and environment sectors
+	 */
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_FLASH_BASE,
+		       CFG_FLASH_BASE + monitor_flash_len - 1,
+		       &flash_info[0]);
+
+	flash_protect (FLAG_PROTECT_SET,
+		       CFG_ENV_ADDR,
+		       CFG_ENV_ADDR + CFG_ENV_SIZE - 1, &flash_info[0]);
 
-Done:
+	return size;
 }
 
 /*-----------------------------------------------------------------------
  */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
+void flash_print_info (flash_info_t * info)
 {
-    int flag, prot, sect;
-    int rc = ERR_OK;
-
-    if (info->flash_id == FLASH_UNKNOWN)
-	return ERR_UNKNOWN_FLASH_TYPE;
+	int i;
+
+	switch (info->flash_id & FLASH_VENDMASK) {
+	case (INTEL_MANUFACT & FLASH_VENDMASK):
+		printf ("Intel: ");
+		break;
+	default:
+		printf ("Unknown Vendor ");
+		break;
+	}
 
-    if ((s_first < 0) || (s_first > s_last)) {
-	return ERR_INVAL;
-    }
+	switch (info->flash_id & FLASH_TYPEMASK) {
+	case (INTEL_ID_28F320B3T & FLASH_TYPEMASK):
+		printf ("28F320F3B (16Mbit)\n");
+		break;
+	default:
+		printf ("Unknown Chip Type\n");
+		goto Done;
+		break;
+	}
 
-    if ((info->flash_id & FLASH_VENDMASK) !=
-	(INTEL_MANUFACT & FLASH_VENDMASK)) {
-	return ERR_UNKNOWN_FLASH_VENDOR;
-    }
+	printf ("  Size: %ld MB in %d Sectors\n",
+		info->size >> 20, info->sector_count);
 
-    prot = 0;
-    for (sect=s_first; sect<=s_last; ++sect) {
-	if (info->protect[sect]) {
-	    prot++;
+	printf ("  Sector Start Addresses:");
+	for (i = 0; i < info->sector_count; i++) {
+		if ((i % 5) == 0) {
+			printf ("\n   ");
+		}
+		printf (" %08lX%s", info->start[i],
+			info->protect[i] ? " (RO)" : "     ");
 	}
-    }
-    if (prot)
-	return ERR_PROTECTED;
+	printf ("\n");
 
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    flag = disable_interrupts();
+      Done:;
+}
 
-    /* Start erase on unprotected sectors */
-    for (sect = s_first; sect<=s_last && !ctrlc(); sect++) {
+/*-----------------------------------------------------------------------
+ */
 
-	printf("Erasing sector %2d ... ", sect);
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+	int flag, prot, sect;
+	int rc = ERR_OK;
 
-	/* arm simple, non interrupt dependent timer */
-	reset_timer_masked();
+	if (info->flash_id == FLASH_UNKNOWN)
+		return ERR_UNKNOWN_FLASH_TYPE;
 
-	if (info->protect[sect] == 0) {	/* not protected */
-	    vu_long *addr = (vu_long *)(info->start[sect]);
+	if ((s_first < 0) || (s_first > s_last)) {
+		return ERR_INVAL;
+	}
 
-	    *addr = 0x00200020;	/* erase setup */
-	    *addr = 0x00D000D0;	/* erase confirm */
+	if ((info->flash_id & FLASH_VENDMASK) !=
+	    (INTEL_MANUFACT & FLASH_VENDMASK)) {
+		return ERR_UNKNOWN_FLASH_VENDOR;
+	}
 
-	    while ((*addr & 0x00800080) != 0x00800080) {
-		if (get_timer_masked() > CFG_FLASH_ERASE_TOUT) {
-		    *addr = 0x00B000B0; /* suspend erase */
-		    *addr = 0x00FF00FF;	/* reset to read mode */
-		    rc = ERR_TIMOUT;
-		    goto outahere;
+	prot = 0;
+	for (sect = s_first; sect <= s_last; ++sect) {
+		if (info->protect[sect]) {
+			prot++;
 		}
-	    }
-
-	    *addr = 0x00FF00FF;	/* reset to read mode */
 	}
-	printf("ok.\n");
-    }
-    if (ctrlc())
-      printf("User Interrupt!\n");
+	if (prot)
+		return ERR_PROTECTED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+	/* Start erase on unprotected sectors */
+	for (sect = s_first; sect <= s_last && !ctrlc (); sect++) {
+
+		printf ("Erasing sector %2d ... ", sect);
+
+		/* arm simple, non interrupt dependent timer */
+		reset_timer_masked ();
+
+		if (info->protect[sect] == 0) {	/* not protected */
+			vu_long *addr = (vu_long *) (info->start[sect]);
+
+			*addr = 0x00200020;	/* erase setup */
+			*addr = 0x00D000D0;	/* erase confirm */
+
+			while ((*addr & 0x00800080) != 0x00800080) {
+				if (get_timer_masked () >
+				    CFG_FLASH_ERASE_TOUT) {
+					*addr = 0x00B000B0;	/* suspend erase */
+					*addr = 0x00FF00FF;	/* reset to read mode */
+					rc = ERR_TIMOUT;
+					goto outahere;
+				}
+			}
+
+			*addr = 0x00FF00FF;	/* reset to read mode */
+		}
+		printf ("ok.\n");
+	}
+	if (ctrlc ())
+		printf ("User Interrupt!\n");
 
-outahere:
+      outahere:
 
-    /* allow flash to settle - wait 10 ms */
-    udelay_masked(10000);
+	/* allow flash to settle - wait 10 ms */
+	udelay_masked (10000);
 
-    if (flag)
-      enable_interrupts();
+	if (flag)
+		enable_interrupts ();
 
-    return rc;
+	return rc;
 }
 
 /*-----------------------------------------------------------------------
  * Copy memory to flash
  */
 
-static int write_word (flash_info_t *info, ulong dest, ulong data)
+static int write_word (flash_info_t * info, ulong dest, ulong data)
 {
-    vu_long *addr = (vu_long *)dest;
-    ulong barf;
-    int rc = ERR_OK;
-    int flag;
-
-    /* Check if Flash is (sufficiently) erased
-     */
-    if ((*addr & data) != data)
-	return ERR_NOT_ERASED;
-
-    /*
-     * Disable interrupts which might cause a timeout
-     * here. Remember that our exception vectors are
-     * at address 0 in the flash, and we don't want a
-     * (ticker) exception to happen while the flash
-     * chip is in programming mode.
-     */
-    flag = disable_interrupts();
-
-    /* clear status register command */
-    *addr = 0x00500050;
-
-    /* program set-up command */
-    *addr = 0x00400040;
-
-    /* latch address/data */
-    *addr = data;
-
-    /* arm simple, non interrupt dependent timer */
-    reset_timer_masked();
-
-    /* read status register command */
-    *addr = 0x00700070;
-
-    /* wait while polling the status register */
-    while((*addr & 0x00800080) != 0x00800080)
-    {
-	if (get_timer_masked() > CFG_FLASH_WRITE_TOUT) {
-	    rc = ERR_TIMOUT;
-	    /* suspend program command */
-	    *addr = 0x00B000B0;
-	    goto outahere;
-	}
+	vu_long *addr = (vu_long *) dest;
+	ulong barf;
+	int rc = ERR_OK;
+	int flag;
+
+	/* Check if Flash is (sufficiently) erased
+	 */
+	if ((*addr & data) != data)
+		return ERR_NOT_ERASED;
+
+	/*
+	 * Disable interrupts which might cause a timeout
+	 * here. Remember that our exception vectors are
+	 * at address 0 in the flash, and we don't want a
+	 * (ticker) exception to happen while the flash
+	 * chip is in programming mode.
+	 */
+	flag = disable_interrupts ();
+
+	/* clear status register command */
+	*addr = 0x00500050;
+
+	/* program set-up command */
+	*addr = 0x00400040;
+
+	/* latch address/data */
+	*addr = data;
+
+	/* arm simple, non interrupt dependent timer */
+	reset_timer_masked ();
+
+	/* read status register command */
+	*addr = 0x00700070;
+
+	/* wait while polling the status register */
+	while ((*addr & 0x00800080) != 0x00800080) {
+		if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+			rc = ERR_TIMOUT;
+			/* suspend program command */
+			*addr = 0x00B000B0;
+			goto outahere;
+		}
 
-	if( *addr & 0x003A003A) {	/* check for error */
-	    barf = *addr;
-	    if( barf & 0x003A0000) {
-		barf >>=16;
-	    } else {
-		barf &= 0x0000003A;
-	    }
-	    printf("\nFlash write error %02lx at address %08lx\n",
-		   barf, (unsigned long)dest);
-	    if(barf & 0x0002) {
-		printf("Block locked, not erased.\n");
-		rc = ERR_NOT_ERASED;
-		goto outahere;
-	    }
-	    if(barf & 0x0010) {
-		printf("Programming error.\n");
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	    }
-	    if(barf & 0x0008) {
-		printf("Vpp Low error.\n");
-		rc = ERR_PROG_ERROR;
-		goto outahere;
-	    }
-	    rc = ERR_PROG_ERROR;
-	    goto outahere;
+		if (*addr & 0x003A003A) {	/* check for error */
+			barf = *addr;
+			if (barf & 0x003A0000) {
+				barf >>= 16;
+			} else {
+				barf &= 0x0000003A;
+			}
+			printf ("\nFlash write error %02lx at address %08lx\n", barf, (unsigned long) dest);
+			if (barf & 0x0002) {
+				printf ("Block locked, not erased.\n");
+				rc = ERR_NOT_ERASED;
+				goto outahere;
+			}
+			if (barf & 0x0010) {
+				printf ("Programming error.\n");
+				rc = ERR_PROG_ERROR;
+				goto outahere;
+			}
+			if (barf & 0x0008) {
+				printf ("Vpp Low error.\n");
+				rc = ERR_PROG_ERROR;
+				goto outahere;
+			}
+			rc = ERR_PROG_ERROR;
+			goto outahere;
+		}
 	}
-    }
 
 
-outahere:
-    /* read array command */
-    *addr = 0x00FF00FF;
+      outahere:
+	/* read array command */
+	*addr = 0x00FF00FF;
 
-    if (flag)
-      enable_interrupts();
+	if (flag)
+		enable_interrupts ();
 
-    return rc;
+	return rc;
 }
 
 /*-----------------------------------------------------------------------
  * Copy memory to flash.
  */
 
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 {
-    ulong cp, wp, data;
-    int l;
-    int i, rc;
-
-    wp = (addr & ~3);	/* get lower word aligned address */
+	ulong cp, wp, data;
+	int l;
+	int i, rc;
+
+	wp = (addr & ~3);	/* get lower word aligned address */
+
+	/*
+	 * handle unaligned start bytes
+	 */
+	if ((l = addr - wp) != 0) {
+		data = 0;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 24);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data >> 8) | (*src++ << 24);
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data >> 8) | (*(uchar *) cp << 24);
+		}
 
-    /*
-     * handle unaligned start bytes
-     */
-    if ((l = addr - wp) != 0) {
-	data = 0;
-	for (i=0, cp=wp; i<l; ++i, ++cp) {
-	    data = (data >> 8) | (*(uchar *)cp << 24);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
 	}
-	for (; i<4 && cnt>0; ++i) {
-	    data = (data >> 8) | (*src++ << 24);
-	    --cnt;
-	    ++cp;
+
+	/*
+	 * handle word aligned part
+	 */
+	while (cnt >= 4) {
+		data = *((vu_long *) src);
+		if ((rc = write_word (info, wp, data)) != 0) {
+			return (rc);
+		}
+		src += 4;
+		wp += 4;
+		cnt -= 4;
 	}
-	for (; cnt==0 && i<4; ++i, ++cp) {
-	    data = (data >> 8) | (*(uchar *)cp << 24);
+
+	if (cnt == 0) {
+		return ERR_OK;
 	}
 
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
+	/*
+	 * handle unaligned tail bytes
+	 */
+	data = 0;
+	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
+		data = (data >> 8) | (*src++ << 24);
+		--cnt;
 	}
-	wp += 4;
-    }
-
-    /*
-     * handle word aligned part
-     */
-    while (cnt >= 4) {
-	data = *((vu_long*)src);
-	if ((rc = write_word(info, wp, data)) != 0) {
-	    return (rc);
+	for (; i < 4; ++i, ++cp) {
+		data = (data >> 8) | (*(uchar *) cp << 24);
 	}
-	src += 4;
-	wp  += 4;
-	cnt -= 4;
-    }
-
-    if (cnt == 0) {
-	return ERR_OK;
-    }
-
-    /*
-     * handle unaligned tail bytes
-     */
-    data = 0;
-    for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-	data = (data >> 8) | (*src++ << 24);
-	--cnt;
-    }
-    for (; i<4; ++i, ++cp) {
-	data = (data >> 8) | (*(uchar *)cp << 24);
-    }
-
-    return write_word(info, wp, data);
+
+	return write_word (info, wp, data);
 }