dts: imx6ul_evk: Add DTS files for 14x14 EVK and 9x9 EVK boards

Add the board DTS files for 14x14 EVK and 9x9 EVK. They are necessary
for converting to use u-boot DM driver.

Two -u-boot.dtsi are added to modify compatible string of SPI flash
device to "spi-flash".

Signed-off-by: Ye Li <ye.li@nxp.com>

1 files changed, 427 insertions, 0 deletions

diff --git a/arch/arm/dts/imx6ul-14x14-evk.dts b/arch/arm/dts/imx6ul-14x14-evk.dts
new file mode 100644
index 0000000000..a642d77654
--- /dev/null
+++ b/arch/arm/dts/imx6ul-14x14-evk.dts
@@ -0,0 +1,427 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Copyright (C) 2015 Freescale Semiconductor, Inc.
+ * Copyright 2017-2018 NXP
+ */
+
+/dts-v1/;
+
+#include "imx6ul.dtsi"
+
+/ {
+	model = "Freescale i.MX6 UltraLite 14x14 EVK Board";
+	compatible = "fsl,imx6ul-14x14-evk", "fsl,imx6ul";
+
+	aliases {
+		spi5 = &soft_spi;
+	};
+
+	chosen {
+		stdout-path = &uart1;
+	};
+
+	memory {
+		reg = <0x80000000 0x20000000>;
+	};
+
+	regulators {
+		compatible = "simple-bus";
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		reg_sd1_vmmc: regulator@1 {
+			compatible = "regulator-fixed";
+			regulator-name = "VSD_3V3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>;
+			off-on-delay = <20000>;
+			enable-active-high;
+		};
+
+		reg_can_3v3: regulator@0 {
+			compatible = "regulator-fixed";
+			reg = <0>;
+			regulator-name = "can-3v3";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			gpios = <&gpio_spi 3 GPIO_ACTIVE_LOW>;
+		};
+
+		reg_gpio_dvfs: regulator-gpio {
+			compatible = "regulator-gpio";
+			pinctrl-names = "default";
+			pinctrl-0 = <&pinctrl_dvfs>;
+			regulator-min-microvolt = <1300000>;
+			regulator-max-microvolt = <1400000>;
+			regulator-name = "gpio_dvfs";
+			regulator-type = "voltage";
+			gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+			states = <1300000 0x1 1400000 0x0>;
+		};
+	};
+
+	soft_spi: soft-spi {
+		compatible = "spi-gpio";
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_spi4>;
+		pinctrl-assert-gpios = <&gpio5 8 GPIO_ACTIVE_LOW>;
+		status = "okay";
+		gpio-sck = <&gpio5 11 0>;
+		gpio-mosi = <&gpio5 10 0>;
+		cs-gpios = <&gpio5 7 0>;
+		num-chipselects = <1>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		gpio_spi: gpio_spi@0 {
+			compatible = "fairchild,74hc595";
+			gpio-controller;
+			#gpio-cells = <2>;
+			reg = <0>;
+			registers-number = <1>;
+			registers-default = /bits/ 8 <0x57>;
+			spi-max-frequency = <100000>;
+		};
+	};
+};
+
+&fec1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet1>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy0>;
+	status = "okay";
+};
+
+&fec2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_enet2>;
+	phy-mode = "rmii";
+	phy-handle = <&ethphy1>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		ethphy0: ethernet-phy@2 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <2>;
+		};
+
+		ethphy1: ethernet-phy@1 {
+			compatible = "ethernet-phy-ieee802.3-c22";
+			reg = <1>;
+		};
+	};
+};
+
+&i2c1 {
+	clock-frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c1>;
+	pinctrl-1 = <&pinctrl_i2c1_gpio>;
+	scl-gpios = <&gpio1 28 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+
+	mag3110@0e {
+		compatible = "fsl,mag3110";
+		reg = <0x0e>;
+		position = <2>;
+	};
+
+	fxls8471@1e {
+		compatible = "fsl,fxls8471";
+		reg = <0x1e>;
+		position = <0>;
+		interrupt-parent = <&gpio5>;
+		interrupts = <0 8>;
+	};
+};
+
+&i2c2 {
+	clock_frequency = <100000>;
+	pinctrl-names = "default", "gpio";
+	pinctrl-0 = <&pinctrl_i2c2>;
+	pinctrl-1 = <&pinctrl_i2c2_gpio>;
+	scl-gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>;
+	sda-gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&iomuxc {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_hog_1>;
+	imx6ul-evk {
+		pinctrl_hog_1: hoggrp-1 {
+			fsl,pins = <
+				MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059 /* SD1 CD */
+				MX6UL_PAD_GPIO1_IO05__USDHC1_VSELECT	0x17059 /* SD1 VSELECT */
+				MX6UL_PAD_GPIO1_IO09__GPIO1_IO09        0x17059 /* SD1 RESET */
+				MX6UL_PAD_SNVS_TAMPER0__GPIO5_IO00	0x80000000
+			>;
+		};
+
+		pinctrl_dvfs: dvfsgrp {
+			fsl,pins = <
+				MX6UL_PAD_SNVS_TAMPER3__GPIO5_IO03	0x79
+			>;
+		};
+
+		pinctrl_enet1: enet1grp {
+			fsl,pins = <
+				MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
+			>;
+		};
+
+		pinctrl_enet2: enet2grp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO07__ENET2_MDC		0x1b0b0
+				MX6UL_PAD_GPIO1_IO06__ENET2_MDIO	0x1b0b0
+				MX6UL_PAD_ENET2_RX_EN__ENET2_RX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_RX_ER__ENET2_RX_ER	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA0__ENET2_RDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_RX_DATA1__ENET2_RDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_EN__ENET2_TX_EN	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA0__ENET2_TDATA00	0x1b0b0
+				MX6UL_PAD_ENET2_TX_DATA1__ENET2_TDATA01	0x1b0b0
+				MX6UL_PAD_ENET2_TX_CLK__ENET2_REF_CLK2	0x4001b031
+			>;
+		};
+
+		pinctrl_i2c1: i2c1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__I2C1_SCL 0x4001b8b0
+				MX6UL_PAD_UART4_RX_DATA__I2C1_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c1_gpio: i2c1grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART4_TX_DATA__GPIO1_IO28 0x1b8b0
+				MX6UL_PAD_UART4_RX_DATA__GPIO1_IO29 0x1b8b0
+			>;
+		};
+
+		pinctrl_i2c2: i2c2grp {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__I2C2_SCL 0x4001b8b0
+				MX6UL_PAD_UART5_RX_DATA__I2C2_SDA 0x4001b8b0
+			>;
+		};
+
+		pinctrl_i2c2_gpio: i2c2grp_gpio {
+			fsl,pins = <
+				MX6UL_PAD_UART5_TX_DATA__GPIO1_IO30 0x1b8b0
+				MX6UL_PAD_UART5_RX_DATA__GPIO1_IO31 0x1b8b0
+			>;
+		};
+
+		pinctrl_qspi: qspigrp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_WP_B__QSPI_A_SCLK      0x70a1
+				MX6UL_PAD_NAND_READY_B__QSPI_A_DATA00 0x70a1
+				MX6UL_PAD_NAND_CE0_B__QSPI_A_DATA01   0x70a1
+				MX6UL_PAD_NAND_CE1_B__QSPI_A_DATA02   0x70a1
+				MX6UL_PAD_NAND_CLE__QSPI_A_DATA03     0x70a1
+				MX6UL_PAD_NAND_DQS__QSPI_A_SS0_B      0x70a1
+			>;
+		};
+
+		pinctrl_spi4: spi4grp {
+			fsl,pins = <
+				MX6UL_PAD_BOOT_MODE0__GPIO5_IO10	0x70a1
+				MX6UL_PAD_BOOT_MODE1__GPIO5_IO11	0x70a1
+				MX6UL_PAD_SNVS_TAMPER7__GPIO5_IO07	0x70a1
+				MX6UL_PAD_SNVS_TAMPER8__GPIO5_IO08	0x80000000
+			>;
+		};
+
+		pinctrl_uart1: uart1grp {
+			fsl,pins = <
+				MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX 0x1b0b1
+				MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX 0x1b0b1
+			>;
+		};
+
+		pinctrl_usb_otg1_id: usbotg1idgrp {
+			fsl,pins = <
+				MX6UL_PAD_GPIO1_IO00__ANATOP_OTG1_ID    0x17059
+			>;
+		};
+
+		pinctrl_usdhc1: usdhc1grp {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x17059
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x10071
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x17059
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x17059
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x17059
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc1_100mhz: usdhc1grp100mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170b9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100b9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170b9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170b9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170b9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170b9
+			>;
+		};
+
+		pinctrl_usdhc1_200mhz: usdhc1grp200mhz {
+			fsl,pins = <
+				MX6UL_PAD_SD1_CMD__USDHC1_CMD     0x170f9
+				MX6UL_PAD_SD1_CLK__USDHC1_CLK     0x100f9
+				MX6UL_PAD_SD1_DATA0__USDHC1_DATA0 0x170f9
+				MX6UL_PAD_SD1_DATA1__USDHC1_DATA1 0x170f9
+				MX6UL_PAD_SD1_DATA2__USDHC1_DATA2 0x170f9
+				MX6UL_PAD_SD1_DATA3__USDHC1_DATA3 0x170f9
+			>;
+		};
+
+		pinctrl_usdhc2: usdhc2grp {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_8bit: usdhc2grp_8bit {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x10069
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x17059
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
+			>;
+		};
+
+		pinctrl_usdhc2_8bit_100mhz: usdhc2grp_8bit_100mhz {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100b9
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170b9
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170b9
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170b9
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170b9
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170b9
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170b9
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170b9
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170b9
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170b9
+			>;
+		};
+
+		pinctrl_usdhc2_8bit_200mhz: usdhc2grp_8bit_200mhz {
+			fsl,pins = <
+				MX6UL_PAD_NAND_RE_B__USDHC2_CLK     0x100f9
+				MX6UL_PAD_NAND_WE_B__USDHC2_CMD     0x170f9
+				MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x170f9
+				MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x170f9
+				MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x170f9
+				MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x170f9
+				MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x170f9
+				MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x170f9
+				MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x170f9
+				MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x170f9
+			>;
+		};
+		pinctrl_wdog: wdoggrp {
+			fsl,pins = <
+				MX6UL_PAD_LCD_RESET__WDOG1_WDOG_ANY    0x30b0
+			>;
+		};
+	};
+};
+
+&qspi {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_qspi>;
+	status = "okay";
+	ddrsmp=<0>;
+
+	flash0: n25q256a@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,n25q256a";
+		spi-max-frequency = <29000000>;
+		spi-nor,ddr-quad-read-dummy = <6>;
+		reg = <0>;
+	};
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_uart1>;
+	status = "okay";
+};
+
+&usbotg1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usb_otg1_id>;
+	dr_mode = "otg";
+	srp-disable;
+	hnp-disable;
+	adp-disable;
+	status = "okay";
+};
+
+&usbotg2 {
+	dr_mode = "host";
+	disable-over-current;
+	status = "okay";
+};
+
+&usbphy1 {
+	tx-d-cal = <0x5>;
+};
+
+&usbphy2 {
+	tx-d-cal = <0x5>;
+};
+
+&usdhc1 {
+	pinctrl-names = "default", "state_100mhz", "state_200mhz";
+	pinctrl-0 = <&pinctrl_usdhc1>;
+	pinctrl-1 = <&pinctrl_usdhc1_100mhz>;
+	pinctrl-2 = <&pinctrl_usdhc1_200mhz>;
+	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
+	keep-power-in-suspend;
+	wakeup-source;
+	vmmc-supply = <&reg_sd1_vmmc>;
+	status = "okay";
+};
+
+&usdhc2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_usdhc2>;
+	non-removable;
+	status = "okay";
+};
+
+&wdog1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_wdog>;
+	fsl,ext-reset-output;
+};