path: root/qcom-display-iommu.patch

From patchwork Thu Jul 13 12:07:44 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [RESEND,1/4] Docs: dt: document qcom iommu bindings
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9838369
Message-Id: <20170713120747.20490-2-robdclark@gmail.com>
To: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org, Archit Taneja <architt@codeaurora.org>,
 Rob Herring <robh@kernel.org>, Will Deacon <will.deacon@arm.com>,
 Sricharan <sricharan@codeaurora.org>,
 Mark Rutland <mark.rutland@arm.com>, Robin Murphy <robin.murphy@arm.com>,
 Rob Clark <robdclark@gmail.com>, devicetree@vger.kernel.org
Date: Thu, 13 Jul 2017 08:07:44 -0400

Cc: devicetree@vger.kernel.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Rob Herring <robh@kernel.org>
---
 .../devicetree/bindings/iommu/qcom,iommu.txt       | 121 +++++++++++++++++++++
 1 file changed, 121 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iommu/qcom,iommu.txt

diff --git a/Documentation/devicetree/bindings/iommu/qcom,iommu.txt b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
new file mode 100644
index 000000000000..b2641ceb2b40
--- /dev/null
+++ b/Documentation/devicetree/bindings/iommu/qcom,iommu.txt
@@ -0,0 +1,121 @@
+* QCOM IOMMU v1 Implementation
+
+Qualcomm "B" family devices which are not compatible with arm-smmu have
+a similar looking IOMMU but without access to the global register space,
+and optionally requiring additional configuration to route context irqs
+to non-secure vs secure interrupt line.
+
+** Required properties:
+
+- compatible       : Should be one of:
+
+                        "qcom,msm8916-iommu"
+
+                     Followed by "qcom,msm-iommu-v1".
+
+- clock-names      : Should be a pair of "iface" (required for IOMMUs
+                     register group access) and "bus" (required for
+                     the IOMMUs underlying bus access).
+
+- clocks           : Phandles for respective clocks described by
+                     clock-names.
+
+- #address-cells   : must be 1.
+
+- #size-cells      : must be 1.
+
+- #iommu-cells     : Must be 1.  Index identifies the context-bank #.
+
+- ranges           : Base address and size of the iommu context banks.
+
+- qcom,iommu-secure-id  : secure-id.
+
+- List of sub-nodes, one per translation context bank.  Each sub-node
+  has the following required properties:
+
+  - compatible     : Should be one of:
+        - "qcom,msm-iommu-v1-ns"  : non-secure context bank
+        - "qcom,msm-iommu-v1-sec" : secure context bank
+  - reg            : Base address and size of context bank within the iommu
+  - interrupts     : The context fault irq.
+
+** Optional properties:
+
+- reg              : Base address and size of the SMMU local base, should
+                     be only specified if the iommu requires configuration
+                     for routing of context bank irq's to secure vs non-
+                     secure lines.  (Ie. if the iommu contains secure
+                     context banks)
+
+
+** Examples:
+
+	apps_iommu: iommu@1e20000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#iommu-cells = <1>;
+		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+		ranges = <0 0x1e20000 0x40000>;
+		reg = <0x1ef0000 0x3000>;
+		clocks = <&gcc GCC_SMMU_CFG_CLK>,
+			 <&gcc GCC_APSS_TCU_CLK>;
+		clock-names = "iface", "bus";
+		qcom,iommu-secure-id = <17>;
+
+		// mdp_0:
+		iommu-ctx@4000 {
+			compatible = "qcom,msm-iommu-v1-ns";
+			reg = <0x4000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		// venus_ns:
+		iommu-ctx@5000 {
+			compatible = "qcom,msm-iommu-v1-sec";
+			reg = <0x5000 0x1000>;
+			interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	gpu_iommu: iommu@1f08000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		#iommu-cells = <1>;
+		compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+		ranges = <0 0x1f08000 0x10000>;
+		clocks = <&gcc GCC_SMMU_CFG_CLK>,
+			 <&gcc GCC_GFX_TCU_CLK>;
+		clock-names = "iface", "bus";
+		qcom,iommu-secure-id = <18>;
+
+		// gfx3d_user:
+		iommu-ctx@1000 {
+			compatible = "qcom,msm-iommu-v1-ns";
+			reg = <0x1000 0x1000>;
+			interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+		};
+
+		// gfx3d_priv:
+		iommu-ctx@2000 {
+			compatible = "qcom,msm-iommu-v1-ns";
+			reg = <0x2000 0x1000>;
+			interrupts = <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>;
+		};
+	};
+
+	...
+
+	venus: video-codec@1d00000 {
+		...
+		iommus = <&apps_iommu 5>;
+	};
+
+	mdp: mdp@1a01000 {
+		...
+		iommus = <&apps_iommu 4>;
+	};
+
+	gpu@01c00000 {
+		...
+		iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
+	};
From patchwork Thu Jul 13 12:07:45 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [RESEND,2/4] iommu: arm-smmu: split out register defines
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9838371
Message-Id: <20170713120747.20490-3-robdclark@gmail.com>
To: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org, Archit Taneja <architt@codeaurora.org>,
 Rob Herring <robh@kernel.org>, Will Deacon <will.deacon@arm.com>,
 Sricharan <sricharan@codeaurora.org>,
 Mark Rutland <mark.rutland@arm.com>, Robin Murphy <robin.murphy@arm.com>,
 Rob Clark <robdclark@gmail.com>
Date: Thu, 13 Jul 2017 08:07:45 -0400

I want to re-use some of these for qcom_iommu, which has (roughly) the
same context-bank registers.

Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/iommu/arm-smmu-regs.h | 227 ++++++++++++++++++++++++++++++++++++++++++
 drivers/iommu/arm-smmu.c      | 203 +------------------------------------
 2 files changed, 228 insertions(+), 202 deletions(-)
 create mode 100644 drivers/iommu/arm-smmu-regs.h

diff --git a/drivers/iommu/arm-smmu-regs.h b/drivers/iommu/arm-smmu-regs.h
new file mode 100644
index 000000000000..87589c863068
--- /dev/null
+++ b/drivers/iommu/arm-smmu-regs.h
@@ -0,0 +1,227 @@
+/*
+ * IOMMU API for ARM architected SMMU implementations.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2013 ARM Limited
+ *
+ * Author: Will Deacon <will.deacon@arm.com>
+ */
+
+#ifndef _ARM_SMMU_REGS_H
+#define _ARM_SMMU_REGS_H
+
+/* Configuration registers */
+#define ARM_SMMU_GR0_sCR0		0x0
+#define sCR0_CLIENTPD			(1 << 0)
+#define sCR0_GFRE			(1 << 1)
+#define sCR0_GFIE			(1 << 2)
+#define sCR0_EXIDENABLE			(1 << 3)
+#define sCR0_GCFGFRE			(1 << 4)
+#define sCR0_GCFGFIE			(1 << 5)
+#define sCR0_USFCFG			(1 << 10)
+#define sCR0_VMIDPNE			(1 << 11)
+#define sCR0_PTM			(1 << 12)
+#define sCR0_FB				(1 << 13)
+#define sCR0_VMID16EN			(1 << 31)
+#define sCR0_BSU_SHIFT			14
+#define sCR0_BSU_MASK			0x3
+
+/* Auxiliary Configuration register */
+#define ARM_SMMU_GR0_sACR		0x10
+
+/* Identification registers */
+#define ARM_SMMU_GR0_ID0		0x20
+#define ARM_SMMU_GR0_ID1		0x24
+#define ARM_SMMU_GR0_ID2		0x28
+#define ARM_SMMU_GR0_ID3		0x2c
+#define ARM_SMMU_GR0_ID4		0x30
+#define ARM_SMMU_GR0_ID5		0x34
+#define ARM_SMMU_GR0_ID6		0x38
+#define ARM_SMMU_GR0_ID7		0x3c
+#define ARM_SMMU_GR0_sGFSR		0x48
+#define ARM_SMMU_GR0_sGFSYNR0		0x50
+#define ARM_SMMU_GR0_sGFSYNR1		0x54
+#define ARM_SMMU_GR0_sGFSYNR2		0x58
+
+#define ID0_S1TS			(1 << 30)
+#define ID0_S2TS			(1 << 29)
+#define ID0_NTS				(1 << 28)
+#define ID0_SMS				(1 << 27)
+#define ID0_ATOSNS			(1 << 26)
+#define ID0_PTFS_NO_AARCH32		(1 << 25)
+#define ID0_PTFS_NO_AARCH32S		(1 << 24)
+#define ID0_CTTW			(1 << 14)
+#define ID0_NUMIRPT_SHIFT		16
+#define ID0_NUMIRPT_MASK		0xff
+#define ID0_NUMSIDB_SHIFT		9
+#define ID0_NUMSIDB_MASK		0xf
+#define ID0_EXIDS			(1 << 8)
+#define ID0_NUMSMRG_SHIFT		0
+#define ID0_NUMSMRG_MASK		0xff
+
+#define ID1_PAGESIZE			(1 << 31)
+#define ID1_NUMPAGENDXB_SHIFT		28
+#define ID1_NUMPAGENDXB_MASK		7
+#define ID1_NUMS2CB_SHIFT		16
+#define ID1_NUMS2CB_MASK		0xff
+#define ID1_NUMCB_SHIFT			0
+#define ID1_NUMCB_MASK			0xff
+
+#define ID2_OAS_SHIFT			4
+#define ID2_OAS_MASK			0xf
+#define ID2_IAS_SHIFT			0
+#define ID2_IAS_MASK			0xf
+#define ID2_UBS_SHIFT			8
+#define ID2_UBS_MASK			0xf
+#define ID2_PTFS_4K			(1 << 12)
+#define ID2_PTFS_16K			(1 << 13)
+#define ID2_PTFS_64K			(1 << 14)
+#define ID2_VMID16			(1 << 15)
+
+#define ID7_MAJOR_SHIFT			4
+#define ID7_MAJOR_MASK			0xf
+
+/* Global TLB invalidation */
+#define ARM_SMMU_GR0_TLBIVMID		0x64
+#define ARM_SMMU_GR0_TLBIALLNSNH	0x68
+#define ARM_SMMU_GR0_TLBIALLH		0x6c
+#define ARM_SMMU_GR0_sTLBGSYNC		0x70
+#define ARM_SMMU_GR0_sTLBGSTATUS	0x74
+#define sTLBGSTATUS_GSACTIVE		(1 << 0)
+#define TLB_LOOP_TIMEOUT		1000000	/* 1s! */
+#define TLB_SPIN_COUNT			10
+
+/* Stream mapping registers */
+#define ARM_SMMU_GR0_SMR(n)		(0x800 + ((n) << 2))
+#define SMR_VALID			(1 << 31)
+#define SMR_MASK_SHIFT			16
+#define SMR_ID_SHIFT			0
+
+#define ARM_SMMU_GR0_S2CR(n)		(0xc00 + ((n) << 2))
+#define S2CR_CBNDX_SHIFT		0
+#define S2CR_CBNDX_MASK			0xff
+#define S2CR_EXIDVALID			(1 << 10)
+#define S2CR_TYPE_SHIFT			16
+#define S2CR_TYPE_MASK			0x3
+enum arm_smmu_s2cr_type {
+	S2CR_TYPE_TRANS,
+	S2CR_TYPE_BYPASS,
+	S2CR_TYPE_FAULT,
+};
+
+#define S2CR_PRIVCFG_SHIFT		24
+#define S2CR_PRIVCFG_MASK		0x3
+enum arm_smmu_s2cr_privcfg {
+	S2CR_PRIVCFG_DEFAULT,
+	S2CR_PRIVCFG_DIPAN,
+	S2CR_PRIVCFG_UNPRIV,
+	S2CR_PRIVCFG_PRIV,
+};
+
+/* Context bank attribute registers */
+#define ARM_SMMU_GR1_CBAR(n)		(0x0 + ((n) << 2))
+#define CBAR_VMID_SHIFT			0
+#define CBAR_VMID_MASK			0xff
+#define CBAR_S1_BPSHCFG_SHIFT		8
+#define CBAR_S1_BPSHCFG_MASK		3
+#define CBAR_S1_BPSHCFG_NSH		3
+#define CBAR_S1_MEMATTR_SHIFT		12
+#define CBAR_S1_MEMATTR_MASK		0xf
+#define CBAR_S1_MEMATTR_WB		0xf
+#define CBAR_TYPE_SHIFT			16
+#define CBAR_TYPE_MASK			0x3
+#define CBAR_TYPE_S2_TRANS		(0 << CBAR_TYPE_SHIFT)
+#define CBAR_TYPE_S1_TRANS_S2_BYPASS	(1 << CBAR_TYPE_SHIFT)
+#define CBAR_TYPE_S1_TRANS_S2_FAULT	(2 << CBAR_TYPE_SHIFT)
+#define CBAR_TYPE_S1_TRANS_S2_TRANS	(3 << CBAR_TYPE_SHIFT)
+#define CBAR_IRPTNDX_SHIFT		24
+#define CBAR_IRPTNDX_MASK		0xff
+
+#define ARM_SMMU_GR1_CBA2R(n)		(0x800 + ((n) << 2))
+#define CBA2R_RW64_32BIT		(0 << 0)
+#define CBA2R_RW64_64BIT		(1 << 0)
+#define CBA2R_VMID_SHIFT		16
+#define CBA2R_VMID_MASK			0xffff
+
+#define ARM_SMMU_CB_SCTLR		0x0
+#define ARM_SMMU_CB_ACTLR		0x4
+#define ARM_SMMU_CB_RESUME		0x8
+#define ARM_SMMU_CB_TTBCR2		0x10
+#define ARM_SMMU_CB_TTBR0		0x20
+#define ARM_SMMU_CB_TTBR1		0x28
+#define ARM_SMMU_CB_TTBCR		0x30
+#define ARM_SMMU_CB_CONTEXTIDR		0x34
+#define ARM_SMMU_CB_S1_MAIR0		0x38
+#define ARM_SMMU_CB_S1_MAIR1		0x3c
+#define ARM_SMMU_CB_PAR			0x50
+#define ARM_SMMU_CB_FSR			0x58
+#define ARM_SMMU_CB_FAR			0x60
+#define ARM_SMMU_CB_FSYNR0		0x68
+#define ARM_SMMU_CB_S1_TLBIVA		0x600
+#define ARM_SMMU_CB_S1_TLBIASID		0x610
+#define ARM_SMMU_CB_S1_TLBIVAL		0x620
+#define ARM_SMMU_CB_S2_TLBIIPAS2	0x630
+#define ARM_SMMU_CB_S2_TLBIIPAS2L	0x638
+#define ARM_SMMU_CB_TLBSYNC		0x7f0
+#define ARM_SMMU_CB_TLBSTATUS		0x7f4
+#define ARM_SMMU_CB_ATS1PR		0x800
+#define ARM_SMMU_CB_ATSR		0x8f0
+
+#define SCTLR_S1_ASIDPNE		(1 << 12)
+#define SCTLR_CFCFG			(1 << 7)
+#define SCTLR_CFIE			(1 << 6)
+#define SCTLR_CFRE			(1 << 5)
+#define SCTLR_E				(1 << 4)
+#define SCTLR_AFE			(1 << 2)
+#define SCTLR_TRE			(1 << 1)
+#define SCTLR_M				(1 << 0)
+
+#define ARM_MMU500_ACTLR_CPRE		(1 << 1)
+
+#define ARM_MMU500_ACR_CACHE_LOCK	(1 << 26)
+#define ARM_MMU500_ACR_SMTNMB_TLBEN	(1 << 8)
+
+#define CB_PAR_F			(1 << 0)
+
+#define ATSR_ACTIVE			(1 << 0)
+
+#define RESUME_RETRY			(0 << 0)
+#define RESUME_TERMINATE		(1 << 0)
+
+#define TTBCR2_SEP_SHIFT		15
+#define TTBCR2_SEP_UPSTREAM		(0x7 << TTBCR2_SEP_SHIFT)
+#define TTBCR2_AS			(1 << 4)
+
+#define TTBRn_ASID_SHIFT		48
+
+#define FSR_MULTI			(1 << 31)
+#define FSR_SS				(1 << 30)
+#define FSR_UUT				(1 << 8)
+#define FSR_ASF				(1 << 7)
+#define FSR_TLBLKF			(1 << 6)
+#define FSR_TLBMCF			(1 << 5)
+#define FSR_EF				(1 << 4)
+#define FSR_PF				(1 << 3)
+#define FSR_AFF				(1 << 2)
+#define FSR_TF				(1 << 1)
+
+#define FSR_IGN				(FSR_AFF | FSR_ASF | \
+					 FSR_TLBMCF | FSR_TLBLKF)
+#define FSR_FAULT			(FSR_MULTI | FSR_SS | FSR_UUT | \
+					 FSR_EF | FSR_PF | FSR_TF | FSR_IGN)
+
+#define FSYNR0_WNR			(1 << 4)
+
+#endif /* _ARM_SMMU_REGS_H */
diff --git a/drivers/iommu/arm-smmu.c b/drivers/iommu/arm-smmu.c
index 7ec30b08b3bd..ca9c20f915a8 100644
--- a/drivers/iommu/arm-smmu.c
+++ b/drivers/iommu/arm-smmu.c
@@ -54,6 +54,7 @@
 #include <linux/amba/bus.h>
 
 #include "io-pgtable.h"
+#include "arm-smmu-regs.h"
 
 /* Maximum number of context banks per SMMU */
 #define ARM_SMMU_MAX_CBS		128
@@ -83,211 +84,9 @@
 #define smmu_write_atomic_lq		writel_relaxed
 #endif
 
-/* Configuration registers */
-#define ARM_SMMU_GR0_sCR0		0x0
-#define sCR0_CLIENTPD			(1 << 0)
-#define sCR0_GFRE			(1 << 1)
-#define sCR0_GFIE			(1 << 2)
-#define sCR0_EXIDENABLE			(1 << 3)
-#define sCR0_GCFGFRE			(1 << 4)
-#define sCR0_GCFGFIE			(1 << 5)
-#define sCR0_USFCFG			(1 << 10)
-#define sCR0_VMIDPNE			(1 << 11)
-#define sCR0_PTM			(1 << 12)
-#define sCR0_FB				(1 << 13)
-#define sCR0_VMID16EN			(1 << 31)
-#define sCR0_BSU_SHIFT			14
-#define sCR0_BSU_MASK			0x3
-
-/* Auxiliary Configuration register */
-#define ARM_SMMU_GR0_sACR		0x10
-
-/* Identification registers */
-#define ARM_SMMU_GR0_ID0		0x20
-#define ARM_SMMU_GR0_ID1		0x24
-#define ARM_SMMU_GR0_ID2		0x28
-#define ARM_SMMU_GR0_ID3		0x2c
-#define ARM_SMMU_GR0_ID4		0x30
-#define ARM_SMMU_GR0_ID5		0x34
-#define ARM_SMMU_GR0_ID6		0x38
-#define ARM_SMMU_GR0_ID7		0x3c
-#define ARM_SMMU_GR0_sGFSR		0x48
-#define ARM_SMMU_GR0_sGFSYNR0		0x50
-#define ARM_SMMU_GR0_sGFSYNR1		0x54
-#define ARM_SMMU_GR0_sGFSYNR2		0x58
-
-#define ID0_S1TS			(1 << 30)
-#define ID0_S2TS			(1 << 29)
-#define ID0_NTS				(1 << 28)
-#define ID0_SMS				(1 << 27)
-#define ID0_ATOSNS			(1 << 26)
-#define ID0_PTFS_NO_AARCH32		(1 << 25)
-#define ID0_PTFS_NO_AARCH32S		(1 << 24)
-#define ID0_CTTW			(1 << 14)
-#define ID0_NUMIRPT_SHIFT		16
-#define ID0_NUMIRPT_MASK		0xff
-#define ID0_NUMSIDB_SHIFT		9
-#define ID0_NUMSIDB_MASK		0xf
-#define ID0_EXIDS			(1 << 8)
-#define ID0_NUMSMRG_SHIFT		0
-#define ID0_NUMSMRG_MASK		0xff
-
-#define ID1_PAGESIZE			(1 << 31)
-#define ID1_NUMPAGENDXB_SHIFT		28
-#define ID1_NUMPAGENDXB_MASK		7
-#define ID1_NUMS2CB_SHIFT		16
-#define ID1_NUMS2CB_MASK		0xff
-#define ID1_NUMCB_SHIFT			0
-#define ID1_NUMCB_MASK			0xff
-
-#define ID2_OAS_SHIFT			4
-#define ID2_OAS_MASK			0xf
-#define ID2_IAS_SHIFT			0
-#define ID2_IAS_MASK			0xf
-#define ID2_UBS_SHIFT			8
-#define ID2_UBS_MASK			0xf
-#define ID2_PTFS_4K			(1 << 12)
-#define ID2_PTFS_16K			(1 << 13)
-#define ID2_PTFS_64K			(1 << 14)
-#define ID2_VMID16			(1 << 15)
-
-#define ID7_MAJOR_SHIFT			4
-#define ID7_MAJOR_MASK			0xf
-
-/* Global TLB invalidation */
-#define ARM_SMMU_GR0_TLBIVMID		0x64
-#define ARM_SMMU_GR0_TLBIALLNSNH	0x68
-#define ARM_SMMU_GR0_TLBIALLH		0x6c
-#define ARM_SMMU_GR0_sTLBGSYNC		0x70
-#define ARM_SMMU_GR0_sTLBGSTATUS	0x74
-#define sTLBGSTATUS_GSACTIVE		(1 << 0)
-#define TLB_LOOP_TIMEOUT		1000000	/* 1s! */
-#define TLB_SPIN_COUNT			10
-
-/* Stream mapping registers */
-#define ARM_SMMU_GR0_SMR(n)		(0x800 + ((n) << 2))
-#define SMR_VALID			(1 << 31)
-#define SMR_MASK_SHIFT			16
-#define SMR_ID_SHIFT			0
-
-#define ARM_SMMU_GR0_S2CR(n)		(0xc00 + ((n) << 2))
-#define S2CR_CBNDX_SHIFT		0
-#define S2CR_CBNDX_MASK			0xff
-#define S2CR_EXIDVALID			(1 << 10)
-#define S2CR_TYPE_SHIFT			16
-#define S2CR_TYPE_MASK			0x3
-enum arm_smmu_s2cr_type {
-	S2CR_TYPE_TRANS,
-	S2CR_TYPE_BYPASS,
-	S2CR_TYPE_FAULT,
-};
-
-#define S2CR_PRIVCFG_SHIFT		24
-#define S2CR_PRIVCFG_MASK		0x3
-enum arm_smmu_s2cr_privcfg {
-	S2CR_PRIVCFG_DEFAULT,
-	S2CR_PRIVCFG_DIPAN,
-	S2CR_PRIVCFG_UNPRIV,
-	S2CR_PRIVCFG_PRIV,
-};
-
-/* Context bank attribute registers */
-#define ARM_SMMU_GR1_CBAR(n)		(0x0 + ((n) << 2))
-#define CBAR_VMID_SHIFT			0
-#define CBAR_VMID_MASK			0xff
-#define CBAR_S1_BPSHCFG_SHIFT		8
-#define CBAR_S1_BPSHCFG_MASK		3
-#define CBAR_S1_BPSHCFG_NSH		3
-#define CBAR_S1_MEMATTR_SHIFT		12
-#define CBAR_S1_MEMATTR_MASK		0xf
-#define CBAR_S1_MEMATTR_WB		0xf
-#define CBAR_TYPE_SHIFT			16
-#define CBAR_TYPE_MASK			0x3
-#define CBAR_TYPE_S2_TRANS		(0 << CBAR_TYPE_SHIFT)
-#define CBAR_TYPE_S1_TRANS_S2_BYPASS	(1 << CBAR_TYPE_SHIFT)
-#define CBAR_TYPE_S1_TRANS_S2_FAULT	(2 << CBAR_TYPE_SHIFT)
-#define CBAR_TYPE_S1_TRANS_S2_TRANS	(3 << CBAR_TYPE_SHIFT)
-#define CBAR_IRPTNDX_SHIFT		24
-#define CBAR_IRPTNDX_MASK		0xff
-
-#define ARM_SMMU_GR1_CBA2R(n)		(0x800 + ((n) << 2))
-#define CBA2R_RW64_32BIT		(0 << 0)
-#define CBA2R_RW64_64BIT		(1 << 0)
-#define CBA2R_VMID_SHIFT		16
-#define CBA2R_VMID_MASK			0xffff
-
 /* Translation context bank */
 #define ARM_SMMU_CB(smmu, n)	((smmu)->cb_base + ((n) << (smmu)->pgshift))
 
-#define ARM_SMMU_CB_SCTLR		0x0
-#define ARM_SMMU_CB_ACTLR		0x4
-#define ARM_SMMU_CB_RESUME		0x8
-#define ARM_SMMU_CB_TTBCR2		0x10
-#define ARM_SMMU_CB_TTBR0		0x20
-#define ARM_SMMU_CB_TTBR1		0x28
-#define ARM_SMMU_CB_TTBCR		0x30
-#define ARM_SMMU_CB_CONTEXTIDR		0x34
-#define ARM_SMMU_CB_S1_MAIR0		0x38
-#define ARM_SMMU_CB_S1_MAIR1		0x3c
-#define ARM_SMMU_CB_PAR			0x50
-#define ARM_SMMU_CB_FSR			0x58
-#define ARM_SMMU_CB_FAR			0x60
-#define ARM_SMMU_CB_FSYNR0		0x68
-#define ARM_SMMU_CB_S1_TLBIVA		0x600
-#define ARM_SMMU_CB_S1_TLBIASID		0x610
-#define ARM_SMMU_CB_S1_TLBIVAL		0x620
-#define ARM_SMMU_CB_S2_TLBIIPAS2	0x630
-#define ARM_SMMU_CB_S2_TLBIIPAS2L	0x638
-#define ARM_SMMU_CB_TLBSYNC		0x7f0
-#define ARM_SMMU_CB_TLBSTATUS		0x7f4
-#define ARM_SMMU_CB_ATS1PR		0x800
-#define ARM_SMMU_CB_ATSR		0x8f0
-
-#define SCTLR_S1_ASIDPNE		(1 << 12)
-#define SCTLR_CFCFG			(1 << 7)
-#define SCTLR_CFIE			(1 << 6)
-#define SCTLR_CFRE			(1 << 5)
-#define SCTLR_E				(1 << 4)
-#define SCTLR_AFE			(1 << 2)
-#define SCTLR_TRE			(1 << 1)
-#define SCTLR_M				(1 << 0)
-
-#define ARM_MMU500_ACTLR_CPRE		(1 << 1)
-
-#define ARM_MMU500_ACR_CACHE_LOCK	(1 << 26)
-#define ARM_MMU500_ACR_SMTNMB_TLBEN	(1 << 8)
-
-#define CB_PAR_F			(1 << 0)
-
-#define ATSR_ACTIVE			(1 << 0)
-
-#define RESUME_RETRY			(0 << 0)
-#define RESUME_TERMINATE		(1 << 0)
-
-#define TTBCR2_SEP_SHIFT		15
-#define TTBCR2_SEP_UPSTREAM		(0x7 << TTBCR2_SEP_SHIFT)
-#define TTBCR2_AS			(1 << 4)
-
-#define TTBRn_ASID_SHIFT		48
-
-#define FSR_MULTI			(1 << 31)
-#define FSR_SS				(1 << 30)
-#define FSR_UUT				(1 << 8)
-#define FSR_ASF				(1 << 7)
-#define FSR_TLBLKF			(1 << 6)
-#define FSR_TLBMCF			(1 << 5)
-#define FSR_EF				(1 << 4)
-#define FSR_PF				(1 << 3)
-#define FSR_AFF				(1 << 2)
-#define FSR_TF				(1 << 1)
-
-#define FSR_IGN				(FSR_AFF | FSR_ASF | \
-					 FSR_TLBMCF | FSR_TLBLKF)
-#define FSR_FAULT			(FSR_MULTI | FSR_SS | FSR_UUT | \
-					 FSR_EF | FSR_PF | FSR_TF | FSR_IGN)
-
-#define FSYNR0_WNR			(1 << 4)
-
 #define MSI_IOVA_BASE			0x8000000
 #define MSI_IOVA_LENGTH			0x100000
 
From patchwork Thu Jul 13 12:07:46 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [RESEND,3/4] iommu: add qcom_iommu
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9838375
Message-Id: <20170713120747.20490-4-robdclark@gmail.com>
To: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org, Archit Taneja <architt@codeaurora.org>,
 Rob Herring <robh@kernel.org>, Will Deacon <will.deacon@arm.com>,
 Sricharan <sricharan@codeaurora.org>,
 Mark Rutland <mark.rutland@arm.com>, Robin Murphy <robin.murphy@arm.com>,
 Rob Clark <robdclark@gmail.com>
Date: Thu, 13 Jul 2017 08:07:46 -0400

An iommu driver for Qualcomm "B" family devices which do implement the
ARM SMMU spec, but not in a way that is compatible with how the arm-smmu
driver is designed.  It seems SMMU_SCR1.GASRAE=1 so the global register
space is not accessible.  This means it needs to get configuration from
devicetree instead of setting it up dynamically.

In the end, other than register definitions, there is not much code to
share with arm-smmu (other than what has already been refactored out
into the pgtable helpers).

Signed-off-by: Rob Clark <robdclark@gmail.com>
Tested-by: Riku Voipio <riku.voipio@linaro.org>
---
v1: original
v2: bindings cleanups and kconfig issues that kbuild robot pointed out
v3: fix issues pointed out by Rob H. and actually make device removal
    work
v4: fix WARN_ON() splats reported by Archit
v5: some fixes to build as a module.. note that it cannot actually
    be built as a module yet (at minimum a bunch of other iommu syms
    that are needed are not exported, but there may be more to it
    than that), but at least qcom_iommu is ready should it become
    possible to build iommu drivers as modules.
v6: Add additional pm-runtime get/puts around paths that can hit
    TLB inv, to avoid unclocked register access if device using the
    iommu is not powered on.  And pre-emptively clear interrupts
    before registering IRQ handler just in case the bootloader has
    left us a surpise.
v7: Address review comments from Robin (don't associate iommu_group
    with context bank, table lookup instead of list to find context
    bank, etc)
v8: Fix silly bug on detach.  Actually Robin already pointed it out
    but I somehow overlooked that comment when preparing v7.

 drivers/iommu/Kconfig      |  10 +
 drivers/iommu/Makefile     |   1 +
 drivers/iommu/qcom_iommu.c | 868 +++++++++++++++++++++++++++++++++++++++++++++
 3 files changed, 879 insertions(+)
 create mode 100644 drivers/iommu/qcom_iommu.c

diff --git a/drivers/iommu/Kconfig b/drivers/iommu/Kconfig
index 6ee3a25ae731..aa4b62893fe1 100644
--- a/drivers/iommu/Kconfig
+++ b/drivers/iommu/Kconfig
@@ -367,4 +367,14 @@ config MTK_IOMMU_V1
 
 	  if unsure, say N here.
 
+config QCOM_IOMMU
+	# Note: iommu drivers cannot (yet?) be built as modules
+	bool "Qualcomm IOMMU Support"
+	depends on ARCH_QCOM || COMPILE_TEST
+	select IOMMU_API
+	select IOMMU_IO_PGTABLE_LPAE
+	select ARM_DMA_USE_IOMMU
+	help
+	  Support for IOMMU on certain Qualcomm SoCs.
+
 endif # IOMMU_SUPPORT
diff --git a/drivers/iommu/Makefile b/drivers/iommu/Makefile
index 195f7b997d8e..b910aea813a1 100644
--- a/drivers/iommu/Makefile
+++ b/drivers/iommu/Makefile
@@ -27,3 +27,4 @@ obj-$(CONFIG_TEGRA_IOMMU_SMMU) += tegra-smmu.o
 obj-$(CONFIG_EXYNOS_IOMMU) += exynos-iommu.o
 obj-$(CONFIG_FSL_PAMU) += fsl_pamu.o fsl_pamu_domain.o
 obj-$(CONFIG_S390_IOMMU) += s390-iommu.o
+obj-$(CONFIG_QCOM_IOMMU) += qcom_iommu.o
diff --git a/drivers/iommu/qcom_iommu.c b/drivers/iommu/qcom_iommu.c
new file mode 100644
index 000000000000..860cad1cb167
--- /dev/null
+++ b/drivers/iommu/qcom_iommu.c
@@ -0,0 +1,868 @@
+/*
+ * IOMMU API for QCOM secure IOMMUs.  Somewhat based on arm-smmu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ * Copyright (C) 2013 ARM Limited
+ * Copyright (C) 2017 Red Hat
+ */
+
+#include <linux/atomic.h>
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/dma-iommu.h>
+#include <linux/dma-mapping.h>
+#include <linux/err.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/io-64-nonatomic-hi-lo.h>
+#include <linux/iommu.h>
+#include <linux/iopoll.h>
+#include <linux/kconfig.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/of_device.h>
+#include <linux/of_iommu.h>
+#include <linux/platform_device.h>
+#include <linux/pm.h>
+#include <linux/pm_runtime.h>
+#include <linux/qcom_scm.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "io-pgtable.h"
+#include "arm-smmu-regs.h"
+
+#define SMMU_INTR_SEL_NS     0x2000
+
+struct qcom_iommu_ctx;
+
+struct qcom_iommu_dev {
+	/* IOMMU core code handle */
+	struct iommu_device	 iommu;
+	struct device		*dev;
+	struct clk		*iface_clk;
+	struct clk		*bus_clk;
+	void __iomem		*local_base;
+	u32			 sec_id;
+	u8			 num_ctxs;
+	struct qcom_iommu_ctx	*ctxs[0];   /* indexed by asid-1 */
+};
+
+struct qcom_iommu_ctx {
+	struct device		*dev;
+	void __iomem		*base;
+	bool			 secure_init;
+	u8			 asid;      /* asid and ctx bank # are 1:1 */
+};
+
+struct qcom_iommu_domain {
+	struct io_pgtable_ops	*pgtbl_ops;
+	spinlock_t		 pgtbl_lock;
+	struct mutex		 init_mutex; /* Protects iommu pointer */
+	struct iommu_domain	 domain;
+	struct qcom_iommu_dev	*iommu;
+};
+
+static struct qcom_iommu_domain *to_qcom_iommu_domain(struct iommu_domain *dom)
+{
+	return container_of(dom, struct qcom_iommu_domain, domain);
+}
+
+static const struct iommu_ops qcom_iommu_ops;
+
+static struct qcom_iommu_dev * to_iommu(struct iommu_fwspec *fwspec)
+{
+	if (!fwspec || fwspec->ops != &qcom_iommu_ops)
+		return NULL;
+	return fwspec->iommu_priv;
+}
+
+static struct qcom_iommu_ctx * to_ctx(struct iommu_fwspec *fwspec, unsigned asid)
+{
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(fwspec);
+	if (!qcom_iommu)
+		return NULL;
+	return qcom_iommu->ctxs[asid - 1];
+}
+
+static inline void
+iommu_writel(struct qcom_iommu_ctx *ctx, unsigned reg, u32 val)
+{
+	writel_relaxed(val, ctx->base + reg);
+}
+
+static inline void
+iommu_writeq(struct qcom_iommu_ctx *ctx, unsigned reg, u64 val)
+{
+	writeq_relaxed(val, ctx->base + reg);
+}
+
+static inline u32
+iommu_readl(struct qcom_iommu_ctx *ctx, unsigned reg)
+{
+	return readl_relaxed(ctx->base + reg);
+}
+
+static inline u64
+iommu_readq(struct qcom_iommu_ctx *ctx, unsigned reg)
+{
+	return readq_relaxed(ctx->base + reg);
+}
+
+static void qcom_iommu_tlb_sync(void *cookie)
+{
+	struct iommu_fwspec *fwspec = cookie;
+	unsigned i;
+
+	for (i = 0; i < fwspec->num_ids; i++) {
+		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		unsigned int val, ret;
+
+		iommu_writel(ctx, ARM_SMMU_CB_TLBSYNC, 0);
+
+		ret = readl_poll_timeout(ctx->base + ARM_SMMU_CB_TLBSTATUS, val,
+					 (val & 0x1) == 0, 0, 5000000);
+		if (ret)
+			dev_err(ctx->dev, "timeout waiting for TLB SYNC\n");
+	}
+}
+
+static void qcom_iommu_tlb_inv_context(void *cookie)
+{
+	struct iommu_fwspec *fwspec = cookie;
+	unsigned i;
+
+	for (i = 0; i < fwspec->num_ids; i++) {
+		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		iommu_writel(ctx, ARM_SMMU_CB_S1_TLBIASID, ctx->asid);
+	}
+
+	qcom_iommu_tlb_sync(cookie);
+}
+
+static void qcom_iommu_tlb_inv_range_nosync(unsigned long iova, size_t size,
+					    size_t granule, bool leaf, void *cookie)
+{
+	struct iommu_fwspec *fwspec = cookie;
+	unsigned i, reg;
+
+	reg = leaf ? ARM_SMMU_CB_S1_TLBIVAL : ARM_SMMU_CB_S1_TLBIVA;
+
+	for (i = 0; i < fwspec->num_ids; i++) {
+		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+		size_t s = size;
+
+		iova &= ~12UL;
+		iova |= ctx->asid;
+		do {
+			iommu_writel(ctx, reg, iova);
+			iova += granule;
+		} while (s -= granule);
+	}
+}
+
+static const struct iommu_gather_ops qcom_gather_ops = {
+	.tlb_flush_all	= qcom_iommu_tlb_inv_context,
+	.tlb_add_flush	= qcom_iommu_tlb_inv_range_nosync,
+	.tlb_sync	= qcom_iommu_tlb_sync,
+};
+
+static irqreturn_t qcom_iommu_fault(int irq, void *dev)
+{
+	struct qcom_iommu_ctx *ctx = dev;
+	u32 fsr, fsynr;
+	u64 iova;
+
+	fsr = iommu_readl(ctx, ARM_SMMU_CB_FSR);
+
+	if (!(fsr & FSR_FAULT))
+		return IRQ_NONE;
+
+	fsynr = iommu_readl(ctx, ARM_SMMU_CB_FSYNR0);
+	iova = iommu_readq(ctx, ARM_SMMU_CB_FAR);
+
+	dev_err_ratelimited(ctx->dev,
+			    "Unhandled context fault: fsr=0x%x, "
+			    "iova=0x%016llx, fsynr=0x%x, cb=%d\n",
+			    fsr, iova, fsynr, ctx->asid);
+
+	iommu_writel(ctx, ARM_SMMU_CB_FSR, fsr);
+
+	return IRQ_HANDLED;
+}
+
+static int qcom_iommu_init_domain(struct iommu_domain *domain,
+				  struct qcom_iommu_dev *qcom_iommu,
+				  struct iommu_fwspec *fwspec)
+{
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	struct io_pgtable_ops *pgtbl_ops;
+	struct io_pgtable_cfg pgtbl_cfg;
+	int i, ret = 0;
+	u32 reg;
+
+	mutex_lock(&qcom_domain->init_mutex);
+	if (qcom_domain->iommu)
+		goto out_unlock;
+
+	pgtbl_cfg = (struct io_pgtable_cfg) {
+		.pgsize_bitmap	= qcom_iommu_ops.pgsize_bitmap,
+		.ias		= 32,
+		.oas		= 40,
+		.tlb		= &qcom_gather_ops,
+		.iommu_dev	= qcom_iommu->dev,
+	};
+
+	qcom_domain->iommu = qcom_iommu;
+	pgtbl_ops = alloc_io_pgtable_ops(ARM_32_LPAE_S1, &pgtbl_cfg, fwspec);
+	if (!pgtbl_ops) {
+		dev_err(qcom_iommu->dev, "failed to allocate pagetable ops\n");
+		ret = -ENOMEM;
+		goto out_clear_iommu;
+	}
+
+	/* Update the domain's page sizes to reflect the page table format */
+	domain->pgsize_bitmap = pgtbl_cfg.pgsize_bitmap;
+	domain->geometry.aperture_end = (1ULL << pgtbl_cfg.ias) - 1;
+	domain->geometry.force_aperture = true;
+
+	for (i = 0; i < fwspec->num_ids; i++) {
+		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+
+		if (!ctx->secure_init) {
+			ret = qcom_scm_restore_sec_cfg(qcom_iommu->sec_id, ctx->asid);
+			if (ret) {
+				dev_err(qcom_iommu->dev, "secure init failed: %d\n", ret);
+				goto out_clear_iommu;
+			}
+			ctx->secure_init = true;
+		}
+
+		/* TTBRs */
+		iommu_writeq(ctx, ARM_SMMU_CB_TTBR0,
+				pgtbl_cfg.arm_lpae_s1_cfg.ttbr[0] |
+				((u64)ctx->asid << TTBRn_ASID_SHIFT));
+		iommu_writeq(ctx, ARM_SMMU_CB_TTBR1,
+				pgtbl_cfg.arm_lpae_s1_cfg.ttbr[1] |
+				((u64)ctx->asid << TTBRn_ASID_SHIFT));
+
+		/* TTBCR */
+		iommu_writel(ctx, ARM_SMMU_CB_TTBCR2,
+				(pgtbl_cfg.arm_lpae_s1_cfg.tcr >> 32) |
+				TTBCR2_SEP_UPSTREAM);
+		iommu_writel(ctx, ARM_SMMU_CB_TTBCR,
+				pgtbl_cfg.arm_lpae_s1_cfg.tcr);
+
+		/* MAIRs (stage-1 only) */
+		iommu_writel(ctx, ARM_SMMU_CB_S1_MAIR0,
+				pgtbl_cfg.arm_lpae_s1_cfg.mair[0]);
+		iommu_writel(ctx, ARM_SMMU_CB_S1_MAIR1,
+				pgtbl_cfg.arm_lpae_s1_cfg.mair[1]);
+
+		/* SCTLR */
+		reg = SCTLR_CFIE | SCTLR_CFRE | SCTLR_AFE | SCTLR_TRE |
+			SCTLR_M | SCTLR_S1_ASIDPNE;
+
+		if (IS_ENABLED(CONFIG_BIG_ENDIAN))
+			reg |= SCTLR_E;
+
+		iommu_writel(ctx, ARM_SMMU_CB_SCTLR, reg);
+	}
+
+	mutex_unlock(&qcom_domain->init_mutex);
+
+	/* Publish page table ops for map/unmap */
+	qcom_domain->pgtbl_ops = pgtbl_ops;
+
+	return 0;
+
+out_clear_iommu:
+	qcom_domain->iommu = NULL;
+out_unlock:
+	mutex_unlock(&qcom_domain->init_mutex);
+	return ret;
+}
+
+static struct iommu_domain *qcom_iommu_domain_alloc(unsigned type)
+{
+	struct qcom_iommu_domain *qcom_domain;
+
+	if (type != IOMMU_DOMAIN_UNMANAGED && type != IOMMU_DOMAIN_DMA)
+		return NULL;
+	/*
+	 * Allocate the domain and initialise some of its data structures.
+	 * We can't really do anything meaningful until we've added a
+	 * master.
+	 */
+	qcom_domain = kzalloc(sizeof(*qcom_domain), GFP_KERNEL);
+	if (!qcom_domain)
+		return NULL;
+
+	if (type == IOMMU_DOMAIN_DMA &&
+	    iommu_get_dma_cookie(&qcom_domain->domain)) {
+		kfree(qcom_domain);
+		return NULL;
+	}
+
+	mutex_init(&qcom_domain->init_mutex);
+	spin_lock_init(&qcom_domain->pgtbl_lock);
+
+	return &qcom_domain->domain;
+}
+
+static void qcom_iommu_domain_free(struct iommu_domain *domain)
+{
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+
+	if (WARN_ON(qcom_domain->iommu))    /* forgot to detach? */
+		return;
+
+	iommu_put_dma_cookie(domain);
+
+	/* NOTE: unmap can be called after client device is powered off,
+	 * for example, with GPUs or anything involving dma-buf.  So we
+	 * cannot rely on the device_link.  Make sure the IOMMU is on to
+	 * avoid unclocked accesses in the TLB inv path:
+	 */
+	pm_runtime_get_sync(qcom_domain->iommu->dev);
+
+	free_io_pgtable_ops(qcom_domain->pgtbl_ops);
+
+	pm_runtime_put_sync(qcom_domain->iommu->dev);
+
+	kfree(qcom_domain);
+}
+
+static int qcom_iommu_attach_dev(struct iommu_domain *domain, struct device *dev)
+{
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev->iommu_fwspec);
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	int ret;
+
+	if (!qcom_iommu) {
+		dev_err(dev, "cannot attach to IOMMU, is it on the same bus?\n");
+		return -ENXIO;
+	}
+
+	/* Ensure that the domain is finalized */
+	pm_runtime_get_sync(qcom_iommu->dev);
+	ret = qcom_iommu_init_domain(domain, qcom_iommu, dev->iommu_fwspec);
+	pm_runtime_put_sync(qcom_iommu->dev);
+	if (ret < 0)
+		return ret;
+
+	/*
+	 * Sanity check the domain. We don't support domains across
+	 * different IOMMUs.
+	 */
+	if (qcom_domain->iommu != qcom_iommu) {
+		dev_err(dev, "cannot attach to IOMMU %s while already "
+			"attached to domain on IOMMU %s\n",
+			dev_name(qcom_domain->iommu->dev),
+			dev_name(qcom_iommu->dev));
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static void qcom_iommu_detach_dev(struct iommu_domain *domain, struct device *dev)
+{
+	struct iommu_fwspec *fwspec = dev->iommu_fwspec;
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(fwspec);
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	unsigned i;
+
+	if (!qcom_domain->iommu)
+		return;
+
+	pm_runtime_get_sync(qcom_iommu->dev);
+	for (i = 0; i < fwspec->num_ids; i++) {
+		struct qcom_iommu_ctx *ctx = to_ctx(fwspec, fwspec->ids[i]);
+
+		/* Disable the context bank: */
+		iommu_writel(ctx, ARM_SMMU_CB_SCTLR, 0);
+	}
+	pm_runtime_put_sync(qcom_iommu->dev);
+
+	qcom_domain->iommu = NULL;
+}
+
+static int qcom_iommu_map(struct iommu_domain *domain, unsigned long iova,
+			  phys_addr_t paddr, size_t size, int prot)
+{
+	int ret;
+	unsigned long flags;
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	struct io_pgtable_ops *ops = qcom_domain->pgtbl_ops;
+
+	if (!ops)
+		return -ENODEV;
+
+	spin_lock_irqsave(&qcom_domain->pgtbl_lock, flags);
+	ret = ops->map(ops, iova, paddr, size, prot);
+	spin_unlock_irqrestore(&qcom_domain->pgtbl_lock, flags);
+	return ret;
+}
+
+static size_t qcom_iommu_unmap(struct iommu_domain *domain, unsigned long iova,
+			       size_t size)
+{
+	size_t ret;
+	unsigned long flags;
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	struct io_pgtable_ops *ops = qcom_domain->pgtbl_ops;
+
+	if (!ops)
+		return 0;
+
+	/* NOTE: unmap can be called after client device is powered off,
+	 * for example, with GPUs or anything involving dma-buf.  So we
+	 * cannot rely on the device_link.  Make sure the IOMMU is on to
+	 * avoid unclocked accesses in the TLB inv path:
+	 */
+	pm_runtime_get_sync(qcom_domain->iommu->dev);
+	spin_lock_irqsave(&qcom_domain->pgtbl_lock, flags);
+	ret = ops->unmap(ops, iova, size);
+	spin_unlock_irqrestore(&qcom_domain->pgtbl_lock, flags);
+	pm_runtime_put_sync(qcom_domain->iommu->dev);
+
+	return ret;
+}
+
+static phys_addr_t qcom_iommu_iova_to_phys(struct iommu_domain *domain,
+					   dma_addr_t iova)
+{
+	phys_addr_t ret;
+	unsigned long flags;
+	struct qcom_iommu_domain *qcom_domain = to_qcom_iommu_domain(domain);
+	struct io_pgtable_ops *ops = qcom_domain->pgtbl_ops;
+
+	if (!ops)
+		return 0;
+
+	spin_lock_irqsave(&qcom_domain->pgtbl_lock, flags);
+	ret = ops->iova_to_phys(ops, iova);
+	spin_unlock_irqrestore(&qcom_domain->pgtbl_lock, flags);
+
+	return ret;
+}
+
+static bool qcom_iommu_capable(enum iommu_cap cap)
+{
+	switch (cap) {
+	case IOMMU_CAP_CACHE_COHERENCY:
+		/*
+		 * Return true here as the SMMU can always send out coherent
+		 * requests.
+		 */
+		return true;
+	case IOMMU_CAP_NOEXEC:
+		return true;
+	default:
+		return false;
+	}
+}
+
+static int qcom_iommu_add_device(struct device *dev)
+{
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev->iommu_fwspec);
+	struct iommu_group *group;
+	struct device_link *link;
+
+	if (!qcom_iommu)
+		return -ENODEV;
+
+	/*
+	 * Establish the link between iommu and master, so that the
+	 * iommu gets runtime enabled/disabled as per the master's
+	 * needs.
+	 */
+	link = device_link_add(dev, qcom_iommu->dev, DL_FLAG_PM_RUNTIME);
+	if (!link) {
+		dev_err(qcom_iommu->dev, "Unable to create device link between %s and %s\n",
+			dev_name(qcom_iommu->dev), dev_name(dev));
+		return -ENODEV;
+	}
+
+	group = iommu_group_get_for_dev(dev);
+	if (IS_ERR_OR_NULL(group))
+		return PTR_ERR_OR_ZERO(group);
+
+	iommu_group_put(group);
+	iommu_device_link(&qcom_iommu->iommu, dev);
+
+	return 0;
+}
+
+static void qcom_iommu_remove_device(struct device *dev)
+{
+	struct qcom_iommu_dev *qcom_iommu = to_iommu(dev->iommu_fwspec);
+
+	if (!qcom_iommu)
+		return;
+
+	iommu_device_unlink(&qcom_iommu->iommu, dev);
+	iommu_group_remove_device(dev);
+	iommu_fwspec_free(dev);
+}
+
+static int qcom_iommu_of_xlate(struct device *dev, struct of_phandle_args *args)
+{
+	struct qcom_iommu_dev *qcom_iommu;
+	struct platform_device *iommu_pdev;
+	unsigned asid = args->args[0];
+
+	if (args->args_count != 1) {
+		dev_err(dev, "incorrect number of iommu params found for %s "
+			"(found %d, expected 1)\n",
+			args->np->full_name, args->args_count);
+		return -EINVAL;
+	}
+
+	iommu_pdev = of_find_device_by_node(args->np);
+	if (WARN_ON(!iommu_pdev))
+		return -EINVAL;
+
+	qcom_iommu = platform_get_drvdata(iommu_pdev);
+
+	/* make sure the asid specified in dt is valid, so we don't have
+	 * to sanity check this elsewhere, since 'asid - 1' is used to
+	 * index into qcom_iommu->ctxs:
+	 */
+	if (WARN_ON(asid < 1) ||
+	    WARN_ON(asid > qcom_iommu->num_ctxs))
+		return -EINVAL;
+
+	if (!dev->iommu_fwspec->iommu_priv) {
+		dev->iommu_fwspec->iommu_priv = qcom_iommu;
+	} else {
+		/* make sure devices iommus dt node isn't referring to
+		 * multiple different iommu devices.  Multiple context
+		 * banks are ok, but multiple devices are not:
+		 */
+		if (WARN_ON(qcom_iommu != dev->iommu_fwspec->iommu_priv))
+			return -EINVAL;
+	}
+
+	return iommu_fwspec_add_ids(dev, &asid, 1);
+}
+
+static const struct iommu_ops qcom_iommu_ops = {
+	.capable	= qcom_iommu_capable,
+	.domain_alloc	= qcom_iommu_domain_alloc,
+	.domain_free	= qcom_iommu_domain_free,
+	.attach_dev	= qcom_iommu_attach_dev,
+	.detach_dev	= qcom_iommu_detach_dev,
+	.map		= qcom_iommu_map,
+	.unmap		= qcom_iommu_unmap,
+	.map_sg		= default_iommu_map_sg,
+	.iova_to_phys	= qcom_iommu_iova_to_phys,
+	.add_device	= qcom_iommu_add_device,
+	.remove_device	= qcom_iommu_remove_device,
+	.device_group	= generic_device_group,
+	.of_xlate	= qcom_iommu_of_xlate,
+	.pgsize_bitmap	= SZ_4K | SZ_64K | SZ_1M | SZ_16M,
+};
+
+static int qcom_iommu_enable_clocks(struct qcom_iommu_dev *qcom_iommu)
+{
+	int ret;
+
+	ret = clk_prepare_enable(qcom_iommu->iface_clk);
+	if (ret) {
+		dev_err(qcom_iommu->dev, "Couldn't enable iface_clk\n");
+		return ret;
+	}
+
+	ret = clk_prepare_enable(qcom_iommu->bus_clk);
+	if (ret) {
+		dev_err(qcom_iommu->dev, "Couldn't enable bus_clk\n");
+		clk_disable_unprepare(qcom_iommu->iface_clk);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void qcom_iommu_disable_clocks(struct qcom_iommu_dev *qcom_iommu)
+{
+	clk_disable_unprepare(qcom_iommu->bus_clk);
+	clk_disable_unprepare(qcom_iommu->iface_clk);
+}
+
+static int get_asid(const struct device_node *np)
+{
+	u32 reg;
+
+	/* read the "reg" property directly to get the relative address
+	 * of the context bank, and calculate the asid from that:
+	 */
+	if (of_property_read_u32_index(np, "reg", 0, &reg))
+		return -ENODEV;
+
+	return reg / 0x1000;      /* context banks are 0x1000 apart */
+}
+
+static int qcom_iommu_ctx_probe(struct platform_device *pdev)
+{
+	struct qcom_iommu_ctx *ctx;
+	struct device *dev = &pdev->dev;
+	struct qcom_iommu_dev *qcom_iommu = dev_get_drvdata(dev->parent);
+	struct resource *res;
+	int ret, irq;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->dev = dev;
+	platform_set_drvdata(pdev, ctx);
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	ctx->base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(ctx->base))
+		return PTR_ERR(ctx->base);
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0) {
+		dev_err(dev, "failed to get irq\n");
+		return -ENODEV;
+	}
+
+	/* clear IRQs before registering fault handler, just in case the
+	 * boot-loader left us a surprise:
+	 */
+	iommu_writel(ctx, ARM_SMMU_CB_FSR, iommu_readl(ctx, ARM_SMMU_CB_FSR));
+
+	ret = devm_request_irq(dev, irq,
+			       qcom_iommu_fault,
+			       IRQF_SHARED,
+			       "qcom-iommu-fault",
+			       ctx);
+	if (ret) {
+		dev_err(dev, "failed to request IRQ %u\n", irq);
+		return ret;
+	}
+
+	ret = get_asid(dev->of_node);
+	if (ret < 0) {
+		dev_err(dev, "missing reg property\n");
+		return ret;
+	}
+
+	ctx->asid = ret;
+
+	dev_dbg(dev, "found asid %u\n", ctx->asid);
+
+	qcom_iommu->ctxs[ctx->asid - 1] = ctx;
+
+	return 0;
+}
+
+static int qcom_iommu_ctx_remove(struct platform_device *pdev)
+{
+	struct qcom_iommu_dev *qcom_iommu = dev_get_drvdata(pdev->dev.parent);
+	struct qcom_iommu_ctx *ctx = platform_get_drvdata(pdev);
+
+	platform_set_drvdata(pdev, NULL);
+
+	qcom_iommu->ctxs[ctx->asid - 1] = NULL;
+
+	return 0;
+}
+
+static const struct of_device_id ctx_of_match[] = {
+	{ .compatible = "qcom,msm-iommu-v1-ns" },
+	{ .compatible = "qcom,msm-iommu-v1-sec" },
+	{ /* sentinel */ }
+};
+
+static struct platform_driver qcom_iommu_ctx_driver = {
+	.driver	= {
+		.name		= "qcom-iommu-ctx",
+		.of_match_table	= of_match_ptr(ctx_of_match),
+	},
+	.probe	= qcom_iommu_ctx_probe,
+	.remove = qcom_iommu_ctx_remove,
+};
+
+static int qcom_iommu_device_probe(struct platform_device *pdev)
+{
+	struct device_node *child;
+	struct qcom_iommu_dev *qcom_iommu;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+	int ret, sz, max_asid = 0;
+
+	/* find the max asid (which is 1:1 to ctx bank idx), so we know how
+	 * many child ctx devices we have:
+	 */
+	for_each_child_of_node(dev->of_node, child)
+		max_asid = max(max_asid, get_asid(child));
+
+	sz = sizeof(*qcom_iommu) + (max_asid * sizeof(qcom_iommu->ctxs[0]));
+
+	qcom_iommu = devm_kzalloc(dev, sz, GFP_KERNEL);
+	if (!qcom_iommu)
+		return -ENOMEM;
+	qcom_iommu->num_ctxs = max_asid;
+	qcom_iommu->dev = dev;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (res)
+		qcom_iommu->local_base = devm_ioremap_resource(dev, res);
+
+	qcom_iommu->iface_clk = devm_clk_get(dev, "iface");
+	if (IS_ERR(qcom_iommu->iface_clk)) {
+		dev_err(dev, "failed to get iface clock\n");
+		return PTR_ERR(qcom_iommu->iface_clk);
+	}
+
+	qcom_iommu->bus_clk = devm_clk_get(dev, "bus");
+	if (IS_ERR(qcom_iommu->bus_clk)) {
+		dev_err(dev, "failed to get bus clock\n");
+		return PTR_ERR(qcom_iommu->bus_clk);
+	}
+
+	if (of_property_read_u32(dev->of_node, "qcom,iommu-secure-id",
+				 &qcom_iommu->sec_id)) {
+		dev_err(dev, "missing qcom,iommu-secure-id property\n");
+		return -ENODEV;
+	}
+
+	platform_set_drvdata(pdev, qcom_iommu);
+
+	pm_runtime_enable(dev);
+
+	/* register context bank devices, which are child nodes: */
+	ret = devm_of_platform_populate(dev);
+	if (ret) {
+		dev_err(dev, "Failed to populate iommu contexts\n");
+		return ret;
+	}
+
+	ret = iommu_device_sysfs_add(&qcom_iommu->iommu, dev, NULL,
+				     dev_name(dev));
+	if (ret) {
+		dev_err(dev, "Failed to register iommu in sysfs\n");
+		return ret;
+	}
+
+	iommu_device_set_ops(&qcom_iommu->iommu, &qcom_iommu_ops);
+	iommu_device_set_fwnode(&qcom_iommu->iommu, dev->fwnode);
+
+	ret = iommu_device_register(&qcom_iommu->iommu);
+	if (ret) {
+		dev_err(dev, "Failed to register iommu\n");
+		return ret;
+	}
+
+	bus_set_iommu(&platform_bus_type, &qcom_iommu_ops);
+
+	if (qcom_iommu->local_base) {
+		pm_runtime_get_sync(dev);
+		writel_relaxed(0xffffffff, qcom_iommu->local_base + SMMU_INTR_SEL_NS);
+		pm_runtime_put_sync(dev);
+	}
+
+	return 0;
+}
+
+static int qcom_iommu_device_remove(struct platform_device *pdev)
+{
+	struct qcom_iommu_dev *qcom_iommu = platform_get_drvdata(pdev);
+
+	bus_set_iommu(&platform_bus_type, NULL);
+
+	pm_runtime_force_suspend(&pdev->dev);
+	platform_set_drvdata(pdev, NULL);
+	iommu_device_sysfs_remove(&qcom_iommu->iommu);
+	iommu_device_unregister(&qcom_iommu->iommu);
+
+	return 0;
+}
+
+#ifdef CONFIG_PM
+static int qcom_iommu_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct qcom_iommu_dev *qcom_iommu = platform_get_drvdata(pdev);
+
+	return qcom_iommu_enable_clocks(qcom_iommu);
+}
+
+static int qcom_iommu_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct qcom_iommu_dev *qcom_iommu = platform_get_drvdata(pdev);
+
+	qcom_iommu_disable_clocks(qcom_iommu);
+
+	return 0;
+}
+#endif
+
+static const struct dev_pm_ops qcom_iommu_pm_ops = {
+	SET_RUNTIME_PM_OPS(qcom_iommu_suspend, qcom_iommu_resume, NULL)
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+};
+
+static const struct of_device_id qcom_iommu_of_match[] = {
+	{ .compatible = "qcom,msm-iommu-v1" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, qcom_iommu_of_match);
+
+static struct platform_driver qcom_iommu_driver = {
+	.driver	= {
+		.name		= "qcom-iommu",
+		.of_match_table	= of_match_ptr(qcom_iommu_of_match),
+		.pm		= &qcom_iommu_pm_ops,
+	},
+	.probe	= qcom_iommu_device_probe,
+	.remove	= qcom_iommu_device_remove,
+};
+
+static int __init qcom_iommu_init(void)
+{
+	int ret;
+
+	ret = platform_driver_register(&qcom_iommu_ctx_driver);
+	if (ret)
+		return ret;
+
+	ret = platform_driver_register(&qcom_iommu_driver);
+	if (ret)
+		platform_driver_unregister(&qcom_iommu_ctx_driver);
+
+	return ret;
+}
+
+static void __exit qcom_iommu_exit(void)
+{
+	platform_driver_unregister(&qcom_iommu_driver);
+	platform_driver_unregister(&qcom_iommu_ctx_driver);
+}
+
+module_init(qcom_iommu_init);
+module_exit(qcom_iommu_exit);
+
+IOMMU_OF_DECLARE(qcom_iommu_dev, "qcom,msm-iommu-v1", NULL);
+
+MODULE_DESCRIPTION("IOMMU API for QCOM IOMMU v1 implementations");
+MODULE_LICENSE("GPL v2");
From patchwork Thu Jul 13 12:07:47 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [RESEND,4/4] iommu: qcom: initialize secure page table
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9838373
Message-Id: <20170713120747.20490-5-robdclark@gmail.com>
To: iommu@lists.linux-foundation.org
Cc: linux-arm-msm@vger.kernel.org, Archit Taneja <architt@codeaurora.org>,
 Rob Herring <robh@kernel.org>, Will Deacon <will.deacon@arm.com>,
 Sricharan <sricharan@codeaurora.org>,
 Mark Rutland <mark.rutland@arm.com>, Robin Murphy <robin.murphy@arm.com>,
 Stanimir Varbanov <stanimir.varbanov@linaro.org>,
 Rob Clark <robdclark@gmail.com>
Date: Thu, 13 Jul 2017 08:07:47 -0400

From: Stanimir Varbanov <stanimir.varbanov@linaro.org>

This basically gets the secure page table size, allocates memory for
secure pagetables and passes the physical address to the trusted zone.

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
---
 drivers/iommu/qcom_iommu.c | 64 ++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 64 insertions(+)

diff --git a/drivers/iommu/qcom_iommu.c b/drivers/iommu/qcom_iommu.c
index 860cad1cb167..48b62aa52787 100644
--- a/drivers/iommu/qcom_iommu.c
+++ b/drivers/iommu/qcom_iommu.c
@@ -604,6 +604,51 @@ static void qcom_iommu_disable_clocks(struct qcom_iommu_dev *qcom_iommu)
 	clk_disable_unprepare(qcom_iommu->iface_clk);
 }
 
+static int qcom_iommu_sec_ptbl_init(struct device *dev)
+{
+	size_t psize = 0;
+	unsigned int spare = 0;
+	void *cpu_addr;
+	dma_addr_t paddr;
+	unsigned long attrs;
+	static bool allocated = false;
+	int ret;
+
+	if (allocated)
+		return 0;
+
+	ret = qcom_scm_iommu_secure_ptbl_size(spare, &psize);
+	if (ret) {
+		dev_err(dev, "failed to get iommu secure pgtable size (%d)\n",
+			ret);
+		return ret;
+	}
+
+	dev_info(dev, "iommu sec: pgtable size: %zu\n", psize);
+
+	attrs = DMA_ATTR_NO_KERNEL_MAPPING;
+
+	cpu_addr = dma_alloc_attrs(dev, psize, &paddr, GFP_KERNEL, attrs);
+	if (!cpu_addr) {
+		dev_err(dev, "failed to allocate %zu bytes for pgtable\n",
+			psize);
+		return -ENOMEM;
+	}
+
+	ret = qcom_scm_iommu_secure_ptbl_init(paddr, psize, spare);
+	if (ret) {
+		dev_err(dev, "failed to init iommu pgtable (%d)\n", ret);
+		goto free_mem;
+	}
+
+	allocated = true;
+	return 0;
+
+free_mem:
+	dma_free_attrs(dev, psize, cpu_addr, paddr, attrs);
+	return ret;
+}
+
 static int get_asid(const struct device_node *np)
 {
 	u32 reg;
@@ -700,6 +745,17 @@ static struct platform_driver qcom_iommu_ctx_driver = {
 	.remove = qcom_iommu_ctx_remove,
 };
 
+static bool qcom_iommu_has_secure_context(struct qcom_iommu_dev *qcom_iommu)
+{
+	struct device_node *child;
+
+	for_each_child_of_node(qcom_iommu->dev->of_node, child)
+		if (of_device_is_compatible(child, "qcom,msm-iommu-v1-sec"))
+			return true;
+
+	return false;
+}
+
 static int qcom_iommu_device_probe(struct platform_device *pdev)
 {
 	struct device_node *child;
@@ -744,6 +800,14 @@ static int qcom_iommu_device_probe(struct platform_device *pdev)
 		return -ENODEV;
 	}
 
+	if (qcom_iommu_has_secure_context(qcom_iommu)) {
+		ret = qcom_iommu_sec_ptbl_init(dev);
+		if (ret) {
+			dev_err(dev, "cannot init secure pg table(%d)\n", ret);
+			return ret;
+		}
+	}
+
 	platform_set_drvdata(pdev, qcom_iommu);
 
 	pm_runtime_enable(dev);
From patchwork Mon Jun 12 12:43:15 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [1/3] ARM64: DT: add gpu for msm8916
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9781057
Message-Id: <20170612124317.29313-1-robdclark@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: Stephen Boyd <sboyd@codeaurora.org>, Andy Gross <agross@codeaurora.org>,
 Stanimir Varbanov <stanimir.varbanov@linaro.org>,
 Rob Clark <robdclark@gmail.com>
Date: Mon, 12 Jun 2017 08:43:15 -0400

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 35 +++++++++++++++++++++++++++++++++++
 1 file changed, 35 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index ab30939..24c24ab 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -204,6 +204,17 @@
 
 	};
 
+	gpu_opp_table: opp_table {
+		compatible = "operating-points-v2";
+
+		opp-400000000 {
+			opp-hz = /bits/ 64 <400000000>;
+		};
+		opp-19200000 {
+			opp-hz = /bits/ 64 <19200000>;
+		};
+	};
+
 	timer {
 		compatible = "arm,armv8-timer";
 		interrupts = <GIC_PPI 2 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>,
@@ -698,6 +709,30 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		gpu@1c00000 {
+			compatible = "qcom,adreno-306.0", "qcom,adreno";
+			reg = <0x01c00000 0x20000>;
+			reg-names = "kgsl_3d0_reg_memory";
+			interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "kgsl_3d0_irq";
+			clock-names =
+			    "core",
+			    "iface",
+			    "mem",
+			    "mem_iface",
+			    "alt_mem_iface",
+			    "gfx3d";
+			clocks =
+			    <&gcc GCC_OXILI_GFX3D_CLK>,
+			    <&gcc GCC_OXILI_AHB_CLK>,
+			    <&gcc GCC_OXILI_GMEM_CLK>,
+			    <&gcc GCC_BIMC_GFX_CLK>,
+			    <&gcc GCC_BIMC_GPU_CLK>,
+			    <&gcc GFX3D_CLK_SRC>;
+			power-domains = <&gcc OXILI_GDSC>;
+			operating-points-v2 = <&gpu_opp_table>;
+		};
+
 		mdss: mdss@1a00000 {
 			compatible = "qcom,mdss";
 			reg = <0x1a00000 0x1000>,
From patchwork Mon Jun 12 12:43:16 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [2/3] ARM64: DT: add video codec devicetree node
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9781059
Message-Id: <20170612124317.29313-2-robdclark@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: Stephen Boyd <sboyd@codeaurora.org>, Andy Gross <agross@codeaurora.org>,
 Stanimir Varbanov <stanimir.varbanov@linaro.org>,
 Rob Clark <robdclark@gmail.com>
Date: Mon, 12 Jun 2017 08:43:16 -0400

From: Stanimir Varbanov <stanimir.varbanov@linaro.org>

Signed-off-by: Stanimir Varbanov <stanimir.varbanov@linaro.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 24c24ab..1dcd632 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -88,6 +88,13 @@
 			no-map;
 		};
 
+		venus_mem: venus@89900000 {
+			compatible = "shared-dma-pool";
+			reg = <0x0 0x89900000 0x0 0x800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+
 		mba_mem: mba@8ea00000 {
 			no-map;
 			reg = <0 0x8ea00000 0 0x100000>;
@@ -1214,6 +1221,27 @@
 				};
 			};
 		};
+
+		venus: video-codec@1d00000 {
+			compatible = "qcom,msm8916-venus";
+			reg = <0x01d00000 0xff000>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
+			power-domains = <&gcc VENUS_GDSC>;
+			clocks = <&gcc GCC_VENUS0_VCODEC0_CLK>,
+				 <&gcc GCC_VENUS0_AHB_CLK>,
+				 <&gcc GCC_VENUS0_AXI_CLK>;
+			clock-names = "core", "iface", "bus";
+			memory-region = <&venus_mem>;
+			status = "okay";
+
+			video-decoder {
+				compatible = "venus-decoder";
+			};
+
+			video-encoder {
+				compatible = "venus-encoder";
+			};
+		};
 	};
 
 	smd {
From patchwork Mon Jun 12 12:43:17 2017
Content-Type: text/plain; charset="utf-8"
MIME-Version: 1.0
Content-Transfer-Encoding: 7bit
Subject: [3/3] ARM64: DT: add iommu for msm8916
From: Rob Clark <robdclark@gmail.com>
X-Patchwork-Id: 9781061
Message-Id: <20170612124317.29313-3-robdclark@gmail.com>
To: linux-arm-msm@vger.kernel.org
Cc: Stephen Boyd <sboyd@codeaurora.org>, Andy Gross <agross@codeaurora.org>,
 Stanimir Varbanov <stanimir.varbanov@linaro.org>,
 Rob Clark <robdclark@gmail.com>
Date: Mon, 12 Jun 2017 08:43:17 -0400

Signed-off-by: Rob Clark <robdclark@gmail.com>
Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>
---
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 57 +++++++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 1dcd632..9a1d7ef 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -716,6 +716,59 @@
 			#thermal-sensor-cells = <1>;
 		};
 
+		apps_iommu: iommu@1ef0000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1e20000 0x40000>;
+			reg = <0x1ef0000 0x3000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_APSS_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <17>;
+
+			// mdp_0:
+			iommu-ctx@4000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x4000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// venus_ns:
+			iommu-ctx@5000 {
+				compatible = "qcom,msm-iommu-v1-sec";
+				reg = <0x5000 0x1000>;
+				interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>;
+			};
+		};
+
+		gpu_iommu: iommu@1f08000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			#iommu-cells = <1>;
+			compatible = "qcom,msm8916-iommu", "qcom,msm-iommu-v1";
+			ranges = <0 0x1f08000 0x10000>;
+			clocks = <&gcc GCC_SMMU_CFG_CLK>,
+				 <&gcc GCC_GFX_TCU_CLK>;
+			clock-names = "iface", "bus";
+			qcom,iommu-secure-id = <18>;
+
+			// gfx3d_user:
+			iommu-ctx@1000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x1000 0x1000>;
+				interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>;
+			};
+
+			// gfx3d_priv:
+			iommu-ctx@2000 {
+				compatible = "qcom,msm-iommu-v1-ns";
+				reg = <0x2000 0x1000>;
+				interrupts = <GIC_SPI 242 0>;
+			};
+		};
+
 		gpu@1c00000 {
 			compatible = "qcom,adreno-306.0", "qcom,adreno";
 			reg = <0x01c00000 0x20000>;
@@ -738,6 +791,7 @@
 			    <&gcc GFX3D_CLK_SRC>;
 			power-domains = <&gcc OXILI_GDSC>;
 			operating-points-v2 = <&gpu_opp_table>;
+			iommus = <&gpu_iommu 1>, <&gpu_iommu 2>;
 		};
 
 		mdss: mdss@1a00000 {
@@ -781,6 +835,8 @@
 					      "core_clk",
 					      "vsync_clk";
 
+				iommus = <&apps_iommu 4>;
+
 				ports {
 					#address-cells = <1>;
 					#size-cells = <0>;
@@ -1231,6 +1287,7 @@
 				 <&gcc GCC_VENUS0_AHB_CLK>,
 				 <&gcc GCC_VENUS0_AXI_CLK>;
 			clock-names = "core", "iface", "bus";
+			iommus = <&apps_iommu 5>;
 			memory-region = <&venus_mem>;
 			status = "okay";