diff options
| author | Alifer Moraes <alifer.wsdm@gmail.com> | 2020-01-20 13:31:02 -0300 |
|---|---|---|
| committer | Stefano Babic <sbabic@denx.de> | 2020-02-09 15:05:10 +0100 |
| commit | 2f2fdbe3f482cab28bac27d18a1197bb9654e647 (patch) | |
| tree | 4e8bdb36094641abe05624d26b3d04b23c6b6d6a /board/freescale/mx6sabresd | |
| parent | 70a2df36fe3b2fd2ef82de4f244a43fc1ff879f6 (diff) | |
| download | u-boot-2f2fdbe3f482cab28bac27d18a1197bb9654e647.tar.gz u-boot-2f2fdbe3f482cab28bac27d18a1197bb9654e647.tar.xz u-boot-2f2fdbe3f482cab28bac27d18a1197bb9654e647.zip | |
mx6sabresd: Convert PCI to driver model
Convert imx6sabresd PCI to driver model to fix the following warning:
===================== WARNING ======================
This board does not use CONFIG_DM_PCI Please update
the board to use CONFIG_DM_PCI before the v2019.07 release.
Failure to update by the deadline may result in board removal.
See doc/driver-model/MIGRATION.txt for more info.
====================================================
After the conversion the following commands were used for testing:
=> pci enum
PCI: Failed autoconfig bar 10
PCI: Failed autoconfig bar 10
=> pci 1
Scanning PCI devices on bus 1
BusDevFun VendorId DeviceId Device Class Sub-Class
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Diffstat (limited to 'board/freescale/mx6sabresd')
| -rw-r--r-- | board/freescale/mx6sabresd/mx6sabresd.c | 11 |
1 files changed, 0 insertions, 11 deletions
diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c index b346ca4ced..4a208277ac 100644 --- a/board/freescale/mx6sabresd/mx6sabresd.c +++ b/board/freescale/mx6sabresd/mx6sabresd.c @@ -231,16 +231,6 @@ static void setup_spi(void) SETUP_IOMUX_PADS(ecspi1_pads); } -iomux_v3_cfg_t const pcie_pads[] = { - IOMUX_PADS(PAD_EIM_D19__GPIO3_IO19 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* POWER */ - IOMUX_PADS(PAD_GPIO_17__GPIO7_IO12 | MUX_PAD_CTRL(NO_PAD_CTRL)), /* RESET */ -}; - -static void setup_pcie(void) -{ - SETUP_IOMUX_PADS(pcie_pads); -} - iomux_v3_cfg_t const di0_pads[] = { IOMUX_PADS(PAD_DI0_DISP_CLK__IPU1_DI0_DISP_CLK), /* DISP0_CLK */ IOMUX_PADS(PAD_DI0_PIN2__IPU1_DI0_PIN02), /* DISP0_HSYNC */ @@ -508,7 +498,6 @@ int overwrite_console(void) int board_eth_init(bd_t *bis) { setup_iomux_enet(); - setup_pcie(); return cpu_eth_init(bis); } |