diff options
Diffstat (limited to '0051-RHBZ-596156-mpathconf-man-page.patch')
| -rw-r--r-- | 0051-RHBZ-596156-mpathconf-man-page.patch | 154 |
1 files changed, 154 insertions, 0 deletions
diff --git a/0051-RHBZ-596156-mpathconf-man-page.patch b/0051-RHBZ-596156-mpathconf-man-page.patch new file mode 100644 index 0000000..a758035 --- /dev/null +++ b/0051-RHBZ-596156-mpathconf-man-page.patch @@ -0,0 +1,154 @@ +--- + multipath/Makefile | 3 + + multipath/mpathconf.8 | 116 ++++++++++++++++++++++++++++++++++++++++++++++++++ + 2 files changed, 119 insertions(+) + +Index: multipath-tools/multipath/mpathconf.8 +=================================================================== +--- /dev/null ++++ multipath-tools/multipath/mpathconf.8 +@@ -0,0 +1,116 @@ ++.TH MPATHCONF 8 "June 2010" "" "Linux Administrator's Manual" ++.SH NAME ++mpathconf - A tool for configuring device-mapper-multipath ++.SH SYNOPSIS ++.B mpathconf ++.RB [\| commands \|] ++.RB [\| options \|] ++.SH DESCRIPTION ++.B mpathconf ++is a utility that creates or modifies ++.B /etc/multipath.conf. ++It can enable or disable multipathing and configure some common options. ++.B mpathconf ++can also load the ++.B dm_multipath ++module, start and stop the ++.B multipathd ++daemon, and configure the ++.B multipathd ++service to start automatically or not. If ++.B mpathconf ++is called with no commands, it will display the current configuration. ++ ++The default options for mpathconf are ++.B --with_module ++and ++.B --with_chkconfig. ++The ++.B --with_multipathd ++option is not set by default. Enabling multipathing will load the ++.B dm_multipath ++module and chkconfig ++.B multipathd ++to start on the next boot, but it will not immediately start it. This is so ++that users can manually edit their config file if necessary, before starting ++.B multipathd. ++ ++If ++.B /etc/multipath.conf ++already exists, mpathconf will edit it. If it does not exist, mpathconf will ++use ++.B /usr/share/doc/device-mapper-multipath-0.4.9/multipath.conf ++as the starting file. This file has ++.B user_friendly_names ++set. If this file does not exist, mpathconf will create ++.B /etc/multipath.conf ++from scratch. For most users, this means that ++.B user_friendly_names ++will be set by default, unless they use the ++.B --user_friendly_names n ++command. ++.SH COMMANDS ++.TP ++.B --enable ++Removes any line that blacklists all device nodes from the ++.B /etc/multipath.conf ++blacklist section. ++.TP ++.B --disable ++Adds a line that blacklists all device nodes to the ++.B /etc/multipath.conf ++blacklist section. If no blacklist section exists, it will create one. ++.TP ++.B --user_friendly_name \fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this adds the line ++.B user_friendly_names yes ++to the ++.B /etc/multipath.conf ++defaults section. If set to \fBn\fP, this removes the line, if present. This ++command can be used along with any other command. ++.TP ++.B --find_multipaths\fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this adds the line ++.B find_multipaths yes ++to the ++.B /etc/multipath.conf ++defaults section. If set to \fBn\fP, this removes the line, if present. This ++command can be used aldong with any other command. ++.SH OPTIONS ++.TP ++.B --with_module\fP { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B modprobe dm_multipath ++to install the multipath modules. This option only works with the ++.B --enable ++command. This option is set to \fBy\fP by default. ++.TP ++.B --with_multipathd { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B service multipathd start ++to start the multipathd daemon on \fB--enable\fP, ++.B service multipathd stop ++to start the multipathd daemon on \fB--disable\fP, and ++.B service multipathd reload ++to reconfigure multipathd on \fB--user_frindly_names\fP and ++\fB--find_multipaths\fP. ++This option is set to \fBn\fP by default. ++.TP ++.B --with_chkconfig { \fBy\fP | \fBn\fP } ++If set to \fBy\fP, this runs ++.B chkconfig multipathd on ++to set multipathd to start automatically on \fB--enable\fP and ++.B chkconfig multipathd off ++to stop multipathd for starting automatically on \fB--disable\fP. ++This option is set to \fBy\fP by default. ++.SH FILES ++.BR /etc/multipath.conf ++.SH "SEE ALSO" ++.BR multipath.conf (5), ++.BR chkconfig (8), ++.BR modprobe (8), ++.BR multipath (8), ++.BR multipathd (8), ++.BR service (8), ++.SH AUTHOR ++Benjamin Marzinski <bmarzins@redhat.com> +Index: multipath-tools/multipath/Makefile +=================================================================== +--- multipath-tools.orig/multipath/Makefile ++++ multipath-tools/multipath/Makefile +@@ -17,6 +17,7 @@ $(EXEC): $(OBJS) + $(CC) $(CFLAGS) $(OBJS) -o $(EXEC) $(LDFLAGS) + $(GZIP) $(EXEC).8 > $(EXEC).8.gz + $(GZIP) $(EXEC).conf.5 > $(EXEC).conf.5.gz ++ $(GZIP) mpathconf.8 > mpathconf.8.gz + + install: + $(INSTALL_PROGRAM) -d $(DESTDIR)$(bindir) +@@ -28,6 +29,7 @@ install: + $(INSTALL_PROGRAM) -m 644 $(EXEC).8.gz $(DESTDIR)$(mandir) + $(INSTALL_PROGRAM) -d $(DESTDIR)$(man5dir) + $(INSTALL_PROGRAM) -m 644 $(EXEC).conf.5.gz $(DESTDIR)$(man5dir) ++ $(INSTALL_PROGRAM) -m 644 mpathconf.8.gz $(DESTDIR)$(mandir) + + uninstall: + rm $(DESTDIR)/lib/udev/rules.d/multipath.rules +@@ -35,6 +37,7 @@ uninstall: + rm $(DESTDIR)$(bindir)/mpathconf + rm $(DESTDIR)$(mandir)/$(EXEC).8.gz + rm $(DESTDIR)$(man5dir)/$(EXEC).conf.5.gz ++ rm $(DESTDIR)$(mandir)/mpathconf.8.gz + + clean: + rm -f core *.o $(EXEC) *.gz |