diff options
| author | Simon Glass <sjg@chromium.org> | 2017-05-12 21:09:49 -0600 |
|---|---|---|
| committer | Heiko Schocher <hs@denx.de> | 2017-05-15 06:17:09 +0200 |
| commit | eb5ba3aefdf0f6cbd61684eeb61428f11fa7613c (patch) | |
| tree | 89887dacbe56dc1b3cef048ce08c2ec3ef8f955b /board/cm5200/cmd_cm5200.c | |
| parent | 22f3368e71321db1e0e15dfbf54b052367890ec7 (diff) | |
| download | u-boot-eb5ba3aefdf0f6cbd61684eeb61428f11fa7613c.tar.gz u-boot-eb5ba3aefdf0f6cbd61684eeb61428f11fa7613c.tar.xz u-boot-eb5ba3aefdf0f6cbd61684eeb61428f11fa7613c.zip | |
i2c: Drop use of CONFIG_I2C_HARD
This option is pretty old. It predates CONFIG_SYS_I2C which is itself
deprecated in favour of driver model. Disable it for all boards.
Also drop I2C options which depend on this.
Signed-off-by: Simon Glass <sjg@chromium.org>
Diffstat (limited to 'board/cm5200/cmd_cm5200.c')
| -rw-r--r-- | board/cm5200/cmd_cm5200.c | 32 |
1 files changed, 1 insertions, 31 deletions
diff --git a/board/cm5200/cmd_cm5200.c b/board/cm5200/cmd_cm5200.c index 9c40ad7b2a..60097dc8c7 100644 --- a/board/cm5200/cmd_cm5200.c +++ b/board/cm5200/cmd_cm5200.c @@ -13,34 +13,6 @@ #ifdef CONFIG_CMD_BSP -static int do_i2c_test(char * const argv[]) -{ - unsigned char temp, temp1; - - printf("Starting I2C Test\n" - "Please set Jumper:\nI2C SDA 2-3\nI2C SCL 2-3\n\n" - "Please press any key to start\n\n"); - getc(); - - temp = 0xf0; /* set io 0-4 as output */ - i2c_write(CONFIG_SYS_I2C_IO, 3, 1, (uchar *)&temp, 1); - - printf("Press I2C4-7. LED I2C0-3 should have the same state\n\n" - "Press any key to stop\n\n"); - - while (!tstc()) { - i2c_read(CONFIG_SYS_I2C_IO, 0, 1, (uchar *)&temp, 1); - temp1 = (temp >> 4) & 0x03; - temp1 |= (temp >> 3) & 0x08; /* S302 -> LED303 */ - temp1 |= (temp >> 5) & 0x04; /* S303 -> LED302 */ - temp = temp1; - i2c_write(CONFIG_SYS_I2C_IO, 1, 1, (uchar *)&temp, 1); - } - getc(); - - return 0; -} - static int do_usb_test(char * const argv[]) { int i; @@ -387,9 +359,7 @@ static int cmd_fkt(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) switch (argc) { case 2: - if (strncmp(argv[1], "i2c", 3) == 0) - rcode = do_i2c_test(argv); - else if (strncmp(argv[1], "led", 3) == 0) + if (strncmp(argv[1], "led", 3) == 0) rcode = do_led_test(argv); else if (strncmp(argv[1], "usb", 3) == 0) rcode = do_usb_test(argv); |