Testing connection
Restoring connection
NetworkManager is not running.
Troubleshoot…
Start Service
Enable Service
Network devices and graphs require NetworkManager.
5 minutes
Go to now
5 minutes
1 hour
6 hours
1 day
1 week
Mbps
Sending
09:07
09:08
09:09
09:10
09:11
0
4
8
12
Mbps
Receiving
09:07
09:08
09:09
09:10
09:11
0
0.400
0.800
1.20
1.60
Firewall
1 Active Zone
Interfaces
Add Bond
Add Team
Add Bridge
Add VLAN
Name
IP Address
Sending
Receiving
eth1
Inactive
tbridge
Configuring IP
virbr0
192.168.122.1/24
No carrier
Unmanaged Interfaces
Name
IP Address
Sending
Receiving
eth0
172.27.0.15/24, fec0:0:0:0:5054:ff:fe12:3456/64
virbr0-nic
Networking Logs
November 22, 2019
9:11 AM
<info> [1574413905.5284] manager: NetworkManager state is now CONNECTED_GLOBAL
NetworkManager
9:11 AM
bound to 10.111.118.225 -- renewal in 1716 seconds.
dhclient
9:11 AM
<info> [1574413905.5096] device (eth2): Activation: successful, device activated.
NetworkManager
9:11 AM
<info> [1574413905.5055] policy: set 'eth2' (eth2) as default for IPv4 routing and DNS
NetworkManager
9:11 AM
<info> [1574413905.5053] manager: NetworkManager state is now CONNECTED_SITE
NetworkManager
9:11 AM
<info> [1574413905.3480] manager: NetworkManager state is now CONNECTED_LOCAL
NetworkManager
9:11 AM
<info> [1574413905.3448] device (eth2): state change: secondaries -> activated (reason 'none', sys-iface-state: 'managed')
NetworkManager
9:11 AM
<info> [1574413905.3418] device (eth2): state change: ip-check -> secondaries (reason 'none', sys-iface-state: 'managed')
NetworkManager
9:11 AM
<info> [1574413905.3328] device (eth2): state change: ip-config -> ip-check (reason 'none', sys-iface-state: 'managed')
NetworkManager
9:11 AM
<info> [1574413905.3181] dhcp4 (eth2): state changed unknown -> bound
NetworkManager
Networking
tbridge
5 minutes
Go to now
5 minutes
1 hour
6 hours
1 day
1 week
Kbps
Sending
09:08
09:09
09:10
09:11
09:12
0
400
800
Kbps
Receiving
09:08
09:09
09:10
09:11
09:12
0
400
800
tbridge
Bridge
66:1B:86:54:0B:7A
Delete
Status
Configuring IP
Carrier
No
General
Connect automatically
IPv4
Automatic (DHCP)
IPv6
Automatic
Bridge
Configure
Ports
Sending
Receiving
eth1
virbr0
eth2
1.78 Kbps
817 bps
IP Settings
Bond Settings
Team Settings
Team Port Settings
Bridge Settings
Name
Ports
eth1
eth2
virbr0
Spanning Tree Protocol (STP)
STP Priority
STP Forward delay
STP Hello time
STP Maximum message age
Bridge Port Settings
VLAN Settings
Ethernet MTU
Ethernet MAC
Unexpected error
Connection will be lost