diff options
| author | Tom Rini <trini@konsulko.com> | 2019-08-12 23:03:44 -0400 |
|---|---|---|
| committer | Tom Rini <trini@konsulko.com> | 2019-08-12 23:03:44 -0400 |
| commit | 88c7a0a8c2ce6b503ff5d5509effb2a9f844993e (patch) | |
| tree | e3c57d6e9c0cdeb438ba8f96c19f93fe14336654 | |
| parent | 60f38d82c45fef55ac04ee52b234e6dd07e31935 (diff) | |
| parent | 193a1e9f196b7fb7e913a70936c8a49060a1859c (diff) | |
| download | u-boot-88c7a0a8c2ce6b503ff5d5509effb2a9f844993e.tar.gz u-boot-88c7a0a8c2ce6b503ff5d5509effb2a9f844993e.tar.xz u-boot-88c7a0a8c2ce6b503ff5d5509effb2a9f844993e.zip | |
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell
- Various improvements to Keymile boards - mostly DT conversation
(Pascal & Holger)
- Removal of now unsupported Keymile boards (Pascal & Holger)
- Small MVEBU PCI fix (Marek)
- Turris Omnia defconfig update (Marek)
- Misc Allied Telesis defconfig updates (Chris)
33 files changed, 554 insertions, 1020 deletions
diff --git a/arch/arm/dts/kirkwood-km_common.dtsi b/arch/arm/dts/kirkwood-km_common.dtsi index 75dc83914f..9d0fc51c2d 100644 --- a/arch/arm/dts/kirkwood-km_common.dtsi +++ b/arch/arm/dts/kirkwood-km_common.dtsi @@ -22,6 +22,7 @@ serial@12000 { status = "okay"; + clock-frequency = <200000000>; }; }; diff --git a/arch/powerpc/cpu/mpc83xx/Kconfig b/arch/powerpc/cpu/mpc83xx/Kconfig index 3f68b6f645..72053ceab4 100644 --- a/arch/powerpc/cpu/mpc83xx/Kconfig +++ b/arch/powerpc/cpu/mpc83xx/Kconfig @@ -110,10 +110,6 @@ config TARGET_SUVD3 bool "Support suvd3" select VENDOR_KM -config TARGET_KMVECT1 - bool "Support kmvect1" - select VENDOR_KM - config TARGET_KMTEGR1 bool "Support kmtegr1" select VENDOR_KM diff --git a/board/keymile/Kconfig b/board/keymile/Kconfig index e30d64818c..acaa9289f7 100644 --- a/board/keymile/Kconfig +++ b/board/keymile/Kconfig @@ -9,8 +9,109 @@ config VENDOR_KM if VENDOR_KM +menu "KM Board Setup" + +config KM_PNVRAM + hex "Pseudo RAM" + default 0x80000 + help + Start address of the pseudo non-volatile RAM for application. + +config KM_PHRAM + hex "Physical RAM" + default 0x17F000 if ARM + default 0x100000 if PPC + help + Start address of the physical RAM, which is the mounted /var folder. + +config KM_RESERVED_PRAM + hex "Reserved RAM" + default 0x801000 if KIRKWOOD + default 0x0 if MPC83xx + default 0x1000 if MPC85xx + help + Reserved physical RAM area at the end of memory for special purposes. + +config KM_CRAMFS_ADDR + hex "CRAMFS Address" + default 0x2400000 if KIRKWOOD + default 0xC00000 if MPC83xx + default 0x2000000 if MPC85xx + help + Start address of the CRAMFS containing the Linux kernel. + +config KM_KERNEL_ADDR + hex "Kernel Load Address" + default 0x2000000 if KIRKWOOD + default 0x400000 if MPC83xx + default 0x1000000 if MPC85xx + help + Address where to load Linux kernel in RAM. + +config KM_FDT_ADDR + hex "FDT Load Address" + default 0x23E0000 if KIRKWOOD + default 0xB80000 if MPC83xx + default 0x1F80000 if MPC85xx + help + Address where to load flattened device tree in RAM. + +config KM_CONSOLE_TTY + string "KM Console" + default "ttyS0" + help + TTY console to use on board. + +config KM_COMMON_ETH_INIT + bool "Common Ethernet Initialization" + default y if KIRKWOOD || MPC83xx + default n if MPC85xx + help + Use the Ethernet initialization implemented in common code, which + detects if a Piggy board is present. + +config PIGGY_MAC_ADRESS_OFFSET + int "Piggy Address Offset" + default 0 + help + MAC address offset for the Piggy board. + +config KM_MVEXTSW_ADDR + hex "Marvell Switch Address" + depends on MV88E6352_SWITCH + default 0x10 + help + Address of external Marvell switch. + +config KM_IVM_BUS + int "IVM I2C Bus" + default 1 if KIRKWOOD || MPC85xx + default 2 if MPC83xx + help + Identifier number of I2C bus, where the inventory EEPROM is connected to. + +config SYS_IVM_EEPROM_ADR + hex "IVM I2C Address" + default 0x50 + help + I2C address of the EEPROM containing the inventory. + +config SYS_IVM_EEPROM_MAX_LEN + hex "IVM Length" + default 0x400 + help + Maximum length of inventory in EEPROM. + +config SYS_IVM_EEPROM_PAGE_LEN + hex "IVM Page Size" + default 0x100 + help + Page size of inventory in EEPROM. + source "board/keymile/km83xx/Kconfig" source "board/keymile/kmp204x/Kconfig" source "board/keymile/km_arm/Kconfig" +endmenu + endif diff --git a/board/keymile/common/common.h b/board/keymile/common/common.h index 859d9130a9..42b760dc6e 100644 --- a/board/keymile/common/common.h +++ b/board/keymile/common/common.h @@ -120,10 +120,6 @@ struct bfticu_iomap { u8 pb_dbug; }; -#if !defined(CONFIG_PIGGY_MAC_ADRESS_OFFSET) -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 0 -#endif - int ethernet_present(void); int ivm_read_eeprom(unsigned char *buf, int len); int ivm_analyze_eeprom(unsigned char *buf, int len); diff --git a/board/keymile/common/ivm.c b/board/keymile/common/ivm.c index da0634f01b..50df44d1c1 100644 --- a/board/keymile/common/ivm.c +++ b/board/keymile/common/ivm.c @@ -311,11 +311,6 @@ static int ivm_populate_env(unsigned char *buf, int len) /* if an offset is defined, add it */ process_mac(valbuf, page2, CONFIG_PIGGY_MAC_ADRESS_OFFSET, true); env_set((char *)"ethaddr", (char *)valbuf); -#ifdef CONFIG_KMVECT1 -/* KMVECT1 has two ethernet interfaces */ - process_mac(valbuf, page2, 1, true); - env_set((char *)"eth1addr", (char *)valbuf); -#endif #else /* KMTEGR1 has a special setup. eth0 has no connection to the outside and * gets an locally administred MAC address, eth1 is the debug interface and diff --git a/board/keymile/km83xx/Kconfig b/board/keymile/km83xx/Kconfig index 0a41be57f5..1011cc8b2c 100644 --- a/board/keymile/km83xx/Kconfig +++ b/board/keymile/km83xx/Kconfig @@ -38,25 +38,6 @@ config BOARD_SPECIFIC_OPTIONS # dummy endif -if TARGET_KMVECT1 - -config SYS_BOARD - default "km83xx" - -config SYS_VENDOR - default "keymile" - -config SYS_CONFIG_NAME - default "kmvect1" - -config BOARD_SPECIFIC_OPTIONS # dummy - def_bool y - select ARCH_MPC8309 - imply CMD_CRAMFS - imply FS_CRAMFS - -endif - if TARGET_KMTEGR1 config SYS_BOARD diff --git a/board/keymile/km83xx/MAINTAINERS b/board/keymile/km83xx/MAINTAINERS index 94e0d572e2..d2af983073 100644 --- a/board/keymile/km83xx/MAINTAINERS +++ b/board/keymile/km83xx/MAINTAINERS @@ -10,7 +10,6 @@ F: configs/kmopti2_defconfig F: configs/kmtepr2_defconfig F: include/configs/suvd3.h F: configs/kmtegr1_defconfig -F: configs/kmvect1_defconfig F: configs/suvd3_defconfig F: configs/tuge1_defconfig F: configs/tuxx1_defconfig diff --git a/board/keymile/km83xx/km83xx.c b/board/keymile/km83xx/km83xx.c index 51778368d9..8846b64f7d 100644 --- a/board/keymile/km83xx/km83xx.c +++ b/board/keymile/km83xx/km83xx.c @@ -125,19 +125,10 @@ static int piggy_present(void) return in_8(&base->bprth) & PIGGY_PRESENT; } -#if defined(CONFIG_KMVECT1) -int ethernet_present(void) -{ - /* ethernet port connected to simple switch without piggy */ - return 1; -} -#else int ethernet_present(void) { return piggy_present(); } -#endif - int board_early_init_r(void) { @@ -198,80 +189,8 @@ int misc_init_r(void) return 0; } -#if defined(CONFIG_KMVECT1) -#include <mv88e6352.h> -/* Marvell MV88E6122 switch configuration */ -static struct mv88e_sw_reg extsw_conf[] = { - /* port 1, FRONT_MDI, autoneg */ - { PORT(1), PORT_PHY, NO_SPEED_FOR }, - { PORT(1), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - { PHY(1), PHY_1000_CTRL, NO_ADV }, - { PHY(1), PHY_SPEC_CTRL, AUTO_MDIX_EN }, - { PHY(1), PHY_CTRL, PHY_100_MBPS | AUTONEG_EN | AUTONEG_RST | - FULL_DUPLEX }, - /* port 2, unused */ - { PORT(2), PORT_CTRL, PORT_DIS }, - { PHY(2), PHY_CTRL, PHY_PWR_DOWN }, - { PHY(2), PHY_SPEC_CTRL, SPEC_PWR_DOWN }, - /* port 3, BP_MII (CPU), PHY mode, 100BASE */ - { PORT(3), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* port 4, ESTAR to slot 11, SerDes, 1000BASE-X */ - { PORT(4), PORT_STATUS, NO_PHY_DETECT }, - { PORT(4), PORT_PHY, SPEED_1000_FOR }, - { PORT(4), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* port 5, ESTAR to slot 13, SerDes, 1000BASE-X */ - { PORT(5), PORT_STATUS, NO_PHY_DETECT }, - { PORT(5), PORT_PHY, SPEED_1000_FOR }, - { PORT(5), PORT_CTRL, FORWARDING | EGRS_FLD_ALL }, - /* - * Errata Fix: 1.9V Output from Internal 1.8V Regulator, - * acc . MV-S300889-00D.pdf , clause 4.5 - */ - { PORT(5), 0x1A, 0xADB1 }, - /* port 6, unused, this port has no phy */ - { PORT(6), PORT_CTRL, PORT_DIS }, - /* - * Errata Fix: 1.9V Output from Internal 1.8V Regulator, - * acc . MV-S300889-00D.pdf , clause 4.5 - */ - { PORT(5), 0x1A, 0xADB1 }, -}; -#endif - int last_stage_init(void) { -#if defined(CONFIG_KMVECT1) - struct km_bec_fpga __iomem *base = - (struct km_bec_fpga __iomem *)CONFIG_SYS_KMBEC_FPGA_BASE; - u8 tmp_reg; - - /* Release mv88e6122 from reset */ - tmp_reg = in_8(&base->res1[0]) | 0x10; /* DIRECT3 register */ - out_8(&base->res1[0], tmp_reg); /* GP28 as output */ - tmp_reg = in_8(&base->gprt3) | 0x10; /* GP28 to high */ - out_8(&base->gprt3, tmp_reg); - - /* configure MV88E6122 switch */ - char *name = "UEC2"; - - if (miiphy_set_current_dev(name)) - return 0; - - mv88e_sw_program(name, CONFIG_KM_MVEXTSW_ADDR, extsw_conf, - ARRAY_SIZE(extsw_conf)); - - mv88e_sw_reset(name, CONFIG_KM_MVEXTSW_ADDR); - - if (piggy_present()) { - env_set("ethact", "UEC2"); - env_set("netdev", "eth1"); - puts("using PIGGY for network boot\n"); - } else { - env_set("netdev", "eth0"); - puts("using frontport for network boot\n"); - } -#endif - #if defined(CONFIG_TARGET_KMCOGE5NE) struct bfticu_iomap *base = (struct bfticu_iomap *)CONFIG_SYS_BFTIC3_BASE; diff --git a/board/keymile/km_arm/Kconfig b/board/keymile/km_arm/Kconfig index 19c1db3bc2..be6b162815 100644 --- a/board/keymile/km_arm/Kconfig +++ b/board/keymile/km_arm/Kconfig @@ -1,3 +1,32 @@ +menu "KM ARM Options" + depends on ARM + +config KM_FPGA_CONFIG + bool "FPGA Configuration" + default n + help + Include capability to change FPGA configuration. + +config KM_ENV_IS_IN_SPI_NOR + bool "Environment in SPI NOR" + default n + help + Put the U-Boot environment in the SPI NOR flash. + +config KM_PIGGY4_88E6061 + bool "Piggy via Switch 88E6061" + default n + help + The Piggy4 board is connected via a Marvell 88E6061 switch. + +config KM_PIGGY4_88E6352 + bool "Piggy via Switch 88E6352" + default n + help + The Piggy4 board is connected via a Marvell 88E6352 switch. + +endmenu + if TARGET_KM_KIRKWOOD config SYS_BOARD @@ -13,6 +42,8 @@ config BOARD_SPECIFIC_OPTIONS # dummy def_bool y select BOARD_LATE_INIT select DM + select DM_ETH + select DM_SERIAL select DM_SPI select DM_SPI_FLASH imply CMD_CRAMFS diff --git a/board/keymile/km_arm/MAINTAINERS b/board/keymile/km_arm/MAINTAINERS index d156e8574b..d80589ded7 100644 --- a/board/keymile/km_arm/MAINTAINERS +++ b/board/keymile/km_arm/MAINTAINERS @@ -11,4 +11,3 @@ F: configs/kmnusa_defconfig F: configs/kmsugp1_defconfig F: configs/kmsuv31_defconfig F: configs/mgcoge3un_defconfig -F: configs/portl2_defconfig diff --git a/board/keymile/kmp204x/MAINTAINERS b/board/keymile/kmp204x/MAINTAINERS index c5170c97e7..fb3aefdd37 100644 --- a/board/keymile/kmp204x/MAINTAINERS +++ b/board/keymile/kmp204x/MAINTAINERS @@ -4,4 +4,3 @@ S: Maintained F: board/keymile/kmp204x/ F: include/configs/kmp204x.h F: configs/kmcoge4_defconfig -F: configs/kmlion1_defconfig diff --git a/configs/SBx81LIFKW_defconfig b/configs/SBx81LIFKW_defconfig index 8cb397c757..f9ca3428a2 100644 --- a/configs/SBx81LIFKW_defconfig +++ b/configs/SBx81LIFKW_defconfig @@ -10,6 +10,7 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_I2C=y CONFIG_CMD_SF=y @@ -40,6 +41,8 @@ CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=10 CONFIG_MV88E61XX_PHY_PORTS=0x003 CONFIG_MV88E61XX_FIXED_PORTS=0x300 +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DM_RTC=y CONFIG_RTC_MV=y diff --git a/configs/SBx81LIFXCAT_defconfig b/configs/SBx81LIFXCAT_defconfig index 1f7ff812f4..a8dc9f1749 100644 --- a/configs/SBx81LIFXCAT_defconfig +++ b/configs/SBx81LIFXCAT_defconfig @@ -10,6 +10,7 @@ CONFIG_SILENT_CONSOLE=y CONFIG_SILENT_U_BOOT_ONLY=y CONFIG_MISC_INIT_R=y CONFIG_HUSH_PARSER=y +CONFIG_CMD_DM=y # CONFIG_CMD_FLASH is not set CONFIG_CMD_GPIO=y CONFIG_CMD_I2C=y @@ -44,6 +45,8 @@ CONFIG_MV88E61XX_SWITCH=y CONFIG_MV88E61XX_CPU_PORT=10 CONFIG_MV88E61XX_PHY_PORTS=0x003 CONFIG_MV88E61XX_FIXED_PORTS=0x300 +CONFIG_PHY_FIXED=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_SPI=y CONFIG_DM_SPI=y diff --git a/configs/km_kirkwood_pci_defconfig b/configs/km_kirkwood_pci_defconfig index 5abf543270..b8c8445c34 100644 --- a/configs/km_kirkwood_pci_defconfig +++ b/configs/km_kirkwood_pci_defconfig @@ -3,6 +3,7 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y +CONFIG_KM_FPGA_CONFIG=y CONFIG_IDENT_STRING="\nKeymile Kirkwood PCI" CONFIG_SYS_EXTRA_OPTIONS="KM_KIRKWOOD_PCI" CONFIG_MISC_INIT_R=y diff --git a/configs/kmcoge5un_defconfig b/configs/kmcoge5un_defconfig index b6ac31e0ff..519402ed48 100644 --- a/configs/kmcoge5un_defconfig +++ b/configs/kmcoge5un_defconfig @@ -3,6 +3,9 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y +CONFIG_PIGGY_MAC_ADRESS_OFFSET=3 +CONFIG_KM_ENV_IS_IN_SPI_NOR=y +CONFIG_KM_PIGGY4_88E6352=y CONFIG_IDENT_STRING="\nKeymile COGE5UN" CONFIG_SYS_EXTRA_OPTIONS="KM_COGE5UN" CONFIG_MISC_INIT_R=y diff --git a/configs/kmlion1_defconfig b/configs/kmlion1_defconfig deleted file mode 100644 index 6675c315ea..0000000000 --- a/configs/kmlion1_defconfig +++ /dev/null @@ -1,57 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xfff40000 -CONFIG_SYS_BOOTCOUNT_ADDR=0xFB000020 -CONFIG_MPC85xx=y -CONFIG_TARGET_KMP204X=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMLION1" -CONFIG_VERSION_VARIABLE=y -CONFIG_BOARD_EARLY_INIT_F=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_SF=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_MP=y -# CONFIG_CMD_HASH is not set -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=fsl_elbc_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=fsl_elbc_nand:-(ubi0);" -# CONFIG_CMD_IRQ is not set -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_DOS_PARTITION=y -CONFIG_ENV_IS_IN_SPI_FLASH=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_MODE=0 -CONFIG_SF_DEFAULT_SPEED=20000000 -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_PHYLIB=y -CONFIG_PHY_MARVELL=y -CONFIG_PHY_GIGE=y -CONFIG_E1000=y -CONFIG_FMAN_ENET=y -CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_FSL_ESPI=y -CONFIG_BCH=y -CONFIG_OF_LIBFDT=y diff --git a/configs/kmnusa_defconfig b/configs/kmnusa_defconfig index 08e9b7566a..1496882163 100644 --- a/configs/kmnusa_defconfig +++ b/configs/kmnusa_defconfig @@ -3,6 +3,9 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y +CONFIG_KM_FPGA_CONFIG=y +CONFIG_KM_ENV_IS_IN_SPI_NOR=y +CONFIG_KM_PIGGY4_88E6352=y CONFIG_IDENT_STRING="\nKeymile NUSA" CONFIG_SYS_EXTRA_OPTIONS="KM_NUSA" CONFIG_MISC_INIT_R=y @@ -38,6 +41,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=8100000 CONFIG_SPI_FLASH_STMICRO=y +CONFIG_MV88E6352_SWITCH=y CONFIG_MVGBE=y CONFIG_MII=y CONFIG_SYS_NS16550=y diff --git a/configs/kmsugp1_defconfig b/configs/kmsugp1_defconfig index cafc1f97cb..5da967ad2a 100644 --- a/configs/kmsugp1_defconfig +++ b/configs/kmsugp1_defconfig @@ -3,6 +3,9 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y +CONFIG_KM_FPGA_CONFIG=y +CONFIG_KM_ENV_IS_IN_SPI_NOR=y +CONFIG_KM_PIGGY4_88E6352=y CONFIG_IDENT_STRING="\nKeymile SUGP1" CONFIG_SYS_EXTRA_OPTIONS="KM_SUGP1" CONFIG_MISC_INIT_R=y @@ -38,6 +41,7 @@ CONFIG_BOOTCOUNT_BOOTLIMIT=3 CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=8100000 CONFIG_SPI_FLASH_STMICRO=y +CONFIG_MV88E6352_SWITCH=y CONFIG_MVGBE=y CONFIG_MII=y CONFIG_SYS_NS16550=y diff --git a/configs/kmsuv31_defconfig b/configs/kmsuv31_defconfig index 14c1c168f6..ced1be5c0b 100644 --- a/configs/kmsuv31_defconfig +++ b/configs/kmsuv31_defconfig @@ -3,6 +3,8 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y +CONFIG_KM_FPGA_CONFIG=y +CONFIG_KM_ENV_IS_IN_SPI_NOR=y CONFIG_IDENT_STRING="\nKeymile SUV31" CONFIG_SYS_EXTRA_OPTIONS="KM_SUV31" CONFIG_MISC_INIT_R=y diff --git a/configs/kmvect1_defconfig b/configs/kmvect1_defconfig deleted file mode 100644 index 6f2f7329a2..0000000000 --- a/configs/kmvect1_defconfig +++ /dev/null @@ -1,180 +0,0 @@ -CONFIG_PPC=y -CONFIG_SYS_TEXT_BASE=0xF0000000 -CONFIG_SYS_BOOTCOUNT_ADDR=0xE0113FF8 -CONFIG_SYS_CLK_FREQ=66000000 -CONFIG_MPC83xx=y -CONFIG_HIGH_BATS=y -CONFIG_TARGET_KMVECT1=y -CONFIG_SYSTEM_PLL_VCO_DIV_2=y -CONFIG_CORE_PLL_RATIO_2_1=y -CONFIG_QUICC_MULT_FACTOR_3=y -CONFIG_BOOT_MEMORY_SPACE_LOW=y -CONFIG_BOOT_ROM_INTERFACE_GPCM_16BIT=y -CONFIG_BAT0=y -CONFIG_BAT0_NAME="SDRAM" -CONFIG_BAT0_BASE=0x00000000 -CONFIG_BAT0_LENGTH_256_MBYTES=y -CONFIG_BAT0_ACCESS_RW=y -CONFIG_BAT0_ICACHE_INHIBITED=y -CONFIG_BAT0_ICACHE_GUARDED=y -CONFIG_BAT0_DCACHE_INHIBITED=y -CONFIG_BAT0_DCACHE_GUARDED=y -CONFIG_BAT0_USER_MODE_VALID=y -CONFIG_BAT0_SUPERVISOR_MODE_VALID=y -CONFIG_BAT1=y -CONFIG_BAT1_NAME="IMMR" -CONFIG_BAT1_BASE=0xE0000000 -CONFIG_BAT1_LENGTH_4_MBYTES=y -CONFIG_BAT1_ACCESS_RW=y -CONFIG_BAT1_ICACHE_INHIBITED=y -CONFIG_BAT1_ICACHE_GUARDED=y -CONFIG_BAT1_DCACHE_INHIBITED=y -CONFIG_BAT1_DCACHE_GUARDED=y -CONFIG_BAT1_USER_MODE_VALID=y -CONFIG_BAT1_SUPERVISOR_MODE_VALID=y -CONFIG_BAT2=y -CONFIG_BAT2_NAME="KMBEC_FPGA" -CONFIG_BAT2_BASE=0xE8000000 -CONFIG_BAT2_LENGTH_128_MBYTES=y -CONFIG_BAT2_ACCESS_RW=y -CONFIG_BAT2_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT2_DCACHE_INHIBITED=y -CONFIG_BAT2_DCACHE_GUARDED=y -CONFIG_BAT2_USER_MODE_VALID=y -CONFIG_BAT2_SUPERVISOR_MODE_VALID=y -CONFIG_BAT3=y -CONFIG_BAT3_NAME="FLASH" -CONFIG_BAT3_BASE=0xF0000000 -CONFIG_BAT3_LENGTH_256_MBYTES=y -CONFIG_BAT3_ACCESS_RW=y -CONFIG_BAT3_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT3_DCACHE_INHIBITED=y -CONFIG_BAT3_DCACHE_GUARDED=y -CONFIG_BAT3_USER_MODE_VALID=y -CONFIG_BAT3_SUPERVISOR_MODE_VALID=y -CONFIG_BAT4=y -CONFIG_BAT4_NAME="STACK_IN_DCACHE" -CONFIG_BAT4_BASE=0xE6000000 -CONFIG_BAT4_ACCESS_RW=y -CONFIG_BAT4_USER_MODE_VALID=y -CONFIG_BAT4_SUPERVISOR_MODE_VALID=y -CONFIG_BAT5=y -CONFIG_BAT5_NAME="APP1" -CONFIG_BAT5_BASE=0xA0000000 -CONFIG_BAT5_LENGTH_256_MBYTES=y -CONFIG_BAT5_ACCESS_RW=y -CONFIG_BAT5_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT5_DCACHE_INHIBITED=y -CONFIG_BAT5_DCACHE_GUARDED=y -CONFIG_BAT5_USER_MODE_VALID=y -CONFIG_BAT5_SUPERVISOR_MODE_VALID=y -CONFIG_BAT6=y -CONFIG_BAT6_NAME="APP2" -CONFIG_BAT6_BASE=0xB0000000 -CONFIG_BAT6_LENGTH_256_MBYTES=y -CONFIG_BAT6_ACCESS_RW=y -CONFIG_BAT6_ICACHE_MEMORYCOHERENCE=y -CONFIG_BAT6_DCACHE_INHIBITED=y -CONFIG_BAT6_DCACHE_GUARDED=y -CONFIG_BAT6_USER_MODE_VALID=y -CONFIG_BAT6_SUPERVISOR_MODE_VALID=y -CONFIG_LBLAW0=y -CONFIG_LBLAW0_BASE=0xF0000000 -CONFIG_LBLAW0_NAME="FLASH" -CONFIG_LBLAW0_LENGTH_256_MBYTES=y -CONFIG_LBLAW1=y -CONFIG_LBLAW1_BASE=0xE8000000 -CONFIG_LBLAW1_NAME="KMBEC_FPGA" -CONFIG_LBLAW1_LENGTH_128_MBYTES=y -CONFIG_LBLAW2=y -CONFIG_LBLAW2_BASE=0xA0000000 -CONFIG_LBLAW2_NAME="APP1" -CONFIG_LBLAW2_LENGTH_256_MBYTES=y -CONFIG_LBLAW3=y -CONFIG_LBLAW3_BASE=0xB0000000 -CONFIG_LBLAW3_NAME="APP2" -CONFIG_LBLAW3_LENGTH_256_MBYTES=y -CONFIG_ELBC_BR0_OR0=y -CONFIG_BR0_OR0_NAME="FLASH" -CONFIG_BR0_OR0_BASE=0xF0000000 -CONFIG_BR0_PORTSIZE_16BIT=y -CONFIG_OR0_AM_256_MBYTES=y -CONFIG_OR0_SCY_5=y -CONFIG_OR0_CSNT_EARLIER=y -CONFIG_OR0_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR0_TRLX_RELAXED=y -CONFIG_OR0_EAD_EXTRA=y -CONFIG_ELBC_BR1_OR1=y -CONFIG_BR1_OR1_NAME="KMBEC_FPGA" -CONFIG_BR1_OR1_BASE=0xE8000000 -CONFIG_OR1_AM_128_MBYTES=y -CONFIG_OR1_SCY_2=y -CONFIG_OR1_CSNT_EARLIER=y -CONFIG_OR1_ACS_HALF_CYCLE_EARLIER=y -CONFIG_OR1_TRLX_RELAXED=y -CONFIG_OR1_EAD_EXTRA=y -CONFIG_ELBC_BR2_OR2=y -CONFIG_BR2_OR2_NAME="APP1" -CONFIG_BR2_OR2_BASE=0xA0000000 -CONFIG_BR2_PORTSIZE_16BIT=y -CONFIG_BR2_MACHINE_UPMA=y -CONFIG_OR2_AM_256_MBYTES=y -CONFIG_ELBC_BR3_OR3=y -CONFIG_BR3_OR3_NAME="APP2" -CONFIG_BR3_OR3_BASE=0xB0000000 -CONFIG_BR3_PORTSIZE_16BIT=y -CONFIG_OR3_AM_256_MBYTES=y -CONFIG_OR3_SCY_3=y -CONFIG_OR3_CSNT_EARLIER=y -CONFIG_OR3_ACS_QUARTER_CYCLE_EARLIER=y -CONFIG_OR3_TRLX_RELAXED=y -CONFIG_HID0_FINAL_EMCP=y -CONFIG_HID0_FINAL_ICE=y -CONFIG_HID2_HBE=y -CONFIG_ACR_PIPE_DEP_4=y -CONFIG_ACR_RPTCNT_4=y -CONFIG_ACR_APARK_MASTER=y -CONFIG_ACR_PARKM_USB_I2C1_BOOT=y -CONFIG_LCRR_EADC_1=y -CONFIG_LCRR_CLKDIV_2=y -CONFIG_OF_BOARD_SETUP=y -CONFIG_OF_STDOUT_VIA_ALIAS=y -CONFIG_SYS_EXTRA_OPTIONS="KMVECT1" -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -CONFIG_BOARD_EARLY_INIT_R=y -CONFIG_LAST_STAGE_INIT=y -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_IMLS=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_I2C=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nor0=boot" -CONFIG_MTDPARTS_DEFAULT="mtdparts=boot:768k(u-boot),128k(env),128k(envred),-(ubi0);" -CONFIG_CMD_DIAG=y -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -# CONFIG_MMC is not set -CONFIG_MTD_NOR_FLASH=y -CONFIG_MTD_DEVICE=y -CONFIG_FLASH_CFI_DRIVER=y -CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y -CONFIG_FLASH_CFI_MTD=y -CONFIG_SYS_FLASH_PROTECTION=y -CONFIG_SYS_FLASH_CFI=y -# CONFIG_PCI is not set -CONFIG_QE=y -CONFIG_SYS_QE_FMAN_FW_IN_NOR=y -CONFIG_SYS_NS16550=y -CONFIG_OF_LIBFDT=y diff --git a/configs/mgcoge3un_defconfig b/configs/mgcoge3un_defconfig index 6b36cf9ce8..6dd21bcdc1 100644 --- a/configs/mgcoge3un_defconfig +++ b/configs/mgcoge3un_defconfig @@ -3,6 +3,8 @@ CONFIG_SYS_DCACHE_OFF=y CONFIG_KIRKWOOD=y CONFIG_SYS_TEXT_BASE=0x07d00000 CONFIG_TARGET_KM_KIRKWOOD=y +CONFIG_PIGGY_MAC_ADRESS_OFFSET=3 +CONFIG_KM_PIGGY4_88E6061=y CONFIG_IDENT_STRING="\nKeymile COGE3UN" CONFIG_SYS_EXTRA_OPTIONS="KM_MGCOGE3UN" CONFIG_MISC_INIT_R=y diff --git a/configs/portl2_defconfig b/configs/portl2_defconfig deleted file mode 100644 index 918d27c331..0000000000 --- a/configs/portl2_defconfig +++ /dev/null @@ -1,46 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_DCACHE_OFF=y -CONFIG_KIRKWOOD=y -CONFIG_SYS_TEXT_BASE=0x07d00000 -CONFIG_TARGET_KM_KIRKWOOD=y -CONFIG_IDENT_STRING="\nKeymile Port-L2" -CONFIG_SYS_EXTRA_OPTIONS="KM_PORTL2" -CONFIG_MISC_INIT_R=y -CONFIG_VERSION_VARIABLE=y -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_HUSH_PARSER=y -CONFIG_AUTOBOOT_KEYED=y -CONFIG_AUTOBOOT_PROMPT="Hit <SPACE> key to stop autoboot in %2ds\n" -CONFIG_AUTOBOOT_STOP_STR=" " -CONFIG_CMD_ASKENV=y -CONFIG_CMD_GREPENV=y -CONFIG_CMD_EEPROM=y -# CONFIG_CMD_FLASH is not set -CONFIG_CMD_I2C=y -CONFIG_CMD_NAND=y -CONFIG_CMD_SF=y -CONFIG_CMD_DHCP=y -CONFIG_CMD_MII=y -CONFIG_CMD_PING=y -CONFIG_CMD_JFFS2=y -CONFIG_CMD_MTDPARTS=y -CONFIG_MTDIDS_DEFAULT="nand0=orion_nand" -CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:-(ubi0);" -CONFIG_CMD_UBI=y -# CONFIG_CMD_UBIFS is not set -CONFIG_OF_CONTROL=y -CONFIG_DEFAULT_DEVICE_TREE="kirkwood-km_kirkwood" -CONFIG_ENV_IS_IN_EEPROM=y -CONFIG_BOOTCOUNT_LIMIT=y -CONFIG_BOOTCOUNT_RAM=y -CONFIG_BOOTCOUNT_BOOTLIMIT=3 -# CONFIG_MMC is not set -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=8100000 -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_MVGBE=y -CONFIG_MII=y -CONFIG_SYS_NS16550=y -CONFIG_SPI=y -CONFIG_KIRKWOOD_SPI=y -CONFIG_BCH=y diff --git a/configs/turris_omnia_defconfig b/configs/turris_omnia_defconfig index e7ece9e4b7..17740b9849 100644 --- a/configs/turris_omnia_defconfig +++ b/configs/turris_omnia_defconfig @@ -45,6 +45,8 @@ CONFIG_CMD_TIME=y CONFIG_CMD_AES=y CONFIG_CMD_HASH=y CONFIG_CMD_BTRFS=y +CONFIG_CMD_MEMTEST=y +CONFIG_SYS_ALT_MEMTEST=y # CONFIG_SPL_PARTITION_UUIDS is not set CONFIG_DEFAULT_DEVICE_TREE="armada-385-turris-omnia" CONFIG_ENV_IS_IN_SPI_FLASH=y @@ -60,6 +62,7 @@ CONFIG_DM_MMC=y CONFIG_MMC_SDHCI=y CONFIG_MMC_SDHCI_MV=y CONFIG_SPI_FLASH=y +CONFIG_SPI_FLASH_MACRONIX=y CONFIG_SPI_FLASH_SPANSION=y CONFIG_PHY_MARVELL=y CONFIG_PHY_GIGE=y diff --git a/drivers/pci/pci_mvebu.c b/drivers/pci/pci_mvebu.c index e21dc10c2f..f9b08f38a1 100644 --- a/drivers/pci/pci_mvebu.c +++ b/drivers/pci/pci_mvebu.c @@ -313,10 +313,6 @@ static int mvebu_pcie_probe(struct udevice *dev) reg |= BIT(10); /* disable interrupts */ writel(reg, pcie->base + PCIE_CMD_OFF); - /* Set BAR0 to internal registers */ - writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); - writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); - /* PCI memory space */ pci_set_region(hose->regions + 0, pcie->mem.start, pcie->mem.start, PCIE_MEM_SIZE, PCI_REGION_MEM); @@ -326,6 +322,10 @@ static int mvebu_pcie_probe(struct udevice *dev) PCI_REGION_MEM | PCI_REGION_SYS_MEMORY); hose->region_count = 2; + /* Set BAR0 to internal registers */ + writel(SOC_REGS_PHY_BASE, pcie->base + PCIE_BAR_LO_OFF(0)); + writel(0, pcie->base + PCIE_BAR_HI_OFF(0)); + bus++; return 0; diff --git a/include/configs/km/keymile-common.h b/include/configs/km/keymile-common.h index a83782e1cf..8433d8e568 100644 --- a/include/configs/km/keymile-common.h +++ b/include/configs/km/keymile-common.h @@ -7,8 +7,6 @@ #ifndef __CONFIG_KEYMILE_H #define __CONFIG_KEYMILE_H -#undef CONFIG_WATCHDOG /* disable platform specific watchdog */ - /* * Miscellaneous configurable options */ @@ -27,12 +25,6 @@ #define CONFIG_LOADS_ECHO #define CONFIG_SYS_LOADS_BAUD_CHANGE - -/* Support the IVM EEprom */ -#define CONFIG_SYS_IVM_EEPROM_ADR 0x50 -#define CONFIG_SYS_IVM_EEPROM_MAX_LEN 0x400 -#define CONFIG_SYS_IVM_EEPROM_PAGE_LEN 0x100 - /* * BOOTP options */ diff --git a/include/configs/km/km-mpc83xx.h b/include/configs/km/km-mpc83xx.h index 455e5236de..c06143c68b 100644 --- a/include/configs/km/km-mpc83xx.h +++ b/include/configs/km/km-mpc83xx.h @@ -3,8 +3,6 @@ */ #define BOOTFLASH_START 0xF0000000 -#define CONFIG_KM_CONSOLE_TTY "ttyS0" - /* * DDR Setup */ @@ -89,8 +87,6 @@ {0, {{I2C_MUX_PCA9547, 0x70, 1} } }, \ {1, {I2C_NULL_HOP} } } -#define CONFIG_KM_IVM_BUS 2 /* I2C2 (Mux-Port 1)*/ - #if defined(CONFIG_CMD_NAND) #define CONFIG_NAND_KMETER1 #define CONFIG_SYS_MAX_NAND_DEVICE 1 diff --git a/include/configs/km/km-powerpc.h b/include/configs/km/km-powerpc.h index 16b11d82a2..20b596f541 100644 --- a/include/configs/km/km-powerpc.h +++ b/include/configs/km/km-powerpc.h @@ -11,9 +11,6 @@ #define CONFIG_JFFS2_CMDLINE -/* standard km ethernet_present for piggy */ -#define CONFIG_KM_COMMON_ETH_INIT - /* EEprom support 24C08, 24C16, 24C64 */ #define CONFIG_SYS_EEPROM_PAGE_WRITE_ENABLE #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS 3 /* 8 Byte write page */ @@ -45,20 +42,10 @@ /* size of rootfs in RAM */ #define CONFIG_KM_ROOTFSSIZE 0x0 -/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x100000 -/* resereved pram area at the end of memroy [hex] */ -#define CONFIG_KM_RESERVED_PRAM 0x0 /* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable * is not valid yet, which is the case for when u-boot copies itself to RAM */ #define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10) -#define CONFIG_KM_CRAMFS_ADDR 0xC00000 -#define CONFIG_KM_KERNEL_ADDR 0x400000 /* 7680Kbytes */ -#define CONFIG_KM_FDT_ADDR 0xB80000 /* 512Kbytes */ - /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU "" diff --git a/include/configs/km/km_arm.h b/include/configs/km/km_arm.h index a381a98470..d12d18770d 100644 --- a/include/configs/km/km_arm.h +++ b/include/configs/km/km_arm.h @@ -32,8 +32,6 @@ /* include common defines/options for all Keymile boards */ #include "keymile-common.h" -/* SPI NOR Flash default params, used by sf commands */ - /* Reserve 4 MB for malloc */ #define CONFIG_SYS_MALLOC_LEN (4 * 1024 * 1024) @@ -43,15 +41,6 @@ #define CONFIG_SYS_MEMTEST_END 0x007fffff /*(_8M -1) */ #define CONFIG_SYS_LOAD_ADDR 0x00800000 /* default load adr- 8M */ -/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x17F000 - -#define CONFIG_KM_CRAMFS_ADDR 0x2400000 -#define CONFIG_KM_KERNEL_ADDR 0x2000000 /* 3098KBytes */ -#define CONFIG_KM_FDT_ADDR 0x23E0000 /* 128KBytes */ - /* architecture specific default bootargs */ #define CONFIG_KM_DEF_BOOT_ARGS_CPU \ "bootcountaddr=${bootcountaddr} ${mtdparts}" \ @@ -72,26 +61,10 @@ #define CONFIG_SKIP_LOWLEVEL_INIT /* disable board lowlevel_init */ /* - * NS16550 Configuration - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE (-4) -#define CONFIG_SYS_NS16550_CLK CONFIG_SYS_TCLK -#define CONFIG_SYS_NS16550_COM1 KW_UART0_BASE -#define CONFIG_SYS_NS16550_COM2 KW_UART1_BASE - -/* - * Serial Port configuration - * The following definitions let you select what serial you want to use - * for your console driver. - */ - -/* * For booting Linux, the board info and command line data * have to be in the first 8 MB of memory, since this is * the maximum mapped by the Linux kernel during initialization. */ -#define CONFIG_BOOTMAPSZ (8 << 20) /* Initial Memmap for Linux */ #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */ #define CONFIG_INITRD_TAG /* enable INITRD tag */ #define CONFIG_SETUP_MEMORY_TAGS /* enable memory tag */ @@ -101,30 +74,17 @@ */ #define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define BOOTFLASH_START 0x0 - -/* Kirkwood has two serial IF */ -#if (CONFIG_CONS_INDEX == 2) -#define CONFIG_KM_CONSOLE_TTY "ttyS1" -#else -#define CONFIG_KM_CONSOLE_TTY "ttyS0" -#endif - /* * Other required minimal configurations */ #define CONFIG_ARCH_CPU_INIT /* call arch_cpu_init() */ -#define CONFIG_SYS_RESET_ADDRESS 0xffff0000 /* Rst Vector Adr */ /* * Ethernet Driver configuration */ -#define CONFIG_NETCONSOLE /* include NetConsole support */ -#define CONFIG_SYS_FAULT_ECHO_LINK_DOWN /* detect link using phy */ +#define PHY_ANEG_TIMEOUT 8000 /* PHY needs a longer autoneg timeout */ #define CONFIG_MVGBE_PORTS {1, 0} /* enable port 0 only */ #define CONFIG_PHY_BASE_ADR 0 -#define CONFIG_ENV_OVERWRITE /* ethaddr can be reprogrammed */ -#define CONFIG_KM_COMMON_ETH_INIT /* standard km ethernet_present for piggy */ /* * I2C related stuff @@ -238,19 +198,9 @@ int get_scl(void); "arch=arm\0" \ "" -#if !defined(CONFIG_MTD_NOR_FLASH) -#undef CONFIG_JFFS2_CMDLINE -#endif - /* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 -/* Do early setups now in board_init_f() */ -/* - * resereved pram area at the end of memroy [hex] - * 8Mbytes for switch + 4Kbytes for bootcount - */ -#define CONFIG_KM_RESERVED_PRAM 0x801000 /* address for the bootcount (taken from end of RAM) */ #define BOOTCOUNT_ADDR (CONFIG_KM_RESERVED_PRAM) @@ -259,6 +209,4 @@ int get_scl(void); #define CONFIG_POST_SKIP_ENV_FLAGS #define CONFIG_POST_EXTERNAL_WORD_FUNCS -/* we do the whole PCIe FPGA config stuff here */ - #endif /* _CONFIG_KM_ARM_H */ diff --git a/include/configs/km/kmp204x-common.h b/include/configs/km/kmp204x-common.h deleted file mode 100644 index 3eff38017f..0000000000 --- a/include/configs/km/kmp204x-common.h +++ /dev/null @@ -1,409 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * (C) Copyright 2013 Keymile AG - * Valentin Longchamp <valentin.longchamp@keymile.com> - */ - -#ifndef _CONFIG_KMP204X_H -#define _CONFIG_KMP204X_H - -#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" - -/* an additionnal option is required for UBI as subpage access is - * supported in u-boot */ -#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" - -#define CONFIG_NAND_ECC_BCH - -/* common KM defines */ -#include "keymile-common.h" - -#define CONFIG_SYS_RAMBOOT -#define CONFIG_RAMBOOT_PBL -#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc -#define CONFIG_SYS_FSL_PBL_PBI board/keymile/kmp204x/pbi.cfg -#define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg - -/* High Level Configuration Options */ -#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ -#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ - -#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ -#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS -#define CONFIG_PCIE1 /* PCIE controller 1 */ -#define CONFIG_PCIE3 /* PCIE controller 3 */ -#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ -#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ - -#define CONFIG_SYS_DPAA_RMAN /* RMan */ - -/* Environment in SPI Flash */ -#define CONFIG_ENV_OFFSET 0x100000 /* 1MB for u-boot */ -#define CONFIG_ENV_SIZE 0x004000 /* 16K env */ -#define CONFIG_ENV_SECT_SIZE 0x010000 -#define CONFIG_ENV_OFFSET_REDUND 0x110000 -#define CONFIG_ENV_TOTAL_SIZE 0x020000 - -#define CONFIG_SYS_REDUNDAND_ENVIRONMENT - -#ifndef __ASSEMBLY__ -unsigned long get_board_sys_clk(unsigned long dummy); -#endif -#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) - -/* - * These can be toggled for performance analysis, otherwise use default. - */ -#define CONFIG_SYS_CACHE_STASHING -#define CONFIG_BACKSIDE_L2_CACHE -#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E -#define CONFIG_BTB /* toggle branch predition */ - -#define CONFIG_ENABLE_36BIT_PHYS - -#define CONFIG_ADDR_MAP -#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ - -#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS /* POST memory regions test */ - -/* - * Config the L3 Cache as L3 SRAM - */ -#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE -#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ - CONFIG_RAMBOOT_TEXT_BASE) -#define CONFIG_SYS_L3_SIZE (1024 << 10) -#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) - -#define CONFIG_SYS_DCSRBAR 0xf0000000 -#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull - -/* - * DDR Setup - */ -#define CONFIG_VERY_BIG_RAM -#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 -#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE - -#define CONFIG_DIMM_SLOTS_PER_CTLR 1 -#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) - -#define CONFIG_DDR_SPD - -#define CONFIG_SYS_SPD_BUS_NUM 0 -#define SPD_EEPROM_ADDRESS 0x54 -#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ - -#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -/****************************************************************************** - * (PRAM usage) - * ... ------------------------------------------------------- - * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM - * ... |<------------------- pram -------------------------->| - * ... ------------------------------------------------------- - * @END_OF_RAM: - * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose - * @CONFIG_KM_PHRAM: address for /var - * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) - * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM - */ - -/* size of rootfs in RAM */ -#define CONFIG_KM_ROOTFSSIZE 0x0 -/* pseudo-non volatile RAM [hex] */ -#define CONFIG_KM_PNVRAM 0x80000 -/* physical RAM MTD size [hex] */ -#define CONFIG_KM_PHRAM 0x100000 -/* reserved pram area at the end of memory [hex] - * u-boot reserves some memory for the MP boot page */ -#define CONFIG_KM_RESERVED_PRAM 0x1000 -/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable - * is not valid yet, which is the case for when u-boot copies itself to RAM */ -#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM)>>10) - -#define CONFIG_KM_CRAMFS_ADDR 0x2000000 -#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ -#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ - -/* - * Local Bus Definitions - */ - -/* Set the local bus clock 1/8 of plat clk, 2 clk delay LALE */ -#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_2) - -/* Nand Flash */ -#define CONFIG_NAND_FSL_ELBC -#define CONFIG_SYS_NAND_BASE 0xffa00000 -#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull - -#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} -#define CONFIG_SYS_MAX_NAND_DEVICE 1 -#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) - -/* NAND flash config */ -#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ - | BR_PS_8 /* Port Size = 8 bit */ \ - | BR_MS_FCM /* MSEL = FCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \ - | OR_FCM_BCTLD /* LBCTL not ass */ \ - | OR_FCM_SCY_1 /* 1 clk wait cycle */ \ - | OR_FCM_RST /* 1 clk read setup */ \ - | OR_FCM_PGS /* Large page size */ \ - | OR_FCM_CST) /* 0.25 command setup */ - -#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ -#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ - -/* QRIO FPGA */ -#define CONFIG_SYS_QRIO_BASE 0xfb000000 -#define CONFIG_SYS_QRIO_BASE_PHYS 0xffb000000ull - -#define CONFIG_SYS_QRIO_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE_PHYS) \ - | BR_PS_8 /* Port Size 8 bits */ \ - | BR_DECC_OFF /* no error corr */ \ - | BR_MS_GPCM /* MSEL = GPCM */ \ - | BR_V) /* valid */ - -#define CONFIG_SYS_QRIO_OR_PRELIM (OR_AM_64KB /* length 64K */ \ - | OR_GPCM_BCTLD /* no LCTL assert */ \ - | OR_GPCM_ACS_DIV4 /* LCS 1/4 clk after */ \ - | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \ - | OR_GPCM_TRLX /* relaxed tmgs */ \ - | OR_GPCM_EAD) /* extra bus clk cycles */ - -#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ -#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ - -#define CONFIG_MISC_INIT_F - -#define CONFIG_HWCONFIG - -/* define to use L1 as initial stack */ -#define CONFIG_L1_INIT_RAM -#define CONFIG_SYS_INIT_RAM_LOCK -#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR -/* The assembler doesn't like typecast */ -#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ - ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ - CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) -#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET - -#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE -#define CONFIG_SYS_MONITOR_LEN (768 * 1024) -#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) - -/* Serial Port - controlled on board with jumper J8 - * open - index 2 - * shorted - index 1 - */ -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0)/2) - -#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x11C500) -#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x11C600) -#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR+0x11D500) -#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR+0x11D600) - -#define CONFIG_KM_CONSOLE_TTY "ttyS0" - -/* I2C */ - -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_INIT_BOARD -#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ -#define CONFIG_SYS_NUM_I2C_BUSES 3 -#define CONFIG_SYS_I2C_MAX_HOPS 1 -#define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ -#define CONFIG_I2C_MULTI_BUS -#define CONFIG_I2C_CMD_TREE -#define CONFIG_SYS_FSL_I2C_SPEED 400000 -#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F -#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 -#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ - {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ - } -#ifndef __ASSEMBLY__ -void set_sda(int state); -void set_scl(int state); -int get_sda(void); -int get_scl(void); -#endif - -#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ - -/* - * eSPI - Enhanced SPI - */ - -/* - * General PCI - * Memory space is mapped 1-1, but I/O space must start from 0. - */ - -/* controller 1, direct to uli, tgtid 3, Base address 20000 */ -#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 -#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull -#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 -#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull -#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ - -/* controller 3, Slot 1, tgtid 1, Base address 202000 */ -#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 -#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 -#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull -#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ -#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8010000 -#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 -#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8010000ull -#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ - -/* Qman/Bman */ -#define CONFIG_SYS_BMAN_NUM_PORTALS 10 -#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 -#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull -#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE -#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ - CONFIG_SYS_BMAN_CENA_SIZE) -#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 -#define CONFIG_SYS_QMAN_NUM_PORTALS 10 -#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 -#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull -#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 -#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 -#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 -#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE -#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ - CONFIG_SYS_QMAN_CENA_SIZE) -#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) -#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 - -#define CONFIG_SYS_DPAA_FMAN -#define CONFIG_SYS_DPAA_PME -/* Default address of microcode for the Linux Fman driver - * env is stored at 0x100000, sector size is 0x10000, x2 (redundant) - * ucode is stored after env, so we got 0x120000. - */ -#define CONFIG_SYS_FMAN_FW_ADDR 0x120000 -#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 -#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) - -#define CONFIG_PHYLIB_10G - -#define CONFIG_PCI_INDIRECT_BRIDGE - -#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ - -/* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */ -#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11 -#define CONFIG_SYS_TBIPA_VALUE 8 -#define CONFIG_ETHPRIME "FM1@DTSEC5" - -/* - * Environment - */ -#define CONFIG_LOADS_ECHO /* echo on for serial download */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ - -/* - * Hardware Watchdog - */ -#define CONFIG_WATCHDOG /* enable CPU watchdog */ -#define CONFIG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) (~10min) */ -#define CONFIG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */ - - -/* - * additionnal command line configuration. - */ - -/* we don't need flash support */ -#undef CONFIG_JFFS2_CMDLINE - -/* - * For booting Linux, the board info and command line data - * have to be in the first 64 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ -#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ - -#ifdef CONFIG_CMD_KGDB -#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ -#endif - -#define __USB_PHY_TYPE utmi -#define CONFIG_USB_EHCI_FSL - -/* - * Environment Configuration - */ -#define CONFIG_ENV_OVERWRITE -#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ -#define CONFIG_KM_DEF_ENV "km-common=empty\0" -#endif - -/* architecture specific default bootargs */ -#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" - -/* FIXME: FDT_ADDR is unspecified */ -#define CONFIG_KM_DEF_ENV_CPU \ - "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ - "cramfsloadfdt=" \ - "cramfsload ${fdt_addr_r} " \ - "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ - "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ - "u-boot="CONFIG_HOSTNAME "/u-boot.pbl\0" \ - "update=" \ - "sf probe 0;sf erase 0 +${filesize};" \ - "sf write ${load_addr_r} 0 ${filesize};\0" \ - "set_fdthigh=true\0" \ - "checkfdt=true\0" \ - "" - -#define CONFIG_HW_ENV_SETTINGS \ - "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ - "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ - "usb_dr_mode=host\0" - -#define CONFIG_KM_NEW_ENV \ - "newenv=sf probe 0;" \ - "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ - __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" - -/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ -#ifndef CONFIG_KM_DEF_ARCH -#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" -#endif - -#define CONFIG_EXTRA_ENV_SETTINGS \ - CONFIG_KM_DEF_ENV \ - CONFIG_KM_DEF_ARCH \ - CONFIG_KM_NEW_ENV \ - CONFIG_HW_ENV_SETTINGS \ - "EEprom_ivm=pca9547:70:9\0" \ - "" - -#endif /* _CONFIG_KMP204X_H */ diff --git a/include/configs/km_kirkwood.h b/include/configs/km_kirkwood.h index e7b12d0dca..6fce83cfcd 100644 --- a/include/configs/km_kirkwood.h +++ b/include/configs/km_kirkwood.h @@ -24,13 +24,10 @@ #if defined(CONFIG_KM_KIRKWOOD) #define CONFIG_HOSTNAME "km_kirkwood" #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ /* KM_KIRKWOOD_PCI */ #elif defined(CONFIG_KM_KIRKWOOD_PCI) #define CONFIG_HOSTNAME "km_kirkwood_pci" -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -#define CONFIG_KM_FPGA_CONFIG #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE @@ -40,11 +37,9 @@ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ /* KM_NUSA / KM_SUGP1 */ #elif defined(CONFIG_KM_NUSA) || defined(CONFIG_KM_SUGP1) -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ # if defined(CONFIG_KM_NUSA) #define CONFIG_HOSTNAME "kmnusa" @@ -55,48 +50,27 @@ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg -#define CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_KM_FPGA_CONFIG -#define CONFIG_KM_PIGGY4_88E6352 -#define CONFIG_MV88E6352_SWITCH -#define CONFIG_KM_MVEXTSW_ADDR 0x10 /* KM_MGCOGE3UN */ #elif defined(CONFIG_KM_MGCOGE3UN) #define CONFIG_HOSTNAME "mgcoge3un" -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage-memphis.cfg #define CONFIG_KM_BOARD_EXTRA_ENV "waitforne=true\0" -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_PIGGY4_88E6061 /* KMCOGE5UN */ #elif defined(CONFIG_KM_COGE5UN) -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_256M8_1.cfg -#define CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_PIGGY_MAC_ADRESS_OFFSET 3 #define CONFIG_HOSTNAME "kmcoge5un" #define CONFIG_KM_DISABLE_PCIE -#define CONFIG_KM_PIGGY4_88E6352 - -/* KM_PORTL2 */ -#elif defined(CONFIG_KM_PORTL2) -#define CONFIG_HOSTNAME "portl2" -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ -#define CONFIG_KM_PIGGY4_88E6061 /* KM_SUV31 */ #elif defined(CONFIG_KM_SUV31) -#define CONFIG_KM_IVM_BUS 1 /* I2C2 (Mux-Port 1)*/ #define CONFIG_HOSTNAME "kmsuv31" #undef CONFIG_SYS_KWD_CONFIG #define CONFIG_SYS_KWD_CONFIG $(CONFIG_BOARDDIR)/kwbimage_128M16_1.cfg -#define CONFIG_KM_ENV_IS_IN_SPI_NOR -#define CONFIG_KM_FPGA_CONFIG #define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE #else @@ -166,7 +140,7 @@ MVGBE_SET_MII_SPEED_TO_100) #endif -#ifdef CONFIG_KM_DISABLE_PCI +#ifdef CONFIG_KM_DISABLE_PCIE #undef CONFIG_KIRKWOOD_PCIE_INIT #endif diff --git a/include/configs/kmp204x.h b/include/configs/kmp204x.h index c50026d71e..75480a8a58 100644 --- a/include/configs/kmp204x.h +++ b/include/configs/kmp204x.h @@ -7,13 +7,7 @@ #ifndef __CONFIG_H #define __CONFIG_H -/* KMLION1 */ -#if defined(CONFIG_KMLION1) -#define CONFIG_HOSTNAME "kmlion1" -#define CONFIG_KM_BOARD_NAME "kmlion1" - -/* KMCOGE4 */ -#elif defined(CONFIG_KMCOGE4) +#if defined(CONFIG_KMCOGE4) #define CONFIG_HOSTNAME "kmcoge4" #define CONFIG_KM_BOARD_NAME "kmcoge4" @@ -23,31 +17,407 @@ #define CONFIG_KMP204X -#include "km/kmp204x-common.h" +#define CONFIG_KM_DEF_NETDEV "netdev=eth0\0" + +/* an additionnal option is required for UBI as subpage access is + * supported in u-boot + */ +#define CONFIG_KM_UBI_PART_BOOT_OPTS ",2048" + +#define CONFIG_NAND_ECC_BCH + +/* common KM defines */ +#include "km/keymile-common.h" + +#define CONFIG_SYS_RAMBOOT +#define CONFIG_RAMBOOT_PBL +#define CONFIG_RAMBOOT_TEXT_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_RESET_VECTOR_ADDRESS 0xfffffffc +#define CONFIG_SYS_FSL_PBL_PBI board/keymile/kmp204x/pbi.cfg +#define CONFIG_SYS_FSL_PBL_RCW board/keymile/kmp204x/rcw_kmp204x.cfg + +/* High Level Configuration Options */ +#define CONFIG_SYS_BOOK3E_HV /* Category E.HV supported */ +#define CONFIG_FSL_CORENET /* Freescale CoreNet platform */ + +#define CONFIG_SYS_FSL_CPC /* Corenet Platform Cache */ +#define CONFIG_SYS_NUM_CPC CONFIG_SYS_NUM_DDR_CTLRS +#define CONFIG_PCIE1 /* PCIE controller 1 */ +#define CONFIG_PCIE3 /* PCIE controller 3 */ +#define CONFIG_FSL_PCI_INIT /* Use common FSL init code */ +#define CONFIG_SYS_PCI_64BIT /* enable 64-bit PCI resources */ + +#define CONFIG_SYS_DPAA_RMAN /* RMan */ + +/* Environment in SPI Flash */ +#define CONFIG_ENV_OFFSET 0x100000 /* 1MB for u-boot */ +#define CONFIG_ENV_SIZE 0x004000 /* 16K env */ +#define CONFIG_ENV_SECT_SIZE 0x010000 +#define CONFIG_ENV_OFFSET_REDUND 0x110000 +#define CONFIG_ENV_TOTAL_SIZE 0x020000 + +#define CONFIG_SYS_REDUNDAND_ENVIRONMENT + +#ifndef __ASSEMBLY__ +unsigned long get_board_sys_clk(unsigned long dummy); +#endif +#define CONFIG_SYS_CLK_FREQ get_board_sys_clk(0) + +/* + * These can be toggled for performance analysis, otherwise use default. + */ +#define CONFIG_SYS_CACHE_STASHING +#define CONFIG_BACKSIDE_L2_CACHE +#define CONFIG_SYS_INIT_L2CSR0 L2CSR0_L2E +#define CONFIG_BTB /* toggle branch predition */ + +#define CONFIG_ENABLE_36BIT_PHYS + +#define CONFIG_ADDR_MAP +#define CONFIG_SYS_NUM_ADDR_MAP 64 /* number of TLB1 entries */ + +#define CONFIG_POST CONFIG_SYS_POST_MEM_REGIONS /* POST memory regions test */ + +/* + * Config the L3 Cache as L3 SRAM + */ +#define CONFIG_SYS_INIT_L3_ADDR CONFIG_RAMBOOT_TEXT_BASE +#define CONFIG_SYS_INIT_L3_ADDR_PHYS (0xf00000000ull | \ + CONFIG_RAMBOOT_TEXT_BASE) +#define CONFIG_SYS_L3_SIZE (1024 << 10) +#define CONFIG_SYS_INIT_L3_END (CONFIG_SYS_INIT_L3_ADDR + CONFIG_SYS_L3_SIZE) + +#define CONFIG_SYS_DCSRBAR 0xf0000000 +#define CONFIG_SYS_DCSRBAR_PHYS 0xf00000000ull + +/* + * DDR Setup + */ +#define CONFIG_VERY_BIG_RAM +#define CONFIG_SYS_DDR_SDRAM_BASE 0x00000000 +#define CONFIG_SYS_SDRAM_BASE CONFIG_SYS_DDR_SDRAM_BASE -#if defined(CONFIG_KMLION1) -/* App1 Local bus */ -#define CONFIG_SYS_LBAPP1_BASE 0xD0000000 -#define CONFIG_SYS_LBAPP1_BASE_PHYS 0xFD0000000ull +#define CONFIG_DIMM_SLOTS_PER_CTLR 1 +#define CONFIG_CHIP_SELECTS_PER_CTRL (4 * CONFIG_DIMM_SLOTS_PER_CTLR) -#define CONFIG_SYS_LBAPP1_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_LBAPP1_BASE_PHYS) \ +#define CONFIG_DDR_SPD + +#define CONFIG_SYS_SPD_BUS_NUM 0 +#define SPD_EEPROM_ADDRESS 0x54 +#define CONFIG_SYS_SDRAM_SIZE 4096 /* for fixed parameter use */ + +#define CONFIG_SYS_LOAD_ADDR 0x100000 /* default load address */ +#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 + +/****************************************************************************** + * (PRAM usage) + * ... ------------------------------------------------------- + * ... |ROOTFSSIZE | PNVRAM |PHRAM |RESERVED_PRAM | END_OF_RAM + * ... |<------------------- pram -------------------------->| + * ... ------------------------------------------------------- + * @END_OF_RAM: + * @CONFIG_KM_RESERVED_PRAM: reserved pram for special purpose + * @CONFIG_KM_PHRAM: address for /var + * @CONFIG_KM_PNVRAM: address for PNVRAM (for the application) + * @CONFIG_KM_ROOTFSSIZE: address for rootfilesystem in RAM + */ + +/* size of rootfs in RAM */ +#define CONFIG_KM_ROOTFSSIZE 0x0 +/* pseudo-non volatile RAM [hex] */ +#define CONFIG_KM_PNVRAM 0x80000 +/* physical RAM MTD size [hex] */ +#define CONFIG_KM_PHRAM 0x100000 +/* reserved pram area at the end of memory [hex] + * u-boot reserves some memory for the MP boot page + */ +#define CONFIG_KM_RESERVED_PRAM 0x1000 +/* set the default PRAM value to at least PNVRAM + PHRAM when pram env variable + * is not valid yet, which is the case for when u-boot copies itself to RAM + */ +#define CONFIG_PRAM ((CONFIG_KM_PNVRAM + CONFIG_KM_PHRAM) >> 10) + +#define CONFIG_KM_CRAMFS_ADDR 0x2000000 +#define CONFIG_KM_KERNEL_ADDR 0x1000000 /* max kernel size 15.5Mbytes */ +#define CONFIG_KM_FDT_ADDR 0x1F80000 /* max dtb size 0.5Mbytes */ + +/* + * Local Bus Definitions + */ + +/* Set the local bus clock 1/8 of plat clk, 2 clk delay LALE */ +#define CONFIG_SYS_LBC_LCRR (LCRR_CLKDIV_8 | LCRR_EADC_2) + +/* Nand Flash */ +#define CONFIG_NAND_FSL_ELBC +#define CONFIG_SYS_NAND_BASE 0xffa00000 +#define CONFIG_SYS_NAND_BASE_PHYS 0xfffa00000ull + +#define CONFIG_SYS_NAND_BASE_LIST {CONFIG_SYS_NAND_BASE} +#define CONFIG_SYS_MAX_NAND_DEVICE 1 +#define CONFIG_SYS_NAND_BLOCK_SIZE (128 * 1024) + +/* NAND flash config */ +#define CONFIG_SYS_NAND_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_NAND_BASE_PHYS) \ + | BR_PS_8 /* Port Size = 8 bit */ \ + | BR_MS_FCM /* MSEL = FCM */ \ + | BR_V) /* valid */ + +#define CONFIG_SYS_NAND_OR_PRELIM (OR_AM_256KB /* length 256K */ \ + | OR_FCM_BCTLD /* LBCTL not ass */ \ + | OR_FCM_SCY_1 /* 1 clk wait cycle */ \ + | OR_FCM_RST /* 1 clk read setup */ \ + | OR_FCM_PGS /* Large page size */ \ + | OR_FCM_CST) /* 0.25 command setup */ + +#define CONFIG_SYS_BR0_PRELIM CONFIG_SYS_NAND_BR_PRELIM /* NAND Base Address */ +#define CONFIG_SYS_OR0_PRELIM CONFIG_SYS_NAND_OR_PRELIM /* NAND Options */ + +/* QRIO FPGA */ +#define CONFIG_SYS_QRIO_BASE 0xfb000000 +#define CONFIG_SYS_QRIO_BASE_PHYS 0xffb000000ull + +#define CONFIG_SYS_QRIO_BR_PRELIM (BR_PHYS_ADDR(CONFIG_SYS_QRIO_BASE_PHYS) \ | BR_PS_8 /* Port Size 8 bits */ \ | BR_DECC_OFF /* no error corr */ \ | BR_MS_GPCM /* MSEL = GPCM */ \ | BR_V) /* valid */ -#define CONFIG_SYS_LBAPP1_OR_PRELIM (OR_AM_256MB /* length 256MB */ \ - | OR_GPCM_ACS_DIV2 /* LCS 1/2 clk after */ \ - | OR_GPCM_CSNT /* LCS 1/4 clk before */ \ +#define CONFIG_SYS_QRIO_OR_PRELIM (OR_AM_64KB /* length 64K */ \ + | OR_GPCM_BCTLD /* no LCTL assert */ \ + | OR_GPCM_ACS_DIV4 /* LCS 1/4 clk after */ \ | OR_GPCM_SCY_2 /* 2 clk wait cycles */ \ | OR_GPCM_TRLX /* relaxed tmgs */ \ | OR_GPCM_EAD) /* extra bus clk cycles */ -/* Local bus app1 Base Address */ -#define CONFIG_SYS_BR2_PRELIM CONFIG_SYS_LBAPP1_BR_PRELIM -/* Local bus app1 Options */ -#define CONFIG_SYS_OR2_PRELIM CONFIG_SYS_LBAPP1_OR_PRELIM + +#define CONFIG_SYS_BR1_PRELIM CONFIG_SYS_QRIO_BR_PRELIM /* QRIO Base Address */ +#define CONFIG_SYS_OR1_PRELIM CONFIG_SYS_QRIO_OR_PRELIM /* QRIO Options */ + +#define CONFIG_MISC_INIT_F + +#define CONFIG_HWCONFIG + +/* define to use L1 as initial stack */ +#define CONFIG_L1_INIT_RAM +#define CONFIG_SYS_INIT_RAM_LOCK +#define CONFIG_SYS_INIT_RAM_ADDR 0xffd00000 /* Initial L1 address */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH 0xf +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW CONFIG_SYS_INIT_RAM_ADDR +/* The assembler doesn't like typecast */ +#define CONFIG_SYS_INIT_RAM_ADDR_PHYS \ + ((CONFIG_SYS_INIT_RAM_ADDR_PHYS_HIGH * 1ull << 32) | \ + CONFIG_SYS_INIT_RAM_ADDR_PHYS_LOW) +#define CONFIG_SYS_INIT_RAM_SIZE 0x00004000 + +#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - \ + GENERATED_GBL_DATA_SIZE) +#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET + +#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#define CONFIG_SYS_MONITOR_LEN (768 * 1024) +#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) + +/* Serial Port - controlled on board with jumper J8 + * open - index 2 + * shorted - index 1 + */ +#define CONFIG_SYS_NS16550_SERIAL +#define CONFIG_SYS_NS16550_REG_SIZE 1 +#define CONFIG_SYS_NS16550_CLK (get_bus_freq(0) / 2) + +#define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR + 0x11C500) +#define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR + 0x11C600) +#define CONFIG_SYS_NS16550_COM3 (CONFIG_SYS_CCSRBAR + 0x11D500) +#define CONFIG_SYS_NS16550_COM4 (CONFIG_SYS_CCSRBAR + 0x11D600) + +#define CONFIG_KM_CONSOLE_TTY "ttyS0" + +/* I2C */ + +#define CONFIG_SYS_I2C +#define CONFIG_SYS_I2C_INIT_BOARD +#define CONFIG_SYS_I2C_SPEED 100000 /* deblocking */ +#define CONFIG_SYS_NUM_I2C_BUSES 3 +#define CONFIG_SYS_I2C_MAX_HOPS 1 +#define CONFIG_SYS_I2C_FSL /* Use FSL I2C driver */ +#define CONFIG_I2C_MULTI_BUS +#define CONFIG_I2C_CMD_TREE +#define CONFIG_SYS_FSL_I2C_SPEED 400000 +#define CONFIG_SYS_FSL_I2C_SLAVE 0x7F +#define CONFIG_SYS_FSL_I2C_OFFSET 0x118000 +#define CONFIG_SYS_I2C_BUSES { {0, {I2C_NULL_HOP} }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 1 } } }, \ + {0, {{I2C_MUX_PCA9547, 0x70, 2 } } }, \ + } +#ifndef __ASSEMBLY__ +void set_sda(int state); +void set_scl(int state); +int get_sda(void); +int get_scl(void); #endif +#define CONFIG_KM_IVM_BUS 1 /* I2C1 (Mux-Port 1)*/ + +/* + * eSPI - Enhanced SPI + */ + +/* + * General PCI + * Memory space is mapped 1-1, but I/O space must start from 0. + */ + +/* controller 1, direct to uli, tgtid 3, Base address 20000 */ +#define CONFIG_SYS_PCIE1_MEM_VIRT 0x80000000 +#define CONFIG_SYS_PCIE1_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE1_MEM_PHYS 0xc00000000ull +#define CONFIG_SYS_PCIE1_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE1_IO_VIRT 0xf8000000 +#define CONFIG_SYS_PCIE1_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE1_IO_PHYS 0xff8000000ull +#define CONFIG_SYS_PCIE1_IO_SIZE 0x00010000 /* 64k */ + +/* controller 3, Slot 1, tgtid 1, Base address 202000 */ +#define CONFIG_SYS_PCIE3_MEM_VIRT 0xa0000000 +#define CONFIG_SYS_PCIE3_MEM_BUS 0xe0000000 +#define CONFIG_SYS_PCIE3_MEM_PHYS 0xc20000000ull +#define CONFIG_SYS_PCIE3_MEM_SIZE 0x20000000 /* 512M */ +#define CONFIG_SYS_PCIE3_IO_VIRT 0xf8010000 +#define CONFIG_SYS_PCIE3_IO_BUS 0x00000000 +#define CONFIG_SYS_PCIE3_IO_PHYS 0xff8010000ull +#define CONFIG_SYS_PCIE3_IO_SIZE 0x00010000 /* 64k */ + +/* Qman/Bman */ +#define CONFIG_SYS_BMAN_NUM_PORTALS 10 +#define CONFIG_SYS_BMAN_MEM_BASE 0xf4000000 +#define CONFIG_SYS_BMAN_MEM_PHYS 0xff4000000ull +#define CONFIG_SYS_BMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_BMAN_SP_CENA_SIZE 0x4000 +#define CONFIG_SYS_BMAN_SP_CINH_SIZE 0x1000 +#define CONFIG_SYS_BMAN_CENA_BASE CONFIG_SYS_BMAN_MEM_BASE +#define CONFIG_SYS_BMAN_CENA_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_BMAN_CINH_BASE (CONFIG_SYS_BMAN_MEM_BASE + \ + CONFIG_SYS_BMAN_CENA_SIZE) +#define CONFIG_SYS_BMAN_CINH_SIZE (CONFIG_SYS_BMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_BMAN_SWP_ISDR_REG 0xE08 +#define CONFIG_SYS_QMAN_NUM_PORTALS 10 +#define CONFIG_SYS_QMAN_MEM_BASE 0xf4200000 +#define CONFIG_SYS_QMAN_MEM_PHYS 0xff4200000ull +#define CONFIG_SYS_QMAN_MEM_SIZE 0x00200000 +#define CONFIG_SYS_QMAN_SP_CENA_SIZE 0x4000 +#define CONFIG_SYS_QMAN_SP_CINH_SIZE 0x1000 +#define CONFIG_SYS_QMAN_CENA_BASE CONFIG_SYS_QMAN_MEM_BASE +#define CONFIG_SYS_QMAN_CENA_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_QMAN_CINH_BASE (CONFIG_SYS_QMAN_MEM_BASE + \ + CONFIG_SYS_QMAN_CENA_SIZE) +#define CONFIG_SYS_QMAN_CINH_SIZE (CONFIG_SYS_QMAN_MEM_SIZE >> 1) +#define CONFIG_SYS_QMAN_SWP_ISDR_REG 0xE08 + +#define CONFIG_SYS_DPAA_FMAN +#define CONFIG_SYS_DPAA_PME +/* Default address of microcode for the Linux Fman driver + * env is stored at 0x100000, sector size is 0x10000, x2 (redundant) + * ucode is stored after env, so we got 0x120000. + */ +#define CONFIG_SYS_FMAN_FW_ADDR 0x120000 +#define CONFIG_SYS_QE_FMAN_FW_LENGTH 0x10000 +#define CONFIG_SYS_FDT_PAD (0x3000 + CONFIG_SYS_QE_FMAN_FW_LENGTH) + +#define CONFIG_PHYLIB_10G + +#define CONFIG_PCI_INDIRECT_BRIDGE + +#define CONFIG_PCI_SCAN_SHOW /* show pci devices on startup */ + +/* RGMII (FM1@DTESC5) is used as debug itf, it's the only one configured */ +#define CONFIG_SYS_FM1_DTSEC5_PHY_ADDR 0x11 +#define CONFIG_SYS_TBIPA_VALUE 8 +#define CONFIG_ETHPRIME "FM1@DTSEC5" + +/* + * Environment + */ +#define CONFIG_LOADS_ECHO /* echo on for serial download */ +#define CONFIG_SYS_LOADS_BAUD_CHANGE /* allow baudrate change */ + +/* + * Hardware Watchdog + */ +#define CONFIG_WATCHDOG /* enable CPU watchdog */ +#define CONFIG_WATCHDOG_PRESC 34 /* wdog prescaler 2^(64-34) (~10min) */ +#define CONFIG_WATCHDOG_RC WRC_CHIP /* reset chip on watchdog event */ + +/* + * additionnal command line configuration. + */ + +/* we don't need flash support */ +#undef CONFIG_JFFS2_CMDLINE + +/* + * For booting Linux, the board info and command line data + * have to be in the first 64 MB of memory, since this is + * the maximum mapped by the Linux kernel during initialization. + */ +#define CONFIG_SYS_BOOTMAPSZ (64 << 20) /* Initial Memory for Linux */ +#define CONFIG_SYS_BOOTM_LEN (64 << 20) /* Increase max gunzip size */ + +#ifdef CONFIG_CMD_KGDB +#define CONFIG_KGDB_BAUDRATE 230400 /* speed to run kgdb serial port */ +#endif + +#define __USB_PHY_TYPE utmi +#define CONFIG_USB_EHCI_FSL + +/* + * Environment Configuration + */ +#define CONFIG_ENV_OVERWRITE +#ifndef CONFIG_KM_DEF_ENV /* if not set by keymile-common.h */ +#define CONFIG_KM_DEF_ENV "km-common=empty\0" +#endif + +/* architecture specific default bootargs */ +#define CONFIG_KM_DEF_BOOT_ARGS_CPU "" + +/* FIXME: FDT_ADDR is unspecified */ +#define CONFIG_KM_DEF_ENV_CPU \ + "boot=bootm ${load_addr_r} - ${fdt_addr_r}\0" \ + "cramfsloadfdt=" \ + "cramfsload ${fdt_addr_r} " \ + "fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb\0" \ + "fdt_addr_r=" __stringify(CONFIG_KM_FDT_ADDR) "\0" \ + "u-boot=" CONFIG_HOSTNAME "/u-boot.pbl\0" \ + "update=" \ + "sf probe 0;sf erase 0 +${filesize};" \ + "sf write ${load_addr_r} 0 ${filesize};\0" \ + "set_fdthigh=true\0" \ + "checkfdt=true\0" \ + "" + +#define CONFIG_HW_ENV_SETTINGS \ + "hwconfig=fsl_ddr:ctlr_intlv=cacheline\0" \ + "usb_phy_type=" __stringify(__USB_PHY_TYPE) "\0" \ + "usb_dr_mode=host\0" + +#define CONFIG_KM_NEW_ENV \ + "newenv=sf probe 0;" \ + "sf erase " __stringify(CONFIG_ENV_OFFSET) " " \ + __stringify(CONFIG_ENV_TOTAL_SIZE)"\0" + +/* ppc_82xx is the equivalent to ppc_6xx, the generic ppc toolchain */ +#ifndef CONFIG_KM_DEF_ARCH +#define CONFIG_KM_DEF_ARCH "arch=ppc_82xx\0" +#endif + +#define CONFIG_EXTRA_ENV_SETTINGS \ + CONFIG_KM_DEF_ENV \ + CONFIG_KM_DEF_ARCH \ + CONFIG_KM_NEW_ENV \ + CONFIG_HW_ENV_SETTINGS \ + "EEprom_ivm=pca9547:70:9\0" \ + "" + /* App2 Local bus */ #define CONFIG_SYS_LBAPP2_BASE 0xE0000000 #define CONFIG_SYS_LBAPP2_BASE_PHYS 0xFE0000000ull diff --git a/include/configs/kmvect1.h b/include/configs/kmvect1.h deleted file mode 100644 index 6e5d50700c..0000000000 --- a/include/configs/kmvect1.h +++ /dev/null @@ -1,61 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * Copyright (C) 2006 Freescale Semiconductor, Inc. - * Dave Liu <daveliu@freescale.com> - * - * Copyright (C) 2007 Logic Product Development, Inc. - * Peter Barada <peterb@logicpd.com> - * - * Copyright (C) 2007 MontaVista Software, Inc. - * Anton Vorontsov <avorontsov@ru.mvista.com> - * - * (C) Copyright 2010 - * Heiko Schocher, DENX Software Engineering, hs@denx.de. - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/* - * High Level Configuration Options - */ - -#define CONFIG_HOSTNAME "kmvect1" -#define CONFIG_KM_BOARD_NAME "kmvect1" -/* at end of uboot partition, before env */ -#define CONFIG_SYS_QE_FW_ADDR 0xF00B0000 - -/* include common defines/options for all Keymile boards */ -#include "km/keymile-common.h" -#include "km/km-powerpc.h" -#include "km/km-mpc83xx.h" -#include "km/km-mpc8309.h" - -#define CONFIG_SYS_MAMR (MxMR_GPL_x4DIS | \ - 0x0000c000 | \ - MxMR_WLFx_2X) -/* - * QE UEC ethernet configuration - */ -#define CONFIG_MV88E6352_SWITCH -#define CONFIG_KM_MVEXTSW_ADDR 0x10 - -/* ethernet port connected to simple switch 88e6122 (UEC0) */ -#define CONFIG_UEC_ETH1 -#define CONFIG_SYS_UEC1_UCC_NUM 0 /* UCC1 */ -#define CONFIG_SYS_UEC1_RX_CLK QE_CLK9 -#define CONFIG_SYS_UEC1_TX_CLK QE_CLK10 - -#define CONFIG_FIXED_PHY 0xFFFFFFFF -#define CONFIG_SYS_FIXED_PHY_ADDR 0x1E /* unused address */ -#define CONFIG_SYS_FIXED_PHY_PORT(devnum, speed, duplex) \ - {devnum, speed, duplex} -#define CONFIG_SYS_FIXED_PHY_PORTS \ - CONFIG_SYS_FIXED_PHY_PORT("UEC0", SPEED_100, DUPLEX_FULL) - -#define CONFIG_SYS_UEC1_ETH_TYPE FAST_ETH -#define CONFIG_SYS_UEC1_PHY_ADDR CONFIG_SYS_FIXED_PHY_ADDR -#define CONFIG_SYS_UEC1_INTERFACE_TYPE PHY_INTERFACE_MODE_MII -#define CONFIG_SYS_UEC1_INTERFACE_SPEED 100 - -#endif /* __CONFIG_H */ diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt index d484a4bc2f..5de8b81334 100644 --- a/scripts/config_whitelist.txt +++ b/scripts/config_whitelist.txt @@ -129,7 +129,6 @@ CONFIG_BOARD_SIZE_LIMIT CONFIG_BOOGER CONFIG_BOOTBLOCK CONFIG_BOOTFILE -CONFIG_BOOTMAPSZ CONFIG_BOOTMODE CONFIG_BOOTM_LINUX CONFIG_BOOTM_NETBSD @@ -945,16 +944,11 @@ CONFIG_KIRKWOOD_RGMII_PAD_1V8 CONFIG_KIRQ_EN CONFIG_KM8321 CONFIG_KMCOGE4 -CONFIG_KMLION1 CONFIG_KMP204X CONFIG_KMTEGR1 -CONFIG_KMVECT1 CONFIG_KM_BOARD_EXTRA_ENV CONFIG_KM_BOARD_NAME CONFIG_KM_COGE5UN -CONFIG_KM_COMMON_ETH_INIT -CONFIG_KM_CONSOLE_TTY -CONFIG_KM_CRAMFS_ADDR CONFIG_KM_DEF_ARCH CONFIG_KM_DEF_BOOT_ARGS_CPU CONFIG_KM_DEF_ENV @@ -969,24 +963,12 @@ CONFIG_KM_DEV_ENV_FLASH_BOOT_UBI CONFIG_KM_DISABLE_PCI CONFIG_KM_DISABLE_PCIE CONFIG_KM_ECC_MODE -CONFIG_KM_ENV_IS_IN_SPI_NOR -CONFIG_KM_FDT_ADDR -CONFIG_KM_FPGA_CONFIG -CONFIG_KM_IVM_BUS -CONFIG_KM_KERNEL_ADDR CONFIG_KM_KIRKWOOD CONFIG_KM_KIRKWOOD_128M16 CONFIG_KM_KIRKWOOD_PCI CONFIG_KM_MGCOGE3UN -CONFIG_KM_MVEXTSW_ADDR CONFIG_KM_NEW_ENV CONFIG_KM_NUSA -CONFIG_KM_PHRAM -CONFIG_KM_PIGGY4_88E6061 -CONFIG_KM_PIGGY4_88E6352 -CONFIG_KM_PNVRAM -CONFIG_KM_PORTL2 -CONFIG_KM_RESERVED_PRAM CONFIG_KM_ROOTFSSIZE CONFIG_KM_SUGP1 CONFIG_KM_SUV31 @@ -1374,7 +1356,6 @@ CONFIG_PHY_M88E1111 CONFIG_PHY_MODE_NEED_CHANGE CONFIG_PHY_RESET CONFIG_PHY_RESET_DELAY -CONFIG_PIGGY_MAC_ADRESS_OFFSET CONFIG_PIXIS_BRDCFG0_SPI CONFIG_PIXIS_BRDCFG0_USB2 CONFIG_PIXIS_BRDCFG1_AUDCLK_11 @@ -3037,9 +3018,6 @@ CONFIG_SYS_ISA_IO_BASE_ADDRESS CONFIG_SYS_ISA_IO_OFFSET CONFIG_SYS_ISA_IO_STRIDE CONFIG_SYS_ISA_MEM -CONFIG_SYS_IVM_EEPROM_ADR -CONFIG_SYS_IVM_EEPROM_MAX_LEN -CONFIG_SYS_IVM_EEPROM_PAGE_LEN CONFIG_SYS_JFFS2_FIRST_BANK CONFIG_SYS_JFFS2_FIRST_SECTOR CONFIG_SYS_JFFS2_MEM_NAND |