From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Benjamin Marzinski Date: Thu, 16 Oct 2014 15:49:01 -0500 Subject: [PATCH] RH: add mpathconf mpathconf is a program (largely based on lvmcomf) to help users configure /etc/multipath.conf and enable or disable multipathing. It has a couple of built-in options that can be set directly from the command line. But, mostly it is used to get a multipath.conf file with the OS defaults, and to enable and disable multipathing via a single command. Signed-off-by: Benjamin Marzinski --- libmultipath/config.c | 1 + multipath/Makefile | 5 + multipath/mpathconf | 464 ++++++++++++++++++++++++++++++++++++++++++++++++++ multipath/mpathconf.8 | 101 +++++++++++ 4 files changed, 571 insertions(+) create mode 100644 multipath/mpathconf create mode 100644 multipath/mpathconf.8 diff --git a/libmultipath/config.c b/libmultipath/config.c index aae69b8..c485748 100644 --- a/libmultipath/config.c +++ b/libmultipath/config.c @@ -672,6 +672,7 @@ load_config (char * file) condlog(0, "/etc/multipath.conf does not exist, blacklisting all devices."); condlog(0, "A default multipath.conf file is located at"); condlog(0, "/usr/share/doc/device-mapper-multipath-%d.%d.%d/multipath.conf", MULTIPATH_VERSION(VERSION_CODE)); + condlog(0, "You can run /sbin/mpathconf to create or modify /etc/multipath.conf"); if (conf->blist_devnode == NULL) { conf->blist_devnode = vector_alloc(); if (!conf->blist_devnode) { diff --git a/multipath/Makefile b/multipath/Makefile index 1e9ee4b..3d4d459 100644 --- a/multipath/Makefile +++ b/multipath/Makefile @@ -18,10 +18,12 @@ $(EXEC): $(OBJS) $(CC) $(CFLAGS) $(OBJS) -o $(EXEC) $(LDFLAGS) $(LIBDEPS) $(GZIP) $(EXEC).8 > $(EXEC).8.gz $(GZIP) $(EXEC).conf.5 > $(EXEC).conf.5.gz + $(GZIP) mpathconf.8 > mpathconf.8.gz install: $(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) $(INSTALL_PROGRAM) -m 755 $(EXEC) $(DESTDIR)$(bindir)/ + $(INSTALL_PROGRAM) -m 755 mpathconf $(DESTDIR)$(bindir)/ $(INSTALL_PROGRAM) -d $(DESTDIR)$(udevrulesdir) $(INSTALL_PROGRAM) -m 644 11-dm-mpath.rules $(DESTDIR)$(udevrulesdir) $(INSTALL_PROGRAM) -m 644 $(EXEC).rules $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules @@ -29,13 +31,16 @@ install: $(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(man8dir) $(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir) $(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir) + $(INSTALL_PROGRAM) -m 644 mpathconf.8.gz $(DESTDIR)$(man8dir) uninstall: $(RM) $(DESTDIR)$(bindir)/$(EXEC) $(RM) $(DESTDIR)$(udevrulesdir)/11-dm-mpath.rules $(RM) $(DESTDIR)$(libudevdir)/rules.d/62-multipath.rules + $(RM) $(DESTDIR)$(bindir)/mpathconf $(RM) $(DESTDIR)$(man8dir)/$(EXEC).8.gz $(RM) $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz + $(RM) $(DESTDIR)$(man8dir)/mpathconf.8.gz clean: $(RM) core *.o $(EXEC) *.gz diff --git a/multipath/mpathconf b/multipath/mpathconf new file mode 100644 index 0000000..e839134 --- /dev/null +++ b/multipath/mpathconf @@ -0,0 +1,464 @@ +#!/bin/bash +# +# Copyright (C) 2010 Red Hat, Inc. All rights reserved. +# +# This file is part of the device-mapper-multipath package. +# +# This copyrighted material is made available to anyone wishing to use, +# modify, copy, or redistribute it subject to the terms and conditions +# of the GNU General Public License v.2. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software Foundation, +# Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + +# +# Simple editting of /etc/multipath.conf +# This program was largely ripped off from lvmconf +# + +unset ENABLE FIND FRIENDLY MODULE MULTIPATHD HAVE_DISABLE HAVE_WWID_DISABLE HAVE_FIND HAVE_BLACKLIST HAVE_EXCEPTIONS HAVE_DEFAULTS HAVE_FRIENDLY HAVE_MULTIPATHD HAVE_MODULE HAVE_OUTFILE SHOW_STATUS CHANGED_CONFIG WWID_LIST + +DEFAULT_CONFIG="# device-mapper-multipath configuration file + +# For a complete list of the default configuration values, run either: +# # multipath -t +# or +# # multipathd show config + +# For a list of configuration options with descriptions, see the +# multipath.conf man page. + +defaults { + user_friendly_names yes + find_multipaths yes +} + +blacklist_exceptions { + property \"(SCSI_IDENT_|ID_WWN)\" +}" + +CONFIGFILE="/etc/multipath.conf" +OUTPUTFILE="/etc/multipath.conf" +MULTIPATHDIR="/etc/multipath" +TMPFILE="/etc/multipath/.multipath.conf.tmp" +WWIDS=0 + +function usage +{ + echo "usage: $0 " + echo "" + echo "Commands:" + echo "Enable: --enable " + echo "Disable: --disable" + echo "Only allow certain wwids (instead of enable): --allow " + echo "Set user_friendly_names (Default y): --user_friendly_names " + echo "Set find_multipaths (Default y): --find_multipaths " + echo "Load the dm-multipath modules on enable (Default y): --with_module " + echo "start/stop/reload multipathd (Default n): --with_multipathd " + echo "select output file (Default /etc/multipath.conf): --outfile " + echo "" +} + +function add_wwid +{ + INDEX=0 + while [ "$INDEX" -lt "$WWIDS" ] ; do + if [ "$1" = "${WWID_LIST[$INDEX]}" ] ; then + return + fi + ((INDEX++)) + done + WWID_LIST[$WWIDS]="$1" + ((WWIDS++)) +} + +function get_dm_deps +{ + shift 3 + while [ -n "$1" -a -n "$2" ]; do + MAJOR=$(echo $1 | tr -d '(,') + MINOR=$(echo $2 | tr -d ')') + UUID=`dmsetup info -c --noheadings -o uuid -j $MAJOR -m $MINOR 2> /dev/null` + if [ -n "$UUID" ] ; then + set_dm_wwid $UUID + fi + shift 2 + done +} + +function set_dm_wwid +{ + if [[ "$1" =~ ^part[[:digit:]]+-mpath- ]] ; then + add_wwid "${1##part*-mpath-}" + elif [[ "$1" =~ ^mpath- ]] ; then + add_wwid "${1##mpath-}" + else + get_dm_deps `dmsetup deps -u $1` + fi +} + +function set_wwid +{ + UUID="" + if [[ "$1" =~ ^[[:digit:]]+:[[:digit:]]+$ ]] ; then + MAJOR=${1%%:*} + MINOR=${1##*:} + UUID=`dmsetup info -c --noheadings -o uuid -j $MAJOR -m $MINOR 2> /dev/null` + else + UUID=`dmsetup info -c --noheadings -o uuid $1 2> /dev/null` + fi + if [ -n "$UUID" ] ; then + set_dm_wwid $UUID + else + add_wwid "$1" + fi +} + +function parse_args +{ + while [ -n "$1" ]; do + case $1 in + --enable) + ENABLE=1 + shift + ;; + --disable) + ENABLE=0 + shift + ;; + --allow) + ENABLE=2 + if [ -n "$2" ]; then + set_wwid $2 + shift 2 + else + usage + exit 1 + fi + ;; + --user_friendly_names) + if [ -n "$2" ]; then + FRIENDLY=$2 + shift 2 + else + usage + exit 1 + fi + ;; + --find_multipaths) + if [ -n "$2" ]; then + FIND=$2 + shift 2 + else + usage + exit 1 + fi + ;; + --with_module) + if [ -n "$2" ]; then + MODULE=$2 + shift 2 + else + usage + exit 1 + fi + ;; + --with_multipathd) + if [ -n "$2" ]; then + MULTIPATHD=$2 + shift 2 + else + usage + exit 1 + fi + ;; + --outfile) + if [ -n "$2" ]; then + OUTPUTFILE=$2 + HAVE_OUTFILE=1 + shift 2 + else + usage + exit 1 + fi + ;; + *) + usage + exit + esac + done +} + +function validate_args +{ + if [ "$ENABLE" = "0" ] && [ -n "$FRIENDLY" -o -n "$FIND" -o -n "$MODULE" ]; then + echo "ignoring extra parameters on disable" + FRIENDLY="" + FIND="" + MODULE="" + fi + if [ -n "$FRIENDLY" ] && [ "$FRIENDLY" != "y" -a "$FRIENDLY" != "n" ]; then + echo "--user_friendly_names must be either 'y' or 'n'" + exit 1 + fi + if [ -n "$FIND" ] && [ "$FIND" != "y" -a "$FIND" != "n" ]; then + echo "--find_multipaths must be either 'y' or 'n'" + exit 1 + fi + if [ -z "$ENABLE" -a -z "$FIND" -a -z "$FRIENDLY" ]; then + SHOW_STATUS=1 + fi + if [ -n "$MODULE" ] && [ "$MODULE" != "y" -a "$MODULE" != "n" ]; then + echo "--with_module must be either 'y' or 'n'" + exit 1 + fi + if [ -n "$MULTIPATHD" ] && [ "$MULTIPATHD" != "y" -a "$MULTIPATHD" != "n" ]; then + echo "--with_multipathd must be either 'y' or 'n'" + exit 1 + fi + if [ "$ENABLE" = 2 -a -z "$HAVE_OUTFILE" ]; then + echo "Because --allow makes changes that cannot be automatically reversed," + echo "you must set --outfile when you set --allow" + exit 1 + fi +} + +function add_blacklist_exceptions +{ + INDEX=0 + while [ "$INDEX" -lt "$WWIDS" ] ; do + sed -i '/^blacklist_exceptions[[:space:]]*{/ a\ + wwid '"\"${WWID_LIST[$INDEX]}\""' +' $TMPFILE + ((INDEX++)) + done +} + +umask 0077 + +parse_args "$@" + +validate_args + +if [ ! -d "$MULTIPATHDIR" ]; then + echo "/etc/multipath/ does not exist. failing" + exit 1 +fi + +rm $TMPFILE 2> /dev/null +echo "$DEFAULT_CONFIG" > $TMPFILE +if [ -f "$CONFIGFILE" ]; then + cp $CONFIGFILE $TMPFILE +fi + +if grep -q "^blacklist[[:space:]]*{" $TMPFILE ; then + HAVE_BLACKLIST=1 +fi + +if grep -q "^blacklist_exceptions[[:space:]]*{" $TMPFILE ; then + HAVE_EXCEPTIONS=1 +fi + +if grep -q "^defaults[[:space:]]*{" $TMPFILE ; then + HAVE_DEFAULTS=1 +fi + +if [ -z "$MODULE" -o "$MODULE" = "y" ]; then + if lsmod | grep -q "dm_multipath" ; then + HAVE_MODULE=1 + else + HAVE_MODULE=0 + fi +fi + +if [ "$MULTIPATHD" = "y" ]; then + if /bin/systemctl status multipathd.service > /dev/null 2>&1 ; then + HAVE_MULTIPATHD=1 + else + HAVE_MULTIPATHD=0 + fi +fi + +if [ "$HAVE_BLACKLIST" = "1" ]; then + if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*devnode \"\.\?\*\"" ; then + HAVE_DISABLE=1 + elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"" ; then + HAVE_DISABLE=0 + fi +fi + +if [ "$HAVE_BLACKLIST" = "1" ]; then + if sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*wwid \"\.\?\*\"" ; then + HAVE_WWID_DISABLE=1 + elif sed -n '/^blacklist[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"" ; then + HAVE_WWID_DISABLE=0 + fi +fi + +if [ "$HAVE_DEFAULTS" = "1" ]; then + if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)" ; then + HAVE_FIND=1 + elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)" ; then + HAVE_FIND=0 + fi + if sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)" ; then + HAVE_FRIENDLY=1 + elif sed -n '/^defaults[[:space:]]*{/,/^}/ p' $TMPFILE | grep -q "^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)" ; then + HAVE_FRIENDLY=0 + fi +fi + +if [ -n "$SHOW_STATUS" ]; then + if [ -z "$HAVE_DISABLE" -o "$HAVE_DISABLE" = 0 ]; then + echo "multipath is enabled" + else + echo "multipath is disabled" + fi + if [ -z "$HAVE_FIND" -o "$HAVE_FIND" = 0 ]; then + echo "find_multipaths is disabled" + else + echo "find_multipaths is enabled" + fi + if [ -z "$HAVE_FRIENDLY" -o "$HAVE_FRIENDLY" = 0 ]; then + echo "user_friendly_names is disabled" + else + echo "user_friendly_names is enabled" + fi + if [ -n "$HAVE_MODULE" ]; then + if [ "$HAVE_MODULE" = 1 ]; then + echo "dm_multipath module is loaded" + else + echo "dm_multipath module is not loaded" + fi + fi + if [ -z "$HAVE_MULTIPATHD" ]; then + if /bin/systemctl status multipathd.service > /dev/null 2>&1 ; then + HAVE_MULTIPATHD=1 + else + HAVE_MULTIPATHD=0 + fi + fi + if [ "$HAVE_MULTIPATHD" = 1 ]; then + echo "multipathd is running" + else + echo "multipathd is not running" + fi + exit 0 +fi + +if [ -z "$HAVE_BLACKLIST" ]; then + cat >> $TMPFILE <<- _EOF_ + +blacklist { +} +_EOF_ +fi + +if [ -z "$HAVE_DEFAULTS" ]; then + cat >> $TMPFILE <<- _EOF_ + +defaults { +} +_EOF_ +fi + +if [ "$ENABLE" = 2 ]; then + if [ "$HAVE_DISABLE" = 1 ]; then + sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE + fi + if [ -z "$HAVE_WWID_DISABLE" ]; then + sed -i '/^blacklist[[:space:]]*{/ a\ + wwid ".*" +' $TMPFILE + elif [ "$HAVE_WWID_DISABLE" = 0 ]; then + sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*wwid \"\.\?\*\"/ wwid ".*"/' $TMPFILE + fi + if [ "$HAVE_EXCEPTIONS" = 1 ]; then + sed -i '/^blacklist_exceptions[[:space:]]*{/,/^}/ {/^[[:space:]]*wwid/ d}' $TMPFILE + else + cat >> $TMPFILE <<- _EOF_ + +blacklist_exceptions { +} +_EOF_ + fi + add_blacklist_exceptions +elif [ "$ENABLE" = 1 ]; then + if [ "$HAVE_DISABLE" = 1 ]; then + sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*devnode \"\.\?\*\"/# devnode ".*"/' $TMPFILE + fi +elif [ "$ENABLE" = 0 ]; then + if [ -z "$HAVE_DISABLE" ]; then + sed -i '/^blacklist[[:space:]]*{/ a\ + devnode ".*" +' $TMPFILE + elif [ "$HAVE_DISABLE" = 0 ]; then + sed -i '/^blacklist[[:space:]]*{/,/^}/ s/^[[:space:]]*#[[:space:]]*devnode \"\.\?\*\"/ devnode ".*"/' $TMPFILE + fi +fi + +if [ "$FIND" = "n" ]; then + if [ "$HAVE_FIND" = 1 ]; then + sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(yes\|1\)/ find_multipaths no/' $TMPFILE + CHANGED_CONFIG=1 + fi +elif [ "$FIND" = "y" ]; then + if [ -z "$HAVE_FIND" ]; then + sed -i '/^defaults[[:space:]]*{/ a\ + find_multipaths yes +' $TMPFILE + CHANGED_CONFIG=1 + elif [ "$HAVE_FIND" = 0 ]; then + sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*find_multipaths[[:space:]]*\(no\|0\)/ find_multipaths yes/' $TMPFILE + CHANGED_CONFIG=1 + fi +fi + +if [ "$FRIENDLY" = "n" ]; then + if [ "$HAVE_FRIENDLY" = 1 ]; then + sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(yes\|1\)/ user_friendly_names no/' $TMPFILE + CHANGED_CONFIG=1 + fi +elif [ "$FRIENDLY" = "y" ]; then + if [ -z "$HAVE_FRIENDLY" ]; then + sed -i '/^defaults[[:space:]]*{/ a\ + user_friendly_names yes +' $TMPFILE + CHANGED_CONFIG=1 + elif [ "$HAVE_FRIENDLY" = 0 ]; then + sed -i '/^defaults[[:space:]]*{/,/^}/ s/^[[:space:]]*user_friendly_names[[:space:]]*\(no\|0\)/ user_friendly_names yes/' $TMPFILE + CHANGED_CONFIG=1 + fi +fi + +if [ -f "$OUTPUTFILE" ]; then + cp $OUTPUTFILE $OUTPUTFILE.old + if [ $? != 0 ]; then + echo "failed to backup old config file, $OUTPUTFILE not updated" + exit 1 + fi +fi + +cp $TMPFILE $OUTPUTFILE +if [ $? != 0 ]; then + echo "failed to copy new config file into place, check $OUTPUTFILE is still OK" + exit 1 +fi + +rm -f $TMPFILE + +if [ "$ENABLE" = 1 ]; then + if [ "$HAVE_MODULE" = 0 ]; then + modprobe dm_multipath + fi + if [ "$HAVE_MULTIPATHD" = 0 ]; then + systemctl start multipathd.service + fi +elif [ "$ENABLE" = 0 ]; then + if [ "$HAVE_MULTIPATHD" = 1 ]; then + systemctl stop multipathd.service + fi +elif [ -n "$CHANGED_CONFIG" -a "$HAVE_MULTIPATHD" = 1 ]; then + systemctl reload multipathd.service +fi diff --git a/multipath/mpathconf.8 b/multipath/mpathconf.8 new file mode 100644 index 0000000..4cd3267 --- /dev/null +++ b/multipath/mpathconf.8 @@ -0,0 +1,101 @@ +.TH MPATHCONF 8 "June 2010" "" "Linux Administrator's Manual" +.SH NAME +mpathconf - A tool for configuring device-mapper-multipath +.SH SYNOPSIS +.B mpathconf +.RB [\| commands \|] +.RB [\| options \|] +.SH DESCRIPTION +.B mpathconf +is a utility that creates or modifies +.B /etc/multipath.conf. +It can enable or disable multipathing and configure some common options. +.B mpathconf +can also load the +.B dm_multipath +module, start and stop the +.B multipathd +daemon, and configure the +.B multipathd +service to start automatically or not. If +.B mpathconf +is called with no commands, it will display the current configuration. + +The default options for mpathconf are +.B --with_module +The +.B --with_multipathd +option is not set by default. Enabling multipathing will load the +.B dm_multipath +module but it will not immediately start it. This is so +that users can manually edit their config file if necessary, before starting +.B multipathd. + +If +.B /etc/multipath.conf +already exists, mpathconf will edit it. If it does not exist, mpathconf will +create a default file with +.B user_friendly_names +and +.B find_multipaths +set. To disable these, use the +.B --user_friendly_names n +and +.B --find_multipaths n +options +.SH COMMANDS +.TP +.B --enable +Removes any line that blacklists all device nodes from the +.B /etc/multipath.conf +blacklist section. +.TP +.B --disable +Adds a line that blacklists all device nodes to the +.B /etc/multipath.conf +blacklist section. If no blacklist section exists, it will create one. +.TP +.B --user_friendly_name \fP { \fBy\fP | \fBn\fP } +If set to \fBy\fP, this adds the line +.B user_friendly_names yes +to the +.B /etc/multipath.conf +defaults section. If set to \fBn\fP, this removes the line, if present. This +command can be used along with any other command. +.TP +.B --find_multipaths\fP { \fBy\fP | \fBn\fP } +If set to \fBy\fP, this adds the line +.B find_multipaths yes +to the +.B /etc/multipath.conf +defaults section. If set to \fBn\fP, this removes the line, if present. This +command can be used aldong with any other command. +.SH OPTIONS +.TP +.B --with_module\fP { \fBy\fP | \fBn\fP } +If set to \fBy\fP, this runs +.B modprobe dm_multipath +to install the multipath modules. This option only works with the +.B --enable +command. This option is set to \fBy\fP by default. +.TP +.B --with_multipathd { \fBy\fP | \fBn\fP } +If set to \fBy\fP, this runs +.B service multipathd start +to start the multipathd daemon on \fB--enable\fP, +.B service multipathd stop +to stop the multipathd daemon on \fB--disable\fP, and +.B service multipathd reload +to reconfigure multipathd on \fB--user_frindly_names\fP and +\fB--find_multipaths\fP. +This option is set to \fBn\fP by default. +.SH FILES +.BR /etc/multipath.conf +.SH "SEE ALSO" +.BR multipath.conf (5), +.BR modprobe (8), +.BR multipath (8), +.BR multipathd (8), +.BR service (8), +.SH AUTHOR +Benjamin Marzinski -- 2.7.4