Major cleanup for AMCC PPC4xx eval boards.

Patch by Stefan Roese, 01 Aug 2005

54 files changed, 2705 insertions, 3858 deletions

diff --git a/CHANGELOG b/CHANGELOG
index 35c3969396..37f9c579a0 100644
--- a/CHANGELOG
+++ b/CHANGELOG
@@ -2,6 +2,18 @@
 Changes for U-Boot 1.1.3:
 ======================================================================
 
+* Patch by Stefan Roese, 01 Aug 2005:
+  - Major cleanup for AMCC eval boards Walnut, Bubinga, Ebony, Ocotea
+    (former IBM eval board). Please see "doc/README.AMCC-eval-boards-cleanup"
+    for details.
+  - Sycamore (PPC405GPr) eval board added (Walnut port is extended
+    to run on both 405GP and 405GPr eval boards).
+
+* Patch by Steven Blakeslee, 27 Jul 2005:
+  - Add support for AMCC PPC440EP/GR.
+  - Add support for AMCC Yosemite PPC440EP eval board.
+  - Add support for AMCC Yellowstone PPC440GR eval board.
+
 * Fix sysmon POST problem: check I2C error codes
   This fixes a problem of displaying bogus voltages when the voltages
   are so low that the I2C devices start failing while the rest of the
diff --git a/MAINTAINERS b/MAINTAINERS
index 088ef982c5..7525dcc816 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -210,6 +210,11 @@ Keith Outwater <Keith_Outwater@mvis.com>
 	GEN860T			MPC860T
 	GEN860T_SC		MPC860T
 
+Stefan Roese <sr@denx.de>
+
+	sycamore		PPC4xx
+	walnut			PPC4xx
+
 Frank Panno <fpanno@delphintech.com>
 
 	ep8260			MPC8260
@@ -327,7 +332,6 @@ Unknown / orphaned boards:
 
 	CRAYL1			PPC4xx
 	ERIC			PPC4xx
-	WALNUT405		PPC4xx
 
 	MOUSSE			MPC824x
 
diff --git a/MAKEALL b/MAKEALL
index e9f93076d4..a636bf6e90 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -60,16 +60,17 @@ LIST_8xx="	\
 #########################################################################
 
 LIST_4xx="	\
-	ADCIOP		AR405		ASH405		BUBINGA405EP	\
+	ADCIOP		AR405		ASH405		bubinga	        \
 	CANBT		CPCI405		CPCI4052	CPCI405AB	\
 	CPCI440		CPCIISER4	CRAYL1		csb272		\
 	csb472		DASA_SIM	DP405		DU405		\
-	EBONY		ERIC		EXBITGEN	HUB405		\
+	ebony		ERIC		EXBITGEN	HUB405		\
 	JSE		MIP405		MIP405T		ML2		\
-	ml300		OCOTEA		OCRTC		ORSG		\
+	ml300		ocotea		OCRTC		ORSG		\
 	PCI405		PIP405		PLU405		PMC405		\
 	PPChameleonEVB	VOH405		W7OLMC		W7OLMG		\
-	WALNUT405	WUH405          XPEDITE1K			\
+	walnut	        WUH405          XPEDITE1K	yellowstone     \
+	yosemite                                                        \
 "
 
 #########################################################################
diff --git a/Makefile b/Makefile
index e7b36ab6b9..d23a6dde55 100644
--- a/Makefile
+++ b/Makefile
@@ -707,8 +707,11 @@ AR405_config:	unconfig
 ASH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ash405 esd
 
-BUBINGA405EP_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx bubinga405ep
+bamboo_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bamboo amcc
+
+bubinga_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx bubinga amcc
 
 CANBT_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx canbt esd
@@ -759,8 +762,8 @@ DP405_config:	unconfig
 DU405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx du405 esd
 
-EBONY_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ebony
+ebony_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ebony amcc
 
 ERIC_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx eric
@@ -794,8 +797,8 @@ ML2_config:	unconfig
 ml300_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx ml300 xilinx
 
-OCOTEA_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx ocotea
+ocotea_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx ocotea amcc
 
 OCRTC_config		\
 ORSG_config:	unconfig
@@ -846,6 +849,10 @@ PPChameleonEVB_HI_33_config:	unconfig
 sbc405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx sbc405
 
+sycamore_config:	unconfig
+	@echo "Configuring for sycamore board as subset of walnut..."
+	@./mkconfig -a walnut ppc ppc4xx walnut amcc
+
 VOH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx voh405 esd
 
@@ -856,8 +863,8 @@ W7OLMC_config	\
 W7OLMG_config: unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx w7o
 
-WALNUT405_config:	unconfig
-	@./mkconfig $(@:_config=) ppc ppc4xx walnut405
+walnut_config: unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx walnut amcc
 
 WUH405_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx wuh405 esd
@@ -865,6 +872,12 @@ WUH405_config:	unconfig
 XPEDITE1K_config:	unconfig
 	@./mkconfig $(@:_config=) ppc ppc4xx xpedite1k
 
+yosemite_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yosemite amcc
+
+yellowstone_config:	unconfig
+	@./mkconfig $(@:_config=) ppc ppc4xx yellowstone amcc
+
 #########################################################################
 ## MPC8220 Systems
 #########################################################################
diff --git a/README b/README
index c52ccbd9db..6327f64140 100644
--- a/README
+++ b/README
@@ -295,7 +295,7 @@ The following options need to be configured:
 		CONFIG_FADS823		CONFIG_NETVIA		CONFIG_V37
 		CONFIG_FADS850SAR	CONFIG_NX823		CONFIG_W7OLMC
 		CONFIG_FADS860T		CONFIG_OCRTC		CONFIG_W7OLMG
-		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT405
+		CONFIG_FLAGADM		CONFIG_ORSG		CONFIG_WALNUT
 		CONFIG_FPS850L		CONFIG_OXC		CONFIG_ZPC1900
 		CONFIG_FPS860L					CONFIG_ZUMA
 
@@ -2192,7 +2192,7 @@ configurations; the following names are supported:
 	FADS850SAR_config	omap1610h2_config	TQM850L_config
 	FADS860T_config		omap1610inn_config	TQM855L_config
 	FPS850L_config		omap5912osk_config	TQM860L_config
-				omap2420h4_config	WALNUT405_config
+				omap2420h4_config	walnut_config
 							Yukon8220_config
 							ZPC1900_config
 
@@ -3135,7 +3135,7 @@ locked as (mis-) used as memory, etc.
 	CFG_INIT_RAM_ADDR should be somewhere that won't interfere
 	with your processor/board/system design. The default value
 	you will find in any recent u-boot distribution in
-	Walnut405.h should work for you. I'd set it to a value larger
+	walnut.h should work for you. I'd set it to a value larger
 	than your SDRAM module. If you have a 64MB SDRAM module, set
 	it above 400_0000. Just make sure your board has no resources
 	that are supposed to respond to that address! That code in
diff --git a/board/amcc/bamboo/Makefile b/board/amcc/bamboo/Makefile
new file mode 100644
index 0000000000..0b9790607b
--- /dev/null
+++ b/board/amcc/bamboo/Makefile
@@ -0,0 +1,48 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB	= lib$(BOARD).a
+
+OBJS	= $(BOARD).o
+#OBJS   += flash.o
+SOBJS	= init.o
+
+$(LIB):	$(OBJS) $(SOBJS)
+	$(AR) crv $@ $(OBJS)
+
+clean:
+	rm -f $(SOBJS) $(OBJS)
+
+distclean:	clean
+	rm -f $(LIB) core *.bak .depend
+
+#########################################################################
+
+.depend:	Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+		$(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
diff --git a/board/amcc/bamboo/bamboo.c b/board/amcc/bamboo/bamboo.c
new file mode 100644
index 0000000000..7b2d3f4c38
--- /dev/null
+++ b/board/amcc/bamboo/bamboo.c
@@ -0,0 +1,439 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup the external bus controller/chip selects
+	 *-------------------------------------------------------------------*/
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
+
+#if 0 /* test-only */
+	mtebc(pb0ap, 0x03017300);	/* FLASH/SRAM */
+	mtebc(pb0cr, 0xfe0ba000);	/* BAS=0xfe0 32MB r/w 16-bit */
+
+	mtebc(pb1ap, 0x00000000);
+	mtebc(pb1cr, 0x00000000);
+
+	mtebc(pb2ap, 0x04814500);
+	/*CPLD*/ mtebc(pb2cr, 0x80018000);	/*BAS=0x800 1MB r/w 8-bit */
+#else
+	mtebc(pb0ap, 0x04055200);	/* FLASH/SRAM */
+	mtebc(pb0cr, 0xfff18000);	/* BAS=0xfe0 1MB r/w 8-bit */
+#endif
+
+	mtebc(pb3ap, 0x00000000);
+	mtebc(pb3cr, 0x00000000);
+
+	mtebc(pb4ap, 0x00000000);
+	mtebc(pb4cr, 0x00000000);
+
+	mtebc(pb5ap, 0x00000000);
+	mtebc(pb5cr, 0x00000000);
+
+	/*--------------------------------------------------------------------
+	 * Setup the interrupt controller polarities, triggers, etc.
+	 *-------------------------------------------------------------------*/
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* ATI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+
+	/*--------------------------------------------------------------------
+	 * Setup the GPIO pins
+	 *-------------------------------------------------------------------*/
+	/*CPLD cs */
+	/*setup Address lines for flash sizes larger than 16Meg. */
+	out32(GPIO0_OSRL, in32(GPIO0_OSRL) | 0x40010000);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40010000);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x40000000);
+
+	/*setup emac */
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xC080);
+	out32(GPIO0_TSRL, in32(GPIO0_TSRL) | 0x40);
+	out32(GPIO0_ISR1L, in32(GPIO0_ISR1L) | 0x55);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0x50004000);
+	out32(GPIO0_ISR1H, in32(GPIO0_ISR1H) | 0x00440000);
+
+	/*UART1 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0x02000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x00080000);
+	out32(GPIO1_ISR2L, in32(GPIO1_ISR2L) | 0x00010000);
+
+	/*setup USB 2.0 */
+	out32(GPIO1_TCR, in32(GPIO1_TCR) | 0xc0000000);
+	out32(GPIO1_OSRL, in32(GPIO1_OSRL) | 0x50000000);
+	out32(GPIO0_TCR, in32(GPIO0_TCR) | 0xf);
+	out32(GPIO0_OSRH, in32(GPIO0_OSRH) | 0xaa);
+	out32(GPIO0_ISR2H, in32(GPIO0_ISR2H) | 0x00000500);
+
+	/*--------------------------------------------------------------------
+	 * Setup other serial configuration
+	 *-------------------------------------------------------------------*/
+	mfsdr(sdr_pci0, reg);
+	mtsdr(sdr_pci0, 0x80000000 | reg);	/* PCI arbiter enabled */
+	mtsdr(sdr_pfc0, 0x00003e00);	/* Pin function */
+	mtsdr(sdr_pfc1, 0x00048000);	/* Pin function: UART0 has 4 pins */
+
+#if 0 /* test-only */
+	/*clear tmrclk divisor */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x04) = 0x00;
+
+	/*enable ethernet */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x08) = 0xf0;
+
+	/*enable usb 1.1 fs device and remove usb 2.0 reset */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x09) = 0x00;
+
+	/*get rid of flash write protect */
+	*(unsigned char *)(CFG_BCSR_BASE | 0x07) = 0x40;
+#endif
+
+	return 0;
+}
+
+int checkboard(void)
+{
+	sys_info_t sysinfo;
+	unsigned char *s = getenv("serial#");
+
+	get_sys_info(&sysinfo);
+
+	printf("Board: Bamboo - AMCC PPC440EP Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	return (0);
+}
+
+/*************************************************************************
+ *  sdram_init -- doesn't use serial presence detect.
+ *
+ *  Assumes:    256 MB, ECC, non-registered
+ *              PLB @ 133 MHz
+ *
+ ************************************************************************/
+void sdram_init(void)
+{
+	register uint reg;
+
+	/*--------------------------------------------------------------------
+	 * Setup some default
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_clktr, 0x40000000);	/* ?? */
+	mtsdram(mem_wddctr, 0x40000000);	/* ?? */
+
+	/*clear this first, if the DDR is enabled by a debugger
+	   then you can not make changes. */
+	mtsdram(mem_cfg0, 0x00000000);	/* Disable EEC */
+
+	/*--------------------------------------------------------------------
+	 * Setup for board-specific specific mem
+	 *------------------------------------------------------------------*/
+	/*
+	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
+	 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_b1cr, 0x080a4001);	/* SDBA=0x080 128MB, Mode 3, enabled */
+
+	mtsdram(mem_tr0, 0x410a4012);	/* ?? */
+	mtsdram(mem_tr1, 0x8080080b);	/* ?? */
+	mtsdram(mem_rtr, 0x04080000);	/* ?? */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	mtsdram(mem_cfg0, 0x34000000);	/* Disable EEC */
+	udelay(400);		/* Delay 200 usecs (min)            */
+
+	/*--------------------------------------------------------------------
+	 * Enable the controller, then wait for DCEN to complete
+	 *------------------------------------------------------------------*/
+	mtsdram(mem_cfg0, 0x84000000);	/* Enable */
+
+	for (;;) {
+		mfsdram(mem_mcsts, reg);
+		if (reg & 0x80000000)
+			break;
+	}
+}
+
+/*************************************************************************
+ *  long int initdram
+ *
+ ************************************************************************/
+long int initdram(int board)
+{
+	sdram_init();
+	return CFG_SDRAM_BANKS * (CFG_KBYTES_SDRAM * 1024);	/* return bytes */
+}
+
+#if defined(CFG_DRAM_TEST)
+int testdram(void)
+{
+	unsigned long *mem = (unsigned long *)0;
+	const unsigned long kend = (1024 / sizeof(unsigned long));
+	unsigned long k, n;
+
+	mtmsr(0);
+
+	for (k = 0; k < CFG_KBYTES_SDRAM;
+	     ++k, mem += (1024 / sizeof(unsigned long))) {
+		if ((k & 1023) == 0) {
+			printf("%3d MB\r", k / 1024);
+		}
+
+		memset(mem, 0xaaaaaaaa, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0xaaaaaaaa) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+
+		memset(mem, 0x55555555, 1024);
+		for (n = 0; n < kend; ++n) {
+			if (mem[n] != 0x55555555) {
+				printf("SDRAM test fails at: %08x\n",
+				       (uint) & mem[n]);
+				return 1;
+			}
+		}
+	}
+	printf("SDRAM test passes\n");
+	return 0;
+}
+#endif
+
+/*************************************************************************
+ *  pci_pre_init
+ *
+ *  This routine is called just prior to registering the hose and gives
+ *  the board the opportunity to check things. Returning a value of zero
+ *  indicates that things are bad & PCI initialization should be aborted.
+ *
+ *	Different boards may wish to customize the pci controller structure
+ *	(add regions, override default access routines, etc) or perform
+ *	certain pre-initialization actions.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
+int pci_pre_init(struct pci_controller *hose)
+{
+	unsigned long strap;
+	unsigned long addr;
+
+	/*--------------------------------------------------------------------------+
+	 *	Bamboo is always configured as the host & requires the
+	 *	PCI arbiter to be enabled.
+	 *--------------------------------------------------------------------------*/
+	mfsdr(sdr_sdstp1, strap);
+	if ((strap & SDR0_SDSTP1_PAE_MASK) == 0) {
+		printf("PCI: SDR0_STRP1[PAE] not set.\n");
+		printf("PCI: Configuration aborted.\n");
+		return 0;
+	}
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB3 devices to 0.
+	  | Set PLB3 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp1, addr);
+	mtsdr(sdr_amp1, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb3_acr);
+	mtdcr(plb3_acr, addr | 0x80000000);
+
+	/*-------------------------------------------------------------------------+
+	  | Set priority for all PLB4 devices to 0.
+	  +-------------------------------------------------------------------------*/
+	mfsdr(sdr_amp0, addr);
+	mtsdr(sdr_amp0, (addr & 0x000000FF) | 0x0000FF00);
+	addr = mfdcr(plb4_acr) | 0xa0000000;	/* Was 0x8---- */
+	mtdcr(plb4_acr, addr);
+
+	/*-------------------------------------------------------------------------+
+	  | Set Nebula PLB4 arbiter to fair mode.
+	  +-------------------------------------------------------------------------*/
+	/* Segment0 */
+	addr = (mfdcr(plb0_acr) & ~plb0_acr_ppm_mask) | plb0_acr_ppm_fair;
+	addr = (addr & ~plb0_acr_hbu_mask) | plb0_acr_hbu_enabled;
+	addr = (addr & ~plb0_acr_rdp_mask) | plb0_acr_rdp_4deep;
+	addr = (addr & ~plb0_acr_wrp_mask) | plb0_acr_wrp_2deep;
+	mtdcr(plb0_acr, addr);
+
+	/* Segment1 */
+	addr = (mfdcr(plb1_acr) & ~plb1_acr_ppm_mask) | plb1_acr_ppm_fair;
+	addr = (addr & ~plb1_acr_hbu_mask) | plb1_acr_hbu_enabled;
+	addr = (addr & ~plb1_acr_rdp_mask) | plb1_acr_rdp_4deep;
+	addr = (addr & ~plb1_acr_wrp_mask) | plb1_acr_wrp_2deep;
+	mtdcr(plb1_acr, addr);
+
+	return 1;
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+
+/*************************************************************************
+ *  pci_target_init
+ *
+ *	The bootstrap configuration provides default settings for the pci
+ *	inbound map (PIM). But the bootstrap config choices are limited and
+ *	may not be sufficient for a given board.
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
+void pci_target_init(struct pci_controller *hose)
+{
+	/*--------------------------------------------------------------------------+
+	 * Set up Direct MMIO registers
+	 *--------------------------------------------------------------------------*/
+	/*--------------------------------------------------------------------------+
+	  | PowerPC440 EP PCI Master configuration.
+	  | Map one 1Gig range of PLB/processor addresses to PCI memory space.
+	  |   PLB address 0xA0000000-0xDFFFFFFF ==> PCI address 0xA0000000-0xDFFFFFFF
+	  |   Use byte reversed out routines to handle endianess.
+	  | Make this region non-prefetchable.
+	  +--------------------------------------------------------------------------*/
+	out32r(PCIX0_PMM0MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM0LA, CFG_PCI_MEMBASE);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM0PCILA, CFG_PCI_MEMBASE);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM0PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM0MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PMM1MA, 0x00000000);	/* PMM0 Mask/Attribute - disabled b4 setting */
+	out32r(PCIX0_PMM1LA, CFG_PCI_MEMBASE2);	/* PMM0 Local Address */
+	out32r(PCIX0_PMM1PCILA, CFG_PCI_MEMBASE2);	/* PMM0 PCI Low Address */
+	out32r(PCIX0_PMM1PCIHA, 0x00000000);	/* PMM0 PCI High Address */
+	out32r(PCIX0_PMM1MA, 0xE0000001);	/* 512M + No prefetching, and enable region */
+
+	out32r(PCIX0_PTM1MS, 0x00000001);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM1LA, 0);	/* Local Addr. Reg */
+	out32r(PCIX0_PTM2MS, 0);	/* Memory Size/Attribute */
+	out32r(PCIX0_PTM2LA, 0);	/* Local Addr. Reg */
+
+	/*--------------------------------------------------------------------------+
+	 * Set up Configuration registers
+	 *--------------------------------------------------------------------------*/
+
+	/* Program the board's subsystem id/vendor id */
+	pci_write_config_word(0, PCI_SUBSYSTEM_VENDOR_ID,
+			      CFG_PCI_SUBSYS_VENDORID);
+	pci_write_config_word(0, PCI_SUBSYSTEM_ID, CFG_PCI_SUBSYS_ID);
+
+	/* Configure command register as bus master */
+	pci_write_config_word(0, PCI_COMMAND, PCI_COMMAND_MASTER);
+
+	/* 240nS PCI clock */
+	pci_write_config_word(0, PCI_LATENCY_TIMER, 1);
+
+	/* No error reporting */
+	pci_write_config_word(0, PCI_ERREN, 0);
+
+	pci_write_config_dword(0, PCI_BRDGOPT2, 0x00000101);
+
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
+
+/*************************************************************************
+ *  pci_master_init
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT)
+void pci_master_init(struct pci_controller *hose)
+{
+	unsigned short temp_short;
+
+	/*--------------------------------------------------------------------------+
+	  | Write the PowerPC440 EP PCI Configuration regs.
+	  |   Enable PowerPC440 EP to be a master on the PCI bus (PMM).
+	  |   Enable PowerPC440 EP to act as a PCI memory target (PTM).
+	  +--------------------------------------------------------------------------*/
+	pci_read_config_word(0, PCI_COMMAND, &temp_short);
+	pci_write_config_word(0, PCI_COMMAND,
+			      temp_short | PCI_COMMAND_MASTER |
+			      PCI_COMMAND_MEMORY);
+}
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_MASTER_INIT) */
+
+/*************************************************************************
+ *  is_pci_host
+ *
+ *	This routine is called to determine if a pci scan should be
+ *	performed. With various hardware environments (especially cPCI and
+ *	PPMC) it's insufficient to depend on the state of the arbiter enable
+ *	bit in the strap register, or generic host/adapter assumptions.
+ *
+ *	Rather than hard-code a bad assumption in the general 440 code, the
+ *	440 pci code requires the board to decide at runtime.
+ *
+ *	Return 0 for adapter mode, non-zero for host (monarch) mode.
+ *
+ *
+ ************************************************************************/
+#if defined(CONFIG_PCI)
+int is_pci_host(struct pci_controller *hose)
+{
+	/* Bamboo is always configured as host. */
+	return (1);
+}
+#endif				/* defined(CONFIG_PCI) */
+
+/*************************************************************************
+ *  hw_watchdog_reset
+ *
+ *	This routine is called to reset (keep alive) the watchdog timer
+ *
+ ************************************************************************/
+#if defined(CONFIG_HW_WATCHDOG)
+void hw_watchdog_reset(void)
+{
+
+}
+#endif
diff --git a/board/amcc/bamboo/config.mk b/board/amcc/bamboo/config.mk
new file mode 100644
index 0000000000..4ab0ea0084
--- /dev/null
+++ b/board/amcc/bamboo/config.mk
@@ -0,0 +1,44 @@
+#
+# (C) Copyright 2002
+# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# esd ADCIOP boards
+#
+
+#TEXT_BASE = 0x00001000
+
+ifeq ($(ramsym),1)
+TEXT_BASE = 0xFBD00000
+else
+TEXT_BASE = 0xFFF80000
+endif
+
+PLATFORM_CPPFLAGS += -DCONFIG_440=1
+
+ifeq ($(debug),1)
+PLATFORM_CPPFLAGS += -DDEBUG
+endif
+
+ifeq ($(dbcr),1)
+PLATFORM_CPPFLAGS += -DCFG_INIT_DBCR=0x8cff0000
+endif
diff --git a/board/amcc/bamboo/init.S b/board/amcc/bamboo/init.S
new file mode 100644
index 0000000000..7ba43c7b06
--- /dev/null
+++ b/board/amcc/bamboo/init.S
@@ -0,0 +1,107 @@
+/*
+*
+* See file CREDITS for list of people who contributed to this
+* project.
+*
+* This program is free software; you can redistribute it and/or
+* modify it under the terms of the GNU General Public License as
+* published by the Free Software Foundation; either version 2 of
+* the License, or (at your option) any later version.
+*
+* This program is distributed in the hope that it will be useful,
+* but WITHOUT ANY WARRANTY; without even the implied warranty of
+* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+* GNU General Public License for more details.
+*
+* You should have received a copy of the GNU General Public License
+* along with this program; if not, write to the Free Software
+* Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+* MA 02111-1307 USA
+*/
+
+#include <ppc_asm.tmpl>
+#include <config.h>
+
+/* General */
+#define TLB_VALID   0x00000200
+
+/* Supported page sizes */
+
+#define SZ_1K	    0x00000000
+#define SZ_4K	    0x00000010
+#define SZ_16K	    0x00000020
+#define SZ_64K	    0x00000030
+#define SZ_256K	    0x00000040
+#define SZ_1M	    0x00000050
+#define SZ_8M       0x00000060
+#define SZ_16M	    0x00000070
+#define SZ_256M	    0x00000090
+
+/* Storage attributes */
+#define SA_W	    0x00000800	    /* Write-through */
+#define SA_I	    0x00000400	    /* Caching inhibited */
+#define SA_M	    0x00000200	    /* Memory coherence */
+#define SA_G	    0x00000100	    /* Guarded */
+#define SA_E	    0x00000080	    /* Endian */
+
+/* Access control */
+#define AC_X	    0x00000024	    /* Execute */
+#define AC_W	    0x00000012	    /* Write */
+#define AC_R	    0x00000009	    /* Read */
+
+/* Some handy macros */
+
+#define EPN(e)		((e) & 0xfffffc00)
+#define TLB0(epn,sz)	( (EPN((epn)) | (sz) | TLB_VALID ) )
+#define TLB1(rpn,erpn)	( ((rpn)&0xfffffc00) | (erpn) )
+#define TLB2(a)		( (a)&0x00000fbf )
+
+#define tlbtab_start\
+	mflr    r1  ;\
+	bl 0f	    ;
+
+#define tlbtab_end\
+	.long 0, 0, 0	;   \
+0:	mflr    r0	;   \
+	mtlr    r1	;   \
+	blr		;
+
+#define tlbentry(epn,sz,rpn,erpn,attr)\
+	.long TLB0(epn,sz),TLB1(rpn,erpn),TLB2(attr)
+
+
+/**************************************************************************
+ * TLB TABLE
+ *
+ * This table is used by the cpu boot code to setup the initial tlb
+ * entries. Rather than make broad assumptions in the cpu source tree,
+ * this table lets each board set things up however they like.
+ *
+ *  Pointer to the table is returned in r1
+ *
+ *************************************************************************/
+
+    .section .bootpg,"ax"
+    .globl tlbtab
+
+tlbtab:
+    tlbtab_start
+	/*
+		0xf0000000 must be first, before relocation SA_I must be off to use the
+	    dcache as stack. It is patched after relocation to enable SA_I
+	*/
+    tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 0, AC_R|AC_W|AC_X|SA_G/*|SA_I*/)
+    tlbentry( CFG_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_R|AC_W|AC_X|SA_G|SA_I )
+    tlbentry( CFG_PCI_BASE, SZ_256M, 0xE0000000, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_NVRAM_BASE_ADDR, SZ_16K, 0x80000000, 0, AC_R|AC_W|AC_X|SA_W|SA_I )
+
+    /* PCI */
+    tlbentry( CFG_PCI_MEMBASE, SZ_256M, CFG_PCI_MEMBASE, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE1, SZ_256M, CFG_PCI_MEMBASE1, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE2, SZ_256M, CFG_PCI_MEMBASE2, 0, AC_R|AC_W|SA_G|SA_I )
+    tlbentry( CFG_PCI_MEMBASE3, SZ_256M, CFG_PCI_MEMBASE3, 0, AC_R|AC_W|SA_G|SA_I )
+
+    /* USB 2.0 Device */
+    tlbentry( CFG_USB_DEVICE, SZ_1K, 0x50000000, 0, AC_R|AC_W|SA_G|SA_I )
+
+    tlbtab_end
diff --git a/board/amcc/bamboo/u-boot.lds b/board/amcc/bamboo/u-boot.lds
new file mode 100644
index 0000000000..a4016d540b
--- /dev/null
+++ b/board/amcc/bamboo/u-boot.lds
@@ -0,0 +1,155 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_ARCH(powerpc)
+SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
+/* Do we need any of these for elf?
+   __DYNAMIC = 0;    */
+SECTIONS
+{
+  .resetvec 0xFFFFFFFC :
+  {
+    *(.resetvec)
+  } = 0xffff
+
+  .bootpg 0xFFFFF000 :
+  {
+    cpu/ppc4xx/start.o	(.bootpg)
+  } = 0xffff
+
+  /* Read-only sections, merged into text segment: */
+  . = + SIZEOF_HEADERS;
+  .interp : { *(.interp) }
+  .hash          : { *(.hash)		}
+  .dynsym        : { *(.dynsym)		}
+  .dynstr        : { *(.dynstr)		}
+  .rel.text      : { *(.rel.text)		}
+  .rela.text     : { *(.rela.text) 	}
+  .rel.data      : { *(.rel.data)		}
+  .rela.data     : { *(.rela.data) 	}
+  .rel.rodata    : { *(.rel.rodata) 	}
+  .rela.rodata   : { *(.rela.rodata) 	}
+  .rel.got       : { *(.rel.got)		}
+  .rela.got      : { *(.rela.got)		}
+  .rel.ctors     : { *(.rel.ctors)	}
+  .rela.ctors    : { *(.rela.ctors)	}
+  .rel.dtors     : { *(.rel.dtors)	}
+  .rela.dtors    : { *(.rela.dtors)	}
+  .rel.bss       : { *(.rel.bss)		}
+  .rela.bss      : { *(.rela.bss)		}
+  .rel.plt       : { *(.rel.plt)		}
+  .rela.plt      : { *(.rela.plt)		}
+  .init          : { *(.init)	}
+  .plt : { *(.plt) }
+  .text      :
+  {
+    /* WARNING - the following is hand-optimized to fit within	*/
+    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
+
+    cpu/ppc4xx/start.o	(.text)
+    board/amcc/bamboo/init.o	(.text)
+    cpu/ppc4xx/kgdb.o	(.text)
+    cpu/ppc4xx/traps.o	(.text)
+    cpu/ppc4xx/interrupts.o	(.text)
+    cpu/ppc4xx/serial.o	(.text)
+    cpu/ppc4xx/cpu_init.o	(.text)
+    cpu/ppc4xx/speed.o	(.text)
+    cpu/ppc4xx/405gp_enet.o	(.text)
+    common/dlmalloc.o	(.text)
+    lib_generic/crc32.o		(.text)
+    lib_ppc/extable.o	(.text)
+    lib_generic/zlib.o		(.text)
+
+/*    . = env_offset;*/
+/*    common/environment.o(.text)*/
+
+    *(.text)
+    *(.fixup)
+    *(.got1)
+  }
+  _etext = .;
+  PROVIDE (etext = .);
+  .rodata    :
+  {
+    *(.rodata)
+    *(.rodata1)
+    *(.rodata.str1.4)
+  }
+  .fini      : { *(.fini)    } =0
+  .ctors     : { *(.ctors)   }
+  .dtors     : { *(.dtors)   }
+
+  /* Read-write section, merged into data segment: */
+  . = (. + 0x00FF) & 0xFFFFFF00;
+  _erotext = .;
+  PROVIDE (erotext = .);
+  .reloc   :
+  {
+    *(.got)
+    _GOT2_TABLE_ = .;
+    *(.got2)
+    _FIXUP_TABLE_ = .;
+    *(.fixup)
+  }
+  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
+  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
+
+  .data    :
+  {
+    *(.data)
+    *(.data1)
+    *(.sdata)
+    *(.sdata2)
+    *(.dynamic)
+    CONSTRUCTORS
+  }
+  _edata  =  .;
+  PROVIDE (edata = .);
+
+  __u_boot_cmd_start = .;
+  .u_boot_cmd : { *(.u_boot_cmd) }
+  __u_boot_cmd_end = .;
+
+
+  __start___ex_table = .;
+  __ex_table : { *(__ex_table) }
+  __stop___ex_table = .;
+
+  . = ALIGN(256);
+  __init_begin = .;
+  .text.init : { *(.text.init) }
+  .data.init : { *(.data.init) }
+  . = ALIGN(256);
+  __init_end = .;
+
+  __bss_start = .;
+  .bss       :
+  {
+   *(.sbss) *(.scommon)
+   *(.dynbss)
+   *(.bss)
+   *(COMMON)
+  }
+  _end = . ;
+  PROVIDE (end = .);
+}
diff --git a/board/bubinga405ep/Makefile b/board/amcc/bubinga/Makefile
index 97d6a1e671..f5bda5519a 100644
--- a/board/bubinga405ep/Makefile
+++ b/board/amcc/bubinga/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o
-SOBJS	= init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/amcc/bubinga/bubinga.c b/board/amcc/bubinga/bubinga.c
new file mode 100644
index 0000000000..b4e9349ad7
--- /dev/null
+++ b/board/amcc/bubinga/bubinga.c
@@ -0,0 +1,84 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+long int spd_sdram(void);
+
+#include <common.h>
+#include <asm/processor.h>
+
+int board_early_init_f(void)
+{
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000010);
+	mtdcr(uicpr, 0xFFFF7FF0);	/* set int polarities */
+	mtdcr(uictr, 0x00000010);	/* set int trigger levels */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	unsigned char *s = getenv("serial#");
+
+	puts("Board: Bubinga - AMCC PPC405EP Evaluation Board");
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+	return;
+}
+
+/* -------------------------------------------------------------------------
+  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+  the necessary info for SDRAM controller configuration
+   ------------------------------------------------------------------------- */
+long int initdram(int board_type)
+{
+	long int ret;
+
+	ret = spd_sdram();
+	return ret;
+}
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("test: xxx MB - ok\n");
+
+	return (0);
+}
diff --git a/board/walnut405/config.mk b/board/amcc/bubinga/config.mk
index 8426bb38fe..1bdf5e4fcf 100644
--- a/board/walnut405/config.mk
+++ b/board/amcc/bubinga/config.mk
@@ -21,9 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/bubinga/flash.c b/board/amcc/bubinga/flash.c
new file mode 100644
index 0000000000..e4832ebf36
--- /dev/null
+++ b/board/amcc/bubinga/flash.c
@@ -0,0 +1,204 @@
+/*
+ * (C) Copyright 2000
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+	uint pbcr;
+	unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 =
+	    flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+		       size_b0, size_b0 << 20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1) {
+		/* Setup offsets */
+		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+#endif
+
+		size_b1 = 0;
+		flash_info[0].size = size_b0;
+	}
+
+	/* 2 banks */
+	else {
+		size_b1 =
+		    flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+				   &flash_info[1]);
+
+		/* Re-do sizing to get full correct info */
+
+		if (size_b1) {
+			mtdcr(ebccfga, pb0cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb0cr);
+			base_b1 = -size_b1;
+			pbcr = (pbcr & 0x0001ffff) | base_b1 |
+			    (((size_b1 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*          printf("pb1cr = %x\n", pbcr); */
+		}
+
+		if (size_b0) {
+			mtdcr(ebccfga, pb1cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb1cr);
+			base_b0 = base_b1 - size_b0;
+			pbcr = (pbcr & 0x0001ffff) | base_b0 |
+			    (((size_b0 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*            printf("pb0cr = %x\n", pbcr); */
+		}
+
+		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+		flash_get_offsets(base_b0, &flash_info[0]);
+
+		/* monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    base_b0 + size_b0 - CFG_MONITOR_LEN,
+				    base_b0 + size_b0 - 1, &flash_info[0]);
+		/* Also protect sector containing initial power-up instruction */
+		/* (flash_protect() checks address range - other call ignored) */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
+
+		if (size_b1) {
+			/* Re-do sizing to get full correct info */
+			size_b1 =
+			    flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+			flash_get_offsets(base_b1, &flash_info[1]);
+
+			/* monitor protection ON by default */
+			(void)flash_protect(FLAG_PROTECT_SET,
+					    base_b1 + size_b1 - CFG_MONITOR_LEN,
+					    base_b1 + size_b1 - 1,
+					    &flash_info[1]);
+			/* monitor protection OFF by default (one is enough) */
+			(void)flash_protect(FLAG_PROTECT_CLEAR,
+					    base_b0 + size_b0 - CFG_MONITOR_LEN,
+					    base_b0 + size_b0 - 1,
+					    &flash_info[0]);
+		} else {
+			flash_info[1].flash_id = FLASH_UNKNOWN;
+			flash_info[1].sector_count = -1;
+		}
+
+		flash_info[0].size = size_b0;
+		flash_info[1].size = size_b1;
+	}			/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id == FLASH_AM040)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+}
diff --git a/board/bubinga405ep/u-boot.lds b/board/amcc/bubinga/u-boot.lds
index 3894614a4a..b8f08eaf7e 100644
--- a/board/bubinga405ep/u-boot.lds
+++ b/board/amcc/bubinga/u-boot.lds
@@ -62,7 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/bubinga405ep/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/ocotea/flash.c b/board/amcc/common/flash.c
index bc0d2c9c16..7311c4edd5 100644
--- a/board/ocotea/flash.c
+++ b/board/amcc/common/flash.c
@@ -35,115 +35,13 @@
 #include <ppc4xx.h>
 #include <asm/processor.h>
 
-#undef DEBUG
-
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif				/* DEBUG */
-
-#define     BOOT_SMALL_FLASH        0x40 /* 01000000 */
-#define     FLASH_ONBD_N            2	/* 00000010 */
-#define     FLASH_SRAM_SEL          1	/* 00000001 */
-#define     FLASH_ONBD_N            2	/* 00000010 */
-#define     FLASH_SRAM_SEL          1	/* 00000001 */
-
-#define     BOOT_SMALL_FLASH_VAL    4
-#define     FLASH_ONBD_N_VAL        2
-#define     FLASH_SRAM_SEL_VAL      1
-
-
 flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
 
-static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
-	{0xFF800000, 0xFF880000, 0xFFC00000},	/* 0:000: configuraton 4 */
-	{0xFF900000, 0xFF980000, 0xFFC00000},	/* 1:001: configuraton 3 */
-	{0x00000000, 0x00000000, 0x00000000},	/* 2:010: configuraton 8 */
-	{0x00000000, 0x00000000, 0x00000000},	/* 3:011: configuraton 7 */
-	{0xFFE00000, 0xFFF00000, 0xFF800000},	/* 4:100: configuraton 2 */
-	{0xFFF00000, 0xFFF80000, 0xFF800000},	/* 5:101: configuraton 1 */
-	{0x00000000, 0x00000000, 0x00000000},	/* 6:110: configuraton 6 */
-	{0x00000000, 0x00000000, 0x00000000}	/* 7:111: configuraton 5 */
-};
-
 /*-----------------------------------------------------------------------
  * Functions
  */
-static ulong flash_get_size(vu_long * addr, flash_info_t * info);
 static int write_word(flash_info_t * info, ulong dest, ulong data);
 
-
-#ifdef CONFIG_OCOTEA
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init(void)
-{
-	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
-	unsigned char switch_status;
-	unsigned short index = 0;
-	int i;
-
-	/* read FPGA base register FPGA_REG0 */
-	switch_status = *fpga_base;
-
-	/* check the bitmap of switch status */
-	if (switch_status & BOOT_SMALL_FLASH) {
-		index += BOOT_SMALL_FLASH_VAL;
-	}
-	if (switch_status & FLASH_ONBD_N) {
-		index += FLASH_ONBD_N_VAL;
-	}
-	if (switch_status & FLASH_SRAM_SEL) {
-		index += FLASH_SRAM_SEL_VAL;
-	}
-
-	DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0) {
-			continue;
-		}
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size((vu_long *) flash_addr_table[index][i], &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-				i, size_b[i], size_b[i] << 20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		total_b += flash_info[i].size;
-	}
-
-	/* Monitor protection ON by default */
-	(void)flash_protect(FLAG_PROTECT_SET,
-			    -CFG_MONITOR_LEN,
-			    0xffffffff,
-			    &flash_info[2]);
-
-	return total_b;
-}
-
-/*-----------------------------------------------------------------------
- */
 void flash_print_info(flash_info_t * info)
 {
 	int i;
@@ -191,6 +89,9 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_AM800T:
 		printf("AM29LV800T (8 Mbit, top boot sector)\n");
 		break;
+	case FLASH_AMD016:
+		printf("AM29F016D (16 Mbit, uniform sector size)\n");
+		break;
 	case FLASH_AM160B:
 		printf("AM29LV160B (16 Mbit, bottom boot sect)\n");
 		break;
@@ -203,7 +104,7 @@ void flash_print_info(flash_info_t * info)
 	case FLASH_AM320T:
 		printf("AM29LV320T (32 Mbit, top boot sector)\n");
 		break;
-	case FLASH_AMDLV033C:
+	case FLASH_AM033C:
 		printf("AM29LV033C (32 Mbit, top boot sector)\n");
 		break;
 	case FLASH_SST800A:
@@ -230,7 +131,7 @@ void flash_print_info(flash_info_t * info)
 		else
 			size = info->start[0] + info->size - info->start[i];
 		erased = 1;
-		flash = (volatile unsigned long *) info->start[i];
+		flash = (volatile unsigned long *)info->start[i];
 		size = size >> 2;	/* divide by 4 for longword access */
 		for (k = 0; k < size; k++) {
 			if (*flash++ != 0xffffffff) {
@@ -249,8 +150,6 @@ void flash_print_info(flash_info_t * info)
 	return;
 }
 
-/*-----------------------------------------------------------------------
- */
 
 /*
  * The following code cannot be run from FLASH!
@@ -258,72 +157,115 @@ void flash_print_info(flash_info_t * info)
 static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 {
 	short i;
-	FLASH_WORD_SIZE value;
+	CFG_FLASH_WORD_SIZE value;
 	ulong base = (ulong) addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) addr;
 
-	DEBUGF("FLASH ADDR: %08x\n", (unsigned) addr);
+	DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr);
 
 	/* Write auto select command: read Manufacturer ID */
-	udelay(10000);
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-	udelay(1000);
-	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-	udelay(1000);
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+	addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+	addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00900090;
 	udelay(1000);
 
 	value = addr2[0];
 	DEBUGF("FLASH MANUFACT: %x\n", value);
 
 	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_MANUFACT:
+	case (CFG_FLASH_WORD_SIZE) AMD_MANUFACT:
 		info->flash_id = FLASH_MAN_AMD;
 		break;
-	case (FLASH_WORD_SIZE) FUJ_MANUFACT:
+	case (CFG_FLASH_WORD_SIZE) FUJ_MANUFACT:
 		info->flash_id = FLASH_MAN_FUJ;
 		break;
-	case (FLASH_WORD_SIZE) SST_MANUFACT:
+	case (CFG_FLASH_WORD_SIZE) SST_MANUFACT:
 		info->flash_id = FLASH_MAN_SST;
 		break;
-	case (FLASH_WORD_SIZE) STM_MANUFACT:
+	case (CFG_FLASH_WORD_SIZE) STM_MANUFACT:
 		info->flash_id = FLASH_MAN_STM;
 		break;
 	default:
 		info->flash_id = FLASH_UNKNOWN;
 		info->sector_count = 0;
 		info->size = 0;
-		return (0);		/* no or unknown flash  */
+		return (0);	/* no or unknown flash  */
 	}
 
-	value = addr2[1];		/* device ID            */
+	value = addr2[1];	/* device ID            */
 
 	DEBUGF("\nFLASH DEVICEID: %x\n", value);
 
 	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_ID_LV040B:
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
-	case (FLASH_WORD_SIZE) AMD_ID_F040B:
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
-	case (FLASH_WORD_SIZE) STM_ID_M29W040B:
+
+	case (CFG_FLASH_WORD_SIZE) STM_ID_M29W040B:
 		info->flash_id += FLASH_AM040;
 		info->sector_count = 8;
 		info->size = 0x0080000;	/* => 512 ko */
 		break;
-	case (FLASH_WORD_SIZE) AMD_ID_LV033C:
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_F016D:
+		info->flash_id += FLASH_AMD016;
+		info->sector_count = 32;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV033C:
 		info->flash_id += FLASH_AMDLV033C;
 		info->sector_count = 64;
 		info->size = 0x00400000;
-		break;			/* => 4 MB              */
+		break;		/* => 4 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400T:
+		info->flash_id += FLASH_AM400T;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV400B:
+		info->flash_id += FLASH_AM400B;
+		info->sector_count = 11;
+		info->size = 0x00080000;
+		break;		/* => 0.5 MB            */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800T:
+		info->flash_id += FLASH_AM800T;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV800B:
+		info->flash_id += FLASH_AM800B;
+		info->sector_count = 19;
+		info->size = 0x00100000;
+		break;		/* => 1 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160T:
+		info->flash_id += FLASH_AM160T;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
+	case (CFG_FLASH_WORD_SIZE) AMD_ID_LV160B:
+		info->flash_id += FLASH_AM160B;
+		info->sector_count = 35;
+		info->size = 0x00200000;
+		break;		/* => 2 MB              */
+
 	default:
 		info->flash_id = FLASH_UNKNOWN;
-		return (0);		/* => no or unknown flash */
+		return (0);	/* => no or unknown flash */
 	}
 
 	/* set up sector start address table */
@@ -340,7 +282,8 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 			info->start[2] = base + 0x00006000;
 			info->start[3] = base + 0x00008000;
 			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
 			}
 		} else {
 			/* set sector offsets for top boot block type           */
@@ -358,14 +301,14 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	for (i = 0; i < info->sector_count; i++) {
 		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
 		/* D0 = 1 if protected */
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-
-		/* For AMD29033C flash we need to resend the command of	*
-		 * reading flash protection for upper 8 Mb of flash	*/
-		if ( i == 32 ) {
-			addr2[ADDR0] = (FLASH_WORD_SIZE) 0xAAAAAAAA;
-			addr2[ADDR1] = (FLASH_WORD_SIZE) 0x55555555;
-			addr2[ADDR0] = (FLASH_WORD_SIZE) 0x90909090;
+		addr2 = (volatile CFG_FLASH_WORD_SIZE *)(info->start[i]);
+
+		/* For AMD29033C flash we need to resend the command of *
+		 * reading flash protection for upper 8 Mb of flash     */
+		if (i == 32) {
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0xAAAAAAAA;
+			addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x55555555;
+			addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x90909090;
 		}
 
 		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
@@ -375,14 +318,7 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 	}
 
 	/* issue bank reset to return to read mode */
-	addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0;
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-		/* ? ? ? */
-	}
+	addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;
 
 	return (info->size);
 }
@@ -390,13 +326,13 @@ static ulong flash_get_size(vu_long * addr, flash_info_t * info)
 int wait_for_DQ7(flash_info_t * info, int sect)
 {
 	ulong start, now, last;
-	volatile FLASH_WORD_SIZE *addr =
-		(FLASH_WORD_SIZE *) (info->start[sect]);
+	volatile CFG_FLASH_WORD_SIZE *addr =
+	    (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
 
 	start = get_timer(0);
 	last = start;
-	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) !=
-	       (FLASH_WORD_SIZE) 0x00800080) {
+	while ((addr[0] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+	       (CFG_FLASH_WORD_SIZE) 0x00800080) {
 		if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
 			printf("Timeout\n");
 			return -1;
@@ -410,13 +346,10 @@ int wait_for_DQ7(flash_info_t * info, int sect)
 	return 0;
 }
 
-/*-----------------------------------------------------------------------
- */
-
 int flash_erase(flash_info_t * info, int s_first, int s_last)
 {
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *addr2;
+	volatile CFG_FLASH_WORD_SIZE *addr = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *addr2;
 	int flag, prot, sect, l_sect;
 	int i;
 
@@ -456,24 +389,24 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	/* Start erase on unprotected sectors */
 	for (sect = s_first; sect <= s_last; sect++) {
 		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
+			addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[sect]);
 
 			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00500050;	/* block erase */
 				for (i = 0; i < 50; i++)
 					udelay(1000);	/* wait 1 ms */
 			} else {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00800080;
+				addr[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+				addr[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+				addr2[0] = (CFG_FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
 			}
 			l_sect = sect;
 			/*
@@ -495,8 +428,8 @@ int flash_erase(flash_info_t * info, int s_first, int s_last)
 	udelay(1000);
 
 	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
+	addr = (CFG_FLASH_WORD_SIZE *) info->start[0];
+	addr[0] = (CFG_FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
 
 	printf(" done\n");
 	return 0;
@@ -513,29 +446,29 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
 	ulong cp, wp, data;
 	int i, l, rc;
 
-	wp = (addr & ~3);		/* get lower word aligned address */
+	wp = (addr & ~3);	/* get lower word aligned address */
 
 	/*
 	 * handle unaligned start bytes
 	 */
 	if ((l = addr - wp) != 0) {
 		data = 0;
-	    for (i = 0, cp = wp; i < l; ++i, ++cp) {
-		    data = (data << 8) | (*(uchar *) cp);
-	    }
-	    for (; i < 4 && cnt > 0; ++i) {
-		    data = (data << 8) | *src++;
-		    --cnt;
-		    ++cp;
-	    }
-	    for (; cnt == 0 && i < 4; ++i, ++cp) {
-		    data = (data << 8) | (*(uchar *) cp);
-	    }
-
-	    if ((rc = write_word(info, wp, data)) != 0) {
-		    return (rc);
-	    }
-	    wp += 4;
+		for (i = 0, cp = wp; i < l; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+		for (; i < 4 && cnt > 0; ++i) {
+			data = (data << 8) | *src++;
+			--cnt;
+			++cp;
+		}
+		for (; cnt == 0 && i < 4; ++i, ++cp) {
+			data = (data << 8) | (*(uchar *) cp);
+		}
+
+		if ((rc = write_word(info, wp, data)) != 0) {
+			return (rc);
+		}
+		wp += 4;
 	}
 
 	/*
@@ -580,27 +513,26 @@ int write_buff(flash_info_t * info, uchar * src, ulong addr, ulong cnt)
  */
 static int write_word(flash_info_t * info, ulong dest, ulong data)
 {
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
+	volatile CFG_FLASH_WORD_SIZE *addr2 = (CFG_FLASH_WORD_SIZE *) (info->start[0]);
+	volatile CFG_FLASH_WORD_SIZE *dest2 = (CFG_FLASH_WORD_SIZE *) dest;
+	volatile CFG_FLASH_WORD_SIZE *data2 = (CFG_FLASH_WORD_SIZE *) & data;
 	ulong start;
 	int i;
 
 	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
-	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
+	if ((*((vu_long *)dest) & data) != data) {
 		return (2);
 	}
 
-	for (i = 0; i < 4 / sizeof(FLASH_WORD_SIZE); i++) {
+	for (i = 0; i < 4 / sizeof(CFG_FLASH_WORD_SIZE); i++) {
 		int flag;
 
 		/* Disable interrupts which might cause a timeout here */
 		flag = disable_interrupts();
 
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00AA00AA;
+		addr2[CFG_FLASH_ADDR1] = (CFG_FLASH_WORD_SIZE) 0x00550055;
+		addr2[CFG_FLASH_ADDR0] = (CFG_FLASH_WORD_SIZE) 0x00A000A0;
 
 		dest2[i] = data2[i];
 
@@ -610,8 +542,8 @@ static int write_word(flash_info_t * info, ulong dest, ulong data)
 
 		/* data polling for D7 */
 		start = get_timer(0);
-		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
+		while ((dest2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080) !=
+		       (data2[i] & (CFG_FLASH_WORD_SIZE) 0x00800080)) {
 
 			if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
 				return (1);
diff --git a/board/ebony/Makefile b/board/amcc/ebony/Makefile
index 4a3927be7e..4a3927be7e 100644
--- a/board/ebony/Makefile
+++ b/board/amcc/ebony/Makefile
diff --git a/board/ebony/config.mk b/board/amcc/ebony/config.mk
index 84e3e52509..e5722dd36a 100644
--- a/board/ebony/config.mk
+++ b/board/amcc/ebony/config.mk
@@ -30,7 +30,7 @@
 ifeq ($(ramsym),1)
 TEXT_BASE = 0x07FD0000
 else
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
 endif
 
 PLATFORM_CPPFLAGS += -DCONFIG_440=1
diff --git a/board/ebony/ebony.c b/board/amcc/ebony/ebony.c
index a5b3fb6538..f6bb83713f 100644
--- a/board/ebony/ebony.c
+++ b/board/amcc/ebony/ebony.c
@@ -20,9 +20,7 @@
  * MA 02111-1307 USA
  */
 
-
 #include <common.h>
-#include "ebony.h"
 #include <asm/processor.h>
 #include <spd_sdram.h>
 
@@ -30,99 +28,102 @@
 #define FLASH_ONBD_N		2	/* 00000010 */
 #define FLASH_SRAM_SEL		1	/* 00000001 */
 
-long int fixed_sdram (void);
+long int fixed_sdram(void);
 
-int board_early_init_f (void)
+int board_early_init_f(void)
 {
 	uint reg;
-	unsigned char *fpga_base = (unsigned char *) CFG_FPGA_BASE;
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
 	unsigned char status;
 
-
 	/*--------------------------------------------------------------------
 	 * Setup the external bus controller/chip selects
 	 *-------------------------------------------------------------------*/
-	mtdcr (ebccfga, xbcfg);
-	reg = mfdcr (ebccfgd);
-	mtdcr (ebccfgd, reg | 0x04000000);	/* Set ATC */
+	mtdcr(ebccfga, xbcfg);
+	reg = mfdcr(ebccfgd);
+	mtdcr(ebccfgd, reg | 0x04000000);	/* Set ATC */
 
-	mtebc (pb1ap, 0x02815480);	/* NVRAM/RTC */
-	mtebc (pb1cr, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
-	mtebc (pb7ap, 0x01015280);	/* FPGA registers */
-	mtebc (pb7cr, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
+	mtebc(pb1ap, 0x02815480);	/* NVRAM/RTC */
+	mtebc(pb1cr, 0x48018000);	/* BA=0x480 1MB R/W 8-bit */
+	mtebc(pb7ap, 0x01015280);	/* FPGA registers */
+	mtebc(pb7cr, 0x48318000);	/* BA=0x483 1MB R/W 8-bit */
 
 	/* read FPGA_REG0  and set the bus controller */
 	status = *fpga_base;
 	if ((status & BOOT_SMALL_FLASH) && !(status & FLASH_ONBD_N)) {
-		mtebc (pb0ap, 0x9b015480);	/* FLASH/SRAM */
-		mtebc (pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
-		mtebc (pb2ap, 0x9b015480);	/* 4MB FLASH */
-		mtebc (pb2cr, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
+		mtebc(pb0ap, 0x9b015480);	/* FLASH/SRAM */
+		mtebc(pb0cr, 0xfff18000);	/* BAS=0xfff 1MB R/W 8-bit */
+		mtebc(pb2ap, 0x9b015480);	/* 4MB FLASH */
+		mtebc(pb2cr, 0xff858000);	/* BAS=0xff8 4MB R/W 8-bit */
 	} else {
-		mtebc (pb0ap, 0x9b015480);	/* 4MB FLASH */
-		mtebc (pb0cr, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
+		mtebc(pb0ap, 0x9b015480);	/* 4MB FLASH */
+		mtebc(pb0cr, 0xffc58000);	/* BAS=0xffc 4MB R/W 8-bit */
 
 		/* set CS2 if FLASH_ONBD_N == 0 */
 		if (!(status & FLASH_ONBD_N)) {
-			mtebc (pb2ap, 0x9b015480);	/* FLASH/SRAM */
-			mtebc (pb2cr, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
+			mtebc(pb2ap, 0x9b015480);	/* FLASH/SRAM */
+			mtebc(pb2cr, 0xff818000);	/* BAS=0xff8 4MB R/W 8-bit */
 		}
 	}
 
 	/*--------------------------------------------------------------------
 	 * Setup the interrupt controller polarities, triggers, etc.
 	 *-------------------------------------------------------------------*/
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-	mtdcr (uic0er, 0x00000000);	/* disable all */
-	mtdcr (uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
-	mtdcr (uic0pr, 0xfffffe13);	/* per ref-board manual */
-	mtdcr (uic0tr, 0x01c00008);	/* per ref-board manual */
-	mtdcr (uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic0sr, 0xffffffff);	/* clear all */
-
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
-	mtdcr (uic1er, 0x00000000);	/* disable all */
-	mtdcr (uic1cr, 0x00000000);	/* all non-critical */
-	mtdcr (uic1pr, 0xffffe0ff);	/* per ref-board manual */
-	mtdcr (uic1tr, 0x00ffc000);	/* per ref-board manual */
-	mtdcr (uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
-	mtdcr (uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+	mtdcr(uic0er, 0x00000000);	/* disable all */
+	mtdcr(uic0cr, 0x00000009);	/* SMI & UIC1 crit are critical */
+	mtdcr(uic0pr, 0xfffffe13);	/* per ref-board manual */
+	mtdcr(uic0tr, 0x01c00008);	/* per ref-board manual */
+	mtdcr(uic0vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic0sr, 0xffffffff);	/* clear all */
+
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
+	mtdcr(uic1er, 0x00000000);	/* disable all */
+	mtdcr(uic1cr, 0x00000000);	/* all non-critical */
+	mtdcr(uic1pr, 0xffffe0ff);	/* per ref-board manual */
+	mtdcr(uic1tr, 0x00ffc000);	/* per ref-board manual */
+	mtdcr(uic1vr, 0x00000001);	/* int31 highest, base=0x000 */
+	mtdcr(uic1sr, 0xffffffff);	/* clear all */
 
 	return 0;
 }
 
-
-int checkboard (void)
+int checkboard(void)
 {
 	sys_info_t sysinfo;
+	unsigned char *s = getenv("serial#");
 
-	get_sys_info (&sysinfo);
+	get_sys_info(&sysinfo);
 
-	printf ("Board: IBM 440GP Evaluation Board (Ebony)\n");
-	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
-	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
-	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
-	printf ("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
-	printf ("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
+	printf("Board: Ebony - AMCC PPC440GP Evaluation Board");
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	printf("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
+	printf("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
+	printf("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
+	printf("\tOPB: %lu MHz\n", sysinfo.freqOPB / 1000000);
+	printf("\tEPB: %lu MHz\n", sysinfo.freqEPB / 1000000);
 	return (0);
 }
 
-
-long int initdram (int board_type)
+long int initdram(int board_type)
 {
 	long dram_size = 0;
 
 #if defined(CONFIG_SPD_EEPROM)
-	dram_size = spd_sdram (0);
+	dram_size = spd_sdram(0);
 #else
-	dram_size = fixed_sdram ();
+	dram_size = fixed_sdram();
 #endif
 	return dram_size;
 }
 
-
 #if defined(CFG_DRAM_TEST)
-int testdram (void)
+int testdram(void)
 {
 	uint *pstart = (uint *) 0x00000000;
 	uint *pend = (uint *) 0x08000000;
@@ -133,7 +134,7 @@ int testdram (void)
 
 	for (p = pstart; p < pend; p++) {
 		if (*p != 0xaaaaaaaa) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			printf("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}
@@ -143,7 +144,7 @@ int testdram (void)
 
 	for (p = pstart; p < pend; p++) {
 		if (*p != 0x55555555) {
-			printf ("SDRAM test fails at: %08x\n", (uint) p);
+			printf("SDRAM test fails at: %08x\n", (uint) p);
 			return 1;
 		}
 	}
@@ -159,18 +160,18 @@ int testdram (void)
  *              PLB @ 133 MHz
  *
  ************************************************************************/
-long int fixed_sdram (void)
+long int fixed_sdram(void)
 {
 	uint reg;
 
 	/*--------------------------------------------------------------------
 	 * Setup some default
 	 *------------------------------------------------------------------*/
-	mtsdram (mem_uabba, 0x00000000);	/* ubba=0 (default)             */
-	mtsdram (mem_slio, 0x00000000);		/* rdre=0 wrre=0 rarw=0         */
-	mtsdram (mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
-	mtsdram (mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0                 */
-	mtsdram (mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
+	mtsdram(mem_uabba, 0x00000000);	/* ubba=0 (default)             */
+	mtsdram(mem_slio, 0x00000000);	/* rdre=0 wrre=0 rarw=0         */
+	mtsdram(mem_devopt, 0x00000000);	/* dll=0 ds=0 (normal)          */
+	mtsdram(mem_wddctr, 0x00000000);	/* wrcp=0 dcd=0                 */
+	mtsdram(mem_clktr, 0x40000000);	/* clkp=1 (90 deg wr) dcdt=0    */
 
 	/*--------------------------------------------------------------------
 	 * Setup for board-specific specific mem
@@ -178,28 +179,27 @@ long int fixed_sdram (void)
 	/*
 	 * Following for CAS Latency = 2.5 @ 133 MHz PLB
 	 */
-	mtsdram (mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
-	mtsdram (mem_tr0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
+	mtsdram(mem_b0cr, 0x000a4001);	/* SDBA=0x000 128MB, Mode 3, enabled */
+	mtsdram(mem_tr0, 0x410a4012);	/* WR=2  WD=1 CL=2.5 PA=3 CP=4 LD=2 */
 	/* RA=10 RD=3                       */
-	mtsdram (mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
-	mtsdram (mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
-	mtsdram (mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
-	udelay (400);			/* Delay 200 usecs (min)            */
+	mtsdram(mem_tr1, 0x8080082f);	/* SS=T2 SL=STAGE 3 CD=1 CT=0x02f   */
+	mtsdram(mem_rtr, 0x08200000);	/* Rate 15.625 ns @ 133 MHz PLB     */
+	mtsdram(mem_cfg1, 0x00000000);	/* Self-refresh exit, disable PM    */
+	udelay(400);		/* Delay 200 usecs (min)            */
 
 	/*--------------------------------------------------------------------
 	 * Enable the controller, then wait for DCEN to complete
 	 *------------------------------------------------------------------*/
-	mtsdram (mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
+	mtsdram(mem_cfg0, 0x86000000);	/* DCEN=1, PMUD=1, 64-bit           */
 	for (;;) {
-		mfsdram (mem_mcsts, reg);
+		mfsdram(mem_mcsts, reg);
 		if (reg & 0x80000000)
 			break;
 	}
 
 	return (128 * 1024 * 1024);	/* 128 MB                           */
 }
-#endif	/* !defined(CONFIG_SPD_EEPROM) */
-
+#endif				/* !defined(CONFIG_SPD_EEPROM) */
 
 /*************************************************************************
  *  pci_pre_init
@@ -214,23 +214,23 @@ long int fixed_sdram (void)
  *
  ************************************************************************/
 #if defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT)
-int pci_pre_init(struct pci_controller * hose )
+int pci_pre_init(struct pci_controller *hose)
 {
-    unsigned long strap;
+	unsigned long strap;
 
 	/*--------------------------------------------------------------------------+
      *	The ebony board is always configured as the host & requires the
      *	PCI arbiter to be enabled.
 	 *--------------------------------------------------------------------------*/
-    strap = mfdcr(cpc0_strp1);
-    if( (strap & 0x00100000) == 0 ){
-	printf("PCI: CPC0_STRP1[PAE] not set.\n");
-	return 0;
-    }
+	strap = mfdcr(cpc0_strp1);
+	if ((strap & 0x00100000) == 0) {
+		printf("PCI: CPC0_STRP1[PAE] not set.\n");
+		return 0;
+	}
 
-    return 1;
+	return 1;
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_PRE_INIT) */
 
 /*************************************************************************
  *  pci_target_init
@@ -241,38 +241,37 @@ int pci_pre_init(struct pci_controller * hose )
  *
  ************************************************************************/
 #if defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT)
-void pci_target_init(struct pci_controller * hose )
+void pci_target_init(struct pci_controller *hose)
 {
 	DECLARE_GLOBAL_DATA_PTR;
 
 	/*--------------------------------------------------------------------------+
 	 * Disable everything
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0SA, 0 ); /* disable */
-	out32r( PCIX0_PIM1SA, 0 ); /* disable */
-	out32r( PCIX0_PIM2SA, 0 ); /* disable */
-	out32r( PCIX0_EROMBA, 0 ); /* disable expansion rom */
+	out32r(PCIX0_PIM0SA, 0);	/* disable */
+	out32r(PCIX0_PIM1SA, 0);	/* disable */
+	out32r(PCIX0_PIM2SA, 0);	/* disable */
+	out32r(PCIX0_EROMBA, 0);	/* disable expansion rom */
 
 	/*--------------------------------------------------------------------------+
 	 * Map all of SDRAM to PCI address 0x0000_0000. Note that the 440 strapping
      * options to not support sizes such as 128/256 MB.
 	 *--------------------------------------------------------------------------*/
-	out32r( PCIX0_PIM0LAL, CFG_SDRAM_BASE );
-	out32r( PCIX0_PIM0LAH, 0 );
-	out32r( PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1 );
+	out32r(PCIX0_PIM0LAL, CFG_SDRAM_BASE);
+	out32r(PCIX0_PIM0LAH, 0);
+	out32r(PCIX0_PIM0SA, ~(gd->ram_size - 1) | 1);
 
-	out32r( PCIX0_BAR0, 0 );
+	out32r(PCIX0_BAR0, 0);
 
 	/*--------------------------------------------------------------------------+
 	 * Program the board's subsystem id/vendor id
 	 *--------------------------------------------------------------------------*/
-    out16r( PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID );
-    out16r( PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID );
+	out16r(PCIX0_SBSYSVID, CFG_PCI_SUBSYS_VENDORID);
+	out16r(PCIX0_SBSYSID, CFG_PCI_SUBSYS_DEVICEID);
 
-	out16r( PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY );
+	out16r(PCIX0_CMD, in16r(PCIX0_CMD) | PCI_COMMAND_MEMORY);
 }
-#endif /* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
-
+#endif				/* defined(CONFIG_PCI) && defined(CFG_PCI_TARGET_INIT) */
 
 /*************************************************************************
  *  is_pci_host
@@ -292,7 +291,7 @@ void pci_target_init(struct pci_controller * hose )
 #if defined(CONFIG_PCI)
 int is_pci_host(struct pci_controller *hose)
 {
-    /* The ebony board is always configured as host. */
-    return(1);
+	/* The ebony board is always configured as host. */
+	return (1);
 }
-#endif /* defined(CONFIG_PCI) */
+#endif				/* defined(CONFIG_PCI) */
diff --git a/board/amcc/ebony/flash.c b/board/amcc/ebony/flash.c
new file mode 100644
index 0000000000..e8fbbc493e
--- /dev/null
+++ b/board/amcc/ebony/flash.c
@@ -0,0 +1,140 @@
+/*
+ * (C) Copyright 2002
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+#define     BOOT_SMALL_FLASH        32	/* 00100000 */
+#define     FLASH_ONBD_N            2	/* 00000010 */
+#define     FLASH_SRAM_SEL          1	/* 00000001 */
+
+#define     BOOT_SMALL_FLASH_VAL    4
+#define     FLASH_ONBD_N_VAL        2
+#define     FLASH_SRAM_SEL_VAL      1
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+	{0xffc00000, 0xffe00000, 0xff880000},	/* 0:000: configuraton 3 */
+	{0xffc00000, 0xffe00000, 0xff800000},	/* 1:001: configuraton 4 */
+	{0xffc00000, 0xffe00000, 0x00000000},	/* 2:010: configuraton 7 */
+	{0xffc00000, 0xffe00000, 0x00000000},	/* 3:011: configuraton 8 */
+	{0xff800000, 0xffa00000, 0xfff80000},	/* 4:100: configuraton 1 */
+	{0xff800000, 0xffa00000, 0xfff00000},	/* 5:101: configuraton 2 */
+	{0xffc00000, 0xffe00000, 0x00000000},	/* 6:110: configuraton 5 */
+	{0xffc00000, 0xffe00000, 0x00000000}	/* 7:111: configuraton 6 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char switch_status;
+	unsigned short index = 0;
+	int i;
+
+	/* read FPGA base register FPGA_REG0 */
+	switch_status = *fpga_base;
+
+	/* check the bitmap of switch status */
+	if (switch_status & BOOT_SMALL_FLASH) {
+		index += BOOT_SMALL_FLASH_VAL;
+	}
+	if (switch_status & FLASH_ONBD_N) {
+		index += FLASH_ONBD_N_VAL;
+	}
+	if (switch_status & FLASH_SRAM_SEL) {
+		index += FLASH_SRAM_SEL_VAL;
+	}
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] = flash_get_size((vu_long *)
+					   flash_addr_table[index][i],
+					   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			       i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[2]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[2]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[2]);
+#endif
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/ebony/init.S b/board/amcc/ebony/init.S
index cc8f8b444e..cc8f8b444e 100644
--- a/board/ebony/init.S
+++ b/board/amcc/ebony/init.S
diff --git a/board/ebony/u-boot.lds b/board/amcc/ebony/u-boot.lds
index 7ea7caf5fd..0ec3fad8c3 100644
--- a/board/ebony/u-boot.lds
+++ b/board/amcc/ebony/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/ebony/init.o	(.text)
+    board/amcc/ebony/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/ocotea/Makefile b/board/amcc/ocotea/Makefile
index af223d2c55..af223d2c55 100644
--- a/board/ocotea/Makefile
+++ b/board/amcc/ocotea/Makefile
diff --git a/board/ocotea/config.mk b/board/amcc/ocotea/config.mk
index 5543a4eabd..5543a4eabd 100644
--- a/board/ocotea/config.mk
+++ b/board/amcc/ocotea/config.mk
diff --git a/board/amcc/ocotea/flash.c b/board/amcc/ocotea/flash.c
new file mode 100644
index 0000000000..5614e20780
--- /dev/null
+++ b/board/amcc/ocotea/flash.c
@@ -0,0 +1,150 @@
+/*
+ * (C) Copyright 2004-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
+ * Add support for Am29F016D and dynamic switch setting.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+#define     BOOT_SMALL_FLASH        0x40	/* 01000000 */
+#define     FLASH_ONBD_N            2	/* 00000010 */
+#define     FLASH_SRAM_SEL          1	/* 00000001 */
+#define     FLASH_ONBD_N            2	/* 00000010 */
+#define     FLASH_SRAM_SEL          1	/* 00000001 */
+
+#define     BOOT_SMALL_FLASH_VAL    4
+#define     FLASH_ONBD_N_VAL        2
+#define     FLASH_SRAM_SEL_VAL      1
+
+flash_info_t flash_info[CFG_MAX_FLASH_BANKS];	/* info for FLASH chips        */
+
+static unsigned long flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
+	{0xFF800000, 0xFF880000, 0xFFC00000},	/* 0:000: configuraton 4 */
+	{0xFF900000, 0xFF980000, 0xFFC00000},	/* 1:001: configuraton 3 */
+	{0x00000000, 0x00000000, 0x00000000},	/* 2:010: configuraton 8 */
+	{0x00000000, 0x00000000, 0x00000000},	/* 3:011: configuraton 7 */
+	{0xFFE00000, 0xFFF00000, 0xFF800000},	/* 4:100: configuraton 2 */
+	{0xFFF00000, 0xFFF80000, 0xFF800000},	/* 5:101: configuraton 1 */
+	{0x00000000, 0x00000000, 0x00000000},	/* 6:110: configuraton 6 */
+	{0x00000000, 0x00000000, 0x00000000}	/* 7:111: configuraton 5 */
+};
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static int write_word(flash_info_t * info, ulong dest, ulong data);
+
+/*-----------------------------------------------------------------------
+ */
+
+unsigned long flash_init(void)
+{
+	unsigned long total_b = 0;
+	unsigned long size_b[CFG_MAX_FLASH_BANKS];
+	unsigned char *fpga_base = (unsigned char *)CFG_FPGA_BASE;
+	unsigned char switch_status;
+	unsigned short index = 0;
+	int i;
+
+	/* read FPGA base register FPGA_REG0 */
+	switch_status = *fpga_base;
+
+	/* check the bitmap of switch status */
+	if (switch_status & BOOT_SMALL_FLASH) {
+		index += BOOT_SMALL_FLASH_VAL;
+	}
+	if (switch_status & FLASH_ONBD_N) {
+		index += FLASH_ONBD_N_VAL;
+	}
+	if (switch_status & FLASH_SRAM_SEL) {
+		index += FLASH_SRAM_SEL_VAL;
+	}
+
+	DEBUGF("\n");
+	DEBUGF("FLASH: Index: %d\n", index);
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+		flash_info[i].sector_count = -1;
+		flash_info[i].size = 0;
+
+		/* check whether the address is 0 */
+		if (flash_addr_table[index][i] == 0) {
+			continue;
+		}
+
+		/* call flash_get_size() to initialize sector address */
+		size_b[i] =
+		    flash_get_size((vu_long *) flash_addr_table[index][i],
+				   &flash_info[i]);
+		flash_info[i].size = size_b[i];
+		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
+			printf
+			    ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
+			     i, size_b[i], size_b[i] << 20);
+			flash_info[i].sector_count = -1;
+			flash_info[i].size = 0;
+		}
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[i]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[i]);
+#endif
+
+		total_b += flash_info[i].size;
+	}
+
+	return total_b;
+}
diff --git a/board/ocotea/init.S b/board/amcc/ocotea/init.S
index e33427a108..e33427a108 100644
--- a/board/ocotea/init.S
+++ b/board/amcc/ocotea/init.S
diff --git a/board/ocotea/ocotea.c b/board/amcc/ocotea/ocotea.c
index 1c532a361e..5f436eaeee 100644
--- a/board/ocotea/ocotea.c
+++ b/board/amcc/ocotea/ocotea.c
@@ -1,6 +1,9 @@
 /*
  *  Copyright (C) 2004 PaulReynolds@lhsolutions.com
  *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -184,10 +187,17 @@ int board_early_init_f (void)
 int checkboard (void)
 {
 	sys_info_t sysinfo;
+	unsigned char *s = getenv ("serial#");
 
 	get_sys_info (&sysinfo);
 
-	printf ("Board: IBM 440GX Evaluation Board\n");
+	printf ("Board: Ocotea - AMCC PPC440GX Evaluation Board");
+	if (s != NULL) {
+		puts (", serial# ");
+		puts (s);
+	}
+	putc ('\n');
+
 	printf ("\tVCO: %lu MHz\n", sysinfo.freqVCOMhz / 1000000);
 	printf ("\tCPU: %lu MHz\n", sysinfo.freqProcessor / 1000000);
 	printf ("\tPLB: %lu MHz\n", sysinfo.freqPLB / 1000000);
diff --git a/board/ocotea/ocotea.h b/board/amcc/ocotea/ocotea.h
index 41bd4500d6..41bd4500d6 100644
--- a/board/ocotea/ocotea.h
+++ b/board/amcc/ocotea/ocotea.h
diff --git a/board/ocotea/u-boot.lds b/board/amcc/ocotea/u-boot.lds
index 8a54617142..a9852461e1 100644
--- a/board/ocotea/u-boot.lds
+++ b/board/amcc/ocotea/u-boot.lds
@@ -67,7 +67,7 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/ocotea/init.o	(.text)
+    board/amcc/ocotea/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/walnut405/Makefile b/board/amcc/walnut/Makefile
index 97d6a1e671..f5bda5519a 100644
--- a/board/walnut405/Makefile
+++ b/board/amcc/walnut/Makefile
@@ -26,7 +26,6 @@ include $(TOPDIR)/config.mk
 LIB	= lib$(BOARD).a
 
 OBJS	= $(BOARD).o flash.o
-SOBJS	= init.o
 
 $(LIB):	$(OBJS) $(SOBJS)
 	$(AR) crv $@ $(OBJS)
diff --git a/board/bubinga405ep/config.mk b/board/amcc/walnut/config.mk
index 8426bb38fe..1bdf5e4fcf 100644
--- a/board/bubinga405ep/config.mk
+++ b/board/amcc/walnut/config.mk
@@ -21,9 +21,4 @@
 # MA 02111-1307 USA
 #
 
-#
-# esd ADCIOP boards
-#
-
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+TEXT_BASE = 0xFFFC0000
diff --git a/board/amcc/walnut/flash.c b/board/amcc/walnut/flash.c
new file mode 100644
index 0000000000..056f9b9362
--- /dev/null
+++ b/board/amcc/walnut/flash.c
@@ -0,0 +1,199 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Modified 4/5/2001
+ * Wait for completion of each sector erase command issued
+ * 4/5/2001
+ * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
+ */
+
+#include <common.h>
+#include <ppc4xx.h>
+#include <asm/processor.h>
+
+#undef DEBUG
+#ifdef DEBUG
+#define DEBUGF(x...) printf(x)
+#else
+#define DEBUGF(x...)
+#endif				/* DEBUG */
+
+/*
+ * include common flash code (for amcc boards)
+ */
+#include "../common/flash.c"
+
+/*-----------------------------------------------------------------------
+ * Functions
+ */
+static ulong flash_get_size(vu_long * addr, flash_info_t * info);
+static void flash_get_offsets(ulong base, flash_info_t * info);
+
+unsigned long flash_init(void)
+{
+	unsigned long size_b0, size_b1;
+	int i;
+	uint pbcr;
+	unsigned long base_b0, base_b1;
+
+	/* Init: no FLASHes known */
+	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
+		flash_info[i].flash_id = FLASH_UNKNOWN;
+	}
+
+	/* Static FLASH Bank configuration here - FIXME XXX */
+
+	size_b0 =
+	    flash_get_size((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
+
+	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
+		printf("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
+		       size_b0, size_b0 << 20);
+	}
+
+	/* Only one bank */
+	if (CFG_MAX_FLASH_BANKS == 1) {
+		/* Setup offsets */
+		flash_get_offsets(FLASH_BASE0_PRELIM, &flash_info[0]);
+
+		/* Monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    CFG_MONITOR_BASE,
+				    CFG_MONITOR_BASE + CFG_MONITOR_LEN - 1,
+				    &flash_info[0]);
+#ifdef CFG_ENV_IS_IN_FLASH
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR,
+				    CFG_ENV_ADDR + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+		(void)flash_protect(FLAG_PROTECT_SET, CFG_ENV_ADDR_REDUND,
+				    CFG_ENV_ADDR_REDUND + CFG_ENV_SECT_SIZE - 1,
+				    &flash_info[0]);
+#endif
+
+		size_b1 = 0;
+		flash_info[0].size = size_b0;
+	} else {
+		/* 2 banks */
+		size_b1 =
+		    flash_get_size((vu_long *) FLASH_BASE1_PRELIM,
+				   &flash_info[1]);
+
+		/* Re-do sizing to get full correct info */
+
+		if (size_b1) {
+			mtdcr(ebccfga, pb0cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb0cr);
+			base_b1 = -size_b1;
+			pbcr =
+			    (pbcr & 0x0001ffff) | base_b1 |
+			    (((size_b1 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*          printf("pb1cr = %x\n", pbcr); */
+		}
+
+		if (size_b0) {
+			mtdcr(ebccfga, pb1cr);
+			pbcr = mfdcr(ebccfgd);
+			mtdcr(ebccfga, pb1cr);
+			base_b0 = base_b1 - size_b0;
+			pbcr =
+			    (pbcr & 0x0001ffff) | base_b0 |
+			    (((size_b0 / 1024 / 1024) - 1) << 17);
+			mtdcr(ebccfgd, pbcr);
+			/*            printf("pb0cr = %x\n", pbcr); */
+		}
+
+		size_b0 = flash_get_size((vu_long *) base_b0, &flash_info[0]);
+
+		flash_get_offsets(base_b0, &flash_info[0]);
+
+		/* monitor protection ON by default */
+		(void)flash_protect(FLAG_PROTECT_SET,
+				    base_b0 + size_b0 - monitor_flash_len,
+				    base_b0 + size_b0 - 1, &flash_info[0]);
+
+		if (size_b1) {
+			/* Re-do sizing to get full correct info */
+			size_b1 =
+			    flash_get_size((vu_long *) base_b1, &flash_info[1]);
+
+			flash_get_offsets(base_b1, &flash_info[1]);
+
+			/* monitor protection ON by default */
+			(void)flash_protect(FLAG_PROTECT_SET,
+					    base_b1 + size_b1 -
+					    monitor_flash_len,
+					    base_b1 + size_b1 - 1,
+					    &flash_info[1]);
+			/* monitor protection OFF by default (one is enough) */
+			(void)flash_protect(FLAG_PROTECT_CLEAR,
+					    base_b0 + size_b0 -
+					    monitor_flash_len,
+					    base_b0 + size_b0 - 1,
+					    &flash_info[0]);
+		} else {
+			flash_info[1].flash_id = FLASH_UNKNOWN;
+			flash_info[1].sector_count = -1;
+		}
+
+		flash_info[0].size = size_b0;
+		flash_info[1].size = size_b1;
+	}			/* else 2 banks */
+	return (size_b0 + size_b1);
+}
+
+
+static void flash_get_offsets(ulong base, flash_info_t * info)
+{
+	int i;
+
+	/* set up sector start address table */
+	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
+	    (info->flash_id == FLASH_AM040)) {
+		for (i = 0; i < info->sector_count; i++)
+			info->start[i] = base + (i * 0x00010000);
+	} else {
+		if (info->flash_id & FLASH_BTYPE) {
+			/* set sector offsets for bottom boot block type        */
+			info->start[0] = base + 0x00000000;
+			info->start[1] = base + 0x00004000;
+			info->start[2] = base + 0x00006000;
+			info->start[3] = base + 0x00008000;
+			for (i = 4; i < info->sector_count; i++) {
+				info->start[i] =
+				    base + (i * 0x00010000) - 0x00030000;
+			}
+		} else {
+			/* set sector offsets for top boot block type           */
+			i = info->sector_count - 1;
+			info->start[i--] = base + info->size - 0x00004000;
+			info->start[i--] = base + info->size - 0x00006000;
+			info->start[i--] = base + info->size - 0x00008000;
+			for (; i >= 0; i--) {
+				info->start[i] = base + i * 0x00010000;
+			}
+		}
+	}
+}
diff --git a/board/walnut405/u-boot.lds b/board/amcc/walnut/u-boot.lds
index 7a75f6a28a..7107880887 100644
--- a/board/walnut405/u-boot.lds
+++ b/board/amcc/walnut/u-boot.lds
@@ -62,7 +62,6 @@ SECTIONS
     /* the sector layout of our flash chips!	XXX FIXME XXX	*/
 
     cpu/ppc4xx/start.o	(.text)
-    board/walnut405/init.o	(.text)
     cpu/ppc4xx/kgdb.o	(.text)
     cpu/ppc4xx/traps.o	(.text)
     cpu/ppc4xx/interrupts.o	(.text)
diff --git a/board/amcc/walnut/walnut.c b/board/amcc/walnut/walnut.c
new file mode 100644
index 0000000000..9fca0a60d0
--- /dev/null
+++ b/board/amcc/walnut/walnut.c
@@ -0,0 +1,111 @@
+/*
+ * (C) Copyright 2000-2005
+ * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <asm/processor.h>
+#include <spd_sdram.h>
+
+int board_early_init_f(void)
+{
+	/*-------------------------------------------------------------------------+
+	  | Interrupt controller setup for the Walnut/Sycamore board.
+	  | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
+	  |       IRQ 16    405GP internally generated; active low; level sensitive
+	  |       IRQ 17-24 RESERVED
+	  |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
+	  |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
+	  |       IRQ 27 (EXT IRQ 2) Not Used
+	  |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
+	  |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
+	  |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
+	  |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
+	  | Note for Walnut board:
+	  |       An interrupt taken for the FPGA (IRQ 25) indicates that either
+	  |       the Mouse, Keyboard, IRDA, or External Expansion caused the
+	  |       interrupt. The FPGA must be read to determine which device
+	  |       caused the interrupt. The default setting of the FPGA clears
+	  |
+	  +-------------------------------------------------------------------------*/
+
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+	mtdcr(uicer, 0x00000000);	/* disable all ints */
+	mtdcr(uiccr, 0x00000020);	/* set all but FPGA SMI to be non-critical */
+	mtdcr(uicpr, 0xFFFFFFE0);	/* set int polarities */
+	mtdcr(uictr, 0x10000000);	/* set int trigger levels */
+	mtdcr(uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
+	mtdcr(uicsr, 0xFFFFFFFF);	/* clear all ints */
+
+	/* set UART1 control to select CTS/RTS */
+#define FPGA_BRDC       0xF0300004
+	*(volatile char *)(FPGA_BRDC) |= 0x1;
+
+	return 0;
+}
+
+/*
+ * Check Board Identity:
+ */
+int checkboard(void)
+{
+	unsigned char *s = getenv("serial#");
+	uint pvr = get_pvr();
+
+	if (pvr == PVR_405GPR_RB) {
+		puts("Board: Sycamore - AMCC PPC405GPr Evaluation Board");
+	} else {
+		puts("Board: Walnut - AMCC PPC405GP Evaluation Board");
+	}
+
+	if (s != NULL) {
+		puts(", serial# ");
+		puts(s);
+	}
+	putc('\n');
+
+	return (0);
+}
+
+/*
+ * sdram_init - Dummy implementation for start.S, spd_sdram used on this board!
+ */
+void sdram_init(void)
+{
+	return;
+}
+
+/*
+ * initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
+ * the necessary info for SDRAM controller configuration
+ */
+long int initdram(int board_type)
+{
+	return spd_sdram(0);
+}
+
+int testdram(void)
+{
+	/* TODO: XXX XXX XXX */
+	printf("test: xxx MB - ok\n");
+
+	return (0);
+}
diff --git a/board/bubinga405ep/bubinga405ep.c b/board/bubinga405ep/bubinga405ep.c
deleted file mode 100644
index 0be7965079..0000000000
--- a/board/bubinga405ep/bubinga405ep.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-long int spd_sdram (void);
-
-#include <common.h>
-#include <asm/processor.h>
-
-
-int board_early_init_f (void)
-{
-	mtdcr (uicsr, 0xFFFFFFFF);      /* clear all ints */
-	mtdcr (uicer, 0x00000000);      /* disable all ints */
-	mtdcr (uiccr, 0x00000010);
-	mtdcr (uicpr, 0xFFFF7FF0);      /* set int polarities */
-	mtdcr (uictr, 0x00000010);      /* set int trigger levels */
-	mtdcr (uicsr, 0xFFFFFFFF);      /* clear all ints */
-
-#if 0
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-    /* CS1 */
-	/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb1ap, 0x02815480);
-	mtebc (pb1cr, 0xF0018000);
-
-	p = (unsigned int*)0xEF600708;
-	t = *p;
-	t = t | 0x00000400;
-	*p = t;
-
-	/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb2ap, 0x04815A80);
-	mtebc (pb2cr, 0xF0118000);
-
-	/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb3ap, 0x01815280);
-	mtebc (pb3cr, 0xF0218000);
-
-	/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb7ap, 0x01815280);
-	mtebc (pb7cr, 0xF0318000);
-
-
-	/* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC       0xF0300004
-	*(volatile char *) (FPGA_BRDC) |= 0x1;
-
-#endif
-
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	unsigned char *s = getenv ("serial#");
-
-	puts ("Board: IBM 405EP Eval Board");
-
-	if (s != NULL) {
-		puts (", serial# ");
-		puts (s);
-	}
-	putc ('\n');
-
-	return (0);
-}
-
-
-/* -------------------------------------------------------------------------
-  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-   ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
-	long int ret;
-
-	ret = spd_sdram ();
-	return ret;
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: xxx MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/bubinga405ep/bubinga405ep.h b/board/bubinga405ep/bubinga405ep.h
deleted file mode 100644
index 5fc313a258..0000000000
--- a/board/bubinga405ep/bubinga405ep.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/
diff --git a/board/bubinga405ep/flash.c b/board/bubinga405ep/flash.c
deleted file mode 100644
index 85179d0f2f..0000000000
--- a/board/bubinga405ep/flash.c
+++ /dev/null
@@ -1,737 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0           0x0aa9
-#define ADDR1           0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_BUBINGA405EP
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i = 0; i < CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size ((vu_long *) FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0 << 20);
-	}
-
-	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1) {
-		/* Setup offsets */
-		flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
-		/* Monitor protection ON by default */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      FLASH_BASE0_PRELIM,
-				      FLASH_BASE0_PRELIM + CFG_MONITOR_LEN - 1,
-				      &flash_info[0]);
-		/* Also protect sector containing initial power-up instruction */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
-		size_b1 = 0;
-		flash_info[0].size = size_b0;
-	}
-
-	/* 2 banks */
-	else {
-		size_b1 = flash_get_size ((vu_long *) FLASH_BASE1_PRELIM, &flash_info[1]);
-
-		/* Re-do sizing to get full correct info */
-
-		if (size_b1) {
-			mtdcr (ebccfga, pb0cr);
-			pbcr = mfdcr (ebccfgd);
-			mtdcr (ebccfga, pb0cr);
-			base_b1 = -size_b1;
-			pbcr = (pbcr & 0x0001ffff) | base_b1 |
-				(((size_b1 / 1024 / 1024) - 1) << 17);
-			mtdcr (ebccfgd, pbcr);
-			/*          printf("pb1cr = %x\n", pbcr); */
-		}
-
-		if (size_b0) {
-			mtdcr (ebccfga, pb1cr);
-			pbcr = mfdcr (ebccfgd);
-			mtdcr (ebccfga, pb1cr);
-			base_b0 = base_b1 - size_b0;
-			pbcr = (pbcr & 0x0001ffff) | base_b0 |
-				(((size_b0 / 1024 / 1024) - 1) << 17);
-			mtdcr (ebccfgd, pbcr);
-			/*            printf("pb0cr = %x\n", pbcr); */
-		}
-
-		size_b0 = flash_get_size ((vu_long *) base_b0, &flash_info[0]);
-
-		flash_get_offsets (base_b0, &flash_info[0]);
-
-		/* monitor protection ON by default */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      base_b0 + size_b0 - CFG_MONITOR_LEN,
-				      base_b0 + size_b0 - 1, &flash_info[0]);
-		/* Also protect sector containing initial power-up instruction */
-		/* (flash_protect() checks address range - other call ignored) */
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      0xFFFFFFFC, 0xFFFFFFFF, &flash_info[0]);
-		(void) flash_protect (FLAG_PROTECT_SET,
-				      0xFFFFFFFC, 0xFFFFFFFF, &flash_info[1]);
-
-		if (size_b1) {
-			/* Re-do sizing to get full correct info */
-			size_b1 = flash_get_size ((vu_long *) base_b1, &flash_info[1]);
-
-			flash_get_offsets (base_b1, &flash_info[1]);
-
-			/* monitor protection ON by default */
-			(void) flash_protect (FLAG_PROTECT_SET,
-					      base_b1 + size_b1 - CFG_MONITOR_LEN,
-					      base_b1 + size_b1 - 1,
-					      &flash_info[1]);
-			/* monitor protection OFF by default (one is enough) */
-			(void) flash_protect (FLAG_PROTECT_CLEAR,
-					      base_b0 + size_b0 - CFG_MONITOR_LEN,
-					      base_b0 + size_b0 - 1,
-					      &flash_info[0]);
-		} else {
-			flash_info[1].flash_id = FLASH_UNKNOWN;
-			flash_info[1].sector_count = -1;
-		}
-
-		flash_info[0].size = size_b0;
-		flash_info[1].size = size_b1;
-	}			/* else 2 banks */
-	return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t * info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id == FLASH_AM040)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info (flash_info_t * info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-				break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i = 0; i < info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count - 1))
-			size = info->start[i + 1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *) info->start[i];
-		size = size >> 2;	/* divide by 4 for longword access */
-		for (k = 0; k < size; k++) {
-			if (*flash++ != 0xffffffff) {
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-#if 0				/* test-only */
-		printf (" %08lX%s",
-			info->start[i], info->protect[i] ? " (RO)" : "     "
-#else
-		printf (" %08lX%s%s",
-			info->start[i],
-			erased ? " E" : "  ", info->protect[i] ? "RO " : "   "
-#endif
-			);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long * addr, flash_info_t * info)
-{
-	short i;
-	FLASH_WORD_SIZE value;
-	ulong base = (ulong) addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-	addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-	addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00900090;
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[2];
-#else
-	value = addr2[0];
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FLASH_WORD_SIZE) FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (FLASH_WORD_SIZE) SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);	/* no or unknown flash  */
-	}
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[0];	/* device ID            */
-	/*        printf("\ndev_code=%x\n", value); */
-#else
-	value = addr2[1];	/* device ID            */
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE) AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000;	/* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE) AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB            */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;		/* => 0.5 MB            */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-#if 0				/* enable when device IDs are available */
-	case (FLASH_WORD_SIZE) AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-
-	case (FLASH_WORD_SIZE) AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;		/* => 4 MB              */
-#endif
-	case (FLASH_WORD_SIZE) SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 16;
-		info->size = 0x00100000;
-		break;		/* => 1 MB              */
-
-	case (FLASH_WORD_SIZE) SST_ID_xF160A:
-		info->flash_id += FLASH_SST160A;
-		info->sector_count = 32;
-		info->size = 0x00200000;
-		break;		/* => 2 MB              */
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);	/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id == FLASH_AM040)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type        */
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type           */
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-		info->protect[i] = addr2[4] & 1;
-#else
-		addr2 = (volatile FLASH_WORD_SIZE *) (info->start[i]);
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-			info->protect[i] = 0;
-		else
-			info->protect[i] = addr2[2] & 1;
-#endif
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-#if 0				/* test-only */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile unsigned char *) info->start[0];
-		addr2[ADDR0] = 0xAA;
-		addr2[ADDR1] = 0x55;
-		addr2[ADDR0] = 0xF0;	/* reset bank */
-#else
-		addr2 = (FLASH_WORD_SIZE *) info->start[0];
-		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-#endif
-#else  /* test-only */
-		addr2 = (FLASH_WORD_SIZE *) info->start[0];
-		*addr2 = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-#endif /* test-only */
-	}
-
-	return (info->size);
-}
-
-int wait_for_DQ7 (flash_info_t * info, int sect)
-{
-	ulong start, now, last;
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[sect]);
-
-	start = get_timer (0);
-	last = 0;
-	while ((addr[0] & (FLASH_WORD_SIZE) 0x00800080) != (FLASH_WORD_SIZE) 0x00800080) {
-		if ((now = get_timer (start)) > CFG_FLASH_ERASE_TOUT) {
-			printf ("Timeout\n");
-			return -1;
-		}
-		/* show that we're waiting */
-		if ((now - last) > 1000) {	/* every second */
-			putc ('.');
-			last = now;
-		}
-	}
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t * info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect = s_first; sect <= s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n", prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts ();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect <= s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-			addr2 = (FLASH_WORD_SIZE *) (info->start[sect]);
-			printf ("Erasing sector %p\n", addr2);	/* CLH */
-
-			if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00500050;	/* block erase */
-				for (i = 0; i < 50; i++)
-					udelay (1000);	/* wait 1 ms */
-			} else {
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00800080;
-				addr[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[0] = (FLASH_WORD_SIZE) 0x00300030;	/* sector erase */
-			}
-			l_sect = sect;
-			/*
-			 * Wait for each sector to complete, it's more
-			 * reliable.  According to AMD Spec, you must
-			 * issue all erase commands within a specified
-			 * timeout.  This has been seen to fail, especially
-			 * if printf()s are included (for debug)!!
-			 */
-			wait_for_DQ7 (info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts ();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-#if 0
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-	wait_for_DQ7 (info, l_sect);
-
-      DONE:
-#endif
-	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *) info->start[0];
-	addr[0] = (FLASH_WORD_SIZE) 0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i = 0, cp = wp; i < l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-		for (; i < 4 && cnt > 0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt == 0 && i < 4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *) cp);
-		}
-
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i = 0; i < 4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word (info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i = 0, cp = wp; i < 4 && cnt > 0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i < 4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *) cp);
-	}
-
-	return (write_word (info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
-	     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts ();
-
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/bubinga405ep/init.S b/board/bubinga405ep/init.S
deleted file mode 100644
index e47852595f..0000000000
--- a/board/bubinga405ep/init.S
+++ /dev/null
@@ -1,55 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/*       This source code has been made available to you by IBM on an AS-IS */
-/*       basis.  Anyone receiving this source is licensed under IBM */
-/*       copyrights to use it in any way he or she deems fit, including */
-/*       copying it, modifying it, compiling it, and redistributing it either */
-/*       with or without modifications.  No license under IBM patents or */
-/*       patent applications is to be implied by the copyright license. */
-/* */
-/*       Any user of this software should understand that IBM cannot provide */
-/*       technical support for this software and will not be responsible for */
-/*       any consequences resulting from the use of this software. */
-/* */
-/*       Any person who transfers this source code or any derivative work */
-/*       must include the IBM copyright notice, this paragraph, and the */
-/*       preceding two paragraphs in the transferred software. */
-/* */
-/*       COPYRIGHT   I B M   CORPORATION 1995 */
-/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function:     ext_bus_cntlr_init */
-/* Description:  Initializes the External Bus Controller for the external */
-/*		peripherals. IMPORTANT: For pass1 this code must run from */
-/*		cache since you can not reliably change a peripheral banks */
-/*		timing register (pbxap) while running code from that bank. */
-/*		For ex., since we are running from ROM on bank 0, we can NOT */
-/*		execute the code that modifies bank 0 timings from ROM, so */
-/*		we run it from cache. */
-/*	Bank 0 - Flash and SRAM */
-/*	Bank 1 - NVRAM/RTC */
-/*	Bank 2 - Keyboard/Mouse controller */
-/*	Bank 3 - IR controller */
-/*	Bank 4 - not used */
-/*	Bank 5 - not used */
-/*	Bank 6 - not used */
-/*	Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-/*----------------------------------------------------------------------------- */
-/* Function:     sdram_init */
-/* Description:  Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
-	.globl  sdram_init
-sdram_init:
-	blr
diff --git a/board/bubinga405ep/u-boot.lds.debug b/board/bubinga405ep/u-boot.lds.debug
deleted file mode 100644
index df50b7d198..0000000000
--- a/board/bubinga405ep/u-boot.lds.debug
+++ /dev/null
@@ -1,146 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-/*
-    cpu/ppc4xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-*/
-    cpu/ppc4xx/start.o	(.text)
-    board/bubinga405ep/init.o	(.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/405gp_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/ebony/ebony.h b/board/ebony/ebony.h
deleted file mode 100644
index 73d489ea59..0000000000
--- a/board/ebony/ebony.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/
diff --git a/board/ebony/flash.c b/board/ebony/flash.c
deleted file mode 100644
index d8b47571d4..0000000000
--- a/board/ebony/flash.c
+++ /dev/null
@@ -1,743 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * (C) Copyright 2002 Jun Gu <jung@artesyncp.com>
- * Add support for Am29F016D and dynamic switch setting.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-
-#undef DEBUG
-#ifdef DEBUG
-#define DEBUGF(x...) printf(x)
-#else
-#define DEBUGF(x...)
-#endif /* DEBUG */
-
-#define     BOOT_SMALL_FLASH        32              /* 00100000 */
-#define     FLASH_ONBD_N            2               /* 00000010 */
-#define     FLASH_SRAM_SEL          1               /* 00000001 */
-
-#define     BOOT_SMALL_FLASH_VAL    4
-#define     FLASH_ONBD_N_VAL        2
-#define     FLASH_SRAM_SEL_VAL      1
-
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-static  unsigned    long    flash_addr_table[8][CFG_MAX_FLASH_BANKS] = {
-	{0xffc00000, 0xffe00000, 0xff880000},   /* 0:000: configuraton 3 */
-	{0xffc00000, 0xffe00000, 0xff800000},   /* 1:001: configuraton 4 */
-	{0xffc00000, 0xffe00000, 0x00000000},   /* 2:010: configuraton 7 */
-	{0xffc00000, 0xffe00000, 0x00000000},   /* 3:011: configuraton 8 */
-	{0xff800000, 0xffa00000, 0xfff80000},   /* 4:100: configuraton 1 */
-	{0xff800000, 0xffa00000, 0xfff00000},   /* 5:101: configuraton 2 */
-	{0xffc00000, 0xffe00000, 0x00000000},   /* 6:110: configuraton 5 */
-	{0xffc00000, 0xffe00000, 0x00000000}    /* 7:111: configuraton 6 */
-};
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info);
-#endif
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0           0x0aa9
-#define ADDR1           0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_EBONY
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void) {
-	unsigned long total_b = 0;
-	unsigned long size_b[CFG_MAX_FLASH_BANKS];
-	unsigned char * fpga_base = (unsigned char *)CFG_FPGA_BASE;
-	unsigned char switch_status;
-	unsigned short index = 0;
-	int i;
-
-
-	/* read FPGA base register FPGA_REG0 */
-	switch_status = *fpga_base;
-
-	/* check the bitmap of switch status */
-	if (switch_status & BOOT_SMALL_FLASH) {
-		index += BOOT_SMALL_FLASH_VAL;
-	}
-	if (switch_status & FLASH_ONBD_N) {
-		index += FLASH_ONBD_N_VAL;
-	}
-	if (switch_status & FLASH_SRAM_SEL) {
-		index += FLASH_SRAM_SEL_VAL;
-	}
-
-    DEBUGF("\n");
-	DEBUGF("FLASH: Index: %d\n", index);
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-		flash_info[i].sector_count = -1;
-		flash_info[i].size = 0;
-
-		/* check whether the address is 0 */
-		if (flash_addr_table[index][i] == 0) {
-			continue;
-		}
-
-		/* call flash_get_size() to initialize sector address */
-		size_b[i] = flash_get_size(
-			(vu_long *)flash_addr_table[index][i], &flash_info[i]);
-		flash_info[i].size = size_b[i];
-		if (flash_info[i].flash_id == FLASH_UNKNOWN) {
-			printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n",
-				i, size_b[i], size_b[i]<<20);
-			flash_info[i].sector_count = -1;
-			flash_info[i].size = 0;
-		}
-
-		total_b += flash_info[i].size;
-	}
-
-	return total_b;
-}
-
-
-/*-----------------------------------------------------------------------
- */
-#if 0
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id  == FLASH_AM040) ||
-	    (info->flash_id  == FLASH_AMD016)) {
-		for (i = 0; i < info->sector_count; i++)
-			info->start[i] = base + (i * 0x00010000);
-	} else {
-		if (info->flash_id & FLASH_BTYPE) {
-			/* set sector offsets for bottom boot block type	*/
-			info->start[0] = base + 0x00000000;
-			info->start[1] = base + 0x00004000;
-			info->start[2] = base + 0x00006000;
-			info->start[3] = base + 0x00008000;
-			for (i = 4; i < info->sector_count; i++) {
-				info->start[i] = base + (i * 0x00010000) - 0x00030000;
-			}
-		} else {
-			/* set sector offsets for top boot block type		*/
-			i = info->sector_count - 1;
-			info->start[i--] = base + info->size - 0x00004000;
-			info->start[i--] = base + info->size - 0x00006000;
-			info->start[i--] = base + info->size - 0x00008000;
-			for (; i >= 0; i--) {
-				info->start[i] = base + i * 0x00010000;
-			}
-		}
-	}
-}
-#endif /* 0 */
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AMD016:	printf ("AM29F016D (16 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-		break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-		break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-		break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-		break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-		break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-		break;
-	default:		printf ("Unknown Chip Type\n");
-		break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count-1))
-			size = info->start[i+1] - info->start[i];
-		else
-			size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;        /* divide by 4 for longword access */
-		for (k=0; k<size; k++)
-		{
-			if (*flash++ != 0xffffffff)
-			{
-				erased = 0;
-				break;
-			}
-		}
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-			printf (" %08lX%s%s",
-				info->start[i],
-				erased ? " E" : "  ",
-				info->protect[i] ? "RO " : "   "
-				);
-			}
-		printf ("\n");
-		return;
-	}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-	static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-		{
-			short i;
-			FLASH_WORD_SIZE value;
-			ulong base = (ulong)addr;
-			volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
-	    DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr );
-
-			/* Write auto select command: read Manufacturer ID */
-	    udelay(10000);
-			addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-	    udelay(1000);
-			addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-	    udelay(1000);
-			addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-	    udelay(1000);
-
-#ifdef CONFIG_ADCIOP
-			value = addr2[2];
-#else
-			value = addr2[0];
-#endif
-
-			DEBUGF("FLASH MANUFACT: %x\n", value);
-
-			switch (value) {
-			case (FLASH_WORD_SIZE)AMD_MANUFACT:
-				info->flash_id = FLASH_MAN_AMD;
-				break;
-			case (FLASH_WORD_SIZE)FUJ_MANUFACT:
-				info->flash_id = FLASH_MAN_FUJ;
-				break;
-			case (FLASH_WORD_SIZE)SST_MANUFACT:
-				info->flash_id = FLASH_MAN_SST;
-				break;
-			case (FLASH_WORD_SIZE)STM_MANUFACT:
-				info->flash_id = FLASH_MAN_STM;
-				break;
-			default:
-				info->flash_id = FLASH_UNKNOWN;
-				info->sector_count = 0;
-				info->size = 0;
-				return (0);			/* no or unknown flash	*/
-			}
-
-#ifdef CONFIG_ADCIOP
-			value = addr2[0];			/* device ID		*/
-			debug ("\ndev_code=%x\n", value);
-#else
-			value = addr2[1];			/* device ID		*/
-#endif
-
-			DEBUGF("\nFLASH DEVICEID: %x\n", value);
-
-			switch (value) {
-			case (FLASH_WORD_SIZE)AMD_ID_F016D:
-				info->flash_id += FLASH_AMD016;
-				info->sector_count = 32;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-			case (FLASH_WORD_SIZE)STM_ID_F040B:
-				info->flash_id += FLASH_AM040;
-				info->sector_count = 8;
-				info->size = 0x0080000; /* => 512 ko */
-				break;
-			case (FLASH_WORD_SIZE)AMD_ID_F040B:
-				info->flash_id += FLASH_AM040;
-				info->sector_count = 8;
-				info->size = 0x0080000; /* => 512 ko */
-				break;
-			case (FLASH_WORD_SIZE)AMD_ID_LV400T:
-				info->flash_id += FLASH_AM400T;
-				info->sector_count = 11;
-				info->size = 0x00080000;
-				break;				/* => 0.5 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV400B:
-				info->flash_id += FLASH_AM400B;
-				info->sector_count = 11;
-				info->size = 0x00080000;
-				break;				/* => 0.5 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV800T:
-				info->flash_id += FLASH_AM800T;
-				info->sector_count = 19;
-				info->size = 0x00100000;
-				break;				/* => 1 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV800B:
-				info->flash_id += FLASH_AM800B;
-				info->sector_count = 19;
-				info->size = 0x00100000;
-				break;				/* => 1 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV160T:
-				info->flash_id += FLASH_AM160T;
-				info->sector_count = 35;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV160B:
-				info->flash_id += FLASH_AM160B;
-				info->sector_count = 35;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-#if 0	/* enable when device IDs are available */
-			case (FLASH_WORD_SIZE)AMD_ID_LV320T:
-				info->flash_id += FLASH_AM320T;
-				info->sector_count = 67;
-				info->size = 0x00400000;
-				break;				/* => 4 MB		*/
-
-			case (FLASH_WORD_SIZE)AMD_ID_LV320B:
-				info->flash_id += FLASH_AM320B;
-				info->sector_count = 67;
-				info->size = 0x00400000;
-				break;				/* => 4 MB		*/
-#endif
-			case (FLASH_WORD_SIZE)SST_ID_xF800A:
-				info->flash_id += FLASH_SST800A;
-				info->sector_count = 16;
-				info->size = 0x00100000;
-				break;				/* => 1 MB		*/
-
-			case (FLASH_WORD_SIZE)SST_ID_xF160A:
-				info->flash_id += FLASH_SST160A;
-				info->sector_count = 32;
-				info->size = 0x00200000;
-				break;				/* => 2 MB		*/
-
-			default:
-				info->flash_id = FLASH_UNKNOWN;
-				return (0);			/* => no or unknown flash */
-
-			}
-
-			/* set up sector start address table */
-			if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-			    (info->flash_id  == FLASH_AM040) ||
-			    (info->flash_id  == FLASH_AMD016)) {
-				for (i = 0; i < info->sector_count; i++)
-					info->start[i] = base + (i * 0x00010000);
-			} else {
-				if (info->flash_id & FLASH_BTYPE) {
-					/* set sector offsets for bottom boot block type	*/
-					info->start[0] = base + 0x00000000;
-					info->start[1] = base + 0x00004000;
-					info->start[2] = base + 0x00006000;
-					info->start[3] = base + 0x00008000;
-					for (i = 4; i < info->sector_count; i++) {
-						info->start[i] = base + (i * 0x00010000) - 0x00030000;
-					}
-				} else {
-					/* set sector offsets for top boot block type		*/
-					i = info->sector_count - 1;
-					info->start[i--] = base + info->size - 0x00004000;
-					info->start[i--] = base + info->size - 0x00006000;
-					info->start[i--] = base + info->size - 0x00008000;
-					for (; i >= 0; i--) {
-						info->start[i] = base + i * 0x00010000;
-					}
-				}
-			}
-
-			/* check for protected sectors */
-			for (i = 0; i < info->sector_count; i++) {
-				/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-				/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-				addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-				info->protect[i] = addr2[4] & 1;
-#else
-				addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-				if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-					info->protect[i] = 0;
-				else
-					info->protect[i] = addr2[2] & 1;
-#endif
-			}
-
-			/*
-			 * Prevent writes to uninitialized FLASH.
-			 */
-			if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
-				addr2 = (volatile unsigned char *)info->start[0];
-				addr2[ADDR0] = 0xAA;
-				addr2[ADDR1] = 0x55;
-				addr2[ADDR0] = 0xF0;  /* reset bank */
-#else
-				addr2 = (FLASH_WORD_SIZE *)info->start[0];
-				*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif
-#else /* test-only */
-				addr2 = (FLASH_WORD_SIZE *)info->start[0];
-				*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif /* test-only */
-			}
-
-			return (info->size);
-		}
-
-	int wait_for_DQ7(flash_info_t *info, int sect)
-		{
-			ulong start, now, last;
-			volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
-			start = get_timer (0);
-			last  = start;
-			while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-				if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-					printf ("Timeout\n");
-					return -1;
-				}
-				/* show that we're waiting */
-				if ((now - last) > 1000) {  /* every second */
-					putc ('.');
-					last = now;
-				}
-			}
-			return 0;
-		}
-
-/*-----------------------------------------------------------------------
- */
-
-	int	flash_erase (flash_info_t *info, int s_first, int s_last)
-		{
-			volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
-			volatile FLASH_WORD_SIZE *addr2;
-			int flag, prot, sect, l_sect;
-			int i;
-
-			if ((s_first < 0) || (s_first > s_last)) {
-				if (info->flash_id == FLASH_UNKNOWN) {
-					printf ("- missing\n");
-				} else {
-					printf ("- no sectors to erase\n");
-				}
-				return 1;
-			}
-
-			if (info->flash_id == FLASH_UNKNOWN) {
-				printf ("Can't erase unknown flash type - aborted\n");
-				return 1;
-			}
-
-			prot = 0;
-			for (sect=s_first; sect<=s_last; ++sect) {
-				if (info->protect[sect]) {
-					prot++;
-				}
-			}
-
-			if (prot) {
-				printf ("- Warning: %d protected sectors will not be erased!\n",
-					prot);
-			} else {
-				printf ("\n");
-			}
-
-			l_sect = -1;
-
-			/* Disable interrupts which might cause a timeout here */
-			flag = disable_interrupts();
-
-			/* Start erase on unprotected sectors */
-			for (sect = s_first; sect<=s_last; sect++) {
-				if (info->protect[sect] == 0) {	/* not protected */
-					addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
-					printf("Erasing sector %p\n", addr2);
-
-					if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
-						for (i=0; i<50; i++)
-							udelay(1000);  /* wait 1 ms */
-					} else {
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-						addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-						addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-						addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-					}
-					l_sect = sect;
-					/*
-					 * Wait for each sector to complete, it's more
-					 * reliable.  According to AMD Spec, you must
-					 * issue all erase commands within a specified
-					 * timeout.  This has been seen to fail, especially
-					 * if printf()s are included (for debug)!!
-					 */
-					wait_for_DQ7(info, sect);
-				}
-			}
-
-			/* re-enable interrupts if necessary */
-			if (flag)
-				enable_interrupts();
-
-			/* wait at least 80us - let's wait 1 ms */
-			udelay (1000);
-
-#if 0
-			/*
-			 * We wait for the last triggered sector
-			 */
-			if (l_sect < 0)
-				goto DONE;
-			wait_for_DQ7(info, l_sect);
-
-		DONE:
-#endif
-			/* reset to read mode */
-			addr = (FLASH_WORD_SIZE *)info->start[0];
-			addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-
-			printf (" done\n");
-			return 0;
-		}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-	int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-		{
-			ulong cp, wp, data;
-			int i, l, rc;
-
-			wp = (addr & ~3);	/* get lower word aligned address */
-
-			/*
-			 * handle unaligned start bytes
-			 */
-			if ((l = addr - wp) != 0) {
-				data = 0;
-				for (i=0, cp=wp; i<l; ++i, ++cp) {
-					data = (data << 8) | (*(uchar *)cp);
-				}
-				for (; i<4 && cnt>0; ++i) {
-					data = (data << 8) | *src++;
-					--cnt;
-					++cp;
-				}
-				for (; cnt==0 && i<4; ++i, ++cp) {
-					data = (data << 8) | (*(uchar *)cp);
-				}
-
-				if ((rc = write_word(info, wp, data)) != 0) {
-					return (rc);
-				}
-				wp += 4;
-			}
-
-			/*
-			 * handle word aligned part
-			 */
-			while (cnt >= 4) {
-				data = 0;
-				for (i=0; i<4; ++i) {
-					data = (data << 8) | *src++;
-				}
-				if ((rc = write_word(info, wp, data)) != 0) {
-					return (rc);
-				}
-				wp  += 4;
-				cnt -= 4;
-			}
-
-			if (cnt == 0) {
-				return (0);
-			}
-
-			/*
-			 * handle unaligned tail bytes
-			 */
-			data = 0;
-			for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-				data = (data << 8) | *src++;
-				--cnt;
-			}
-			for (; i<4; ++i, ++cp) {
-				data = (data << 8) | (*(uchar *)cp);
-			}
-
-			return (write_word(info, wp, data));
-		}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-	static int write_word (flash_info_t * info, ulong dest, ulong data)
-		{
-			volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-			volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-			volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-			ulong start;
-			int i;
-
-			/* Check if Flash is (sufficiently) erased */
-			if ((*((volatile FLASH_WORD_SIZE *) dest) &
-			     (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-				return (2);
-			}
-
-			for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-				int flag;
-
-				/* Disable interrupts which might cause a timeout here */
-				flag = disable_interrupts ();
-
-				addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-				addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-				addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-				dest2[i] = data2[i];
-
-				/* re-enable interrupts if necessary */
-				if (flag)
-					enable_interrupts ();
-
-				/* data polling for D7 */
-				start = get_timer (0);
-				while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-				       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-					if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-						return (1);
-					}
-				}
-			}
-
-			return (0);
-		}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/ebony/u-boot.lds.debug b/board/ebony/u-boot.lds.debug
deleted file mode 100644
index af497b17ab..0000000000
--- a/board/ebony/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2002
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    ppc/vsprintf.o	(.text)
-    ppc/crc32.o		(.text)
-    ppc/extable.o	(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/ocotea/u-boot.lds.debug b/board/ocotea/u-boot.lds.debug
deleted file mode 100644
index 41534de2be..0000000000
--- a/board/ocotea/u-boot.lds.debug
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * (C) Copyright 2002-2004
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    cpu/ppc4xx/start.o	(.text)
-    board/ocotea/init.o (.text)
-    cpu/ppc4xx/kgdb.o	(.text)
-    cpu/ppc4xx/traps.o	(.text)
-    cpu/ppc4xx/interrupts.o	(.text)
-    cpu/ppc4xx/serial.o	(.text)
-    cpu/ppc4xx/cpu_init.o	(.text)
-    cpu/ppc4xx/speed.o	(.text)
-    cpu/ppc4xx/440gx_enet.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-    lib_generic/zlib.o		(.text)
-
-/*    common/environment.o(.text) */
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-    *(.rodata.str1.4)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(256);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(256);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/walnut405/flash.c b/board/walnut405/flash.c
deleted file mode 100644
index 462c09eb6c..0000000000
--- a/board/walnut405/flash.c
+++ /dev/null
@@ -1,729 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * Modified 4/5/2001
- * Wait for completion of each sector erase command issued
- * 4/5/2001
- * Chris Hallinan - DS4.COM, Inc. - clh@net1plus.com
- */
-
-#include <common.h>
-#include <ppc4xx.h>
-#include <asm/processor.h>
-
-flash_info_t	flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips	*/
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info);
-static int write_word (flash_info_t *info, ulong dest, ulong data);
-static void flash_get_offsets (ulong base, flash_info_t *info);
-
-#ifdef CONFIG_ADCIOP
-#define ADDR0           0x0aa9
-#define ADDR1           0x0556
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-#ifdef CONFIG_CPCI405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned short
-#endif
-
-#ifdef CONFIG_WALNUT405
-#define ADDR0           0x5555
-#define ADDR1           0x2aaa
-#define FLASH_WORD_SIZE unsigned char
-#endif
-
-/*-----------------------------------------------------------------------
- */
-
-unsigned long flash_init (void)
-{
-	unsigned long size_b0, size_b1;
-	int i;
-	uint pbcr;
-	unsigned long base_b0, base_b1;
-
-	/* Init: no FLASHes known */
-	for (i=0; i<CFG_MAX_FLASH_BANKS; ++i) {
-		flash_info[i].flash_id = FLASH_UNKNOWN;
-	}
-
-	/* Static FLASH Bank configuration here - FIXME XXX */
-
-	size_b0 = flash_get_size((vu_long *)FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	if (flash_info[0].flash_id == FLASH_UNKNOWN) {
-		printf ("## Unknown FLASH on Bank 0 - Size = 0x%08lx = %ld MB\n",
-			size_b0, size_b0<<20);
-	}
-
-	/* Only one bank */
-	if (CFG_MAX_FLASH_BANKS == 1)
-	  {
-	    /* Setup offsets */
-	    flash_get_offsets (FLASH_BASE0_PRELIM, &flash_info[0]);
-
-	    /* Monitor protection ON by default */
-	    (void)flash_protect(FLAG_PROTECT_SET,
-				FLASH_BASE0_PRELIM,
-				FLASH_BASE0_PRELIM+monitor_flash_len-1,
-				&flash_info[0]);
-	    size_b1 = 0 ;
-	    flash_info[0].size = size_b0;
-	  }
-
-	/* 2 banks */
-	else
-	  {
-	    size_b1 = flash_get_size((vu_long *)FLASH_BASE1_PRELIM, &flash_info[1]);
-
-	    /* Re-do sizing to get full correct info */
-
-	    if (size_b1)
-	      {
-		mtdcr(ebccfga, pb0cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb0cr);
-		base_b1 = -size_b1;
-		pbcr = (pbcr & 0x0001ffff) | base_b1 | (((size_b1/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
-		/*          printf("pb1cr = %x\n", pbcr); */
-	      }
-
-	    if (size_b0)
-	      {
-		mtdcr(ebccfga, pb1cr);
-		pbcr = mfdcr(ebccfgd);
-		mtdcr(ebccfga, pb1cr);
-		base_b0 = base_b1 - size_b0;
-		pbcr = (pbcr & 0x0001ffff) | base_b0 | (((size_b0/1024/1024)-1)<<17);
-		mtdcr(ebccfgd, pbcr);
-		/*            printf("pb0cr = %x\n", pbcr); */
-	      }
-
-	    size_b0 = flash_get_size((vu_long *)base_b0, &flash_info[0]);
-
-	    flash_get_offsets (base_b0, &flash_info[0]);
-
-	    /* monitor protection ON by default */
-	    (void)flash_protect(FLAG_PROTECT_SET,
-				base_b0+size_b0-monitor_flash_len,
-				base_b0+size_b0-1,
-				&flash_info[0]);
-
-	    if (size_b1) {
-	      /* Re-do sizing to get full correct info */
-	      size_b1 = flash_get_size((vu_long *)base_b1, &flash_info[1]);
-
-	      flash_get_offsets (base_b1, &flash_info[1]);
-
-	      /* monitor protection ON by default */
-	      (void)flash_protect(FLAG_PROTECT_SET,
-				  base_b1+size_b1-monitor_flash_len,
-				  base_b1+size_b1-1,
-				  &flash_info[1]);
-	      /* monitor protection OFF by default (one is enough) */
-	      (void)flash_protect(FLAG_PROTECT_CLEAR,
-				  base_b0+size_b0-monitor_flash_len,
-				  base_b0+size_b0-1,
-				  &flash_info[0]);
-	    } else {
-	      flash_info[1].flash_id = FLASH_UNKNOWN;
-	      flash_info[1].sector_count = -1;
-	    }
-
-	    flash_info[0].size = size_b0;
-	    flash_info[1].size = size_b1;
-	  }/* else 2 banks */
-	return (size_b0 + size_b1);
-}
-
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
-	int i;
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id  == FLASH_AM040)){
-	    for (i = 0; i < info->sector_count; i++)
-		info->start[i] = base + (i * 0x00010000);
-	} else {
-	    if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	    } else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	    }
-	}
-}
-
-/*-----------------------------------------------------------------------
- */
-void flash_print_info  (flash_info_t *info)
-{
-	int i;
-	int k;
-	int size;
-	int erased;
-	volatile unsigned long *flash;
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("missing or unknown FLASH type\n");
-		return;
-	}
-
-	switch (info->flash_id & FLASH_VENDMASK) {
-	case FLASH_MAN_AMD:	printf ("AMD ");		break;
-	case FLASH_MAN_FUJ:	printf ("FUJITSU ");		break;
-	case FLASH_MAN_SST:	printf ("SST ");		break;
-	default:		printf ("Unknown Vendor ");	break;
-	}
-
-	switch (info->flash_id & FLASH_TYPEMASK) {
-	case FLASH_AM040:	printf ("AM29F040 (512 Kbit, uniform sector size)\n");
-				break;
-	case FLASH_AM400B:	printf ("AM29LV400B (4 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM400T:	printf ("AM29LV400T (4 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM800B:	printf ("AM29LV800B (8 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM800T:	printf ("AM29LV800T (8 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM160B:	printf ("AM29LV160B (16 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM160T:	printf ("AM29LV160T (16 Mbit, top boot sector)\n");
-				break;
-	case FLASH_AM320B:	printf ("AM29LV320B (32 Mbit, bottom boot sect)\n");
-				break;
-	case FLASH_AM320T:	printf ("AM29LV320T (32 Mbit, top boot sector)\n");
-				break;
-	case FLASH_SST800A:	printf ("SST39LF/VF800 (8 Mbit, uniform sector size)\n");
-				break;
-	case FLASH_SST160A:	printf ("SST39LF/VF160 (16 Mbit, uniform sector size)\n");
-				break;
-	default:		printf ("Unknown Chip Type\n");
-				break;
-	}
-
-	printf ("  Size: %ld KB in %d Sectors\n",
-		info->size >> 10, info->sector_count);
-
-	printf ("  Sector Start Addresses:");
-	for (i=0; i<info->sector_count; ++i) {
-		/*
-		 * Check if whole sector is erased
-		 */
-		if (i != (info->sector_count-1))
-		  size = info->start[i+1] - info->start[i];
-		else
-		  size = info->start[0] + info->size - info->start[i];
-		erased = 1;
-		flash = (volatile unsigned long *)info->start[i];
-		size = size >> 2;        /* divide by 4 for longword access */
-		for (k=0; k<size; k++)
-		  {
-		    if (*flash++ != 0xffffffff)
-		      {
-			erased = 0;
-			break;
-		      }
-		  }
-
-		if ((i % 5) == 0)
-			printf ("\n   ");
-#if 0 /* test-only */
-		printf (" %08lX%s",
-			info->start[i],
-			info->protect[i] ? " (RO)" : "     "
-#else
-		printf (" %08lX%s%s",
-			info->start[i],
-			erased ? " E" : "  ",
-			info->protect[i] ? "RO " : "   "
-#endif
-		);
-	}
-	printf ("\n");
-	return;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-static ulong flash_get_size (vu_long *addr, flash_info_t *info)
-{
-	short i;
-	FLASH_WORD_SIZE value;
-	ulong base = (ulong)addr;
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr;
-
-	/* Write auto select command: read Manufacturer ID */
-	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-	addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-	addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090;
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[2];
-#else
-	value = addr2[0];
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE)AMD_MANUFACT:
-		info->flash_id = FLASH_MAN_AMD;
-		break;
-	case (FLASH_WORD_SIZE)FUJ_MANUFACT:
-		info->flash_id = FLASH_MAN_FUJ;
-		break;
-	case (FLASH_WORD_SIZE)SST_MANUFACT:
-		info->flash_id = FLASH_MAN_SST;
-		break;
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		info->sector_count = 0;
-		info->size = 0;
-		return (0);			/* no or unknown flash	*/
-	}
-
-#ifdef CONFIG_ADCIOP
-	value = addr2[0];			/* device ID		*/
-	/*        printf("\ndev_code=%x\n", value); */
-#else
-	value = addr2[1];			/* device ID		*/
-#endif
-
-	switch (value) {
-	case (FLASH_WORD_SIZE)AMD_ID_F040B:
-		info->flash_id += FLASH_AM040;
-		info->sector_count = 8;
-		info->size = 0x0080000; /* => 512 ko */
-		break;
-	case (FLASH_WORD_SIZE)AMD_ID_LV400T:
-		info->flash_id += FLASH_AM400T;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;				/* => 0.5 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV400B:
-		info->flash_id += FLASH_AM400B;
-		info->sector_count = 11;
-		info->size = 0x00080000;
-		break;				/* => 0.5 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV800T:
-		info->flash_id += FLASH_AM800T;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV800B:
-		info->flash_id += FLASH_AM800B;
-		info->sector_count = 19;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV160T:
-		info->flash_id += FLASH_AM160T;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV160B:
-		info->flash_id += FLASH_AM160B;
-		info->sector_count = 35;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-#if 0	/* enable when device IDs are available */
-	case (FLASH_WORD_SIZE)AMD_ID_LV320T:
-		info->flash_id += FLASH_AM320T;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-
-	case (FLASH_WORD_SIZE)AMD_ID_LV320B:
-		info->flash_id += FLASH_AM320B;
-		info->sector_count = 67;
-		info->size = 0x00400000;
-		break;				/* => 4 MB		*/
-#endif
-	case (FLASH_WORD_SIZE)SST_ID_xF800A:
-		info->flash_id += FLASH_SST800A;
-		info->sector_count = 16;
-		info->size = 0x00100000;
-		break;				/* => 1 MB		*/
-
-	case (FLASH_WORD_SIZE)SST_ID_xF160A:
-		info->flash_id += FLASH_SST160A;
-		info->sector_count = 32;
-		info->size = 0x00200000;
-		break;				/* => 2 MB		*/
-
-	default:
-		info->flash_id = FLASH_UNKNOWN;
-		return (0);			/* => no or unknown flash */
-
-	}
-
-	/* set up sector start address table */
-	if (((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) ||
-	    (info->flash_id  == FLASH_AM040)){
-	    for (i = 0; i < info->sector_count; i++)
-		info->start[i] = base + (i * 0x00010000);
-	} else {
-	    if (info->flash_id & FLASH_BTYPE) {
-		/* set sector offsets for bottom boot block type	*/
-		info->start[0] = base + 0x00000000;
-		info->start[1] = base + 0x00004000;
-		info->start[2] = base + 0x00006000;
-		info->start[3] = base + 0x00008000;
-		for (i = 4; i < info->sector_count; i++) {
-			info->start[i] = base + (i * 0x00010000) - 0x00030000;
-		}
-	    } else {
-		/* set sector offsets for top boot block type		*/
-		i = info->sector_count - 1;
-		info->start[i--] = base + info->size - 0x00004000;
-		info->start[i--] = base + info->size - 0x00006000;
-		info->start[i--] = base + info->size - 0x00008000;
-		for (; i >= 0; i--) {
-			info->start[i] = base + i * 0x00010000;
-		}
-	    }
-	}
-
-	/* check for protected sectors */
-	for (i = 0; i < info->sector_count; i++) {
-		/* read sector protection at sector address, (A7 .. A0) = 0x02 */
-		/* D0 = 1 if protected */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		info->protect[i] = addr2[4] & 1;
-#else
-		addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]);
-		if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST)
-		  info->protect[i] = 0;
-		else
-		  info->protect[i] = addr2[2] & 1;
-#endif
-	}
-
-	/*
-	 * Prevent writes to uninitialized FLASH.
-	 */
-	if (info->flash_id != FLASH_UNKNOWN) {
-#if 0 /* test-only */
-#ifdef CONFIG_ADCIOP
-		addr2 = (volatile unsigned char *)info->start[0];
-		addr2[ADDR0] = 0xAA;
-		addr2[ADDR1] = 0x55;
-		addr2[ADDR0] = 0xF0;  /* reset bank */
-#else
-		addr2 = (FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif
-#else /* test-only */
-		addr2 = (FLASH_WORD_SIZE *)info->start[0];
-		*addr2 = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-#endif /* test-only */
-	}
-
-	return (info->size);
-}
-
-int wait_for_DQ7(flash_info_t *info, int sect)
-{
-	ulong start, now, last;
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]);
-
-	start = get_timer (0);
-    last  = start;
-    while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) {
-	if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
-	    printf ("Timeout\n");
-	    return -1;
-	}
-	/* show that we're waiting */
-	if ((now - last) > 1000) {  /* every second */
-	    putc ('.');
-	    last = now;
-	}
-    }
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int	flash_erase (flash_info_t *info, int s_first, int s_last)
-{
-	volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]);
-	volatile FLASH_WORD_SIZE *addr2;
-	int flag, prot, sect, l_sect;
-	int i;
-
-	if ((s_first < 0) || (s_first > s_last)) {
-		if (info->flash_id == FLASH_UNKNOWN) {
-			printf ("- missing\n");
-		} else {
-			printf ("- no sectors to erase\n");
-		}
-		return 1;
-	}
-
-	if (info->flash_id == FLASH_UNKNOWN) {
-		printf ("Can't erase unknown flash type - aborted\n");
-		return 1;
-	}
-
-	prot = 0;
-	for (sect=s_first; sect<=s_last; ++sect) {
-		if (info->protect[sect]) {
-			prot++;
-		}
-	}
-
-	if (prot) {
-		printf ("- Warning: %d protected sectors will not be erased!\n",
-			prot);
-	} else {
-		printf ("\n");
-	}
-
-	l_sect = -1;
-
-	/* Disable interrupts which might cause a timeout here */
-	flag = disable_interrupts();
-
-	/* Start erase on unprotected sectors */
-	for (sect = s_first; sect<=s_last; sect++) {
-		if (info->protect[sect] == 0) {	/* not protected */
-		    addr2 = (FLASH_WORD_SIZE *)(info->start[sect]);
-		    printf("Erasing sector %p\n", addr2);	/* CLH */
-
-		    if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) {
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (FLASH_WORD_SIZE)0x00500050;  /* block erase */
-			for (i=0; i<50; i++)
-				udelay(1000);  /* wait 1 ms */
-		    } else {
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080;
-			addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA;
-			addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055;
-			addr2[0] = (FLASH_WORD_SIZE)0x00300030;  /* sector erase */
-		    }
-		    l_sect = sect;
-		    /*
-		     * Wait for each sector to complete, it's more
-		     * reliable.  According to AMD Spec, you must
-		     * issue all erase commands within a specified
-		     * timeout.  This has been seen to fail, especially
-		     * if printf()s are included (for debug)!!
-		     */
-		    wait_for_DQ7(info, sect);
-		}
-	}
-
-	/* re-enable interrupts if necessary */
-	if (flag)
-		enable_interrupts();
-
-	/* wait at least 80us - let's wait 1 ms */
-	udelay (1000);
-
-#if 0
-	/*
-	 * We wait for the last triggered sector
-	 */
-	if (l_sect < 0)
-		goto DONE;
-	wait_for_DQ7(info, l_sect);
-
-DONE:
-#endif
-	/* reset to read mode */
-	addr = (FLASH_WORD_SIZE *)info->start[0];
-	addr[0] = (FLASH_WORD_SIZE)0x00F000F0;	/* reset bank */
-
-	printf (" done\n");
-	return 0;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
-	ulong cp, wp, data;
-	int i, l, rc;
-
-	wp = (addr & ~3);	/* get lower word aligned address */
-
-	/*
-	 * handle unaligned start bytes
-	 */
-	if ((l = addr - wp) != 0) {
-		data = 0;
-		for (i=0, cp=wp; i<l; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-		for (; i<4 && cnt>0; ++i) {
-			data = (data << 8) | *src++;
-			--cnt;
-			++cp;
-		}
-		for (; cnt==0 && i<4; ++i, ++cp) {
-			data = (data << 8) | (*(uchar *)cp);
-		}
-
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp += 4;
-	}
-
-	/*
-	 * handle word aligned part
-	 */
-	while (cnt >= 4) {
-		data = 0;
-		for (i=0; i<4; ++i) {
-			data = (data << 8) | *src++;
-		}
-		if ((rc = write_word(info, wp, data)) != 0) {
-			return (rc);
-		}
-		wp  += 4;
-		cnt -= 4;
-	}
-
-	if (cnt == 0) {
-		return (0);
-	}
-
-	/*
-	 * handle unaligned tail bytes
-	 */
-	data = 0;
-	for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) {
-		data = (data << 8) | *src++;
-		--cnt;
-	}
-	for (; i<4; ++i, ++cp) {
-		data = (data << 8) | (*(uchar *)cp);
-	}
-
-	return (write_word(info, wp, data));
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word (flash_info_t * info, ulong dest, ulong data)
-{
-	volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]);
-	volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest;
-	volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data;
-	ulong start;
-	int i;
-
-	/* Check if Flash is (sufficiently) erased */
-	if ((*((volatile FLASH_WORD_SIZE *) dest) &
-	    (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) {
-		return (2);
-	}
-
-	for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) {
-		int flag;
-
-		/* Disable interrupts which might cause a timeout here */
-		flag = disable_interrupts ();
-
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA;
-		addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055;
-		addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0;
-
-		dest2[i] = data2[i];
-
-		/* re-enable interrupts if necessary */
-		if (flag)
-			enable_interrupts ();
-
-		/* data polling for D7 */
-		start = get_timer (0);
-		while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) !=
-		       (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) {
-
-			if (get_timer (start) > CFG_FLASH_WRITE_TOUT) {
-				return (1);
-			}
-		}
-	}
-
-	return (0);
-}
-
-/*-----------------------------------------------------------------------
- */
diff --git a/board/walnut405/init.S b/board/walnut405/init.S
deleted file mode 100644
index 70d029aeda..0000000000
--- a/board/walnut405/init.S
+++ /dev/null
@@ -1,99 +0,0 @@
-/*------------------------------------------------------------------------------+ */
-/* */
-/*       This source code has been made available to you by IBM on an AS-IS */
-/*       basis.  Anyone receiving this source is licensed under IBM */
-/*       copyrights to use it in any way he or she deems fit, including */
-/*       copying it, modifying it, compiling it, and redistributing it either */
-/*       with or without modifications.  No license under IBM patents or */
-/*       patent applications is to be implied by the copyright license. */
-/* */
-/*       Any user of this software should understand that IBM cannot provide */
-/*       technical support for this software and will not be responsible for */
-/*       any consequences resulting from the use of this software. */
-/* */
-/*       Any person who transfers this source code or any derivative work */
-/*       must include the IBM copyright notice, this paragraph, and the */
-/*       preceding two paragraphs in the transferred software. */
-/* */
-/*       COPYRIGHT   I B M   CORPORATION 1995 */
-/*       LICENSED MATERIAL  -  PROGRAM PROPERTY OF I B M */
-/*------------------------------------------------------------------------------- */
-
-/*----------------------------------------------------------------------------- */
-/* Function:     ext_bus_cntlr_init */
-/* Description:  Initializes the External Bus Controller for the external */
-/*		peripherals. IMPORTANT: For pass1 this code must run from */
-/*		cache since you can not reliably change a peripheral banks */
-/*		timing register (pbxap) while running code from that bank. */
-/*		For ex., since we are running from ROM on bank 0, we can NOT */
-/*		execute the code that modifies bank 0 timings from ROM, so */
-/*		we run it from cache. */
-/*	Bank 0 - Flash and SRAM */
-/*	Bank 1 - NVRAM/RTC */
-/*	Bank 2 - Keyboard/Mouse controller */
-/*	Bank 3 - IR controller */
-/*	Bank 4 - not used */
-/*	Bank 5 - not used */
-/*	Bank 6 - not used */
-/*	Bank 7 - FPGA registers */
-/*----------------------------------------------------------------------------- */
-#include <ppc4xx.h>
-
-#include <ppc_asm.tmpl>
-#include <ppc_defs.h>
-
-#include <asm/cache.h>
-#include <asm/mmu.h>
-
-
-	.globl	ext_bus_cntlr_init
-ext_bus_cntlr_init:
-	mflr    r4                      /* save link register */
-	bl      ..getAddr
-..getAddr:
-	mflr    r3                      /* get address of ..getAddr */
-	mtlr    r4                      /* restore link register */
-	addi    r4,0,14                 /* set ctr to 10; used to prefetch */
-	mtctr   r4                      /* 10 cache lines to fit this function */
-					/* in cache (gives us 8x10=80 instrctns) */
-..ebcloop:
-	icbt    r0,r3                   /* prefetch cache line for addr in r3 */
-	addi    r3,r3,32		/* move to next cache line */
-	bdnz    ..ebcloop               /* continue for 10 cache lines */
-
-	/*------------------------------------------------------------------- */
-	/* Delay to ensure all accesses to ROM are complete before changing */
-	/* bank 0 timings. 200usec should be enough. */
-	/*   200,000,000 (cycles/sec) X .000200 (sec) = 0x9C40 cycles */
-	/*------------------------------------------------------------------- */
-	addis	r3,0,0x0
-	ori     r3,r3,0xA000          /* ensure 200usec have passed since reset */
-	mtctr   r3
-..spinlp:
-	bdnz    ..spinlp                /* spin loop */
-
-	/*----------------------------------------------------------------------- */
-	/* Memory Bank 0 (Flash and SRAM) initialization */
-	/*----------------------------------------------------------------------- */
-	addi    r4,0,pb0ap
-	mtdcr   ebccfga,r4
-	addis   r4,0,0x9B01
-	ori     r4,r4,0x5480
-	mtdcr   ebccfgd,r4
-
-	addi    r4,0,pb0cr
-	mtdcr   ebccfga,r4
-	addis   r4,0,0xFFF1           /* BAS=0xFFF,BS=0x0(1MB),BU=0x3(R/W), */
-	ori     r4,r4,0x8000          /* BW=0x0( 8 bits) */
-	mtdcr   ebccfgd,r4
-
-	blr
-
-
-/*----------------------------------------------------------------------------- */
-/* Function:     sdram_init */
-/* Description:  Dummy implementation here - done in C later */
-/*----------------------------------------------------------------------------- */
-	.globl  sdram_init
-sdram_init:
-	blr
diff --git a/board/walnut405/u-boot.lds.debug b/board/walnut405/u-boot.lds.debug
deleted file mode 100644
index d483424ad6..0000000000
--- a/board/walnut405/u-boot.lds.debug
+++ /dev/null
@@ -1,135 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-OUTPUT_ARCH(powerpc)
-SEARCH_DIR(/lib); SEARCH_DIR(/usr/lib); SEARCH_DIR(/usr/local/lib); SEARCH_DIR(/usr/local/powerpc-any-elf/lib);
-/* Do we need any of these for elf?
-   __DYNAMIC = 0;    */
-SECTIONS
-{
-  /* Read-only sections, merged into text segment: */
-  . = + SIZEOF_HEADERS;
-  .interp : { *(.interp) }
-  .hash          : { *(.hash)		}
-  .dynsym        : { *(.dynsym)		}
-  .dynstr        : { *(.dynstr)		}
-  .rel.text      : { *(.rel.text)		}
-  .rela.text     : { *(.rela.text) 	}
-  .rel.data      : { *(.rel.data)		}
-  .rela.data     : { *(.rela.data) 	}
-  .rel.rodata    : { *(.rel.rodata) 	}
-  .rela.rodata   : { *(.rela.rodata) 	}
-  .rel.got       : { *(.rel.got)		}
-  .rela.got      : { *(.rela.got)		}
-  .rel.ctors     : { *(.rel.ctors)	}
-  .rela.ctors    : { *(.rela.ctors)	}
-  .rel.dtors     : { *(.rel.dtors)	}
-  .rela.dtors    : { *(.rela.dtors)	}
-  .rel.bss       : { *(.rel.bss)		}
-  .rela.bss      : { *(.rela.bss)		}
-  .rel.plt       : { *(.rel.plt)		}
-  .rela.plt      : { *(.rela.plt)		}
-  .init          : { *(.init)	}
-  .plt : { *(.plt) }
-  .text      :
-  {
-    /* WARNING - the following is hand-optimized to fit within	*/
-    /* the sector layout of our flash chips!	XXX FIXME XXX	*/
-
-    mpc8xx/start.o	(.text)
-    common/dlmalloc.o	(.text)
-    lib_generic/vsprintf.o	(.text)
-    lib_generic/crc32.o		(.text)
-    lib_ppc/extable.o	(.text)
-
-    common/environment.o(.text)
-
-    *(.text)
-    *(.fixup)
-    *(.got1)
-  }
-  _etext = .;
-  PROVIDE (etext = .);
-  .rodata    :
-  {
-    *(.rodata)
-    *(.rodata1)
-  }
-  .fini      : { *(.fini)    } =0
-  .ctors     : { *(.ctors)   }
-  .dtors     : { *(.dtors)   }
-
-  /* Read-write section, merged into data segment: */
-  . = (. + 0x0FFF) & 0xFFFFF000;
-  _erotext = .;
-  PROVIDE (erotext = .);
-  .reloc   :
-  {
-    *(.got)
-    _GOT2_TABLE_ = .;
-    *(.got2)
-    _FIXUP_TABLE_ = .;
-    *(.fixup)
-  }
-  __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2;
-  __fixup_entries = (. - _FIXUP_TABLE_)>>2;
-
-  .data    :
-  {
-    *(.data)
-    *(.data1)
-    *(.sdata)
-    *(.sdata2)
-    *(.dynamic)
-    CONSTRUCTORS
-  }
-  _edata  =  .;
-  PROVIDE (edata = .);
-
-  __u_boot_cmd_start = .;
-  .u_boot_cmd : { *(.u_boot_cmd) }
-  __u_boot_cmd_end = .;
-
-
-  __start___ex_table = .;
-  __ex_table : { *(__ex_table) }
-  __stop___ex_table = .;
-
-  . = ALIGN(4096);
-  __init_begin = .;
-  .text.init : { *(.text.init) }
-  .data.init : { *(.data.init) }
-  . = ALIGN(4096);
-  __init_end = .;
-
-  __bss_start = .;
-  .bss       :
-  {
-   *(.sbss) *(.scommon)
-   *(.dynbss)
-   *(.bss)
-   *(COMMON)
-  }
-  _end = . ;
-  PROVIDE (end = .);
-}
diff --git a/board/walnut405/walnut405.c b/board/walnut405/walnut405.c
deleted file mode 100644
index 7035599e90..0000000000
--- a/board/walnut405/walnut405.c
+++ /dev/null
@@ -1,133 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include "walnut405.h"
-#include <asm/processor.h>
-#include <spd_sdram.h>
-
-int board_early_init_f (void)
-{
-   /*-------------------------------------------------------------------------+
-   | Interrupt controller setup for the Walnut board.
-   | Note: IRQ 0-15  405GP internally generated; active high; level sensitive
-   |       IRQ 16    405GP internally generated; active low; level sensitive
-   |       IRQ 17-24 RESERVED
-   |       IRQ 25 (EXT IRQ 0) FPGA; active high; level sensitive
-   |       IRQ 26 (EXT IRQ 1) SMI; active high; level sensitive
-   |       IRQ 27 (EXT IRQ 2) Not Used
-   |       IRQ 28 (EXT IRQ 3) PCI SLOT 3; active low; level sensitive
-   |       IRQ 29 (EXT IRQ 4) PCI SLOT 2; active low; level sensitive
-   |       IRQ 30 (EXT IRQ 5) PCI SLOT 1; active low; level sensitive
-   |       IRQ 31 (EXT IRQ 6) PCI SLOT 0; active low; level sensitive
-   | Note for Walnut board:
-   |       An interrupt taken for the FPGA (IRQ 25) indicates that either
-   |       the Mouse, Keyboard, IRDA, or External Expansion caused the
-   |       interrupt. The FPGA must be read to determine which device
-   |       caused the interrupt. The default setting of the FPGA clears
-   |
-   +-------------------------------------------------------------------------*/
-
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-	mtdcr (uicer, 0x00000000);	/* disable all ints */
-	mtdcr (uiccr, 0x00000020);	/* set all but FPGA SMI to be non-critical */
-	mtdcr (uicpr, 0xFFFFFFE0);	/* set int polarities */
-	mtdcr (uictr, 0x10000000);	/* set int trigger levels */
-	mtdcr (uicvcr, 0x00000001);	/* set vect base=0,INT0 highest priority */
-	mtdcr (uicsr, 0xFFFFFFFF);	/* clear all ints */
-
-#define mtebc(reg, data)  mtdcr(ebccfga,reg);mtdcr(ebccfgd,data)
-	/* BAS=0xF00,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb1ap, 0x02815480);
-	mtebc (pb1cr, 0xF0018000);
-
-	/* BAS=0xF01,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb2ap, 0x04815A80);
-	mtebc (pb2cr, 0xF0118000);
-
-	/* BAS=0xF02,BS=0x0(1MB),BU=0x3(R/W),BW=0x0( 8 bits) */
-	mtebc (pb3ap, 0x01815280);
-	mtebc (pb3cr, 0xF0218000);
-
-	/* BAS=0xF03,BS=0x0(1MB),BU=0x3(R/W),BW=0x0(8 bits) */
-	mtebc (pb7ap, 0x01815280);
-	mtebc (pb7cr, 0xF0318000);
-
-	/* set UART1 control to select CTS/RTS */
-#define FPGA_BRDC       0xF0300004
-	*(volatile char *) (FPGA_BRDC) |= 0x1;
-
-	return 0;
-}
-
-
-/* ------------------------------------------------------------------------- */
-
-/*
- * Check Board Identity:
- */
-
-int checkboard (void)
-{
-	unsigned char *s = getenv ("serial#");
-	unsigned char *e;
-
-	puts ("Board: ");
-
-	if (!s || strncmp (s, "WALNUT405", 9)) {
-		puts ("### No HW ID - assuming WALNUT405");
-	} else {
-		for (e = s; *e; ++e) {
-			if (*e == ' ')
-				break;
-		}
-		for (; s < e; ++s) {
-			putc (*s);
-		}
-	}
-	putc ('\n');
-
-	return (0);
-}
-
-
-/* -------------------------------------------------------------------------
-  initdram(int board_type) reads EEPROM via I2c. EEPROM contains all of
-  the necessary info for SDRAM controller configuration
-   ------------------------------------------------------------------------- */
-long int initdram (int board_type)
-{
-	return  spd_sdram (0);
-}
-
-/* ------------------------------------------------------------------------- */
-
-int testdram (void)
-{
-	/* TODO: XXX XXX XXX */
-	printf ("test: xxx MB - ok\n");
-
-	return (0);
-}
-
-/* ------------------------------------------------------------------------- */
diff --git a/board/walnut405/walnut405.h b/board/walnut405/walnut405.h
deleted file mode 100644
index 5fc313a258..0000000000
--- a/board/walnut405/walnut405.h
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- * (C) Copyright 2000
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/****************************************************************************
- * FLASH Memory Map as used by TQ Monitor:
- *
- *                          Start Address    Length
- * +-----------------------+ 0x4000_0000     Start of Flash -----------------
- * | MON8xx code           | 0x4000_0100     Reset Vector
- * +-----------------------+ 0x400?_????
- * | (unused)              |
- * +-----------------------+ 0x4001_FF00
- * | Ethernet Addresses    |                 0x78
- * +-----------------------+ 0x4001_FF78
- * | (Reserved for MON8xx) |                 0x44
- * +-----------------------+ 0x4001_FFBC
- * | Lock Address          |                 0x04
- * +-----------------------+ 0x4001_FFC0                     ^
- * | Hardware Information  |                 0x40            | MON8xx
- * +=======================+ 0x4002_0000 (sector border)    -----------------
- * | Autostart Header      |                                 | Applications
- * | ...                   |                                 v
- *
- *****************************************************************************/
diff --git a/doc/README.AMCC-eval-boards-cleanup b/doc/README.AMCC-eval-boards-cleanup
new file mode 100644
index 0000000000..901bd875c6
--- /dev/null
+++ b/doc/README.AMCC-eval-boards-cleanup
@@ -0,0 +1,31 @@
+---------------------------------------------------------------------
+Cleanup of AMCC eval boards (Walnut/Sycamore, Bubinga, Ebony, Ocotea)
+---------------------------------------------------------------------
+
+Changes to all AMCC eval boards:
+--------------------------------
+
+o Changed u-boot image size to 256 kBytes instead of 512 kBytes on most
+  boards.
+
+o Use 115200 baud as default console baudrate.
+
+o Added config option to use redundant environment in flash. This is also
+  the default setting. Option for environment in nvram is still available
+  for backward compatibility.
+
+o Merged board specific flash drivers to common flash driver:
+  board/amcc/common/flash.c
+
+
+Sycamore/Walnut (one port supporting both eval boards):
+-------------------------------------------------------
+
+o Cleanup to allow easier "cloning" for different (custom) boards:
+
+  o Moved EBC configuration from board specific asm-file "init.S"
+    using defines in board configuration file. No board specific
+    asm file needed anymore.
+
+
+August 01 2005, Stefan Roese <sr@denx.de>
diff --git a/include/configs/bamboo.h b/include/configs/bamboo.h
new file mode 100644
index 0000000000..da3c29f191
--- /dev/null
+++ b/include/configs/bamboo.h
@@ -0,0 +1,316 @@
+/*
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.	 See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/************************************************************************
+ * bamboo.h - configuration for BAMBOO board
+ ***********************************************************************/
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*-----------------------------------------------------------------------
+ * High Level Configuration Options
+ *----------------------------------------------------------------------*/
+#define CONFIG_BAMBOO				1	/* Board is BAMBOO           */
+#define CONFIG_440_EP				1	/* Specific PPC440EP support */
+
+#define CONFIG_4xx					1	/* ... PPC4xx family	*/
+#define CONFIG_BOARD_EARLY_INIT_F 	1   /* Call board_early_init_f	*/
+#undef	CFG_DRAM_TEST					/* disable - takes long time! */
+//#define CONFIG_SYS_CLK_FREQ	66666666    /* external freq to pll	*/
+#define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
+
+/*-----------------------------------------------------------------------
+ * Base addresses -- Note these are effective addresses where the
+ * actual resources get mapped (not physical addresses)
+ *----------------------------------------------------------------------*/
+#define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		    */
+#define CFG_FLASH_BASE	    0xfe000000	    /* start of FLASH		*/
+#define CFG_MONITOR_BASE    TEXT_BASE	    /* start of monitor		*/
+#define CFG_PCI_MEMBASE	    0xa0000000	    /* mapped pci memory	*/
+#define CFG_PCI_MEMBASE1    CFG_PCI_MEMBASE  + 0x10000000
+#define CFG_PCI_MEMBASE2    CFG_PCI_MEMBASE1 + 0x10000000
+#define CFG_PCI_MEMBASE3    CFG_PCI_MEMBASE2 + 0x10000000
+
+
+/*Don't change either of these*/
+#define CFG_PERIPHERAL_BASE 0xef600000	    /* internal peripherals	*/
+#define CFG_PCI_BASE	    0xe0000000	    /* internal PCI regs	*/
+/*Don't change either of these*/
+
+#define CFG_USB_DEVICE 0x50000000
+#define CFG_NVRAM_BASE_ADDR 0x80000000
+#define CFG_BCSR_BASE	    (CFG_NVRAM_BASE_ADDR | 0x2000)
+
+/*-----------------------------------------------------------------------
+ * Initial RAM & stack pointer (placed in SDRAM)
+ *----------------------------------------------------------------------*/
+#define CFG_INIT_RAM_ADDR	  0xf0000000		/* DCache */
+#define CFG_INIT_RAM_END	0x2000
+#define CFG_GBL_DATA_SIZE	256		    	/* num bytes initial data	*/
+#define CFG_GBL_DATA_OFFSET	(CFG_INIT_RAM_END - CFG_GBL_DATA_SIZE)
+#define CFG_INIT_SP_OFFSET	CFG_GBL_DATA_OFFSET
+
+#define CFG_MONITOR_LEN	    (256 * 1024)    /* Reserve 256 kB for Mon	*/
+#define CFG_MALLOC_LEN	    (128 * 1024)    /* Reserve 128 kB for malloc*/
+#define CFG_KBYTES_SDRAM	( 128 * 1024)	/* 128MB                     */
+//#define CFG_SDRAM_BANKS     (2)
+#define CFG_SDRAM_BANKS     (1)
+
+/*-----------------------------------------------------------------------
+ * Serial Port
+ *----------------------------------------------------------------------*/
+#define CFG_EXT_SERIAL_CLOCK	11059200 /* use external 11.059MHz clk	*/
+#define CONFIG_BAUDRATE			115200
+#define CONFIG_SERIAL_MULTI   1
+/*define this if you want console on UART1*/
+#undef CONFIG_UART1_CONSOLE
+
+#define CFG_BAUDRATE_TABLE  \
+    {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
+
+/*-----------------------------------------------------------------------
+ * NVRAM/RTC
+ *
+ * NOTE: The RTC registers are located at 0x7FFF0 - 0x7FFFF
+ * The DS1558 code assumes this condition
+ *
+ *----------------------------------------------------------------------*/
+#define CFG_NVRAM_SIZE	    (0x2000 - 0x10) /* NVRAM size(8k)- RTC regs */
+#define CONFIG_RTC_DS1556	1		         /* DS1556 RTC		*/
+
+/*-----------------------------------------------------------------------
+ * FLASH related
+ *----------------------------------------------------------------------*/
+#if 0 /* test-only */
+#define CFG_MAX_FLASH_BANKS	1		    /* number of banks	    */
+#define CFG_MAX_FLASH_SECT	256		    /* sectors per device   */
+
+#undef	CFG_FLASH_CHECKSUM
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	120000	    /* Timeout for Flash Write (in ms)	*/
+#else
+#define CFG_FLASH_CFI				/* The flash is CFI compatible  */
+#define CFG_FLASH_CFI_DRIVER			/* Use common CFI driver        */
+#define CFG_FLASH_CFI_AMD_RESET	1		/* AMD RESET for STM 29W320DB!  */
+
+#define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
+#define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
+
+#define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
+#define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
+
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+#endif
+
+/*-----------------------------------------------------------------------
+ * DDR SDRAM
+ *----------------------------------------------------------------------*/
+#undef CONFIG_SPD_EEPROM               /* Don't use SPD EEPROM for setup    */
+
+/*-----------------------------------------------------------------------
+ * I2C
+ *----------------------------------------------------------------------*/
+#define CONFIG_HARD_I2C		1	    /* I2C with hardware support	*/
+#undef	CONFIG_SOFT_I2C			    /* I2C bit-banged		*/
+#define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
+#define CFG_I2C_SLAVE		0x7F
+
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#undef  CFG_ENV_IS_IN_NVRAM		    /*No NVRAM on board*/
+#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
+#define CFG_ENV_IS_IN_EEPROM 1
+
+/* Define to allow the user to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#define CFG_I2C_MULTI_EEPROMS
+#define CFG_ENV_SIZE		0x200	    /* Size of Environment vars */
+#define CFG_ENV_OFFSET		0x0
+#define CFG_I2C_EEPROM_ADDR	(0xa8>>1)
+#define CFG_I2C_EEPROM_ADDR_LEN 1
+#define CFG_EEPROM_PAGE_WRITE_ENABLE
+#define CFG_EEPROM_PAGE_WRITE_BITS 3
+#define CFG_EEPROM_PAGE_WRITE_DELAY_MS 10
+
+#define CONFIG_BOOTCOMMAND	"bootm 0xfe000000"    /* autoboot command */
+#define CONFIG_BOOTDELAY	3		    /* disable autoboot */
+
+#define CONFIG_LOADS_ECHO		1	/* echo on for serial download	*/
+#define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
+
+#define CONFIG_MII			1	/* MII PHY management		*/
+#define CONFIG_NET_MULTI    1   /* required for netconsole  */
+#define CONFIG_PHY1_ADDR    3
+#define CONFIG_HAS_ETH1		1	/* add support for "eth1addr"	*/
+#define CONFIG_PHY_ADDR		1	/* PHY address, See schematics	*/
+#define CONFIG_NETMASK		255.255.255.0
+#define CONFIG_IPADDR		10.0.4.251
+#define CONFIG_ETHADDR		00:10:EC:00:12:34
+#define CONFIG_ETH1ADDR		00:10:EC:00:12:35
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
+#define CONFIG_SERVERIP		10.0.4.115
+
+/* Partitions */
+#define CONFIG_MAC_PARTITION
+#define CONFIG_DOS_PARTITION
+#define CONFIG_ISO_PARTITION
+
+#ifdef CONFIG_440_EP
+/* USB */
+#define CONFIG_USB_OHCI
+#define CONFIG_USB_STORAGE
+
+/*Comment this out to enable USB 1.1 device*/
+#define USB_2_0_DEVICE
+#endif /*CONFIG_440_EP*/
+
+#ifdef DEBUG
+#define CONFIG_PANIC_HANG
+#else
+#define CONFIG_HW_WATCHDOG			/* watchdog */
+#endif
+
+#ifdef CONFIG_440_EP
+	/* Need to define POST */
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL	| \
+			CFG_CMD_DATE	|   \
+			CFG_CMD_DHCP	|   \
+			CFG_CMD_DIAG	|   \
+			CFG_CMD_ECHO	|   \
+			CFG_CMD_EEPROM	|   \
+			CFG_CMD_ELF	|   \
+    /*      CFG_CMD_EXT2    |*/ \
+	/*		CFG_CMD_FAT		|*/	\
+			CFG_CMD_I2C	|	\
+	/*		CFG_CMD_IDE		|*/	\
+			CFG_CMD_IRQ	|	\
+    /*     	CFG_CMD_KGDB	|*/	\
+            		CFG_CMD_MII     |   \
+			CFG_CMD_PCI		|	\
+			CFG_CMD_PING	| 	\
+			CFG_CMD_REGINFO | 	\
+			CFG_CMD_SDRAM	|   \
+			CFG_CMD_FLASH   |   \
+	/*		CFG_CMD_SPI		|*/	\
+			CFG_CMD_USB	|	\
+			0 ) & ~CFG_CMD_IMLS)
+#else
+#define CONFIG_COMMANDS	       ((CONFIG_CMD_DFL	| \
+			CFG_CMD_DATE	|   \
+			CFG_CMD_DHCP	|   \
+			CFG_CMD_DIAG	|   \
+			CFG_CMD_ECHO	|   \
+			CFG_CMD_EEPROM	|   \
+			CFG_CMD_ELF	|   \
+    /*      CFG_CMD_EXT2    |*/ \
+	/*		CFG_CMD_FAT		|*/	\
+			CFG_CMD_I2C	|	\
+	/*		CFG_CMD_IDE		|*/	\
+			CFG_CMD_IRQ	|	\
+    /*     	CFG_CMD_KGDB	|*/	\
+            		CFG_CMD_MII     |   \
+			CFG_CMD_PCI		|	\
+			CFG_CMD_PING	| 	\
+			CFG_CMD_REGINFO | 	\
+			CFG_CMD_SDRAM	|   \
+			CFG_CMD_FLASH   |   \
+	/*		CFG_CMD_SPI		|*/	\
+			0 ) & ~CFG_CMD_IMLS)
+#endif
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#include <cmd_confdefs.h>
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CFG_LONGHELP			/* undef to save memory		*/
+#define CFG_PROMPT	"=> "		/* Monitor Command Prompt	*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CBSIZE	1024		/* Console I/O Buffer Size	*/
+#else
+#define CFG_CBSIZE	256		/* Console I/O Buffer Size	*/
+#endif
+#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
+#define CFG_MAXARGS	16		/* max number of command args	*/
+#define CFG_BARGSIZE	CFG_CBSIZE	/* Boot Argument Buffer Size	*/
+
+#define CFG_MEMTEST_START	0x0400000	/* memtest works on	*/
+#define CFG_MEMTEST_END		0x0C00000	/* 4 ... 12 MB in DRAM	*/
+
+#define CFG_LOAD_ADDR		0x100000	/* default load address */
+#define CFG_EXTBDINFO		    1	/* To use extended board_into (bd_t) */
+#define CONFIG_LYNXKDI          1   /* support kdi files */
+
+#define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
+
+/*-----------------------------------------------------------------------
+ * PCI stuff
+ *-----------------------------------------------------------------------
+ */
+/* General PCI */
+#define CONFIG_PCI			            /* include pci support	        */
+#undef  CONFIG_PCI_PNP			        /* do (not) pci plug-and-play         */
+#define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
+#define CFG_PCI_TARGBASE    0x80000000  /* PCIaddr mapped to CFG_PCI_MEMBASE */
+
+/* Board-specific PCI */
+#define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
+#define CFG_PCI_TARGET_INIT
+#define CFG_PCI_MASTER_INIT
+
+#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
+#define CFG_PCI_SUBSYS_ID 0xcafe        /* Whatever */
+
+/*
+ * For booting Linux, the board info and command line data
+ * have to be in the first 8 MB of memory, since this is
+ * the maximum mapped by the Linux kernel during initialization.
+ */
+#define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_CACHELINE_SIZE	32	/* ...			*/
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
+#endif
+
+/*
+ * Internal Definitions
+ *
+ * Boot Flags
+ */
+#define BOOTFLAG_COLD	0x01		/* Normal Power-On: Boot from FLASH	*/
+#define BOOTFLAG_WARM	0x02		/* Software reboot			*/
+
+#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#define CONFIG_KGDB_BAUDRATE	230400	/* speed to run kgdb serial port */
+#define CONFIG_KGDB_SER_INDEX	2	/* which serial port to use */
+#endif
+#endif	/* __CONFIG_H */
diff --git a/include/configs/BUBINGA405EP.h b/include/configs/bubinga.h
index 507cb75948..c7451959a8 100644
--- a/include/configs/BUBINGA405EP.h
+++ b/include/configs/bubinga.h
@@ -1,5 +1,5 @@
 /*
- * (C) Copyright 2000, 2001
+ * (C) Copyright 2000-2005
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
@@ -28,11 +28,6 @@
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* Debug options */
-/*#define __DEBUG_START_FROM_SRAM__ */
-/*#define DEBUG	1*/
-
-
 /*
  * High Level Configuration Options
  * (easy to change)
@@ -40,7 +35,7 @@
 
 #define CONFIG_405EP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family   */
-#define CONFIG_BUBINGA405EP	1	/* ...on a BUBINGA405EP board	*/
+#define CONFIG_BUBINGA	        1	/* ...on a BUBINGA board	*/
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
@@ -49,8 +44,6 @@
 #define CONFIG_NO_SERIAL_EEPROM
 /*#undef CONFIG_NO_SERIAL_EEPROM*/
 /*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
 #ifdef CONFIG_NO_SERIAL_EEPROM
 
 /*
@@ -75,49 +68,60 @@
 
 #endif
 /*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-/*----------------------------------------------------------------------------*/
-
-/*#define CFG_ENV_IS_IN_FLASH     1*/	/* use FLASH for environment vars	*/
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
-
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE		115200
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
 
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
 #if 1
-#define CONFIG_BOOTCOMMAND	"" /* autoboot command	*/
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
 #else
-#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
 #endif
 
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
-#if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
-#else
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
-#endif
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=bubinga\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/bubinga/uImage\0"				\
+	"kernel_addr=fff80000\0"					\
+	"ramdisk_addr=fff90000\0"					\
+	"load=tftp 100000 /tftpboot/bubinga/u-boot.bin\0"		\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
 
 #if 0
-#define CONFIG_BOOTARGS		"root=/dev/nfs "                        \
-    "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 "        \
-    "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "			\
-   "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
+#define CONFIG_BAUDRATE		115200
+
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
 
@@ -126,29 +130,8 @@
 
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Bubinga	*/
 
-/*
-#ifndef __DEBUG_START_FROM_SRAM__
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_ELF	)
-#else
-#define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_DATE	| \
-				CFG_CMD_ELF	)
-#endif
-*/
-
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_CACHE	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
@@ -156,14 +139,13 @@
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
 				CFG_CMD_MII	| \
 				CFG_CMD_NET	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_PING	| \
 				CFG_CMD_REGINFO	| \
 				CFG_CMD_SDRAM	| \
-				0		)
+				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -198,6 +180,7 @@
  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
 #undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 #define CFG_BASE_BAUD       691200
@@ -211,6 +194,17 @@
 
 #define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	16	  /* Number of ethernet rx buffers & descriptors */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
@@ -224,7 +218,6 @@
 #define CFG_I2C_EEPROM_ADDR_LEN	1	/* Bytes of address		*/
 #endif
 
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -239,8 +232,8 @@
 					/* resource configuration       */
 #define CONFIG_PCI_SCAN_SHOW            /* show pci devices on startup  */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 #define CFG_PCI_CLASSCODE       0x0600  /* PCI Class Code: bridge/host  */
 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 #define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
@@ -253,9 +246,6 @@
  * External peripheral base address
  *-----------------------------------------------------------------------
  */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported     */
-#undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
-
 #define	CFG_KEY_REG_BASE_ADDR	0xF0100000
 #define	CFG_IR_REG_BASE_ADDR	0xF0200000
 #define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
@@ -266,20 +256,11 @@
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
-#ifdef __DEBUG_START_FROM_SRAM__
-#define CFG_SRAM_BASE		0xFFF80000
-#define CFG_FLASH_BASE		0xFFF00000
-#define CFG_MONITOR_BASE	CFG_SRAM_BASE
-#else
 #define CFG_SRAM_BASE		0xFFF00000
 #define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
-#endif
-
-
-/*#define CFG_MONITOR_LEN		(200 * 1024)	/XXX* Reserve 200 kB for Monitor	*/
-#define CFG_MONITOR_LEN		(192 * 1024)	/* Reserve 200 kB for Monitor	*/
+#define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
 
 /*
  * For booting Linux, the board info and command line data
@@ -287,6 +268,7 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
@@ -296,13 +278,20 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/* BEG ENVIRONNEMENT FLASH */
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
@@ -332,7 +321,6 @@
 #define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
 #define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
 
-
 /*-----------------------------------------------------------------------
  * Definitions for initial stack pointer and data area (in data cache)
  */
@@ -424,7 +412,6 @@
 #define FPGA_REG1_OFFB_FLASH  0x02       /* Off board flash                   */
 #define FPGA_REG1_SRAM_BOOT   0x01       /* SRAM at 0xFFF80000 not Flash      */
 
-
 /*
  * Internal Definitions
  *
diff --git a/include/configs/EBONY.h b/include/configs/ebony.h
index 46e729f15d..ebd0b535b4 100644
--- a/include/configs/EBONY.h
+++ b/include/configs/ebony.h
@@ -36,20 +36,31 @@
 #undef	CFG_DRAM_TEST			    /* Disable-takes long time! */
 #define CONFIG_SYS_CLK_FREQ	33333333    /* external freq to pll	*/
 
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#endif
+
 /*-----------------------------------------------------------------------
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  *----------------------------------------------------------------------*/
 #define CFG_SDRAM_BASE	    0x00000000	    /* _must_ be 0		*/
 #define CFG_FLASH_BASE	    0xff800000	    /* start of FLASH		*/
-#define CFG_MONITOR_BASE    0xfff80000	    /* start of monitor		*/
+#define CFG_MONITOR_BASE    0xfffc0000	    /* start of monitor		*/
 #define CFG_PCI_MEMBASE	    0x80000000	    /* mapped pci memory	*/
 #define CFG_PERIPHERAL_BASE 0xe0000000	    /* internal peripherals	*/
 #define CFG_ISRAM_BASE	    0xc0000000	    /* internal SRAM		*/
 #define CFG_PCI_BASE	    0xd0000000	    /* internal PCI regs	*/
 
-#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
 #define CFG_NVRAM_BASE_ADDR (CFG_PERIPHERAL_BASE + 0x08000000)
+#define CFG_FPGA_BASE	    (CFG_PERIPHERAL_BASE + 0x08300000)
 
 /*-----------------------------------------------------------------------
  * Initial RAM & stack pointer (placed in internal SRAM)
@@ -69,7 +80,7 @@
  *----------------------------------------------------------------------*/
 #undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #define CFG_EXT_SERIAL_CLOCK	(1843200 * 6)	/* Ext clk @ 11.059 MHz */
-#define CONFIG_BAUDRATE		9600
+#define CONFIG_BAUDRATE		115200
 
 #define CFG_BAUDRATE_TABLE  \
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400}
@@ -87,16 +98,37 @@
 #define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
 #define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
 
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CFG_ENV_ADDR		\
+	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
 #define CFG_MAX_FLASH_BANKS	3		    /* number of banks	    */
 #define CFG_MAX_FLASH_SECT	32		    /* sectors per device   */
 
-#undef	CFG_FLASH_CHECKSUM
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
@@ -112,22 +144,47 @@
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
 
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=ebony\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/ebony/uImage\0"				\
+	"kernel_addr=ff800000\0"					\
+	"ramdisk_addr=ff810000\0"					\
+	"load=tftp 100000 /tftpboot/ebony/u-boot.bin\0"		        \
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
 
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
-#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
-
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
-#define CONFIG_BOOTDELAY	-1		    /* disable autoboot */
-#define CONFIG_BAUDRATE		9600
+#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -135,16 +192,22 @@
 #define CONFIG_MII		1	/* MII PHY management		*/
 #define CONFIG_PHY_ADDR		8	/* PHY address			*/
 
-
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_I2C	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_ELF	)
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -173,6 +236,12 @@
 
 #define CFG_HZ		1000		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
@@ -188,7 +257,7 @@
 #define CFG_PCI_PRE_INIT                /* enable board pci_pre_init()  */
 #define CFG_PCI_TARGET_INIT	            /* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014  /* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe  /* Whatever */
 
 /*
diff --git a/include/configs/OCOTEA.h b/include/configs/ocotea.h
index 5e78b45dc4..4f90b1b51d 100644
--- a/include/configs/OCOTEA.h
+++ b/include/configs/ocotea.h
@@ -1,6 +1,9 @@
 /*
  * (C) Copyright 2004 Paul Reynolds <PaulReynolds@lhsolutions.com>
  *
+ * (C) Copyright 2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
+ *
  * See file CREDITS for list of people who contributed to this
  * project.
  *
@@ -85,6 +88,21 @@
     {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200}
 
 /*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#endif
+
+
+/*-----------------------------------------------------------------------
  * NVRAM/RTC
  *
  * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located.
@@ -97,6 +115,12 @@
 #define CFG_NVRAM_SIZE	    (0x2000 - 8)    /* NVRAM size(8k)- RTC regs */
 #define CONFIG_RTC_DS174x	1		    /* DS1743 RTC		*/
 
+#ifdef CFG_ENV_IS_IN_NVRAM
+#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
+#define CFG_ENV_ADDR		\
+	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_NVRAM */
+
 /*-----------------------------------------------------------------------
  * FLASH related
  *----------------------------------------------------------------------*/
@@ -107,6 +131,20 @@
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
+#ifdef CFG_ENV_IS_IN_FLASH
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * DDR SDRAM
  *----------------------------------------------------------------------*/
@@ -122,22 +160,46 @@
 #define CFG_I2C_SLAVE		0x7F
 #define CFG_I2C_NOPROBES    {0x69}  /* Don't probe these addrs */
 
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=ocotea\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/ocotea/uImage\0"				\
+	"kernel_addr=fff00000\0"					\
+	"ramdisk_addr=fff10000\0"					\
+	"load=tftp 100000 /tftpboot/ocotea/u-boot.bin\0"		\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run flash_self"
+
+#if 0
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
+#else
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
+#endif
 
-/*-----------------------------------------------------------------------
- * Environment
- *----------------------------------------------------------------------*/
-#define CFG_ENV_IS_IN_NVRAM	1	    /* Environment uses NVRAM	*/
-#undef	CFG_ENV_IS_IN_FLASH		    /* ... not in flash		*/
-#undef	CFG_ENV_IS_IN_EEPROM		    /* ... not in EEPROM	*/
-#define CONFIG_ENV_OVERWRITE	1
-
-#define CFG_ENV_SIZE		0x1000	    /* Size of Environment vars */
-#define CFG_ENV_ADDR		\
-	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)
-
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000"    /* autoboot command */
-#define CONFIG_BOOTDELAY	-1		    /* disable autoboot */
 #define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
@@ -151,32 +213,22 @@
 #define CONFIG_PHY3_ADDR	0x18
 #define CONFIG_CIS8201_PHY	1	/* Enable 'special' RGMII mode for Cicada phy */
 #define CONFIG_PHY_GIGE		1	/* Include GbE speed/duplex detection */
-#define CONFIG_NETMASK		255.255.255.0
-#define CONFIG_IPADDR		10.1.2.3
-#define CONFIG_ETHADDR		00:04:AC:E3:28:8A
-#define CONFIG_HAS_ETH1
-#define CONFIG_ETH1ADDR		00:04:AC:E3:28:8B
-#define CONFIG_HAS_ETH2
-#define CONFIG_ETH2ADDR		00:04:AC:E3:28:8C
-#define CONFIG_HAS_ETH3
-#define CONFIG_ETH3ADDR		00:04:AC:E3:28:8D
-#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
-#define CONFIG_SERVERIP		10.1.2.2
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_BEDBUG	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
 				CFG_CMD_DHCP	| \
 				CFG_CMD_DIAG	| \
 				CFG_CMD_ELF	| \
 				CFG_CMD_I2C	| \
 				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
 				CFG_CMD_MII	| \
 				CFG_CMD_NET	| \
 				CFG_CMD_NFS	| \
 				CFG_CMD_PCI	| \
 				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
 				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
@@ -206,22 +258,28 @@
 
 #define CFG_HZ		100		/* decrementer freq: 1 ms ticks */
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	32	  /* Number of ethernet rx buffers & descriptors */
 
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
  */
 /* General PCI */
-#define CONFIG_PCI				    /* include pci support		*/
-#define CONFIG_PCI_PNP				/* do pci plug-and-play		*/
+#define CONFIG_PCI			/* include pci support		*/
+#define CONFIG_PCI_PNP			/* do pci plug-and-play		*/
 #define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 #define CFG_PCI_TARGBASE    0x80000000	/* PCIaddr mapped to CFG_PCI_MEMBASE */
 
 /* Board-specific PCI */
 #define CFG_PCI_PRE_INIT		/* enable board pci_pre_init()	*/
-#define CFG_PCI_TARGET_INIT		    /* let board init pci target    */
+#define CFG_PCI_TARGET_INIT		/* let board init pci target    */
 
-#define CFG_PCI_SUBSYS_VENDORID 0x1014	/* IBM */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
 #define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 
 /*
@@ -233,7 +291,7 @@
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_DCACHE_SIZE		32768	/* For IBM 440 CPUs			*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
diff --git a/include/configs/WALNUT405.h b/include/configs/walnut.h
index 9155ce84e0..ac5b530934 100644
--- a/include/configs/WALNUT405.h
+++ b/include/configs/walnut.h
@@ -1,6 +1,6 @@
 /*
- * (C) Copyright 2000, 2001
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
+ * (C) Copyright 2000-2005
+ * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
  * See file CREDITS for list of people who contributed to this
  * project.
@@ -35,51 +35,54 @@
 
 #define CONFIG_405GP		1	/* This is a PPC405 CPU		*/
 #define CONFIG_4xx		1	/* ...member of PPC4xx family   */
-#define CONFIG_WALNUT405	1	/* ...on a WALNUT405 board	*/
+#define CONFIG_WALNUT	        1	/* ...on a WALNUT board	        */
+                                   	/* ...and on a SYCAMORE board   */
 
 #define CONFIG_BOARD_EARLY_INIT_F 1	/* Call board_early_init_f	*/
 
 #define CONFIG_SYS_CLK_FREQ     33333333 /* external frequency to pll   */
 
-/*#define CFG_ENV_IS_IN_FLASH     1*/	/* use FLASH for environment vars	*/
-#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#define CONFIG_PREBOOT	"echo;"	\
+	"echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
+	"echo"
+
+#undef	CONFIG_BOOTARGS
+
+#define	CONFIG_EXTRA_ENV_SETTINGS					\
+	"netdev=eth0\0"							\
+	"hostname=walnut\0"						\
+	"nfsargs=setenv bootargs root=/dev/nfs rw "			\
+		"nfsroot=$(serverip):$(rootpath)\0"			\
+	"ramargs=setenv bootargs root=/dev/ram rw\0"			\
+	"addip=setenv bootargs $(bootargs) "				\
+		"ip=$(ipaddr):$(serverip):$(gatewayip):$(netmask)"	\
+		":$(hostname):$(netdev):off panic=1\0"			\
+	"addtty=setenv bootargs $(bootargs) console=ttyS0,$(baudrate)\0"\
+	"flash_nfs=run nfsargs addip addtty;"				\
+		"bootm $(kernel_addr)\0"				\
+	"flash_self=run ramargs addip addtty;"				\
+		"bootm $(kernel_addr) $(ramdisk_addr)\0"		\
+	"net_nfs=tftp 200000 $(bootfile);run nfsargs addip addtty;"     \
+	        "bootm\0"						\
+	"rootpath=/opt/eldk/ppc_4xx\0"					\
+	"bootfile=/tftpboot/walnut/uImage\0"				\
+	"kernel_addr=fff80000\0"					\
+	"ramdisk_addr=fff80000\0"					\
+	"load=tftp 100000 /tftpboot/walnut/u-boot.bin\0"		\
+	"update=protect off fffc0000 ffffffff;era fffc0000 ffffffff;"	\
+		"cp.b 100000 fffc0000 40000;"			        \
+		"setenv filesize;saveenv\0"				\
+	"upd=run load;run update\0"					\
+	""
+#define CONFIG_BOOTCOMMAND	"run net_nfs"
 
-#ifdef CFG_ENV_IS_IN_NVRAM
-#undef CFG_ENV_IS_IN_FLASH
-#else
-#ifdef CFG_ENV_IS_IN_FLASH
-#undef CFG_ENV_IS_IN_NVRAM
-#endif
-#endif
-
-#define CONFIG_BAUDRATE		9600
-#define CONFIG_BOOTDELAY	3	/* autoboot after 3 seconds	*/
-
-#if 1
-#define CONFIG_BOOTCOMMAND	"bootm ffc00000" /* autoboot command	*/
-#else
-#define CONFIG_BOOTCOMMAND	"bootp" /* autoboot command		*/
-#endif
-
-/* Size (bytes) of interrupt driven serial port buffer.
- * Set to 0 to use polling instead of interrupts.
- * Setting to 0 will also disable RTS/CTS handshaking.
- */
 #if 0
-#define CONFIG_SERIAL_SOFTWARE_FIFO 4000
+#define CONFIG_BOOTDELAY	-1	/* autoboot disabled		*/
 #else
-#undef	CONFIG_SERIAL_SOFTWARE_FIFO
+#define CONFIG_BOOTDELAY	5	/* autoboot after 5 seconds	*/
 #endif
 
-#if 0
-#define CONFIG_BOOTARGS		"root=/dev/nfs "                        \
-    "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0 "        \
-    "nfsroot=192.168.2.190:/home/stefan/cpci405/target_ftest4"
-#else
-#define CONFIG_BOOTARGS		"root=/dev/hda1 "			\
-   "ip=192.168.2.176:192.168.2.190:192.168.2.79:255.255.255.0"
-
-#endif
+#define CONFIG_BAUDRATE		115200
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download	*/
 #define CFG_LOADS_BAUD_CHANGE	1	/* allow baudrate change	*/
@@ -90,13 +93,21 @@
 #define CONFIG_RTC_DS174x	1	/* use DS1743 RTC in Walnut	*/
 
 #define CONFIG_COMMANDS	       (CONFIG_CMD_DFL	| \
-				CFG_CMD_PCI	| \
-				CFG_CMD_IRQ	| \
-				CFG_CMD_KGDB	| \
-				CFG_CMD_DHCP	| \
+				CFG_CMD_ASKENV	| \
 				CFG_CMD_DATE	| \
-				CFG_CMD_BEDBUG	| \
-				CFG_CMD_ELF	)
+				CFG_CMD_DHCP	| \
+				CFG_CMD_DIAG	| \
+				CFG_CMD_ELF	| \
+				CFG_CMD_I2C	| \
+				CFG_CMD_IRQ	| \
+				CFG_CMD_MII	| \
+				CFG_CMD_NET	| \
+				CFG_CMD_NFS	| \
+				CFG_CMD_PCI	| \
+				CFG_CMD_PING	| \
+				CFG_CMD_REGINFO	| \
+				CFG_CMD_SDRAM	| \
+				CFG_CMD_SNTP	)
 
 /* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
 #include <cmd_confdefs.h>
@@ -131,6 +142,7 @@
  * If CFG_405_UART_ERRATA_59 and 200MHz CPU clock,
  * set Linux BASE_BAUD to 403200.
  */
+#undef	CONFIG_SERIAL_SOFTWARE_FIFO
 #undef  CFG_EXT_SERIAL_CLOCK           /* external serial clock */
 #undef  CFG_405_UART_ERRATA_59         /* 405GP/CR Rev. D silicon */
 #define CFG_BASE_BAUD       691200
@@ -144,12 +156,22 @@
 
 #define	CFG_HZ		1000		/* decrementer freq: 1 ms ticks	*/
 
+#define CONFIG_AUTO_COMPLETE	1       /* add autocompletion support   */
+#define CONFIG_LOOPW            1       /* enable loopw command         */
+#define CONFIG_ZERO_BOOTDELAY_CHECK	/* check for keypress on bootdelay==0 */
+#define CONFIG_VERSION_VARIABLE 1	/* include version env variable */
+
+#define CFG_RX_ETH_BUFFER	16	/* use 16 rx buffer on 405 emac */
+
+/*-----------------------------------------------------------------------
+ * I2C stuff
+ *-----------------------------------------------------------------------
+ */
 #define CONFIG_HARD_I2C		1	/* I2C with hardware support	*/
 #undef  CONFIG_SOFT_I2C			/* I2C bit-banged		*/
 #define CFG_I2C_SPEED		400000	/* I2C speed and slave address	*/
 #define CFG_I2C_SLAVE		0x7F
 
-
 /*-----------------------------------------------------------------------
  * PCI stuff
  *-----------------------------------------------------------------------
@@ -162,9 +184,10 @@
 #define CONFIG_PCI_HOST	PCI_HOST_FORCE  /* select pci host function     */
 #define CONFIG_PCI_PNP			/* do pci plug-and-play         */
 					/* resource configuration       */
+#define CONFIG_PCI_SCAN_SHOW		/* show pci devices on startup	*/
 
-#define CFG_PCI_SUBSYS_VENDORID 0x0000  /* PCI Vendor ID: to-do!!!      */
-#define CFG_PCI_SUBSYS_DEVICEID 0x0000  /* PCI Device ID: to-do!!!      */
+#define CFG_PCI_SUBSYS_VENDORID 0x10e8	/* AMCC */
+#define CFG_PCI_SUBSYS_DEVICEID 0xcafe	/* Whatever */
 #define CFG_PCI_PTM1LA  0x00000000      /* point to sdram               */
 #define CFG_PCI_PTM1MS  0x80000001      /* 2GB, enable hard-wired to 1  */
 #define CFG_PCI_PTM1PCI 0x00000000      /* Host: use this pci address   */
@@ -173,26 +196,26 @@
 #define CFG_PCI_PTM2PCI 0x04000000      /* Host: use this pci address   */
 
 /*-----------------------------------------------------------------------
- * External peripheral base address
- *-----------------------------------------------------------------------
- */
-#undef  CONFIG_IDE_LED                  /* no led for ide supported     */
-#undef  CONFIG_IDE_RESET                /* no reset for ide supported   */
-
-#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
-#define	CFG_IR_REG_BASE_ADDR	0xF0200000
-#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
-
-/*-----------------------------------------------------------------------
  * Start addresses for the final memory configuration
  * (Set up by the startup code)
  * Please note that CFG_SDRAM_BASE _must_ start at 0
  */
 #define CFG_SDRAM_BASE		0x00000000
 #define CFG_FLASH_BASE		0xFFF80000
-#define CFG_MONITOR_BASE	CFG_FLASH_BASE
 #define CFG_MONITOR_LEN		(256 * 1024)	/* Reserve 256 kB for Monitor	*/
 #define CFG_MALLOC_LEN		(128 * 1024)	/* Reserve 128 kB for malloc()	*/
+#define CFG_MONITOR_BASE	(-CFG_MONITOR_LEN)
+
+/*
+ * Define here the location of the environment variables (FLASH or NVRAM).
+ * Note: DENX encourages to use redundant environment in FLASH. NVRAM is only
+ *       supported for backward compatibility.
+ */
+#if 1
+#define CFG_ENV_IS_IN_FLASH     1	/* use FLASH for environment vars	*/
+#else
+#define CFG_ENV_IS_IN_NVRAM	1	/* use NVRAM for environment vars	*/
+#endif
 
 /*
  * For booting Linux, the board info and command line data
@@ -200,22 +223,35 @@
  * the maximum mapped by the Linux kernel during initialization.
  */
 #define CFG_BOOTMAPSZ		(8 << 20)	/* Initial Memory map for Linux */
+
 /*-----------------------------------------------------------------------
  * FLASH organization
  */
+#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	        */
+#define FLASH_BASE1_PRELIM	0	        /* FLASH bank #1	        */
+
 #define CFG_MAX_FLASH_BANKS	1	/* max number of memory banks		*/
 #define CFG_MAX_FLASH_SECT	256	/* max number of sectors on one chip	*/
 
 #define CFG_FLASH_ERASE_TOUT	120000	/* Timeout for Flash Erase (in ms)	*/
 #define CFG_FLASH_WRITE_TOUT	500	/* Timeout for Flash Write (in ms)	*/
 
-/* BEG ENVIRONNEMENT FLASH */
+#define CFG_FLASH_EMPTY_INFO		/* print 'E' for empty sector on flinfo */
+
+#define CFG_FLASH_ADDR0         0x5555
+#define CFG_FLASH_ADDR1         0x2aaa
+#define CFG_FLASH_WORD_SIZE     unsigned char
+
 #ifdef CFG_ENV_IS_IN_FLASH
-#define CFG_ENV_OFFSET		0x00050000 /* Offset of Environment Sector  */
-#define	CFG_ENV_SIZE		0x10000	/* Total Size of Environment Sector	*/
-#define CFG_ENV_SECT_SIZE	0x10000	/* see README - env sector total size	*/
-#endif
-/* END ENVIRONNEMENT FLASH */
+#define CFG_ENV_SECT_SIZE	0x10000 	/* size of one complete sector	*/
+#define CFG_ENV_ADDR		(CFG_MONITOR_BASE-CFG_ENV_SECT_SIZE)
+#define	CFG_ENV_SIZE		0x4000	/* Total Size of Environment Sector	*/
+
+/* Address and size of Redundant Environment Sector	*/
+#define CFG_ENV_ADDR_REDUND	(CFG_ENV_ADDR-CFG_ENV_SECT_SIZE)
+#define CFG_ENV_SIZE_REDUND	(CFG_ENV_SIZE)
+#endif /* CFG_ENV_IS_IN_FLASH */
+
 /*-----------------------------------------------------------------------
  * NVRAM organization
  */
@@ -227,30 +263,47 @@
 #define CFG_ENV_ADDR		\
 	(CFG_NVRAM_BASE_ADDR+CFG_NVRAM_SIZE-CFG_ENV_SIZE)	/* Env	*/
 #endif
+
 /*-----------------------------------------------------------------------
  * Cache Configuration
  */
-#define CFG_DCACHE_SIZE		8192	/* For IBM 405 CPUs			*/
+#define CFG_DCACHE_SIZE		16384	/* For IBM 405 CPUs, older 405 ppc's	*/
+					/* have only 8kB, 16kB is save here	*/
 #define CFG_CACHELINE_SIZE	32	/* ...			*/
 #if (CONFIG_COMMANDS & CFG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT	5	/* log base 2 of the above value	*/
 #endif
 
-/*
- * Init Memory Controller:
- *
- * BR0/1 and OR0/1 (FLASH)
+/*-----------------------------------------------------------------------
+ * External Bus Controller (EBC) Setup
  */
 
-#define FLASH_BASE0_PRELIM	CFG_FLASH_BASE	/* FLASH bank #0	*/
-#define FLASH_BASE1_PRELIM	0		/* FLASH bank #1	*/
+/* Memory Bank 0 (Flash Bank 0) initialization					*/
+#define CFG_EBC_PB0AP		0x9B015480
+#define CFG_EBC_PB0CR		0xFFF18000  /* BAS=0xFFF,BS=1MB,BU=R/W,BW=8bit  */
+
+#define CFG_EBC_PB1AP		0x02815480
+#define CFG_EBC_PB1CR		0xF0018000  /* BAS=0xF00,BS=1MB,BU=R/W,BW=8bit  */
+
+#define CFG_EBC_PB2AP		0x04815A80
+#define CFG_EBC_PB2CR		0xF0118000  /* BAS=0xF01,BS=1MB,BU=R/W,BW=8bit  */
 
+#define CFG_EBC_PB3AP		0x01815280
+#define CFG_EBC_PB3CR		0xF0218000  /* BAS=0xF02,BS=1MB,BU=R/W,BW=8bit  */
 
-/* Configuration Port location */
-#define CONFIG_PORT_ADDR	0xF0000500
+#define CFG_EBC_PB7AP		0x01815280
+#define CFG_EBC_PB7CR		0xF0318000  /* BAS=0xF03,BS=1MB,BU=R/W,BW=8bit  */
+
+/*-----------------------------------------------------------------------
+ * External peripheral base address
+ *-----------------------------------------------------------------------
+ */
+#define	CFG_KEY_REG_BASE_ADDR	0xF0100000
+#define	CFG_IR_REG_BASE_ADDR	0xF0200000
+#define	CFG_FPGA_REG_BASE_ADDR	0xF0300000
 
 /*-----------------------------------------------------------------------
- * Definitions for initial stack pointer and data area (in DPRAM)
+ * Definitions for initial stack pointer and data area
  */
 #define CFG_INIT_DCACHE_CS      4       /* use cs # 4 for data cache memory    */