Rename package

Clean %changelog
Remove rewheel condition

1 files changed, 1905 insertions, 0 deletions

diff --git a/python34.spec b/python34.spec
new file mode 100644
index 0000000..1570a23
--- /dev/null
+++ b/python34.spec
@@ -0,0 +1,1905 @@
+# ======================================================
+# Conditionals and other variables controlling the build
+# ======================================================
+
+%global pybasever 3.4
+
+# pybasever without the dot:
+%global pyshortver 34
+
+%global pylibdir %{_libdir}/python%{pybasever}
+%global dynload_dir %{pylibdir}/lib-dynload
+
+# SOABI is defined in the upstream configure.in from Python-3.2a2 onwards,
+# for PEP 3149:
+#   http://www.python.org/dev/peps/pep-3149/
+
+# ("configure.in" became "configure.ac" in Python 3.3 onwards, and in
+# backports)
+
+# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile
+# With Python 3.3, we lose the "u" suffix due to PEP 393
+%global ABIFLAGS_optimized m
+%global ABIFLAGS_debug     dm
+
+%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized}
+%global LDVERSION_debug     %{pybasever}%{ABIFLAGS_debug}
+
+%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}
+%global SOABI_debug     cpython-%{pyshortver}%{ABIFLAGS_debug}
+
+# All bytecode files are now in a __pycache__ subdirectory, with a name
+# reflecting the version of the bytecode (to permit sharing of python libraries
+# between different runtimes)
+# See http://www.python.org/dev/peps/pep-3147/
+# For example,
+#   foo/bar.py
+# now has bytecode at:
+#   foo/__pycache__/bar.cpython-34.pyc
+#   foo/__pycache__/bar.cpython-34.pyo
+%global bytecode_suffixes .cpython-34.py?
+
+# Python's configure script defines SOVERSION, and this is used in the Makefile
+# to determine INSTSONAME, the name of the libpython DSO:
+#   LDLIBRARY='libpython$(VERSION).so'
+#   INSTSONAME="$LDLIBRARY".$SOVERSION
+# We mirror this here in order to make it easier to add the -gdb.py hooks.
+# (if these get out of sync, the payload of the libs subpackage will fail
+# and halt the build)
+%global py_SOVERSION 1.0
+%global py_INSTSONAME_optimized libpython%{LDVERSION_optimized}.so.%{py_SOVERSION}
+%global py_INSTSONAME_debug     libpython%{LDVERSION_debug}.so.%{py_SOVERSION}
+
+%global with_debug_build 1
+
+%global with_gdb_hooks 1
+
+%global with_systemtap 1
+
+# some arches don't have valgrind so we need to disable its support on them
+%ifnarch s390
+%global with_valgrind 1
+%else
+%global with_valgrind 0
+%endif
+
+%global with_gdbm 1
+
+# Change from yes to no to turn this off
+%global with_computed_gotos yes
+
+# Turn this to 0 to turn off the "check" phase:
+%global run_selftest_suite 1
+
+# We want to byte-compile the .py files within the packages using the new
+# python3 binary.
+# 
+# Unfortunately, rpmbuild's infrastructure requires us to jump through some
+# hoops to avoid byte-compiling with the system python 2 version:
+#   /usr/lib/rpm/redhat/macros sets up build policy that (amongst other things)
+# defines __os_install_post.  In particular, "brp-python-bytecompile" is
+# invoked without an argument thus using the wrong version of python
+# (/usr/bin/python, rather than the freshly built python), thus leading to
+# numerous syntax errors, and incorrect magic numbers in the .pyc files.  We
+# thus override __os_install_post to avoid invoking this script:
+%global __os_install_post /usr/lib/rpm/brp-compress \
+  %{!?__debug_package:/usr/lib/rpm/brp-strip %{__strip}} \
+  /usr/lib/rpm/brp-strip-static-archive %{__strip} \
+  /usr/lib/rpm/brp-strip-comment-note %{__strip} %{__objdump} \
+  /usr/lib/rpm/brp-python-hardlink 
+# to remove the invocation of brp-python-bytecompile, whilst keeping the
+# invocation of brp-python-hardlink (since this should still work for python3
+# pyc/pyo files)
+
+
+# We need to get a newer configure generated out of configure.in for the following
+# patches:
+#   patch 55 (systemtap)
+#   patch 113 (more config flags)
+#
+# For patch 55 (systemtap), we need to get a new header for configure to use
+#
+# configure.in requires autoconf-2.65, but the version in Fedora is currently
+# autoconf-2.66
+#
+# For now, we'll generate a patch to the generated configure script and
+# pyconfig.h.in on a machine that has a local copy of autoconf 2.65
+#
+# Instructions on obtaining such a copy can be seen at
+#   http://bugs.python.org/issue7997
+#
+# To make it easy to regenerate the patch, this specfile can be run in two
+# ways:
+# (i) regenerate_autotooling_patch  0 : the normal approach: prep the
+# source tree using a pre-generated patch to the "configure" script, and do a
+# full build
+# (ii) regenerate_autotooling_patch 1 : intended to be run on a developer's
+# workstation: prep the source tree without patching configure, then rerun a
+# local copy of autoconf-2.65, regenerate the patch, then exit, without doing
+# the rest of the build
+%global regenerate_autotooling_patch 0
+
+
+# ==================
+# Top-level metadata
+# ==================
+Summary: Version 3 of the Python programming language aka Python 3000
+Name: python%{pyshortver}
+Version: %{pybasever}.3
+Release: 11%{?dist}
+License: Python
+Group: Development/Languages
+
+
+# =======================
+# Build-time requirements
+# =======================
+
+# (keep this list alphabetized)
+
+BuildRequires: autoconf
+BuildRequires: bluez-libs-devel
+BuildRequires: bzip2
+BuildRequires: bzip2-devel
+BuildRequires: db4-devel >= 4.7
+
+# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME.  We use
+# it (in pyexpat) in order to enable the fix in Python-3.2.3 for CVE-2012-0876:
+BuildRequires: expat-devel >= 2.1.0
+
+BuildRequires: findutils
+BuildRequires: gcc-c++
+%if %{with_gdbm}
+BuildRequires: gdbm-devel
+%endif
+BuildRequires: glibc-devel
+BuildRequires: gmp-devel
+BuildRequires: libffi-devel
+BuildRequires: libGL-devel
+BuildRequires: libX11-devel
+BuildRequires: ncurses-devel
+# workaround http://bugs.python.org/issue19804 (test_uuid requires ifconfig)
+BuildRequires: net-tools
+BuildRequires: openssl-devel
+BuildRequires: pkgconfig
+BuildRequires: readline-devel
+BuildRequires: sqlite-devel
+
+%if 0%{?with_systemtap}
+BuildRequires: systemtap-sdt-devel
+# (this introduces a dependency on "python", in that systemtap-sdt-devel's
+# /usr/bin/dtrace is a python 2 script)
+%global tapsetdir      /usr/share/systemtap/tapset
+%endif # with_systemtap
+
+BuildRequires: tar
+BuildRequires: tcl-devel
+BuildRequires: tix-devel
+BuildRequires: tk-devel
+
+%if 0%{?with_valgrind}
+BuildRequires: valgrind-devel
+%endif
+
+BuildRequires: xz-devel
+BuildRequires: zlib-devel
+
+
+# =======================
+# Source code and patches
+# =======================
+
+Source: http://www.python.org/ftp/python/%{version}/Python-%{version}.tar.xz
+
+# Avoid having various bogus auto-generated Provides lines for the various
+# python c modules' SONAMEs:
+Source1: find-provides-without-python-sonames.sh
+%global _use_internal_dependency_generator 0
+%global __find_provides %{SOURCE1}
+
+# Supply an RPM macro "py_byte_compile" for the python3-devel subpackage
+# to enable specfiles to selectively byte-compile individual files and paths
+# with different Python runtimes as necessary:
+Source3: macros.pybytecompile%{pybasever}
+
+# Systemtap tapset to make it easier to use the systemtap static probes
+# (actually a template; LIBRARY_PATH will get fixed up during install)
+# Written by dmalcolm; not yet sent upstream
+Source5: libpython.stp
+
+# Example systemtap script using the tapset
+# Written by wcohen, mjw, dmalcolm; not yet sent upstream
+Source6: systemtap-example.stp
+
+# Another example systemtap script that uses the tapset
+# Written by dmalcolm; not yet sent upstream
+Source7: pyfuntop.stp
+
+# A simple script to check timestamps of bytecode files
+# Run in check section with Python that is currently being built
+# Written by bkabrda
+Source8: check-pyc-and-pyo-timestamps.py
+
+# Fixup distutils/unixccompiler.py to remove standard library path from rpath:
+# Was Patch0 in ivazquez' python3000 specfile:
+Patch1:         Python-3.1.1-rpath.patch
+
+# Some tests were removed due to audiotest.au not being packaged. This was
+# however added to the archive in 3.3.1, so we no longer delete the tests.
+#  Patch3: 00003-remove-mimeaudio-tests.patch
+
+# 00055 #
+# Systemtap support: add statically-defined probe points
+# Patch sent upstream as http://bugs.python.org/issue14776
+# with some subsequent reworking to cope with LANG=C in an rpmbuild
+# (where sys.getfilesystemencoding() == 'ascii')
+Patch55: 00055-systemtap.patch
+
+Patch102: 00102-lib64.patch
+
+# 00104 #
+# Only used when "%{_lib}" == "lib64"
+# Another lib64 fix, for distutils/tests/test_install.py; not upstream:
+Patch104: 00104-lib64-fix-for-test_install.patch
+
+# 00111 #
+# Patch the Makefile.pre.in so that the generated Makefile doesn't try to build
+# a libpythonMAJOR.MINOR.a (bug 550692):
+# Downstream only: not appropriate for upstream
+Patch111: 00111-no-static-lib.patch
+
+# 00112 #
+# Patch112: python-2.7rc1-debug-build.patch: this is not relevant to Python 3,
+# for 3.2 onwards
+
+# 00113 #
+# Add configure-time support for the COUNT_ALLOCS and CALL_PROFILE options
+# described at http://svn.python.org/projects/python/trunk/Misc/SpecialBuilds.txt
+# so that if they are enabled, they will be in that build's pyconfig.h, so that
+# extension modules will reliably use them
+# Not yet sent upstream
+Patch113: 00113-more-configuration-flags.patch
+
+# 00114 #
+# Upstream as of Python 3.4.0.b2
+#  Patch114: 00114-statvfs-f_flag-constants.patch
+
+# 00125 #
+# COUNT_ALLOCS is useful for debugging, but the upstream behaviour of always
+# emitting debug info to stdout on exit is too verbose and makes it harder to
+# use the debug build.  Add a "PYTHONDUMPCOUNTS" environment variable which
+# must be set to enable the output on exit
+# Not yet sent upstream
+Patch125: 00125-less-verbose-COUNT_ALLOCS.patch
+
+# 00130 #
+# Python 2's:
+#   Patch130: python-2.7.2-add-extension-suffix-to-python-config.patch
+# is not relevant to Python 3 (for 3.2 onwards)
+
+# 00131 #
+# The four tests in test_io built on top of check_interrupted_write_retry
+# fail when built in Koji, for ppc and ppc64; for some reason, the SIGALRM
+# handlers are never called, and the call to write runs to completion
+# (rhbz#732998)
+Patch131: 00131-disable-tests-in-test_io.patch
+
+# 00132 #
+# Add non-standard hooks to unittest for use in the "check" phase below, when
+# running selftests within the build:
+#   @unittest._skipInRpmBuild(reason)
+# for tests that hang or fail intermittently within the build environment, and:
+#   @unittest._expectedFailureInRpmBuild
+# for tests that always fail within the build environment
+#
+# The hooks only take effect if WITHIN_PYTHON_RPM_BUILD is set in the
+# environment, which we set manually in the appropriate portion of the "check"
+# phase below (and which potentially other python-* rpms could set, to reuse
+# these unittest hooks in their own "check" phases)
+Patch132: 00132-add-rpmbuild-hooks-to-unittest.patch
+
+# 00133 #
+# 00133-skip-test_dl.patch is not relevant for python3: the "dl" module no
+# longer exists
+
+# 00134 #
+# Fix a failure in test_sys.py when configured with COUNT_ALLOCS enabled
+# Not yet sent upstream
+Patch134: 00134-fix-COUNT_ALLOCS-failure-in-test_sys.patch
+
+# 00135 #
+# test_weakref's test_callback_in_cycle_resurrection doesn't work with
+# COUNT_ALLOCS, as the metrics keep "C" alive.  Work around this for our
+# debug build:
+# Not yet sent upstream
+Patch135: 00135-fix-test-within-test_weakref-in-debug-build.patch
+
+# 00136 #
+# Patch136: 00136-skip-tests-of-seeking-stdin-in-rpmbuild.patch does not seem
+# to be needed by python3
+
+# 00137 #
+# Some tests within distutils fail when run in an rpmbuild:
+Patch137: 00137-skip-distutils-tests-that-fail-in-rpmbuild.patch
+
+# 00138 #
+# Patch138: 00138-fix-distutils-tests-in-debug-build.patch is not relevant for
+# python3
+
+# 00139 #
+# ARM-specific: skip known failure in test_float:
+#  http://bugs.python.org/issue8265 (rhbz#706253)
+Patch139: 00139-skip-test_float-known-failure-on-arm.patch
+
+# ideally short lived patch disabling a test thats fragile on different arches
+Patch140: python3-arm-skip-failing-fragile-test.patch
+
+# Patch140: 00140-skip-test_ctypes-known-failure-on-sparc.patch does not appear
+# to be relevant for python3
+
+# 00141 #
+# Fix tests for case when  tests for case when configured with
+# COUNT_ALLOCS (debug build): http://bugs.python.org/issue19527
+# Applies to: test_gc, test_module, test_io, test_logging, test_warnings,
+#             test_threading
+Patch141: 00141-fix-tests_with_COUNT_ALLOCS.patch
+
+# 00143 #
+# Fix the --with-tsc option on ppc64, and rework it on 32-bit ppc to avoid
+# aliasing violations (rhbz#698726)
+# Sent upstream as http://bugs.python.org/issue12872
+Patch143: 00143-tsc-on-ppc.patch
+
+# 00144 #
+# (Optionally) disable the gdbm module:
+# python.spec's
+#   Patch144: 00144-no-gdbm.patch
+# is not needed in python3.spec
+
+# 00145 #
+# python.spec's
+#   Patch145: 00145-force-sys-platform-to-be-linux2.patch
+# is upstream for Python 3 as of 3.2.2
+
+# 00146 #
+# Support OpenSSL FIPS mode (e.g. when OPENSSL_FORCE_FIPS_MODE=1 is set)
+# - handle failures from OpenSSL (e.g. on attempts to use MD5 in a
+#   FIPS-enforcing environment)
+# - add a new "usedforsecurity" keyword argument to the various digest
+#   algorithms in hashlib so that you can whitelist a callsite with
+#   "usedforsecurity=False"
+# (sent upstream for python 3 as http://bugs.python.org/issue9216 ; see RHEL6
+# python patch 119)
+# - enforce usage of the _hashlib implementation: don't fall back to the _md5
+#   and _sha* modules (leading to clearer error messages if fips selftests
+#   fail)
+# - don't build the _md5 and _sha* modules; rely on the _hashlib implementation
+#   of hashlib
+# (rhbz#563986)
+# Note: Up to Python 3.4.0.b1, upstream had their own implementation of what
+# they assumed would become sha3. This patch was adapted to give it the
+# usedforsecurity argument, even though it did nothing (OpenSSL didn't have
+# sha3 implementation at that time).In 3.4.0.b2, sha3 implementation was reverted
+# (see http://bugs.python.org/issue16113), but the alterations were left in the
+# patch, since they may be useful again if upstream decides to rerevert sha3
+# implementation and OpenSSL still doesn't support it. For now, they're harmless.
+Patch146: 00146-hashlib-fips.patch
+
+# 00147 #
+# Add a sys._debugmallocstats() function
+# Sent upstream as http://bugs.python.org/issue14785
+# Upstream as of Python 3.3.0
+#  Patch147: 00147-add-debug-malloc-stats.patch
+
+# 00148 #
+# Upstream as of Python 3.2.3:
+#  Patch148: 00148-gdbm-1.9-magic-values.patch
+
+# 00149 #
+# Upstream as of Python 3.2.3:
+#  Patch149: 00149-backport-issue11254-pycache-bytecompilation-fix.patch
+
+# 00150 #
+# temporarily disable rAssertAlmostEqual in test_cmath on PPC (bz #750811)
+# caused by a glibc bug. This patch can be removed when we have a glibc with
+# the patch mentioned here:
+#   http://sourceware.org/bugzilla/show_bug.cgi?id=13472
+Patch150: 00150-disable-rAssertAlmostEqual-cmath-on-ppc.patch
+
+# 00151 #
+# python.spec had:
+#  Patch151: 00151-fork-deadlock.patch
+
+# 00152 #
+# Fix a regex in test_gdb so that it doesn't choke when gdb provides a full
+# path to Python/bltinmodule.c:
+# Committed upstream as 77824:abcd29c9a791 as part of fix for
+# http://bugs.python.org/issue12605
+#  Patch152: 00152-fix-test-gdb-regex.patch
+
+# 00153 #
+# Strip out lines of the form "warning: Unable to open ..." from gdb's stderr
+# when running test_gdb.py; also cope with change to gdb in F17 onwards in
+# which values are printed as "v@entry" rather than just "v":
+# Not yet sent upstream
+# Upstream as of 3.4.3
+#  Patch153: 00153-fix-test_gdb-noise.patch
+
+# 00154 #
+# python3.spec on f15 has:
+#  Patch154: 00154-skip-urllib-test-requiring-working-DNS.patch
+
+# 00155 #
+# Avoid allocating thunks in ctypes unless absolutely necessary, to avoid
+# generating SELinux denials on "import ctypes" and "import uuid" when
+# embedding Python within httpd (rhbz#814391)
+Patch155: 00155-avoid-ctypes-thunks.patch
+
+# 00156 #
+# Recent builds of gdb will only auto-load scripts from certain safe
+# locations.  Turn off this protection when running test_gdb in the selftest
+# suite to ensure that it can load our -gdb.py script (rhbz#817072):
+# Upsream as of 3.4.3
+#  Patch156: 00156-gdb-autoload-safepath.patch
+
+# 00157 #
+# Update uid/gid handling throughout the standard library: uid_t and gid_t are
+# unsigned 32-bit values, but existing code often passed them through C long
+# values, which are signed 32-bit values on 32-bit architectures, leading to
+# negative int objects for uid/gid values >= 2^31 on 32-bit architectures.
+#
+# Introduce _PyObject_FromUid/Gid to convert uid_t/gid_t values to python
+# objects, using int objects where the value will fit (long objects otherwise),
+# and _PyArg_ParseUid/Gid to convert int/long to uid_t/gid_t, with -1 allowed
+# as a special case (since this is given special meaning by the chown syscall)
+#
+# Update standard library to use this throughout for uid/gid values, so that
+# very large uid/gid values are round-trippable, and -1 remains usable.
+# (rhbz#697470)
+Patch157: 00157-uid-gid-overflows.patch
+
+# 00158 #
+# Upstream as of Python 3.3.1
+
+# 00159 #
+#  Patch159: 00159-correct-libdb-include-path.patch
+# in python.spec
+# TODO: python3 status?
+
+# 00160 #
+# Python 3.3 added os.SEEK_DATA and os.SEEK_HOLE, which may be present in the
+# header files in the build chroot, but may not be supported in the running
+# kernel, hence we disable this test in an rpm build.
+# Adding these was upstream issue http://bugs.python.org/issue10142
+# Not yet sent upstream
+Patch160: 00160-disable-test_fs_holes-in-rpm-build.patch
+
+# 00161 #
+# (Was only needed for Python 3.3.0b1)
+
+# 00162 #
+# (Was only needed for Python 3.3.0b1)
+
+# 00163 #
+# Some tests within test_socket fail intermittently when run inside Koji;
+# disable them using unittest._skipInRpmBuild
+# Not yet sent upstream
+Patch163: 00163-disable-parts-of-test_socket-in-rpm-build.patch
+
+# 0164 #
+# some tests in test._io interrupted_write-* fail on PPC (rhbz#846849)
+# testChainingDescriptors  test in test_exceptions fails on PPc, too (rhbz#846849)
+# disable those tests so that rebuilds on PPC can continue
+Patch164: 00164-disable-interrupted_write-tests-on-ppc.patch
+
+# 00165 #
+# python.spec has:
+#   Patch165: 00165-crypt-module-salt-backport.patch
+# which is a backport from 3.3 and thus not relevant to "python3"
+
+# 00166 #
+#  Patch166: 00166-fix-fake-repr-in-gdb-hooks.patch
+# in python.spec
+# TODO: python3 status?
+
+# 00167 #
+#  Patch167: 00167-disable-stack-navigation-tests-when-optimized-in-test_gdb.patch
+# in python.spec
+# TODO: python3 status?
+
+# 00168 #
+#  Patch168: 00168-distutils-cflags.patch
+# in python.spec
+# TODO: python3 status?
+
+# 00169 #
+#  Patch169: 00169-avoid-implicit-usage-of-md5-in-multiprocessing.patch
+# in python.spec
+# TODO: python3 status?
+
+# 00170 #                                                                                           
+# In debug builds, try to print repr() when a C-level assert fails in the                           
+# garbage collector (typically indicating a reference-counting error                                
+# somewhere else e.g in an extension module)                                                        
+# Backported to 2.7 from a patch I sent upstream for py3k                                           
+#   http://bugs.python.org/issue9263  (rhbz#614680)                                                 
+# hiding the proposed new macros/functions within gcmodule.c to avoid exposing                      
+# them within the extension API.                                                                    
+# (rhbz#850013
+Patch170: 00170-gc-assertions.patch
+
+# 00171 #
+# python.spec had:
+#  Patch171: 00171-raise-correct-exception-when-dev-urandom-is-missing.patch
+# TODO: python3 status?
+
+# 00172 #
+# python.spec had:
+#  Patch172: 00172-use-poll-for-multiprocessing-socket-connection.patch
+# TODO: python3 status?
+
+# 00173 #
+# Workaround for ENOPROTOOPT seen in Koji withi test.support.bind_port()
+# (rhbz#913732)
+Patch173: 00173-workaround-ENOPROTOOPT-in-bind_port.patch
+
+# 00174 #
+#  Patch174: 00174-fix-for-usr-move.patch
+# TODO: python3 status?
+
+# 00175 #
+# Upstream as of Python 3.3.2
+#  Patch175: 00175-fix-configure-Wformat.patch
+
+# 00176 #
+# Fixed upstream as of Python 3.3.1
+#  Patch176: 00176-upstream-issue16754-so-extension.patch
+
+# 00177 #
+# Fixed upstream as of Python 3.4.0.b2
+#  Patch177: 00177-platform-unicode.patch
+
+# 00178 #
+# Don't duplicate various FLAGS in sysconfig values
+# http://bugs.python.org/issue17679
+# Does not affect python2 AFAICS (different sysconfig values initialization)
+Patch178: 00178-dont-duplicate-flags-in-sysconfig.patch
+
+# 00179 #
+# Workaround for https://bugzilla.redhat.com/show_bug.cgi?id=951802
+# Reported upstream in http://bugs.python.org/issue17737
+# This patch basically looks at every frame and if it is somehow corrupted,
+# it just stops printing the traceback - it doesn't fix the actual bug.
+# This bug seems to only affect ARM.
+# Doesn't seem to affect Python 2 AFAICS.
+Patch179: 00179-dont-raise-error-on-gdb-corrupted-frames-in-backtrace.patch
+
+# 00180 #
+# Enable building on ppc64p7
+# Not appropriate for upstream, Fedora-specific naming
+Patch180: 00180-python-add-support-for-ppc64p7.patch
+
+# 00181 #
+# python.spec has
+#  Patch181: 00181-allow-arbitrary-timeout-in-condition-wait.patch
+# Does not affect python3
+
+# 00182 #
+# Fixed upstream as of Python 3.3.2
+#  Patch182: 00182-fix-test_gdb-test_threads.patch
+
+# 00183 #
+# Fixed upstream as of Python 3.4.0a4
+#  Patch183: 00183-cve-2013-2099-fix-ssl-match_hostname-dos.patch
+
+# 00184 #
+# Fix for https://bugzilla.redhat.com/show_bug.cgi?id=979696
+# Fixes build of ctypes against libffi with multilib wrapper
+# Python recognizes ffi.h only if it contains "#define LIBFFI_H",
+# but the wrapper doesn't contain that, which makes the build fail
+# We patch this by also accepting "#define ffi_wrapper_h"
+Patch184: 00184-ctypes-should-build-with-libffi-multilib-wrapper.patch
+
+# 00185 #
+# Fixed upstream as of Python 3.4.0a4
+#  Patch185: 00185-CVE-2013-4238-hostname-check-bypass-in-SSL-module.patch
+
+# 00186 #
+# Fix for https://bugzilla.redhat.com/show_bug.cgi?id=1023607
+# Previously, this fixed a problem where some *.py files were not being
+# bytecompiled properly during build. This was result of py_compile.compile
+# raising exception when trying to convert test file with bad encoding, and
+# thus not continuing bytecompilation for other files.
+# This was fixed upstream, but the test hasn't been merged yet, so we keep it
+Patch186: 00186-dont-raise-from-py_compile.patch
+
+# 00187 #
+# Fixed upstream as of Python 3.4.0b1
+#  Patch187: 00187-remove-pthread-atfork.patch
+
+# 00188 #
+# Downstream only patch that should be removed when we compile all guaranteed
+# hashlib algorithms properly. The problem is this:
+# - during tests, test_hashlib is imported and executed before test_lib2to3
+# - if at least one hash function has failed, trying to import it triggers an
+#   exception that is being caught and exception is logged:
+#   http://hg.python.org/cpython/file/2de806c8b070/Lib/hashlib.py#l217
+# - logging the exception makes logging module run basicConfig
+# - when lib2to3 tests are run again, lib2to3 runs basicConfig again, which
+#   doesn't do anything, because it was run previously
+#   (logging.root.handlers != []), which means that the default setup
+#   (most importantly logging level) is not overriden. That means that a test
+#   relying on this will fail (test_filename_changing_on_output_single_dir)
+Patch188: 00188-fix-lib2to3-tests-when-hashlib-doesnt-compile-properly.patch
+
+# 00190 #
+#
+# Fix tests with SQLite >= 3.8.4
+# http://bugs.python.org/issue20901
+# http://hg.python.org/cpython/rev/4d626a9df062
+# FIXED UPSTREAM
+# Patch190: 00190-fix-tests-with-sqlite-3.8.4.patch
+
+# 00193
+#
+# Skip correct number of *.pyc file bytes in ModuleFinder.load_module
+# rhbz#1060338
+# http://bugs.python.org/issue20778
+# FIXED UPSTREAM
+# Patch193: 00193-skip-correct-num-of-pycfile-bytes-in-modulefinder.patch
+
+# Tests requiring SIGHUP to work don't work in Koji
+# see rhbz#1088233
+Patch194: temporarily-disable-tests-requiring-SIGHUP.patch
+
+# 00195
+#
+# Don't declare Werror=declaration-after-statement for extension
+# modules through setup.py
+# http://bugs.python.org/issue21121
+# FIXED UPSTREAM
+# Patch195: 00195-dont-add-Werror-declaration-after-statement.patch
+
+# 00196
+#
+#  Fix test_gdb failure on ppc64le
+Patch196: 00196-test-gdb-match-addr-before-builtin.patch
+
+# 00197
+#
+# The CGIHTTPServer Python module did not properly handle URL-encoded
+# path separators in URLs. This may have enabled attackers to disclose a CGI
+# script's source code or execute arbitrary scripts in the server's
+# document root.
+# FIXED UPSTREAM
+# Patch197: 00197-fix-CVE-2014-4650.patch
+
+# OpenSSL disabled SSLv3 in SSLv23 method
+# This patch alters python tests to reflect this change
+# Issue: http://bugs.python.org/issue22638 Upstream discussion about SSLv3 in Python
+Patch199: 00199-alter-tests-to-reflect-sslv3-disabled.patch
+
+# 00200 #                                                                                           
+# Fix for gettext plural form headers (lines that begin with "#")                                   
+# Note: Backported from scl
+Patch200: 00200-gettext-plural-fix.patch
+
+# 00201 #                                                                                           
+# Fixes memory leak in gdbm module (rhbz#977308)                                                    
+# This was upstreamed as a part of bigger patch, but for our purposes                               
+# this is ok: http://bugs.python.org/issue18404                                                     
+# Note: Backported from scl
+Patch201: 00201-fix-memory-leak-in-gdbm.patch 
+
+# 00202 #
+# Fixes undefined behaviour in faulthandler which caused test to hang on x86_64
+# http://bugs.python.org/issue23433
+Patch202: 00202-fix-undefined-behaviour-in-faulthandler.patch
+
+# test_threading fails in koji dues to it's handling of signals
+Patch203: 00203-disable-threading-test-koji.patch
+
+# openssl requires DH keys to be > 768bits
+Patch204: 00204-increase-dh-keys-size.patch
+
+# 00209 #
+# CVE-2016-5636: http://seclists.org/oss-sec/2016/q2/560
+# rhbz#1345859: https://bugzilla.redhat.com/show_bug.cgi?id=1345859
+# https://hg.python.org/cpython/rev/10dad6da1b28/
+# https://hg.python.org/cpython/rev/5533a9e02b21
+# Fix possible integer overflow and heap corruption in zipimporter.get_data()
+# FIXED UPSTREAM: https://bugs.python.org/issue26171
+Patch209: 00209-CVE-2016-5636-buffer-overflow-in-zipimport-module-fix.patch
+
+# 00210 #
+# CVE-2016-0772 python: smtplib StartTLS stripping attack
+# rhbz#1303647: https://bugzilla.redhat.com/show_bug.cgi?id=1303647
+# rhbz#1346345: https://bugzilla.redhat.com/show_bug.cgi?id=1346345
+# FIXED UPSTREAM: https://hg.python.org/cpython/rev/d590114c2394
+# Raise an error when STARTTLS fails
+Patch210: 00210-Raise-an-error-when-STARTTLS-fails.patch
+
+# 00211 #
+# CVE-2016-5699 python: http protocol steam injection attack
+#   https://bugzilla.redhat.com/show_bug.cgi?id=1303699
+#   FIXED UPSTREAM: https://hg.python.org/cpython/rev/bf3e1c9b80e9
+# Disabled HTTP header injections in http.client
+# Resolves: rhbz#1331392
+Patch211: 00211-Disabled-HTTP-header-injections-in-http-client.patch
+
+# 00212 #
+# Fix test breakage with version 2.2.0 of Expat
+# rhbz#1353918: https://bugzilla.redhat.com/show_bug.cgi?id=1353918
+# NOT YET FIXED UPSTREAM: http://bugs.python.org/issue27369
+Patch212: 00212-fix-test-pyexpat-failure.patch
+
+# (New patches go here ^^^)
+#
+# When adding new patches to "python" and "python3" in Fedora 17 onwards,
+# please try to keep the patch numbers in-sync between the two specfiles:
+#
+#   - use the same patch number across both specfiles for conceptually-equivalent
+#     fixes, ideally with the same name
+#
+#   - when a patch is relevant to both specfiles, use the same introductory
+#     comment in both specfiles where possible (to improve "diff" output when
+#     comparing them)
+#
+#   - when a patch is only relevant for one of the two specfiles, leave a gap
+#     in the patch numbering in the other specfile, adding a comment when
+#     omitting a patch, both in the manifest section here, and in the "prep"
+#     phase below
+#
+# Hopefully this will make it easier to ensure that all relevant fixes are
+# applied to both versions.
+
+# This is the generated patch to "configure"; see the description of
+#   %{regenerate_autotooling_patch}
+# above:
+Patch5000: 05000-autotool-intermediates.patch
+
+BuildRoot: %{_tmppath}/%{name}-%{version}-root
+
+# ======================================================
+# Additional metadata, and subpackages
+# ======================================================
+
+URL: http://www.python.org/
+
+# See notes in bug 532118:
+Provides: python(abi) = %{pybasever}
+
+Requires: %{name}-libs%{?_isa} = %{version}-%{release}
+
+%description
+Python 3 is a new version of the language that is incompatible with the 2.x
+line of releases. The language is mostly the same, but many details, especially
+how built-in objects like dictionaries and strings work, have changed
+considerably, and a lot of deprecated features have finally been removed.
+
+%package libs
+Summary:        Python 3 runtime libraries
+Group:          Development/Libraries
+#Requires:       %{name} = %{version}-%{release}
+
+# expat 2.1.0 added the symbol XML_SetHashSalt without bumping SONAME.  We use
+# this symbol (in pyexpat), so we must explicitly state this dependency to
+# prevent "import pyexpat" from failing with a linker error if someone hasn't
+# yet upgraded expat:
+Requires: expat >= 2.1.0
+
+%description libs
+This package contains files used to embed Python 3 into applications.
+
+%package devel
+Summary: Libraries and header files needed for Python 3 development
+Group: Development/Libraries
+Requires: %{name} = %{version}-%{release}
+Requires: %{name}-libs%{?_isa} = %{version}-%{release}
+BuildRequires: python-rpm-macros
+Requires: python-rpm-macros
+Requires: python3-rpm-macros
+Conflicts: %{name} < %{version}-%{release}
+
+%description devel
+This package contains libraries and header files used to build applications
+with and native libraries for Python 3
+
+%package tools
+Summary: A collection of tools included with Python 3
+Group: Development/Tools
+Requires: %{name} = %{version}-%{release}
+Requires: %{name}-tkinter = %{version}-%{release}
+
+%description tools
+This package contains several tools included with Python 3
+
+%package tkinter
+Summary: A GUI toolkit for Python 3
+Group: Development/Languages
+Requires: %{name} = %{version}-%{release}
+
+%description tkinter
+The Tkinter (Tk interface) program is an graphical user interface for
+the Python scripting language.
+
+%package test
+Summary: The test modules from the main python 3 package
+Group: Development/Languages
+Requires: %{name} = %{version}-%{release}
+Requires: %{name}-tools = %{version}-%{release}
+
+%description test
+The test modules from the main %{name} package.
+These are in a separate package to save space, as they are almost never used
+in production.
+
+You might want to install the python3-test package if you're developing
+python 3 code that uses more than just unittest and/or test_support.py.
+
+%if 0%{?with_debug_build}
+%package debug
+Summary: Debug version of the Python 3 runtime
+Group: Applications/System
+
+# The debug build is an all-in-one package version of the regular build, and
+# shares the same .py/.pyc files and directories as the regular build.  Hence
+# we depend on all of the subpackages of the regular build:
+Requires: %{name}%{?_isa} = %{version}-%{release}
+Requires: %{name}-libs%{?_isa} = %{version}-%{release}
+Requires: %{name}-devel%{?_isa} = %{version}-%{release}
+Requires: %{name}-test%{?_isa} = %{version}-%{release}
+Requires: %{name}-tkinter%{?_isa} = %{version}-%{release}
+Requires: %{name}-tools%{?_isa} = %{version}-%{release}
+
+%description debug
+python3-debug provides a version of the Python 3 runtime with numerous debugging
+features enabled, aimed at advanced Python users, such as developers of Python
+extension modules.
+
+This version uses more memory and will be slower than the regular Python 3 build,
+but is useful for tracking down reference-counting issues, and other bugs.
+
+The bytecodes are unchanged, so that .pyc files are compatible between the two
+versions of Python 3, but the debugging features mean that C/C++ extension
+modules are ABI-incompatible with those built for the standard runtime.
+
+It shares installation directories with the standard Python 3 runtime, so that
+.py and .pyc files can be shared.  All compiled extension modules gain a "_d"
+suffix ("foo_d.so" rather than "foo.so") so that each Python 3 implementation
+can load its own extensions.
+%endif # with_debug_build
+
+# ======================================================
+# The prep phase of the build:
+# ======================================================
+
+%prep
+%setup -q -n Python-%{version}%{?prerel}
+chmod +x %{SOURCE1}
+
+%if 0%{?with_systemtap}
+# Provide an example of usage of the tapset:
+cp -a %{SOURCE6} .
+cp -a %{SOURCE7} .
+%endif # with_systemtap
+
+# Ensure that we're using the system copy of various libraries, rather than
+# copies shipped by upstream in the tarball:
+#   Remove embedded copy of expat:
+rm -r Modules/expat || exit 1
+
+#   Remove embedded copy of libffi:
+for SUBDIR in darwin libffi libffi_arm_wince libffi_msvc libffi_osx ; do
+  rm -r Modules/_ctypes/$SUBDIR || exit 1 ;
+done
+
+#   Remove embedded copy of zlib:
+rm -r Modules/zlib || exit 1
+
+# Don't build upstream Python's implementation of these crypto algorithms;
+# instead rely on _hashlib and OpenSSL.
+#
+# For example, in our builds hashlib.md5 is implemented within _hashlib via
+# OpenSSL (and thus respects FIPS mode), and does not fall back to _md5
+# TODO: there seems to be no OpenSSL support in Python for sha3 so far
+# when it is there, also remove _sha3/ dir
+for f in md5module.c sha1module.c sha256module.c sha512module.c; do
+    rm Modules/$f
+done
+
+#
+# Apply patches:
+#
+%patch1 -p1
+# 3: upstream as of Python 3.3.1
+
+%if 0%{?with_systemtap}
+%patch55 -p1 -b .systemtap
+%endif
+
+%if "%{_lib}" == "lib64"
+%patch102 -p1
+%patch104 -p1
+%endif
+
+
+%patch111 -p1
+# 112: not for python3
+%patch113 -p1
+# 00114: Upstream as of Python 3.4.0.b2
+
+%patch125 -p1 -b .less-verbose-COUNT_ALLOCS
+
+%ifarch ppc %{power64}
+%patch131 -p1
+%endif
+
+%patch132 -p1
+# 00133: not for python3
+%patch134 -p1
+%patch135 -p1
+# 00136: not for python3
+%patch137 -p1
+# 00138: not for python3
+%ifarch %{arm}
+%patch139 -p1
+%patch140 -p1
+%endif
+# 00140: not for python3
+%patch141 -p1
+%patch143 -p1 -b .tsc-on-ppc
+# 00144: not for python3
+# 00145: not for python3
+%patch146 -p1
+# 00147: upstream as of Python 3.3.0
+# 00148: upstream as of Python 3.2.3
+# 00149: upstream as of Python 3.2.3
+%ifarch ppc %{power64}
+%patch150 -p1
+%endif
+# 00151: not for python3
+# 00152: upstream as of Python 3.3.0b2
+# 00153: upstream as of Python 3.4.3
+# 00154: not for this branch
+%patch155 -p1
+# 00156: upstream as of 3.4.3
+%patch157 -p1
+#00158: FIXME
+#00159: FIXME
+%patch160 -p1
+# 00161: was only needed for Python 3.3.0b1
+# 00162: was only needed for Python 3.3.0b1
+%patch163 -p1
+%ifarch ppc %{power64}
+%patch164 -p1
+%endif
+#00165: TODO
+#00166: TODO
+#00167: TODO
+#00168: TODO
+#00169: TODO
+#00170: TODO
+#00171: TODO
+#00172: TODO
+%patch173 -p1
+#00174: TODO
+# 00175: upstream as of Python 3.3.2
+# 00176: upstream as of Python 3.3.1
+# 00177: upstream as of Python 3.4.0.b2
+%patch178 -p1
+%patch179 -p1
+%patch180 -p1
+# 00181: not for python3
+# 00182: upstream as of Python 3.3.2
+# 00183  upstream as of Python 3.4.0a4
+%patch184  -p1
+# 00185  upstream as of Python 3.4.0a4
+%patch186 -p1
+# 00187: upstream as of Python 3.4.0b1
+%patch188 -p1
+
+# 00190: upstream as of Python 3.4.1
+# 00193: upstream as of Python 3.4.1
+%patch194 -p1
+# 00195: upstream as of Python 3.4.2
+%patch196 -p1
+# 00197: upstream as of Python 3.4.2
+%patch199 -p1
+%patch202 -p1
+%patch203 -p1
+%patch204 -p1
+
+%patch209 -p1
+%patch210 -p1
+%patch211 -p1
+%patch212 -p1
+
+# Currently (2010-01-15), http://docs.python.org/library is for 2.6, and there
+# are many differences between 2.6 and the Python 3 library.
+#
+# Fix up the URLs within pydoc to point at the documentation for this
+# MAJOR.MINOR version:
+#
+sed --in-place \
+    --expression="s|http://docs.python.org/library|http://docs.python.org/%{pybasever}/library|g" \
+    Lib/pydoc.py || exit 1
+
+%if ! 0%{regenerate_autotooling_patch}
+# Normally we apply the patch to "configure"
+# We don't apply the patch if we're working towards regenerating it
+%patch5000 -p0 -b .autotool-intermediates
+%endif
+
+# ======================================================
+# Configuring and building the code:
+# ======================================================
+
+%build
+topdir=$(pwd)
+export CFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
+export CXXFLAGS="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
+export CPPFLAGS="`pkg-config --cflags-only-I libffi`"
+export OPT="$RPM_OPT_FLAGS -D_GNU_SOURCE -fPIC -fwrapv"
+export LINKCC="gcc"
+export CFLAGS="$CFLAGS `pkg-config --cflags openssl`"
+export LDFLAGS="$RPM_LD_FLAGS `pkg-config --libs-only-L openssl`"
+
+%if 0%{regenerate_autotooling_patch}
+# If enabled, this code regenerates the patch to "configure", using a
+# local copy of autoconf-2.65, then exits the build
+#
+# The following assumes that the copy is installed to ~/autoconf-2.65/bin
+# as per these instructions:
+#   http://bugs.python.org/issue7997
+
+for f in pyconfig.h.in configure ; do
+    cp $f $f.autotool-intermediates ;
+done
+
+# Rerun the autotools:
+autoreconf
+
+# Regenerate the patch:
+gendiff . .autotool-intermediates > %{PATCH5000}
+
+
+# Exit the build
+exit 1
+%endif
+
+# Define a function, for how to perform a "build" of python for a given
+# configuration:
+BuildPython() {
+  ConfName=$1	      
+  BinaryName=$2
+  SymlinkName=$3
+  ExtraConfigArgs=$4
+  PathFixWithThisBinary=$5
+  MoreCFlags=$6
+
+  ConfDir=build/$ConfName
+
+  echo STARTING: BUILD OF PYTHON FOR CONFIGURATION: $ConfName - %{_bindir}/$BinaryName
+  mkdir -p $ConfDir
+
+  pushd $ConfDir
+
+  # Use the freshly created "configure" script, but in the directory two above:
+  %global _configure $topdir/configure
+
+%configure \
+  --enable-ipv6 \
+  --enable-shared \
+  --with-computed-gotos=%{with_computed_gotos} \
+  --with-dbmliborder=gdbm:ndbm:bdb \
+  --with-system-expat \
+  --with-system-ffi \
+  --enable-loadable-sqlite-extensions \
+%if 0%{?with_systemtap}
+  --with-systemtap \
+%endif
+%if 0%{?with_valgrind}
+  --with-valgrind \
+%endif
+  $ExtraConfigArgs \
+  %{nil}
+
+  # Set EXTRA_CFLAGS to our CFLAGS (rather than overriding OPT, as we've done
+  # in the past).
+  # This should fix a problem with --with-valgrind where it adds
+  #   -DDYNAMIC_ANNOTATIONS_ENABLED=1
+  # to OPT which must be passed to all compilation units in the build,
+  # otherwise leading to linker errors, e.g.
+  #    missing symbol AnnotateRWLockDestroy
+  #
+  # Invoke the build:
+  make EXTRA_CFLAGS="$CFLAGS $MoreCFlags" %{?_smp_mflags}
+
+  popd
+  echo FINISHED: BUILD OF PYTHON FOR CONFIGURATION: $ConfDir
+}
+
+# Use "BuildPython" to support building with different configurations:
+
+%if 0%{?with_debug_build}
+BuildPython debug \
+  python-debug \
+  python%{pybasever}-debug \
+%ifarch %{ix86} x86_64 ppc %{power64}
+  "--with-pydebug --with-tsc --with-count-allocs --with-call-profile --without-ensurepip" \
+%else
+  "--with-pydebug --with-count-allocs --with-call-profile --without-ensurepip" \
+%endif
+  false \
+  -O0
+%endif # with_debug_build
+
+BuildPython optimized \
+  python \
+  python%{pybasever} \
+  "--without-ensurepip" \
+  true
+
+# ======================================================
+# Installing the built code:
+# ======================================================
+
+%install
+topdir=$(pwd)
+rm -fr %{buildroot}
+mkdir -p %{buildroot}%{_prefix} %{buildroot}%{_mandir}
+
+InstallPython() {
+
+  ConfName=$1	      
+  PyInstSoName=$2
+  MoreCFlags=$3
+
+  ConfDir=build/$ConfName
+
+  echo STARTING: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
+  mkdir -p $ConfDir
+
+  pushd $ConfDir
+
+make install DESTDIR=%{buildroot} INSTALL="install -p" EXTRA_CFLAGS="$MoreCFlags"
+
+  popd
+
+  # We install a collection of hooks for gdb that make it easier to debug
+  # executables linked against libpython3* (such as /usr/bin/python3 itself)
+  #
+  # These hooks are implemented in Python itself (though they are for the version
+  # of python that gdb is linked with, in this case Python 2.7)
+  #
+  # gdb-archer looks for them in the same path as the ELF file, with a -gdb.py suffix.
+  # We put them in the debuginfo package by installing them to e.g.:
+  #  /usr/lib/debug/usr/lib/libpython3.2.so.1.0.debug-gdb.py
+  #
+  # See https://fedoraproject.org/wiki/Features/EasierPythonDebugging for more
+  # information
+  #
+  # Copy up the gdb hooks into place; the python file will be autoloaded by gdb
+  # when visiting libpython.so, provided that the python file is installed to the
+  # same path as the library (or its .debug file) plus a "-gdb.py" suffix, e.g:
+  #  /usr/lib/debug/usr/lib64/libpython3.2.so.1.0.debug-gdb.py
+  # (note that the debug path is /usr/lib/debug for both 32/64 bit)
+  #
+  # Initially I tried:
+  #  /usr/lib/libpython3.1.so.1.0-gdb.py
+  # but doing so generated noise when ldconfig was rerun (rhbz:562980)
+  #
+%if 0%{?with_gdb_hooks}
+  DirHoldingGdbPy=%{_prefix}/lib/debug/%{_libdir}
+  PathOfGdbPy=$DirHoldingGdbPy/$PyInstSoName.debug-gdb.py
+
+  mkdir -p %{buildroot}$DirHoldingGdbPy
+  cp Tools/gdb/libpython.py %{buildroot}$PathOfGdbPy
+%endif # with_gdb_hooks
+
+  echo FINISHED: INSTALL OF PYTHON FOR CONFIGURATION: $ConfName
+}
+
+# Use "InstallPython" to support building with different configurations:
+
+# Install the "debug" build first, so that we can move some files aside
+%if 0%{?with_debug_build}
+InstallPython debug \
+  %{py_INSTSONAME_debug} \
+  -O0
+%endif # with_debug_build
+
+# Now the optimized build:
+InstallPython optimized \
+  %{py_INSTSONAME_optimized}
+
+install -d -m 0755 ${RPM_BUILD_ROOT}%{pylibdir}/site-packages/__pycache__
+
+mv ${RPM_BUILD_ROOT}%{_bindir}/2to3 ${RPM_BUILD_ROOT}%{_bindir}/python3-2to3
+
+# Development tools
+install -m755 -d ${RPM_BUILD_ROOT}%{pylibdir}/Tools
+install Tools/README ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
+cp -ar Tools/freeze ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
+cp -ar Tools/i18n ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
+cp -ar Tools/pynche ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
+cp -ar Tools/scripts ${RPM_BUILD_ROOT}%{pylibdir}/Tools/
+
+# Documentation tools
+install -m755 -d %{buildroot}%{pylibdir}/Doc
+cp -ar Doc/tools %{buildroot}%{pylibdir}/Doc/
+
+# Demo scripts
+cp -ar Tools/demo %{buildroot}%{pylibdir}/Tools/
+
+# Fix for bug #136654
+rm -f %{buildroot}%{pylibdir}/email/test/data/audiotest.au %{buildroot}%{pylibdir}/test/audiotest.au
+
+%if "%{_lib}" == "lib64"
+install -d -m 0755 %{buildroot}/%{_prefix}/lib/python%{pybasever}/site-packages/__pycache__
+%endif
+
+# Make python3-devel multilib-ready (bug #192747, #139911)
+%global _pyconfig32_h pyconfig-32.h
+%global _pyconfig64_h pyconfig-64.h
+
+%ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64
+%global _pyconfig_h %{_pyconfig64_h}
+%else
+%global _pyconfig_h %{_pyconfig32_h}
+%endif
+
+# ABIFLAGS, LDVERSION and SOABI are in the upstream Makefile
+%global ABIFLAGS_optimized m
+%global ABIFLAGS_debug     dm
+
+%global LDVERSION_optimized %{pybasever}%{ABIFLAGS_optimized}
+%global LDVERSION_debug     %{pybasever}%{ABIFLAGS_debug}
+
+%global SOABI_optimized cpython-%{pyshortver}%{ABIFLAGS_optimized}
+%global SOABI_debug     cpython-%{pyshortver}%{ABIFLAGS_debug}
+
+%if 0%{?with_debug_build}
+%global PyIncludeDirs python%{LDVERSION_optimized} python%{LDVERSION_debug}
+
+%else
+%global PyIncludeDirs python%{LDVERSION_optimized}
+%endif
+
+for PyIncludeDir in %{PyIncludeDirs} ; do
+  mv %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h \
+     %{buildroot}%{_includedir}/$PyIncludeDir/%{_pyconfig_h}
+  cat > %{buildroot}%{_includedir}/$PyIncludeDir/pyconfig.h << EOF
+#include <bits/wordsize.h>
+
+#if __WORDSIZE == 32
+#include "%{_pyconfig32_h}"
+#elif __WORDSIZE == 64
+#include "%{_pyconfig64_h}"
+#else
+#error "Unknown word size"
+#endif
+EOF
+done
+
+# Fix for bug 201434: make sure distutils looks at the right pyconfig.h file
+# Similar for sysconfig: sysconfig.get_config_h_filename tries to locate
+# pyconfig.h so it can be parsed, and needs to do this at runtime in site.py
+# when python starts up (bug 653058)
+#
+# Split this out so it goes directly to the pyconfig-32.h/pyconfig-64.h
+# variants:
+sed -i -e "s/'pyconfig.h'/'%{_pyconfig_h}'/" \
+  %{buildroot}%{pylibdir}/distutils/sysconfig.py \
+  %{buildroot}%{pylibdir}/sysconfig.py
+
+# Switch all shebangs to refer to the specific Python version.
+LD_LIBRARY_PATH=./build/optimized ./build/optimized/python \
+  Tools/scripts/pathfix.py \
+  -i "%{_bindir}/python%{pybasever}" \
+  %{buildroot}
+
+# Remove shebang lines from .py files that aren't executable, and
+# remove executability from .py files that don't have a shebang line:
+find %{buildroot} -name \*.py \
+  \( \( \! -perm /u+x,g+x,o+x -exec sed -e '/^#!/Q 0' -e 'Q 1' {} \; \
+  -print -exec sed -i '1d' {} \; \) -o \( \
+  -perm /u+x,g+x,o+x ! -exec grep -m 1 -q '^#!' {} \; \
+  -exec chmod a-x {} \; \) \)
+
+# .xpm and .xbm files should not be executable:
+find %{buildroot} \
+  \( -name \*.xbm -o -name \*.xpm -o -name \*.xpm.1 \) \
+  -exec chmod a-x {} \;
+
+# Remove executable flag from files that shouldn't have it:
+chmod a-x \
+  %{buildroot}%{pylibdir}/distutils/tests/Setup.sample \
+  %{buildroot}%{pylibdir}/Tools/README
+
+# Get rid of DOS batch files:
+find %{buildroot} -name \*.bat -exec rm {} \;
+
+# Get rid of backup files:
+find %{buildroot}/ -name "*~" -exec rm -f {} \;
+find . -name "*~" -exec rm -f {} \;
+rm -f %{buildroot}%{pylibdir}/LICENSE.txt
+# Junk, no point in putting in -test sub-pkg
+rm -f ${RPM_BUILD_ROOT}/%{pylibdir}/idlelib/testcode.py*
+
+# Get rid of stray patch file from buildroot:
+rm -f %{buildroot}%{pylibdir}/test/test_imp.py.apply-our-changes-to-expected-shebang # from patch 4
+
+# Fix end-of-line encodings:
+find %{buildroot}/ -name \*.py -exec sed -i 's/\r//' {} \;
+
+# Fix an encoding:
+iconv -f iso8859-1 -t utf-8 %{buildroot}/%{pylibdir}/Demo/rpc/README > README.conv && mv -f README.conv %{buildroot}/%{pylibdir}/Demo/rpc/README
+
+# Note that 
+#  %{pylibdir}/Demo/distutils/test2to3/setup.py
+# is in iso-8859-1 encoding, and that this is deliberate; this is test data
+# for the 2to3 tool, and one of the functions of the 2to3 tool is to fixup
+# character encodings within python source code
+
+# Do bytecompilation with the newly installed interpreter.
+# This is similar to the script in macros.pybytecompile
+# compile *.pyo
+find %{buildroot} -type f -a -name "*.py" -print0 | \
+    LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
+    PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
+    xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2]) for f in sys.argv[1:]]' || :
+# compile *.pyc
+find %{buildroot} -type f -a -name "*.py" -print0 | \
+    LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
+    PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
+    xargs -0 %{buildroot}%{_bindir}/python%{pybasever} -O -c 'import py_compile, sys; [py_compile.compile(f, dfile=f.partition("%{buildroot}")[2], optimize=0) for f in sys.argv[1:]]' || :
+
+# Fixup permissions for shared libraries from non-standard 555 to standard 755:
+find %{buildroot} \
+    -perm 555 -exec chmod 755 {} \;
+
+# Install macros for rpm:
+mkdir -p %{buildroot}/%{_rpmconfigdir}/macros.d/
+install -m 644 %{SOURCE3} %{buildroot}/%{_rpmconfigdir}/macros.d/
+
+# Ensure that the curses module was linked against libncursesw.so, rather than
+# libncurses.so (bug 539917)
+ldd %{buildroot}/%{dynload_dir}/_curses*.so \
+    | grep curses \
+    | grep libncurses.so && (echo "_curses.so linked against libncurses.so" ; exit 1)
+
+# Ensure that the debug modules are linked against the debug libpython, and
+# likewise for the optimized modules and libpython:
+for Module in %{buildroot}/%{dynload_dir}/*.so ; do
+    case $Module in
+    *.%{SOABI_debug})
+        ldd $Module | grep %{py_INSTSONAME_optimized} &&
+            (echo Debug module $Module linked against optimized %{py_INSTSONAME_optimized} ; exit 1)
+            
+        ;;
+    *.%{SOABI_optimized})
+        ldd $Module | grep %{py_INSTSONAME_debug} &&
+            (echo Optimized module $Module linked against debug %{py_INSTSONAME_debug} ; exit 1)
+        ;;
+    esac
+done
+
+# Create "/usr/bin/python3-debug", a symlink to the python3 debug binary, to
+# avoid the user having to know the precise version and ABI flags.  (see
+# e.g. rhbz#676748):
+%if 0%{?with_debug_build}
+ln -s \
+  %{_bindir}/python%{LDVERSION_debug} \
+  %{buildroot}%{_bindir}/python3-debug
+%endif
+
+#
+# Systemtap hooks:
+#
+%if 0%{?with_systemtap}
+# Install a tapset for this libpython into tapsetdir, fixing up the path to the
+# library:
+mkdir -p %{buildroot}%{tapsetdir}
+%ifarch %{power64} s390x x86_64 ia64 alpha sparc64 aarch64
+%global libpython_stp_optimized libpython%{pybasever}-64.stp
+%global libpython_stp_debug     libpython%{pybasever}-debug-64.stp
+%else
+%global libpython_stp_optimized libpython%{pybasever}-32.stp
+%global libpython_stp_debug     libpython%{pybasever}-debug-32.stp
+%endif
+
+sed \
+   -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_optimized}|" \
+   %{_sourcedir}/libpython.stp \
+   > %{buildroot}%{tapsetdir}/%{libpython_stp_optimized}
+
+%if 0%{?with_debug_build}
+# In Python 3, python3 and python3-debug don't point to the same binary,
+# so we have to replace "python3" with "python3-debug" to get systemtap
+# working with debug build
+sed \
+   -e "s|LIBRARY_PATH|%{_libdir}/%{py_INSTSONAME_debug}|" \
+   -e 's|"python3"|"python3-debug"|' \
+   %{_sourcedir}/libpython.stp \
+   > %{buildroot}%{tapsetdir}/%{libpython_stp_debug}
+%endif # with_debug_build
+
+%endif # with_systemtap
+
+# Rename the script that differs on different arches to arch specific name
+mv %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-{,`uname -m`-}config
+echo -e '#!/bin/sh\nexec `dirname $0`/python%{LDVERSION_optimized}-`uname -m`-config "$@"' > \
+  %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config
+echo '[ $? -eq 127 ] && echo "Could not find python%{LDVERSION_optimized}-`uname -m`-config. Look around to see available arches." >&2' >> \
+  %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config
+  chmod +x %{buildroot}%{_bindir}/python%{LDVERSION_optimized}-config
+
+# ======================================================
+# Running the upstream test suite
+# ======================================================
+
+%check
+
+# first of all, check timestamps of bytecode files
+find %{buildroot} -type f -a -name "*.py" -print0 | \
+    LD_LIBRARY_PATH="%{buildroot}%{dynload_dir}/:%{buildroot}%{_libdir}" \
+    PYTHONPATH="%{buildroot}%{_libdir}/python%{pybasever} %{buildroot}%{_libdir}/python%{pybasever}/site-packages" \
+    xargs -0 %{buildroot}%{_bindir}/python%{pybasever} %{SOURCE8}
+
+
+topdir=$(pwd)
+CheckPython() {
+  ConfName=$1	      
+  ConfDir=$(pwd)/build/$ConfName
+
+  echo STARTING: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName
+
+  # Note that we're running the tests using the version of the code in the
+  # builddir, not in the buildroot.
+
+  # Run the upstream test suite, setting "WITHIN_PYTHON_RPM_BUILD" so that the
+  # our non-standard decorators take effect on the relevant tests:
+  #   @unittest._skipInRpmBuild(reason)
+  #   @unittest._expectedFailureInRpmBuild
+  # test_faulthandler.test_register_chain currently fails on ppc64le and
+  #   aarch64, see upstream bug http://bugs.python.org/issue21131
+  WITHIN_PYTHON_RPM_BUILD= \
+  LD_LIBRARY_PATH=$ConfDir $ConfDir/python -m test.regrtest \
+    --verbose --findleaks \
+    -x test_distutils \
+    %ifarch ppc64le aarch64
+    -x test_faulthandler \
+    %endif
+    %ifarch %{power64} s390 s390x armv7hl aarch64
+    -x test_gdb
+    %endif
+
+  echo FINISHED: CHECKING OF PYTHON FOR CONFIGURATION: $ConfName
+
+}
+
+%if 0%{run_selftest_suite}
+
+# Check each of the configurations:
+%if 0%{?with_debug_build}
+CheckPython debug
+%endif # with_debug_build
+CheckPython optimized
+
+%endif # run_selftest_suite
+
+
+# ======================================================
+# Cleaning up
+# ======================================================
+
+%clean
+rm -fr %{buildroot}
+
+
+# ======================================================
+# Scriptlets
+# ======================================================
+
+%post libs -p /sbin/ldconfig
+
+%postun libs -p /sbin/ldconfig
+
+
+
+%files
+%defattr(-, root, root)
+%doc LICENSE README
+%{_bindir}/pydoc*
+%{_bindir}/python3
+%{_bindir}/python%{pybasever}
+%{_bindir}/python%{pybasever}m
+%{_bindir}/pyvenv
+%{_bindir}/pyvenv-%{pybasever}
+%{_mandir}/*/*
+
+%files libs
+%defattr(-,root,root,-)
+%doc LICENSE README
+%dir %{pylibdir}
+%dir %{dynload_dir}
+%{dynload_dir}/_bisect.%{SOABI_optimized}.so
+%{dynload_dir}/_bz2.%{SOABI_optimized}.so
+%{dynload_dir}/_codecs_cn.%{SOABI_optimized}.so
+%{dynload_dir}/_codecs_hk.%{SOABI_optimized}.so
+%{dynload_dir}/_codecs_iso2022.%{SOABI_optimized}.so
+%{dynload_dir}/_codecs_jp.%{SOABI_optimized}.so
+%{dynload_dir}/_codecs_kr.%{SOABI_optimized}.so
+%{dynload_dir}/_codecs_tw.%{SOABI_optimized}.so
+%{dynload_dir}/_crypt.%{SOABI_optimized}.so
+%{dynload_dir}/_csv.%{SOABI_optimized}.so
+%{dynload_dir}/_ctypes.%{SOABI_optimized}.so
+%{dynload_dir}/_curses.%{SOABI_optimized}.so
+%{dynload_dir}/_curses_panel.%{SOABI_optimized}.so
+%{dynload_dir}/_dbm.%{SOABI_optimized}.so
+%{dynload_dir}/_decimal.%{SOABI_optimized}.so
+%{dynload_dir}/_elementtree.%{SOABI_optimized}.so
+%if %{with_gdbm}
+%{dynload_dir}/_gdbm.%{SOABI_optimized}.so
+%endif
+%{dynload_dir}/_hashlib.%{SOABI_optimized}.so
+%{dynload_dir}/_heapq.%{SOABI_optimized}.so
+%{dynload_dir}/_json.%{SOABI_optimized}.so
+%{dynload_dir}/_lsprof.%{SOABI_optimized}.so
+%{dynload_dir}/_lzma.%{SOABI_optimized}.so
+%{dynload_dir}/_multibytecodec.%{SOABI_optimized}.so
+%{dynload_dir}/_multiprocessing.%{SOABI_optimized}.so
+%{dynload_dir}/_opcode.%{SOABI_optimized}.so
+%{dynload_dir}/_pickle.%{SOABI_optimized}.so
+%{dynload_dir}/_posixsubprocess.%{SOABI_optimized}.so
+%{dynload_dir}/_random.%{SOABI_optimized}.so
+%{dynload_dir}/_socket.%{SOABI_optimized}.so
+%{dynload_dir}/_sqlite3.%{SOABI_optimized}.so
+%{dynload_dir}/_ssl.%{SOABI_optimized}.so
+%{dynload_dir}/_struct.%{SOABI_optimized}.so
+%{dynload_dir}/array.%{SOABI_optimized}.so
+%{dynload_dir}/audioop.%{SOABI_optimized}.so
+%{dynload_dir}/binascii.%{SOABI_optimized}.so
+%{dynload_dir}/cmath.%{SOABI_optimized}.so
+%{dynload_dir}/_datetime.%{SOABI_optimized}.so
+%{dynload_dir}/fcntl.%{SOABI_optimized}.so
+%{dynload_dir}/grp.%{SOABI_optimized}.so
+%{dynload_dir}/math.%{SOABI_optimized}.so
+%{dynload_dir}/mmap.%{SOABI_optimized}.so
+%{dynload_dir}/nis.%{SOABI_optimized}.so
+%{dynload_dir}/ossaudiodev.%{SOABI_optimized}.so
+%{dynload_dir}/parser.%{SOABI_optimized}.so
+%{dynload_dir}/pyexpat.%{SOABI_optimized}.so
+%{dynload_dir}/readline.%{SOABI_optimized}.so
+%{dynload_dir}/resource.%{SOABI_optimized}.so
+%{dynload_dir}/select.%{SOABI_optimized}.so
+%{dynload_dir}/spwd.%{SOABI_optimized}.so
+%{dynload_dir}/syslog.%{SOABI_optimized}.so
+%{dynload_dir}/termios.%{SOABI_optimized}.so
+%{dynload_dir}/time.%{SOABI_optimized}.so
+%{dynload_dir}/unicodedata.%{SOABI_optimized}.so
+%{dynload_dir}/xxlimited.%{SOABI_optimized}.so
+%{dynload_dir}/zlib.%{SOABI_optimized}.so
+
+%dir %{pylibdir}/site-packages/
+%dir %{pylibdir}/site-packages/__pycache__/
+%{pylibdir}/site-packages/README
+%{pylibdir}/*.py
+%dir %{pylibdir}/__pycache__/
+%{pylibdir}/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/asyncio/
+%dir %{pylibdir}/asyncio/__pycache__/
+%{pylibdir}/asyncio/*.py
+%{pylibdir}/asyncio/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/collections/
+%dir %{pylibdir}/collections/__pycache__/
+%{pylibdir}/collections/*.py
+%{pylibdir}/collections/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/concurrent/
+%dir %{pylibdir}/concurrent/__pycache__/
+%{pylibdir}/concurrent/*.py
+%{pylibdir}/concurrent/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/concurrent/futures/
+%dir %{pylibdir}/concurrent/futures/__pycache__/
+%{pylibdir}/concurrent/futures/*.py
+%{pylibdir}/concurrent/futures/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/ctypes/
+%dir %{pylibdir}/ctypes/__pycache__/
+%{pylibdir}/ctypes/*.py
+%{pylibdir}/ctypes/__pycache__/*%{bytecode_suffixes}
+%{pylibdir}/ctypes/macholib
+
+%{pylibdir}/curses
+
+%dir %{pylibdir}/dbm/
+%dir %{pylibdir}/dbm/__pycache__/
+%{pylibdir}/dbm/*.py
+%{pylibdir}/dbm/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/distutils/
+%dir %{pylibdir}/distutils/__pycache__/
+%{pylibdir}/distutils/*.py
+%{pylibdir}/distutils/__pycache__/*%{bytecode_suffixes}
+%{pylibdir}/distutils/README
+%{pylibdir}/distutils/command
+
+%dir %{pylibdir}/email/
+%dir %{pylibdir}/email/__pycache__/
+%{pylibdir}/email/*.py
+%{pylibdir}/email/__pycache__/*%{bytecode_suffixes}
+%{pylibdir}/email/mime
+%doc %{pylibdir}/email/architecture.rst
+
+%{pylibdir}/encodings
+
+%dir %{pylibdir}/ensurepip/
+%dir %{pylibdir}/ensurepip/__pycache__/
+%{pylibdir}/ensurepip/*.py
+%{pylibdir}/ensurepip/__pycache__/*%{bytecode_suffixes}
+%exclude %{pylibdir}/ensurepip/_bundled
+
+%{pylibdir}/html
+%{pylibdir}/http
+%{pylibdir}/idlelib
+
+%dir %{pylibdir}/importlib/
+%dir %{pylibdir}/importlib/__pycache__/
+%{pylibdir}/importlib/*.py
+%{pylibdir}/importlib/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/json/
+%dir %{pylibdir}/json/__pycache__/
+%{pylibdir}/json/*.py
+%{pylibdir}/json/__pycache__/*%{bytecode_suffixes}
+
+%{pylibdir}/lib2to3
+%exclude %{pylibdir}/lib2to3/tests
+%{pylibdir}/logging
+%{pylibdir}/multiprocessing
+%{pylibdir}/plat-linux
+%{pylibdir}/pydoc_data
+
+%dir %{pylibdir}/sqlite3/
+%dir %{pylibdir}/sqlite3/__pycache__/
+%{pylibdir}/sqlite3/*.py
+%{pylibdir}/sqlite3/__pycache__/*%{bytecode_suffixes}
+
+%dir %{pylibdir}/test/
+%dir %{pylibdir}/test/__pycache__/
+%dir %{pylibdir}/test/support/
+%dir %{pylibdir}/test/support/__pycache__/
+%{pylibdir}/test/__init__.py
+%{pylibdir}/test/__pycache__/__init__%{bytecode_suffixes}
+%{pylibdir}/test/support/__init__.py
+%{pylibdir}/test/support/__pycache__/__init__%{bytecode_suffixes}
+
+%exclude %{pylibdir}/turtle.py
+%exclude %{pylibdir}/__pycache__/turtle*%{bytecode_suffixes}
+
+%dir %{pylibdir}/unittest/
+%dir %{pylibdir}/unittest/__pycache__/
+%{pylibdir}/unittest/*.py
+%{pylibdir}/unittest/__pycache__/*%{bytecode_suffixes}
+
+%{pylibdir}/urllib
+
+%dir %{pylibdir}/venv/
+%dir %{pylibdir}/venv/__pycache__/
+%{pylibdir}/venv/*.py
+%{pylibdir}/venv/__pycache__/*%{bytecode_suffixes}
+%{pylibdir}/venv/scripts
+
+%{pylibdir}/wsgiref
+%{pylibdir}/xml
+%{pylibdir}/xmlrpc
+
+%if "%{_lib}" == "lib64"
+%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}
+%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages
+%attr(0755,root,root) %dir %{_prefix}/lib/python%{pybasever}/site-packages/__pycache__/
+%endif
+
+# "Makefile" and the config-32/64.h file are needed by
+# distutils/sysconfig.py:_init_posix(), so we include them in the core
+# package, along with their parent directories (bug 531901):
+%dir %{pylibdir}/config-%{LDVERSION_optimized}/
+%{pylibdir}/config-%{LDVERSION_optimized}/Makefile
+%dir %{_includedir}/python%{LDVERSION_optimized}/
+%{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h}
+
+%{_libdir}/%{py_INSTSONAME_optimized}
+%{_libdir}/libpython3.so
+%if 0%{?with_systemtap}
+%dir %(dirname %{tapsetdir})
+%dir %{tapsetdir}
+%{tapsetdir}/%{libpython_stp_optimized}
+%doc systemtap-example.stp pyfuntop.stp
+%endif
+
+%files devel
+%defattr(-,root,root)
+%{pylibdir}/config-%{LDVERSION_optimized}/*
+%exclude %{pylibdir}/config-%{LDVERSION_optimized}/Makefile
+%{_includedir}/python%{LDVERSION_optimized}/*.h
+%exclude %{_includedir}/python%{LDVERSION_optimized}/%{_pyconfig_h}
+%doc Misc/README.valgrind Misc/valgrind-python.supp Misc/gdbinit
+%{_bindir}/python3-config
+%{_bindir}/python%{pybasever}-config
+%{_bindir}/python%{LDVERSION_optimized}-config
+%{_bindir}/python%{LDVERSION_optimized}-*-config
+%{_libdir}/libpython%{LDVERSION_optimized}.so
+%{_libdir}/pkgconfig/python-%{LDVERSION_optimized}.pc
+%{_libdir}/pkgconfig/python-%{pybasever}.pc
+%{_libdir}/pkgconfig/python3.pc
+%{_rpmconfigdir}/macros.d/macros.pybytecompile%{pybasever}
+
+%files tools
+%defattr(-,root,root,755)
+%{_bindir}/python3-2to3
+%{_bindir}/2to3-%{pybasever}
+%{_bindir}/idle*
+%{pylibdir}/Tools
+%doc %{pylibdir}/Doc
+
+%files tkinter
+%defattr(-,root,root,755)
+%{pylibdir}/tkinter
+%exclude %{pylibdir}/tkinter/test
+%{dynload_dir}/_tkinter.%{SOABI_optimized}.so
+%{pylibdir}/turtle.py
+%{pylibdir}/__pycache__/turtle*%{bytecode_suffixes}
+%dir %{pylibdir}/turtledemo
+%{pylibdir}/turtledemo/*.py
+%{pylibdir}/turtledemo/*.cfg
+%dir %{pylibdir}/turtledemo/__pycache__/
+%{pylibdir}/turtledemo/__pycache__/*%{bytecode_suffixes}
+
+%files test
+%defattr(-, root, root)
+%{pylibdir}/ctypes/test
+%{pylibdir}/distutils/tests
+%{pylibdir}/sqlite3/test
+%{pylibdir}/test
+%{dynload_dir}/_ctypes_test.%{SOABI_optimized}.so
+%{dynload_dir}/_testbuffer.%{SOABI_optimized}.so
+%{dynload_dir}/_testcapi.%{SOABI_optimized}.so
+%{dynload_dir}/_testimportmultiple.%{SOABI_optimized}.so
+%{pylibdir}/lib2to3/tests
+%{pylibdir}/tkinter/test
+%{pylibdir}/unittest/test
+
+
+# We don't bother splitting the debug build out into further subpackages:
+# if you need it, you're probably a developer.
+
+# Hence the manifest is the combination of analogous files in the manifests of
+# all of the other subpackages
+
+%if 0%{?with_debug_build}
+%files debug
+%defattr(-,root,root,-)
+
+# Analog of the core subpackage's files:
+%{_bindir}/python%{LDVERSION_debug}
+%{_bindir}/python3-debug
+
+# Analog of the -libs subpackage's files:
+# ...with debug builds of the built-in "extension" modules:
+%{dynload_dir}/_bisect.%{SOABI_debug}.so
+%{dynload_dir}/_bz2.%{SOABI_debug}.so
+%{dynload_dir}/_codecs_cn.%{SOABI_debug}.so
+%{dynload_dir}/_codecs_hk.%{SOABI_debug}.so
+%{dynload_dir}/_codecs_iso2022.%{SOABI_debug}.so
+%{dynload_dir}/_codecs_jp.%{SOABI_debug}.so
+%{dynload_dir}/_codecs_kr.%{SOABI_debug}.so
+%{dynload_dir}/_codecs_tw.%{SOABI_debug}.so
+%{dynload_dir}/_crypt.%{SOABI_debug}.so
+%{dynload_dir}/_csv.%{SOABI_debug}.so
+%{dynload_dir}/_ctypes.%{SOABI_debug}.so
+%{dynload_dir}/_curses.%{SOABI_debug}.so
+%{dynload_dir}/_curses_panel.%{SOABI_debug}.so
+%{dynload_dir}/_dbm.%{SOABI_debug}.so
+%{dynload_dir}/_decimal.%{SOABI_debug}.so
+%{dynload_dir}/_elementtree.%{SOABI_debug}.so
+%if %{with_gdbm}
+%{dynload_dir}/_gdbm.%{SOABI_debug}.so
+%endif
+%{dynload_dir}/_hashlib.%{SOABI_debug}.so
+%{dynload_dir}/_heapq.%{SOABI_debug}.so
+%{dynload_dir}/_json.%{SOABI_debug}.so
+%{dynload_dir}/_lsprof.%{SOABI_debug}.so
+%{dynload_dir}/_lzma.%{SOABI_debug}.so
+%{dynload_dir}/_multibytecodec.%{SOABI_debug}.so
+%{dynload_dir}/_multiprocessing.%{SOABI_debug}.so
+%{dynload_dir}/_opcode.%{SOABI_debug}.so
+%{dynload_dir}/_pickle.%{SOABI_debug}.so
+%{dynload_dir}/_posixsubprocess.%{SOABI_debug}.so
+%{dynload_dir}/_random.%{SOABI_debug}.so
+%{dynload_dir}/_socket.%{SOABI_debug}.so
+%{dynload_dir}/_sqlite3.%{SOABI_debug}.so
+%{dynload_dir}/_ssl.%{SOABI_debug}.so
+%{dynload_dir}/_struct.%{SOABI_debug}.so
+%{dynload_dir}/array.%{SOABI_debug}.so
+%{dynload_dir}/audioop.%{SOABI_debug}.so
+%{dynload_dir}/binascii.%{SOABI_debug}.so
+%{dynload_dir}/cmath.%{SOABI_debug}.so
+%{dynload_dir}/_datetime.%{SOABI_debug}.so
+%{dynload_dir}/fcntl.%{SOABI_debug}.so
+%{dynload_dir}/grp.%{SOABI_debug}.so
+%{dynload_dir}/math.%{SOABI_debug}.so
+%{dynload_dir}/mmap.%{SOABI_debug}.so
+%{dynload_dir}/nis.%{SOABI_debug}.so
+%{dynload_dir}/ossaudiodev.%{SOABI_debug}.so
+%{dynload_dir}/parser.%{SOABI_debug}.so
+%{dynload_dir}/pyexpat.%{SOABI_debug}.so
+%{dynload_dir}/readline.%{SOABI_debug}.so
+%{dynload_dir}/resource.%{SOABI_debug}.so
+%{dynload_dir}/select.%{SOABI_debug}.so
+%{dynload_dir}/spwd.%{SOABI_debug}.so
+%{dynload_dir}/syslog.%{SOABI_debug}.so
+%{dynload_dir}/termios.%{SOABI_debug}.so
+%{dynload_dir}/time.%{SOABI_debug}.so
+%{dynload_dir}/unicodedata.%{SOABI_debug}.so
+%{dynload_dir}/zlib.%{SOABI_debug}.so
+
+# No need to split things out the "Makefile" and the config-32/64.h file as we
+# do for the regular build above (bug 531901), since they're all in one package
+# now; they're listed below, under "-devel":
+
+%{_libdir}/%{py_INSTSONAME_debug}
+%if 0%{?with_systemtap}
+%dir %(dirname %{tapsetdir})
+%dir %{tapsetdir}
+%{tapsetdir}/%{libpython_stp_debug}
+%endif
+
+# Analog of the -devel subpackage's files:
+%{pylibdir}/config-%{LDVERSION_debug}
+%{_includedir}/python%{LDVERSION_debug}
+%{_bindir}/python%{LDVERSION_debug}-config
+%{_libdir}/libpython%{LDVERSION_debug}.so
+%{_libdir}/pkgconfig/python-%{LDVERSION_debug}.pc
+
+# Analog of the -tools subpackage's files:
+#  None for now; we could build precanned versions that have the appropriate
+# shebang if needed
+
+# Analog  of the tkinter subpackage's files:
+%{dynload_dir}/_tkinter.%{SOABI_debug}.so
+
+# Analog  of the -test subpackage's files:
+%{dynload_dir}/_ctypes_test.%{SOABI_debug}.so
+%{dynload_dir}/_testbuffer.%{SOABI_debug}.so
+%{dynload_dir}/_testcapi.%{SOABI_debug}.so
+%{dynload_dir}/_testimportmultiple.%{SOABI_debug}.so
+
+%endif # with_debug_build
+
+# We put the debug-gdb.py file inside /usr/lib/debug to avoid noise from
+# ldconfig (rhbz:562980).
+# 
+# The /usr/lib/rpm/redhat/macros defines %__debug_package to use
+# debugfiles.list, and it appears that everything below /usr/lib/debug and
+# (/usr/src/debug) gets added to this file (via LISTFILES) in
+# /usr/lib/rpm/find-debuginfo.sh
+# 
+# Hence by installing it below /usr/lib/debug we ensure it is added to the
+# -debuginfo subpackage
+# (if it doesn't, then the rpmbuild ought to fail since the debug-gdb.py 
+# payload file would be unpackaged)
+
+
+# ======================================================
+# Finally, the changelog:
+# ======================================================
+
+%changelog
+* Thu Aug 11 2016 Miro Hrončok <mhroncok@redhat.com> - 3.4.3-11
+- Imported from F23