ColdFire: Add M5253DEMO platform support for MCF5253

Signed-off-by: TsiChung Liew <Tsi-Chung.Liew@freescale.com>

1 files changed, 140 insertions, 0 deletions

diff --git a/board/freescale/m5253demo/m5253demo.c b/board/freescale/m5253demo/m5253demo.c
new file mode 100644
index 0000000000..2eb6a0444f
--- /dev/null
+++ b/board/freescale/m5253demo/m5253demo.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2000-2003
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * Copyright (C) 2004-2007 Freescale Semiconductor, Inc.
+ * Hayden Fraser (Hayden.Fraser@freescale.com)
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/immap.h>
+
+int checkboard(void)
+{
+	puts("Board: ");
+	puts("Freescale MCF5253 DEMO\n");
+	return 0;
+};
+
+phys_size_t initdram(int board_type)
+{
+	u32 dramsize = 0;
+
+	/*
+	 * Check to see if the SDRAM has already been initialized
+	 * by a run control tool
+	 */
+	if (!(mbar_readLong(MCFSIM_DCR) & 0x8000)) {
+		u32 RC, temp;
+
+		RC = (CFG_CLK / 1000000) >> 1;
+		RC = (RC * 15) >> 4;
+
+		/* Initialize DRAM Control Register: DCR */
+		mbar_writeShort(MCFSIM_DCR, (0x8400 | RC));
+		__asm__("nop");
+
+		mbar_writeLong(MCFSIM_DACR0, 0x00003224);
+		__asm__("nop");
+
+		/* Initialize DMR0 */
+		dramsize = (CFG_SDRAM_SIZE << 20);
+		temp = (dramsize - 1) & 0xFFFC0000;
+		mbar_writeLong(MCFSIM_DMR0, temp | 1);
+		__asm__("nop");
+
+		mbar_writeLong(MCFSIM_DACR0, 0x0000322c);
+		__asm__("nop");
+
+		/* Write to this block to initiate precharge */
+		*(u32 *) (CFG_SDRAM_BASE) = 0xa5a5a5a5;
+		__asm__("nop");
+
+		/* Set RE bit in DACR */
+		mbar_writeLong(MCFSIM_DACR0,
+			       mbar_readLong(MCFSIM_DACR0) | 0x8000);
+		__asm__("nop");
+
+		/* Wait for at least 8 auto refresh cycles to occur */
+		udelay(500);
+
+		/* Finish the configuration by issuing the MRS */
+		mbar_writeLong(MCFSIM_DACR0,
+			       mbar_readLong(MCFSIM_DACR0) | 0x0040);
+		__asm__("nop");
+
+		*(u32 *) (CFG_SDRAM_BASE + 0x800) = 0xa5a5a5a5;
+	}
+
+	return dramsize;
+}
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("DRAM test not implemented!\n");
+
+	return (0);
+}
+
+#ifdef CONFIG_CMD_IDE
+#include <ata.h>
+int ide_preinit(void)
+{
+	return (0);
+}
+
+void ide_set_reset(int idereset)
+{
+	volatile atac_t *ata = (atac_t *) CFG_ATA_BASE_ADDR;
+	long period;
+	/*  t1,  t2,  t3,  t4,  t5,  t6,  t9, tRD,  tA */
+	int piotms[5][9] = { {70, 165, 60, 30, 50, 5, 20, 0, 35},	/* PIO 0 */
+	{50, 125, 45, 20, 35, 5, 15, 0, 35},	/* PIO 1 */
+	{30, 100, 30, 15, 20, 5, 10, 0, 35},	/* PIO 2 */
+	{30, 80, 30, 10, 20, 5, 10, 0, 35},	/* PIO 3 */
+	{25, 70, 20, 10, 20, 5, 10, 0, 35}	/* PIO 4 */
+	};
+
+	if (idereset) {
+		ata->cr = 0;	/* control reset */
+		udelay(100);
+	} else {
+		mbar2_writeLong(CIM_MISCCR, CIM_MISCCR_CPUEND);
+
+#define CALC_TIMING(t) (t + period - 1) / period
+		period = 1000000000 / (CFG_CLK / 2);	/* period in ns */
+
+		/*ata->ton = CALC_TIMING (180); */
+		ata->t1 = CALC_TIMING(piotms[2][0]);
+		ata->t2w = CALC_TIMING(piotms[2][1]);
+		ata->t2r = CALC_TIMING(piotms[2][1]);
+		ata->ta = CALC_TIMING(piotms[2][8]);
+		ata->trd = CALC_TIMING(piotms[2][7]);
+		ata->t4 = CALC_TIMING(piotms[2][3]);
+		ata->t9 = CALC_TIMING(piotms[2][6]);
+
+		ata->cr = 0x40;	/* IORDY enable */
+		udelay(2000);
+		ata->cr |= 0x01;	/* IORDY enable */
+	}
+}
+#endif				/* CONFIG_CMD_IDE */