- miscellaneous upstream fixeslibtool-1_5_22-5

2 files changed, 414 insertions, 1 deletions

diff --git a/libtool-1.5.22-misc.patch b/libtool-1.5.22-misc.patch
new file mode 100644
index 0000000..406d29b
--- /dev/null
+++ b/libtool-1.5.22-misc.patch
@@ -0,0 +1,405 @@
+--- libtool-1.5.22/ltmain.in.rh1	2006-06-08 12:37:19.000000000 +0200
++++ libtool-1.5.22/ltmain.in	2006-06-08 13:15:59.000000000 +0200
+@@ -46,10 +46,16 @@
+ VERSION=@VERSION@
+ TIMESTAMP="@TIMESTAMP@"
+ 
+-# See if we are running on zsh, and set the options which allow our
+-# commands through without removal of \ escapes.
+-if test -n "${ZSH_VERSION+set}" ; then
++# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
++  emulate sh
++  NULLCMD=:
++  # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which
++  # is contrary to our usage.  Disable this feature.
++  alias -g '${1+"$@"}'='"$@"'
+   setopt NO_GLOB_SUBST
++else
++  case `(set -o) 2>/dev/null` in *posix*) set -o posix;; esac
+ fi
+ 
+ # Check that we have a working $echo.
+@@ -105,12 +111,14 @@
+ # These must not be set unconditionally because not all systems understand
+ # e.g. LANG=C (notably SCO).
+ # We save the old values to restore during execute mode.
+-if test "${LC_ALL+set}" = set; then
+-  save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL
+-fi
+-if test "${LANG+set}" = set; then
+-  save_LANG="$LANG"; LANG=C; export LANG
+-fi
++for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++do
++  eval "if test \"\${$lt_var+set}\" = set; then
++         save_$lt_var=\$$lt_var
++         $lt_var=C
++         export $lt_var
++       fi"
++done
+ 
+ # Make sure IFS has a sensible default
+ lt_nl='
+@@ -136,6 +144,8 @@
+ preserve_args=
+ lo2o="s/\\.lo\$/.${objext}/"
+ o2lo="s/\\.${objext}\$/.lo/"
++extracted_archives=
++extracted_serial=0
+ 
+ #####################################
+ # Shell function definitions:
+@@ -327,7 +337,17 @@
+ 	*) my_xabs=`pwd`"/$my_xlib" ;;
+       esac
+       my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'`
+-      my_xdir="$my_gentop/$my_xlib"
++      my_xlib_u=$my_xlib
++      while :; do
++        case " $extracted_archives " in
++       *" $my_xlib_u "*)
++         extracted_serial=`expr $extracted_serial + 1`
++         my_xlib_u=lt$extracted_serial-$my_xlib ;;
++       *) break ;;
++       esac
++      done
++      extracted_archives="$extracted_archives $my_xlib_u"
++      my_xdir="$my_gentop/$my_xlib_u"
+ 
+       $show "${rm}r $my_xdir"
+       $run ${rm}r "$my_xdir"
+@@ -758,6 +778,7 @@
+     *.f90) xform=f90 ;;
+     *.for) xform=for ;;
+     *.java) xform=java ;;
++    *.obj) xform=obj ;;
+     esac
+ 
+     libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"`
+@@ -1138,8 +1159,9 @@
+     for arg
+     do
+       case $arg in
+-      -all-static | -static)
+-	if test "X$arg" = "X-all-static"; then
++      -all-static | -static | -static-libtool-libs)
++    case $arg in
++    -all-static)
+ 	  if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then
+ 	    $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2
+ 	  fi
+@@ -1147,12 +1169,20 @@
+ 	    dlopen_self=$dlopen_self_static
+ 	  fi
+ 	  prefer_static_libs=yes
+-	else
++	  ;;
++    -static)
+ 	  if test -z "$pic_flag" && test -n "$link_static_flag"; then
+ 	    dlopen_self=$dlopen_self_static
+ 	  fi
+ 	  prefer_static_libs=built
+-	fi
++	  ;;
++    -static-libtool-libs)
++      if test -z "$pic_flag" && test -n "$link_static_flag"; then
++        dlopen_self=$dlopen_self_static
++      fi
++      prefer_static_libs=yes
++      ;;
++    esac
+ 	build_libtool_libs=no
+ 	build_old_libs=yes
+ 	break
+@@ -1712,7 +1742,7 @@
+ 	continue
+ 	;;
+ 
+-      -static)
++      -static | -static-libtool-libs)
+ 	# The effects of -static are defined in a previous loop.
+ 	# We used to do the same as -all-static on platforms that
+ 	# didn't have a PIC flag, but the assumption that the effects
+@@ -2490,7 +2520,9 @@
+ 
+ 	if test "$linkmode,$pass" = "prog,link"; then
+ 	  if test -n "$library_names" &&
+-	     { test "$prefer_static_libs" = no || test -z "$old_library"; }; then
++         { { test "$prefer_static_libs" = no ||
++             test "$prefer_static_libs,$installed" = "built,yes"; } ||
++           test -z "$old_library"; }; then
+ 	    # We need to hardcode the library path
+ 	    if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then
+ 	      # Make sure the rpath contains only unique directories.
+@@ -3186,7 +3218,7 @@
+ 	  # which has an extra 1 added just for fun
+ 	  #
+ 	  case $version_type in
+-	  darwin|linux|osf|windows)
++	  darwin|linux|osf|windows|none)
+ 	    current=`expr $number_major + $number_minor`
+ 	    age="$number_minor"
+ 	    revision="$number_revision"
+@@ -3410,11 +3442,11 @@
+       fi
+ 
+       # Eliminate all temporary directories.
+-      for path in $notinst_path; do
+-	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
+-	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
+-	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
+-      done
++#      for path in $notinst_path; do
++#	lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"`
++#	deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"`
++#	dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"`
++#      done
+ 
+       if test -n "$xrpath"; then
+ 	# If the user specified any rpath flags, then add them.
+@@ -3515,13 +3547,12 @@
+ 	  int main() { return 0; }
+ EOF
+ 	  $rm conftest
+-	  $LTCC $LTCFLAGS -o conftest conftest.c $deplibs
+-	  if test "$?" -eq 0 ; then
++      if $LTCC $LTCFLAGS -o conftest conftest.c $deplibs; then
+ 	    ldd_output=`ldd conftest`
+ 	    for i in $deplibs; do
+ 	      name=`expr $i : '-l\(.*\)'`
+ 	      # If $name is empty we are operating on a -L argument.
+-              if test "$name" != "" && test "$name" -ne "0"; then
++              if test "$name" != "" && test "$name" != "0"; then
+ 		if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 		  case " $predeps $postdeps " in
+ 		  *" $i "*)
+@@ -3560,9 +3591,7 @@
+ 	      # If $name is empty we are operating on a -L argument.
+               if test "$name" != "" && test "$name" != "0"; then
+ 		$rm conftest
+-		$LTCC $LTCFLAGS -o conftest conftest.c $i
+-		# Did it work?
+-		if test "$?" -eq 0 ; then
++		if $LTCC $LTCFLAGS -o conftest conftest.c $i; then
+ 		  ldd_output=`ldd conftest`
+ 		  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
+ 		    case " $predeps $postdeps " in
+@@ -3594,7 +3623,7 @@
+ 		  droppeddeps=yes
+ 		  $echo
+ 		  $echo "*** Warning!  Library $i is needed by this library but I was not able to"
+-		  $echo "***  make it link in!  You will probably need to install it or some"
++		  $echo "*** make it link in!  You will probably need to install it or some"
+ 		  $echo "*** library that it depends on before this library will be fully"
+ 		  $echo "*** functional.  Installing it before continuing would be even better."
+ 		fi
+@@ -4239,12 +4268,14 @@
+       reload_conv_objs=
+       gentop=
+       # reload_cmds runs $LD directly, so let us get rid of
+-      # -Wl from whole_archive_flag_spec
++      # -Wl from whole_archive_flag_spec and hope we can get by with
++      # turning comma into space..
+       wl=
+ 
+       if test -n "$convenience"; then
+ 	if test -n "$whole_archive_flag_spec"; then
+-	  eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\"
++	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
++      reload_conv_objs=$reload_objs\ `$echo "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+ 	else
+ 	  gentop="$output_objdir/${obj}x"
+ 	  generated="$generated $gentop"
+@@ -4692,16 +4723,16 @@
+           case $host in
+           *cygwin* | *mingw* )
+             if test -f "$output_objdir/${outputname}.def" ; then
+-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
+-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"`
++              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
++              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%" | $NL2SP`
+             else
+-              compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+-              finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++              compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
++              finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+              fi
+             ;;
+           * )
+-            compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
+-            finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"`
++            compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
++            finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%" | $NL2SP`
+             ;;
+           esac
+ 	  ;;
+@@ -4716,13 +4747,13 @@
+ 	# really was required.
+ 
+ 	# Nullify the symbol file.
+-	compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
+-	finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
++	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
++	finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "s% @SYMFILE@%%" | $NL2SP`
+       fi
+ 
+       if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
+ 	# Replace the output file specification.
+-	compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
++	compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$output"'%g' | $NL2SP`
+ 	link_command="$compile_command$compile_rpath"
+ 
+ 	# We have no uninstalled library dependencies, so finalize right now.
+@@ -4809,7 +4840,7 @@
+ 	if test "$fast_install" != no; then
+ 	  link_command="$finalize_var$compile_command$finalize_rpath"
+ 	  if test "$fast_install" = yes; then
+-	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
++	    relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $SP2NL | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g' | $NL2SP`
+ 	  else
+ 	    # fast_install is set to needless
+ 	    relink_command=
+@@ -4846,7 +4877,7 @@
+ 	  fi
+ 	done
+ 	relink_command="(cd `pwd`; $relink_command)"
+-	relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++	relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+       fi
+ 
+       # Quote $echo for shipping.
+@@ -5253,6 +5284,18 @@
+ Xsed='${SED} -e 1s/^X//'
+ sed_quote_subst='$sed_quote_subst'
+ 
++# Be Bourne compatible (taken from Autoconf:_AS_BOURNE_COMPATIBLE).
++if test -n \"\${ZSH_VERSION+set}\" && (emulate sh) >/dev/null 2>&1; then
++  emulate sh
++  NULLCMD=:
++  # Zsh 3.x and 4.x performs word splitting on \${1+\"\$@\"}, which
++  # is contrary to our usage.  Disable this feature.
++  alias -g '\${1+\"\$@\"}'='\"\$@\"'
++  setopt NO_GLOB_SUBST
++else
++  case \`(set -o) 2>/dev/null\` in *posix*) set -o posix;; esac
++fi
++
+ # The HP-UX ksh and POSIX shell print the target directory to stdout
+ # if CDPATH is set.
+ (unset CDPATH) >/dev/null 2>&1 && unset CDPATH
+@@ -5395,7 +5438,7 @@
+ 	  ;;
+ 	esac
+ 	$echo >> $output "\
+-      \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\"
++      \$echo \"\$0: cannot exec \$program \$*\"
+       exit $EXIT_FAILURE
+     fi
+   else
+@@ -5581,7 +5624,7 @@
+       done
+       # Quote the link command for shipping.
+       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
+-      relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"`
++      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e "$sed_quote_subst" | $NL2SP`
+       if test "$hardcode_automatic" = yes ; then
+ 	relink_command=
+       fi
+@@ -5926,9 +5969,9 @@
+ 
+ 	  if test -n "$inst_prefix_dir"; then
+ 	    # Stick the inst_prefix_dir data into the link command.
+-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
++	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%" | $NL2SP`
+ 	  else
+-	    relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
++	    relink_command=`$echo "$relink_command" | $SP2NL | $SED "s%@inst_prefix_dir@%%" | $NL2SP`
+ 	  fi
+ 
+ 	  $echo "$modename: warning: relinking \`$file'" 1>&2
+@@ -6137,7 +6180,7 @@
+ 	      file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'`
+ 	      outputname="$tmpdir/$file"
+ 	      # Replace the output file specification.
+-	      relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
++	      relink_command=`$echo "X$relink_command" | $SP2NL | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g' | $NL2SP`
+ 
+ 	      $show "$relink_command"
+ 	      if $run eval "$relink_command"; then :
+@@ -6413,12 +6456,15 @@
+       fi
+ 
+       # Restore saved environment variables
+-      if test "${save_LC_ALL+set}" = set; then
+-	LC_ALL="$save_LC_ALL"; export LC_ALL
+-      fi
+-      if test "${save_LANG+set}" = set; then
+-	LANG="$save_LANG"; export LANG
+-      fi
++      for lt_var in LANG LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
++      do
++       eval "if test \"\${save_$lt_var+set}\" = set; then
++               $lt_var=\$save_$lt_var; export $lt_var
++             else
++               $lt_unset $lt_var
++             fi"
++      done
++
+ 
+       # Now prepare to actually exec the command.
+       exec_cmd="\$cmd$args"
+@@ -6775,9 +6821,9 @@
+   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
+   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
+   -export-symbols SYMFILE
+-		    try to export only the symbols listed in SYMFILE
++                    try to export only the symbols listed in SYMFILE
+   -export-symbols-regex REGEX
+-		    try to export only the symbols matching REGEX
++                    try to export only the symbols matching REGEX
+   -LLIBDIR          search LIBDIR for required installed libraries
+   -lNAME            OUTPUT-FILE requires the installed library libNAME
+   -module           build a library that can dlopened
+@@ -6791,9 +6837,11 @@
+   -release RELEASE  specify package release information
+   -rpath LIBDIR     the created library will eventually be installed in LIBDIR
+   -R[ ]LIBDIR       add LIBDIR to the runtime path of programs and libraries
+-  -static           do not do any dynamic linking of libtool libraries
++  -static           do not do any dynamic linking of uninstalled libtool libraries
++  -static-libtool-libs
++                    do not do any dynamic linking of libtool libraries
+   -version-info CURRENT[:REVISION[:AGE]]
+-		    specify library version info [each variable defaults to 0]
++                    specify library version info [each variable defaults to 0]
+ 
+ All other options (arguments beginning with \`-') are ignored.
+ 
+--- libtool-1.5.22/libtool.m4.rh1	2006-06-08 12:32:23.000000000 +0200
++++ libtool-1.5.22/libtool.m4	2006-06-08 12:36:53.000000000 +0200
+@@ -6378,6 +6378,7 @@
+     done
+   done
+ done
++IFS=$as_save_IFS
+ lt_ac_max=0
+ lt_ac_count=0
+ # Add /usr/xpg4/bin/sed as it is typically found on Solaris
+@@ -6410,5 +6411,6 @@
+ done
+ ])
+ SED=$lt_cv_path_SED
++AC_SUBST([SED])
+ AC_MSG_RESULT([$SED])
+ ])
+--- libtool-1.5.22/libltdl/ltdl.c.syntax1	2006-06-08 12:02:39.000000000 +0200
++++ libtool-1.5.22/libltdl/ltdl.c	2006-06-08 12:03:09.000000000 +0200
+@@ -894,7 +894,7 @@
+ 		(*lt_dlmutex_seterror_func) (errormsg);		\
+ 	else 	lt_dllast_error = (errormsg);	} LT_STMT_END
+ #define LT_DLMUTEX_GETERROR(errormsg)		LT_STMT_START {	\
+-	if (lt_dlmutex_seterror_func)				\
++	if (lt_dlmutex_geterror_func)				\
+ 		(errormsg) = (*lt_dlmutex_geterror_func) ();	\
+ 	else	(errormsg) = lt_dllast_error;	} LT_STMT_END
+ 
diff --git a/libtool.spec b/libtool.spec
index 0c4ce11..b9b37b6 100644
--- a/libtool.spec
+++ b/libtool.spec
@@ -4,13 +4,17 @@
 Summary:	The GNU Portable Library Tool
 Name:		libtool
 Version:	%{upstream_version}
-Release:  	4
+Release:  	5
 License:	GPL
 Group:		Development/Tools
 Source:		http://ftp.gnu.org/gnu/libtool/libtool-%{upstream_version}.tar.gz
 URL:		http://www.gnu.org/software/libtool/
 BuildRoot:	%{_tmppath}/%{name}-root
 Patch1:		libtool-1.5.18-multilib.patch
+
+# Remove in libtool-1.5.23:
+Patch2:		libtool-1.5.22-misc.patch
+
 PreReq:		/sbin/install-info
 BuildRequires:	autoconf >= 2.59, automake >= 1.9.2, texinfo
 # make sure we can configure all supported langs
@@ -72,6 +76,7 @@ Static libraries and header files for development with ltdl.
 %prep
 %setup -n libtool-%{upstream_version} -q
 %patch1 -p1 -b .multilib
+%patch2 -p1
 
 %build
 
@@ -141,6 +146,9 @@ fi
 
 
 %changelog
+* Thu Jun 29 2006 Karsten Hopp <karsten@redhat.de> 1.5.22-5
+- miscellaneous upstream fixes
+
 * Tue Jun 06 2006 Karsten Hopp <karsten@redhat.de> 1.5.22-4
 - don't warn when /etc/ld.so.conf.d/*.conf doesn't exist (p.e. in mock)