board: ns3: Remove superfluous reset logic

The current implementation of reset_cpu() in the ns3 board code does not
archieve what it is supposed to (according to the comments), due to
a number of reasons:

 1. The argument to reset_cpu() is _not_ actually passed from the
    `reset` command, but is set to 0 in all call-sites (in this
    specific case, see arch/arm/lib/reset.c).  Thus, performing
    different kinds of resets based on its value will not work as
    expected.

 2. Contrary to its documentation, the passed argument is not
    interpreted, but a static `L3_RESET` define is used.  The other
    comment properly notes that this will always perform a L3 reset,
    though.

 3. The "parsing" of the static `L3_RESET` value is not even using the
    upper and lower nibble as stated in the comment, but uses the last
    two decimal digits of the value.

This is currently one of the only implementations left in U-Boot, which
make "use" of the value passed to reset_cpu().  As this is done under
false assumption (the value does not have any meaning anymore), it makes
sense to bring it into line with the rest and start ignoring the
parameter.

This is a preparation for removal of the reset_cpu() parameter across
the entire tree in a later patch.

Fixes: b5a152e7ca0b ("board: ns3: default reset type to L3")
Cc: Bharat Gooty <bharat.gooty@broadcom.com>
Cc: Rayagonda Kokatanur <rayagonda.kokatanur@broadcom.com>
Signed-off-by: Harald Seiler <hws@denx.de>
Reviewed-by: Simon Glass <sjg@chromium.org>

1 files changed, 2 insertions, 20 deletions

diff --git a/board/broadcom/bcmns3/ns3.c b/board/broadcom/bcmns3/ns3.c
index 9d2df92fa1..8e6b006518 100644
--- a/board/broadcom/bcmns3/ns3.c
+++ b/board/broadcom/bcmns3/ns3.c
@@ -15,9 +15,6 @@
 #include <dt-bindings/memory/bcm-ns3-mc.h>
 #include <broadcom/chimp.h>
 
-/* Default reset-level = 3 and strap-val = 0 */
-#define L3_RESET	30
-
 #define BANK_OFFSET(bank)      ((u64)BCM_NS3_DDR_INFO_BASE + 8 + ((bank) * 16))
 
 /*
@@ -190,23 +187,8 @@ ulong board_get_usable_ram_top(ulong total_size)
 
 void reset_cpu(ulong level)
 {
-	u32 reset_level, strap_val;
-
-	/* Default reset type is L3 reset */
-	if (!level) {
-		/*
-		 * Encoding: U-Boot reset command expects decimal argument,
-		 * Boot strap val: Bits[3:0]
-		 * reset level: Bits[7:4]
-		 */
-		strap_val = L3_RESET % 10;
-		level = L3_RESET / 10;
-		reset_level = level % 10;
-		psci_system_reset2(reset_level, strap_val);
-	} else {
-		/* U-Boot cmd "reset" with any arg will trigger L1 reset */
-		psci_system_reset();
-	}
+	/* Perform a level 3 reset */
+	psci_system_reset2(3, 0);
 }
 
 #ifdef CONFIG_OF_BOARD_SETUP