* Add support for PPChameleon Eval Board

* Add support for P3G4 board

* Fix problem with MGT5100 FEC driver: add "early" MAC address
  initialization

4 files changed, 87 insertions, 13 deletions

diff --git a/board/evb64260/evb64260.c b/board/evb64260/evb64260.c
index 4f3032efec..99717beb0b 100644
--- a/board/evb64260/evb64260.c
+++ b/board/evb64260/evb64260.c
@@ -237,7 +237,7 @@ int board_pre_init (void)
 	 * on-board sram on the eval board, and updates the correct
 	 * registers to boot from the sram. (device0)
 	 */
-#ifdef CONFIG_ZUMA_V2
+#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	/* Zuma has no SRAM */
 	sram_boot = 0;
 #else
@@ -265,6 +265,7 @@ int board_pre_init (void)
 	GT_REG_WRITE(DEVICE_BANK2PARAMETERS, CFG_DEV2_PAR);
 #endif
 
+#ifdef CONFIG_EVB64260
 #ifdef CFG_32BIT_BOOT_PAR
 	/* detect if we are booting from the 32 bit flash */
 	if (GTREGREAD(DEVICE_BOOT_BANK_PARAMETERS) & (0x3 << 20)) {
@@ -280,6 +281,11 @@ int board_pre_init (void)
 	/* 8 bit boot flash only */
 	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_8BIT_BOOT_PAR);
 #endif
+#else /* CONFIG_EVB64260 not defined */
+		/* We are booting from 16-bit flash.
+		 */
+	GT_REG_WRITE(DEVICE_BOOT_BANK_PARAMETERS, CFG_16BIT_BOOT_PAR);
+#endif
 
 	gt_cpu_config();
 
@@ -351,7 +357,7 @@ checkboard (void)
 void
 debug_led(int led, int mode)
 {
-#ifndef CONFIG_ZUMA_V2
+#if !defined(CONFIG_ZUMA_V2) && !defined(CONFIG_P3G4)
 	volatile int *addr = NULL;
 	int dummy;
 
diff --git a/board/evb64260/flash.c b/board/evb64260/flash.c
index c89739333a..e6cf8eb6b3 100644
--- a/board/evb64260/flash.c
+++ b/board/evb64260/flash.c
@@ -54,6 +54,7 @@ flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
 static ulong flash_get_size (int portwidth, vu_long *addr, flash_info_t *info);
 static int write_word (flash_info_t *info, ulong dest, ulong data);
 static void flash_get_offsets (ulong base, flash_info_t *info);
+static flash_info_t *flash_get_info(ulong base);
 
 /*-----------------------------------------------------------------------
  */
@@ -72,7 +73,11 @@ flash_init (void)
 
 	/* the boot flash */
 	base = CFG_FLASH_BASE;
-	size_b0 = flash_get_size(1, (vu_long *)base, &flash_info[0]);
+#ifndef CFG_BOOT_FLASH_WIDTH
+#define CFG_BOOT_FLASH_WIDTH	1
+#endif
+	size_b0 = flash_get_size(CFG_BOOT_FLASH_WIDTH, (vu_long *)base,
+	                         &flash_info[0]);
 
 	printf("[%ldkB@%lx] ", size_b0/1024, base);
 
@@ -98,6 +103,22 @@ flash_init (void)
 	    base+=size;
 	}
 
+#if CFG_MONITOR_BASE >= CFG_FLASH_BASE
+	/* monitor protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+	              CFG_MONITOR_BASE,
+	              CFG_MONITOR_BASE + monitor_flash_len - 1,
+	              flash_get_info(CFG_MONITOR_BASE));
+#endif
+
+#ifdef  CFG_ENV_IS_IN_FLASH
+	/* ENV protection ON by default */
+	flash_protect(FLAG_PROTECT_SET,
+	              CFG_ENV_ADDR,
+	              CFG_ENV_ADDR + CFG_ENV_SIZE - 1,
+	              flash_get_info(CFG_ENV_ADDR));
+#endif
+
 	flash_size = size_b0 + size_b1;
 	return flash_size;
 }
@@ -148,6 +169,23 @@ flash_get_offsets (ulong base, flash_info_t *info)
 
 /*-----------------------------------------------------------------------
  */
+
+static flash_info_t *flash_get_info(ulong base)
+{
+	int i;
+	flash_info_t * info;
+
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
+		info = & flash_info[i];
+		if (info->start[0] <= base && base <= info->start[0] + info->size - 1)
+			break;
+	}
+
+	return i == CFG_MAX_FLASH_BANKS ? 0 : info;
+}
+
+/*-----------------------------------------------------------------------
+ */
 void
 flash_print_info  (flash_info_t *info)
 {
@@ -247,8 +285,11 @@ static inline void flash_cmd(int width, volatile unsigned char *addr, int offset
 	    /* 2x16 */
 	    unsigned long cmd32=(cmd<<16)|cmd;
 	    *(volatile unsigned long *)(addr+offset*2)=cmd32;
+	} else if (width == 2) {
+	    /* 1x16 */
+	    *(volatile unsigned short *)((unsigned short*)addr+offset)=cmd;
 	} else {
-	    /* 1x16 or 1x8 */
+	    /* 1x8 */
 	    *(volatile unsigned char *)(addr+offset)=cmd;
 	}
 }
diff --git a/board/evb64260/mpsc.c b/board/evb64260/mpsc.c
index 718fe0566e..ee623ca569 100644
--- a/board/evb64260/mpsc.c
+++ b/board/evb64260/mpsc.c
@@ -273,7 +273,7 @@ mpsc_init(int baud)
 
 	/* BRG CONFIG */
 	galbrg_set_baudrate(CHANNEL, baud);
-#ifdef CONFIG_ZUMA_V2
+#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	galbrg_set_clksrc(CHANNEL,0x8);	/* connect TCLK -> BRG */
 #else
 	galbrg_set_clksrc(CHANNEL,0);
@@ -387,7 +387,7 @@ galbrg_set_baudrate(int channel, int rate)
 
 	galbrg_disable(channel);
 
-#ifdef CONFIG_ZUMA_V2
+#if defined(CONFIG_ZUMA_V2) || defined(CONFIG_P3G4)
 	/* from tclk */
 	clock = (CFG_BUS_HZ/(16*rate)) - 1;
 #else
@@ -803,6 +803,7 @@ static int
 galmpsc_shutdown(int mpsc)
 {
 	DECLARE_GLOBAL_DATA_PTR;
+#if 0
 	unsigned int temp;
 
 	/* cause RX abort (clears RX) */
@@ -810,9 +811,11 @@ galmpsc_shutdown(int mpsc)
 	temp |= MPSC_RX_ABORT | MPSC_TX_ABORT;
 	temp &= ~MPSC_ENTER_HUNT;
 	GT_REG_WRITE_MIRROR(GALMPSC_CHANNELREG_2,mpsc,GALMPSC_REG_GAP,temp);
+#endif
 
-	GT_REG_WRITE(GALSDMA_0_COM_REG, 0);
-	GT_REG_WRITE(GALSDMA_0_COM_REG, SDMA_TX_ABORT | SDMA_RX_ABORT);
+	GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF, 0);
+	GT_REG_WRITE(GALSDMA_0_COM_REG + CHANNEL * GALSDMA_REG_DIFF,
+	             SDMA_TX_ABORT | SDMA_RX_ABORT);
 
 	/* shut down the MPSC */
 	GT_REG_WRITE(GALMPSC_MCONF_LOW, 0);
@@ -823,14 +826,15 @@ galmpsc_shutdown(int mpsc)
 
 	/* shut down the sdma engines. */
 	/* reset config to default */
-	GT_REG_WRITE(GALSDMA_0_CONF_REG, 0x000000fc);
+	GT_REG_WRITE(GALSDMA_0_CONF_REG + CHANNEL * GALSDMA_REG_DIFF,
+	             0x000000fc);
 
 	udelay(100);
 
 	/* clear the SDMA current and first TX and RX pointers */
-	GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR, 0);
-	GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR, 0);
-	GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR, 0);
+	GT_REG_WRITE(GALSDMA_0_CUR_RX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
+	GT_REG_WRITE(GALSDMA_0_CUR_TX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
+	GT_REG_WRITE(GALSDMA_0_FIR_TX_PTR + CHANNEL * GALSDMA_REG_DIFF, 0);
 
 	udelay(100);
 
diff --git a/board/evb64260/sdram_init.c b/board/evb64260/sdram_init.c
index 361656574b..d019d22652 100644
--- a/board/evb64260/sdram_init.c
+++ b/board/evb64260/sdram_init.c
@@ -175,7 +175,30 @@ check_dimm(uchar slot, sdram_info_t *info)
 	return 0;
 }
 
-#else /* ! CONFIG_ZUMA_V2 */
+#elif defined(CONFIG_P3G4)
+
+static int
+check_dimm(uchar slot, sdram_info_t *info)
+{
+	memset(info, 0, sizeof(*info));
+
+	if (slot)
+		return 0;
+
+	info->slot = slot;
+	info->banks = 1;
+	info->registered = 0;
+	info->drb_size = 4;
+	info->tpar = 3;
+	info->tras_clocks = 6;
+	info->burst_len = 4;
+#ifdef CONFIG_ECC
+	info->ecc = 2;
+#endif
+	return 0;
+}
+
+#else /* ! CONFIG_ZUMA_V2 && ! CONFIG_P3G4*/
 
 /* This code reads the SPD chip on the sdram and populates
  * the array which is passed in with the relevant information */