diff options
| author | Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com> | 2014-09-03 23:32:33 +0200 |
|---|---|---|
| committer | Albert ARIBAUD <albert.u.boot@aribaud.net> | 2014-09-11 18:04:34 +0200 |
| commit | 58f9e1ae6391a1fbb7ca024ae45e288aabb88807 (patch) | |
| tree | 2bf901b5312f6c63977adc91d59ed83dc6b60ead /arch | |
| parent | 5bfdcebf73f843b4a0968e87cff9ad6546358c8d (diff) | |
| download | u-boot-58f9e1ae6391a1fbb7ca024ae45e288aabb88807.tar.gz u-boot-58f9e1ae6391a1fbb7ca024ae45e288aabb88807.tar.xz u-boot-58f9e1ae6391a1fbb7ca024ae45e288aabb88807.zip | |
arm: Make reset position-independent
Some boards, like mx31pdk and tx25, require the beginning of the SPL
code to be position-independent. For these two boards, this is because
they use the i.MX external NAND boot, which starts by executing the
first NAND Flash page from the NFC page buffer. The SPL then needs to
copy itself to its actual link address in order to free the NFC page
buffer and use it to load the non-SPL image from Flash before running
it. This means that the SPL runtime address differs from its link
address between the reset and the initial copy performed by
board_init_f(), so this part of the SPL binary must be
position-independent.
This requirement was broken by commit 41623c9 'arm: move exception
handling out of start.S files', which used an absolute address to branch
to the reset routine. This new commit restores the original behavior,
which just performed a relative branch. This fixes the boot of mx31pdk
and tx25.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Reported-by: Helmut Raiger <helmut.raiger@hale.at>
Cc: Albert Aribaud <albert.u.boot@aribaud.net>
Cc: Magnus Lilja <lilja.magnus@gmail.com>
Cc: John Rigby <jcrigby@gmail.com>
Tested-by: Magnus Lilja <lilja.magnus@gmail.com>
Diffstat (limited to 'arch')
| -rw-r--r-- | arch/arm/lib/vectors.S | 3 |
1 files changed, 1 insertions, 2 deletions
diff --git a/arch/arm/lib/vectors.S b/arch/arm/lib/vectors.S index 493f3373f3..843b18f920 100644 --- a/arch/arm/lib/vectors.S +++ b/arch/arm/lib/vectors.S @@ -50,7 +50,7 @@ #endif _start: - ldr pc, _reset + b reset ldr pc, _undefined_instruction ldr pc, _software_interrupt ldr pc, _prefetch_abort @@ -77,7 +77,6 @@ _start: .globl _irq .globl _fiq -_reset: .word reset _undefined_instruction: .word undefined_instruction _software_interrupt: .word software_interrupt _prefetch_abort: .word prefetch_abort |