diff options
author | Michael Schwingen <michael@schwingen.org> | 2008-01-16 19:50:37 +0100 |
---|---|---|
committer | Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> | 2008-01-18 01:00:02 +0100 |
commit | ea99e8f05b7240fd657739e286664664ae160abe (patch) | |
tree | f659f1c1eb450a020df30a84191f63a2b8e61009 /board/actux1 | |
parent | 3d9f3bfb7a33efe8e41e01b025563cd712c57d64 (diff) | |
download | u-boot-ea99e8f05b7240fd657739e286664664ae160abe.tar.gz u-boot-ea99e8f05b7240fd657739e286664664ae160abe.tar.xz u-boot-ea99e8f05b7240fd657739e286664664ae160abe.zip |
add AcTux-1 board support
Signed-off-by: Michael Schwingen <michael@schwingen.org>
Diffstat (limited to 'board/actux1')
-rw-r--r-- | board/actux1/Makefile | 50 | ||||
-rw-r--r-- | board/actux1/actux1.c | 161 | ||||
-rw-r--r-- | board/actux1/actux1_hw.h | 57 | ||||
-rw-r--r-- | board/actux1/config.mk | 4 | ||||
-rw-r--r-- | board/actux1/u-boot.lds | 69 |
5 files changed, 341 insertions, 0 deletions
diff --git a/board/actux1/Makefile b/board/actux1/Makefile new file mode 100644 index 0000000000..83611e7c03 --- /dev/null +++ b/board/actux1/Makefile @@ -0,0 +1,50 @@ +# +# (C) Copyright 2000-2006 +# Wolfgang Denk, DENX Software Engineering, wd@denx.de. +# +# See file CREDITS for list of people who contributed to this +# project. +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU General Public License as +# published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place, Suite 330, Boston, +# MA 02111-1307 USA +# + +include $(TOPDIR)/config.mk + +LIB = $(obj)lib$(BOARD).a + +COBJS := actux1.o + +SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) +OBJS := $(addprefix $(obj),$(COBJS)) +SOBJS := $(addprefix $(obj),$(SOBJS)) + +$(LIB): $(obj).depend $(OBJS) + $(AR) $(ARFLAGS) $@ $(OBJS) + +clean: + rm -f $(SOBJS) $(OBJS) + +distclean: clean + rm -f $(LIB) core *.bak .depend + +######################################################################### + +# defines $(obj).depend target +include $(SRCTREE)/rules.mk + +sinclude $(obj).depend + +######################################################################### diff --git a/board/actux1/actux1.c b/board/actux1/actux1.c new file mode 100644 index 0000000000..b555fdbd6c --- /dev/null +++ b/board/actux1/actux1.c @@ -0,0 +1,161 @@ +/* + * (C) Copyright 2007 + * Michael Schwingen, michael@schwingen.org + * + * (C) Copyright 2006 + * Stefan Roese, DENX Software Engineering, sr@denx.de. + * + * (C) Copyright 2002 + * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net + * + * (C) Copyright 2002 + * Sysgo Real-Time Solutions, GmbH <www.elinos.com> + * Marius Groeger <mgroeger@sysgo.de> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include <common.h> +#include <command.h> +#include <malloc.h> +#include <asm/arch/ixp425.h> +#include <asm/io.h> +#include <miiphy.h> + +#include "actux1_hw.h" + +DECLARE_GLOBAL_DATA_PTR; + +int board_init (void) +{ + gd->bd->bi_arch_number = MACH_TYPE_ACTUX1; + + /* adress of boot parameters */ + gd->bd->bi_boot_params = 0x00000100; + + GPIO_OUTPUT_CLEAR (CFG_GPIO_IORST); + GPIO_OUTPUT_ENABLE (CFG_GPIO_IORST); + + /* Setup GPIO's for PCI INTA */ + GPIO_OUTPUT_DISABLE (CFG_GPIO_PCI1_INTA); + GPIO_INT_ACT_LOW_SET (CFG_GPIO_PCI1_INTA); + + /* Setup GPIO's for 33MHz clock output */ + GPIO_OUTPUT_ENABLE (CFG_GPIO_PCI_CLK); + GPIO_OUTPUT_ENABLE (CFG_GPIO_EXTBUS_CLK); + *IXP425_GPIO_GPCLKR = 0x011001FF; + + /* CS5: Debug port */ + *IXP425_EXP_CS5 = 0x9d520003; + /* CS6: HwRel */ + *IXP425_EXP_CS6 = 0x81860001; + /* CS7: LEDs */ + *IXP425_EXP_CS7 = 0x80900003; + + udelay (533); + GPIO_OUTPUT_SET (CFG_GPIO_IORST); + + ACTUX1_LED1 (2); + ACTUX1_LED2 (2); + ACTUX1_LED3 (0); + ACTUX1_LED4 (0); + ACTUX1_LED5 (0); + ACTUX1_LED6 (0); + ACTUX1_LED7 (0); + + ACTUX1_HS (ACTUX1_HS_DCD); + + return 0; +} + +/* + * Check Board Identity + */ +int checkboard (void) +{ + char revision; + char *s = getenv ("serial#"); + + puts ("Board: AcTux-1 rev."); + putc (ACTUX1_BOARDREL + 'A' - 1); + + if (s != NULL) { + puts (", serial# "); + puts (s); + } + putc ('\n'); + + return (0); +} + +/************************************************************************* + * get_board_rev() - setup to pass kernel board revision information + * 0 = reserved + * 1 = Rev. A + * 2 = Rev. B + *************************************************************************/ +u32 get_board_rev (void) +{ + return ACTUX1_BOARDREL; +} + +int dram_init (void) +{ + gd->bd->bi_dram[0].start = PHYS_SDRAM_1; + gd->bd->bi_dram[0].size = PHYS_SDRAM_1_SIZE; + + return (0); +} + +#if defined(CONFIG_CMD_PCI) || defined(CONFIG_PCI) +extern struct pci_controller hose; +extern void pci_ixp_init (struct pci_controller *hose); + +void pci_init_board (void) +{ + extern void pci_ixp_init (struct pci_controller *hose); + pci_ixp_init (&hose); +} +#endif + +void reset_phy (void) +{ + u16 id1, id2; + + /* initialize the PHY */ + miiphy_reset ("NPE0", CONFIG_PHY_ADDR); + + miiphy_read ("NPE0", CONFIG_PHY_ADDR, PHY_PHYIDR1, &id1); + miiphy_read ("NPE0", CONFIG_PHY_ADDR, PHY_PHYIDR2, &id2); + + id2 &= 0xFFF0; /* mask out revision bits */ + + if (id1 == 0x13 && id2 == 0x78e0) { + /* + * LXT971/LXT972 PHY: set LED outputs: + * LED1(green) = Link/ACT, + * LED2 (unused) = LINK, + * LED3(red) = Coll + */ + miiphy_write ("NPE0", CONFIG_PHY_ADDR, 20, 0xD432); + } else if (id1 == 0x143 && id2 == 0xbc30) { + /* BCM5241: default values are OK */ + } else + printf ("unknown ethernet PHY ID: %x %x\n", id1, id2); +} diff --git a/board/actux1/actux1_hw.h b/board/actux1/actux1_hw.h new file mode 100644 index 0000000000..bb3b7f953b --- /dev/null +++ b/board/actux1/actux1_hw.h @@ -0,0 +1,57 @@ +/* + * (C) Copyright 2007 + * Michael Schwingen, michael@schwingen.org + * + * hardware register definitions for the AcTux-1 board. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _ACTUX1_HW_H +#define _ACTUX1_HW_H + +/* 0 = LED off,1 = green, 2 = red, 3 = orange */ +#define ACTUX1_LED1(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 0) +#define ACTUX1_LED2(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 1) +#define ACTUX1_LED3(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 2) +#define ACTUX1_LED4(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 3) +#define ACTUX1_LED5(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 4) +#define ACTUX1_LED6(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 5) +#define ACTUX1_LED7(a) writeb((a)^3, IXP425_EXP_BUS_CS7_BASE_PHYS + 6) +#define ACTUX1_HS(a) writeb((a), IXP425_EXP_BUS_CS7_BASE_PHYS + 7) +#define ACTUX1_HS_DCD 0x01 +#define ACTUX1_HS_DSR 0x02 + +#define ACTUX1_DBG_PORT IXP425_EXP_BUS_CS5_BASE_PHYS +#define ACTUX1_BOARDREL (readb(IXP425_EXP_BUS_CS6_BASE_PHYS) & 0x0F) + +/* GPIO settings */ +#define CFG_GPIO_PCI1_INTA 2 +#define CFG_GPIO_PCI2_INTA 3 +#define CFG_GPIO_I2C_SDA 4 +#define CFG_GPIO_I2C_SCL 5 +#define CFG_GPIO_DBGJUMPER 9 +#define CFG_GPIO_BUTTON1 10 +#define CFG_GPIO_DBGSENSE 11 +#define CFG_GPIO_DTR 12 +#define CFG_GPIO_IORST 13 /* Out */ +#define CFG_GPIO_PCI_CLK 14 /* Out */ +#define CFG_GPIO_EXTBUS_CLK 15 /* Out */ + +#endif diff --git a/board/actux1/config.mk b/board/actux1/config.mk new file mode 100644 index 0000000000..9a634cdffa --- /dev/null +++ b/board/actux1/config.mk @@ -0,0 +1,4 @@ +TEXT_BASE = 0x00e00000 + +# include NPE ethernet driver +BOARDLIBS = cpu/ixp/npe/libnpe.a diff --git a/board/actux1/u-boot.lds b/board/actux1/u-boot.lds new file mode 100644 index 0000000000..0de78d32a9 --- /dev/null +++ b/board/actux1/u-boot.lds @@ -0,0 +1,69 @@ +/* + * (C) Copyright 2000 + * Wolfgang Denk, DENX Software Engineering, wd@denx.de. + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +OUTPUT_FORMAT ("elf32-bigarm", "elf32-bigarm", "elf32-bigarm") +OUTPUT_ARCH (arm) +ENTRY (_start) +SECTIONS +{ + . = 0x00000000; + + . = ALIGN (4); + .text : { + cpu/ixp/start.o(.text) + lib_generic/string.o(.text) + lib_generic/vsprintf.o(.text) + lib_arm/board.o(.text) + common/dlmalloc.o(.text) + cpu/ixp/cpu.o(.text) + . = env_offset; + common/environment.o(.ppcenv) + * (.text) + } + + . = ALIGN (4); + .rodata : { + *(.rodata) + } + . = ALIGN (4); + .data : { + *(.data) + } + . = ALIGN (4); + .got : { + *(.got) + } + . =.; + __u_boot_cmd_start =.; + .u_boot_cmd : { + *(.u_boot_cmd) + } + __u_boot_cmd_end =.; + + . = ALIGN (4); + __bss_start =.; + .bss (NOLOAD): { + *(.bss) + } + _end =.; +} |