ppc4xx: remove OCRTC board

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd.eu>

1 files changed, 0 insertions, 78 deletions

diff --git a/board/esd/ocrtc/ocrtc.c b/board/esd/ocrtc/ocrtc.c
deleted file mode 100644
index b81596135b..0000000000
--- a/board/esd/ocrtc/ocrtc.c
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * (C) Copyright 2001
- * Stefan Roese, esd gmbh germany, stefan.roese@esd-electronics.com
- *
- * SPDX-License-Identifier:	GPL-2.0+
- */
-
-#include <common.h>
-#include "ocrtc.h"
-#include <asm/processor.h>
-#include <i2c.h>
-#include <command.h>
-
-
-extern void lxt971_no_sleep(void);
-
-
-int board_early_init_f (void)
-{
-	/*
-	 * IRQ 0-15  405GP internally generated; active high; level sensitive
-	 * IRQ 16    405GP internally generated; active low; level sensitive
-	 * IRQ 17-24 RESERVED
-	 * IRQ 25 (EXT IRQ 0) CAN0; active low; level sensitive
-	 * IRQ 26 (EXT IRQ 1) CAN1; active low; level sensitive
-	 * IRQ 27 (EXT IRQ 2) PCI SLOT 0; active low; level sensitive
-	 * IRQ 28 (EXT IRQ 3) PCI SLOT 1; active low; level sensitive
-	 * IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-	 * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
-	 * IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
-	 */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (UIC0ER, 0x00000000);	/* disable all ints */
-	mtdcr (UIC0CR, 0x00000000);	/* set all to be non-critical */
-	mtdcr (UIC0PR, 0xFFFFFF81);	/* set int polarities */
-	mtdcr (UIC0TR, 0x10000000);	/* set int trigger levels */
-	mtdcr (UIC0VCR, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (UIC0SR, 0xFFFFFFFF);	/* clear all ints */
-
-	/*
-	 * EBC Configuration Register: clear EBTC -> high-Z ebc signals between
-	 * transfers, set device-paced timeout to 256 cycles
-	 */
-	mtebc (EBC0_CFG, 0x20400000);
-
-	return 0;
-}
-
-/*
- * Check Board Identity:
- */
-int checkboard (void)
-{
-	char str[64];
-	int i = getenv_f("serial#", str, sizeof (str));
-
-	puts ("Board: ");
-
-	if (i == -1) {
-#ifdef CONFIG_OCRTC
-		puts ("### No HW ID - assuming OCRTC");
-#endif
-#ifdef CONFIG_ORSG
-		puts ("### No HW ID - assuming ORSG");
-#endif
-	} else {
-		puts (str);
-	}
-
-	putc ('\n');
-
-	/*
-	 * Disable sleep mode in LXT971
-	 */
-	lxt971_no_sleep();
-
-	return (0);
-}