ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

Signed-off-by: Peter Tyser <ptyser@xes-inc.com>

1 files changed, 177 insertions, 0 deletions

diff --git a/arch/ppc/cpu/ppc4xx/fdt.c b/arch/ppc/cpu/ppc4xx/fdt.c
new file mode 100644
index 0000000000..15a184b5c6
--- /dev/null
+++ b/arch/ppc/cpu/ppc4xx/fdt.c
@@ -0,0 +1,177 @@
+/*
+ * (C) Copyright 2007-2008
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <watchdog.h>
+#include <command.h>
+#include <asm/cache.h>
+#include <ppc4xx.h>
+
+#if defined(CONFIG_OF_LIBFDT) && defined(CONFIG_OF_BOARD_SETUP)
+#include <libfdt.h>
+#include <libfdt_env.h>
+#include <fdt_support.h>
+#include <asm/4xx_pcie.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void __ft_board_setup(void *blob, bd_t *bd)
+{
+	int rc;
+	int i;
+	u32 bxcr;
+	u32 ranges[EBC_NUM_BANKS * 4];
+	u32 *p = ranges;
+	char ebc_path[] = "/plb/opb/ebc";
+
+	ft_cpu_setup(blob, bd);
+
+	/*
+	 * Read 4xx EBC bus bridge registers to get mappings of the
+	 * peripheral banks into the OPB/PLB address space
+	 */
+	for (i = 0; i < EBC_NUM_BANKS; i++) {
+		mtdcr(EBC0_CFGADDR, EBC_BXCR(i));
+		bxcr = mfdcr(EBC0_CFGDATA);
+
+		if ((bxcr & EBC_BXCR_BU_MASK) != EBC_BXCR_BU_NONE) {
+			*p++ = i;
+			*p++ = 0;
+			*p++ = bxcr & EBC_BXCR_BAS_MASK;
+			*p++ = EBC_BXCR_BANK_SIZE(bxcr);
+
+#ifdef CONFIG_FDT_FIXUP_NOR_FLASH_SIZE
+			/* Try to update reg property in nor flash node too */
+			fdt_fixup_nor_flash_size(blob, i,
+						 EBC_BXCR_BANK_SIZE(bxcr));
+#endif
+		}
+	}
+
+	/* Some 405 PPC's have EBC as direct PLB child in the dts */
+	if (fdt_path_offset(blob, ebc_path) < 0)
+		strcpy(ebc_path, "/plb/ebc");
+	rc = fdt_find_and_setprop(blob, ebc_path, "ranges", ranges,
+				  (p - ranges) * sizeof(u32), 1);
+	if (rc) {
+		printf("Unable to update property EBC mappings, err=%s\n",
+		       fdt_strerror(rc));
+	}
+}
+void ft_board_setup(void *blob, bd_t *bd) __attribute__((weak, alias("__ft_board_setup")));
+
+/*
+ * Fixup all PCIe nodes by setting the device_type property
+ * to "pci-endpoint" instead is "pci" for endpoint ports.
+ * This property will get checked later by the Linux driver
+ * to properly configure the PCIe port in Linux (again).
+ */
+void fdt_pcie_setup(void *blob)
+{
+	const char *compat = "ibm,plb-pciex";
+	const char *prop = "device_type";
+	const char *prop_val = "pci-endpoint";
+	const u32 *port;
+	int no;
+	int rc;
+
+	/* Search first PCIe node */
+	no = fdt_node_offset_by_compatible(blob, -1, compat);
+	while (no != -FDT_ERR_NOTFOUND) {
+		port = fdt_getprop(blob, no, "port", NULL);
+		if (port == NULL) {
+			printf("WARNING: could not find port property\n");
+		} else {
+			if (is_end_point(*port)) {
+				rc = fdt_setprop(blob, no, prop, prop_val,
+						 strlen(prop_val) + 1);
+				if (rc < 0)
+					printf("WARNING: could not set %s for %s: %s.\n",
+					       prop, compat, fdt_strerror(rc));
+			}
+		}
+
+		/* Jump to next PCIe node */
+		no = fdt_node_offset_by_compatible(blob, no, compat);
+	}
+}
+
+void ft_cpu_setup(void *blob, bd_t *bd)
+{
+	sys_info_t sys_info;
+	int off, ndepth = 0;
+
+	get_sys_info(&sys_info);
+
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "timebase-frequency",
+			     bd->bi_intfreq, 1);
+	do_fixup_by_prop_u32(blob, "device_type", "cpu", 4, "clock-frequency",
+			     bd->bi_intfreq, 1);
+	do_fixup_by_path_u32(blob, "/plb", "clock-frequency", sys_info.freqPLB, 1);
+	do_fixup_by_path_u32(blob, "/plb/opb", "clock-frequency", sys_info.freqOPB, 1);
+
+	if (fdt_path_offset(blob, "/plb/opb/ebc") >= 0)
+		do_fixup_by_path_u32(blob, "/plb/opb/ebc", "clock-frequency",
+			sys_info.freqEBC, 1);
+	else
+		do_fixup_by_path_u32(blob, "/plb/ebc", "clock-frequency",
+			sys_info.freqEBC, 1);
+
+	fdt_fixup_memory(blob, (u64)bd->bi_memstart, (u64)bd->bi_memsize);
+
+	/*
+	 * Fixup all UART clocks for CPU internal UARTs
+	 * (only these UARTs are definitely clocked by gd->uart_clk)
+	 *
+	 * These UARTs are direct childs of /plb/opb. This code
+	 * does not touch any UARTs that are connected to the ebc.
+	 */
+	off = fdt_path_offset(blob, "/plb/opb");
+	while ((off = fdt_next_node(blob, off, &ndepth)) >= 0) {
+		/*
+		 * process all sub nodes and stop when we are back
+		 * at the starting depth
+		 */
+		if (ndepth <= 0)
+			break;
+
+		/* only update direct childs */
+		if ((ndepth == 1) &&
+		    (fdt_node_check_compatible(blob, off, "ns16550") == 0))
+			fdt_setprop(blob, off,
+				    "clock-frequency",
+				    (void*)&(gd->uart_clk), 4);
+	}
+
+	/*
+	 * Fixup all ethernet nodes
+	 * Note: aliases in the dts are required for this
+	 */
+	fdt_fixup_ethernet(blob);
+
+	/*
+	 * Fixup all available PCIe nodes by setting the device_type property
+	 */
+	fdt_pcie_setup(blob);
+}
+#endif /* CONFIG_OF_LIBFDT && CONFIG_OF_BOARD_SETUP */