arm: Remove db-88f6281-bp board

This board has not been converted to CONFIG_DM_MMC by the deadline of
v2019.04, which is almost two years ago.  In addition there are other DM
migrations it is also missing.  Remove it.

Cc: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>
Acked-by: Chris Packham <judge.packham@gmail.com>

14 files changed, 0 insertions, 561 deletions

diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile
index af2842a0f8..33e483f4fb 100644
--- a/arch/arm/dts/Makefile
+++ b/arch/arm/dts/Makefile
@@ -39,8 +39,6 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += \
 	kirkwood-atl-sbx81lifxcat.dtb \
 	kirkwood-blackarmor-nas220.dtb \
 	kirkwood-d2net.dtb \
-	kirkwood-db-88f6281.dtb \
-	kirkwood-db-88f6281-spi.dtb \
 	kirkwood-dns325.dtb \
 	kirkwood-dockstar.dtb \
 	kirkwood-dreamplug.dtb \
diff --git a/arch/arm/dts/kirkwood-db-88f6281-spi.dts b/arch/arm/dts/kirkwood-db-88f6281-spi.dts
deleted file mode 100644
index 50b1b0d4a5..0000000000
--- a/arch/arm/dts/kirkwood-db-88f6281-spi.dts
+++ /dev/null
@@ -1,48 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db-88f6281.dts"
-
-/ {
-	aliases {
-		spi0 = &spi0;
-	};
-};
-
-&spi0 {
-	status = "okay";
-
-	flash@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "st,m25p128", "jedec,spi-nor", "spi-flash";
-		reg = <0>;
-		spi-max-frequency = <50000000>;
-		mode = <0>;
-
-		partition@u-boot {
-			reg = <0x00000000 0x00c00000>;
-			label = "u-boot";
-		};
-		partition@u-boot-env {
-			reg = <0x00c00000 0x00040000>;
-			label = "u-boot-env";
-		};
-		partition@unused {
-			reg = <0x00100000 0x00f00000>;
-			label = "unused";
-		};
-	};
-};
-
-&nand {
-	status = "disabled";
-};
diff --git a/arch/arm/dts/kirkwood-db-88f6281.dts b/arch/arm/dts/kirkwood-db-88f6281.dts
deleted file mode 100644
index 2adb17c955..0000000000
--- a/arch/arm/dts/kirkwood-db-88f6281.dts
+++ /dev/null
@@ -1,26 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-88F6281-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- */
-
-/dts-v1/;
-
-#include "kirkwood-db.dtsi"
-#include "kirkwood-6281.dtsi"
-
-/ {
-	model = "Marvell DB-88F6281-BP Development Board";
-	compatible = "marvell,db-88f6281-bp", "marvell,kirkwood-88f6281", "marvell,kirkwood";
-};
-
-&pciec {
-        status = "okay";
-};
-
-&pcie0 {
-	status = "okay";
-};
diff --git a/arch/arm/dts/kirkwood-db.dtsi b/arch/arm/dts/kirkwood-db.dtsi
deleted file mode 100644
index b81d8e8298..0000000000
--- a/arch/arm/dts/kirkwood-db.dtsi
+++ /dev/null
@@ -1,94 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0
-/*
- * Marvell DB-{88F6281,88F6282}-BP Development Board Setup
- *
- * Saeed Bishara <saeed@marvell.com>
- * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- *
- * This file contains the definitions that are common between the 6281
- * and 6282 variants of the Marvell Kirkwood Development Board.
- */
-
-#include "kirkwood.dtsi"
-
-/ {
-	memory {
-		device_type = "memory";
-		reg = <0x00000000 0x20000000>; /* 512 MB */
-	};
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk";
-		stdout-path = &uart0;
-	};
-
-	aliases {
-		ethernet0 = &eth0;
-		spi0 = &spi0;
-	};
-
-	ocp@f1000000 {
-		pin-controller@10000 {
-			pmx_sdio_gpios: pmx-sdio-gpios {
-				marvell,pins = "mpp37", "mpp38";
-				marvell,function = "gpio";
-			};
-		};
-
-		serial@12000 {
-			status = "okay";
-		};
-
-		sata@80000 {
-			nr-ports = <2>;
-			status = "okay";
-		};
-
-		ehci@50000 {
-			status = "okay";
-		};
-
-		mvsdio@90000 {
-			pinctrl-0 = <&pmx_sdio_gpios>;
-			pinctrl-names = "default";
-			wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
-			cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>;
-			status = "okay";
-		};
-	};
-};
-
-&nand {
-	chip-delay = <25>;
-	status = "okay";
-
-	partition@0 {
-		label = "uboot";
-		reg = <0x0 0x100000>;
-	};
-
-	partition@100000 {
-		label = "uImage";
-		reg = <0x100000 0x400000>;
-	};
-
-	partition@500000 {
-		label = "root";
-		reg = <0x500000 0x1fb00000>;
-	};
-};
-
-&mdio {
-	status = "okay";
-
-	ethphy0: ethernet-phy@8 {
-		reg = <8>;
-	};
-};
-
-&eth0 {
-	status = "okay";
-	ethernet0-port@0 {
-		phy-handle = <&ethphy0>;
-	};
-};
diff --git a/arch/arm/mach-kirkwood/Kconfig b/arch/arm/mach-kirkwood/Kconfig
index ae44cb665e..cb4e9f29ef 100644
--- a/arch/arm/mach-kirkwood/Kconfig
+++ b/arch/arm/mach-kirkwood/Kconfig
@@ -62,9 +62,6 @@ config TARGET_SBx81LIFKW
 config TARGET_SBx81LIFXCAT
 	bool "Allied Telesis SBx81GP24/SBx81GT24"
 
-config TARGET_DB_88F6281_BP
-	bool "Marvell DB-88F6281-BP"
-
 endchoice
 
 config SYS_SOC
@@ -89,6 +86,5 @@ source "board/Seagate/nas220/Kconfig"
 source "board/zyxel/nsa310s/Kconfig"
 source "board/alliedtelesis/SBx81LIFKW/Kconfig"
 source "board/alliedtelesis/SBx81LIFXCAT/Kconfig"
-source "board/Marvell/db-88f6281-bp/Kconfig"
 
 endif
diff --git a/board/Marvell/db-88f6281-bp/.gitignore b/board/Marvell/db-88f6281-bp/.gitignore
deleted file mode 100644
index 775b9346b8..0000000000
--- a/board/Marvell/db-88f6281-bp/.gitignore
+++ /dev/null
@@ -1 +0,0 @@
-kwbimage.cfg
diff --git a/board/Marvell/db-88f6281-bp/Kconfig b/board/Marvell/db-88f6281-bp/Kconfig
deleted file mode 100644
index 38467399e6..0000000000
--- a/board/Marvell/db-88f6281-bp/Kconfig
+++ /dev/null
@@ -1,12 +0,0 @@
-if TARGET_DB_88F6281_BP
-
-config SYS_BOARD
-	default "db-88f6281-bp"
-
-config SYS_VENDOR
-	default "Marvell"
-
-config SYS_CONFIG_NAME
-	default "db-88f6281-bp"
-
-endif
diff --git a/board/Marvell/db-88f6281-bp/MAINTAINERS b/board/Marvell/db-88f6281-bp/MAINTAINERS
deleted file mode 100644
index acf0b051ff..0000000000
--- a/board/Marvell/db-88f6281-bp/MAINTAINERS
+++ /dev/null
@@ -1,10 +0,0 @@
-DB_88F6820_AMC BOARD
-M:	Chris Packham <judge.packham@gmail.com>
-S:	Maintained
-F:	arch/arm/dts/kirkwood-db-88f6281.dts
-F:	arch/arm/dts/kirkwood-db-88f6281-spi.dts
-F:	arch/arm/dts/kirkwood-db.dtsi
-F:	board/Marvell/db-88f6281-bp/
-F:	include/configs/db-88f6281-bp.h
-F:	configs/db-88f6281-bp-nand_defconfig
-F:	configs/db-88f6281-bp-spi_defconfig
diff --git a/board/Marvell/db-88f6281-bp/Makefile b/board/Marvell/db-88f6281-bp/Makefile
deleted file mode 100644
index 003e9f66d1..0000000000
--- a/board/Marvell/db-88f6281-bp/Makefile
+++ /dev/null
@@ -1,12 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-obj-y	:= db-88f6281-bp.o
-extra-y := kwbimage.cfg
-
-quiet_cmd_sed = SED     $@
-      cmd_sed = sed $(SEDFLAGS_$(@F)) $< >$(dir $@)$(@F)
-
-SEDFLAGS_kwbimage.cfg = -e "s/^\#@BOOT_FROM.*/BOOT_FROM	$(if $(CONFIG_CMD_NAND),nand,spi)/"
-$(obj)/kwbimage.cfg: $(src)/kwbimage.cfg.in include/autoconf.mk \
-		include/config/auto.conf
-	$(call if_changed,sed)
diff --git a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c b/board/Marvell/db-88f6281-bp/db-88f6281-bp.c
deleted file mode 100644
index 62027bd638..0000000000
--- a/board/Marvell/db-88f6281-bp/db-88f6281-bp.c
+++ /dev/null
@@ -1,106 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-
-#include <common.h>
-#include <init.h>
-#include <net.h>
-#include <linux/bitops.h>
-#include <linux/io.h>
-#include <miiphy.h>
-#include <netdev.h>
-#include <asm/arch/cpu.h>
-#include <asm/arch/soc.h>
-#include <asm/arch/mpp.h>
-#include <asm/arch/gpio.h>
-
-#define DB_88F6281_OE_LOW	~(BIT(7))
-#define DB_88F6281_OE_HIGH	~(BIT(15) | BIT(14) | BIT(13) | BIT(4))
-#define DB_88F6281_OE_VAL_LOW	BIT(7)
-#define DB_88F6281_OE_VAL_HIGH	0
-
-DECLARE_GLOBAL_DATA_PTR;
-
-int board_early_init_f(void)
-{
-	mvebu_config_gpio(DB_88F6281_OE_VAL_LOW,
-			  DB_88F6281_OE_VAL_HIGH,
-			  DB_88F6281_OE_LOW, DB_88F6281_OE_HIGH);
-
-	/* Multi-Purpose Pins Functionality configuration */
-	static const u32 kwmpp_config[] = {
-#ifdef CONFIG_CMD_NAND
-		MPP0_NF_IO2,
-		MPP1_NF_IO3,
-		MPP2_NF_IO4,
-		MPP3_NF_IO5,
-#else
-		MPP0_SPI_SCn,
-		MPP1_SPI_MOSI,
-		MPP2_SPI_SCK,
-		MPP3_SPI_MISO,
-#endif
-		MPP4_NF_IO6,
-		MPP5_NF_IO7,
-		MPP6_SYSRST_OUTn,
-		MPP7_GPO,
-		MPP8_TW_SDA,
-		MPP9_TW_SCK,
-		MPP10_UART0_TXD,
-		MPP11_UART0_RXD,
-		MPP12_SD_CLK,
-		MPP13_SD_CMD,
-		MPP14_SD_D0,
-		MPP15_SD_D1,
-		MPP16_SD_D2,
-		MPP17_SD_D3,
-		MPP18_NF_IO0,
-		MPP19_NF_IO1,
-		MPP20_SATA1_ACTn,
-		MPP21_SATA0_ACTn,
-		MPP22_GPIO,
-		MPP23_GPIO,
-		MPP24_GPIO,
-		MPP25_GPIO,
-		MPP26_GPIO,
-		MPP27_GPIO,
-		MPP28_GPIO,
-		MPP29_GPIO,
-		MPP30_GPIO,
-		MPP31_GPIO,
-		MPP32_GPIO,
-		MPP33_GPIO,
-		MPP34_GPIO,
-		MPP35_GPIO,
-		MPP36_GPIO,
-		MPP37_GPIO,
-		MPP38_GPIO,
-		MPP39_GPIO,
-		MPP40_GPIO,
-		MPP41_GPIO,
-		MPP42_GPIO,
-		MPP43_GPIO,
-		MPP44_GPIO,
-		MPP45_GPIO,
-		MPP46_GPIO,
-		MPP47_GPIO,
-		MPP48_GPIO,
-		MPP49_GPIO,
-		0
-	};
-	kirkwood_mpp_conf(kwmpp_config, NULL);
-
-	return 0;
-}
-
-int board_init(void)
-{
-	gd->bd->bi_boot_params = mvebu_sdram_bar(0) + 0x100;
-
-	return 0;
-}
-
-#ifdef CONFIG_RESET_PHY_R
-/* automatically defined by kirkwood config.h */
-void reset_phy(void)
-{
-}
-#endif
diff --git a/board/Marvell/db-88f6281-bp/kwbimage.cfg.in b/board/Marvell/db-88f6281-bp/kwbimage.cfg.in
deleted file mode 100644
index 05f8b275f6..0000000000
--- a/board/Marvell/db-88f6281-bp/kwbimage.cfg.in
+++ /dev/null
@@ -1,36 +0,0 @@
-# SPDX-License-Identifier: GPL-2.0+
-
-# Boot Media configurations
-#@BOOT_FROM
-
-DATA 0xd00100e0 0x1b1b1b9b
-DATA 0xd0020134 0xbbbbbbbb
-DATA 0xd0020138 0x00bbbbbb
-DATA 0xd0020154 0x00000200
-DATA 0xd002014c 0x00001c00
-DATA 0xd0020148 0x00000001
-
-DATA 0xd0001400 0x43000c30
-DATA 0xd0001404 0x39543000
-DATA 0xd0001408 0x22125451
-DATA 0xd000140c 0x00000833
-DATA 0xd0001410 0x000000cc
-DATA 0xd0001414 0x00000000
-DATA 0xd0001418 0x00000000
-DATA 0xd000141c 0x00000c52
-DATA 0xd0001420 0x00000044
-DATA 0xd0001424 0x0000f1ff
-DATA 0xd0001428 0x00085520
-DATA 0xd000147c 0x00008552
-DATA 0xd0001504 0x0ffffff1
-DATA 0xd0001508 0x10000000
-DATA 0xd000150c 0x0ffffff5
-DATA 0xd0001514 0x00000000
-DATA 0xd000151c 0x00000000
-DATA 0xd0001494 0x84210000
-DATA 0xd0001498 0x00000000
-DATA 0xd000149c 0x0000f40f
-DATA 0xd0001480 0x00000001
-
-# End of Header extension
-DATA 0x0 0x0
diff --git a/configs/db-88f6281-bp-nand_defconfig b/configs/db-88f6281-bp-nand_defconfig
deleted file mode 100644
index 4fff3269af..0000000000
--- a/configs/db-88f6281-bp-nand_defconfig
+++ /dev/null
@@ -1,64 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_TARGET_DB_88F6281_BP=y
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP"
-CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281"
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_NAND=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
-CONFIG_ISO_PARTITION=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
-CONFIG_MTD=y
-CONFIG_MTD_RAW_NAND=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_DM_ETH=y
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_MV=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_KIRKWOOD_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_LZMA=y
-CONFIG_LZO=y
diff --git a/configs/db-88f6281-bp-spi_defconfig b/configs/db-88f6281-bp-spi_defconfig
deleted file mode 100644
index 07e9db7f41..0000000000
--- a/configs/db-88f6281-bp-spi_defconfig
+++ /dev/null
@@ -1,63 +0,0 @@
-CONFIG_ARM=y
-CONFIG_SYS_DCACHE_OFF=y
-CONFIG_ARCH_CPU_INIT=y
-CONFIG_SYS_THUMB_BUILD=y
-CONFIG_ARCH_KIRKWOOD=y
-CONFIG_SYS_TEXT_BASE=0x600000
-CONFIG_NR_DRAM_BANKS=2
-CONFIG_TARGET_DB_88F6281_BP=y
-CONFIG_ENV_SIZE=0x1000
-CONFIG_ENV_OFFSET=0xC0000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_IDENT_STRING="\nMarvell DB-88F6281-BP"
-CONFIG_DEFAULT_DEVICE_TREE="kirkwood-db-88f6281-spi"
-# CONFIG_SYS_MALLOC_F is not set
-CONFIG_FIT=y
-CONFIG_BOOTDELAY=3
-# CONFIG_DISPLAY_BOARDINFO is not set
-CONFIG_HUSH_PARSER=y
-CONFIG_CMD_BOOTZ=y
-CONFIG_CMD_DM=y
-# CONFIG_CMD_FLASH is not set
-CONFIG_CMD_IDE=y
-CONFIG_CMD_MMC=y
-CONFIG_CMD_USB=y
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_DHCP=y
-CONFIG_CMD_MII=y
-CONFIG_CMD_PING=y
-CONFIG_CMD_EXT2=y
-CONFIG_CMD_EXT4=y
-CONFIG_CMD_FAT=y
-CONFIG_CMD_JFFS2=y
-CONFIG_CMD_MTDPARTS=y
-CONFIG_MTDIDS_DEFAULT="nand0=orion_nand"
-CONFIG_MTDPARTS_DEFAULT="mtdparts=orion_nand:512K(uboot),512K(env),4M(kernel),-(rootfs)"
-CONFIG_ISO_PARTITION=y
-CONFIG_OF_CONTROL=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_SPI_FLASH=y
-CONFIG_SYS_RELOC_GD_ENV_ADDR=y
-CONFIG_NET_RANDOM_ETHADDR=y
-CONFIG_NETCONSOLE=y
-CONFIG_DM=y
-CONFIG_MVSATA_IDE=y
-CONFIG_MTD=y
-CONFIG_DM_SPI_FLASH=y
-CONFIG_SPI_FLASH_STMICRO=y
-CONFIG_PHY_MARVELL=y
-CONFIG_DM_ETH=y
-CONFIG_MVGBE=y
-CONFIG_MII=y
-CONFIG_DM_RTC=y
-CONFIG_RTC_MV=y
-CONFIG_SYS_NS16550=y
-CONFIG_SPI=y
-CONFIG_DM_SPI=y
-CONFIG_KIRKWOOD_SPI=y
-CONFIG_USB=y
-CONFIG_DM_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_LZMA=y
-CONFIG_LZO=y
diff --git a/include/configs/db-88f6281-bp.h b/include/configs/db-88f6281-bp.h
deleted file mode 100644
index 06a7091be2..0000000000
--- a/include/configs/db-88f6281-bp.h
+++ /dev/null
@@ -1,83 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-
-#ifndef _CONFIG_DB_88F6281_BP_H
-#define _CONFIG_DB_88F6281_BP_H
-
-/*
- * High Level Configuration Options (easy to change)
- */
-#define CONFIG_FEROCEON_88FR131	1	/* CPU Core subversion */
-#define CONFIG_KW88F6281	1	/* SOC Name */
-#define CONFIG_SKIP_LOWLEVEL_INIT	/* disable board lowlevel_init */
-#define CONFIG_SYS_TCLK		166666667
-#define CONFIG_SYS_KWD_CONFIG	$(CONFIG_BOARDDIR)/kwbimage.cfg
-
-/* additions for new ARM relocation support */
-#define CONFIG_SYS_SDRAM_BASE	0x00000000
-
-#define CONFIG_KIRKWOOD_EGIGA_INIT	/* Enable GbePort0/1 for kernel */
-#define CONFIG_KIRKWOOD_PCIE_INIT	/* Enable PCIE Port0 */
-#define CONFIG_KIRKWOOD_RGMII_PAD_1V8	/* Set RGMII Pad voltage to 1.8V */
-#define CONFIG_KIRKWOOD_GPIO	1
-
-/*
- * NS16550 Configuration
- */
-#define CONFIG_SYS_NS16550_SERIAL
-#define CONFIG_SYS_NS16550_REG_SIZE	(-4)
-#define CONFIG_SYS_NS16550_CLK		CONFIG_SYS_TCLK
-#define CONFIG_SYS_NS16550_COM1		KW_UART0_BASE
-
-#define CONFIG_SYS_MAX_NAND_DEVICE     1
-
-/*
- *  Environment variables configurations
- */
-#define CONFIG_ENV_SPI_BUS		0
-#define CONFIG_ENV_SPI_CS		0
-#define CONFIG_ENV_SPI_MAX_HZ		20000000	/* 20Mhz */
-#define CONFIG_ENV_SPI_MODE		CONFIG_SF_DEFAULT_MODE
-
-/*
- * U-Boot bootcode configuration
- */
-
-#define CONFIG_SYS_MONITOR_LEN		(256 << 10)	/* Reserve 256 kB for monitor */
-#define CONFIG_SYS_MALLOC_LEN		  (4 << 20)	/* Reserve 4.0 MB for malloc */
-
-/*
- * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
- * the maximum mapped by the Linux kernel during initialization.
- */
-#define CONFIG_SYS_BOOTMAPSZ		(8 << 20)	/* Initial Mem map for Linux*/
-
-/* size in bytes reserved for initial data */
-
-#include <asm/arch/config.h>
-/* There is no PHY directly connected so don't ask it for link status */
-#undef CONFIG_SYS_FAULT_ECHO_LINK_DOWN
-
-/*
- * Other required minimal configurations
- */
-#define CONFIG_SYS_RESET_ADDRESS 0xffff0000	/* Rst Vector Adr */
-
-/*
- * SDIO/MMC Card Configuration
- */
-#ifdef CONFIG_CMD_MMC
-#define CONFIG_MVEBU_MMC
-#define CONFIG_SYS_MMC_BASE KW_SDIO_BASE
-#endif /* CONFIG_CMD_MMC */
-
-/*
- * SATA Driver configuration
- */
-#ifdef CONFIG_MVSATA_IDE
-#define CONFIG_SYS_ATA_IDE0_OFFSET	MV_SATA_PORT0_OFFSET
-#endif /*CONFIG_MVSATA_IDE*/
-
-#define CONFIG_SYS_LOAD_ADDR  0x1000000      /* default location for tftp and bootm */
-
-#endif /* _CONFIG_DB_88F6281_BP_H */