x86: Add Intel Cougar Canyon 2 board

This adds basic support to Intel Cougar Canyon 2 board, a board
based on Chief River platform with an Ivy Bridge processor and
a Panther Point chipset.

Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Simon Glass <sjg@chromium.org>

12 files changed, 298 insertions, 0 deletions

diff --git a/arch/x86/cpu/ivybridge/Kconfig b/arch/x86/cpu/ivybridge/Kconfig
index b9f290a864..0819347b59 100644
--- a/arch/x86/cpu/ivybridge/Kconfig
+++ b/arch/x86/cpu/ivybridge/Kconfig
@@ -79,4 +79,8 @@ config FSP_USE_UPD
 	bool
 	default n
 
+config FSP_BROKEN_HOB
+	bool
+	default y
+
 endif
diff --git a/arch/x86/dts/Makefile b/arch/x86/dts/Makefile
index 64e569432c..84feb193d7 100644
--- a/arch/x86/dts/Makefile
+++ b/arch/x86/dts/Makefile
@@ -5,6 +5,7 @@
 dtb-y += bayleybay.dtb \
 	chromebook_link.dtb \
 	chromebox_panther.dtb \
+	cougarcanyon2.dtb \
 	crownbay.dtb \
 	efi.dtb \
 	galileo.dtb \
diff --git a/arch/x86/dts/cougarcanyon2.dts b/arch/x86/dts/cougarcanyon2.dts
new file mode 100644
index 0000000000..d41556638c
--- /dev/null
+++ b/arch/x86/dts/cougarcanyon2.dts
@@ -0,0 +1,104 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+/dts-v1/;
+
+/include/ "skeleton.dtsi"
+/include/ "serial.dtsi"
+/include/ "keyboard.dtsi"
+/include/ "rtc.dtsi"
+/include/ "tsc_timer.dtsi"
+
+/ {
+	model = "Intel Cougar Canyon 2";
+	compatible = "intel,cougarcanyon2", "intel,chiefriver";
+
+	aliases {
+		spi0 = &spi0;
+	};
+
+	config {
+		silent_console = <0>;
+	};
+
+	chosen {
+		stdout-path = "/serial";
+	};
+
+	microcode {
+		update@0 {
+#include "microcode/m12306a2_00000008.dtsi"
+		};
+		update@1 {
+#include "microcode/m12306a4_00000007.dtsi"
+		};
+		update@2 {
+#include "microcode/m12306a5_00000007.dtsi"
+		};
+		update@3 {
+#include "microcode/m12306a8_00000010.dtsi"
+		};
+		update@4 {
+#include "microcode/m12306a9_0000001b.dtsi"
+		};
+	};
+
+	fsp {
+		compatible = "intel,ivybridge-fsp";
+		fsp,enable-ht;
+	};
+
+	pci {
+		#address-cells = <3>;
+		#size-cells = <2>;
+		compatible = "pci-x86";
+		u-boot,dm-pre-reloc;
+		ranges = <0x02000000 0x0 0xc0000000 0xc0000000 0 0x10000000
+			  0x42000000 0x0 0xd0000000 0xd0000000 0 0x10000000
+			  0x01000000 0x0 0x2000 0x2000 0 0xe000>;
+
+		pch@1f,0 {
+			reg = <0x0000f800 0 0 0 0>;
+			compatible = "intel,bd82x6x";
+			u-boot,dm-pre-reloc;
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			spi0: spi {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "intel,ich9-spi";
+				spi-flash@0 {
+					reg = <0>;
+					compatible = "winbond,w25q64bv", "spi-flash";
+					memory-map = <0xff800000 0x00800000>;
+				};
+			};
+
+			gpioa {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0 0x10>;
+				bank-name = "A";
+			};
+
+			gpiob {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0x30 0x10>;
+				bank-name = "B";
+			};
+
+			gpioc {
+				compatible = "intel,ich6-gpio";
+				u-boot,dm-pre-reloc;
+				reg = <0x40 0x10>;
+				bank-name = "C";
+			};
+		};
+	};
+
+};
diff --git a/board/intel/Kconfig b/board/intel/Kconfig
index f7d71c3612..4d341aa799 100644
--- a/board/intel/Kconfig
+++ b/board/intel/Kconfig
@@ -18,6 +18,14 @@ config TARGET_BAYLEYBAY
 	  4GB memory, HDMI/DP/VGA display, HD audio, SATA, USB2, USB3, SD, eMMC,
 	  PCIe and some other sensor interfaces.
 
+config TARGET_COUGARCANYON2
+	bool "Cougar Canyon 2"
+	help
+	  This is the Intel Cougar Canyon 2 Customer Reference Board. It
+	  is built on the Chief River platform with Intel Ivybridge Processor
+	  and Panther Point chipset. The board has 4GB RAM, with some other
+	  peripheral connectors for PCIe/SATA/USB2/USB3/LAN/UART/PS2/VGA/HDMI.
+
 config TARGET_CROWNBAY
 	bool "Crown Bay"
 	help
@@ -54,6 +62,7 @@ config TARGET_MINNOWMAX
 endchoice
 
 source "board/intel/bayleybay/Kconfig"
+source "board/intel/cougarcanyon2/Kconfig"
 source "board/intel/crownbay/Kconfig"
 source "board/intel/galileo/Kconfig"
 source "board/intel/minnowmax/Kconfig"
diff --git a/board/intel/cougarcanyon2/Kconfig b/board/intel/cougarcanyon2/Kconfig
new file mode 100644
index 0000000000..95a617b725
--- /dev/null
+++ b/board/intel/cougarcanyon2/Kconfig
@@ -0,0 +1,25 @@
+if TARGET_COUGARCANYON2
+
+config SYS_BOARD
+	default "cougarcanyon2"
+
+config SYS_VENDOR
+	default "intel"
+
+config SYS_SOC
+	default "ivybridge"
+
+config SYS_CONFIG_NAME
+	default "cougarcanyon2"
+
+config SYS_TEXT_BASE
+	default 0xffe00000
+
+config BOARD_SPECIFIC_OPTIONS # dummy
+	def_bool y
+	select X86_RESET_VECTOR
+	select NORTHBRIDGE_INTEL_IVYBRIDGE
+	select HAVE_FSP
+	select BOARD_ROMSIZE_KB_2048
+
+endif
diff --git a/board/intel/cougarcanyon2/MAINTAINERS b/board/intel/cougarcanyon2/MAINTAINERS
new file mode 100644
index 0000000000..a486739b5e
--- /dev/null
+++ b/board/intel/cougarcanyon2/MAINTAINERS
@@ -0,0 +1,6 @@
+INTEL COUGAR CANYON 2 BOARD
+M:	Bin Meng <bmeng.cn@gmail.com>
+S:	Maintained
+F:	board/intel/cougarcanyon2/
+F:	include/configs/cougarcanyon2.h
+F:	configs/cougarcanyon2_defconfig
diff --git a/board/intel/cougarcanyon2/Makefile b/board/intel/cougarcanyon2/Makefile
new file mode 100644
index 0000000000..abd924c6b3
--- /dev/null
+++ b/board/intel/cougarcanyon2/Makefile
@@ -0,0 +1,7 @@
+#
+# Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+#
+# SPDX-License-Identifier:	GPL-2.0+
+#
+
+obj-y	+= cougarcanyon2.o start.o
diff --git a/board/intel/cougarcanyon2/cougarcanyon2.c b/board/intel/cougarcanyon2/cougarcanyon2.c
new file mode 100644
index 0000000000..31a480a615
--- /dev/null
+++ b/board/intel/cougarcanyon2/cougarcanyon2.c
@@ -0,0 +1,58 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#include <common.h>
+#include <dm.h>
+#include <errno.h>
+#include <pci.h>
+#include <smsc_sio1007.h>
+#include <asm/ibmpc.h>
+#include <asm/pci.h>
+#include <asm/arch/pch.h>
+
+#define SIO1007_RUNTIME_IOPORT	0x180
+
+int board_early_init_f(void)
+{
+	struct udevice *pch;
+	int ret;
+
+	ret = uclass_first_device(UCLASS_PCH, &pch);
+	if (ret)
+		return ret;
+	if (!pch)
+		return -ENODEV;
+
+	/* Initialize LPC interface to turn on superio chipset decode range */
+	dm_pci_write_config16(pch, LPC_IO_DEC, COMA_DEC_RANGE | COMB_DEC_RANGE);
+	dm_pci_write_config16(pch, LPC_EN, KBC_LPC_EN | COMA_LPC_EN);
+	dm_pci_write_config32(pch, LPC_GEN1_DEC, GEN_DEC_RANGE_256B |
+			      (SIO1007_IOPORT3 & 0xff00) | GEN_DEC_RANGE_EN);
+	dm_pci_write_config32(pch, LPC_GEN2_DEC, GEN_DEC_RANGE_16B |
+			      SIO1007_RUNTIME_IOPORT | GEN_DEC_RANGE_EN);
+
+	/* Enable legacy serial port at 0x3f8 */
+	sio1007_enable_serial(SIO1007_IOPORT3, 0, UART0_BASE, UART0_IRQ);
+
+	/* Enable SIO1007 runtime I/O port at 0x180 */
+	sio1007_enable_runtime(SIO1007_IOPORT3, SIO1007_RUNTIME_IOPORT);
+
+	/*
+	 * On Cougar Canyon 2 board, the RS232 transiver connected to serial
+	 * port 0 (0x3f8) is controlled by a GPIO pin (GPIO10) on the SIO1007.
+	 * Set the pin value to 1 to enable the RS232 transiver.
+	 */
+	sio1007_gpio_config(SIO1007_IOPORT3, 0, GPIO_DIR_OUTPUT,
+			    GPIO_POL_NO_INVERT, GPIO_TYPE_PUSH_PULL);
+	sio1007_gpio_set_value(SIO1007_RUNTIME_IOPORT, 0, 1);
+
+	return 0;
+}
+
+void setup_pch_gpios(u16 gpiobase, const struct pch_gpio_map *gpio)
+{
+	return;
+}
diff --git a/board/intel/cougarcanyon2/start.S b/board/intel/cougarcanyon2/start.S
new file mode 100644
index 0000000000..d8f227c706
--- /dev/null
+++ b/board/intel/cougarcanyon2/start.S
@@ -0,0 +1,9 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+.globl early_board_init
+early_board_init:
+	jmp	early_board_init_ret
diff --git a/configs/cougarcanyon2_defconfig b/configs/cougarcanyon2_defconfig
new file mode 100644
index 0000000000..09306bbd30
--- /dev/null
+++ b/configs/cougarcanyon2_defconfig
@@ -0,0 +1,20 @@
+CONFIG_X86=y
+CONFIG_VENDOR_INTEL=y
+CONFIG_DEFAULT_DEVICE_TREE="cougarcanyon2"
+CONFIG_TARGET_COUGARCANYON2=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+CONFIG_CMD_GPIO=y
+# CONFIG_CMD_SETEXPR is not set
+# CONFIG_CMD_NFS is not set
+CONFIG_OF_CONTROL=y
+CONFIG_SPI_FLASH=y
+CONFIG_SPI_FLASH_WINBOND=y
+CONFIG_DM_PCI=y
+CONFIG_DM_RTC=y
+CONFIG_SYS_NS16550=y
+CONFIG_ICH_SPI=y
+CONFIG_TIMER=y
+CONFIG_USB=y
+CONFIG_DM_USB=y
+CONFIG_USE_PRIVATE_LIBGCC=y
diff --git a/doc/README.x86 b/doc/README.x86
index 6d9cb10edc..948decac49 100644
--- a/doc/README.x86
+++ b/doc/README.x86
@@ -133,6 +133,27 @@ $ make all
 
 ---
 
+Intel Cougar Canyon 2 specific instructions for bare mode:
+
+This uses Intel FSP for 3rd generation Intel Core and Intel Celeron processors
+with mobile Intel HM76 and QM77 chipsets platform. Download it from Intel FSP
+website and put the .fd file (CHIEFRIVER_FSP_GOLD_001_09-OCTOBER-2013.fd at the
+time of writing) in the board directory and rename it to fsp.bin.
+
+Now build U-Boot and obtain u-boot.rom
+
+$ make cougarcanyon2_defconfig
+$ make all
+
+The board has two 8MB SPI flashes mounted, which are called SPI-0 and SPI-1 in
+the board manual. The SPI-0 flash should have flash descriptor plus ME firmware
+and SPI-1 flash is used to store U-Boot. For convenience, the complete 8MB SPI-0
+flash image is included in the FSP package (named Rom00_8M_MB_PPT.bin). Program
+this image to the SPI-0 flash according to the board manual just once and we are
+all set. For programming U-Boot we just need to program SPI-1 flash.
+
+---
+
 Intel Minnowboard Max instructions for bare mode:
 
 This uses as FSP as with Crown Bay, except it is for the Atom E3800 series.
diff --git a/include/configs/cougarcanyon2.h b/include/configs/cougarcanyon2.h
new file mode 100644
index 0000000000..88845dc068
--- /dev/null
+++ b/include/configs/cougarcanyon2.h
@@ -0,0 +1,34 @@
+/*
+ * Copyright (C) 2016, Bin Meng <bmeng.cn@gmail.com>
+ *
+ * SPDX-License-Identifier:	GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#include <configs/x86-common.h>
+
+#define CONFIG_SYS_MONITOR_LEN		(2 << 20)
+#define CONFIG_BOARD_EARLY_INIT_F
+
+#define CONFIG_SMSC_SIO1007
+
+#define CONFIG_PCI_PNP
+
+#define CONFIG_STD_DEVICES_SETTINGS	"stdin=serial,i8042-kbd,usbkbd\0" \
+					"stdout=serial,vga\0" \
+					"stderr=serial,vga\0"
+
+#define CONFIG_SCSI_DEV_LIST		\
+	{PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_PANTHERPOINT_AHCI_MOBILE}
+
+/* Environment configuration */
+#define CONFIG_ENV_SECT_SIZE		0x1000
+#define CONFIG_ENV_OFFSET		0x5ff000
+
+/* Video is not supported for now */
+#undef CONFIG_VIDEO
+#undef CONFIG_CFB_CONSOLE
+
+#endif	/* __CONFIG_H */