/* Sample named.conf BIND DNS server 'named' configuration file for the Red Hat BIND distribution. See the BIND Administrator's Reference Manual (ARM) for details, in: file:///usr/share/doc/bind-{version}/arm/Bv9ARM.html Also see the BIND Configuration GUI : /usr/bin/system-config-bind and its manual. */ options { // Put files that named is allowed to write in the data/ directory: directory "/var/named"; // "Working" directory dump-file "data/cache_dump.db"; statistics-file "data/named_stats.txt"; memstatistics-file "data/named_mem_stats.txt"; /* Specify listenning interfaces. You can use list of addresses (';' is delimiter) or keywords "any"/"none" */ //listen-on port 53 { any; }; listen-on port 53 { 127.0.0.1; }; //listen-on-v6 port 53 { any; }; listen-on-v6 port 53 { ::1; }; /* Access restrictions There are two important options: allow-query { argument; }; - allow queries for authoritative data allow-query-cache { argument; }; - allow queries for non-authoritative data (mostly cached data) You can use address, network address or keywords "any"/"localhost"/"none" as argument Examples: allow-query { localhost; 10.0.0.1; 192.168.1.0/8; }; allow-query-cache { ::1; fe80::5c63:a8ff:fe2f:4526; 10.0.0.1; }; */ allow-query { localhost; }; allow-query-cache { localhost; }; // Enable/disable recursion - recursion yes/no; recursion yes; /* DNSSEC related options. See information about keys ("Trusted keys", bellow) */ /* Enable serving of DNSSEC related data - enable on both authoritative and recursive servers DNSSEC aware servers */ dnssec-enable yes; /* Enable DNSSEC validation on recursive servers */ dnssec-validation yes; /* Enable DLV by default, use built-in ISC DLV key. */ dnssec-lookaside auto; pid-file "/run/named/named.pid"; }; logging { /* If you want to enable debugging, eg. using the 'rndc trace' command, * named will try to write the 'named.run' file in the $directory (/var/named). * By default, SELinux policy does not allow named to modify the /var/named directory, * so put the default debug log file in data/ : */ channel default_debug { file "data/named.run"; severity dynamic; }; }; /* Views let a name server answer a DNS query differently depending on who is asking. By default, if named.conf contains no "view" clauses, all zones are in the "default" view, which matches all clients. Views are processed sequentially. The first match is used so the last view should match "any" - it's fallback and the most restricted view. If named.conf contains any "view" clause, then all zones MUST be in a view. */ view "localhost_resolver" { /* This view sets up named to be a localhost resolver ( caching only nameserver ). * If all you want is a caching-only nameserver, then you need only define this view: */ match-clients { localhost; }; recursion yes; # all views must contain the root hints zone: zone "." IN { type hint; file "/var/named/named.ca"; }; /* these are zones that contain definitions for all the localhost * names and addresses, as recommended in RFC1912 - these names should * not leak to the other nameservers: */ include "/etc/named.rfc1912.zones"; }; view "internal" { /* This view will contain zones you want to serve only to "internal" clients that connect via your directly attached LAN interfaces - "localnets" . */ match-clients { localnets; }; recursion yes; zone "." IN { type hint; file "/var/named/named.ca"; }; /* these are zones that contain definitions for all the localhost * names and addresses, as recommended in RFC1912 - these names should * not leak to the other nameservers: */ include "/etc/named.rfc1912.zones"; // These are your "authoritative" internal zones, and would probably // also be included in the "localhost_resolver" view above : /* NOTE for dynamic DNS zones and secondary zones: DO NOT USE SAME FILES IN MULTIPLE VIEWS! If you are using views and DDNS/secondary zones it is strongly recommended to read FAQ on ISC site (www.isc.org), section "Configuration and Setup Questions", questions "How do I share a dynamic zone between multiple views?" and "How can I make a server a slave for both an internal and an external view at the same time?" */ zone "my.internal.zone" { type master; file "my.internal.zone.db"; }; zone "my.slave.internal.zone" { type slave; file "slaves/my.slave.internal.zone.db"; masters { /* put master nameserver IPs here */ 127.0.0.1; } ; // put slave zones in the slaves/ directory so named can update them }; zone "my.ddns.internal.zone" { type master; allow-update { key ddns_key; }; file "dynamic/my.ddns.internal.zone.db"; // put dynamically updateable zones in the slaves/ directory so named can update them }; }; key ddns_key { algorithm hmac-md5; secret "use /usr/sbin/dnssec-keygen to generate TSIG keys"; }; view "external" { /* This view will contain zones you want to serve only to "external" clients * that have addresses that are not match any above view: */ match-clients { any; }; zone "." IN { type hint; file "/var/named/named.ca"; }; recursion no; // you'd probably want to deny recursion to external clients, so you don't // end up providing free DNS service to all takers // These are your "authoritative" external zones, and would probably // contain entries for just your web and mail servers: zone "my.external.zone" { type master; file "my.external.zone.db"; }; }; /* Trusted keys This statement contains DNSSEC keys. If you want DNSSEC aware resolver you have to configure at least one trusted key. Note that no key written below is valid. Especially root key because root zone is not signed yet. */ /* trusted-keys { // Root Key "." 257 3 3 "BNY4wrWM1nCfJ+CXd0rVXyYmobt7sEEfK3clRbGaTwSJxrGkxJWoZu6I7PzJu/ E9gx4UC1zGAHlXKdE4zYIpRhaBKnvcC2U9mZhkdUpd1Vso/HAdjNe8LmMlnzY3 zy2Xy4klWOADTPzSv9eamj8V18PHGjBLaVtYvk/ln5ZApjYghf+6fElrmLkdaz MQ2OCnACR817DF4BBa7UR/beDHyp5iWTXWSi6XmoJLbG9Scqc7l70KDqlvXR3M /lUUVRbkeg1IPJSidmK3ZyCllh4XSKbje/45SKucHgnwU5jefMtq66gKodQj+M iA21AfUVe7u99WzTLzY3qlxDhxYQQ20FQ97S+LKUTpQcq27R7AT3/V5hRQxScI Nqwcz4jYqZD2fQdgxbcDTClU0CRBdiieyLMNzXG3"; // Key for forward zone example.com. 257 3 5 "AwEAAaxPMcR2x0HbQV4WeZB6oEDX+r0QM65KbhTjrW1ZaARmPhEZZe 3Y9ifgEuq7vZ/zGZUdEGNWy+JZzus0lUptwgjGwhUS1558Hb4JKUbb OTcM8pwXlj0EiX3oDFVmjHO444gLkBO UKUf/mC7HvfwYH/Be22GnC lrinKJp1Og4ywzO9WglMk7jbfW33gUKvirTHr25GL7STQUzBb5Usxt 8lgnyTUHs1t3JwCY5hKZ6CqFxmAVZP20igTixin/1LcrgX/KMEGd/b iuvF4qJCyduieHukuY3H4XMAcR+xia2 nIUPvm/oyWR8BW/hWdzOvn SCThlHf3xiYleDbt/o1OTQ09A0="; // Key for reverse zone. 2.0.192.IN-ADDRPA.NET. 257 3 5 "AQOnS4xn/IgOUpBPJ3bogzwcxOdNax071L18QqZnQQQA VVr+iLhGTnNGp3HoWQLUIzKrJVZ3zggy3WwNT6kZo6c0 tszYqbtvchmgQC8CzKojM/W16i6MG/ea fGU3siaOdS0 yOI6BgPsw+YZdzlYMaIJGf4M4dyoKIhzdZyQ2bYQrjyQ 4LB0lC7aOnsMyYKHHYeRv PxjIQXmdqgOJGq+vsevG06 zW+1xgYJh9rCIfnm1GX/KMgxLPG2vXTD/RnLX+D3T3UL 7HJYHJhAZD5L59VvjSPsZJHeDCUyWYrvPZesZDIRvhDD 52SKvbheeTJUm6EhkzytNN2SN96QRk8j/iI8ib"; }; */