NFS-Ganesha: Install scripts, config files, and resource agent scripts

Resubmitting after a gerrit bug bungled the merge of
http://review.gluster.org/9621 (was it really a gerrit bug?)

Scripts related to NFS-Ganesha are in extras/ganesha/scripts.
Config files are in extras/ganesha/config.
Resource Agent files are in extras/ganesha/ocf

Files are copied to appropriate locations.

Change-Id: I137169f4d653ee2b7d6df14d41e2babd0ae8d10c
BUG: 1188184
Signed-off-by: Kaleb S. KEITHLEY <kkeithle@redhat.com>
Reviewed-on: http://review.gluster.org/9912
Tested-by: Gluster Build System <jenkins@build.gluster.com>

12 files changed, 1355 insertions, 1 deletions

diff --git a/extras/Makefile.am b/extras/Makefile.am
index 28a6600304..e2b29f2da4 100644
--- a/extras/Makefile.am
+++ b/extras/Makefile.am
@@ -2,7 +2,7 @@ EditorModedir = $(docdir)
 EditorMode_DATA = glusterfs-mode.el glusterfs.vim
 
 SUBDIRS = init.d systemd benchmarking hook-scripts $(OCF_SUBDIR) LinuxRPM \
-          $(GEOREP_EXTRAS_SUBDIR)
+          $(GEOREP_EXTRAS_SUBDIR) ganesha
 
 confdir = $(sysconfdir)/glusterfs
 conf_DATA = glusterfs-logrotate gluster-rsyslog-7.2.conf gluster-rsyslog-5.8.conf \
diff --git a/extras/ganesha/Makefile.am b/extras/ganesha/Makefile.am
new file mode 100644
index 0000000000..9eaa401b6c
--- /dev/null
+++ b/extras/ganesha/Makefile.am
@@ -0,0 +1,2 @@
+SUBDIRS = scripts config ocf
+CLEANFILES =
diff --git a/extras/ganesha/config/Makefile.am b/extras/ganesha/config/Makefile.am
new file mode 100644
index 0000000000..c729273096
--- /dev/null
+++ b/extras/ganesha/config/Makefile.am
@@ -0,0 +1,4 @@
+EXTRA_DIST= ganesha-ha.conf.sample
+
+confdir = $(sysconfdir)/ganesha
+conf_DATA = ganesha-ha.conf.sample
diff --git a/extras/ganesha/config/ganesha-ha.conf.sample b/extras/ganesha/config/ganesha-ha.conf.sample
new file mode 100644
index 0000000000..68408e0e17
--- /dev/null
+++ b/extras/ganesha/config/ganesha-ha.conf.sample
@@ -0,0 +1,15 @@
+# Name of the HA cluster created.
+HA_NAME="ganesha-ha-360"
+# Shared volume to store NFS state.
+HA_VOL_NAME="ha-state-volname"
+# Mount point of the shared volume.
+HA_VOL_MNT="/mnt-nfs"
+# The server on which shared volume is created.
+HA_VOL_SERVER="server1"
+# The subset of nodes of the Gluster Trusted Pool
+# that forms the ganesha HA cluster. IP/Hostname
+# is specified.
+HA_CLUSTER_NODES="server1,server2,..."
+# Virtual IPs of each of the nodes specified above.
+VIP_server1="10.x.x.x"
+VIP_server2="10.x.x.x"
diff --git a/extras/ganesha/ocf/Makefile.am b/extras/ganesha/ocf/Makefile.am
new file mode 100644
index 0000000000..6aed9548a0
--- /dev/null
+++ b/extras/ganesha/ocf/Makefile.am
@@ -0,0 +1,12 @@
+EXTRA_DIST= ganesha_grace ganesha_mon ganesha_nfsd
+
+# The root of the OCF resource agent hierarchy
+# Per the OCF standard, it's always "lib",
+# not "lib64" (even on 64-bit platforms).
+ocfdir = $(prefix)/lib/ocf
+
+# The provider directory
+radir = $(ocfdir)/resource.d/heartbeat
+
+ra_SCRIPTS = ganesha_grace ganesha_mon ganesha_nfsd
+
diff --git a/extras/ganesha/ocf/ganesha_grace b/extras/ganesha/ocf/ganesha_grace
new file mode 100644
index 0000000000..45819c9a61
--- /dev/null
+++ b/extras/ganesha/ocf/ganesha_grace
@@ -0,0 +1,168 @@
+#!/bin/bash
+#
+# Copyright (c) 2014 Anand Subramanian anands@redhat.com
+# Copyright (c) 2015 Red Hat Inc.
+#                    All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like.  Any license provided herein, whether implied or
+# otherwise, applies only to this software file.  Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+#
+
+# Initialization:
+: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
+. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
+
+if [ -n "$OCF_DEBUG_LIBRARY" ]; then
+    . $OCF_DEBUG_LIBRARY
+else
+    : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
+. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
+fi
+
+ganesha_meta_data() {
+        cat <<END
+<?xml version="1.0"?>
+<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
+<resource-agent name="ganesha_grace">
+<version>1.0</version>
+
+<longdesc lang="en">
+This Linux-specific resource agent acts as a dummy
+resource agent for nfs-ganesha.
+</longdesc>
+
+<shortdesc lang="en">Manages the user-space nfs-ganesha NFS server</shortdesc>
+
+<parameters>
+</parameters>
+
+<actions>
+<action name="start"   timeout="40s" />
+<action name="stop"    timeout="40s" />
+<action name="status" depth="0"  timeout="20s" interval="5s" />
+<action name="monitor" depth="0"  timeout="20s" interval="5s" />
+<action name="meta-data"  timeout="20s" />
+</actions>
+</resource-agent>
+END
+
+return $OCF_SUCCESS
+}
+
+ganesha_grace_usage() {
+	echo "ganesha.nfsd USAGE"
+}
+
+# Make sure meta-data and usage always succeed
+case $__OCF_ACTION in
+	meta-data)	ganesha_meta_data
+			exit $OCF_SUCCESS
+			;;
+	usage|help)	ganesha_usage
+			exit $OCF_SUCCESS
+			;;
+	*)
+			;;
+esac
+
+ganesha_grace_start()
+{
+	local result=""
+	local resourcename=""
+	local deadserver=""
+	local tmpIFS=${IFS}
+
+	# logger "ganesha_grace_start()"
+	# we're here because somewhere in the cluster one or more
+	# of the ganesha.nfsds have died, triggering a floating IP
+	# address to move. Resource constraint location rules ensure
+	# that this is invoked before the floating IP is moved.
+	if [ -d /proc/$(cat /var/run/ganesha.nfsd.pid) ]; then
+		# my ganesha.nfsd is still running
+		# find out which one died?
+
+		pcs status | grep dead_ip-1 | sort > /tmp/.pcs_status
+
+		result=$(diff /var/run/ganesha/pcs_status /tmp/.pcs_status | grep '^>')
+		if [[ ${result} ]]; then
+			# logger "ganesha_grace_start(), ${result}"
+			IFS=$'\n'
+			for line in ${result}; do
+				resourcename=$(echo ${line} | cut -f 1 | cut -d ' ' -f 3)
+				deadserver=${resourcename%"-dead_ip-1"}
+
+				if [[ ${deadserver} ]]; then
+					# logger "ganesha_grace_start(), ${line}"
+					# logger "ganesha_grace_start(), dbus-send --print-reply --system --dest=org.ganesha.nfsd /org/ganesha/nfsd/admin org.ganesha.nfsd.admin.grace string:${deadserver}"
+					dbus-send --print-reply --system --dest=org.ganesha.nfsd /org/ganesha/nfsd/admin org.ganesha.nfsd.admin.grace string:${deadserver}
+					if [ $? -ne 0 ]; then
+						logger "warning: dbus-send --print-reply --system --dest=org.ganesha.nfsd /org/ganesha/nfsd/admin org.ganesha.nfsd.admin.grace string:${deadserver} failed"
+					fi
+				fi
+			done
+			IFS=${tmpIFS}
+		fi
+
+	fi
+	return $OCF_SUCCESS
+}
+
+ganesha_grace_stop()
+{
+
+	# logger "ganesha_grace_stop()"
+	return $OCF_SUCCESS
+}
+
+ganesha_grace_monitor()
+{
+	# logger "ganesha_grace_monitor()"
+	pcs status | grep dead_ip-1 | sort > /var/run/ganesha/pcs_status
+	return $OCF_SUCCESS
+}
+
+ganesha_grace_validate()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_grace_validate
+
+# logger "ganesha_grace ${OCF_RESOURCE_INSTANCE} $__OCF_ACTION"
+
+# Translate each action into the appropriate function call
+case $__OCF_ACTION in
+start)          ganesha_grace_start
+		;;
+stop)           ganesha_grace_stop
+		;;
+status|monitor) ganesha_grace_monitor
+		;;
+*)              ganesha_grace_usage
+                exit $OCF_ERR_UNIMPLEMENTED
+                ;;
+esac
+
+rc=$?
+
+# The resource agent may optionally log a debug message
+ocf_log debug "${OCF_RESOURCE_INSTANCE} $__OCF_ACTION returned $rc"
+exit $rc
+
diff --git a/extras/ganesha/ocf/ganesha_mon b/extras/ganesha/ocf/ganesha_mon
new file mode 100644
index 0000000000..c03d7ee5ec
--- /dev/null
+++ b/extras/ganesha/ocf/ganesha_mon
@@ -0,0 +1,159 @@
+#!/bin/bash
+#
+# Copyright (c) 2014 Anand Subramanian anands@redhat.com
+# Copyright (c) 2015 Red Hat Inc.
+#                    All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like.  Any license provided herein, whether implied or
+# otherwise, applies only to this software file.  Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+#
+
+# Initialization:
+: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
+. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
+
+if [ -n "$OCF_DEBUG_LIBRARY" ]; then
+    . $OCF_DEBUG_LIBRARY
+else
+    : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
+. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
+fi
+
+ganesha_meta_data() {
+        cat <<END
+<?xml version="1.0"?>
+<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
+<resource-agent name="ganesha_mon">
+<version>1.0</version>
+
+<longdesc lang="en">
+This Linux-specific resource agent acts as a dummy
+resource agent for nfs-ganesha.
+</longdesc>
+
+<shortdesc lang="en">Manages the user-space nfs-ganesha NFS server</shortdesc>
+
+<parameters>
+</parameters>
+
+<actions>
+<action name="start"   timeout="40s" />
+<action name="stop"    timeout="40s" />
+<action name="status" depth="0"  timeout="20s" interval="10s" />
+<action name="monitor" depth="0"  timeout="10s" interval="10s" />
+<action name="meta-data"  timeout="20s" />
+</actions>
+</resource-agent>
+END
+
+return $OCF_SUCCESS
+}
+
+ganesha_mon_usage() {
+	echo "ganesha.nfsd USAGE"
+}
+
+# Make sure meta-data and usage always succeed
+case $__OCF_ACTION in
+	meta-data)	ganesha_meta_data
+			exit $OCF_SUCCESS
+			;;
+	usage|help)	ganesha_usage
+			exit $OCF_SUCCESS
+			;;
+	*)
+			;;
+esac
+
+ganesha_mon_start()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_mon_stop()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_mon_monitor()
+{
+	local short_host=$(hostname -s)
+
+	if [ -d /proc/$(cat /var/run/ganesha.nfsd.pid) ]; then
+		# logger "ganesha_mon_monitor(), attrd_updater -n ganesha-active -v 1"
+		pcs resource delete ${short_host}-dead_ip-1
+		# if [ $? -ne 0 ]; then
+		# 	logger "warning: pcs resource delete ${short_host}-dead_ip-1"
+		# fi
+
+		sleep 1
+
+		attrd_updater -n ganesha-active -v 1
+		if [ $? -ne 0 ]; then
+			logger "warning: attrd_updater -n ganesha-active -v 1 failed"
+		fi
+
+	else
+		# logger "ganesha_mon_monitor(), attrd_updater --D -n ganesha-active"
+
+		pcs resource create ${short_host}-dead_ip-1 ocf:heartbeat:Dummy
+		if [ $? -ne 0 ]; then
+			logger "warning: pcs resource create ${short_host}-dead_ip-1 ocf:heartbeat:Dummy failed"
+		fi
+
+		sleep 1
+
+		attrd_updater -D -n ganesha-active
+		if [ $? -ne 0 ]; then
+			logger "warning: attrd_updater -D -n ganesha-active failed"
+		fi
+	fi
+
+	return $OCF_SUCCESS
+}
+
+ganesha_mon_validate()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_mon_validate
+
+# logger "ganesha_mon ${OCF_RESOURCE_INSTANCE} $__OCF_ACTION"
+
+# Translate each action into the appropriate function call
+case $__OCF_ACTION in
+start)          ganesha_mon_start
+		;;
+stop)           ganesha_mon_stop
+		;;
+status|monitor) ganesha_mon_monitor
+		;;
+*)              ganesha_mon_usage
+                exit $OCF_ERR_UNIMPLEMENTED
+                ;;
+esac
+
+rc=$?
+
+# The resource agent may optionally log a debug message
+ocf_log debug "${OCF_RESOURCE_INSTANCE} $__OCF_ACTION returned $rc"
+exit $rc
+
diff --git a/extras/ganesha/ocf/ganesha_nfsd b/extras/ganesha/ocf/ganesha_nfsd
new file mode 100644
index 0000000000..2c0b32c781
--- /dev/null
+++ b/extras/ganesha/ocf/ganesha_nfsd
@@ -0,0 +1,196 @@
+#!/bin/bash
+#
+# Copyright (c) 2014 Anand Subramanian anands@redhat.com
+# Copyright (c) 2015 Red Hat Inc.
+#                    All Rights Reserved.
+#
+# This program is free software; you can redistribute it and/or modify
+# it under the terms of version 2 of the GNU General Public License as
+# published by the Free Software Foundation.
+#
+# This program is distributed in the hope that it would be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+#
+# Further, this software is distributed without any warranty that it is
+# free of the rightful claim of any third person regarding infringement
+# or the like.  Any license provided herein, whether implied or
+# otherwise, applies only to this software file.  Patent licenses, if
+# any, provided herein do not apply to combinations of this program with
+# other software, or any other product whatsoever.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write the Free Software Foundation,
+# Inc., 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
+#
+#
+
+# Initialization:
+: ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
+. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
+
+if [ -n "$OCF_DEBUG_LIBRARY" ]; then
+    . $OCF_DEBUG_LIBRARY
+else
+    : ${OCF_FUNCTIONS_DIR=${OCF_ROOT}/lib/heartbeat}
+. ${OCF_FUNCTIONS_DIR}/ocf-shellfuncs
+fi
+
+ganesha_meta_data() {
+        cat <<END
+<?xml version="1.0"?>
+<!DOCTYPE resource-agent SYSTEM "ra-api-1.dtd">
+<resource-agent name="ganesha_nfsd">
+<version>1.0</version>
+
+<longdesc lang="en">
+This Linux-specific resource agent acts as a dummy
+resource agent for nfs-ganesha.
+</longdesc>
+
+<shortdesc lang="en">Manages the user-space nfs-ganesha NFS server</shortdesc>
+
+<parameters>
+<parameter name="ha_vol_name">
+<longdesc lang="en">HA State Volume Name</longdesc>
+<shortdesc lang="en">HA_State Volume Name</shortdesc>
+<content type="string" default="" />
+</parameter>
+
+<parameter name="ha_vol_mnt">
+<longdesc lang="en">HA State Volume Mount Point</longdesc>
+<shortdesc lang="en">HA_State Volume Mount Point</shortdesc>
+<content type="string" default="" />
+</parameter>
+
+<parameter name="ha_vol_server">
+<longdesc lang="en">HA State Volume Server</longdesc>
+<shortdesc lang="en">HA_State Volume Server</shortdesc>
+<content type="string" default="" />
+</parameter>
+</parameters>
+
+<actions>
+<action name="start"   timeout="40s" />
+<action name="stop"    timeout="40s" />
+<action name="status" depth="0"  timeout="20s" interval="1m" />
+<action name="monitor" depth="0"  timeout="10s" interval="1m" />
+<action name="meta-data"  timeout="20s" />
+</actions>
+</resource-agent>
+END
+
+return $OCF_SUCCESS
+}
+
+ganesha_nfsd_usage() {
+	echo "ganesha.nfsd USAGE"
+}
+
+# Make sure meta-data and usage always succeed
+case $__OCF_ACTION in
+	meta-data)	ganesha_meta_data
+			exit $OCF_SUCCESS
+			;;
+	usage|help)	ganesha_usage
+			exit $OCF_SUCCESS
+			;;
+	*)
+			;;
+esac
+
+ganesha_nfsd_start()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_nfsd_stop()
+{
+	local mounted=""
+	local mntptinuse=""
+	local instance_host=""
+	local short_host=""
+	local resource_prefix=${OCF_RESOURCE_INSTANCE:0:9}
+
+	if [ "X${resource_prefix}X" = "Xnfs_startX" ]; then
+
+		mounted=$(mount | grep $OCF_RESKEY_ha_vol_name)
+		mntptinuse=$(mount | grep -o $OCF_RESKEY_ha_vol_mnt)
+		short_host=$(hostname -s)
+		long_host=$(hostname)
+
+		if [[ ! ${mounted} ]]; then
+
+			if [ -d $OCF_RESKEY_ha_vol_mnt ]; then
+				if [[ ${mntptinuse} ]]; then
+					return $OCF_ERR_GENERIC
+				fi
+			else
+				mkdir ${mntpt}
+			fi
+
+			mount -t glusterfs $OCF_RESKEY_ha_vol_server:$OCF_RESKEY_ha_vol_name $OCF_RESKEY_ha_vol_mnt
+			if [ $? -ne 0 ]; then
+				logger "warning: mount -t glusterfs $OCF_RESKEY_ha_vol_server:$OCF_RESKEY_ha_vol_name $OCF_RESKEY_ha_vol_mnt failed"
+			fi
+
+			mv /var/lib/nfs /var/lib/nfs.backup
+			ln -s $OCF_RESKEY_ha_vol_mnt/${long_host}/nfs /var/lib/nfs
+			if [ $? -ne 0 ]; then
+				logger "warning: ln -s $OCF_RESKEY_ha_vol_mnt/${long_host}/nfs /var/lib/nfs failed"
+			fi
+
+		fi
+
+		service nfs-ganesha start
+		if [ $? -ne 0 ]; then
+			logger "warning: service nfs-ganesha start failed"
+		fi
+	else
+		umount $OCF_RESKEY_ha_vol_mnt
+		if [ $? -ne 0 ]; then
+			logger "warning: umount $OCF_RESKEY_ha_vol_mnt failed"
+		fi
+
+		service nfs-ganesha stop
+		if [ $? -ne 0 ]; then
+			logger "warning: service nfs-ganesha stop failed"
+		fi
+	fi
+
+	return $OCF_SUCCESS
+}
+
+ganesha_nfsd_monitor()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_nfsd_validate()
+{
+	return $OCF_SUCCESS
+}
+
+ganesha_nfsd_validate
+
+# logger "ganesha_nfsd ${OCF_RESOURCE_INSTANCE} $__OCF_ACTION"
+
+# Translate each action into the appropriate function call
+case $__OCF_ACTION in
+start)          ganesha_nfsd_start
+		;;
+stop)           ganesha_nfsd_stop
+		;;
+status|monitor) ganesha_nfsd_monitor
+		;;
+*)              ganesha_nfsd_usage
+                exit $OCF_ERR_UNIMPLEMENTED
+                ;;
+esac
+
+rc=$?
+
+# The resource agent may optionally log a debug message
+ocf_log debug "${OCF_RESOURCE_INSTANCE} $__OCF_ACTION returned $rc"
+exit $rc
+
diff --git a/extras/ganesha/scripts/Makefile.am b/extras/ganesha/scripts/Makefile.am
new file mode 100644
index 0000000000..f18ad66494
--- /dev/null
+++ b/extras/ganesha/scripts/Makefile.am
@@ -0,0 +1,4 @@
+EXTRA_DIST= ganesha-ha.sh dbus-send.sh create-export-ganesha.sh
+
+scriptsdir = $(libexecdir)/ganesha
+scripts_DATA = create-export-ganesha.sh dbus-send.sh ganesha-ha.sh
diff --git a/extras/ganesha/scripts/create-export-ganesha.sh b/extras/ganesha/scripts/create-export-ganesha.sh
new file mode 100755
index 0000000000..8140a11f54
--- /dev/null
+++ b/extras/ganesha/scripts/create-export-ganesha.sh
@@ -0,0 +1,55 @@
+#/bin/bash
+
+#This script is called by glusterd when the user
+#tries to export a volume via NFS-Ganesha.
+#An export file specific to a volume
+#is created in GANESHA_DIR/exports.
+
+GANESHA_DIR=$1
+VOL=$2
+
+function check_cmd_status()
+{
+        if [ "$1" != "0" ]
+                 then
+                 rm -rf $GANESHA_DIR/exports/export.$VOL.conf
+                 exit 1
+        fi
+}
+
+
+if [ ! -d "$GANESHA_DIR/exports" ];
+        then
+        mkdir $GANESHA_DIR/exports
+        check_cmd_status `echo $?`
+fi
+
+CONF=$(cat /etc/sysconfig/ganesha | grep "CONFFILE" | cut -f 2 -d "=")
+check_cmd_status `echo $?`
+
+
+function write_conf()
+{
+echo -e "# WARNING : Using Gluster CLI will overwrite manual
+# changes made to this file. To avoid it, edit the
+# file, copy it over to all the NFS-Ganesha nodes
+# and run ganesha-ha.sh --refresh-config."
+
+echo "EXPORT{"
+echo "      Export_Id = 1;"
+echo "      FSAL {"
+echo "           name = "GLUSTER";"
+echo "           hostname=\"localhost\";"
+echo  "          volume=\"$VOL\";"
+echo "           }"
+echo "      Access_type = RW;"
+echo '      Squash="No_root_squash";'
+echo "      Pseudo=\"/$VOL\";"
+echo '      Protocols = "3,4" ;'
+echo '      Transports = "UDP,TCP";'
+echo '      SecType = "sys";'
+echo "     }"
+}
+
+write_conf $@ > $GANESHA_DIR/exports/export.$VOL.conf
+echo "%include \"$GANESHA_DIR/exports/export.$VOL.conf\"" >> $CONF
diff --git a/extras/ganesha/scripts/dbus-send.sh b/extras/ganesha/scripts/dbus-send.sh
new file mode 100755
index 0000000000..406162f074
--- /dev/null
+++ b/extras/ganesha/scripts/dbus-send.sh
@@ -0,0 +1,74 @@
+#/bin/bash
+
+declare -i EXPORT_ID
+GANESHA_DIR=$1
+OPTION=$1
+VOL=$2
+
+function check_cmd_status()
+{
+        if [ "$1" != "0" ]
+                 then
+                 rm -rf $GANESHA_DIR/exports/export.$VOL.conf
+                 exit 1
+        fi
+}
+
+#This function keeps track of export IDs and increments it with every new entry
+function dynamic_export_add()
+{
+        count=`ls -l $GANESHA_DIR/exports/*.conf | wc -l`
+        if [ "$count" = "1" ] ;
+                then
+                EXPORT_ID=2
+        else
+        #if [ -s /var/lib/ganesha/export_removed ];
+        #               then
+        #               EXPORT_ID=`head -1 /var/lib/ganesha/export_removed`
+        #               sed -i -e "1d" /var/lib/ganesha/export_removed
+        #               else
+
+                 EXPORT_ID=`cat $GANESHA_DIR/.export_added`
+                 check_cmd_status `echo $?`
+                 EXPORT_ID=EXPORT_ID+1
+        #fi
+        fi
+        echo $EXPORT_ID > $GANESHA_DIR/.export_added
+        check_cmd_status `echo $?`
+        sed -i s/Export_Id.*/"Export_Id= $EXPORT_ID ;"/ \
+$GANESHA_DIR/exports/export.$VOL.conf
+        check_cmd_status `echo $?`
+        dbus-send --print-reply --system \
+--dest=org.ganesha.nfsd  /org/ganesha/nfsd/ExportMgr \
+org.ganesha.nfsd.exportmgr.AddExport  string:$GANESHA_DIR/exports/export.$VOL.conf \
+string:"EXPORT(Path=/$VOL)"
+
+}
+
+#This function removes an export dynamically(uses the export_id of the export)
+function dynamic_export_remove()
+{
+        removed_id=`cat $GANESHA_DIR/exports/export.$VOL.conf |\
+grep Export_Id | cut -d " " -f3`
+        echo $removed_id
+        check_cmd_status `echo $?`
+        dbus-send --print-reply --system \
+--dest=org.ganesha.nfsd /org/ganesha/nfsd/ExportMgr \
+org.ganesha.nfsd.exportmgr.RemoveExport uint16:$removed_id
+        check_cmd_status `echo $?`
+        rm -rf $GANESHA_DIR/exports/export.$VOL.conf
+
+}
+
+if [ "$OPTION" = "on" ];
+then
+        dynamic_export_add $@
+        check_cmd_status `echo $?`
+fi
+
+if [ "$OPTION" = "off" ];
+then
+        dynamic_export_remove $@
+        check_cmd_status `echo $?`
+fi
+
diff --git a/extras/ganesha/scripts/ganesha-ha.sh b/extras/ganesha/scripts/ganesha-ha.sh
new file mode 100755
index 0000000000..8fea7ff6df
--- /dev/null
+++ b/extras/ganesha/scripts/ganesha-ha.sh
@@ -0,0 +1,665 @@
+#!/bin/bash
+
+# Pacemaker+Corosync High Availability for NFS-Ganesha
+#
+# setup, teardown, add-node, delete-node, refresh-config, and status
+#
+# Each participating node in the cluster is assigned a virtual IP (VIP)
+# which fails over to another node when its associated ganesha.nfsd dies
+# for any reason. After the VIP is moved to another node all the
+# ganesha.nfsds are send a signal using DBUS to put them into NFS GRACE.
+#
+# There are six resource agent types used: ganesha_mon, ganesha_grace,
+# ganesha_nfsd, IPaddr, and Dummy. ganesha_mon is used to monitor the
+# ganesha.nfsd. ganesha_grace is used to send the DBUS signal to put
+# the remaining ganesha.nfsds into grace. ganesha_nfsd is used to start
+# and stop the ganesha.nfsd during setup and teardown. IPaddr manages
+# the VIP. A Dummy resource named $hostname-trigger_ip-1 is used to
+# ensure that the NFS GRACE DBUS signal is sent after the VIP moves to
+# the new host.
+
+HA_NUM_SERVERS=0
+HA_SERVERS=""
+HA_CONFDIR=""
+
+RHEL6_PCS_CNAME_OPTION="--name"
+
+check_cluster_exists()
+{
+    local name=${1}
+    local cluster_name=""
+
+    if [ -e /var/run/corosync.pid ]; then
+        cluster_name=$(pcs status | grep "Cluster name:" | cut -d ' ' -f 3)
+        if [ ${cluster_name} -a ${cluster_name} = ${name} ]; then
+            logger "$name already exists, exiting"
+            exit 0
+        fi
+    fi
+}
+
+determine_servers()
+{
+    local cmd=${1}
+    local num_servers=0
+    local tmp_ifs=${IFS}
+    local ha_servers=""
+
+    if [[ "X${cmd}X" != "XteardownX" ]]; then
+        IFS=$','
+        for server in ${HA_CLUSTER_NODES} ; do
+            num_servers=$(expr ${num_servers} + 1)
+        done
+        IFS=${tmp_ifs}
+        HA_NUM_SERVERS=${num_servers}
+        HA_SERVERS="${HA_CLUSTER_NODES//,/ }"
+    else
+        ha_servers=$(pcs status | grep "Online:" | grep -o '\[.*\]' | sed -e 's/\[//' | sed -e 's/\]//')
+        IFS=$' '
+        for server in ${ha_servers} ; do
+            num_servers=$(expr ${num_servers} + 1)
+        done
+        IFS=${tmp_ifs}
+        HA_NUM_SERVERS=${num_servers}
+        HA_SERVERS="${ha_servers}"
+    fi
+}
+
+setup_cluster()
+{
+    local name=${1}
+    local num_servers=${2}
+    local servers=${3}
+    local unclean=""
+
+    logger "setting up cluster ${name} with the following ${servers}"
+
+    pcs cluster auth ${servers}
+# fedora    pcs cluster setup ${name} ${servers}
+# rhel6     pcs cluster setup --name ${name} ${servers}
+    pcs cluster setup ${RHEL6_PCS_CNAME_OPTION} ${name} ${servers}
+    if [ $? -ne 0 ]; then
+        logger "pcs cluster setup ${RHEL6_PCS_CNAME_OPTION} ${name} ${servers} failed"
+        exit 1;
+    fi
+    pcs cluster start --all
+    if [ $? -ne 0 ]; then
+        logger "pcs cluster start failed"
+        exit 1;
+    fi
+
+    sleep 3
+    unclean=$(pcs status | grep -u "UNCLEAN")
+    while [[ "${unclean}X" = "UNCLEANX" ]]; do
+         sleep 1
+         unclean=$(pcs status | grep -u "UNCLEAN")
+    done
+    sleep 1
+
+    if [ ${num_servers} -lt 3 ]; then
+        pcs property set no-quorum-policy=ignore
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs property set no-quorum-policy=ignore failed"
+        fi
+    fi
+    pcs property set stonith-enabled=false
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs property set stonith-enabled=false failed"
+    fi
+}
+
+setup_finalize()
+{
+    local cibfile=${1}
+    local stopped=""
+
+    stopped=$(pcs status | grep -u "Stopped")
+    while [[ "${stopped}X" = "StoppedX" ]]; do
+         sleep 1
+         stopped=$(pcs status | grep -u "Stopped")
+    done
+
+    pcs status | grep dead_ip-1 | sort > /var/run/ganesha/pcs_status
+
+}
+
+teardown_cluster()
+{
+    local name=${1}
+
+    logger "tearing down cluster $name"
+
+    for server in ${HA_SERVERS} ; do
+        if [[ ${HA_CLUSTER_NODES} != *${server}* ]]; then
+            logger "info: ${server} is not in config, removing"
+
+            pcs cluster stop ${server}
+            if [ $? -ne 0 ]; then
+                logger "pcs cluster stop ${server}"
+            fi
+
+            pcs cluster node remove ${server}
+            if [ $? -ne 0 ]; then
+                logger "warning: pcs cluster node remove ${server} failed"
+            fi
+        fi
+    done
+
+# BZ 1193433 - pcs doesn't reload cluster.conf after modification
+# after teardown completes, a subsequent setup will appear to have
+# 'remembered' the deleted node. You can work around this by
+# issuing another `pcs cluster node remove $node`,
+# `crm_node -f -R $server`, or
+# `cibadmin --delete --xml-text '<node id="$server"
+# uname="$server"/>'
+
+    pcs cluster stop --all
+    if [ $? -ne 0 ]; then
+        logger "warning pcs cluster stop --all failed"
+    fi
+
+    pcs cluster destroy
+    if [ $? -ne 0 ]; then
+        logger "error pcs cluster destroy failed"
+        exit 1
+    fi
+}
+
+do_create_virt_ip_constraints()
+{
+    local cibfile=${1}; shift
+    local primary=${1}; shift
+    local weight="1000"
+
+    # first a constraint location rule that says the VIP must be where
+    # there's a ganesha.nfsd running
+    pcs -f ${cibfile} constraint location ${primary}-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs constraint location ${primary}-cluster_ip-1 rule score=-INFINITY ganesha-active ne 1 failed"
+    fi
+
+    # then a set of constraint location prefers to set the prefered order
+    # for where a VIP should move
+    while [[ ${1} ]]; do
+        pcs -f ${cibfile} constraint location ${primary}-cluster_ip-1 prefers ${1}=${weight}
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint location ${primary}-cluster_ip-1 prefers ${1}=${weight} failed"
+        fi
+        weight=$(expr ${weight} + 1000)
+        shift
+    done
+    # and finally set the highest preference for the VIP to its home node
+    # default weight when created is/was 100.
+    # on Fedora setting appears to be additive, so to get the desired
+    # value we adjust the weight
+    # weight=$(expr ${weight} - 100)
+    pcs -f ${cibfile} constraint location ${primary}-cluster_ip-1 prefers ${primary}=${weight}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs constraint location ${primary}-cluster_ip-1 prefers ${primary}=${weight} failed"
+    fi
+}
+
+wrap_create_virt_ip_constraints()
+{
+    local cibfile=${1}; shift
+    local primary=${1}; shift
+    local head=""
+    local tail=""
+
+    # build a list of peers, e.g. for a four node cluster, for node1,
+    # the result is "node2 node3 node4"; for node2, "node3 node4 node1"
+    # and so on.
+    while [[ ${1} ]]; do
+        if [ "${1}" = "${primary}" ]; then
+            shift
+            while [[ ${1} ]]; do
+                tail=${tail}" "${1}
+                shift
+            done
+        else
+            head=${head}" "${1}
+        fi
+        shift
+    done
+    do_create_virt_ip_constraints ${cibfile} ${primary} ${tail} ${head}
+}
+
+create_virt_ip_constraints()
+{
+    local cibfile=${1}; shift
+    while [[ ${1} ]]; do
+        wrap_create_virt_ip_constraints ${cibfile} ${1} ${HA_SERVERS}
+        shift
+    done
+}
+
+
+setup_create_resources()
+{
+    local cibfile=$(mktemp -u)
+
+    # mount the HA-state volume and start ganesha.nfsd on all nodes
+    pcs resource create nfs_start ganesha_nfsd ha_vol_name=${HA_VOL_NAME} ha_vol_mnt=${HA_VOL_MNT} ha_vol_server=${HA_VOL_SERVER} --clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource create nfs_start ganesha_nfsd --clone failed"
+    fi
+    sleep 1
+    # cloned resources seem to never have their start() invoked when they
+    # are created, but stop() is invoked when they are destroyed. Why???.
+    # No matter, we don't want this resource agent hanging around anyway
+    pcs resource delete nfs_start-clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource delete nfs_start-clone failed"
+    fi
+
+    pcs resource create nfs-mon ganesha_mon --clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource create nfs-mon ganesha_mon --clone failed"
+    fi
+
+    pcs resource create nfs-grace ganesha_grace --clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource create nfs-grace ganesha_grace --clone failed"
+    fi
+
+    pcs cluster cib ${cibfile}
+
+    while [[ ${1} ]]; do
+
+        # ipaddr=$(grep ^${1} ${HA_CONFIG_FILE} | cut -d = -f 2)
+        ipaddrx="VIP_${1//-/_}"
+
+        ipaddr=${!ipaddrx}
+
+        pcs -f ${cibfile} resource create ${1}-cluster_ip-1 ocf:heartbeat:IPaddr ip=${ipaddr} cidr_netmask=32 op monitor interval=15s
+        if [ $? -ne 0 ]; then
+            logger "warning pcs resource create ${1}-cluster_ip-1 ocf:heartbeat:IPaddr ip=${ipaddr} cidr_netmask=32 op monitor interval=10s failed"
+        fi
+
+        pcs -f ${cibfile} resource create ${1}-trigger_ip-1 ocf:heartbeat:Dummy
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs resource create ${1}-trigger_ip-1 ocf:heartbeat:Dummy failed"
+        fi
+
+        pcs -f ${cibfile} constraint colocation add ${1}-cluster_ip-1 with ${1}-trigger_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint colocation add ${1}-cluster_ip-1 with ${1}-trigger_ip-1 failed"
+        fi
+
+        pcs -f ${cibfile} constraint order ${1}-trigger_ip-1 then nfs-grace-clone
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint order ${1}-trigger_ip-1 then nfs-grace-clone failed"
+        fi
+
+        pcs -f ${cibfile} constraint order nfs-grace-clone then ${1}-cluster_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint order nfs-grace-clone then ${1}-cluster_ip-1 failed"
+        fi
+
+        shift
+    done
+
+    create_virt_ip_constraints ${cibfile} ${HA_SERVERS}
+
+    pcs cluster cib-push ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning pcs cluster cib-push ${cibfile} failed"
+    fi
+    rm -f ${cibfile}
+}
+
+teardown_resources()
+{
+    # local mntpt=$(grep ha-vol-mnt ${HA_CONFIG_FILE} | cut -d = -f 2)
+
+    # unmount the HA-state volume and terminate ganesha.nfsd on all nodes
+    pcs resource create nfs_stop ganesha_nfsd ha_vol_name=dummy ha_vol_mnt=${HA_VOL_MNT} ha_vol_server=dummy --clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource create nfs_stop ganesha_nfsd --clone failed"
+    fi
+    sleep 1
+    # cloned resources seem to never have their start() invoked when they
+    # are created, but stop() is invoked when they are destroyed. Why???.
+    pcs resource delete nfs_stop-clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource delete nfs_stop-clone failed"
+    fi
+
+    while [[ ${1} ]]; do
+        pcs resource delete ${1}-cluster_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs resource delete ${1}-cluster_ip-1 failed"
+        fi
+        pcs resource delete ${1}-trigger_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs resource delete ${1}-trigger_ip-1 failed"
+        fi
+        pcs resource delete ${1}-dead_ip-1
+        if [ $? -ne 0 ]; then
+            logger "info: pcs resource delete ${1}-dead_ip-1 failed"
+        fi
+        shift
+    done
+
+    # delete -clone resource agents
+    pcs resource delete nfs-mon-clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource delete nfs-mon-clone failed"
+    fi
+
+    pcs resource delete nfs-grace-clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource delete nfs-grace-clone failed"
+    fi
+
+}
+
+
+recreate_resources()
+{
+    local cibfile=${1}; shift
+    local add_node=${1}; shift
+    local add_vip=${1}; shift
+
+    while [[ ${1} ]]; do
+
+        # ipaddr=$(grep ^${1} ${HA_CONFIG_FILE} | cut -d = -f 2)
+        ipaddrx="VIP_${1//-/_}"
+
+        ipaddr=${!ipaddrx}
+
+        pcs -f ${cibfile} resource create ${1}-cluster_ip-1 ocf:heartbeat:IPaddr ip=${ipaddr} cidr_netmask=32 op monitor interval=15s
+        if [ $? -ne 0 ]; then
+            logger "warning pcs resource create ${1}-cluster_ip-1 ocf:heartbeat:IPaddr ip=${ipaddr} cidr_netmask=32 op monitor interval=10s failed"
+        fi
+
+        pcs -f ${cibfile} resource create ${1}-trigger_ip-1 ocf:heartbeat:Dummy
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs resource create ${1}-trigger_ip-1 ocf:heartbeat:Dummy failed"
+        fi
+
+        pcs -f ${cibfile} constraint colocation add ${1}-cluster_ip-1 with ${1}-trigger_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint colocation add ${1}-cluster_ip-1 with ${1}-trigger_ip-1 failed"
+        fi
+
+        pcs -f ${cibfile} constraint order ${1}-trigger_ip-1 then nfs-grace-clone
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint order ${1}-trigger_ip-1 then nfs-grace-clone failed"
+        fi
+
+        pcs -f ${cibfile} constraint order nfs-grace-clone then ${1}-cluster_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs constraint order nfs-grace-clone then ${1}-cluster_ip-1 failed"
+        fi
+
+        shift
+    done
+
+    pcs -f ${cibfile} resource create ${add_node}-cluster_ip-1 ocf:heartbeat:IPaddr ip=${add_vip} cidr_netmask=32 op monitor interval=15s
+    if [ $? -ne 0 ]; then
+        logger "warning pcs resource create ${add_node}-cluster_ip-1 ocf:heartbeat:IPaddr ip=${add_vip} cidr_netmask=32 op monitor interval=10s failed"
+    fi
+
+    pcs -f ${cibfile} resource create ${add_node}-trigger_ip-1 ocf:heartbeat:Dummy
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource create ${add_node}-trigger_ip-1 ocf:heartbeat:Dummy failed"
+    fi
+
+    pcs -f ${cibfile} constraint colocation add ${add_node}-cluster_ip-1 with ${add_node}-trigger_ip-1
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs constraint colocation add ${add_node}-cluster_ip-1 with ${add_node}-trigger_ip-1 failed"
+    fi
+
+    pcs -f ${cibfile} constraint order ${add_node}-trigger_ip-1 then nfs-grace-clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs constraint order ${add_node}-trigger_ip-1 then nfs-grace-clone failed"
+    fi
+
+    pcs -f ${cibfile} constraint order nfs-grace-clone then ${add_node}-cluster_ip-1
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs constraint order nfs-grace-clone then ${add_node}-cluster_ip-1 failed"
+    fi
+
+}
+
+
+clear_and_recreate_resources()
+{
+    local cibfile=${1}; shift
+    local add_node=${1}; shift
+    local add_vip=${1}; shift
+
+    while [[ ${1} ]]; do
+
+        pcs -f ${cibfile} resource delete ${1}-cluster_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs -f ${cibfile} resource delete ${1}-cluster_ip-1"
+        fi
+
+        pcs -f ${cibfile} resource delete ${1}-trigger_ip-1
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs -f ${cibfile} resource delete ${1}-trigger_ip-1"
+        fi
+
+        shift
+    done
+
+    recreate_resources ${cibfile} ${add_node} ${add_vip} ${HA_SERVERS}
+
+}
+
+
+addnode_create_resources()
+{
+    local add_node=${1}; shift
+    local add_vip=${1}; shift
+    local cibfile=$(mktemp -u)
+
+    # mount the HA-state volume and start ganesha.nfsd on the new node
+    pcs cluster cib ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs cluster cib ${cibfile} failed"
+    fi
+
+    pcs -f ${cibfile} resource create nfs_start-${add_node} ganesha_nfsd ha_vol_name=${HA_VOL_NAME} ha_vol_mnt=${HA_VOL_MNT} ha_vol_server=${HA_VOL_SERVER}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs -f ${cibfile} resource create nfs_start-${add_node} ganesha_nfsd ha_vol_name=${HA_VOL_NAME} ha_vol_mnt=${HA_VOL_MNT} ha_vol_server=${HA_VOL_SERVER} failed"
+    fi
+
+    pcs -f ${cibfile} constraint location nfs_start-${add_node} prefers ${newnode}=INFINITY
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs -f ${cibfile} constraint location nfs_start-${add_node} prefers ${newnode}=INFINITY failed"
+    fi
+
+    pcs -f ${cibfile} constraint order nfs_start-${add_node} then nfs-mon-clone
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs -f ${cibfile} constraint order nfs_start-${add_node} then nfs-mon-clone failed"
+    fi
+
+    pcs cluster cib-push ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs cluster cib-push ${cibfile} failed"
+    fi
+
+    rm -f ${cibfile}
+
+    # start HA on the new node
+    pcs cluster start ${add_node}
+    if [ $? -ne 0 ]; then
+       logger "warning: pcs cluster start ${add_node} failed"
+    fi
+
+    pcs resource delete nfs_start-${add_node}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs resource delete nfs_start-${add_node} failed"
+    fi
+
+
+    pcs cluster cib ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs cluster cib ${cibfile} failed"
+    fi
+
+    # delete all the -cluster_ip-1 and -trigger_ip-1 resources,
+    # clearing their constraints, then create them again so we can
+    # rejigger their constraints
+    clear_and_recreate_resources ${cibfile} ${add_node} ${add_vip} ${HA_SERVERS}
+
+    HA_SERVERS="${HA_SERVERS} ${add_node}"
+
+    create_virt_ip_constraints ${cibfile} ${HA_SERVERS}
+
+    pcs cluster cib-push ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs cluster cib-push ${cibfile} failed"
+    fi
+}
+
+
+deletenode_delete_resources()
+{
+    local node=${1}; shift
+
+    pcs cluster cib ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs cluster cib ${cibfile} failed"
+    fi
+
+    pcs cluster cib-push ${cibfile}
+    if [ $? -ne 0 ]; then
+        logger "warning: pcs cluster cib-push ${cibfile} failed"
+    fi
+}
+
+setup_state_volume()
+{
+    local mnt=$(mktemp -d)
+    local longname=""
+    local shortname=""
+    local dname=""
+
+    mount -t glusterfs ${HA_VOL_SERVER}:/${HA_VOL_NAME} ${mnt}
+
+    longname=$(hostname)
+    dname=${longname#$(hostname -s)}
+
+    while [[ ${1} ]]; do
+        mkdir ${mnt}/${1}${dname}
+        mkdir ${mnt}/${1}${dname}/nfs
+        mkdir ${mnt}/${1}${dname}/nfs/ganesha
+        mkdir ${mnt}/${1}${dname}/nfs/statd
+        touch ${mnt}/${1}${dname}/nfs/state
+        mkdir ${mnt}/${1}${dname}/nfs/ganesha/v4recov
+        mkdir ${mnt}/${1}${dname}/nfs/ganesha/v4old
+        mkdir ${mnt}/${1}${dname}/nfs/statd/sm
+        mkdir ${mnt}/${1}${dname}/nfs/statd/sm.bak
+        mkdir ${mnt}/${1}${dname}/nfs/statd/state
+        for server in ${HA_SERVERS} ; do
+            if [ ${server} != ${1}${dname} ]; then
+                ln -s ${mnt}/${server}/nfs/ganesha ${mnt}/${1}${dname}/nfs/ganesha/${server}
+                ln -s ${mnt}/${server}/nfs/statd ${mnt}/${1}${dname}/nfs/statd/${server}
+            fi
+        done
+        shift
+    done
+
+    umount ${mnt}
+    rmdir ${mnt}
+}
+
+main()
+{
+    local cmd=${1}; shift
+    HA_CONFDIR=${1}; shift
+    local node=""
+    local vip=""
+
+    . ${HA_CONFDIR}/ganesha-ha.conf
+
+    if [ -e /etc/os-release ]; then
+        RHEL6_PCS_CNAME_OPTION=""
+    fi
+
+    case "${cmd}" in
+
+    setup | --setup)
+        logger "setting up ${HA_NAME}"
+
+        check_cluster_exists ${HA_NAME}
+
+        determine_servers "setup"
+
+        if [ "X${HA_NUM_SERVERS}X" != "X1X" ]; then
+
+            # setup_state_volume ${HA_SERVERS}
+
+            setup_cluster ${HA_NAME} ${HA_NUM_SERVERS} "${HA_SERVERS}"
+
+            setup_create_resources ${HA_SERVERS}
+
+            setup_finalize
+        else
+
+            logger "insufficient servers for HA, aborting"
+        fi
+        ;;
+
+    teardown | --teardown)
+        logger "tearing down ${HA_NAME}"
+
+        determine_servers "teardown"
+
+        teardown_resources ${HA_SERVERS}
+
+        teardown_cluster ${HA_NAME}
+        ;;
+
+    add | --add)
+        node=${1}; shift
+        vip=${1}; shift
+
+        logger "adding ${node} with ${vip} to ${HA_NAME}"
+
+        determine_servers "add"
+
+        pcs cluster node add ${node}
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs cluster node add ${node} failed"
+        fi
+
+        addnode_create_resources ${node} ${vip}
+
+        ;;
+
+    delete | --delete)
+        node=${1}; shift
+
+        logger "deleting ${node} from ${HA_NAME}"
+
+        determine_servers "delete"
+
+        deletenode_delete_resources ${node}
+
+        pcs cluster node remove ${node}
+        if [ $? -ne 0 ]; then
+            logger "warning: pcs cluster node remove ${node} failed"
+        fi
+
+        ;;
+
+    status | --status)
+        ;;
+
+    refresh-config | --refresh-config)
+        ;;
+
+    *)
+        logger "Usage: ganesha-ha.sh setup|teardown|add|delete|status"
+        ;;
+
+    esac
+}
+
+main $*
+