refresh

1 files changed, 229 insertions, 175 deletions

diff --git a/po/zh_TW.po b/po/zh_TW.po
index d0a24382e..21285e6aa 100644
--- a/po/zh_TW.po
+++ b/po/zh_TW.po
@@ -9,7 +9,7 @@ msgid ""
 msgstr ""
 "Project-Id-Version: zh_TW\n"
 "Report-Msgid-Bugs-To: \n"
-"POT-Creation-Date: 2004-03-17 01:34-0500\n"
+"POT-Creation-Date: 2004-04-14 22:39-0400\n"
 "PO-Revision-Date: 2004-03-18 10:20+1000\n"
 "Last-Translator: Ben Wu <hpwu@redhat.com>\n"
 "Language-Team: Traditional Chinese <fedora-trans-zh_tw@redhat.com>\n"
@@ -95,7 +95,7 @@ msgstr "請連線至 %s 以進行安裝..."
 msgid "Please connect to begin the install..."
 msgstr "請連線以進行安裝..."
 
-#: ../anaconda:557 ../anaconda:738 ../gui.py:238 ../gui.py:982 ../rescue.py:40
+#: ../anaconda:560 ../anaconda:741 ../gui.py:238 ../gui.py:982 ../rescue.py:40
 #: ../rescue.py:224 ../rescue.py:302 ../rescue.py:330 ../rescue.py:340
 #: ../rescue.py:409 ../rescue.py:415 ../text.py:326 ../text.py:472
 #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:52
@@ -118,7 +118,7 @@ msgstr "請連線以進行安裝..."
 #: ../loader2/kickstart.c:116 ../loader2/kickstart.c:159
 #: ../loader2/kickstart.c:258 ../loader2/lang.c:102 ../loader2/lang.c:374
 #: ../loader2/loader.c:322 ../loader2/loader.c:335 ../loader2/loader.c:346
-#: ../loader2/loader.c:626 ../loader2/loader.c:801 ../loader2/mediacheck.c:255
+#: ../loader2/loader.c:628 ../loader2/loader.c:806 ../loader2/mediacheck.c:255
 #: ../loader2/mediacheck.c:312 ../loader2/mediacheck.c:354
 #: ../loader2/method.c:150 ../loader2/method.c:359 ../loader2/method.c:444
 #: ../loader2/modules.c:919 ../loader2/net.c:174 ../loader2/net.c:433
@@ -134,49 +134,49 @@ msgstr "請連線以進行安裝..."
 msgid "OK"
 msgstr "確定"
 
-#: ../anaconda:608
+#: ../anaconda:611
 msgid "Unknown Error"
 msgstr "不明的錯誤"
 
-#: ../anaconda:611
+#: ../anaconda:614
 #, c-format
 msgid "Error pulling second part of kickstart config: %s!"
 msgstr "讀取 kickstart 設定檔案的第二部份時發生錯誤: %s！"
 
-#: ../anaconda:723
+#: ../anaconda:726
 msgid ""
 "You do not have enough RAM to use the graphical installer.  Starting text "
 "mode."
 msgstr "您沒有足夠的記憶體可使用圖形安裝模式，進入文字安裝模式。"
 
-#: ../anaconda:775
+#: ../anaconda:778
 msgid "Install class forcing text mode installation"
 msgstr "強制進入文字模式安裝方式"
 
-#: ../anaconda:802
+#: ../anaconda:805
 msgid "No video hardware found, assuming headless"
 msgstr "找不到視訊的硬體，進入 headless 安裝模式"
 
-#: ../anaconda:813 ../anaconda:1060 ../bar.py:23
+#: ../anaconda:816 ../anaconda:1063 ../bar.py:23
 msgid "Unable to instantiate a X hardware state object."
 msgstr "無法舉例說明一個 X 硬體狀態的物件。"
 
-#: ../anaconda:837
+#: ../anaconda:840
 msgid "Graphical installation not available...  Starting text mode."
 msgstr "無法使用圖形模式安裝...  開始文字模式安裝。"
 
-#: ../anaconda:852
+#: ../anaconda:855
 msgid ""
 "No mouse was detected.  A mouse is required for graphical installation.  "
 "Starting text mode."
 msgstr "偵測不到滑鼠。 圖形模式安裝需要滑鼠。 開始文字模式安裝。"
 
-#: ../anaconda:862
+#: ../anaconda:865
 #, c-format
 msgid "Detected mouse type: %s"
 msgstr "偵測到的滑鼠類型: %s"
 
-#: ../anaconda:866
+#: ../anaconda:869
 #, c-format
 msgid "Using mouse type: %s"
 msgstr "使用滑鼠類型: %s"
@@ -405,7 +405,7 @@ msgstr "無法復原的錯誤"
 msgid "Your system will now be rebooted."
 msgstr "您的系統現在將重新開機。"
 
-#: ../autopart.py:1464 ../bootloader.py:148 ../gui.py:979 ../image.py:429
+#: ../autopart.py:1464 ../bootloader.py:148 ../gui.py:979 ../image.py:441
 #: ../partedUtils.py:273 ../partedUtils.py:303 ../partedUtils.py:806
 #: ../partedUtils.py:858 ../upgrade.py:310 ../upgrade.py:421 ../upgrade.py:474
 #: ../upgrade.py:497 ../upgrade.py:543 ../iw/blpasswidget.py:148
@@ -511,7 +511,7 @@ msgstr "已完成 [%d/%d]"
 msgid "Installing %s-%s-%s... "
 msgstr "正在安裝套件 %s-%s-%s... "
 
-#: ../comps.py:767 ../comps.py:795 ../hdrlist.py:747
+#: ../comps.py:767 ../comps.py:795 ../hdrlist.py:749
 msgid "Everything"
 msgstr "全部安裝"
 
@@ -519,11 +519,11 @@ msgstr "全部安裝"
 msgid "no suggestion"
 msgstr "沒有建議"
 
-#: ../comps.py:1098 ../hdrlist.py:970
+#: ../comps.py:1098 ../hdrlist.py:972
 msgid "Miscellaneous"
 msgstr "其他"
 
-#: ../comps.py:1114 ../hdrlist.py:45 ../hdrlist.py:917
+#: ../comps.py:1114 ../hdrlist.py:45 ../hdrlist.py:919
 msgid ""
 "This group includes all the packages available.  Note that there are "
 "substantially more packages than just the ones in all the other package "
@@ -532,7 +532,7 @@ msgstr ""
 "這個群組包括所有可使用的套件。 請注意，這個群組比起這一頁中所有其他的套件群組"
 "實質上含有更多的套件。"
 
-#: ../comps.py:1118 ../hdrlist.py:921
+#: ../comps.py:1118 ../hdrlist.py:923
 msgid ""
 "Choose this group to get the minimal possible set of packages.  Useful for "
 "creating small router/firewall boxes, for example."
@@ -540,7 +540,7 @@ msgstr ""
 "選擇這個群組將會安裝盡可能最小的套件組。  例如， 這在建立小型的路由器/防火牆"
 "機器時很有用。"
 
-#: ../constants.py:70
+#: ../constants.py:72
 msgid ""
 "An unhandled exception has occurred.  This is most likely a bug.  Please "
 "copy the full text of this exception or save the crash dump to a floppy then "
@@ -550,7 +550,7 @@ msgstr ""
 "一個例外狀況發生。 這極可能是一個程式錯誤。 請複製一份完整的文字敘述以及檔"
 "案， 並針對 anaconda 回報給 http://bugzilla.redhat.com/bugzilla/"
 
-#: ../constants.py:77
+#: ../constants.py:79
 msgid ""
 "An unhandled exception has occurred.  This is most likely a bug.  Please "
 "copy the full text of this exception and file a detailed bug report against "
@@ -609,9 +609,9 @@ msgstr "建立開機磁片(_M)"
 #: ../floppy.py:129 ../floppy.py:154 ../floppy.py:169 ../floppy.py:200
 #: ../fsset.py:592 ../fsset.py:1243 ../fsset.py:1262 ../fsset.py:1313
 #: ../fsset.py:1324 ../fsset.py:1359 ../fsset.py:1409 ../fsset.py:1453
-#: ../harddrive.py:165 ../image.py:130 ../image.py:168 ../image.py:486
-#: ../packages.py:150 ../packages.py:163 ../packages.py:175 ../packages.py:182
-#: ../packages.py:404 ../packages.py:579 ../packages.py:664
+#: ../harddrive.py:165 ../image.py:130 ../image.py:168 ../image.py:301
+#: ../image.py:498 ../packages.py:150 ../packages.py:163 ../packages.py:175
+#: ../packages.py:182 ../packages.py:408 ../packages.py:583 ../packages.py:668
 #: ../partedUtils.py:627 ../upgrade.py:341 ../upgrade.py:366 ../upgrade.py:393
 #: ../iw/osbootwidget.py:223 ../iw/osbootwidget.py:232
 #: ../iw/raid_dialog_gui.py:616 ../iw/raid_dialog_gui.py:655
@@ -622,7 +622,7 @@ msgstr "建立開機磁片(_M)"
 #: ../loader2/hdinstall.c:295 ../loader2/hdinstall.c:354
 #: ../loader2/hdinstall.c:567 ../loader2/hdinstall.c:649
 #: ../loader2/kickstart.c:258 ../loader2/lang.c:102 ../loader2/loader.c:346
-#: ../loader2/loader.c:626 ../loader2/mediacheck.c:255
+#: ../loader2/loader.c:628 ../loader2/mediacheck.c:255
 #: ../loader2/mediacheck.c:312 ../loader2/method.c:150 ../loader2/method.c:359
 #: ../loader2/method.c:444 ../loader2/nfsinstall.c:200
 #: ../loader2/nfsinstall.c:209 ../loader2/telnetd.c:84
@@ -838,8 +838,8 @@ msgstr ""
 "\n"
 "請修正這個問題，然後再重新啟動安裝程式。"
 
-#: ../fsset.py:2076 ../gui.py:1092 ../image.py:72 ../image.py:439
-#: ../packages.py:1421 ../iw/confirm_gui.py:68 ../iw/confirm_gui.py:98
+#: ../fsset.py:2076 ../gui.py:1092 ../image.py:72 ../image.py:451
+#: ../packages.py:1453 ../iw/confirm_gui.py:68 ../iw/confirm_gui.py:98
 #: ../textw/confirm_text.py:38 ../textw/confirm_text.py:64
 msgid "_Reboot"
 msgstr "重新開機(_R)"
@@ -965,7 +965,7 @@ msgstr ""
 "當試著要載入一個安裝程式的介面元件時發生一個錯誤。 \n"
 "className = %s"
 
-#: ../gui.py:1085 ../packages.py:187 ../packages.py:584 ../packages.py:1415
+#: ../gui.py:1085 ../packages.py:187 ../packages.py:588 ../packages.py:1447
 msgid "_Exit"
 msgstr "離開(_E)"
 
@@ -973,17 +973,17 @@ msgstr "離開(_E)"
 msgid "_Retry"
 msgstr "重試(_R)"
 
-#: ../gui.py:1088 ../packages.py:1418
+#: ../gui.py:1088 ../packages.py:1450
 msgid "Rebooting System"
 msgstr "重新啟動系統"
 
-#: ../gui.py:1089 ../packages.py:1419
+#: ../gui.py:1089 ../packages.py:1451
 msgid "Your system will now be rebooted..."
 msgstr "您的系統現在將重新開機..."
 
-#: ../gui.py:1180 ../packages.py:1421 ../iw/confirm_gui.py:68
+#: ../gui.py:1180 ../packages.py:1453 ../iw/confirm_gui.py:68
 #: ../iw/confirm_gui.py:98 ../textw/confirm_text.py:38
-#: ../textw/confirm_text.py:64 ../textw/firewall_text.py:202
+#: ../textw/confirm_text.py:64 ../textw/firewall_text.py:203
 msgid "_Back"
 msgstr "上一步(_B)"
 
@@ -1025,7 +1025,7 @@ msgstr "無法載入標題列"
 msgid "Install Window"
 msgstr "安裝視窗"
 
-#: ../harddrive.py:166 ../image.py:487
+#: ../harddrive.py:166 ../image.py:499
 #, python-format
 msgid ""
 "The following ISO images are missing which are required for the install:\n"
@@ -1057,7 +1057,7 @@ msgstr ""
 "請在開始安裝之前準備好這些光碟片，假如您需要放棄安裝並且重新開機，請選擇 『重"
 "新開機』。"
 
-#: ../image.py:72 ../image.py:440 ../kickstart.py:1340 ../kickstart.py:1367
+#: ../image.py:72 ../image.py:452 ../kickstart.py:1342 ../kickstart.py:1369
 #: ../iw/partition_gui.py:1012
 msgid "_Continue"
 msgstr "繼續(_C)"
@@ -1085,53 +1085,59 @@ msgid ""
 "probably out of disk space."
 msgstr "在轉換安裝映像檔到硬碟時發生了一個錯誤。 你的硬碟空間可能不夠。"
 
-#: ../image.py:283
+#: ../image.py:259
+msgid "Change CDROM"
+msgstr "其他類型的光碟機"
+
+#: ../image.py:260
+#, python-format
+msgid "Please insert disc %d to continue."
+msgstr "請插入光碟片 %d 以繼續。"
+
+#: ../image.py:295
 msgid "Wrong CDROM"
 msgstr "錯誤的光碟"
 
-#: ../image.py:284
+#: ../image.py:296
 #, python-format
 msgid "That's not the correct %s CDROM."
 msgstr "這不是正確的 %s CD-ROM。"
 
-#: ../image.py:287
-msgid "Change CDROM"
-msgstr "其他類型的光碟機"
-
-#: ../image.py:288
-#, python-format
-msgid "Please insert disc %d to continue."
-msgstr "請插入光碟片 %d 以繼續。"
+#: ../image.py:302
+msgid "The CDROM could not be mounted."
+msgstr "這張光碟片無法被掛載"
 
 #: ../installclass.py:59
 msgid "Install on System"
 msgstr "完整安裝"
 
-#: ../kickstart.py:1332
+#: ../kickstart.py:1334
 msgid "Missing Package"
 msgstr "套件遺失"
 
-#: ../kickstart.py:1333
+#: ../kickstart.py:1335
 #, python-format
 msgid ""
 "You have specified that the package '%s' should be installed.  This package "
 "does not exist. Would you like to continue or abort your installation?"
-msgstr "您已經指定要安裝 '%s' 套件，這個套件並不存在。 您想要繼續或中斷您的安裝？"
+msgstr ""
+"您已經指定要安裝 '%s' 套件，這個套件並不存在。 您想要繼續或中斷您的安裝？"
 
-#: ../kickstart.py:1339 ../kickstart.py:1366
+#: ../kickstart.py:1341 ../kickstart.py:1368
 msgid "_Abort"
 msgstr "中斷(_A)"
 
-#: ../kickstart.py:1358
+#: ../kickstart.py:1360
 msgid "Missing Group"
 msgstr "群組遺失"
 
-#: ../kickstart.py:1359
+#: ../kickstart.py:1361
 #, python-format
 msgid ""
 "You have specified that the group '%s' should be installed.  This group does "
 "not exist. Would you like to continue or abort your installation?"
-msgstr "您指定要安裝 '%s' 群組，不過這個群組並不存在，您想要繼續或中斷您的安裝程式？"
+msgstr ""
+"您指定要安裝 '%s' 群組，不過這個群組並不存在，您想要繼續或中斷您的安裝程式？"
 
 #: ../network.py:41
 msgid "Hostname must be 64 or less characters in length."
@@ -1174,21 +1180,24 @@ msgstr "正在讀取套件資訊..."
 msgid ""
 "Unable to read header list.  This may be due to a missing file or bad "
 "media.  Press <return> to try again."
-msgstr "無法讀取表頭清單。 可能是由於遺失檔案或是媒體損毀。 請按 <return> 重試。"
+msgstr ""
+"無法讀取表頭清單。 可能是由於遺失檔案或是媒體損毀。 請按 <return> 重試。"
 
 #: ../packages.py:164
 msgid ""
 "Unable to read comps file.  This may be due to a missing file or bad media.  "
 "Press <return> to try again."
-msgstr "無法讀取 comps 檔案。 可能是由於遺失檔案或是媒體損毀。 請按 <return> 重試。"
+msgstr ""
+"無法讀取 comps 檔案。 可能是由於遺失檔案或是媒體損毀。 請按 <return> 重試。"
 
-#: ../packages.py:176 ../packages.py:665 ../upgrade.py:342
+#: ../packages.py:176 ../packages.py:669 ../upgrade.py:342
 msgid ""
 "Unable to merge header list.  This may be due to a missing file or bad "
 "media.  Press <return> to try again."
-msgstr "無法合併表頭清單。 可能是由於遺失檔案或是媒體損毀。 請按 <return> 重試。"
+msgstr ""
+"無法合併表頭清單。 可能是由於遺失檔案或是媒體損毀。 請按 <return> 重試。"
 
-#: ../packages.py:183 ../packages.py:580
+#: ../packages.py:183 ../packages.py:584
 #, python-format
 msgid ""
 "You are trying to install on a machine which isn't supported by this release "
@@ -1203,7 +1212,7 @@ msgstr "套件相依性檢查"
 msgid "Checking dependencies in packages selected for installation..."
 msgstr "檢查安裝套件的相依性"
 
-#: ../packages.py:349 ../packages.py:763
+#: ../packages.py:349 ../packages.py:767
 msgid "Processing"
 msgstr "處理中"
 
@@ -1211,7 +1220,7 @@ msgstr "處理中"
 msgid "Preparing to install..."
 msgstr "正在準備安裝..."
 
-#: ../packages.py:405
+#: ../packages.py:409
 #, python-format
 msgid ""
 "The package %s-%s-%s cannot be opened. This is due to a missing file or "
@@ -1224,15 +1233,15 @@ msgstr ""
 "安裝，通常這表示該 CD 媒體已毀損，或者光碟機無法讀取該媒體。 \n"
 "請按 <return> 鍵以重試。"
 
-#: ../packages.py:413
+#: ../packages.py:417
 msgid "Installing..."
 msgstr "安裝中..."
 
-#: ../packages.py:434
+#: ../packages.py:438
 msgid "Error Installing Package"
 msgstr "安裝套件發生錯誤"
 
-#: ../packages.py:435
+#: ../packages.py:439
 #, python-format
 msgid ""
 "There was an error installing %s.  This can indicate media failure, lack of "
@@ -1247,11 +1256,11 @@ msgstr ""
 "\n"
 "請按下『確定』重新啟動您的系統。"
 
-#: ../packages.py:764
+#: ../packages.py:768
 msgid "Preparing RPM transaction..."
 msgstr "正在設定 RPM 處理程序..."
 
-#: ../packages.py:847
+#: ../packages.py:851
 #, python-format
 msgid ""
 "Upgrading %s packages\n"
@@ -1260,7 +1269,7 @@ msgstr ""
 "正在升級 %s 套件 \n"
 "\n"
 
-#: ../packages.py:849
+#: ../packages.py:853
 #, python-format
 msgid ""
 "Installing %s packages\n"
@@ -1269,17 +1278,17 @@ msgstr ""
 "正在安裝 %s 套件 \n"
 "\n"
 
-#: ../packages.py:857 ../packages.py:1153
+#: ../packages.py:861 ../packages.py:1161
 #, python-format
 msgid "Upgrading %s-%s-%s.%s.\n"
 msgstr "正在升級 %s-%s-%s.%s.\n"
 
-#: ../packages.py:859 ../packages.py:1155
+#: ../packages.py:863 ../packages.py:1163
 #, python-format
 msgid "Installing %s-%s-%s.%s.\n"
 msgstr "正在安裝套件 %s-%s-%s.%s.\n"
 
-#: ../packages.py:875
+#: ../packages.py:879
 #, python-format
 msgid ""
 "\n"
@@ -1296,15 +1305,15 @@ msgstr ""
 "\n"
 "\n"
 
-#: ../packages.py:881
+#: ../packages.py:885
 msgid "Install Starting"
 msgstr "安裝開始"
 
-#: ../packages.py:882
+#: ../packages.py:886
 msgid "Starting install process, this may take several minutes..."
 msgstr "開始安裝程序，這要花上幾分鐘..."
 
-#: ../packages.py:922
+#: ../packages.py:926
 msgid ""
 "You don't appear to have enough disk space to install the packages you've "
 "selected. You need more space on the following file systems:\n"
@@ -1314,17 +1323,17 @@ msgstr ""
 "間:\n"
 "\n"
 
-#: ../packages.py:926 ../packages.py:947 ../iw/lvm_dialog_gui.py:1064
+#: ../packages.py:930 ../packages.py:951 ../iw/lvm_dialog_gui.py:1064
 #: ../iw/partition_gui.py:358 ../iw/upgrade_swap_gui.py:148
 #: ../textw/partition_text.py:1126 ../textw/upgrade_text.py:111
 msgid "Mount Point"
 msgstr "掛載點"
 
-#: ../packages.py:927
+#: ../packages.py:931
 msgid "Space Needed"
 msgstr "需求空間"
 
-#: ../packages.py:943
+#: ../packages.py:947
 msgid ""
 "You don't appear to have enough file nodes to install the packages you've "
 "selected. You need more file nodes on the following file systems:\n"
@@ -1334,23 +1343,23 @@ msgstr ""
 "節點:\n"
 "\n"
 
-#: ../packages.py:948
+#: ../packages.py:952
 msgid "Nodes Needed"
 msgstr "需求節點"
 
-#: ../packages.py:959
+#: ../packages.py:963
 msgid "Disk Space"
 msgstr "磁碟空間"
 
-#: ../packages.py:1008
+#: ../packages.py:1012
 msgid "Post Install"
 msgstr "最後階段安裝"
 
-#: ../packages.py:1009
+#: ../packages.py:1013
 msgid "Performing post install configuration..."
 msgstr "執行最後階段安裝設定..."
 
-#: ../packages.py:1179
+#: ../packages.py:1187
 msgid ""
 "\n"
 "\n"
@@ -1360,7 +1369,7 @@ msgstr ""
 "\n"
 "以下套件已收入此版本但並沒有升級 \n"
 
-#: ../packages.py:1182
+#: ../packages.py:1190
 msgid ""
 "\n"
 "\n"
@@ -1370,11 +1379,11 @@ msgstr ""
 "\n"
 "以下套件已收入此版本但並沒有安裝:\n"
 
-#: ../packages.py:1401
+#: ../packages.py:1433
 msgid "Warning! This is pre-release software!"
 msgstr "警告！ 這是測試版的軟體！"
 
-#: ../packages.py:1402
+#: ../packages.py:1434
 #, python-format
 msgid ""
 "Thank you for downloading this pre-release of %s.\n"
@@ -1400,7 +1409,7 @@ msgstr ""
 "\n"
 "並針對 '%s' 呈送一份報告。\n"
 
-#: ../packages.py:1415
+#: ../packages.py:1447
 msgid "_Install anyway"
 msgstr "繼續安裝 (_I)"
 
@@ -1773,7 +1782,8 @@ msgid "Confirm Reset"
 msgstr "確認還原"
 
 #: ../partIntfHelpers.py:528
-msgid "Are you sure you want to reset the partition table to its original state?"
+msgid ""
+"Are you sure you want to reset the partition table to its original state?"
 msgstr "您確定要重設磁碟分割表至原設定值?"
 
 #: ../partitioning.py:77
@@ -1785,7 +1795,8 @@ msgid ""
 "The partitioning options you have chosen have already been activated. You "
 "can no longer return to the disk editing screen. Would you like to continue "
 "with the installation process?"
-msgstr "您選擇的磁碟分割選項已經啟動了。 您無法再回到磁碟編輯視窗。 您想要繼續安裝嗎?"
+msgstr ""
+"您選擇的磁碟分割選項已經啟動了。 您無法再回到磁碟編輯視窗。 您想要繼續安裝嗎?"
 
 #: ../partitioning.py:108
 msgid "Low Memory"
@@ -1815,7 +1826,8 @@ msgid ""
 msgstr "您的 root 分割區小於 250 MB，空間太小不足以安裝 %s。"
 
 #: ../partitions.py:768
-msgid "You must create a /boot/efi partition of type FAT and a size of 50 megabytes."
+msgid ""
+"You must create a /boot/efi partition of type FAT and a size of 50 megabytes."
 msgstr "您必須建立一個 FAT 類型的 /boot/efi 分割區,大小為 50 MB。"
 
 #: ../partitions.py:791
@@ -1857,7 +1869,8 @@ msgstr "您指定了超過 32 個 swap 裝置。 %s 的核心只支援到 32 個
 msgid ""
 "You have allocated less swap space (%dM) than available RAM (%dM) on your "
 "system.  This could negatively impact performance."
-msgstr "您配置了比您系統記憶體 (%dM) 還要少的 swap 空間 (%dM)。 這可能會影響效能。"
+msgstr ""
+"您配置了比您系統記憶體 (%dM) 還要少的 swap 空間 (%dM)。 這可能會影響效能。"
 
 #: ../partitions.py:1159
 msgid "the partition in use by the installer."
@@ -1873,7 +1886,8 @@ msgstr "LVM 磁區群組成員的一個分割區。"
 
 #: ../partRequests.py:233
 #, python-format
-msgid "This mount point is invalid.  The %s directory must be on the / file system."
+msgid ""
+"This mount point is invalid.  The %s directory must be on the / file system."
 msgstr "掛載點無效。  %s 目錄必須在 / 檔案系統上。"
 
 #: ../partRequests.py:236
@@ -2106,7 +2120,8 @@ msgid "%s (C) 2004 Red Hat, Inc."
 msgstr "%s (C) 2004 Red Hat, Inc."
 
 #: ../text.py:354
-msgid " <F1> for help | <Tab> between elements | <Space> selects | <F12> next screen"
+msgid ""
+" <F1> for help | <Tab> between elements | <Space> selects | <F12> next screen"
 msgstr "      <F1> 輔助訊息 | <Tab> 移動游標 | <space> 選取 | <F12> 下一個畫面"
 
 #: ../text.py:356
@@ -2920,15 +2935,15 @@ msgstr "使用 fdisk 做磁碟分割"
 msgid "Select a drive to partition with fdisk:"
 msgstr "選擇要執行 fdisk 的磁碟機:"
 
-#: ../iw/firewall_gui.py:23 ../textw/firewall_text.py:27
+#: ../iw/firewall_gui.py:25 ../textw/firewall_text.py:28
 msgid "Firewall"
 msgstr "防火牆"
 
-#: ../iw/firewall_gui.py:33 ../textw/firewall_text.py:194
+#: ../iw/firewall_gui.py:35 ../textw/firewall_text.py:195
 msgid "Warning - No Firewall"
 msgstr "警告 - 無防火牆"
 
-#: ../iw/firewall_gui.py:34 ../textw/firewall_text.py:195
+#: ../iw/firewall_gui.py:36 ../textw/firewall_text.py:196
 msgid ""
 "If this system is attached directly to the Internet or is on a large public "
 "network, it is recommended that a firewall be configured to help prevent "
@@ -2940,16 +2955,16 @@ msgstr ""
 "\"繼續\" 以不設定防火牆來繼續安裝程式。"
 
 # ../comps/comps-master:751
-#: ../iw/firewall_gui.py:41
+#: ../iw/firewall_gui.py:43
 msgid "_Configure Firewall"
 msgstr "設定防火牆(_C)"
 
-#: ../iw/firewall_gui.py:41 ../iw/xconfig_gui.py:444
-#: ../textw/firewall_text.py:202
+#: ../iw/firewall_gui.py:43 ../iw/xconfig_gui.py:444
+#: ../textw/firewall_text.py:203
 msgid "_Proceed"
 msgstr "繼續(_P)"
 
-#: ../iw/firewall_gui.py:129
+#: ../iw/firewall_gui.py:131
 #, python-format
 msgid ""
 "Invalid port given: %s.  The proper format is 'port:protocol', where port is "
@@ -2962,61 +2977,62 @@ msgstr ""
 "\n"
 "例如，'1234:udp'"
 
-#: ../iw/firewall_gui.py:133
+#: ../iw/firewall_gui.py:135
 msgid "Warning: Bad Token"
 msgstr "警告: 不當的記號"
 
-#: ../iw/firewall_gui.py:159 ../textw/firewall_text.py:29
+#: ../iw/firewall_gui.py:161 ../textw/firewall_text.py:30
 msgid ""
 "A firewall can help prevent unauthorized access to your computer from the "
 "outside world.  Would you like to enable a firewall?"
 msgstr "一個防火牆可以防止外來未經授權的存取您的電腦，您想要啟用防火牆嗎？"
 
-#: ../iw/firewall_gui.py:167
+#: ../iw/firewall_gui.py:169
 msgid "N_o firewall"
 msgstr "無防火牆(_o)"
 
-#: ../iw/firewall_gui.py:169
+#: ../iw/firewall_gui.py:171
 msgid "_Enable firewall"
 msgstr "啟用防火牆(_E)"
 
-#: ../iw/firewall_gui.py:171
+#: ../iw/firewall_gui.py:173
 msgid "_Custom firewall"
 msgstr "自訂防火牆(_C)"
 
-#: ../iw/firewall_gui.py:189
+#: ../iw/firewall_gui.py:191
 msgid "What services should be allowed to pass through the firewall?"
 msgstr "要允許那些服務通過防火牆？"
 
-#: ../iw/firewall_gui.py:197
+#: ../iw/firewall_gui.py:199
 msgid "_Allow incoming:"
 msgstr "允許進入(_A):"
 
-#: ../iw/firewall_gui.py:222
+#: ../iw/firewall_gui.py:224
 msgid "Other _ports:"
 msgstr "其他埠(_p):"
 
-#: ../iw/firewall_gui.py:230
+#: ../iw/firewall_gui.py:232
 msgid "If you would like to allow all traffic from a device, select it below."
 msgstr "假如您想要允許來自一個裝置的所有流量，請於以下選取。"
 
-#: ../iw/firewall_gui.py:239
+#: ../iw/firewall_gui.py:241
 msgid "_Trusted devices:"
 msgstr "信任裝置(_T):"
 
-#: ../iw/firewall_gui.py:277
-msgid "_Security Enhanced Linux (SELinux) Extentions:"
+#: ../iw/firewall_gui.py:279
+#, fuzzy
+msgid "_Security Enhanced Linux (SELinux) Extensions:"
 msgstr "安全強化 Linux (SELinux) 的延伸套件(_S)："
 
-#: ../iw/firewall_gui.py:283
+#: ../iw/firewall_gui.py:285
 msgid "Disabled"
 msgstr "停用"
 
-#: ../iw/firewall_gui.py:283
+#: ../iw/firewall_gui.py:285
 msgid "Warn"
 msgstr "警告"
 
-#: ../iw/firewall_gui.py:283 ../textw/firewall_text.py:260
+#: ../iw/firewall_gui.py:285 ../textw/firewall_text.py:265
 msgid "Active"
 msgstr "啟用"
 
@@ -3134,7 +3150,8 @@ msgstr "太小"
 msgid ""
 "This change in the value of the physical extent will waste substantial space "
 "on one or more of the physical volumes in the volume group."
-msgstr "這個實體容量數值的變更將會浪費在磁區群組中一或更多的實體磁區上相當大的空間。"
+msgstr ""
+"這個實體容量數值的變更將會浪費在磁區群組中一或更多的實體磁區上相當大的空間。"
 
 #: ../iw/lvm_dialog_gui.py:205
 #, python-format
@@ -3477,7 +3494,8 @@ msgstr "您還未指定一個主機名稱。  取決於您的網路環境，這�
 msgid ""
 "You have not specified the field \"%s\".  Depending on your network "
 "environment this may cause problems later."
-msgstr "您還未指定 \"%s\" 欄位。  取決於您的網路環境，這樣的設定也許會造成問題。"
+msgstr ""
+"您還未指定 \"%s\" 欄位。  取決於您的網路環境，這樣的設定也許會造成問題。"
 
 #: ../iw/network_gui.py:164 ../textw/network_text.py:399
 #, python-format
@@ -3861,12 +3879,14 @@ msgid "Partitioning"
 msgstr "設定分割區"
 
 #: ../iw/partition_gui.py:639
-msgid "The following critical errors exist with your requested partitioning scheme."
+msgid ""
+"The following critical errors exist with your requested partitioning scheme."
 msgstr "您的磁碟分割發生下列錯誤。"
 
 #: ../iw/partition_gui.py:642
 #, python-format
-msgid "These errors must be corrected prior to continuing with your install of %s."
+msgid ""
+"These errors must be corrected prior to continuing with your install of %s."
 msgstr "在您繼續安裝 %s 之前必須先更正這些錯誤。"
 
 #: ../iw/partition_gui.py:648
@@ -3957,7 +3977,8 @@ msgstr "找不到 RAID minors 的裝置號碼"
 msgid ""
 "A software RAID device cannot be created because all of the available RAID "
 "minor device numbers have been used."
-msgstr "無法建立軟體 RAID 裝置，因為所有的 RAID minors 裝置號碼都已經被使用了。"
+msgstr ""
+"無法建立軟體 RAID 裝置，因為所有的 RAID minors 裝置號碼都已經被使用了。"
 
 #: ../iw/partition_gui.py:1227
 msgid "RAID Options"
@@ -4457,7 +4478,8 @@ msgstr "這將會更新您目前的開機管理程式。"
 
 #: ../iw/upgrade_bootloader_gui.py:72 ../textw/upgrade_bootloader_text.py:49
 #, python-format
-msgid "The installer has detected the %s boot loader currently installed on %s."
+msgid ""
+"The installer has detected the %s boot loader currently installed on %s."
 msgstr "安裝程式偵測到 %s 開機管理程式已安裝在 %s。"
 
 #: ../iw/upgrade_bootloader_gui.py:76
@@ -4584,7 +4606,8 @@ msgid "The swap file must be between 1 and 2000 MB in size."
 msgstr "swap 檔案必須介於 1 至 2000 MB 之間。"
 
 #: ../iw/upgrade_swap_gui.py:216 ../textw/upgrade_text.py:173
-msgid "There is not enough space on the device you selected for the swap partition."
+msgid ""
+"There is not enough space on the device you selected for the swap partition."
 msgstr "您所選擇的磁碟機空間不足以建立 swap 分割區。"
 
 #: ../iw/xconfig_gui.py:35 ../textw/xconfig_text.py:23
@@ -4905,7 +4928,8 @@ msgstr ""
 "區，並分別給予一個開機識別標籤。"
 
 #: ../textw/bootloader_text.py:315
-msgid " <Space> selects button | <F2> select default boot entry | <F12> next screen>"
+msgid ""
+" <Space> selects button | <F2> select default boot entry | <F12> next screen>"
 msgstr "      <Space> 選取按鈕 | <F2> 選取預設開機登錄 | <F12> 下一個畫面"
 
 #: ../textw/bootloader_text.py:394
@@ -5009,7 +5033,8 @@ msgstr "開始安裝"
 msgid ""
 "A complete log of your installation will be in %s after rebooting your "
 "system. You may want to keep this file for later reference."
-msgstr "重新開機後，完整的安裝過程會記錄在 %s。您可以留下這個檔案以供日後參考。"
+msgstr ""
+"重新開機後，完整的安裝過程會記錄在 %s。您可以留下這個檔案以供日後參考。"
 
 #: ../textw/confirm_text.py:26 ../textw/confirm_text.py:28
 #: ../textw/confirm_text.py:52 ../textw/confirm_text.py:54
@@ -5019,7 +5044,7 @@ msgstr "重新開機後，完整的安裝過程會記錄在 %s。您可以留下
 #: ../loader2/driverselect.c:73 ../loader2/driverselect.c:187
 #: ../loader2/driverselect.c:213 ../loader2/hdinstall.c:462
 #: ../loader2/hdinstall.c:516 ../loader2/kbd.c:125 ../loader2/loader.c:322
-#: ../loader2/loader.c:801 ../loader2/loader.c:823 ../loader2/net.c:174
+#: ../loader2/loader.c:806 ../loader2/loader.c:828 ../loader2/net.c:174
 #: ../loader2/net.c:433 ../loader2/net.c:868 ../loader2/nfsinstall.c:54
 #: ../loader2/urls.c:254 ../loader2/urls.c:444
 msgid "Back"
@@ -5034,7 +5059,8 @@ msgstr "開始升級系統"
 msgid ""
 "A complete log of your upgrade will be in %s after rebooting your system. "
 "You may want to keep this file for later reference."
-msgstr "重新開機後，完整的升級過程會記錄在 %s。您可以留下這個檔案以供日後參考。"
+msgstr ""
+"重新開機後，完整的升級過程會記錄在 %s。您可以留下這個檔案以供日後參考。"
 
 #: ../textw/desktop_choice_text.py:27
 #, python-format
@@ -5110,65 +5136,65 @@ msgstr ""
 msgid "Choose a disk to run fdisk on"
 msgstr "選擇要執行 fdisk 的磁碟機"
 
-#: ../textw/firewall_text.py:25
+#: ../textw/firewall_text.py:26
 msgid "Customize"
 msgstr "自訂"
 
-#: ../textw/firewall_text.py:46
+#: ../textw/firewall_text.py:47
 msgid "Enable firewall"
 msgstr "啟用防火牆"
 
-#: ../textw/firewall_text.py:49
+#: ../textw/firewall_text.py:50
 msgid "No firewall"
 msgstr "無防火牆"
 
-#: ../textw/firewall_text.py:68
+#: ../textw/firewall_text.py:69
 msgid "Trusted Devices:"
 msgstr "信任裝置:"
 
-#: ../textw/firewall_text.py:78
+#: ../textw/firewall_text.py:79
 msgid "Allow incoming:"
 msgstr "允許進入:"
 
-#: ../textw/firewall_text.py:83
+#: ../textw/firewall_text.py:84
 msgid "SSH"
 msgstr "SSH"
 
-#: ../textw/firewall_text.py:85 ../loader2/telnetd.c:80
+#: ../textw/firewall_text.py:86 ../loader2/telnetd.c:80
 #: ../loader2/telnetd.c:122
 msgid "Telnet"
 msgstr "Telnet"
 
-#: ../textw/firewall_text.py:87
+#: ../textw/firewall_text.py:88
 msgid "WWW (HTTP)"
 msgstr "WWW (HTTP)"
 
-#: ../textw/firewall_text.py:89
+#: ../textw/firewall_text.py:90
 msgid "Mail (SMTP)"
 msgstr "Mail (SMTP)"
 
-#: ../textw/firewall_text.py:91
+#: ../textw/firewall_text.py:92
 msgid "FTP"
 msgstr "FTP"
 
-#: ../textw/firewall_text.py:95
+#: ../textw/firewall_text.py:96
 msgid "Other ports"
 msgstr "其他連接埠"
 
-#: ../textw/firewall_text.py:121 ../textw/firewall_text.py:184
+#: ../textw/firewall_text.py:122 ../textw/firewall_text.py:185
 #: ../textw/language_text.py:145
 msgid "Invalid Choice"
 msgstr "無效的選擇"
 
-#: ../textw/firewall_text.py:122
+#: ../textw/firewall_text.py:123
 msgid "You cannot customize a disabled firewall."
 msgstr "無法自訂停用的防火牆設定。"
 
-#: ../textw/firewall_text.py:127
+#: ../textw/firewall_text.py:128
 msgid "Firewall Configuration - Customize"
 msgstr "防火牆設定 - 自訂"
 
-#: ../textw/firewall_text.py:129
+#: ../textw/firewall_text.py:130
 msgid ""
 "You can customize your firewall in two ways. First, you can select to allow "
 "all traffic from certain network interfaces. Second, you can allow certain "
@@ -5179,27 +5205,29 @@ msgstr ""
 "量。 第二，您可以允許某個通過防火牆的通訊協定。 若要指定其他的連接埠， 可以逗"
 "點隔開並以下列的格式 'service:protocol'，例如 'imap:tcp'。"
 
-#: ../textw/firewall_text.py:185
+#: ../textw/firewall_text.py:186
 #, python-format
 msgid "Warning: %s is not a valid port."
 msgstr "警告: %s 不是一個有效的連接埠。"
 
-#: ../textw/firewall_text.py:246
+#: ../textw/firewall_text.py:251
 msgid "Security Enhanced Linux"
 msgstr "安全強化 Linux"
 
-#: ../textw/firewall_text.py:248
+#: ../textw/firewall_text.py:253
 msgid ""
 "Security Enhanced Linux (SELinux) provides stricter access controls to "
 "improve the security of your system.  How would you like this support "
 "enabled?"
-msgstr "安全強化 Linux (SELinux) 提供更加嚴密的存取控制以增加系統的安全性，您想要啟用這個特色的支援嗎？"
+msgstr ""
+"安全強化 Linux (SELinux) 提供更加嚴密的存取控制以增加系統的安全性，您想要啟用"
+"這個特色的支援嗎？"
 
-#: ../textw/firewall_text.py:256
+#: ../textw/firewall_text.py:261
 msgid "Disable SELinux"
 msgstr "停用 SELinux"
 
-#: ../textw/firewall_text.py:258
+#: ../textw/firewall_text.py:263
 msgid "Warn on violations"
 msgstr "違反時發出警告"
 
@@ -5367,7 +5395,8 @@ msgid "Select individual packages"
 msgstr "選擇個別套件"
 
 #: ../textw/packages_text.py:73
-msgid "<Space>,<+>,<-> selection   |   <F2> Group Details   |   <F12> next screen"
+msgid ""
+"<Space>,<+>,<-> selection   |   <F2> Group Details   |   <F12> next screen"
 msgstr "      <Space>,<+>,<-> 選擇   |   <F2> 群組細節   |   <F12> 下一個畫面"
 
 #: ../textw/packages_text.py:117
@@ -5392,7 +5421,8 @@ msgid "Total size"
 msgstr "全部大小"
 
 #: ../textw/packages_text.py:326
-msgid "   <Space>,<+>,<-> selection   |   <F1> help   |   <F2> package description"
+msgid ""
+"   <Space>,<+>,<-> selection   |   <F1> help   |   <F2> package description"
 msgstr "      <Space>,<+>,<-> 選擇   |   <F1> 輔助訊息   |   <F2> 套件說明"
 
 #: ../textw/packages_text.py:374
@@ -5615,7 +5645,8 @@ msgid "RAID"
 msgstr "RAID"
 
 #: ../textw/partition_text.py:1136
-msgid "    F1-Help     F2-New      F3-Edit   F4-Delete    F5-Reset    F12-OK        "
+msgid ""
+"    F1-Help     F2-New      F3-Edit   F4-Delete    F5-Reset    F12-OK        "
 msgstr "    F1-求助     F2-新增     F3-修改    F4-刪除    F5-重置     F12-確定"
 
 #: ../textw/partition_text.py:1165
@@ -5875,11 +5906,13 @@ msgid "User Exists"
 msgstr "使用者已經存在"
 
 #: ../textw/userauth_text.py:156
-msgid "The root user is already configured. You don't need to add this user here."
+msgid ""
+"The root user is already configured. You don't need to add this user here."
 msgstr "使用者 root 已經設定完成。你不需要在這裡增加這個使用者。"
 
 #: ../textw/userauth_text.py:163
-msgid "This system user is already configured. You don't need to add this user here."
+msgid ""
+"This system user is already configured. You don't need to add this user here."
 msgstr "使用者 root 已經設定好了。你不需要在這裡增加這個使用者。"
 
 #: ../textw/userauth_text.py:171
@@ -6173,7 +6206,8 @@ msgstr "顯示記憶體"
 msgid ""
 "Please select the amount of video RAM present on your video card. Choose '%"
 "s' to reset the selection to the amount the installer detected on your card."
-msgstr "請選擇您顯示卡的顯示記憶體容量。 選擇 '%s' 來重設安裝程式所偵測到的值。"
+msgstr ""
+"請選擇您顯示卡的顯示記憶體容量。 選擇 '%s' 來重設安裝程式所偵測到的值。"
 
 #: ../textw/xconfig_text.py:629
 msgid "Skip X Configuration"
@@ -6224,7 +6258,8 @@ msgstr "自訂安裝(_C)"
 msgid ""
 "Select this installation type to gain complete control over the installation "
 "process, including software package selection and partitioning."
-msgstr "選擇這個安裝類型來獲取對安裝過程完全的控制，包括軟體套件的選擇與磁碟分割。"
+msgstr ""
+"選擇這個安裝類型來獲取對安裝過程完全的控制，包括軟體套件的選擇與磁碟分割。"
 
 #: ../installclasses/personal_desktop.py:11
 msgid "_Personal Desktop"
@@ -6368,7 +6403,8 @@ msgstr ""
 msgid ""
 "No %s CD was found which matches your boot media.  Please insert the %s CD "
 "and press %s to retry."
-msgstr "在您的光碟機中找不到開機媒體光碟片 %s，請置入 %s 光碟片，並按下 %s 重試。"
+msgstr ""
+"在您的光碟機中找不到開機媒體光碟片 %s，請置入 %s 光碟片，並按下 %s 重試。"
 
 #: ../loader2/cdinstall.c:380
 msgid "CD Not Found"
@@ -6599,7 +6635,8 @@ msgid "Welcome to %s"
 msgstr "歡迎使用 %s"
 
 #: ../loader2/lang.c:53 ../loader2/loader.c:174
-msgid "  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
+msgid ""
+"  <Tab>/<Alt-Tab> between elements  | <Space> selects | <F12> next screen "
 msgstr "      <Tab>/<Alt-Tab> 移動游標 | <Space> 選取 | <F12> 下一個畫面"
 
 #: ../loader2/lang.c:371
@@ -6658,40 +6695,40 @@ msgstr ""
 "找不到硬碟裝置，為使安裝順利進行，或許您需要手動選取該裝置的驅動程式。 現在您"
 "想要選取驅動程式嗎？"
 
-#: ../loader2/loader.c:623
+#: ../loader2/loader.c:625
 #, c-format
 msgid "You do not have enough RAM to install %s on this machine."
 msgstr "本機器沒有足夠的記憶體可供安裝 %s。"
 
-#: ../loader2/loader.c:793
+#: ../loader2/loader.c:798
 msgid "Rescue Method"
 msgstr "救援方式"
 
-#: ../loader2/loader.c:794
+#: ../loader2/loader.c:799
 msgid "Installation Method"
 msgstr "安裝方式"
 
-#: ../loader2/loader.c:796
+#: ../loader2/loader.c:801
 msgid "What type of media contains the rescue image?"
 msgstr "您的救援映像檔存放在那一種媒體上呢？"
 
-#: ../loader2/loader.c:798
+#: ../loader2/loader.c:803
 msgid "What type of media contains the packages to be installed?"
 msgstr "您想安裝的套件是放在那一種儲存媒體上呢？"
 
-#: ../loader2/loader.c:822
+#: ../loader2/loader.c:827
 msgid "No driver found"
 msgstr "找不到驅動程式"
 
-#: ../loader2/loader.c:822
+#: ../loader2/loader.c:827
 msgid "Select driver"
 msgstr "選擇驅動程式"
 
-#: ../loader2/loader.c:823
+#: ../loader2/loader.c:828
 msgid "Use a driver disk"
 msgstr "使用驅動程式的磁片"
 
-#: ../loader2/loader.c:824
+#: ../loader2/loader.c:829
 msgid ""
 "Unable to find any devices of the type needed for this installation type.  "
 "Would you like to manually select your driver or use a driver disk?"
@@ -6700,39 +6737,39 @@ msgstr ""
 "您想要手動選取您的驅動程式或使用驅動\n"
 "程式磁片？"
 
-#: ../loader2/loader.c:984
+#: ../loader2/loader.c:989
 msgid "The following devices have been found on your system."
 msgstr "已經在您的系統上找到下列裝置。"
 
-#: ../loader2/loader.c:986
+#: ../loader2/loader.c:991
 msgid ""
 "No device drivers have been loaded for your system.  Would you like to load "
 "any now?"
 msgstr "並沒有為您的系統載入任何的裝置驅動程式，您想要現在載入嗎？"
 
-#: ../loader2/loader.c:990
+#: ../loader2/loader.c:995
 msgid "Devices"
 msgstr "裝置"
 
-#: ../loader2/loader.c:991
+#: ../loader2/loader.c:996
 msgid "Done"
 msgstr "完成"
 
-#: ../loader2/loader.c:992
+#: ../loader2/loader.c:997
 msgid "Add Device"
 msgstr "新增裝置"
 
-#: ../loader2/loader.c:1092
+#: ../loader2/loader.c:1097
 #, c-format
 msgid "loader has already been run.  Starting shell."
 msgstr "已經執行載入程式，啟動 shell 中。"
 
-#: ../loader2/loader.c:1448
+#: ../loader2/loader.c:1457
 #, c-format
 msgid "Running anaconda, the %s rescue mode - please wait...\n"
 msgstr "執行 anaconda，%s 系統的緊急救援模式 - 請稍候...\n"
 
-#: ../loader2/loader.c:1450
+#: ../loader2/loader.c:1459
 #, c-format
 msgid "Running anaconda, the %s system installer - please wait...\n"
 msgstr "執行 anaconda，%s 系統安裝程式 - 請稍候...\n"
@@ -6741,7 +6778,8 @@ msgstr "執行 anaconda，%s 系統安裝程式 - 請稍候...\n"
 msgid ""
 "Unable to read the disc checksum from the primary volume descriptor.  This "
 "probably means the disc was created without adding the checksum."
-msgstr "無法從主卷冊描述中讀取磁碟數值。 這也許表示在建立此磁碟時沒有加上數值資訊。"
+msgstr ""
+"無法從主卷冊描述中讀取磁碟數值。 這也許表示在建立此磁碟時沒有加上數值資訊。"
 
 #: ../loader2/mediacheck.c:264
 #, c-format
@@ -7138,7 +7176,8 @@ msgid "Atlantic Time - E Labrador"
 msgstr "大西洋標準時區 - 拉布拉多東部"
 
 #. generated from zone.tab
-msgid "Atlantic Time - Nova Scotia (most places), NB, W Labrador, E Quebec & PEI"
+msgid ""
+"Atlantic Time - Nova Scotia (most places), NB, W Labrador, E Quebec & PEI"
 msgstr ""
 "大西洋標準時區 - 諾華史高沙省 (大部分地方)、NB、拉布拉多西部、魁北克東部 & "
 "PEI"
@@ -7324,7 +7363,8 @@ msgid "Eastern Time - Ontario - most locations"
 msgstr "東部標準時間 -  安大略省 - 大部分地方"
 
 #. generated from zone.tab
-msgid "Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973"
+msgid ""
+"Eastern Time - Ontario & Quebec - places that did not observe DST 1967-1973"
 msgstr "東部標準時間 - 安大略省 & 魁北克 - 不遵照 DST 1967-1973 的地方"
 
 #. generated from zone.tab
@@ -7508,7 +7548,8 @@ msgid "Mountain Standard Time - Arizona"
 msgstr "山岳部標準時間 - 亞利桑那"
 
 #. generated from zone.tab
-msgid "Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia"
+msgid ""
+"Mountain Standard Time - Dawson Creek & Fort Saint John, British Columbia"
 msgstr "山岳部標準時間 - 道森河 & 福聖約翰、英屬哥倫比亞"
 
 #. generated from zone.tab
@@ -7740,6 +7781,15 @@ msgid "Zaporozh'ye, E Lugansk"
 msgstr "Zaporozh'ye, E Lugansk"
 
 #. generated from lang-table
+msgid "Bengali"
+msgstr ""
+
+#. generated from lang-table
+#, fuzzy
+msgid "Catalan"
+msgstr "義大利語"
+
+#. generated from lang-table
 msgid "Chinese(Simplified)"
 msgstr "簡體中文"
 
@@ -7772,6 +7822,10 @@ msgid "Estonian"
 msgstr "愛沙尼亞文"
 
 #. generated from lang-table
+msgid "Farsi"
+msgstr ""
+
+#. generated from lang-table
 msgid "Finnish"
 msgstr "芬蘭文"
 
@@ -7844,12 +7898,13 @@ msgid "Ukrainian"
 msgstr "烏克蘭語"
 
 #. generated from lang-table
+msgid "Welsh"
+msgstr ""
+
+#. generated from lang-table
 msgid "Zulu"
 msgstr "祖魯語"
 
-#~ msgid "The CDROM could not be mounted."
-#~ msgstr "這張光碟片無法被掛載"
-
 #~ msgid "Workstation Defaults"
 #~ msgstr "工作站安裝預設值"
 
@@ -9053,4 +9108,3 @@ msgstr "祖魯語"
 #~ msgstr ""
 #~ "繁體中文   zh_TW.Big5      無    無            zh_TW.Big5              "
 #~ "us              亞洲/台北"
-