pmic: add stpmu1 support

This driver implements register read/write operations for STPMU1.

The STPMU1 PMIC provides 4 BUCKs, 6 LDOs, 1 VREF
and 2 power switches. It is accessed via an I2C interface.
This device is used with STM32MP1 SoCs.

Signed-off-by: Patrick Delaunay <patrick.delaunay@st.com>

1 files changed, 85 insertions, 0 deletions

diff --git a/include/power/stpmu1.h b/include/power/stpmu1.h
new file mode 100644
index 0000000000..697e245b56
--- /dev/null
+++ b/include/power/stpmu1.h
@@ -0,0 +1,85 @@
+/*
+ * Copyright (C) 2018, STMicroelectronics - All Rights Reserved
+ *
+ * SPDX-License-Identifier:	GPL-2.0+	BSD-3-Clause
+ */
+
+#ifndef __PMIC_STPMU1_H_
+#define __PMIC_STPMU1_H_
+
+#define STPMU1_MASK_RESET_BUCK		0x18
+#define STPMU1_BUCKX_CTRL_REG(buck)	(0x20 + (buck))
+#define STPMU1_VREF_CTRL_REG		0x24
+#define STPMU1_LDOX_CTRL_REG(ldo)	(0x25 + (ldo))
+#define STPMU1_USB_CTRL_REG		0x40
+#define STPMU1_NVM_USER_STATUS_REG	0xb8
+#define STPMU1_NVM_USER_CONTROL_REG	0xb9
+
+#define STPMU1_MASK_RESET_BUCK3		BIT(2)
+
+#define STPMU1_BUCK_EN			BIT(0)
+#define STPMU1_BUCK_MODE		BIT(1)
+#define STPMU1_BUCK_OUTPUT_MASK		GENMASK(7, 2)
+#define STPMU1_BUCK_OUTPUT_SHIFT	2
+#define STPMU1_BUCK2_1200000V		(24 << STPMU1_BUCK_OUTPUT_SHIFT)
+#define STPMU1_BUCK2_1350000V		(30 << STPMU1_BUCK_OUTPUT_SHIFT)
+#define STPMU1_BUCK3_1800000V		(39 << STPMU1_BUCK_OUTPUT_SHIFT)
+
+#define STPMU1_VREF_EN			BIT(0)
+
+#define STPMU1_LDO_EN			BIT(0)
+#define STPMU1_LDO12356_OUTPUT_MASK	GENMASK(6, 2)
+#define STPMU1_LDO12356_OUTPUT_SHIFT	2
+#define STPMU1_LDO3_MODE		BIT(7)
+#define STPMU1_LDO3_DDR_SEL		31
+#define STPMU1_LDO3_1800000		(9 << STPMU1_LDO12356_OUTPUT_SHIFT)
+#define STPMU1_LDO4_UV			3300000
+
+#define STPMU1_USB_BOOST_EN		BIT(0)
+#define STPMU1_USB_PWR_SW_EN		GENMASK(2, 1)
+
+#define STPMU1_NVM_USER_CONTROL_PROGRAM	BIT(0)
+#define STPMU1_NVM_USER_CONTROL_READ	BIT(1)
+
+#define STPMU1_NVM_USER_STATUS_BUSY	BIT(0)
+#define STPMU1_NVM_USER_STATUS_ERROR	BIT(1)
+
+#define STPMU1_DEFAULT_START_UP_DELAY_MS	1
+#define STPMU1_USB_BOOST_START_UP_DELAY_MS	10
+
+enum {
+	STPMU1_BUCK1,
+	STPMU1_BUCK2,
+	STPMU1_BUCK3,
+	STPMU1_BUCK4,
+	STPMU1_MAX_BUCK,
+};
+
+enum {
+	STPMU1_BUCK_MODE_HP,
+	STPMU1_BUCK_MODE_LP,
+};
+
+enum {
+	STPMU1_LDO1,
+	STPMU1_LDO2,
+	STPMU1_LDO3,
+	STPMU1_LDO4,
+	STPMU1_LDO5,
+	STPMU1_LDO6,
+	STPMU1_MAX_LDO,
+};
+
+enum {
+	STPMU1_LDO_MODE_NORMAL,
+	STPMU1_LDO_MODE_BYPASS,
+	STPMU1_LDO_MODE_SINK_SOURCE,
+};
+
+enum {
+	STPMU1_PWR_SW1,
+	STPMU1_PWR_SW2,
+	STPMU1_MAX_PWR_SW,
+};
+
+#endif