arm: armada: dts: Add support for ap807-based platforms

Add support for SoCs based on AP807 die.
Remove unused include file for Armada-8020 SoC.

Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Signed-off-by: Stefan Roese <sr@denx.de>

8 files changed, 330 insertions, 379 deletions

diff --git a/arch/arm/dts/armada-7040.dtsi b/arch/arm/dts/armada-7040.dtsi
index ee9716a6c6..039d30c72a 100644
--- a/arch/arm/dts/armada-7040.dtsi
+++ b/arch/arm/dts/armada-7040.dtsi
@@ -11,7 +11,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-common.dtsi"
 #include "armada-8k.dtsi"
-#include "armada-ap806-quad.dtsi"
+#include "armada-ap806.dtsi"
+#include "armada-ap80x-quad.dtsi"
 
 /* CP110-0 Settings */
 #define CP110_NAME		cp0
diff --git a/arch/arm/dts/armada-8020.dtsi b/arch/arm/dts/armada-8020.dtsi
deleted file mode 100644
index 4c71cf3500..0000000000
--- a/arch/arm/dts/armada-8020.dtsi
+++ /dev/null
@@ -1,37 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2016- 2021 Marvell International Ltd.
- */
-
-/*
- * Device Tree file for the Armada 8020 SoC, made of an AP806 Dual and
- * two CP110.
- */
-
-#include "armada-common.dtsi"
-#include "armada-8k.dtsi"
-#include "armada-ap806-dual.dtsi"
-
-/* CP110-0 Settings */
-#define CP110_NAME		cp0
-#define CP110_NUM		0
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_NUM
-
-/* CP110-1 Settings */
-#define CP110_NAME		cp1
-#define CP110_NUM		1
-
-#include "armada-cp110.dtsi"
-
-#undef CP110_NAME
-#undef CP110_NUM
-
-/ {
-	model = "Marvell Armada 8020";
-	compatible = "marvell,armada8020", "marvell,armada-ap806-dual",
-		     "marvell,armada-ap806";
-};
diff --git a/arch/arm/dts/armada-8040.dtsi b/arch/arm/dts/armada-8040.dtsi
index 1d77e75d40..5123742b8d 100644
--- a/arch/arm/dts/armada-8040.dtsi
+++ b/arch/arm/dts/armada-8040.dtsi
@@ -11,7 +11,8 @@
 #include <dt-bindings/gpio/gpio.h>
 #include "armada-common.dtsi"
 #include "armada-8k.dtsi"
-#include "armada-ap806-quad.dtsi"
+#include "armada-ap806.dtsi"
+#include "armada-ap80x-quad.dtsi"
 
 /* CP110-0 Settings */
 #define CP110_NAME		cp0
diff --git a/arch/arm/dts/armada-ap806-quad.dtsi b/arch/arm/dts/armada-ap806-quad.dtsi
deleted file mode 100644
index ba43a4357b..0000000000
--- a/arch/arm/dts/armada-ap806-quad.dtsi
+++ /dev/null
@@ -1,82 +0,0 @@
-/*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-/*
- * Device Tree file for Marvell Armada AP806.
- */
-
-#include "armada-ap806.dtsi"
-
-/ {
-	model = "Marvell Armada AP806 Quad";
-	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
-
-	cpus {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		cpu@000 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
-			reg = <0x000>;
-			enable-method = "psci";
-		};
-		cpu@001 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
-			reg = <0x001>;
-			enable-method = "psci";
-		};
-		cpu@100 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
-			reg = <0x100>;
-			enable-method = "psci";
-		};
-		cpu@101 {
-			device_type = "cpu";
-			compatible = "arm,cortex-a72", "arm,armv8";
-			reg = <0x101>;
-			enable-method = "psci";
-		};
-	};
-};
diff --git a/arch/arm/dts/armada-ap806.dtsi b/arch/arm/dts/armada-ap806.dtsi
index 713c2dba74..f432089ab2 100644
--- a/arch/arm/dts/armada-ap806.dtsi
+++ b/arch/arm/dts/armada-ap806.dtsi
@@ -1,274 +1,39 @@
+// SPDX-License-Identifier: GPL-2.0
 /*
- * Copyright (C) 2016 Marvell Technology Group Ltd.
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPLv2 or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This library is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This library is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
+ * Copyright (C) 2020 Marvell International Ltd.
  */
 
 /*
  * Device Tree file for Marvell Armada AP806.
  */
 
-#include <dt-bindings/interrupt-controller/arm-gic.h>
+/* AP806 Settings */
+#define AP_NAME				ap806
 
-/dts-v1/;
+#include "armada-ap80x.dtsi"
 
 / {
 	model = "Marvell Armada AP806";
-	compatible = "marvell,armada-ap806";
-	#address-cells = <2>;
-	#size-cells = <2>;
-
-	aliases {
-		serial0 = &uart0;
-		serial1 = &uart1;
-	};
-
-	psci {
-		compatible = "arm,psci-0.2";
-		method = "smc";
-	};
-
-	reserved-memory {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		ranges;
-
-		psci-area@4000000 {
-			reg = <0x0 0x4000000 0x0 0x200000>;
-			no-map;
-		};
-	};
-
-	ap806 {
-		#address-cells = <2>;
-		#size-cells = <2>;
-		compatible = "simple-bus";
-		interrupt-parent = <&gic>;
-		ranges;
 
+	AP_NAME {
 		config-space {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "simple-bus";
-			ranges = <0x0 0x0 0xf0000000 0x1000000>;
-
-			gic: interrupt-controller@210000 {
-				compatible = "arm,gic-400";
-				#interrupt-cells = <3>;
-				#address-cells = <1>;
-				#size-cells = <1>;
-				ranges;
-				interrupt-controller;
-				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
-				reg = <0x210000 0x10000>,
-				      <0x220000 0x20000>,
-				      <0x240000 0x20000>,
-				      <0x260000 0x20000>;
-
-				gic_v2m0: v2m@280000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x280000 0x1000>;
-					arm,msi-base-spi = <160>;
-					arm,msi-num-spis = <32>;
-				};
-				gic_v2m1: v2m@290000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x290000 0x1000>;
-					arm,msi-base-spi = <192>;
-					arm,msi-num-spis = <32>;
-				};
-				gic_v2m2: v2m@2a0000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x2a0000 0x1000>;
-					arm,msi-base-spi = <224>;
-					arm,msi-num-spis = <32>;
-				};
-				gic_v2m3: v2m@2b0000 {
-					compatible = "arm,gic-v2m-frame";
-					msi-controller;
-					reg = <0x2b0000 0x1000>;
-					arm,msi-base-spi = <256>;
-					arm,msi-num-spis = <32>;
-				};
-			};
-
-			timer {
-				compatible = "arm,armv8-timer";
-				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
-					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
-			};
-
-			odmi: odmi@300000 {
-				compatible = "marvell,odmi-controller";
-				interrupt-controller;
-				msi-controller;
-				marvell,odmi-frames = <4>;
-				reg = <0x300000 0x4000>,
-				      <0x304000 0x4000>,
-				      <0x308000 0x4000>,
-				      <0x30C000 0x4000>;
-				marvell,spi-base = <128>, <136>, <144>, <152>;
-			};
-
-			ap_pinctl: ap-pinctl@6F4000 {
-				compatible = "marvell,ap806-pinctrl";
-				bank-name ="apn-806";
-				reg = <0x6F4000 0x10>;
-				pin-count = <20>;
-				max-func = <3>;
-
-				ap_i2c0_pins: i2c-pins-0 {
-					marvell,pins = < 4 5 >;
-					marvell,function = <3>;
-				};
-				ap_emmc_pins: emmc-pins-0 {
-					marvell,pins = < 0 1 2 3 4 5 6 7
-							 8 9 10 >;
-					marvell,function = <1>;
-				};
-			};
-
-			ap_gpio0: gpio@6F5040 {
-				compatible = "marvell,orion-gpio";
-				reg = <0x6F5040 0x40>;
-				ngpios = <20>;
-				gpio-controller;
-				#gpio-cells = <2>;
-			};
-
-			xor@400000 {
-				compatible = "marvell,mv-xor-v2";
-				reg = <0x400000 0x1000>,
-				      <0x410000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				dma-coherent;
-			};
-
-			xor@420000 {
-				compatible = "marvell,mv-xor-v2";
-				reg = <0x420000 0x1000>,
-				      <0x430000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				dma-coherent;
-			};
-
-			xor@440000 {
-				compatible = "marvell,mv-xor-v2";
-				reg = <0x440000 0x1000>,
-				      <0x450000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				dma-coherent;
-			};
-
-			xor@460000 {
-				compatible = "marvell,mv-xor-v2";
-				reg = <0x460000 0x1000>,
-				      <0x470000 0x1000>;
-				msi-parent = <&gic_v2m0>;
-				dma-coherent;
-			};
-
-			spi0: spi@510600 {
-				compatible = "marvell,armada-380-spi";
-				reg = <0x510600 0x50>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				cell-index = <0>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&ap_syscon 3>;
-				status = "disabled";
-			};
-
-			i2c0: i2c@511000 {
-				compatible = "marvell,mv78230-i2c";
-				reg = <0x511000 0x20>;
-				#address-cells = <1>;
-				#size-cells = <0>;
-				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
-				timeout-ms = <1000>;
-				clocks = <&ap_syscon 3>;
-				status = "disabled";
-			};
-
-			uart0: serial@512000 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x512000 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&ap_syscon 3>;
-				status = "disabled";
-				clock-frequency = <200000000>;
-			};
-
-			uart1: serial@512100 {
-				compatible = "snps,dw-apb-uart";
-				reg = <0x512100 0x100>;
-				reg-shift = <2>;
-				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
-				reg-io-width = <1>;
-				clocks = <&ap_syscon 3>;
-				status = "disabled";
-
-			};
-
-			ap_sdhci0: sdhci@6e0000 {
-				compatible = "marvell,armada-8k-sdhci";
-				reg = <0x6e0000 0x300>;
-				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
-				dma-coherent;
-				status = "disabled";
-			};
-
-			ap_syscon: system-controller@6f4000 {
-				compatible = "marvell,ap806-system-controller",
-					     "syscon";
-				#clock-cells = <1>;
-				clock-output-names = "ap-cpu-cluster-0",
-						     "ap-cpu-cluster-1",
-						     "ap-fixed", "ap-mss";
-				reg = <0x6f4000 0x1000>;
+			sar-reg {
+				compatible = "marvell,sample-at-reset-common",
+					     "marvell,sample-at-reset-ap806";
+				reg = <0x6F8200 0x8>;
+				sar-driver = "ap806_sar";
+				sar-name = "ap806_sar";
+				status = "okay";
+			};
+
+			thermal: thermal@6f8084 {
+				compatible = "marvell,mvebu-thermal",
+					     "marvell,thermal-ext-sensor";
+				reg = <0x6f8084 0x12>;
+				gain = <425>;
+				offset = <153400>;
+				divisor = <1000>;
+				status = "okay";
 			};
 		};
 	};
diff --git a/arch/arm/dts/armada-ap807.dtsi b/arch/arm/dts/armada-ap807.dtsi
new file mode 100644
index 0000000000..a5309f3430
--- /dev/null
+++ b/arch/arm/dts/armada-ap807.dtsi
@@ -0,0 +1,40 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP807.
+ */
+
+/* AP807 Settings */
+#define AP_NAME				ap807
+
+#include "armada-ap80x.dtsi"
+
+/ {
+	model = "Marvell Armada AP807";
+
+	AP_NAME {
+		config-space {
+			sar-reg {
+				compatible = "marvell,sample-at-reset-common",
+					     "marvell,sample-at-reset-ap807";
+				reg = <0x6F8200 0x8>;
+				sar-driver = "ap807_sar";
+				sar-name = "ap807_sar";
+				status = "okay";
+			};
+
+			thermal: thermal@6f8084 {
+				compatible = "marvell,mvebu-thermal",
+					     "marvell,thermal-ext-sensor";
+				reg = <0x6f8084 0x12>;
+				gain = <394>;
+				offset = <128900>;
+				divisor = <1000>;
+				status = "okay";
+			};
+		};
+	};
+};
diff --git a/arch/arm/dts/armada-ap80x-quad.dtsi b/arch/arm/dts/armada-ap80x-quad.dtsi
new file mode 100644
index 0000000000..1220e986e3
--- /dev/null
+++ b/arch/arm/dts/armada-ap80x-quad.dtsi
@@ -0,0 +1,52 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2018 Marvell International Ltd.
+ *
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806/AP807.
+ */
+
+/ {
+	model = "Marvell Armada AP80X Quad";
+	compatible = "marvell,armada-ap806-quad", "marvell,armada-ap806";
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		cpu@000 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x000>;
+			enable-method = "psci";
+		};
+		cpu@001 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x001>;
+			enable-method = "psci";
+		};
+		cpu@100 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x100>;
+			enable-method = "psci";
+		};
+		cpu@101 {
+			clocks;
+			u-boot,dm-pre-reloc;
+			device_type = "cpu";
+			compatible = "arm,cortex-a72", "arm,armv8";
+			reg = <0x101>;
+			enable-method = "psci";
+		};
+	};
+};
diff --git a/arch/arm/dts/armada-ap80x.dtsi b/arch/arm/dts/armada-ap80x.dtsi
new file mode 100644
index 0000000000..8787a872d8
--- /dev/null
+++ b/arch/arm/dts/armada-ap80x.dtsi
@@ -0,0 +1,211 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2020 Marvell International Ltd.
+ *
+ */
+
+/*
+ * Device Tree file for Marvell Armada AP806/AP807.
+ */
+
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/dts-v1/;
+
+/ {
+	compatible = "marvell,armada-ap806";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	psci {
+		compatible = "arm,psci-0.2";
+		method = "smc";
+	};
+
+	reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		psci-area@4000000 {
+			reg = <0x0 0x4000000 0x0 0x200000>;
+			no-map;
+		};
+	};
+
+	AP_NAME {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		compatible = "simple-bus";
+		interrupt-parent = <&gic>;
+		ranges;
+
+		config-space {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "simple-bus";
+			ranges = <0x0 0x0 0xf0000000 0x1000000>;
+
+			gic: interrupt-controller@210000 {
+				compatible = "arm,gic-400";
+				#interrupt-cells = <3>;
+				#address-cells = <1>;
+				#size-cells = <1>;
+				ranges;
+				interrupt-controller;
+				interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+				reg = <0x210000 0x10000>,
+				      <0x220000 0x20000>,
+				      <0x240000 0x20000>,
+				      <0x260000 0x20000>;
+
+				gic_v2m0: v2m@280000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x280000 0x1000>;
+					arm,msi-base-spi = <160>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m1: v2m@290000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x290000 0x1000>;
+					arm,msi-base-spi = <192>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m2: v2m@2a0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2a0000 0x1000>;
+					arm,msi-base-spi = <224>;
+					arm,msi-num-spis = <32>;
+				};
+				gic_v2m3: v2m@2b0000 {
+					compatible = "arm,gic-v2m-frame";
+					msi-controller;
+					reg = <0x2b0000 0x1000>;
+					arm,msi-base-spi = <256>;
+					arm,msi-num-spis = <32>;
+				};
+			};
+
+			timer {
+				compatible = "arm,armv8-timer";
+				interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>,
+					     <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_EDGE_RISING)>;
+			};
+
+			odmi: odmi@300000 {
+				compatible = "marvell,odmi-controller";
+				interrupt-controller;
+				msi-controller;
+				marvell,odmi-frames = <4>;
+				reg = <0x300000 0x4000>,
+				      <0x304000 0x4000>,
+				      <0x308000 0x4000>,
+				      <0x30C000 0x4000>;
+				marvell,spi-base = <128>, <136>, <144>, <152>;
+			};
+
+			ap_pinctl: ap-pinctl@6F4000 {
+				compatible = "marvell,ap806-pinctrl";
+				bank-name ="apn-806";
+				reg = <0x6F4000 0x10>;
+				pin-count = <20>;
+				max-func = <3>;
+
+				ap_i2c0_pins: i2c-pins-0 {
+					marvell,pins = < 4 5 >;
+					marvell,function = <3>;
+				};
+				ap_emmc_pins: emmc-pins-0 {
+					marvell,pins = < 0 1 2 3 4 5 6 7
+							 8 9 10 12 >;
+					marvell,function = <1>;
+				};
+			};
+
+			ap_gpio0: gpio@6F5040 {
+				compatible = "marvell,orion-gpio";
+				reg = <0x6F5040 0x40>;
+				ngpios = <20>;
+				gpio-controller;
+				#gpio-cells = <2>;
+			};
+
+			ap_spi0: spi@510600 {
+				compatible = "marvell,armada-380-spi";
+				reg = <0x510600 0x50>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				cell-index = <0>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+			};
+
+			ap_i2c0: i2c@511000 {
+				compatible = "marvell,mv78230-i2c";
+				reg = <0x511000 0x20>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+				interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+				timeout-ms = <1000>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+			};
+
+			uart0: serial@512000 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512000 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+				clock-frequency = <200000000>;
+			};
+
+			uart1: serial@512100 {
+				compatible = "snps,dw-apb-uart";
+				reg = <0x512100 0x100>;
+				reg-shift = <2>;
+				interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
+				reg-io-width = <1>;
+				clocks = <&ap_syscon 3>;
+				status = "disabled";
+
+			};
+
+			watchdog: watchdog@610000 {
+				compatible = "arm,sbsa-gwdt";
+				reg = <0x610000 0x1000>, <0x600000 0x1000>;
+			};
+
+			ap_sdhci0: sdhci@6e0000 {
+				compatible = "marvell,armada-8k-sdhci";
+				reg = <0x6e0000 0x300>;
+				interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+				dma-coherent;
+				status = "disabled";
+			};
+
+			ap_syscon: system-controller@6f4000 {
+				compatible = "marvell,ap806-system-controller",
+					     "syscon";
+				#clock-cells = <1>;
+				clock-output-names = "ap-cpu-cluster-0",
+						     "ap-cpu-cluster-1",
+						     "ap-fixed", "ap-mss";
+				reg = <0x6f4000 0x1000>;
+			};
+		};
+	};
+};