path: root/arm-hikey-fixWiFi.patch

From c477ebe21fabe0010a2ed324ce3a1762c757d867 Mon Sep 17 00:00:00 2001
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Sat, 6 May 2017 11:41:30 +0200
Subject: [PATCH 179/554] mmc: dt: pwrseq-simple: Invent power-off-delay-us

During power off, after the GPIO pin has been asserted, some devices like
the Wifi chip from TI, Wl18xx, needs a delay before the host continues with
clock gating and turning off regulators as to follow a graceful shutdown
sequence.

Therefore invent an optional power-off-delay-us DT binding for
mmc-pwrseq-simple, to allow us to support this constraint.

Cc: devicetree@vger.kernel.org
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mmc@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index e25436861867..9029b45b8a22 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -18,6 +18,8 @@ Optional properties:
   "ext_clock" (External clock provided to the card).
 - post-power-on-delay-ms : Delay in ms after powering the card and
 	de-asserting the reset-gpios (if any)
+- power-off-delay-us : Delay in us after asserting the reset-gpios (if any)
+	during power off of the card.
 
 Example:
 
-- 
2.13.0

From e9256e142f597edf90c68cec22db4c4aebaa27de Mon Sep 17 00:00:00 2001
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Sat, 6 May 2017 11:43:05 +0200
Subject: [PATCH 180/554] mmc: pwrseq_simple: Parse DTS for the
 power-off-delay-us property

If the optional power-off-delay-us property is found, insert the
corresponding delay after asserting the GPIO during power off. This enables
a graceful shutdown sequence for some devices.

Cc: linux-mmc@vger.kernel.org
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 drivers/mmc/core/pwrseq_simple.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/mmc/core/pwrseq_simple.c b/drivers/mmc/core/pwrseq_simple.c
index 1304160de168..13ef162cf066 100644
--- a/drivers/mmc/core/pwrseq_simple.c
+++ b/drivers/mmc/core/pwrseq_simple.c
@@ -27,6 +27,7 @@ struct mmc_pwrseq_simple {
 	struct mmc_pwrseq pwrseq;
 	bool clk_enabled;
 	u32 post_power_on_delay_ms;
+	u32 power_off_delay_us;
 	struct clk *ext_clk;
 	struct gpio_descs *reset_gpios;
 };
@@ -78,6 +79,10 @@ static void mmc_pwrseq_simple_power_off(struct mmc_host *host)
 
 	mmc_pwrseq_simple_set_gpios_value(pwrseq, 1);
 
+	if (pwrseq->power_off_delay_us)
+		usleep_range(pwrseq->power_off_delay_us,
+			2 * pwrseq->power_off_delay_us);
+
 	if (!IS_ERR(pwrseq->ext_clk) && pwrseq->clk_enabled) {
 		clk_disable_unprepare(pwrseq->ext_clk);
 		pwrseq->clk_enabled = false;
@@ -119,6 +124,8 @@ static int mmc_pwrseq_simple_probe(struct platform_device *pdev)
 
 	device_property_read_u32(dev, "post-power-on-delay-ms",
 				 &pwrseq->post_power_on_delay_ms);
+	device_property_read_u32(dev, "power-off-delay-us",
+				 &pwrseq->power_off_delay_us);
 
 	pwrseq->pwrseq.dev = dev;
 	pwrseq->pwrseq.ops = &mmc_pwrseq_simple_ops;
-- 
2.13.0

From f74ac688c981138c914f9afba50b646146e35585 Mon Sep 17 00:00:00 2001
From: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Mon, 24 Apr 2017 22:40:22 +0200
Subject: [PATCH 181/554] mfd: dts: hi655x: Add clock binding for the pmic

The hi655x PMIC provides the regulators but also a clock. The latter is
missing in the definition, so extend the documentation to include this as
well.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
[Ulf: Split patch and updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
index 05485699d70e..9630ac0e4b56 100644
--- a/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
+++ b/Documentation/devicetree/bindings/mfd/hisilicon,hi655x.txt
@@ -16,6 +16,11 @@ Required properties:
 - reg:                  Base address of PMIC on Hi6220 SoC.
 - interrupt-controller: Hi655x has internal IRQs (has own IRQ domain).
 - pmic-gpios:           The GPIO used by PMIC IRQ.
+- #clock-cells:		From common clock binding; shall be set to 0
+
+Optional properties:
+- clock-output-names: From common clock binding to override the
+  default output clock name
 
 Example:
 	pmic: pmic@f8000000 {
@@ -24,4 +29,5 @@ Example:
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
+		#clock-cells = <0>;
 	}
-- 
2.13.0

From 307ded8968868e55343e063fbe96cff1efd77eb6 Mon Sep 17 00:00:00 2001
From: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Mon, 24 Apr 2017 22:40:22 +0200
Subject: [PATCH 182/554] arm64: dts: hikey: Add clock for the pmic mfd

The hi655x PMIC provides the regulators but also a clock. The latter is
missing so let's add it. This clock is used by WiFi/Bluetooth chip, but
that connection is done in a separate change on top of this one.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Rob Herring <robh@kernel.org>
Acked-by: Lee Jones <lee.jones@linaro.org>
[Ulf: Split patch and updated changelog]
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 1 +
 1 file changed, 1 insertion(+)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 75bce2d0b1a8..d22eb3a646c4 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -330,6 +330,7 @@
 	pmic: pmic@f8000000 {
 		compatible = "hisilicon,hi655x-pmic";
 		reg = <0x0 0xf8000000 0x0 0x1000>;
+		#clock-cells = <0>;
 		interrupt-controller;
 		#interrupt-cells = <2>;
 		pmic-gpios = <&gpio1 2 GPIO_ACTIVE_HIGH>;
-- 
2.13.0

From 1b32a5ff98fbb271d2235ddcfe3b58f514f8260a Mon Sep 17 00:00:00 2001
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Wed, 3 May 2017 12:46:55 +0200
Subject: [PATCH 183/554] arm64: dts: hi6220: Move the fixed_5v_hub regulator
 to the hikey dts

The regulator is a part of the hikey board, therefore let's move it from
the hi6220 SoC dtsi file into the hikey dts file . Let's also rename the
regulator according to the datasheet (5V_HUB) to better reflect the HW.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 10 ++++++++++
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 12 +-----------
 2 files changed, 11 insertions(+), 11 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index d22eb3a646c4..0f6cba77fc76 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -81,6 +81,16 @@
 		};
 	};
 
+	reg_5v_hub: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "5V_HUB";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		gpio = <&gpio0 7 0>;
+		regulator-always-on;
+	};
+
 	soc {
 		spi0: spi@f7106000 {
 			status = "ok";
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 1e5129b19280..951152d44c02 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -725,20 +725,10 @@
 			status = "disabled";
 		};
 
-		fixed_5v_hub: regulator@0 {
-			compatible = "regulator-fixed";
-			regulator-name = "fixed_5v_hub";
-			regulator-min-microvolt = <5000000>;
-			regulator-max-microvolt = <5000000>;
-			regulator-boot-on;
-			gpio = <&gpio0 7 0>;
-			regulator-always-on;
-		};
-
 		usb_phy: usbphy {
 			compatible = "hisilicon,hi6220-usb-phy";
 			#phy-cells = <0>;
-			phy-supply = <&fixed_5v_hub>;
+			phy-supply = <&reg_5v_hub>;
 			hisilicon,peripheral-syscon = <&sys_ctrl>;
 		};
 
-- 
2.13.0

From 84f7c60b31f10e3a438153bc7408ad536f585641 Mon Sep 17 00:00:00 2001
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Wed, 3 May 2017 13:51:27 +0200
Subject: [PATCH 184/554] arm64: dts: hikey: Add the SYS_5V and the VDD_3V3
 regulators

Add these regulators to better describe the HW, but also because those is
needed in following changes.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 22 +++++++++++++++++++++-
 1 file changed, 21 insertions(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 0f6cba77fc76..802f4a4bed30 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -81,7 +81,26 @@
 		};
 	};
 
-	reg_5v_hub: regulator@0 {
+	reg_sys_5v: regulator@0 {
+		compatible = "regulator-fixed";
+		regulator-name = "SYS_5V";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_vdd_3v3: regulator@1 {
+		compatible = "regulator-fixed";
+		regulator-name = "VDD_3V3";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
+	};
+
+	reg_5v_hub: regulator@2 {
 		compatible = "regulator-fixed";
 		regulator-name = "5V_HUB";
 		regulator-min-microvolt = <5000000>;
@@ -89,6 +108,7 @@
 		regulator-boot-on;
 		gpio = <&gpio0 7 0>;
 		regulator-always-on;
+		vin-supply = <&reg_sys_5v>;
 	};
 
 	soc {
-- 
2.13.0

From 76f1dfb687150e852aa74573962cfc158a9570cc Mon Sep 17 00:00:00 2001
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Wed, 3 May 2017 14:18:26 +0200
Subject: [PATCH 185/554] arm64: dts: hi6220: Move board data from the dwmmc
 nodes to hikey dts

Move the board specific descriptions for the dwmmc nodes in the hi6220 SoC
dtsi, into the hikey dts as it's there these belongs.

While changing this, let's take the opportunity to drop the use of the
"ti,non-removable" binding for one of the dwmmc device nodes, as it's not a
valid binding and not used. Drop also the unnecessary use of "num-slots =
<0x1>" for all of the dwmmc nodes, as there is no need to set this since
when default number of slots is one.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 23 ++++++++++++++++++++++-
 arch/arm64/boot/dts/hisilicon/hi6220.dtsi      | 19 -------------------
 2 files changed, 22 insertions(+), 20 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 802f4a4bed30..5132d8ed4664 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -286,8 +286,29 @@
 
 		/* GPIO blocks 16 thru 19 do not appear to be routed to pins */
 
+		dwmmc_0: dwmmc0@f723d000 {
+			cap-mmc-highspeed;
+			non-removable;
+			bus-width = <0x8>;
+			vmmc-supply = <&ldo19>;
+		};
+
+		dwmmc_1: dwmmc1@f723e000 {
+			card-detect-delay = <200>;
+			cap-sd-highspeed;
+			sd-uhs-sdr12;
+			sd-uhs-sdr25;
+			sd-uhs-sdr50;
+			vqmmc-supply = <&ldo7>;
+			vmmc-supply = <&ldo10>;
+			bus-width = <0x4>;
+			disable-wp;
+			cd-gpios = <&gpio1 0 1>;
+		};
+
 		dwmmc_2: dwmmc2@f723f000 {
-			ti,non-removable;
+			broken-cd;
+			bus-width = <0x4>;
 			non-removable;
 			/* WL_EN */
 			vmmc-supply = <&wlan_en_reg>;
diff --git a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
index 951152d44c02..5013e4b2ea71 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
+++ b/arch/arm64/boot/dts/hisilicon/hi6220.dtsi
@@ -756,17 +756,12 @@
 
 		dwmmc_0: dwmmc0@f723d000 {
 			compatible = "hisilicon,hi6220-dw-mshc";
-			num-slots = <0x1>;
-			cap-mmc-highspeed;
-			non-removable;
 			reg = <0x0 0xf723d000 0x0 0x1000>;
 			interrupts = <0x0 0x48 0x4>;
 			clocks = <&sys_ctrl 2>, <&sys_ctrl 1>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC0>;
 			reset-names = "reset";
-			bus-width = <0x8>;
-			vmmc-supply = <&ldo19>;
 			pinctrl-names = "default";
 			pinctrl-0 = <&emmc_pmx_func &emmc_clk_cfg_func
 				     &emmc_cfg_func &emmc_rst_cfg_func>;
@@ -774,13 +769,7 @@
 
 		dwmmc_1: dwmmc1@f723e000 {
 			compatible = "hisilicon,hi6220-dw-mshc";
-			num-slots = <0x1>;
-			card-detect-delay = <200>;
 			hisilicon,peripheral-syscon = <&ao_ctrl>;
-			cap-sd-highspeed;
-			sd-uhs-sdr12;
-			sd-uhs-sdr25;
-			sd-uhs-sdr50;
 			reg = <0x0 0xf723e000 0x0 0x1000>;
 			interrupts = <0x0 0x49 0x4>;
 			#address-cells = <0x1>;
@@ -789,11 +778,6 @@
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC1>;
 			reset-names = "reset";
-			vqmmc-supply = <&ldo7>;
-			vmmc-supply = <&ldo10>;
-			bus-width = <0x4>;
-			disable-wp;
-			cd-gpios = <&gpio1 0 1>;
 			pinctrl-names = "default", "idle";
 			pinctrl-0 = <&sd_pmx_func &sd_clk_cfg_func &sd_cfg_func>;
 			pinctrl-1 = <&sd_pmx_idle &sd_clk_cfg_idle &sd_cfg_idle>;
@@ -801,15 +785,12 @@
 
 		dwmmc_2: dwmmc2@f723f000 {
 			compatible = "hisilicon,hi6220-dw-mshc";
-			num-slots = <0x1>;
 			reg = <0x0 0xf723f000 0x0 0x1000>;
 			interrupts = <0x0 0x4a 0x4>;
 			clocks = <&sys_ctrl HI6220_MMC2_CIUCLK>, <&sys_ctrl HI6220_MMC2_CLK>;
 			clock-names = "ciu", "biu";
 			resets = <&sys_ctrl PERIPH_RSTDIS0_MMC2>;
 			reset-names = "reset";
-			bus-width = <0x4>;
-			broken-cd;
 			pinctrl-names = "default", "idle";
 			pinctrl-0 = <&sdio_pmx_func &sdio_clk_cfg_func &sdio_cfg_func>;
 			pinctrl-1 = <&sdio_pmx_idle &sdio_clk_cfg_idle &sdio_cfg_idle>;
-- 
2.13.0

From ea452678734eb782126f999bf5c4fb3e71d3b196 Mon Sep 17 00:00:00 2001
From: Ulf Hansson <ulf.hansson@linaro.org>
Date: Wed, 3 May 2017 16:11:33 +0200
Subject: [PATCH 186/554] arm64: dts: hikey: Fix WiFi support

The description of the connection between the dwmmc (SDIO) controller and
the Wifi chip, which is attached to the SDIO bus is wrong. Currently the
SDIO card can't be detected and thus the Wifi doesn't work.

Let's fix this by assigning the correct vmmc supply, which is the always on
regulator VDD_3V3 and remove the WLAN enable regulator altogether. Then to
properly deal with the power on/off sequence, add a mmc-pwrseq node to
describe the resources needed to detect the SDIO card.

Except for the WLAN enable GPIO and its corresponding assert/de-assert
delays, the mmc-pwrseq node also contains a handle to a clock provided by
the hi655x pmic. This clock is also needed to be able to turn on the WiFi
chip.

Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
---
 arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts | 26 +++++++++++---------------
 1 file changed, 11 insertions(+), 15 deletions(-)

diff --git a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
index 5132d8ed4664..49f6a6242cf9 100644
--- a/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
+++ b/arch/arm64/boot/dts/hisilicon/hi6220-hikey.dts
@@ -111,6 +111,15 @@
 		vin-supply = <&reg_sys_5v>;
 	};
 
+	wl1835_pwrseq: wl1835-pwrseq {
+		compatible = "mmc-pwrseq-simple";
+		/* WLAN_EN GPIO */
+		reset-gpios = <&gpio0 5 GPIO_ACTIVE_LOW>;
+		clocks = <&pmic>;
+		clock-names = "ext_clock";
+		power-off-delay-us = <10>;
+	};
+
 	soc {
 		spi0: spi@f7106000 {
 			status = "ok";
@@ -307,11 +316,10 @@
 		};
 
 		dwmmc_2: dwmmc2@f723f000 {
-			broken-cd;
 			bus-width = <0x4>;
 			non-removable;
-			/* WL_EN */
-			vmmc-supply = <&wlan_en_reg>;
+			vmmc-supply = <&reg_vdd_3v3>;
+			mmc-pwrseq = <&wl1835_pwrseq>;
 
 			#address-cells = <0x1>;
 			#size-cells = <0x0>;
@@ -323,18 +331,6 @@
 				interrupts = <3 IRQ_TYPE_EDGE_RISING>;
 			};
 		};
-
-		wlan_en_reg: regulator@1 {
-			compatible = "regulator-fixed";
-			regulator-name = "wlan-en-regulator";
-			regulator-min-microvolt = <1800000>;
-			regulator-max-microvolt = <1800000>;
-			/* WLAN_EN GPIO */
-			gpio = <&gpio0 5 0>;
-			/* WLAN card specific delay */
-			startup-delay-us = <70000>;
-			enable-active-high;
-		};
 	};
 
 	leds {
-- 
2.13.0