1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
|
From a2858804c7f5f4585b718543236b7ba3b3ec813a Mon Sep 17 00:00:00 2001
From: Peter Robinson <pbrobinson@gmail.com>
Date: Mon, 29 Aug 2016 09:14:15 +0100
Subject: [PATCH] ARM: bcm283x: Add devicetree for the Raspberry Pi 3.
For now this doesn't support the new hardware present on the Pi 3 (BT,
wifi, GPIO expander).
Rebased to the patch that went upstream for ARM64
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 30 ++++++++++++++
arch/arm/boot/dts/bcm2837.dtsi | 76 +++++++++++++++++++++++++++++++++++
3 files changed, 108 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts
create mode 100644 arch/arm/boot/dts/bcm2837.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index faacd52..ec41888 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -69,7 +69,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \
bcm2835-rpi-b-rev2.dtb \
bcm2835-rpi-b-plus.dtb \
bcm2835-rpi-a-plus.dtb \
- bcm2836-rpi-2-b.dtb
+ bcm2836-rpi-2-b.dtb \
+ bcm2837-rpi-3-b.dtb
dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm4708-asus-rt-ac56u.dtb \
bcm4708-asus-rt-ac68u.dtb \
diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
new file mode 100644
index 0000000..7841b72
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts
@@ -0,0 +1,30 @@
+/dts-v1/;
+#include "bcm2837.dtsi"
+#include "bcm2835-rpi.dtsi"
+#include "bcm283x-rpi-smsc9514.dtsi"
+
+/ {
+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837";
+ model = "Raspberry Pi 3 Model B";
+
+ memory {
+ reg = <0 0x40000000>;
+ };
+
+ leds {
+ act {
+ gpios = <&gpio 47 0>;
+ };
+
+ pwr {
+ label = "PWR";
+ gpios = <&gpio 35 0>;
+ default-state = "keep";
+ linux,default-trigger = "default-on";
+ };
+ };
+};
+
+&uart1 {
+ status = "okay";
+};
diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi
new file mode 100644
index 0000000..8216bbb
--- /dev/null
+++ b/arch/arm/boot/dts/bcm2837.dtsi
@@ -0,0 +1,76 @@
+#include "bcm283x.dtsi"
+
+/ {
+ compatible = "brcm,bcm2836";
+
+ soc {
+ ranges = <0x7e000000 0x3f000000 0x1000000>,
+ <0x40000000 0x40000000 0x00001000>;
+ dma-ranges = <0xc0000000 0x00000000 0x3f000000>;
+
+ local_intc: local_intc {
+ compatible = "brcm,bcm2836-l1-intc";
+ reg = <0x40000000 0x100>;
+ interrupt-controller;
+ #interrupt-cells = <1>;
+ interrupt-parent = <&local_intc>;
+ };
+ };
+
+ timer {
+ compatible = "arm,armv7-timer";
+ interrupt-parent = <&local_intc>;
+ interrupts = <0>, // PHYS_SECURE_PPI
+ <1>, // PHYS_NONSECURE_PPI
+ <3>, // VIRT_PPI
+ <2>; // HYP_PPI
+ always-on;
+ };
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000d8>;
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <1>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000e0>;
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <2>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000e8>;
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <3>;
+ enable-method = "spin-table";
+ cpu-release-addr = <0x0 0x000000f0>;
+ };
+ };
+};
+
+/* Make the BCM2835-style global interrupt controller be a child of the
+ * CPU-local interrupt controller.
+ */
+&intc {
+ compatible = "brcm,bcm2836-armctrl-ic";
+ reg = <0x7e00b200 0x200>;
+ interrupt-parent = <&local_intc>;
+ interrupts = <8>;
+};
--
2.9.3
From accfa15f3aef0dfca46d0eee02c1846c9b230fd5 Mon Sep 17 00:00:00 2001
From: Eric Anholt <eric@anholt.net>
Date: Wed, 14 Sep 2016 19:21:29 +0100
Subject: [PATCH] drm/vc4: Fall back to using an EDID probe in the absence of a
GPIO.
On Pi0/1/2, we use an external GPIO line for hotplug detection, since
the HDMI_HOTPLUG register isn't connected to anything. However, with
the Pi3 the HPD GPIO line has moved off to a GPIO expander that will
be tricky to get to (the firmware is constantly polling the expander
using i2c0, so we'll need to coordinate with it).
As a stop-gap, if we don't have a GPIO line, use an EDID probe to
detect connection. Fixes HDMI display on the pi3.
Signed-off-by: Eric Anholt <eric@anholt.net>
---
drivers/gpu/drm/vc4/vc4_hdmi.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/drivers/gpu/drm/vc4/vc4_hdmi.c b/drivers/gpu/drm/vc4/vc4_hdmi.c
index 4452f36..5adc0c7 100644
--- a/drivers/gpu/drm/vc4/vc4_hdmi.c
+++ b/drivers/gpu/drm/vc4/vc4_hdmi.c
@@ -174,6 +174,9 @@ vc4_hdmi_connector_detect(struct drm_connector *connector, bool force)
return connector_status_disconnected;
}
+ if (drm_probe_ddc(vc4->hdmi->ddc))
+ return connector_status_connected;
+
if (HDMI_READ(VC4_HDMI_HOTPLUG) & VC4_HDMI_HOTPLUG_CONNECTED)
return connector_status_connected;
else
--
2.9.3
|
