ppc: Remove T2081QDS board and ARCH_T2081 support

This board has not been converted to CONFIG_DM_MMC by the deadline.
Remove it.  It is also the only ARCH_T2081 board so remove that support
as well.

Cc: Shengzhou Liu <Shengzhou.Liu@nxp.com>
Cc: Ruchika Gupta <ruchika.gupta@nxp.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

18 files changed, 7 insertions, 582 deletions

diff --git a/arch/powerpc/cpu/mpc85xx/Kconfig b/arch/powerpc/cpu/mpc85xx/Kconfig
index 124c22f58a..f7679f7ea1 100644
--- a/arch/powerpc/cpu/mpc85xx/Kconfig
+++ b/arch/powerpc/cpu/mpc85xx/Kconfig
@@ -210,14 +210,6 @@ config TARGET_T2080RDB
 	imply CMD_SATA
 	imply PANIC_HANG
 
-config TARGET_T2081QDS
-	bool "Support T2081QDS"
-	select ARCH_T2081
-	select SUPPORT_SPL
-	select PHYS_64BIT
-	select FSL_DDR_FIRST_SLOT_QUAD_CAPABLE
-	select FSL_DDR_INTERACTIVE
-
 config TARGET_T4160RDB
 	bool "Support T4160RDB"
 	select ARCH_T4160
@@ -928,29 +920,6 @@ config ARCH_T2080
 	imply CMD_REGINFO
 	imply FSL_SATA
 
-config ARCH_T2081
-	bool
-	select E500MC
-	select E6500
-	select FSL_LAW
-	select SYS_FSL_DDR_VER_47
-	select SYS_FSL_ERRATUM_A006379
-	select SYS_FSL_ERRATUM_A006593
-	select SYS_FSL_ERRATUM_A007186
-	select SYS_FSL_ERRATUM_A007212
-	select SYS_FSL_ERRATUM_A009942
-	select SYS_FSL_ERRATUM_ESDHC111
-	select FSL_PCIE_RESET
-	select SYS_FSL_HAS_DDR3
-	select SYS_FSL_HAS_SEC
-	select SYS_FSL_QORIQ_CHASSIS2
-	select SYS_FSL_SEC_BE
-	select SYS_FSL_SEC_COMPAT_4
-	select SYS_PPC64
-	select FSL_IFC
-	imply CMD_NAND
-	imply CMD_REGINFO
-
 config ARCH_T4160
 	bool
 	select E500MC
@@ -1052,8 +1021,7 @@ config MAX_CPUS
 		     ARCH_P5040 || \
 		     ARCH_T1040 || \
 		     ARCH_T1042 || \
-		     ARCH_T2080 || \
-		     ARCH_T2081
+		     ARCH_T2080
 	default 2 if ARCH_B4420 || \
 		     ARCH_BSC9132 || \
 		     ARCH_MPC8572 || \
@@ -1110,7 +1078,6 @@ config SYS_CCSRBAR_DEFAULT
 				ARCH_T1040	|| \
 				ARCH_T1042	|| \
 				ARCH_T2080	|| \
-				ARCH_T2081	|| \
 				ARCH_T4160	|| \
 				ARCH_T4240
 	default 0xe0000000 if ARCH_QEMU_E500
@@ -1297,7 +1264,6 @@ config SYS_FSL_NUM_LAWS
 			ARCH_P5020	|| \
 			ARCH_P5040	|| \
 			ARCH_T2080	|| \
-			ARCH_T2081	|| \
 			ARCH_T4160	|| \
 			ARCH_T4240
 	default 16 if	ARCH_T1023	|| \
diff --git a/arch/powerpc/cpu/mpc85xx/Makefile b/arch/powerpc/cpu/mpc85xx/Makefile
index 14e46626f3..30dd1b4c2c 100644
--- a/arch/powerpc/cpu/mpc85xx/Makefile
+++ b/arch/powerpc/cpu/mpc85xx/Makefile
@@ -51,7 +51,6 @@ obj-$(CONFIG_ARCH_T1042)	+= t1040_ids.o
 obj-$(CONFIG_ARCH_T1023) += t1024_ids.o
 obj-$(CONFIG_ARCH_T1024) += t1024_ids.o
 obj-$(CONFIG_ARCH_T2080) += t2080_ids.o
-obj-$(CONFIG_ARCH_T2081) += t2080_ids.o
 
 
 obj-$(CONFIG_QE)	+= qe_io.o
@@ -90,7 +89,6 @@ obj-$(CONFIG_ARCH_T1042)	+= t1040_serdes.o
 obj-$(CONFIG_ARCH_T1023) += t1024_serdes.o
 obj-$(CONFIG_ARCH_T1024) += t1024_serdes.o
 obj-$(CONFIG_ARCH_T2080) += t2080_serdes.o
-obj-$(CONFIG_ARCH_T2081) += t2080_serdes.o
 
 obj-y	+= cpu.o
 obj-y	+= cpu_init.o
diff --git a/arch/powerpc/cpu/mpc85xx/speed.c b/arch/powerpc/cpu/mpc85xx/speed.c
index 9c89ce5d70..59a007b491 100644
--- a/arch/powerpc/cpu/mpc85xx/speed.c
+++ b/arch/powerpc/cpu/mpc85xx/speed.c
@@ -127,7 +127,7 @@ void get_sys_info(sys_info_t *sys_info)
 	 * T2080 rev 1.1 and later also use half mem_pll comparing with rev 1.0
 	 */
 #if defined(CONFIG_ARCH_T4240) || defined(CONFIG_ARCH_T4160) || \
-	defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
+	defined(CONFIG_ARCH_T2080)
 	svr = get_svr();
 	switch (SVR_SOC_VER(svr)) {
 	case SVR_T4240:
@@ -198,7 +198,7 @@ void get_sys_info(sys_info_t *sys_info)
 #endif
 
 #if defined(CONFIG_ARCH_B4860) || defined(CONFIG_ARCH_B4420) || \
-	defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
+	defined(CONFIG_ARCH_T2080)
 #define FM1_CLK_SEL	0xe0000000
 #define FM1_CLK_SHIFT	29
 #elif defined(CONFIG_ARCH_T1024) || defined(CONFIG_ARCH_T1023)
diff --git a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
index 32cfcc0242..5f34aab453 100644
--- a/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
+++ b/arch/powerpc/cpu/mpc85xx/t2080_serdes.c
@@ -160,7 +160,6 @@ static const struct serdes_config serdes1_cfg_tbl[] = {
 	{}
 };
 
-#ifndef CONFIG_ARCH_T2081
 static const struct serdes_config serdes2_cfg_tbl[] = {
 	/* SerDes 2 */
 	{0x1F, {PCIE1, PCIE1, PCIE1, PCIE1, PCIE2, PCIE2, PCIE2, PCIE2} },
@@ -176,13 +175,10 @@ static const struct serdes_config serdes2_cfg_tbl[] = {
 	{0x36, {SRIO2, SRIO2, SRIO2, SRIO2, AURORA, AURORA, SATA1, SATA2} },
 	{}
 };
-#endif
 
 static const struct serdes_config *serdes_cfg_tbl[] = {
 	serdes1_cfg_tbl,
-#ifndef CONFIG_ARCH_T2081
 	serdes2_cfg_tbl,
-#endif
 };
 
 enum srds_prtcl serdes_get_prtcl(int serdes, int cfg, int lane)
diff --git a/arch/powerpc/include/asm/config_mpc85xx.h b/arch/powerpc/include/asm/config_mpc85xx.h
index 4d70259f09..f7ab5e3f65 100644
--- a/arch/powerpc/include/asm/config_mpc85xx.h
+++ b/arch/powerpc/include/asm/config_mpc85xx.h
@@ -364,7 +364,7 @@
 #define QE_NUM_OF_SNUM			28
 #define CONFIG_SYS_FSL_SFP_VER_3_0
 
-#elif defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
+#elif defined(CONFIG_ARCH_T2080)
 #define CONFIG_FSL_CORENET		/* Freescale CoreNet platform */
 #define CONFIG_SYS_FSL_CORES_PER_CLUSTER 4
 #define CONFIG_SYS_FSL_NUM_CC_PLLS	2
@@ -381,9 +381,6 @@
 #define CONFIG_SYS_FSL_SRIO_MAX_PORTS	2
 #define CONFIG_SYS_FSL_SRIO_OB_WIN_NUM	9
 #define CONFIG_SYS_FSL_SRIO_IB_WIN_NUM	5
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_NUM_FM1_DTSEC	6
-#define CONFIG_SYS_NUM_FM1_10GEC	2
 #endif
 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 #define CONFIG_PME_PLAT_CLK_DIV		1
diff --git a/arch/powerpc/include/asm/immap_85xx.h b/arch/powerpc/include/asm/immap_85xx.h
index 905613fa31..3fc56ef0c1 100644
--- a/arch/powerpc/include/asm/immap_85xx.h
+++ b/arch/powerpc/include/asm/immap_85xx.h
@@ -1808,7 +1808,7 @@ typedef struct ccsr_gur {
 #define PXCKEN_MASK				0x80000000
 #define PXCK_MASK				0x00FF0000
 #define PXCK_BITS_START				16
-#elif defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
+#elif defined(CONFIG_ARCH_T2080)
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL		0xff000000
 #define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT	24
 #define FSL_CORENET2_RCWSR4_SRDS2_PRTCL		0x00ff0000
@@ -1880,7 +1880,7 @@ typedef struct ccsr_gur {
 #define FSL_CORENET_RCWSR13_EC2_FM1_DTSEC6_RGMII	0x08000000
 #define FSL_CORENET_RCWSR13_EC2_FM1_GPIO		0x10000000
 #endif
-#if defined(CONFIG_ARCH_T2080) || defined(CONFIG_ARCH_T2081)
+#if defined(CONFIG_ARCH_T2080)
 #define FSL_CORENET_RCWSR13_EC1			0x60000000 /* bits 417..418 */
 #define FSL_CORENET_RCWSR13_EC1_DTSEC3_RGMII	0x00000000
 #define FSL_CORENET_RCWSR13_EC1_GPIO		0x40000000
diff --git a/board/freescale/t208xqds/Kconfig b/board/freescale/t208xqds/Kconfig
index 5a435c2695..f65d8eed54 100644
--- a/board/freescale/t208xqds/Kconfig
+++ b/board/freescale/t208xqds/Kconfig
@@ -1,4 +1,4 @@
-if TARGET_T2080QDS || TARGET_T2081QDS
+if TARGET_T2080QDS
 
 config SYS_BOARD
 	default "t208xqds"
diff --git a/board/freescale/t208xqds/Makefile b/board/freescale/t208xqds/Makefile
index 587903a623..55b1e7390a 100644
--- a/board/freescale/t208xqds/Makefile
+++ b/board/freescale/t208xqds/Makefile
@@ -8,7 +8,6 @@ ifdef CONFIG_SPL_BUILD
 obj-y += spl.o
 else
 obj-$(CONFIG_TARGET_T2080QDS) += t208xqds.o eth_t208xqds.o
-obj-$(CONFIG_TARGET_T2081QDS) += t208xqds.o eth_t208xqds.o
 obj-$(CONFIG_PCI)      += pci.o
 endif
 
diff --git a/board/freescale/t208xqds/eth_t208xqds.c b/board/freescale/t208xqds/eth_t208xqds.c
index aaa3490aaa..705387af3c 100644
--- a/board/freescale/t208xqds/eth_t208xqds.c
+++ b/board/freescale/t208xqds/eth_t208xqds.c
@@ -42,13 +42,6 @@
 #define EMI1_SLOT4	4
 #define EMI1_SLOT5	5
 #define EMI2            7
-#elif defined(CONFIG_TARGET_T2081QDS)
-#define EMI1_SLOT2      3
-#define EMI1_SLOT3      4
-#define EMI1_SLOT5      5
-#define EMI1_SLOT6      6
-#define EMI1_SLOT7      7
-#define EMI2		8
 #endif
 
 #define PCCR1_SGMIIA_KX_MASK		0x00008000
@@ -72,24 +65,12 @@ static const char * const mdio_names[] = {
 	"T2080QDS_MDIO_SLOT5",
 	"T2080QDS_MDIO_SLOT2",
 	"T2080QDS_MDIO_10GC",
-#elif defined(CONFIG_TARGET_T2081QDS)
-	"T2081QDS_MDIO_RGMII1",
-	"T2081QDS_MDIO_RGMII2",
-	"T2081QDS_MDIO_SLOT1",
-	"T2081QDS_MDIO_SLOT2",
-	"T2081QDS_MDIO_SLOT3",
-	"T2081QDS_MDIO_SLOT5",
-	"T2081QDS_MDIO_SLOT6",
-	"T2081QDS_MDIO_SLOT7",
-	"T2081QDS_MDIO_10GC",
 #endif
 };
 
 /* Map SerDes1 8 lanes to default slot, will be initialized dynamically */
 #if defined(CONFIG_TARGET_T2080QDS)
 static u8 lane_to_slot[] = {3, 3, 3, 3, 1, 1, 1, 1};
-#elif defined(CONFIG_TARGET_T2081QDS)
-static u8 lane_to_slot[] = {2, 2, 2, 2, 1, 1, 1, 1};
 #endif
 
 static const char *t208xqds_mdio_name_for_muxval(u8 muxval)
@@ -316,35 +297,6 @@ void board_ft_fman_fixup_port(void *fdt, char *compat, phys_addr_t addr,
 				fdt_status_okay_by_alias(fdt, "emi1_slot2");
 			}
 			break;
-#elif defined(CONFIG_TARGET_T2081QDS)
-		case FM1_DTSEC1:
-		case FM1_DTSEC2:
-		case FM1_DTSEC5:
-		case FM1_DTSEC6:
-		case FM1_DTSEC9:
-		case FM1_DTSEC10:
-			if (mdio_mux[port] == EMI1_SLOT2) {
-				sprintf(alias, "phy_sgmii_s2_%x", phy);
-				fdt_set_phy_handle(fdt, compat, addr, alias);
-				fdt_status_okay_by_alias(fdt, "emi1_slot2");
-			} else if (mdio_mux[port] == EMI1_SLOT3) {
-				sprintf(alias, "phy_sgmii_s3_%x", phy);
-				fdt_set_phy_handle(fdt, compat, addr, alias);
-				fdt_status_okay_by_alias(fdt, "emi1_slot3");
-			} else if (mdio_mux[port] == EMI1_SLOT5) {
-				sprintf(alias, "phy_sgmii_s5_%x", phy);
-				fdt_set_phy_handle(fdt, compat, addr, alias);
-				fdt_status_okay_by_alias(fdt, "emi1_slot5");
-			} else if (mdio_mux[port] == EMI1_SLOT6) {
-				sprintf(alias, "phy_sgmii_s6_%x", phy);
-				fdt_set_phy_handle(fdt, compat, addr, alias);
-				fdt_status_okay_by_alias(fdt, "emi1_slot6");
-			} else if (mdio_mux[port] == EMI1_SLOT7) {
-				sprintf(alias, "phy_sgmii_s7_%x", phy);
-				fdt_set_phy_handle(fdt, compat, addr, alias);
-				fdt_status_okay_by_alias(fdt, "emi1_slot7");
-			}
-			break;
 #endif
 		default:
 			break;
@@ -495,30 +447,6 @@ static void initialize_lane_to_slot(void)
 		lane_to_slot[6] = 3;
 		lane_to_slot[7] = 3;
 		break;
-#elif defined(CONFIG_TARGET_T2081QDS)
-	case 0x6b:
-		lane_to_slot[4] = 1;
-		lane_to_slot[5] = 3;
-		lane_to_slot[6] = 3;
-		lane_to_slot[7] = 3;
-		break;
-	case 0xca:
-	case 0xcb:
-		lane_to_slot[1] = 7;
-		lane_to_slot[2] = 6;
-		lane_to_slot[3] = 5;
-		lane_to_slot[5] = 3;
-		lane_to_slot[6] = 3;
-		lane_to_slot[7] = 3;
-		break;
-	case 0xf2:
-		lane_to_slot[1] = 7;
-		lane_to_slot[2] = 7;
-		lane_to_slot[3] = 7;
-		lane_to_slot[5] = 4;
-		lane_to_slot[6] = 3;
-		lane_to_slot[7] = 7;
-		break;
 #endif
 	default:
 		break;
@@ -570,10 +498,6 @@ int board_eth_init(struct bd_info *bis)
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT4);
 #endif
 	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT5);
-#if defined(CONFIG_TARGET_T2081QDS)
-	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT6);
-	t208xqds_mdio_init(DEFAULT_FM_MDIO_NAME, EMI1_SLOT7);
-#endif
 	t208xqds_mdio_init(DEFAULT_FM_TGEC_MDIO_NAME, EMI2);
 
 	/* Set the two on-board RGMII PHY address */
@@ -689,19 +613,6 @@ int board_eth_init(struct bd_info *bis)
 		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT3_PHY_ADDR);
 		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
 		break;
-#elif defined(CONFIG_TARGET_T2081QDS)
-	case 0xca:
-	case 0xcb:
-		/* SGMII in Slot3 */
-		fm_info_set_phy_address(FM1_DTSEC5, SGMII_CARD_PORT1_PHY_ADDR);
-		fm_info_set_phy_address(FM1_DTSEC6, SGMII_CARD_PORT2_PHY_ADDR);
-		/* SGMII in Slot5 */
-		fm_info_set_phy_address(FM1_DTSEC2, SGMII_CARD_PORT1_PHY_ADDR);
-		/* SGMII in Slot6 */
-		fm_info_set_phy_address(FM1_DTSEC1, SGMII_CARD_PORT1_PHY_ADDR);
-		/* SGMII in Slot7 */
-		fm_info_set_phy_address(FM1_DTSEC10, SGMII_CARD_PORT3_PHY_ADDR);
-		break;
 #endif
 	case 0xf2:
 		/* T2080QDS: SGMII in Slot3; T2081QDS: SGMII in Slot7 */
@@ -745,23 +656,6 @@ int board_eth_init(struct bd_info *bis)
 				fm_info_set_mdio(i, mii_dev_for_muxval(
 						 mdio_mux[i]));
 				break;
-#if defined(CONFIG_TARGET_T2081QDS)
-			case 5:
-				mdio_mux[i] = EMI1_SLOT5;
-				fm_info_set_mdio(i, mii_dev_for_muxval(
-						 mdio_mux[i]));
-				break;
-			case 6:
-				mdio_mux[i] = EMI1_SLOT6;
-				fm_info_set_mdio(i, mii_dev_for_muxval(
-						 mdio_mux[i]));
-				break;
-			case 7:
-				mdio_mux[i] = EMI1_SLOT7;
-				fm_info_set_mdio(i, mii_dev_for_muxval(
-						 mdio_mux[i]));
-				break;
-#endif
 			}
 			break;
 		case PHY_INTERFACE_MODE_RGMII:
diff --git a/board/freescale/t208xqds/t208xqds.c b/board/freescale/t208xqds/t208xqds.c
index 36bb399293..fd3217f24d 100644
--- a/board/freescale/t208xqds/t208xqds.c
+++ b/board/freescale/t208xqds/t208xqds.c
@@ -209,76 +209,6 @@ int brd_mux_lane_to_slot(void)
 		 */
 		 QIXIS_WRITE(brdcfg[12], 0x1a);
 		 break;
-#elif defined(CONFIG_TARGET_T2081QDS)
-	case 0x50:
-	case 0x51:
-		/* SD1(A:D) => SLOT2 XAUI
-		 * SD1(E)   => SLOT1 PCIe4 x1
-		 * SD1(F:H) => SLOT3 SGMII
-		 */
-		QIXIS_WRITE(brdcfg[12], 0x98);
-		QIXIS_WRITE(brdcfg[13], 0x70);
-		break;
-	case 0x6a:
-	case 0x6b:
-		/* SD1(A:D) => XFI SFP Module
-		 * SD1(E)   => SLOT1 PCIe4 x1
-		 * SD1(F:H) => SLOT3 SGMII
-		 */
-		QIXIS_WRITE(brdcfg[12], 0x80);
-		QIXIS_WRITE(brdcfg[13], 0x70);
-		break;
-	case 0x6c:
-	case 0x6d:
-		/* SD1(A:B) => XFI SFP Module
-		 * SD1(C:D) => SLOT2 SGMII
-		 * SD1(E:H) => SLOT1 PCIe4 x4
-		 */
-		QIXIS_WRITE(brdcfg[12], 0xe8);
-		QIXIS_WRITE(brdcfg[13], 0x0);
-		break;
-	case 0xaa:
-	case 0xab:
-		/* SD1(A:D) => SLOT2 PCIe3 x4
-		 * SD1(F:H) => SLOT1 SGMI4 x4
-		 */
-		QIXIS_WRITE(brdcfg[12], 0xf8);
-		QIXIS_WRITE(brdcfg[13], 0x0);
-		break;
-	case 0xca:
-	case 0xcb:
-		/* SD1(A)   => SLOT2 PCIe3 x1
-		 * SD1(B)   => SLOT7 SGMII
-		 * SD1(C)   => SLOT6 SGMII
-		 * SD1(D)   => SLOT5 SGMII
-		 * SD1(E)   => SLOT1 PCIe4 x1
-		 * SD1(F:H) => SLOT3 SGMII
-		 */
-		QIXIS_WRITE(brdcfg[12], 0x80);
-		QIXIS_WRITE(brdcfg[13], 0x70);
-		break;
-	case 0xde:
-	case 0xdf:
-		/* SD1(A:D) => SLOT2 PCIe3 x4
-		 * SD1(E)   => SLOT1 PCIe4 x1
-		 * SD1(F)   => SLOT4 PCIe1 x1
-		 * SD1(G)   => SLOT3 PCIe2 x1
-		 * SD1(H)   => SLOT7 SGMII
-		 */
-		QIXIS_WRITE(brdcfg[12], 0x98);
-		QIXIS_WRITE(brdcfg[13], 0x25);
-		break;
-	case 0xf2:
-		/* SD1(A)   => SLOT2 PCIe3 x1
-		 * SD1(B:D) => SLOT7 SGMII
-		 * SD1(E)   => SLOT1 PCIe4 x1
-		 * SD1(F)   => SLOT4 PCIe1 x1
-		 * SD1(G)   => SLOT3 PCIe2 x1
-		 * SD1(H)   => SLOT7 SGMII
-		 */
-		QIXIS_WRITE(brdcfg[12], 0x81);
-		QIXIS_WRITE(brdcfg[13], 0xa5);
-		break;
 #endif
 	default:
 		printf("WARNING: unsupported for SerDes1 Protocol %d\n",
diff --git a/configs/T2081QDS_NAND_defconfig b/configs/T2081QDS_NAND_defconfig
deleted file mode 100644
index b98e7e0653..0000000000
--- a/configs/T2081QDS_NAND_defconfig
+++ /dev/null
@@ -1,78 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x140000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T2081QDS=y
-CONFIG_SYS_CUSTOM_LDSCRIPT=y
-CONFIG_SYS_LDSCRIPT="arch/powerpc/cpu/mpc85xx/u-boot-nand.lds"
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_NAND_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_SPL_NAND_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_NAND=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_AQUANTIA=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NAND=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2081QDS_SDCARD_defconfig b/configs/T2081QDS_SDCARD_defconfig
deleted file mode 100644
index 8244f38ad2..0000000000
--- a/configs/T2081QDS_SDCARD_defconfig
+++ /dev/null
@@ -1,75 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_MMC_SUPPORT=y
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T2081QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SDCARD"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_MMC_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_MMC=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_AQUANTIA=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_MMC=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2081QDS_SPIFLASH_defconfig b/configs/T2081QDS_SPIFLASH_defconfig
deleted file mode 100644
index 903281d767..0000000000
--- a/configs/T2081QDS_SPIFLASH_defconfig
+++ /dev/null
@@ -1,77 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0x00201000
-CONFIG_SPL_LIBCOMMON_SUPPORT=y
-CONFIG_SPL_LIBGENERIC_SUPPORT=y
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_OFFSET=0x100000
-CONFIG_ENV_SECT_SIZE=0x10000
-CONFIG_SPL_TEXT_BASE=0xFFFD8000
-CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_SPL_DRIVERS_MISC_SUPPORT=y
-CONFIG_SPL=y
-CONFIG_SPL_SPI_FLASH_SUPPORT=y
-CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T2081QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="RAMBOOT_PBL,SPIFLASH"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-# CONFIG_SPL_FRAMEWORK is not set
-CONFIG_SPL_SPI_BOOT=y
-CONFIG_SPL_FSL_PBL=y
-CONFIG_SPL_ENV_SUPPORT=y
-CONFIG_SPL_I2C_SUPPORT=y
-CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_AQUANTIA=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_SPIFLASH=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig b/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
deleted file mode 100644
index 30b7bac838..0000000000
--- a/configs/T2081QDS_SRIO_PCIE_BOOT_defconfig
+++ /dev/null
@@ -1,54 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xFFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T2081QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_SYS_EXTRA_OPTIONS="SRIO_PCIE_BOOT_SLAVE"
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_GREPENV=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_REMOTE=y
-CONFIG_ENV_ADDR=0xFFE20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_AQUANTIA=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_REMOTE=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/configs/T2081QDS_defconfig b/configs/T2081QDS_defconfig
deleted file mode 100644
index 682d78c000..0000000000
--- a/configs/T2081QDS_defconfig
+++ /dev/null
@@ -1,62 +0,0 @@
-CONFIG_PPC=y
-CONFIG_SYS_TEXT_BASE=0xEFF40000
-CONFIG_ENV_SIZE=0x2000
-CONFIG_ENV_SECT_SIZE=0x20000
-CONFIG_MPC85xx=y
-CONFIG_TARGET_T2081QDS=y
-CONFIG_FIT=y
-CONFIG_FIT_VERBOSE=y
-CONFIG_OF_BOARD_SETUP=y
-CONFIG_OF_STDOUT_VIA_ALIAS=y
-CONFIG_BOOTDELAY=10
-CONFIG_BOARD_EARLY_INIT_R=y
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_IMLS=y
-CONFIG_CMD_GREPENV=y
-CONFIG_CMD_I2C=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_SF=y
-CONFIG_CMD_USB=y
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_MP=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nor0=fe8000000.nor,nand0=fff800000.flash,spi0=spife110000.0"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=fe8000000.nor:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);fff800000.flash:1m(uboot),5m(kernel),128k(dtb),96m(fs),-(user);spife110000.0:1m(uboot),5m(kernel),128k(dtb),-(user)"
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xEFF20000
-CONFIG_FSL_CAAM=y
-CONFIG_FSL_ESDHC=y
-CONFIG_MTD=y
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
-CONFIG_FLASH_CFI_MTD=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
-CONFIG_SF_DEFAULT_SPEED=10000000
-CONFIG_SPI_FLASH_EON=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_SPI_FLASH_SST=y
-CONFIG_PHYLIB=y
-CONFIG_PHY_AQUANTIA=y
-CONFIG_PHY_REALTEK=y
-CONFIG_PHY_TERANETICS=y
-CONFIG_PHY_VITESSE=y
-CONFIG_E1000=y
-CONFIG_FMAN_ENET=y
-CONFIG_MII=y
-CONFIG_SYS_QE_FMAN_FW_IN_NOR=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_FSL_ESPI=y
-CONFIG_USB=y
-CONFIG_USB_STORAGE=y
-CONFIG_ADDR_MAP=y
-CONFIG_SYS_NUM_ADDR_MAP=64
-CONFIG_OF_LIBFDT=y
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index cf062fad4d..2bb560bd56 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -721,7 +721,6 @@ config SYS_DPAA_QBMAN
 		     ARCH_T1040 || \
 		     ARCH_T1042 || \
 		     ARCH_T2080 || \
-		     ARCH_T2081 || \
 		     ARCH_T4240 || \
 		     ARCH_T4160 || \
 		     ARCH_P4080 || \
diff --git a/drivers/net/fm/Makefile b/drivers/net/fm/Makefile
index e10db710e6..c6c1440a20 100644
--- a/drivers/net/fm/Makefile
+++ b/drivers/net/fm/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_ARCH_T1042)	+= t1040.o
 obj-$(CONFIG_ARCH_T1023) += t1024.o
 obj-$(CONFIG_ARCH_T1024) += t1024.o
 obj-$(CONFIG_ARCH_T2080) += t2080.o
-obj-$(CONFIG_ARCH_T2081) += t2080.o
 obj-$(CONFIG_ARCH_T4240) += t4240.o
 obj-$(CONFIG_ARCH_T4160) += t4240.o
 obj-$(CONFIG_ARCH_B4420) += b4860.o
diff --git a/include/configs/T208xQDS.h b/include/configs/T208xQDS.h
index f0ef365a85..b1acb564c3 100644
--- a/include/configs/T208xQDS.h
+++ b/include/configs/T208xQDS.h
@@ -19,7 +19,6 @@
 #define CONFIG_SYS_SRIO		/* Enable Serial RapidIO Support */
 #define CONFIG_SRIO1		/* SRIO port 1 */
 #define CONFIG_SRIO2		/* SRIO port 2 */
-#elif defined(CONFIG_ARCH_T2081)
 #endif
 
 /* High Level Configuration Options */
@@ -50,8 +49,6 @@
 #define CONFIG_SYS_NAND_U_BOOT_OFFS	(256 << 10)
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_nand_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_nand_rcw.cfg
 #endif
 #endif
 
@@ -67,8 +64,6 @@
 #endif
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_spi_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_spi_rcw.cfg
 #endif
 #endif
 
@@ -83,8 +78,6 @@
 #endif
 #if defined(CONFIG_ARCH_T2080)
 #define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2080_sd_rcw.cfg
-#elif defined(CONFIG_ARCH_T2081)
-#define CONFIG_SYS_FSL_PBL_RCW board/freescale/t208xqds/t2081_sd_rcw.cfg
 #endif
 #endif