arm: socfpga: Restructure the SPL file

Restructure the SPL so each devices such as CV, A10 and S10
will have their own dedicated SPL file. SPL file determine
the HW initialization flow which is device specific

Signed-off-by: Chin Liang See <chin.liang.see@intel.com>
Signed-off-by: Ley Foon Tan <ley.foon.tan@intel.com>

1 files changed, 105 insertions, 0 deletions

diff --git a/arch/arm/mach-socfpga/spl_a10.c b/arch/arm/mach-socfpga/spl_a10.c
new file mode 100644
index 0000000000..e6fc766fca
--- /dev/null
+++ b/arch/arm/mach-socfpga/spl_a10.c
@@ -0,0 +1,105 @@
+/*
+ *  Copyright (C) 2012 Altera Corporation <www.altera.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/io.h>
+#include <asm/pl310.h>
+#include <asm/u-boot.h>
+#include <asm/utils.h>
+#include <image.h>
+#include <asm/arch/reset_manager.h>
+#include <spl.h>
+#include <asm/arch/system_manager.h>
+#include <asm/arch/freeze_controller.h>
+#include <asm/arch/clock_manager.h>
+#include <asm/arch/scan_manager.h>
+#include <asm/arch/sdram.h>
+#include <asm/arch/scu.h>
+#include <asm/arch/nic301.h>
+#include <asm/sections.h>
+#include <fdtdec.h>
+#include <watchdog.h>
+#include <asm/arch/pinmux.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static const struct socfpga_system_manager *sysmgr_regs =
+	(struct socfpga_system_manager *)SOCFPGA_SYSMGR_ADDRESS;
+
+u32 spl_boot_device(void)
+{
+	const u32 bsel = readl(&sysmgr_regs->bootinfo);
+
+	switch (SYSMGR_GET_BOOTINFO_BSEL(bsel)) {
+	case 0x1:	/* FPGA (HPS2FPGA Bridge) */
+		return BOOT_DEVICE_RAM;
+	case 0x2:	/* NAND Flash (1.8V) */
+	case 0x3:	/* NAND Flash (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(NAND), 0);
+		return BOOT_DEVICE_NAND;
+	case 0x4:	/* SD/MMC External Transceiver (1.8V) */
+	case 0x5:	/* SD/MMC Internal Transceiver (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(SDMMC), 0);
+		socfpga_per_reset(SOCFPGA_RESET(DMA), 0);
+		return BOOT_DEVICE_MMC1;
+	case 0x6:	/* QSPI Flash (1.8V) */
+	case 0x7:	/* QSPI Flash (3.0V) */
+		socfpga_per_reset(SOCFPGA_RESET(QSPI), 0);
+		return BOOT_DEVICE_SPI;
+	default:
+		printf("Invalid boot device (bsel=%08x)!\n", bsel);
+		hang();
+	}
+}
+
+#ifdef CONFIG_SPL_MMC_SUPPORT
+u32 spl_boot_mode(const u32 boot_device)
+{
+#if defined(CONFIG_SPL_FAT_SUPPORT) || defined(CONFIG_SPL_EXT_SUPPORT)
+	return MMCSD_MODE_FS;
+#else
+	return MMCSD_MODE_RAW;
+#endif
+}
+#endif
+
+void spl_board_init(void)
+{
+	/* configuring the clock based on handoff */
+	cm_basic_init(gd->fdt_blob);
+	WATCHDOG_RESET();
+
+	config_dedicated_pins(gd->fdt_blob);
+	WATCHDOG_RESET();
+
+	/* Release UART from reset */
+	socfpga_reset_uart(0);
+
+	/* enable console uart printing */
+	preloader_console_init();
+}
+
+void board_init_f(ulong dummy)
+{
+	/*
+	 * Configure Clock Manager to use intosc clock instead external osc to
+	 * ensure success watchdog operation. We do it as early as possible.
+	 */
+	cm_use_intosc();
+
+	socfpga_watchdog_disable();
+
+	arch_early_init_r();
+
+#ifdef CONFIG_HW_WATCHDOG
+	/* release osc1 watchdog timer 0 from reset */
+	socfpga_reset_deassert_osc1wd0();
+
+	/* reconfigure and enable the watchdog */
+	hw_watchdog_init();
+	WATCHDOG_RESET();
+#endif /* CONFIG_HW_WATCHDOG */
+}