drivers: ata: Remove mvsata_ide driver

The mvsata_ide driver was due for DM conversion by v2019.07.  As that
has long passed, remove the driver and disable it in the boards which
had enabled it.

Signed-off-by: Tom Rini <trini@konsulko.com>

25 files changed, 0 insertions, 276 deletions

diff --git a/Makefile b/Makefile
index 193aa4d1c9..e423f6de74 100644
--- a/Makefile
+++ b/Makefile
@@ -1084,8 +1084,6 @@ endif
 	$(call deprecated,CONFIG_DM_MMC CONFIG_BLK,MMC,v2019.04,$(CONFIG_MMC))
 	$(call deprecated,CONFIG_DM_USB CONFIG_OF_CONTROL CONFIG_BLK,\
 		USB,v2019.07,$(CONFIG_USB))
-	$(call deprecated,CONFIG_AHCI,AHCI instead of CONFIG_MVSATA_IDE,v2019.07, \
-		$(CONFIG_MVSATA_IDE))
 	$(call deprecated,CONFIG_AHCI,AHCI,v2019.07, $(CONFIG_LIBATA))
 	$(call deprecated,CONFIG_DM_PCI,PCI,v2019.07,$(CONFIG_PCI))
 	$(call deprecated,CONFIG_DM_VIDEO,video,v2019.07,\
diff --git a/arch/arm/mach-kirkwood/include/mach/config.h b/arch/arm/mach-kirkwood/include/mach/config.h
index 4794f7aa9d..f5538f4a90 100644
--- a/arch/arm/mach-kirkwood/include/mach/config.h
+++ b/arch/arm/mach-kirkwood/include/mach/config.h
@@ -74,8 +74,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT1
 /* Needs byte-swapping for ATA data register */
 #define CONFIG_IDE_SWAP_IO
 /* Data, registers and alternate blocks are at the same offset */
diff --git a/configs/dns325_defconfig b/configs/dns325_defconfig
index a5fe9cd331..493c802d52 100644
--- a/configs/dns325_defconfig
+++ b/configs/dns325_defconfig
@@ -36,7 +36,6 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
 CONFIG_BLK=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/dreamplug_defconfig b/configs/dreamplug_defconfig
index 2c27726fcd..b4dedc9e59 100644
--- a/configs/dreamplug_defconfig
+++ b/configs/dreamplug_defconfig
@@ -34,7 +34,6 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
 CONFIG_ENV_ADDR=0x100000
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
 CONFIG_BLK=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/ds109_defconfig b/configs/ds109_defconfig
index e412e3f593..77c094b766 100644
--- a/configs/ds109_defconfig
+++ b/configs/ds109_defconfig
@@ -30,7 +30,6 @@ CONFIG_ENV_SPI_MAX_HZ=50000000
 CONFIG_ENV_ADDR=0x3D0000
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
 CONFIG_BLK=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_MVTWSI=y
diff --git a/configs/edminiv2_defconfig b/configs/edminiv2_defconfig
index 916775e9ed..0aacb35e44 100644
--- a/configs/edminiv2_defconfig
+++ b/configs/edminiv2_defconfig
@@ -32,7 +32,6 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xFFF84000
 CONFIG_NETCONSOLE=y
-CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
 CONFIG_MTD_NOR_FLASH=y
 CONFIG_FLASH_CFI_DRIVER=y
diff --git a/configs/goflexhome_defconfig b/configs/goflexhome_defconfig
index b271822dcb..6e3e6325e9 100644
--- a/configs/goflexhome_defconfig
+++ b/configs/goflexhome_defconfig
@@ -37,7 +37,6 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
 CONFIG_BLK=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/guruplug_defconfig b/configs/guruplug_defconfig
index f7e934bcf8..a3fe98cabf 100644
--- a/configs/guruplug_defconfig
+++ b/configs/guruplug_defconfig
@@ -38,7 +38,6 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
 CONFIG_BLK=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/ib62x0_defconfig b/configs/ib62x0_defconfig
index 1fbf03442d..57ccfe71fb 100644
--- a/configs/ib62x0_defconfig
+++ b/configs/ib62x0_defconfig
@@ -35,7 +35,6 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
-CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
diff --git a/configs/nas220_defconfig b/configs/nas220_defconfig
index e89b6b9e14..3e031604ee 100644
--- a/configs/nas220_defconfig
+++ b/configs/nas220_defconfig
@@ -38,7 +38,6 @@ CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
 CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
 CONFIG_BLK=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
diff --git a/configs/nsa310s_defconfig b/configs/nsa310s_defconfig
index bec1707ddc..e4cf1c470e 100644
--- a/configs/nsa310s_defconfig
+++ b/configs/nsa310s_defconfig
@@ -32,7 +32,6 @@ CONFIG_ENV_OVERWRITE=y
 CONFIG_ENV_IS_IN_NAND=y
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
 CONFIG_NETCONSOLE=y
-CONFIG_MVSATA_IDE=y
 # CONFIG_MMC is not set
 CONFIG_MTD=y
 CONFIG_MTD_RAW_NAND=y
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 3914f996d9..9ff4b8736c 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -83,12 +83,6 @@ config FSL_SATA
 	  Enable this driver to support the SATA controller found in
 	  some Freescale PowerPC SoCs.
 
-config MVSATA_IDE
-	bool "Enable Marvell SATA controller driver support via IDE interface"
-	help
-	  Enable this driver to support the SATA controller found in
-	  some Marvell SoCs, running in IDE compatibility mode using PIO.
-
 config SATA_MV
 	bool "Enable Marvell SATA controller driver support"
 	select AHCI
diff --git a/drivers/ata/Makefile b/drivers/ata/Makefile
index 98fb480700..4811b2f82c 100644
--- a/drivers/ata/Makefile
+++ b/drivers/ata/Makefile
@@ -10,7 +10,6 @@ obj-$(CONFIG_SCSI_AHCI) += ahci.o
 obj-$(CONFIG_DWC_AHSATA) += dwc_ahsata.o
 obj-$(CONFIG_FSL_SATA) += fsl_sata.o
 obj-$(CONFIG_LIBATA) += libata.o
-obj-$(CONFIG_MVSATA_IDE) += mvsata_ide.o
 obj-$(CONFIG_SATA) += sata.o
 obj-$(CONFIG_SATA_CEVA) += sata_ceva.o
 obj-$(CONFIG_SATA_MV) += sata_mv.o
diff --git a/drivers/ata/mvsata_ide.c b/drivers/ata/mvsata_ide.c
deleted file mode 100644
index 41f9a91617..0000000000
--- a/drivers/ata/mvsata_ide.c
+++ /dev/null
@@ -1,199 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2010 Albert ARIBAUD <albert.u.boot@aribaud.net>
- *
- * Written-by: Albert ARIBAUD <albert.u.boot@aribaud.net>
- */
-
-#include <common.h>
-#include <asm/io.h>
-#include <linux/delay.h>
-
-#if defined(CONFIG_ARCH_ORION5X)
-#include <asm/arch/orion5x.h>
-#elif defined(CONFIG_ARCH_KIRKWOOD)
-#include <asm/arch/soc.h>
-#elif defined(CONFIG_ARCH_MVEBU)
-#include <linux/mbus.h>
-#endif
-
-/* SATA port registers */
-struct mvsata_port_registers {
-	u32 reserved0[10];
-	u32 edma_cmd;
-	u32 reserved1[181];
-	/* offset 0x300 : ATA Interface registers */
-	u32 sstatus;
-	u32 serror;
-	u32 scontrol;
-	u32 ltmode;
-	u32 phymode3;
-	u32 phymode4;
-	u32 reserved2[5];
-	u32 phymode1;
-	u32 phymode2;
-	u32 bist_cr;
-	u32 bist_dw1;
-	u32 bist_dw2;
-	u32 serrorintrmask;
-};
-
-/*
- * Sanity checks:
- * - to compile at all, we need CONFIG_SYS_ATA_BASE_ADDR.
- * - for ide_preinit to make sense, we need at least one of
- *   CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET;
- * - for ide_preinit to be called, we need CONFIG_IDE_PREINIT.
- * Fail with an explanation message if these conditions are not met.
- * This is particularly important for CONFIG_IDE_PREINIT, because
- * its lack would not cause a build error.
- */
-
-#if !defined(CONFIG_SYS_ATA_BASE_ADDR)
-#error CONFIG_SYS_ATA_BASE_ADDR must be defined
-#elif !defined(CONFIG_SYS_ATA_IDE0_OFFSET) \
-   && !defined(CONFIG_SYS_ATA_IDE1_OFFSET)
-#error CONFIG_SYS_ATA_IDE0_OFFSET or CONFIG_SYS_ATA_IDE1_OFFSET \
-   must be defined
-#elif !defined(CONFIG_IDE_PREINIT)
-#error CONFIG_IDE_PREINIT must be defined
-#endif
-
-/*
- * Masks and values for SControl DETection and Interface Power Management,
- * and for SStatus DETection.
- */
-
-#define MVSATA_EDMA_CMD_ATA_RST		0x00000004
-#define MVSATA_SCONTROL_DET_MASK		0x0000000F
-#define MVSATA_SCONTROL_DET_NONE		0x00000000
-#define MVSATA_SCONTROL_DET_INIT		0x00000001
-#define MVSATA_SCONTROL_IPM_MASK		0x00000F00
-#define MVSATA_SCONTROL_IPM_NO_LP_ALLOWED	0x00000300
-#define MVSATA_SCONTROL_MASK \
-	(MVSATA_SCONTROL_DET_MASK|MVSATA_SCONTROL_IPM_MASK)
-#define MVSATA_PORT_INIT \
-	(MVSATA_SCONTROL_DET_INIT|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
-#define MVSATA_PORT_USE \
-	(MVSATA_SCONTROL_DET_NONE|MVSATA_SCONTROL_IPM_NO_LP_ALLOWED)
-#define MVSATA_SSTATUS_DET_MASK			0x0000000F
-#define MVSATA_SSTATUS_DET_DEVCOMM		0x00000003
-
-/*
- * Status codes to return to client callers. Currently, callers ignore
- * exact value and only care for zero or nonzero, so no need to make this
- * public, it is only #define'd for clarity.
- * If/when standard negative codes are implemented in U-Boot, then these
- * #defines should be moved to, or replaced by ones from, the common list
- * of status codes.
- */
-
-#define MVSATA_STATUS_OK	0
-#define MVSATA_STATUS_TIMEOUT	-1
-
-/*
- * Registers for SATA MBUS memory windows
- */
-
-#define MVSATA_WIN_CONTROL(w)	(MVEBU_AXP_SATA_BASE + 0x30 + ((w) << 4))
-#define MVSATA_WIN_BASE(w)	(MVEBU_AXP_SATA_BASE + 0x34 + ((w) << 4))
-
-/*
- * Initialize SATA memory windows for Armada XP
- */
-
-#ifdef CONFIG_ARCH_MVEBU
-static void mvsata_ide_conf_mbus_windows(void)
-{
-	const struct mbus_dram_target_info *dram;
-	int i;
-
-	dram = mvebu_mbus_dram_info();
-
-	/* Disable windows, Set Size/Base to 0  */
-	for (i = 0; i < 4; i++) {
-		writel(0, MVSATA_WIN_CONTROL(i));
-		writel(0, MVSATA_WIN_BASE(i));
-	}
-
-	for (i = 0; i < dram->num_cs; i++) {
-		const struct mbus_dram_window *cs = dram->cs + i;
-		writel(((cs->size - 1) & 0xffff0000) | (cs->mbus_attr << 8) |
-				(dram->mbus_dram_target_id << 4) | 1,
-				MVSATA_WIN_CONTROL(i));
-		writel(cs->base & 0xffff0000, MVSATA_WIN_BASE(i));
-	}
-}
-#endif
-
-/*
- * Initialize one MVSATAHC port: set SControl's IPM to "always active"
- * and DET to "reset", then wait for SStatus's DET to become "device and
- * comm ok" (or time out after 50 us if no device), then set SControl's
- * DET back to "no action".
- */
-
-static int mvsata_ide_initialize_port(struct mvsata_port_registers *port)
-{
-	u32 control;
-	u32 status;
-	u32 timeleft = 10000; /* wait at most 10 ms for SATA reset to complete */
-
-	/* Hard reset */
-	writel(MVSATA_EDMA_CMD_ATA_RST, &port->edma_cmd);
-	udelay(25); /* taken from original marvell port */
-	writel(0, &port->edma_cmd);
-
-	/* Set control IPM to 3 (no low power) and DET to 1 (initialize) */
-	control = readl(&port->scontrol);
-	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_INIT;
-	writel(control, &port->scontrol);
-	/* Toggle control DET back to 0 (normal operation) */
-	control = (control & ~MVSATA_SCONTROL_MASK) | MVSATA_PORT_USE;
-	writel(control, &port->scontrol);
-	/* wait for status DET to become 3 (device and communication OK) */
-	while (--timeleft) {
-		status = readl(&port->sstatus) & MVSATA_SSTATUS_DET_MASK;
-		if (status == MVSATA_SSTATUS_DET_DEVCOMM)
-			break;
-		udelay(1);
-	}
-	/* return success or time-out error depending on time left */
-	if (!timeleft)
-		return MVSATA_STATUS_TIMEOUT;
-	return MVSATA_STATUS_OK;
-}
-
-/*
- * ide_preinit() will be called by ide_init in cmd_ide.c and will
- * reset the MVSTATHC ports needed by the board.
- */
-
-int ide_preinit(void)
-{
-	int ret = MVSATA_STATUS_TIMEOUT;
-	int status;
-
-#ifdef CONFIG_ARCH_MVEBU
-	mvsata_ide_conf_mbus_windows();
-#endif
-
-	/* Enable ATA port 0 (could be SATA port 0 or 1) if declared */
-#if defined(CONFIG_SYS_ATA_IDE0_OFFSET)
-	status = mvsata_ide_initialize_port(
-		(struct mvsata_port_registers *)
-		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE0_OFFSET));
-	if (status == MVSATA_STATUS_OK)
-		ret = MVSATA_STATUS_OK;
-#endif
-	/* Enable ATA port 1 (could be SATA port 0 or 1) if declared */
-#if defined(CONFIG_SYS_ATA_IDE1_OFFSET)
-	status = mvsata_ide_initialize_port(
-		(struct mvsata_port_registers *)
-		(CONFIG_SYS_ATA_BASE_ADDR + CONFIG_SYS_ATA_IDE1_OFFSET));
-	if (status == MVSATA_STATUS_OK)
-		ret = MVSATA_STATUS_OK;
-#endif
-	/* Return success if at least one port initialization succeeded */
-	return ret;
-}
diff --git a/include/configs/dns325.h b/include/configs/dns325.h
index ea8d28b5b5..8990efb3f6 100644
--- a/include/configs/dns325.h
+++ b/include/configs/dns325.h
@@ -36,14 +36,6 @@
 #endif
 
 /*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#endif
-
-/*
  * Enable GPI0 support
  */
 #define CONFIG_KIRKWOOD_GPIO
diff --git a/include/configs/dreamplug.h b/include/configs/dreamplug.h
index 09bac01779..9106203ebc 100644
--- a/include/configs/dreamplug.h
+++ b/include/configs/dreamplug.h
@@ -52,11 +52,4 @@
 #define CONFIG_PHY_BASE_ADR	0
 #endif /* CONFIG_CMD_NET */
 
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
 #endif /* _CONFIG_DREAMPLUG_H */
diff --git a/include/configs/ds109.h b/include/configs/ds109.h
index 35d85361b4..f232abe430 100644
--- a/include/configs/ds109.h
+++ b/include/configs/ds109.h
@@ -55,11 +55,4 @@
 #define CONFIG_PHY_BASE_ADR	8
 #endif /* CONFIG_CMD_NET */
 
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
 #endif /* _CONFIG_DS109_H */
diff --git a/include/configs/edminiv2.h b/include/configs/edminiv2.h
index dd16e3fbda..949ff55624 100644
--- a/include/configs/edminiv2.h
+++ b/include/configs/edminiv2.h
@@ -122,9 +122,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-/* ED Mini V has an IDE-compatible SATA connector for port 1 */
-#define CONFIG_MVSATA_IDE_USE_PORT1
 /* Needs byte-swapping for ATA data register */
 #define CONFIG_IDE_SWAP_IO
 /* Data, registers and alternate blocks are at the same offset */
diff --git a/include/configs/goflexhome.h b/include/configs/goflexhome.h
index 51325047ec..a18e7869b0 100644
--- a/include/configs/goflexhome.h
+++ b/include/configs/goflexhome.h
@@ -72,11 +72,4 @@
 #define CONFIG_PHY_BASE_ADR	0
 #endif /* CONFIG_CMD_NET */
 
-/*
- *  * SATA Driver configuration
- *   */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
 #endif /* _CONFIG_GOFLEXHOME_H */
diff --git a/include/configs/guruplug.h b/include/configs/guruplug.h
index 1e1e5da4d5..8de888fe7e 100644
--- a/include/configs/guruplug.h
+++ b/include/configs/guruplug.h
@@ -66,11 +66,4 @@
 #define CONFIG_PHY_BASE_ADR	0
 #endif /* CONFIG_CMD_NET */
 
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
 #endif /* _CONFIG_GURUPLUG_H */
diff --git a/include/configs/ib62x0.h b/include/configs/ib62x0.h
index 41483a2f7e..ba859a9a24 100644
--- a/include/configs/ib62x0.h
+++ b/include/configs/ib62x0.h
@@ -56,9 +56,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
-#define CONFIG_MVSATA_IDE_USE_PORT1
 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
 #define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
 #endif /* CONFIG_IDE */
diff --git a/include/configs/nas220.h b/include/configs/nas220.h
index b95c7fc3be..1fd5471ac5 100644
--- a/include/configs/nas220.h
+++ b/include/configs/nas220.h
@@ -81,14 +81,6 @@
 #define CONFIG_JFFS2_LZO
 
 /*
- * SATA
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET      MV_SATA_PORT0_OFFSET
-#define CONFIG_SYS_ATA_IDE1_OFFSET      MV_SATA_PORT1_OFFSET
-#endif
-
-/*
  * EFI partition
  */
 
diff --git a/include/configs/nsa310s.h b/include/configs/nsa310s.h
index 1cb0d68b5a..e38c65a485 100644
--- a/include/configs/nsa310s.h
+++ b/include/configs/nsa310s.h
@@ -48,8 +48,6 @@
 /* SATA driver configuration */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
 #endif /* CONFIG_IDE */
 
diff --git a/include/configs/sheevaplug.h b/include/configs/sheevaplug.h
index abe8418984..41ba799659 100644
--- a/include/configs/sheevaplug.h
+++ b/include/configs/sheevaplug.h
@@ -55,9 +55,6 @@
  */
 #ifdef CONFIG_IDE
 #define __io
-#define CONFIG_IDE_PREINIT
-#define CONFIG_MVSATA_IDE_USE_PORT0
-#define CONFIG_MVSATA_IDE_USE_PORT1
 #define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
 #define CONFIG_SYS_ATA_IDE1_OFFSET	MV_SATA_PORT1_OFFSET
 #endif /* CONFIG_IDE */
diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index 6859d17654..b735865e17 100644
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -1079,8 +1079,6 @@ CONFIG_MUSB_HOST
 CONFIG_MVGBE_PORTS
 CONFIG_MVMFP_V2
 CONFIG_MVS
-CONFIG_MVSATA_IDE_USE_PORT0
-CONFIG_MVSATA_IDE_USE_PORT1
 CONFIG_MV_ETH_RXQ
 CONFIG_MV_I2C_NUM
 CONFIG_MV_I2C_REG