Add initial support for MPC8349E MDS board.

8 files changed, 1178 insertions, 1 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 4a263837f8..f8134ec274 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,8 @@
 Changes since U-Boot 1.1.4:
 ======================================================================
 
+* Add initial support for MPC8349E MDS board.
+
 * Add support for ECC DDR initialization on MPC83xx.
 
 * Add DMA support for MPC83xx.
diff --git a/MAKEALL b/MAKEALL
index 68fa954d64..e377840dd9 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -116,7 +116,7 @@ LIST_8260="	\
 #########################################################################
 
 LIST_83xx="	\
-	MPC8349ADS	TQM834x\
+	MPC8349ADS	TQM834x		MPC8349EMDS			\
 "
 
 
diff --git a/Makefile b/Makefile
index 1a0e6c3c15..869d61f9ca 100644
--- a/Makefile
+++ b/Makefile
@@ -1293,6 +1293,9 @@ MPC8349ADS_config:	unconfig
 TQM834x_config:	unconfig
 	@./mkconfig $(@:_config=) ppc mpc83xx tqm834x
 
+MPC8349EMDS_config:	unconfig
+	@./mkconfig $(@:_config=) ppc mpc83xx mpc8349emds
+
 #########################################################################
 ## MPC85xx Systems
 #########################################################################
diff --git a/board/mpc8349emds/Makefile b/board/mpc8349emds/Makefile
new file mode 100644
index 0000000000..38bbb6732e
--- /dev/null
+++ b/board/mpc8349emds/Makefile
@@ -0,0 +1,46 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	:= $(BOARD).o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CPPFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+-include .depend
+
+#########################################################################
diff --git a/board/mpc8349emds/config.mk b/board/mpc8349emds/config.mk
new file mode 100644
index 0000000000..edf64d1508
--- /dev/null
+++ b/board/mpc8349emds/config.mk
@@ -0,0 +1,28 @@
+#
+# (C) Copyright 2006
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# MPC8349EMDS
+#
+
+TEXT_BASE  =   0xFE000000
diff --git a/board/mpc8349emds/mpc8349emds.c b/board/mpc8349emds/mpc8349emds.c
new file mode 100644
index 0000000000..cff4774206
--- /dev/null
+++ b/board/mpc8349emds/mpc8349emds.c
@@ -0,0 +1,279 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <common.h>
+#include <ioports.h>
+#include <mpc83xx.h>
+#include <asm/mpc8349_pci.h>
+#include <i2c.h>
+#include <spd.h>
+#include <miiphy.h>
+#if defined(CONFIG_PCI)
+#include <pci.h>
+#endif
+#if defined(CONFIG_SPD_EEPROM)
+#include <spd_sdram.h>
+#endif
+int fixed_sdram(void);
+void sdram_init(void);
+
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
+void ddr_enable_ecc(unsigned int dram_size);
+#endif
+
+int board_early_init_f (void)
+{
+	volatile u8* bcsr = (volatile u8*)CFG_BCSR;
+
+	/* Enable flash write */
+	bcsr[1] &= ~0x01;
+
+	return 0;
+}
+
+#define ns2clk(ns) (ns / (1000000000 / CONFIG_8349_CLKIN) + 1)
+
+long int initdram (int board_type)
+{
+	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+	u32 msize = 0;
+
+	if ((im->sysconf.immrbar & IMMRBAR_BASE_ADDR) != (u32)im)
+		return -1;
+
+	/* DDR SDRAM - Main SODIMM */
+	im->sysconf.ddrlaw[0].bar = CFG_DDR_BASE & LAWBAR_BAR;
+#if defined(CONFIG_SPD_EEPROM)
+
+	msize = spd_sdram(0);
+#else
+	msize = fixed_sdram();
+#endif
+	/*
+	 * Initialize SDRAM if it is on local bus.
+	 */
+	sdram_init();
+
+#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
+	/*
+	 * Initialize and enable DDR ECC.
+	 */
+	ddr_enable_ecc(msize * 1024 * 1024);
+#endif
+	puts("   DDR RAM: ");
+	/* return total bus SDRAM size(bytes)  -- DDR */
+	return (msize * 1024 * 1024);
+}
+
+#if !defined(CONFIG_SPD_EEPROM)
+/*************************************************************************
+ *  fixed sdram init -- doesn't use serial presence detect.
+ ************************************************************************/
+int fixed_sdram(void)
+{
+	volatile immap_t *im = (immap_t *)CFG_IMMRBAR;
+	u32 msize = 0;
+	u32 ddr_size;
+	u32 ddr_size_log2;
+
+	msize = CFG_DDR_SIZE;
+	for (ddr_size = msize << 20, ddr_size_log2 = 0;
+	     (ddr_size > 1);
+	     ddr_size = ddr_size>>1, ddr_size_log2++) {
+		if (ddr_size & 1) {
+			return -1;
+		}
+	}
+	im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+#if (CFG_DDR_SIZE != 256)
+#warning Currenly any ddr size other than 256 is not supported
+#endif
+
+	im->ddr.csbnds[0].csbnds = 0x00100017;
+	im->ddr.csbnds[1].csbnds = 0x0018001f;
+	im->ddr.csbnds[2].csbnds = 0x00000007;
+	im->ddr.csbnds[3].csbnds = 0x0008000f;
+	im->ddr.cs_config[0] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[1] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[2] = CFG_DDR_CONFIG;
+	im->ddr.cs_config[3] = CFG_DDR_CONFIG;
+	im->ddr.timing_cfg_1 =
+		3 << TIMING_CFG1_PRETOACT_SHIFT |
+		7 << TIMING_CFG1_ACTTOPRE_SHIFT |
+		3 << TIMING_CFG1_ACTTORW_SHIFT  |
+		4 << TIMING_CFG1_CASLAT_SHIFT   |
+		3 << TIMING_CFG1_REFREC_SHIFT   |
+		3 << TIMING_CFG1_WRREC_SHIFT    |
+		2 << TIMING_CFG1_ACTTOACT_SHIFT |
+		1 << TIMING_CFG1_WRTORD_SHIFT;
+	im->ddr.timing_cfg_2 = 2 << TIMING_CFG2_WR_DATA_DELAY_SHIFT;
+	im->ddr.sdram_cfg =
+		SDRAM_CFG_SREN
+#if defined(CONFIG_DDR_2T_TIMING)
+		| SDRAM_CFG_2T_EN
+#endif
+		| 2 << SDRAM_CFG_SDRAM_TYPE_SHIFT;
+	im->ddr.sdram_mode =
+		0x2000 << SDRAM_MODE_ESD_SHIFT |
+		0x0162 << SDRAM_MODE_SD_SHIFT;
+
+	im->ddr.sdram_interval = 0x045B << SDRAM_INTERVAL_REFINT_SHIFT |
+		0x0100 << SDRAM_INTERVAL_BSTOPRE_SHIFT;
+	udelay(200);
+
+	im->ddr.sdram_cfg |= SDRAM_CFG_MEM_EN;
+
+	return msize;
+}
+#endif/*!CFG_SPD_EEPROM*/
+
+
+int checkboard (void)
+{
+	puts("Board: Freescale MPC8349EMDS\n");
+	return 0;
+}
+
+#if defined(CONFIG_PCI)
+/*
+ * Initialize PCI Devices, report devices found
+ */
+#ifndef CONFIG_PCI_PNP
+static struct pci_config_table pci_mpc8349emds_config_table[] = {
+	{PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,PCI_ANY_ID,
+	pci_cfgfunc_config_device, {PCI_ENET0_IOADDR,
+				    PCI_ENET0_MEMADDR,
+				    PCI_COMMON_MEMORY | PCI_COMMAND_MASTER
+	} },
+	{}
+}
+#endif
+
+volatile static struct pci_controller hose[] = {
+	{
+#ifndef CONFIG_PCI_PNP
+	config_table:pci_mpc8349emds_config_table,
+#endif
+	},
+	{
+#ifndef CONFIG_PCI_PNP
+	config_table:pci_mpc8349emds_config_table,
+#endif
+	}
+};
+#endif /* CONFIG_PCI */
+
+void pci_init_board(void)
+{
+#ifdef CONFIG_PCI
+	extern void pci_mpc83xx_init(volatile struct pci_controller *hose);
+
+	pci_mpc83xx_init(hose);
+#endif /* CONFIG_PCI */
+}
+
+/*
+ * if MPC8349EMDS is soldered with SDRAM
+ */
+#if defined(CFG_BR2_PRELIM)  \
+	&& defined(CFG_OR2_PRELIM) \
+	&& defined(CFG_LBLAWBAR2_PRELIM) \
+	&& defined(CFG_LBLAWAR2_PRELIM)
+/*
+ * Initialize SDRAM memory on the Local Bus.
+ */
+
+void sdram_init(void)
+{
+	volatile immap_t *immap = (immap_t *)CFG_IMMRBAR;
+	volatile lbus8349_t *lbc= &immap->lbus;
+	uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+
+	puts("\n   SDRAM on Local Bus: ");
+	print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+
+	/*
+	 * Setup SDRAM Base and Option Registers, already done in cpu_init.c
+	 */
+
+	/* setup mtrpt, lsrt and lbcr for LB bus */
+	lbc->lbcr = CFG_LBC_LBCR;
+	lbc->mrtpr = CFG_LBC_MRTPR;
+	lbc->lsrt = CFG_LBC_LSRT;
+	asm("sync");
+
+	/*
+	 * Configure the SDRAM controller Machine Mode Register.
+	 */
+	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+
+	lbc->lsdmr = CFG_LBC_LSDMR_1; /* 0x68636733; precharge all the banks */
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+
+	lbc->lsdmr = CFG_LBC_LSDMR_2; /* 0x48636733; auto refresh */
+	asm("sync");
+	/*1 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*2 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*3 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*4 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*5 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*6 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*7 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+	/*8 times*/
+	*sdram_addr = 0xff;
+	udelay(100);
+
+	/* 0x58636733; mode register write operation */
+	lbc->lsdmr = CFG_LBC_LSDMR_4;
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+
+	lbc->lsdmr = CFG_LBC_LSDMR_5; /* 0x40636733; normal operation */
+	asm("sync");
+	*sdram_addr = 0xff;
+	udelay(100);
+}
+#else
+void sdram_init(void)
+{
+	put("SDRAM on Local Bus is NOT available!\n");
+}
+#endif
diff --git a/board/mpc8349emds/u-boot.lds b/board/mpc8349emds/u-boot.lds
new file mode 100644
index 0000000000..937c87a27c
--- /dev/null
+++ b/board/mpc8349emds/u-boot.lds
@@ -0,0 +1,123 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SECTIONS
+{
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    cpu/mpc83xx/start.o	(.text)
+    *(.text)
+    *(.fixup)
+    *(.got1)
+    . = ALIGN(16);
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+    *(.eh_frame)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x0FFF) & 0xFFFFF000;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >> 2;
+  __fixup_entries = (. - _FIXUP_TABLE_) >> 2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  . = .;
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  . = .;
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(4096);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(4096);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
+ENTRY(_start)
diff --git a/include/configs/MPC8349EMDS.h b/include/configs/MPC8349EMDS.h
new file mode 100644
index 0000000000..ef2eced3f3
--- /dev/null
+++ b/include/configs/MPC8349EMDS.h
@@ -0,0 +1,696 @@
+/*
+ * (C) Copyright 2006
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * mpc8349emds board configuration file
+ *
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG
+#undef DEBUG
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_E300		1	/* E300 Family */
+#define CONFIG_MPC83XX		1	/* MPC83XX family */
+#define CONFIG_MPC8349		1	/* MPC8349 specific */
+#define CONFIG_MPC8349EMDS	1	/* MPC8349EMDS board specific */
+
+/* FIXME: Real PCI support will come in a follow-up update. */
+#undef CONFIG_PCI
+
+#define PCI_66M
+#ifdef PCI_66M
+#define CONFIG_83XX_CLKIN	66000000	/* in Hz */
+#else
+#define CONFIG_83XX_CLKIN	33000000	/* in Hz */
+#endif
+
+#ifndef CONFIG_SYS_CLK_FREQ
+#ifdef PCI_66M
+#define CONFIG_SYS_CLK_FREQ	66000000
+#else
+#define CONFIG_SYS_CLK_FREQ	33000000
+#endif
+#endif
+
+#define CONFIG_BOARD_EARLY_INIT_F		/* call board_pre_init */
+
+#define CFG_IMMRBAR		0xE0000000
+
+#undef CFG_DRAM_TEST				/* memory test, takes time */
+#define CFG_MEMTEST_START	0x00000000      /* memtest region */
+#define CFG_MEMTEST_END		0x00100000
+
+/*
+ * DDR Setup
+ */
+#define CONFIG_DDR_ECC			/* only for ECC DDR module */
+#define CONFIG_SPD_EEPROM		/* use SPD EEPROM for DDR setup*/
+
+#define CFG_DDR_BASE		0x00000000	/* DDR is system memory*/
+#define CFG_SDRAM_BASE		CFG_DDR_BASE
+#define CFG_DDR_SDRAM_BASE	CFG_DDR_BASE
+#undef  CONFIG_DDR_2T_TIMING
+
+#if defined(CONFIG_SPD_EEPROM)
+	/*
+	 * Determine DDR configuration from I2C interface.
+	 */
+	#define SPD_EEPROM_ADDRESS	0x51		/* DDR DIMM */
+#else
+	/*
+	 * Manually set up DDR parameters
+	 */
+	#define CFG_DDR_SIZE		128		/* Mb */
+	#define CFG_DDR_CONFIG		(CSCONFIG_EN | CSCONFIG_ROW_BIT_13 | CSCONFIG_COL_BIT_9)
+	#define CFG_DDR_TIMING_1	0x37344321
+	#define CFG_DDR_TIMING_2	0x00000800	/* P9-45,may need tuning */
+	#define CFG_DDR_CONTROL		0xc2000000	/* unbuffered,no DYN_PWR */
+	#define CFG_DDR_MODE		0x00000062	/* DLL,normal,seq,4/2.5 */
+	#define CFG_DDR_INTERVAL	0x05200100	/* autocharge,no open page */
+#endif
+
+/*
+ * SDRAM on the Local Bus
+ */
+#define CFG_LBC_SDRAM_BASE	0xF0000000	/* Localbus SDRAM */
+#define CFG_LBC_SDRAM_SIZE	64		/* LBC SDRAM is 64MB */
+
+/*
+ * FLASH on the Local Bus
+ */
+#define CFG_FLASH_CFI				/* use the Common Flash Interface */
+#define CFG_FLASH_CFI_DRIVER			/* use the CFI driver */
+#define CFG_FLASH_BASE		0xFE000000	/* start of FLASH   */
+#define CFG_FLASH_SIZE		8		/* flash size in MB */
+/* #define CFG_FLASH_USE_BUFFER_WRITE */
+
+#define CFG_BR0_PRELIM		(CFG_FLASH_BASE |	/* flash Base address */ \
+				(2 << BR_PS_SHIFT) |	/* 32 bit port size */	 \
+				BR_V)			/* valid */
+
+#define CFG_OR0_PRELIM		0xFF806FF7	/* 8 MB flash size */
+#define CFG_LBLAWBAR0_PRELIM	CFG_FLASH_BASE	/* window base at flash base */
+#define CFG_LBLAWAR0_PRELIM	0x80000016	/* 8 MB window size */
+
+#define CFG_MAX_FLASH_BANKS	1		/* number of banks */
+#define CFG_MAX_FLASH_SECT	64		/* sectors per device */
+
+#undef CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	60000	/* Flash Erase Timeout (ms) */
+#define CFG_FLASH_WRITE_TOUT	500	/* Flash Write Timeout (ms) */
+
+#define CFG_MID_FLASH_JUMP	0x7F000000
+#define CFG_MONITOR_BASE	TEXT_BASE	/* start of monitor */
+
+#if (CFG_MONITOR_BASE < CFG_FLASH_BASE)
+#define CFG_RAMBOOT
+#else
+#undef  CFG_RAMBOOT
+#endif
+
+/*
+ * BCSR register on local bus 32KB, 8-bit wide for MDS config reg
+ */
+#define CFG_BCSR		0xF8000000
+#define CFG_LBLAWBAR1_PRELIM	CFG_BCSR		/* Access window base at BCSR base */
+#define CFG_LBLAWAR1_PRELIM	0x8000000E		/* Access window size 32K */
+#define CFG_BR1_PRELIM		(CFG_BCSR|0x00000801)	/* Port-size=8bit, MSEL=GPCM */
+#define CFG_OR1_PRELIM		0xFFFFE8F0		/* length 32K */
+
+#define CONFIG_L1_INIT_RAM
+#define CFG_INIT_RAM_LOCK	1
+#define CFG_INIT_RAM_ADDR	0xE8000000		/* Initial RAM address */
+#define CFG_INIT_RAM_END	0x1000			/* End of used area in RAM*/
+
+#define CFG_GBL_DATA_SIZE	0x100			/* num bytes initial data */
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN		(256 * 1024)		/* Reserve 256 kB for Mon */
+#define CFG_MALLOC_LEN		(128 * 1024)		/* Reserved for malloc */
+
+/*
+ * Local Bus LCRR and LBCR regs
+ *    LCRR:  DLL bypass, Clock divider is 4
+ * External Local Bus rate is
+ *    CLKIN * HRCWL_CSB_TO_CLKIN / HRCWL_LCL_BUS_TO_SCB_CLK / LCRR_CLKDIV
+ */
+#define CFG_LCRR	(LCRR_DBYP | LCRR_CLKDIV_4)
+#define CFG_LBC_LBCR	0x00000000
+
+#define CFG_LB_SDRAM	/* if board has SRDAM on local bus */
+
+#ifdef CFG_LB_SDRAM
+/* Local bus BR2, OR2 definition for SDRAM if soldered on the MDS board */
+/*
+ * Base Register 2 and Option Register 2 configure SDRAM.
+ * The SDRAM base address, CFG_LBC_SDRAM_BASE, is 0xf0000000.
+ *
+ * For BR2, need:
+ *    Base address of 0xf0000000 = BR[0:16] = 1111 0000 0000 0000 0
+ *    port-size = 32-bits = BR2[19:20] = 11
+ *    no parity checking = BR2[21:22] = 00
+ *    SDRAM for MSEL = BR2[24:26] = 011
+ *    Valid = BR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 0000 0000 0000 0001 1000 0110 0001 = F0001861
+ *
+ * FIXME: CFG_LBC_SDRAM_BASE should be masked and OR'ed into
+ * FIXME: the top 17 bits of BR2.
+ */
+
+#define CFG_BR2_PRELIM		0xF0001861 /* Port-size=32bit, MSEL=SDRAM */
+#define CFG_LBLAWBAR2_PRELIM	0xF0000000
+#define CFG_LBLAWAR2_PRELIM	0x80000019 /* 64M */
+
+/*
+ * The SDRAM size in MB, CFG_LBC_SDRAM_SIZE, is 64.
+ *
+ * For OR2, need:
+ *    64MB mask for AM, OR2[0:7] = 1111 1100
+ *                 XAM, OR2[17:18] = 11
+ *    9 columns OR2[19-21] = 010
+ *    13 rows   OR2[23-25] = 100
+ *    EAD set for extra time OR[31] = 1
+ *
+ * 0    4    8    12   16   20   24   28
+ * 1111 1100 0000 0000 0110 1001 0000 0001 = FC006901
+ */
+
+#define CFG_OR2_PRELIM	0xFC006901
+
+#define CFG_LBC_LSRT	0x32000000    /* LB sdram refresh timer, about 6us */
+#define CFG_LBC_MRTPR	0x20000000    /* LB refresh timer prescal, 266MHz/32 */
+
+/*
+ * LSDMR masks
+ */
+#define CFG_LBC_LSDMR_RFEN	(1 << (31 -  1))
+#define CFG_LBC_LSDMR_BSMA1516	(3 << (31 - 10))
+#define CFG_LBC_LSDMR_BSMA1617	(4 << (31 - 10))
+#define CFG_LBC_LSDMR_RFCR5	(3 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR8	(5 << (31 - 16))
+#define CFG_LBC_LSDMR_RFCR16	(7 << (31 - 16))
+#define CFG_LBC_LSDMR_PRETOACT3	(3 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT6	(5 << (31 - 19))
+#define CFG_LBC_LSDMR_PRETOACT7	(7 << (31 - 19))
+#define CFG_LBC_LSDMR_ACTTORW3	(3 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW7	(7 << (31 - 22))
+#define CFG_LBC_LSDMR_ACTTORW6	(6 << (31 - 22))
+#define CFG_LBC_LSDMR_BL8	(1 << (31 - 23))
+#define CFG_LBC_LSDMR_WRC2	(2 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC3	(3 << (31 - 27))
+#define CFG_LBC_LSDMR_WRC4	(0 << (31 - 27))
+#define CFG_LBC_LSDMR_BUFCMD	(1 << (31 - 29))
+#define CFG_LBC_LSDMR_CL3	(3 << (31 - 31))
+
+#define CFG_LBC_LSDMR_OP_NORMAL	(0 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ARFRSH	(1 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_SRFRSH	(2 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_MRW	(3 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PRECH	(4 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_PCHALL	(5 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_ACTBNK	(6 << (31 - 4))
+#define CFG_LBC_LSDMR_OP_RWINV	(7 << (31 - 4))
+
+#define CFG_LBC_LSDMR_COMMON    ( CFG_LBC_LSDMR_RFEN            \
+				| CFG_LBC_LSDMR_BSMA1516	\
+				| CFG_LBC_LSDMR_RFCR8		\
+				| CFG_LBC_LSDMR_PRETOACT6	\
+				| CFG_LBC_LSDMR_ACTTORW3	\
+				| CFG_LBC_LSDMR_BL8		\
+				| CFG_LBC_LSDMR_WRC3		\
+				| CFG_LBC_LSDMR_CL3		\
+				)
+
+/*
+ * SDRAM Controller configuration sequence.
+ */
+#define CFG_LBC_LSDMR_1		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_PCHALL)
+#define CFG_LBC_LSDMR_2		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_3		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_ARFRSH)
+#define CFG_LBC_LSDMR_4		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_MRW)
+#define CFG_LBC_LSDMR_5		( CFG_LBC_LSDMR_COMMON \
+				| CFG_LBC_LSDMR_OP_NORMAL)
+#endif
+
+/*
+ * Serial Port
+ */
+#define CONFIG_CONS_INDEX     1
+#undef CONFIG_SERIAL_SOFTWARE_FIFO
+#define CFG_NS16550
+#define CFG_NS16550_SERIAL
+#define CFG_NS16550_REG_SIZE    1
+#define CFG_NS16550_CLK		get_bus_freq(0)
+
+#define CFG_BAUDRATE_TABLE  \
+	{300, 600, 1200, 2400, 4800, 9600, 19200, 38400,115200}
+
+#define CFG_NS16550_COM1        (CFG_IMMRBAR+0x4500)
+#define CFG_NS16550_COM2        (CFG_IMMRBAR+0x4600)
+
+/* Use the HUSH parser */
+#define CFG_HUSH_PARSER
+#ifdef  CFG_HUSH_PARSER
+#define CFG_PROMPT_HUSH_PS2 "> "
+#endif
+
+/* I2C */
+#define CONFIG_HARD_I2C			/* I2C with hardware support*/
+#undef CONFIG_SOFT_I2C			/* I2C bit-banged */
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address */
+#define CFG_I2C_SLAVE		0x7F
+#define CFG_I2C_NOPROBES	{0x69}	/* Don't probe these addrs */
+#define CFG_I2C_OFFSET		0x3000
+#define CFG_I2C2_OFFSET		0x3100
+
+/* TSEC */
+#define CFG_TSEC1_OFFSET 0x24000
+#define CFG_TSEC1 (CFG_IMMRBAR+CFG_TSEC1_OFFSET)
+#define CFG_TSEC2_OFFSET 0x25000
+#define CFG_TSEC2 (CFG_IMMRBAR+CFG_TSEC2_OFFSET)
+
+/* IO Configuration */
+#define CFG_IO_CONF (\
+	IO_CONF_UART |\
+	IO_CONF_TSEC1 |\
+	IO_CONF_IRQ0 |\
+	IO_CONF_IRQ1 |\
+	IO_CONF_IRQ2 |\
+	IO_CONF_IRQ3 |\
+	IO_CONF_IRQ4 |\
+	IO_CONF_IRQ5 |\
+	IO_CONF_IRQ6 |\
+	IO_CONF_IRQ7 )
+
+/*
+ * General PCI
+ * Addresses are mapped 1-1.
+ */
+#define CFG_PCI1_MEM_BASE	0x80000000
+#define CFG_PCI1_MEM_PHYS	CFG_PCI1_MEM_BASE
+#define CFG_PCI1_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI1_IO_BASE	0x00000000
+#define CFG_PCI1_IO_PHYS	0xe2000000
+#define CFG_PCI1_IO_SIZE	0x1000000	/* 16M */
+
+#define CFG_PCI2_MEM_BASE	0xA0000000
+#define CFG_PCI2_MEM_PHYS	CFG_PCI2_MEM_BASE
+#define CFG_PCI2_MEM_SIZE	0x20000000	/* 512M */
+#define CFG_PCI2_IO_BASE	0x00000000
+#define CFG_PCI2_IO_PHYS	0xe3000000
+#define CFG_PCI2_IO_SIZE	0x1000000	/* 16M */
+
+#if defined(CONFIG_PCI)
+
+#define PCI_ALL_PCI1
+#if defined(PCI_64BIT)
+#undef PCI_ALL_PCI1
+#undef PCI_TWO_PCI1
+#undef PCI_ONE_PCI1
+#endif
+
+#define CONFIG_NET_MULTI
+#define CONFIG_PCI_PNP		/* do pci plug-and-play */
+
+#undef CONFIG_EEPRO100
+#undef CONFIG_TULIP
+
+#if !defined(CONFIG_PCI_PNP)
+	#define PCI_ENET0_IOADDR	0xFIXME
+	#define PCI_ENET0_MEMADDR	0xFIXME
+	#define PCI_IDSEL_NUMBER	0x0c 	/* slot0->3(IDSEL)=12->15 */
+#endif
+
+#undef CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup */
+#define CFG_PCI_SUBSYS_VENDORID 0x1057  /* Motorola */
+
+#endif	/* CONFIG_PCI */
+
+/*
+ * TSEC configuration
+ */
+#define CONFIG_TSEC_ENET		/* TSEC ethernet support */
+
+#if defined(CONFIG_TSEC_ENET)
+#ifndef CONFIG_NET_MULTI
+#define CONFIG_NET_MULTI	1
+#endif
+
+#define CONFIG_GMII		1	/* MII PHY management */
+#define CONFIG_MPC83XX_TSEC1	1
+#define CONFIG_MPC83XX_TSEC1_NAME	"TSEC0"
+#define CONFIG_MPC83XX_TSEC2	1
+#define CONFIG_MPC83XX_TSEC2_NAME	"TSEC1"
+#define TSEC1_PHY_ADDR		0
+#define TSEC2_PHY_ADDR		1
+#define TSEC1_PHYIDX		0
+#define TSEC2_PHYIDX		0
+
+/* Options are: TSEC[0-1] */
+#define CONFIG_ETHPRIME		"TSEC0"
+
+#endif	/* CONFIG_TSEC_ENET */
+
+/*
+ * Configure on-board RTC
+ */
+#define CONFIG_RTC_DS1374			/* use ds1374 rtc via i2c	*/
+#define CFG_I2C_RTC_ADDR		0x68	/* at address 0x68		*/
+
+/*
+ * Environment
+ */
+#ifndef CFG_RAMBOOT
+	#define CFG_ENV_IS_IN_FLASH	1
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE + 0x40000)
+	#define CFG_ENV_SECT_SIZE	0x20000	/* 128K(one sector) for env */
+	#define CFG_ENV_SIZE		0x2000
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR + CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+
+#else
+	#define CFG_NO_FLASH		1	/* Flash is not usable now */
+	#define CFG_ENV_IS_NOWHERE	1	/* Store ENV in memory only */
+	#define CFG_ENV_ADDR		(CFG_MONITOR_BASE - 0x1000)
+	#define CFG_ENV_SIZE		0x2000
+#endif
+
+#define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
+
+#if defined(CFG_RAMBOOT)
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_PCI		\
+				 | CFG_CMD_I2C          \
+				 | CFG_CMD_DATE)	\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
+#else
+#define  CONFIG_COMMANDS	((CONFIG_CMD_DFL	\
+				 | CFG_CMD_PING		\
+				 | CFG_CMD_I2C		\
+				 | CFG_CMD_DATE)	\
+				&			\
+				 ~(CFG_CMD_ENV		\
+				  | CFG_CMD_LOADS))
+#endif
+#else
+#if defined(CONFIG_PCI)
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PCI		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C		\
+				| CFG_CMD_DATE		\
+				)
+#else
+#define  CONFIG_COMMANDS	(CONFIG_CMD_DFL		\
+				| CFG_CMD_PING		\
+				| CFG_CMD_I2C       	\
+				| CFG_CMD_MII       	\
+				| CFG_CMD_DATE		\
+				)
+#endif
+#endif
+
+#include <cmd_confdefs.h>
+
+#undef CONFIG_WATCHDOG			/* watchdog disabled */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory */
+#define CFG_LOAD_ADDR	0x2000000	/* default load address */
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+	#define CFG_CBSIZE	1024		/* Console I/O Buffer Size */
+#else
+	#define CFG_CBSIZE	256		/* Console I/O Buffer Size */
+#endif
+
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args */
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size */
+#define CFG_HZ		1000		/* decrementer freq: 1ms ticks */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ	(8 << 20)	/* Initial Memory map for Linux*/
+
+/* Cache Configuration */
+#define CFG_DCACHE_SIZE		32768
+#define CFG_CACHELINE_SIZE	32
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/*log base 2 of the above value*/
+#endif
+
+#define CFG_RCWH_PCIHOST 0x80000000 /* PCIHOST  */
+
+#if 1 /*528/264*/
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X2 |\
+	HRCWL_CORE_TO_CSB_2X1)
+#elif 0 /*396/132*/
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_3X1)
+#elif 0 /*264/132*/
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_2X1)
+#elif 0 /*132/132*/
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_2X1 |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_1X1)
+#elif 0 /*264/264 */
+#define CFG_HRCW_LOW (\
+	HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
+	HRCWL_DDR_TO_SCB_CLK_1X1 |\
+	HRCWL_CSB_TO_CLKIN_4X1 |\
+	HRCWL_VCO_1X4 |\
+	HRCWL_CORE_TO_CSB_1X1)
+#endif
+
+#if defined(PCI_64BIT)
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_64_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_DISABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#else
+#define CFG_HRCW_HIGH (\
+	HRCWH_PCI_HOST |\
+	HRCWH_32_BIT_PCI |\
+	HRCWH_PCI1_ARBITER_ENABLE |\
+	HRCWH_PCI2_ARBITER_ENABLE |\
+	HRCWH_CORE_ENABLE |\
+	HRCWH_FROM_0X00000100 |\
+	HRCWH_BOOTSEQ_DISABLE |\
+	HRCWH_SW_WATCHDOG_DISABLE |\
+	HRCWH_ROM_LOC_LOCAL_16BIT |\
+	HRCWH_TSEC1M_IN_GMII |\
+	HRCWH_TSEC2M_IN_GMII )
+#endif
+
+/* System IO Config */
+#define CFG_SICRH SICRH_TSOBI1
+#define CFG_SICRL SICRL_LDP_A
+
+#define CFG_HID0_INIT	0x000000000
+#define CFG_HID0_FINAL	CFG_HID0_INIT
+
+/* #define CFG_HID0_FINAL		(\
+	HID0_ENABLE_INSTRUCTION_CACHE |\
+	HID0_ENABLE_M_BIT |\
+	HID0_ENABLE_ADDRESS_BROADCAST ) */
+
+
+#define CFG_HID2 HID2_HBE
+
+/* DDR @ 0x00000000 */
+#define CFG_IBAT0L	(CFG_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT0U	(CFG_SDRAM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+
+/* PCI @ 0x80000000 */
+#ifdef CONFIG_PCI
+#define CFG_IBAT1L	(CFG_PCI1_MEM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT1U	(CFG_PCI1_MEM_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#define CFG_IBAT2L	(CFG_PCI1_MMIO_BASE | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT2U	(CFG_PCI1_MMIO_BASE | BATU_BL_256M | BATU_VS | BATU_VP)
+#else
+#define CFG_IBAT1L	(0)
+#define CFG_IBAT1U	(0)
+#define CFG_IBAT2L	(0)
+#define CFG_IBAT2U	(0)
+#endif
+
+/* IMMRBAR @ 0xE0000000 */
+#define CFG_IBAT3L	(CFG_IMMRBAR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT3U	(CFG_IMMRBAR | BATU_BL_1M | BATU_VS | BATU_VP)
+
+/* stack in DCACHE (no backing mem) @ 0xE8000000 */
+#define CFG_IBAT4L	(CFG_INIT_RAM_ADDR | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT4U	(CFG_INIT_RAM_ADDR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+/* LBC SDRAM @ 0xF0000000 */
+#define CFG_IBAT5L	(CFG_LBC_SDRAM_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT5U	(CFG_LBC_SDRAM_BASE | BATU_BL_64M | BATU_VS | BATU_VP)
+
+/* BCSR  @ 0xF8000000 */
+#define CFG_IBAT6L	(CFG_BCSR | BATL_PP_10 | BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
+#define CFG_IBAT6U	(CFG_BCSR | BATU_BL_128K | BATU_VS | BATU_VP)
+
+/* FLASH @ 0xFE000000 */
+#define CFG_IBAT7L	(CFG_FLASH_BASE | BATL_PP_10 | BATL_MEMCOHERENCE)
+#define CFG_IBAT7U	(CFG_FLASH_BASE | BATU_BL_8M | BATU_VS | BATU_VP)
+
+#define CFG_DBAT0L	CFG_IBAT0L
+#define CFG_DBAT0U	CFG_IBAT0U
+#define CFG_DBAT1L	CFG_IBAT1L
+#define CFG_DBAT1U	CFG_IBAT1U
+#define CFG_DBAT2L	CFG_IBAT2L
+#define CFG_DBAT2U	CFG_IBAT2U
+#define CFG_DBAT3L	CFG_IBAT3L
+#define CFG_DBAT3U	CFG_IBAT3U
+#define CFG_DBAT4L	CFG_IBAT4L
+#define CFG_DBAT4U	CFG_IBAT4U
+#define CFG_DBAT5L	CFG_IBAT5L
+#define CFG_DBAT5U	CFG_IBAT5U
+#define CFG_DBAT6L	CFG_IBAT6L
+#define CFG_DBAT6U	CFG_IBAT6U
+#define CFG_DBAT7L	CFG_IBAT7L
+#define CFG_DBAT7U	CFG_IBAT7U
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01	/* Normal Power-On: Boot from FLASH */
+#define BOOTFLAG_WARM	0x02	/* Software reboot */
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed of kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+
+/*
+ * Environment Configuration
+ */
+#define CONFIG_ENV_OVERWRITE
+
+#if defined(CONFIG_TSEC_ENET)
+#define CONFIG_ETHADDR		00:04:9f:ef:23:33
+#define CONFIG_HAS_ETH1
+#define CONFIG_ETH1ADDR		00:E0:0C:00:7E:21
+#endif
+
+#define CONFIG_IPADDR		192.168.205.5
+
+#define CONFIG_HOSTNAME		mpc8349emds
+#define CONFIG_ROOTPATH		/opt/eldk/ppc_6xx
+#define CONFIG_BOOTFILE		/tftpboot/tqm83xx/uImage
+
+#define CONFIG_SERVERIP		192.168.1.1
+#define CONFIG_GATEWAYIP	192.168.1.1
+#define CONFIG_NETMASK		255.255.255.0
+
+#define CONFIG_LOADADDR		200000	/* default location for tftp and bootm */
+
+#define CONFIG_BOOTDELAY	6	/* -1 disables auto-boot */
+#undef  CONFIG_BOOTARGS			/* the boot command will set bootargs */
+
+#define CONFIG_BAUDRATE	 115200
+
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=mpc8349emds\0"					\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=${serverip}:${rootpath}\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs ${bootargs} "				\
+		"ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"	\
+		":${hostname}:${netdev}:off panic=1\0"			\
+	"addtty=setenv bootargs ${bootargs} console=ttyS0,${baudrate}\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm ${kernel_addr}\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm ${kernel_addr} ${ramdisk_addr}\0"		\
+	"net_nfs=tftp 200000 ${bootfile};run nfsargs addip addtty;"	\
+		"bootm\0"						\
+	"rootpath=/opt/eldk/ppc_6xx\0"					\
+	"bootfile=/tftpboot/mpc8349emds/uImage\0"			\
+	"load=tftp 100000 /tftpboot/mpc8349emds/u-boot.bin\0"		\
+	"update=protect off fe000000 fe03ffff; "			\
+		"era fe000000 fe03ffff; cp.b 100000 fe000000 ${filesize}\0"	\
+	"upd=run load;run update\0"					\
+	""
+
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#endif	/* __CONFIG_H */