path: root/alps.patch

From d4b347b29b4d14647c7394f7167bf6785dc98e50 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Mon, 7 Nov 2011 19:53:15 -0800
Subject: [PATCH 1/6] Input: ALPS - move protocol information to Documentation

In preparation for new protocol support, move the protocol
information currently documented in alps.c to
Documentation/input/alps.txt, where it can be expanded without
cluttering up the driver.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 Documentation/input/alps.txt |   75 ++++++++++++++++++++++++++++++++++++++++++
 drivers/input/mouse/alps.c   |   37 +--------------------
 2 files changed, 76 insertions(+), 36 deletions(-)
 create mode 100644 Documentation/input/alps.txt

diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
new file mode 100644
index 0000000..ab5478f
--- /dev/null
+++ b/Documentation/input/alps.txt
@@ -0,0 +1,75 @@
+ALPS Touchpad Protocol
+----------------------
+
+Introduction
+------------
+
+Currently the ALPS touchpad driver supports two protocol versions in use by
+ALPS touchpads, the "old" and "new" protocol versions. Fundamentally these
+differ only in the format of their event packets (in reality many features may
+be found on new protocol devices that aren't found on the old protocol
+devices, but these are handled transparently as feature differences rather
+than protocol differences).
+
+Detection
+---------
+
+All ALPS touchpads should respond to the "E6 report" command sequence:
+E8-E6-E6-E6-E9. An ALPS touchpad should respond with either 00-00-0A or
+00-00-64.
+
+If the E6 report is successful, the touchpad model is identified using the "E7
+report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
+matched against known models in the alps_model_data_array.
+
+Packet Format
+-------------
+
+In the following tables, the following notation us used.
+
+ CAPITALS = stick, miniscules = touchpad
+
+?'s can have different meanings on different models, such as wheel rotation,
+extra buttons, stick buttons on a dualpoint, etc.
+
+PS/2 packet format
+------------------
+
+ byte 0:  0    0 YSGN XSGN    1    M    R    L
+ byte 1: X7   X6   X5   X4   X3   X2   X1   X0
+ byte 2: Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+
+Note that the device never signals overflow condition.
+
+ALPS Absolute Mode - Old Format
+-------------------------------
+
+ byte 0:  1    0    0    0    1   x9   x8   x7
+ byte 1:  0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:  0    ?    ?    l    r    ?  fin  ges
+ byte 3:  0    ?    ?    ?    ?   y9   y8   y7
+ byte 4:  0   y6   y5   y4   y3   y2   y1   y0
+ byte 5:  0   z6   z5   z4   z3   z2   z1   z0
+
+ALPS Absolute Mode - New Format
+-------------------------------
+
+ byte 0:  1    ?    ?    ?    1    ?    ?    ?
+ byte 1:  0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:  0  x10   x9   x8   x7    ?  fin  ges
+ byte 3:  0   y9   y8   y7    1    M    R    L
+ byte 4:  0   y6   y5   y4   y3   y2   y1   y0
+ byte 5:  0   z6   z5   z4   z3   z2   z1   z0
+
+Dualpoint device -- interleaved packet format
+---------------------------------------------
+
+ byte 0:    1    1    0    0    1    1    1    1
+ byte 1:    0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:    0  x10   x9   x8   x7    0  fin  ges
+ byte 3:    0    0 YSGN XSGN    1    1    1    1
+ byte 4:   X7   X6   X5   X4   X3   X2   X1   X0
+ byte 5:   Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
+ byte 6:    0   y9   y8   y7    1    m    r    l
+ byte 7:    0   y6   y5   y4   y3   y2   y1   y0
+ byte 8:    0   z6   z5   z4   z3   z2   z1   z0
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 003587c..19d0943 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -67,42 +67,7 @@ static const struct alps_model_info alps_model_data[] = {
  * isn't valid per PS/2 spec.
  */
 
-/*
- * PS/2 packet format
- *
- * byte 0:  0    0 YSGN XSGN    1    M    R    L
- * byte 1: X7   X6   X5   X4   X3   X2   X1   X0
- * byte 2: Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
- *
- * Note that the device never signals overflow condition.
- *
- * ALPS absolute Mode - new format
- *
- * byte 0:  1    ?    ?    ?    1    ?    ?    ?
- * byte 1:  0   x6   x5   x4   x3   x2   x1   x0
- * byte 2:  0  x10   x9   x8   x7    ?  fin  ges
- * byte 3:  0   y9   y8   y7    1    M    R    L
- * byte 4:  0   y6   y5   y4   y3   y2   y1   y0
- * byte 5:  0   z6   z5   z4   z3   z2   z1   z0
- *
- * Dualpoint device -- interleaved packet format
- *
- * byte 0:    1    1    0    0    1    1    1    1
- * byte 1:    0   x6   x5   x4   x3   x2   x1   x0
- * byte 2:    0  x10   x9   x8   x7    0  fin  ges
- * byte 3:    0    0 YSGN XSGN    1    1    1    1
- * byte 4:   X7   X6   X5   X4   X3   X2   X1   X0
- * byte 5:   Y7   Y6   Y5   Y4   Y3   Y2   Y1   Y0
- * byte 6:    0   y9   y8   y7    1    m    r    l
- * byte 7:    0   y6   y5   y4   y3   y2   y1   y0
- * byte 8:    0   z6   z5   z4   z3   z2   z1   z0
- *
- * CAPITALS = stick, miniscules = touchpad
- *
- * ?'s can have different meanings on different models,
- * such as wheel rotation, extra buttons, stick buttons
- * on a dualpoint, etc.
- */
+/* Packet formats are described in Documentation/input/alps.txt */
 
 static bool alps_is_valid_first_byte(const struct alps_model_info *model,
 				     unsigned char data)
-- 
1.7.7.3


From fa629ef5222193214da9a2b3c94369f79353bec9 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Mon, 7 Nov 2011 19:53:24 -0800
Subject: [PATCH 2/6] Input: ALPS - add protocol version field in
 alps_model_info

In preparation for adding support for more ALPS protocol versions,
add a field for the protocol version to the model info instead of
using a field in the flags. OLDPROTO and !OLDPROTO are now called
version 1 and version 2, repsectively.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c |   47 +++++++++++++++++++++----------------------
 drivers/input/mouse/alps.h |    4 +++
 2 files changed, 27 insertions(+), 24 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 19d0943..77b776d 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -23,7 +23,6 @@
 #include "psmouse.h"
 #include "alps.h"
 
-#define ALPS_OLDPROTO		0x01	/* old style input */
 #define ALPS_DUALPOINT		0x02	/* touchpad has trackstick */
 #define ALPS_PASS		0x04	/* device has a pass-through port */
 
@@ -35,30 +34,30 @@
 					   6-byte ALPS packet */
 
 static const struct alps_model_info alps_model_data[] = {
-	{ { 0x32, 0x02, 0x14 },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
-	{ { 0x33, 0x02, 0x0a },	0x88, 0xf8, ALPS_OLDPROTO },		  /* UMAX-530T */
-	{ { 0x53, 0x02, 0x0a },	0xf8, 0xf8, 0 },
-	{ { 0x53, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-	{ { 0x60, 0x03, 0xc8 }, 0xf8, 0xf8, 0 },			  /* HP ze1115 */
-	{ { 0x63, 0x02, 0x0a },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x14 },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x28 },	0xf8, 0xf8, ALPS_FW_BK_2 },		  /* Fujitsu Siemens S6010 */
-	{ { 0x63, 0x02, 0x3c },	0x8f, 0x8f, ALPS_WHEEL },		  /* Toshiba Satellite S2400-103 */
-	{ { 0x63, 0x02, 0x50 },	0xef, 0xef, ALPS_FW_BK_1 },		  /* NEC Versa L320 */
-	{ { 0x63, 0x02, 0x64 },	0xf8, 0xf8, 0 },
-	{ { 0x63, 0x03, 0xc8 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
-	{ { 0x73, 0x00, 0x0a },	0xf8, 0xf8, ALPS_DUALPOINT },		  /* ThinkPad R61 8918-5QG */
-	{ { 0x73, 0x02, 0x0a },	0xf8, 0xf8, 0 },
-	{ { 0x73, 0x02, 0x14 },	0xf8, 0xf8, ALPS_FW_BK_2 },		  /* Ahtec Laptop */
-	{ { 0x20, 0x02, 0x0e },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
-	{ { 0x22, 0x02, 0x0a },	0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
-	{ { 0x22, 0x02, 0x14 }, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
+	{ { 0x32, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
+	{ { 0x33, 0x02, 0x0a },	ALPS_PROTO_V1, 0x88, 0xf8, 0 },				 /* UMAX-530T */
+	{ { 0x53, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x53, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x60, 0x03, 0xc8 }, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },				 /* HP ze1115 */
+	{ { 0x63, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x63, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x63, 0x02, 0x28 },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		 /* Fujitsu Siemens S6010 */
+	{ { 0x63, 0x02, 0x3c },	ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL },		 /* Toshiba Satellite S2400-103 */
+	{ { 0x63, 0x02, 0x50 },	ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 },		 /* NEC Versa L320 */
+	{ { 0x63, 0x02, 0x64 },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x63, 0x03, 0xc8 }, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
+	{ { 0x73, 0x00, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT },		 /* ThinkPad R61 8918-5QG */
+	{ { 0x73, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x73, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		 /* Ahtec Laptop */
+	{ { 0x20, 0x02, 0x0e },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
+	{ { 0x22, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
+	{ { 0x22, 0x02, 0x14 }, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
 	/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
-	{ { 0x62, 0x02, 0x14 }, 0xcf, 0xcf,
+	{ { 0x62, 0x02, 0x14 }, ALPS_PROTO_V2, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
-	{ { 0x73, 0x02, 0x50 }, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },	  /* Dell Vostro 1400 */
-	{ { 0x52, 0x01, 0x14 }, 0xff, 0xff,
-		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },	  /* Toshiba Tecra A11-11L */
+	{ { 0x73, 0x02, 0x50 }, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },		 /* Dell Vostro 1400 */
+	{ { 0x52, 0x01, 0x14 }, ALPS_PROTO_V2, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },			 /* Toshiba Tecra A11-11L */
 };
 
 /*
@@ -112,7 +111,7 @@ static void alps_process_packet(struct psmouse *psmouse)
 	int x, y, z, ges, fin, left, right, middle;
 	int back = 0, forward = 0;
 
-	if (model->flags & ALPS_OLDPROTO) {
+	if (model->proto_version == ALPS_PROTO_V1) {
 		left = packet[2] & 0x10;
 		right = packet[2] & 0x08;
 		middle = 0;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 904ed8b..4ce9bba 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -12,8 +12,12 @@
 #ifndef _ALPS_H
 #define _ALPS_H
 
+#define ALPS_PROTO_V1	0
+#define ALPS_PROTO_V2	1
+
 struct alps_model_info {
         unsigned char signature[3];
+	unsigned char proto_version;
         unsigned char byte0, mask0;
         unsigned char flags;
 };
-- 
1.7.7.3


From b46615fe9215214ac00e26d35fc54dbe1c510803 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Mon, 7 Nov 2011 19:53:30 -0800
Subject: [PATCH 3/6] Input: ALPS - remove assumptions about packet size

In preparation for version 4 protocol support, which has 8-byte
data packets, remove all hard-coded assumptions about packet size
and use psmouse->pktsize instead.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c |   10 +++++-----
 1 files changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 77b776d..44a0a71 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -308,7 +308,7 @@ static void alps_flush_packet(unsigned long data)
 
 	serio_pause_rx(psmouse->ps2dev.serio);
 
-	if (psmouse->pktcnt == 6) {
+	if (psmouse->pktcnt == psmouse->pktsize) {
 
 		/*
 		 * We did not any more data in reasonable amount of time.
@@ -359,8 +359,8 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 		return PSMOUSE_BAD_DATA;
 	}
 
-	/* Bytes 2 - 6 should have 0 in the highest bit */
-	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= 6 &&
+	/* Bytes 2 - pktsize should have 0 in the highest bit */
+	if (psmouse->pktcnt >= 2 && psmouse->pktcnt <= psmouse->pktsize &&
 	    (psmouse->packet[psmouse->pktcnt - 1] & 0x80)) {
 		psmouse_dbg(psmouse, "refusing packet[%i] = %x\n",
 			    psmouse->pktcnt - 1,
@@ -368,7 +368,7 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 		return PSMOUSE_BAD_DATA;
 	}
 
-	if (psmouse->pktcnt == 6) {
+	if (psmouse->pktcnt == psmouse->pktsize) {
 		alps_process_packet(psmouse);
 		return PSMOUSE_FULL_PACKET;
 	}
@@ -529,7 +529,7 @@ static int alps_tap_mode(struct psmouse *psmouse, int enable)
 static int alps_poll(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
-	unsigned char buf[6];
+	unsigned char buf[sizeof(psmouse->packet)];
 	bool poll_failed;
 
 	if (priv->i->flags & ALPS_PASS)
-- 
1.7.7.3


From 25bded7cd60fa460e520e9f819bd06f4c5cb53f0 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Mon, 7 Nov 2011 19:53:36 -0800
Subject: [PATCH 4/6] Input: ALPS - add support for protocol versions 3 and 4

This patch adds support for two ALPS touchpad protocols not
supported currently by the driver, which I am arbitrarily naming
version 3 and version 4. Support is single-touch only at this time,
although both protocols are capable of limited multitouch support.

Thanks to Andrew Skalski, who did the initial reverse-engineering
of the v3 protocol.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c    |  791 +++++++++++++++++++++++++++++++++++++++--
 drivers/input/mouse/alps.h    |   14 +
 drivers/input/mouse/psmouse.h |    1 +
 3 files changed, 768 insertions(+), 38 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index 44a0a71..a0248fd 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -23,6 +23,50 @@
 #include "psmouse.h"
 #include "alps.h"
 
+/*
+ * Definitions for ALPS version 3 and 4 command mode protocol
+ */
+#define ALPS_CMD_NIBBLE_10	0x01f2
+
+static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
+	{ PSMOUSE_CMD_SETPOLL,		0x00 }, /* 0 */
+	{ PSMOUSE_CMD_RESET_DIS,	0x00 }, /* 1 */
+	{ PSMOUSE_CMD_SETSCALE21,	0x00 }, /* 2 */
+	{ PSMOUSE_CMD_SETRATE,		0x0a }, /* 3 */
+	{ PSMOUSE_CMD_SETRATE,		0x14 }, /* 4 */
+	{ PSMOUSE_CMD_SETRATE,		0x28 }, /* 5 */
+	{ PSMOUSE_CMD_SETRATE,		0x3c }, /* 6 */
+	{ PSMOUSE_CMD_SETRATE,		0x50 }, /* 7 */
+	{ PSMOUSE_CMD_SETRATE,		0x64 }, /* 8 */
+	{ PSMOUSE_CMD_SETRATE,		0xc8 }, /* 9 */
+	{ ALPS_CMD_NIBBLE_10,		0x00 }, /* a */
+	{ PSMOUSE_CMD_SETRES,		0x00 }, /* b */
+	{ PSMOUSE_CMD_SETRES,		0x01 }, /* c */
+	{ PSMOUSE_CMD_SETRES,		0x02 }, /* d */
+	{ PSMOUSE_CMD_SETRES,		0x03 }, /* e */
+	{ PSMOUSE_CMD_SETSCALE11,	0x00 }, /* f */
+};
+
+static const struct alps_nibble_commands alps_v4_nibble_commands[] = {
+	{ PSMOUSE_CMD_ENABLE,		0x00 }, /* 0 */
+	{ PSMOUSE_CMD_RESET_DIS,	0x00 }, /* 1 */
+	{ PSMOUSE_CMD_SETSCALE21,	0x00 }, /* 2 */
+	{ PSMOUSE_CMD_SETRATE,		0x0a }, /* 3 */
+	{ PSMOUSE_CMD_SETRATE,		0x14 }, /* 4 */
+	{ PSMOUSE_CMD_SETRATE,		0x28 }, /* 5 */
+	{ PSMOUSE_CMD_SETRATE,		0x3c }, /* 6 */
+	{ PSMOUSE_CMD_SETRATE,		0x50 }, /* 7 */
+	{ PSMOUSE_CMD_SETRATE,		0x64 }, /* 8 */
+	{ PSMOUSE_CMD_SETRATE,		0xc8 }, /* 9 */
+	{ ALPS_CMD_NIBBLE_10,		0x00 }, /* a */
+	{ PSMOUSE_CMD_SETRES,		0x00 }, /* b */
+	{ PSMOUSE_CMD_SETRES,		0x01 }, /* c */
+	{ PSMOUSE_CMD_SETRES,		0x02 }, /* d */
+	{ PSMOUSE_CMD_SETRES,		0x03 }, /* e */
+	{ PSMOUSE_CMD_SETSCALE11,	0x00 }, /* f */
+};
+
+
 #define ALPS_DUALPOINT		0x02	/* touchpad has trackstick */
 #define ALPS_PASS		0x04	/* device has a pass-through port */
 
@@ -34,30 +78,33 @@
 					   6-byte ALPS packet */
 
 static const struct alps_model_info alps_model_data[] = {
-	{ { 0x32, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
-	{ { 0x33, 0x02, 0x0a },	ALPS_PROTO_V1, 0x88, 0xf8, 0 },				 /* UMAX-530T */
-	{ { 0x53, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x53, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x60, 0x03, 0xc8 }, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },				 /* HP ze1115 */
-	{ { 0x63, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x63, 0x02, 0x28 },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		 /* Fujitsu Siemens S6010 */
-	{ { 0x63, 0x02, 0x3c },	ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL },		 /* Toshiba Satellite S2400-103 */
-	{ { 0x63, 0x02, 0x50 },	ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 },		 /* NEC Versa L320 */
-	{ { 0x63, 0x02, 0x64 },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x63, 0x03, 0xc8 }, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D800 */
-	{ { 0x73, 0x00, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT },		 /* ThinkPad R61 8918-5QG */
-	{ { 0x73, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
-	{ { 0x73, 0x02, 0x14 },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		 /* Ahtec Laptop */
-	{ { 0x20, 0x02, 0x0e },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* XXX */
-	{ { 0x22, 0x02, 0x0a },	ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
-	{ { 0x22, 0x02, 0x14 }, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT }, /* Dell Latitude D600 */
+	{ { 0x32, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* Toshiba Salellite Pro M10 */
+	{ { 0x33, 0x02, 0x0a },	0x00, ALPS_PROTO_V1, 0x88, 0xf8, 0 },				/* UMAX-530T */
+	{ { 0x53, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x53, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x60, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },				/* HP ze1115 */
+	{ { 0x63, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x63, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x63, 0x02, 0x28 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		/* Fujitsu Siemens S6010 */
+	{ { 0x63, 0x02, 0x3c },	0x00, ALPS_PROTO_V2, 0x8f, 0x8f, ALPS_WHEEL },			/* Toshiba Satellite S2400-103 */
+	{ { 0x63, 0x02, 0x50 },	0x00, ALPS_PROTO_V2, 0xef, 0xef, ALPS_FW_BK_1 },		/* NEC Versa L320 */
+	{ { 0x63, 0x02, 0x64 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x63, 0x03, 0xc8 }, 0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* Dell Latitude D800 */
+	{ { 0x73, 0x00, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_DUALPOINT },		/* ThinkPad R61 8918-5QG */
+	{ { 0x73, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, 0 },
+	{ { 0x73, 0x02, 0x14 },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_FW_BK_2 },		/* Ahtec Laptop */
+	{ { 0x20, 0x02, 0x0e },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },	/* XXX */
+	{ { 0x22, 0x02, 0x0a },	0x00, ALPS_PROTO_V2, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT },
+	{ { 0x22, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff, ALPS_PASS | ALPS_DUALPOINT },	/* Dell Latitude D600 */
 	/* Dell Latitude E5500, E6400, E6500, Precision M4400 */
-	{ { 0x62, 0x02, 0x14 }, ALPS_PROTO_V2, 0xcf, 0xcf,
+	{ { 0x62, 0x02, 0x14 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf,
 		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },
-	{ { 0x73, 0x02, 0x50 }, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },		 /* Dell Vostro 1400 */
-	{ { 0x52, 0x01, 0x14 }, ALPS_PROTO_V2, 0xff, 0xff,
-		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },			 /* Toshiba Tecra A11-11L */
+	{ { 0x73, 0x02, 0x50 }, 0x00, ALPS_PROTO_V2, 0xcf, 0xcf, ALPS_FOUR_BUTTONS },		/* Dell Vostro 1400 */
+	{ { 0x52, 0x01, 0x14 }, 0x00, ALPS_PROTO_V2, 0xff, 0xff,
+		ALPS_PASS | ALPS_DUALPOINT | ALPS_PS2_INTERLEAVED },				/* Toshiba Tecra A11-11L */
+	{ { 0x73, 0x02, 0x64 },	0x9b, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
+	{ { 0x73, 0x02, 0x64 },	0x9d, ALPS_PROTO_V3, 0x8f, 0x8f, ALPS_DUALPOINT },
+	{ { 0x73, 0x02, 0x64 },	0x8a, ALPS_PROTO_V4, 0x8f, 0x8f, 0 },
 };
 
 /*
@@ -101,7 +148,7 @@ static void alps_report_buttons(struct psmouse *psmouse,
 	input_sync(dev2);
 }
 
-static void alps_process_packet(struct psmouse *psmouse)
+static void alps_process_packet_v1_v2(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
 	const struct alps_model_info *model = priv->i;
@@ -203,6 +250,224 @@ static void alps_process_packet(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
+static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev = priv->dev2;
+	int x, y, z, left, right, middle;
+
+	/* Sanity check packet */
+	if (!(packet[0] & 0x40)) {
+		psmouse_dbg(psmouse, "Bad trackstick packet, discarding\n");
+		return;
+	}
+
+	/*
+	 * There's a special packet that seems to indicate the end
+	 * of a stream of trackstick data. Filter these out.
+	 */
+	if (packet[1] == 0x7f && packet[2] == 0x7f && packet[4] == 0x7f)
+		return;
+
+	x = (s8)(((packet[0] & 0x20) << 2) | (packet[1] & 0x7f));
+	y = (s8)(((packet[0] & 0x10) << 3) | (packet[2] & 0x7f));
+	z = (packet[4] & 0x7c) >> 2;
+
+	/*
+	 * The x and y values tend to be quite large, and when used
+	 * alone the trackstick is difficult to use. Scale them down
+	 * to compensate.
+	 */
+	x /= 8;
+	y /= 8;
+
+	input_report_rel(dev, REL_X, x);
+	input_report_rel(dev, REL_Y, -y);
+
+	/*
+	 * Most ALPS models report the trackstick buttons in the touchpad
+	 * packets, but a few report them here. No reliable way has been
+	 * found to differentiate between the models upfront, so we enable
+	 * the quirk in response to seeing a button press in the trackstick
+	 * packet.
+	 */
+	left = packet[3] & 0x01;
+	right = packet[3] & 0x02;
+	middle = packet[3] & 0x04;
+
+	if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) &&
+	    (left || right || middle))
+		priv->quirks |= ALPS_QUIRK_TRACKSTICK_BUTTONS;
+
+	if (priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS) {
+		input_report_key(dev, BTN_LEFT, left);
+		input_report_key(dev, BTN_RIGHT, right);
+		input_report_key(dev, BTN_MIDDLE, middle);
+	}
+
+	input_sync(dev);
+	return;
+}
+
+static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev = psmouse->dev;
+	struct input_dev *dev2 = priv->dev2;
+	int x, y, z;
+	int left, right, middle;
+
+	/*
+	 * There's no single feature of touchpad position and bitmap
+	 * packets that can be used to distinguish between them. We
+	 * rely on the fact that a bitmap packet should always follow
+	 * a position packet with bit 6 of packet[4] set.
+	 */
+	if (priv->multi_packet) {
+		priv->multi_packet = 0;
+
+		/*
+		 * Sometimes a position packet will indicate a multi-packet
+		 * sequence, but then what follows is another position
+		 * packet. Check for this, and when it happens process the
+		 * position packet as usual.
+		 */
+		if (packet[0] & 0x40) {
+			/*
+			 * Bitmap packets are not yet supported, so for now
+			 * just ignore them.
+			 */
+			return;
+		}
+	}
+
+	if (!priv->multi_packet && (packet[4] & 0x40))
+		priv->multi_packet = 1;
+	else
+		priv->multi_packet = 0;
+
+	left = packet[3] & 0x01;
+	right = packet[3] & 0x02;
+	middle = packet[3] & 0x04;
+
+	x = ((packet[1] & 0x7f) << 4) | ((packet[4] & 0x30) >> 2) |
+	    ((packet[0] & 0x30) >> 4);
+	y = ((packet[2] & 0x7f) << 4) | (packet[4] & 0x0f);
+	z = packet[5] & 0x7f;
+
+	/*
+	 * Sometimes the hardware sends a single packet with z = 0
+	 * in the middle of a stream. Real releases generate packets
+	 * with x, y, and z all zero, so these seem to be flukes.
+	 * Ignore them.
+	 */
+	if (x && y && !z)
+		return;
+
+	if (z >= 64)
+		input_report_key(dev, BTN_TOUCH, 1);
+	else
+		input_report_key(dev, BTN_TOUCH, 0);
+
+	if (z > 0) {
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+	}
+	input_report_abs(dev, ABS_PRESSURE, z);
+
+	input_report_key(dev, BTN_TOOL_FINGER, z > 0);
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+	input_report_key(dev, BTN_MIDDLE, middle);
+
+	input_sync(dev);
+
+	if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
+		left = packet[3] & 0x10;
+		right = packet[3] & 0x20;
+		middle = packet[3] & 0x40;
+
+		input_report_key(dev2, BTN_LEFT, left);
+		input_report_key(dev2, BTN_RIGHT, right);
+		input_report_key(dev2, BTN_MIDDLE, middle);
+		input_sync(dev2);
+	}
+}
+
+static void alps_process_packet_v3(struct psmouse *psmouse)
+{
+	unsigned char *packet = psmouse->packet;
+
+	/*
+	 * v3 protocol packets come in three types, two representing
+	 * touchpad data and one representing trackstick data.
+	 * Trackstick packets seem to be distinguished by always
+	 * having 0x3f in the last byte. This value has never been
+	 * observed in the last byte of either of the other types
+	 * of packets.
+	 */
+	if (packet[5] == 0x3f) {
+		alps_process_trackstick_packet_v3(psmouse);
+		return;
+	}
+
+	alps_process_touchpad_packet_v3(psmouse);
+}
+
+static void alps_process_packet_v4(struct psmouse *psmouse)
+{
+	unsigned char *packet = psmouse->packet;
+	struct input_dev *dev = psmouse->dev;
+	int x, y, z;
+	int left, right;
+
+	left = packet[4] & 0x01;
+	right = packet[4] & 0x02;
+
+	x = ((packet[1] & 0x7f) << 4) | ((packet[3] & 0x30) >> 2) |
+	    ((packet[0] & 0x30) >> 4);
+	y = ((packet[2] & 0x7f) << 4) | (packet[3] & 0x0f);
+	z = packet[5] & 0x7f;
+
+	if (z >= 64)
+		input_report_key(dev, BTN_TOUCH, 1);
+	else
+		input_report_key(dev, BTN_TOUCH, 0);
+
+	if (z > 0) {
+		input_report_abs(dev, ABS_X, x);
+		input_report_abs(dev, ABS_Y, y);
+	}
+	input_report_abs(dev, ABS_PRESSURE, z);
+
+	input_report_key(dev, BTN_TOOL_FINGER, z > 0);
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+
+	input_sync(dev);
+}
+
+static void alps_process_packet(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	const struct alps_model_info *model = priv->i;
+
+	switch (model->proto_version) {
+	case ALPS_PROTO_V1:
+	case ALPS_PROTO_V2:
+		alps_process_packet_v1_v2(psmouse);
+		break;
+	case ALPS_PROTO_V3:
+		alps_process_packet_v3(psmouse);
+		break;
+	case ALPS_PROTO_V4:
+		alps_process_packet_v4(psmouse);
+		break;
+	}
+}
+
 static void alps_report_bare_ps2_packet(struct psmouse *psmouse,
 					unsigned char packet[],
 					bool report_buttons)
@@ -376,11 +641,127 @@ static psmouse_ret_t alps_process_byte(struct psmouse *psmouse)
 	return PSMOUSE_GOOD_DATA;
 }
 
+static int alps_command_mode_send_nibble(struct psmouse *psmouse, int nibble)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct alps_data *priv = psmouse->private;
+	int command;
+	unsigned char *param;
+	unsigned char dummy[4];
+
+	BUG_ON(nibble > 0xf);
+
+	command = priv->nibble_commands[nibble].command;
+	param = (command & 0x0f00) ?
+		dummy : (unsigned char *)&priv->nibble_commands[nibble].data;
+
+	if (ps2_command(ps2dev, param, command))
+		return -1;
+
+	return 0;
+}
+
+static int alps_command_mode_set_addr(struct psmouse *psmouse, int addr)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	struct alps_data *priv = psmouse->private;
+	int i, nibble;
+
+	if (ps2_command(ps2dev, NULL, priv->addr_command))
+		return -1;
+
+	for (i = 12; i >= 0; i -= 4) {
+		nibble = (addr >> i) & 0xf;
+		if (alps_command_mode_send_nibble(psmouse, nibble))
+			return -1;
+	}
+
+	return 0;
+}
+
+static int __alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[4];
+
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO))
+		return -1;
+
+	/*
+	 * The address being read is returned in the first two bytes
+	 * of the result. Check that this address matches the expected
+	 * address.
+	 */
+	if (addr != ((param[0] << 8) | param[1]))
+		return -1;
+
+	return param[2];
+}
+
+static int alps_command_mode_read_reg(struct psmouse *psmouse, int addr)
+{
+	if (alps_command_mode_set_addr(psmouse, addr))
+		return -1;
+	return __alps_command_mode_read_reg(psmouse, addr);
+}
+
+static int __alps_command_mode_write_reg(struct psmouse *psmouse, u8 value)
+{
+	if (alps_command_mode_send_nibble(psmouse, (value >> 4) & 0xf))
+		return -1;
+	if (alps_command_mode_send_nibble(psmouse, value & 0xf))
+		return -1;
+	return 0;
+}
+
+static int alps_command_mode_write_reg(struct psmouse *psmouse, int addr,
+				       u8 value)
+{
+	if (alps_command_mode_set_addr(psmouse, addr))
+		return -1;
+	return __alps_command_mode_write_reg(psmouse, value);
+}
+
+static int alps_enter_command_mode(struct psmouse *psmouse,
+				   unsigned char *resp)
+{
+	unsigned char param[4];
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_RESET_WRAP) ||
+	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+		psmouse_err(psmouse, "failed to enter command mode\n");
+		return -1;
+	}
+
+	if (param[0] != 0x88 && param[1] != 0x07) {
+		psmouse_dbg(psmouse,
+			    "unknown response while entering command mode: %2.2x %2.2x %2.2x\n",
+			    param[0], param[1], param[2]);
+		return -1;
+	}
+
+	if (resp)
+		*resp = param[2];
+	return 0;
+}
+
+static inline int alps_exit_command_mode(struct psmouse *psmouse)
+{
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSTREAM))
+		return -1;
+	return 0;
+}
+
 static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int *version)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	static const unsigned char rates[] = { 0, 10, 20, 40, 60, 80, 100, 200 };
 	unsigned char param[4];
+	const struct alps_model_info *model = NULL;
 	int i;
 
 	/*
@@ -428,12 +809,41 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
 		*version = (param[0] << 8) | (param[1] << 4) | i;
 	}
 
-	for (i = 0; i < ARRAY_SIZE(alps_model_data); i++)
+	for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
 		if (!memcmp(param, alps_model_data[i].signature,
-			    sizeof(alps_model_data[i].signature)))
-			return alps_model_data + i;
+			    sizeof(alps_model_data[i].signature))) {
+			model = alps_model_data + i;
+			break;
+		}
+	}
 
-	return NULL;
+	if (model && model->proto_version > ALPS_PROTO_V2) {
+		/*
+		 * Need to check command mode response to identify
+		 * model
+		 */
+		model = NULL;
+		if (alps_enter_command_mode(psmouse, param)) {
+			psmouse_warn(psmouse,
+				     "touchpad failed to enter command mode\n");
+		} else {
+			for (i = 0; i < ARRAY_SIZE(alps_model_data); i++) {
+				if (alps_model_data[i].proto_version > ALPS_PROTO_V2 &&
+				    alps_model_data[i].command_mode_resp == param[0]) {
+					model = alps_model_data + i;
+					break;
+				}
+			}
+			alps_exit_command_mode(psmouse);
+
+			if (!model)
+				psmouse_dbg(psmouse,
+					    "Unknown command mode response %2.2x\n",
+					    param[0]);
+		}
+	}
+
+	return model;
 }
 
 /*
@@ -441,7 +851,7 @@ static const struct alps_model_info *alps_get_model(struct psmouse *psmouse, int
  * subsequent commands. It looks like glidepad is behind stickpointer,
  * I'd thought it would be other way around...
  */
-static int alps_passthrough_mode(struct psmouse *psmouse, bool enable)
+static int alps_passthrough_mode_v2(struct psmouse *psmouse, bool enable)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 	int cmd = enable ? PSMOUSE_CMD_SETSCALE21 : PSMOUSE_CMD_SETSCALE11;
@@ -458,7 +868,7 @@ static int alps_passthrough_mode(struct psmouse *psmouse, bool enable)
 	return 0;
 }
 
-static int alps_absolute_mode(struct psmouse *psmouse)
+static int alps_absolute_mode_v1_v2(struct psmouse *psmouse)
 {
 	struct ps2dev *ps2dev = &psmouse->ps2dev;
 
@@ -533,13 +943,13 @@ static int alps_poll(struct psmouse *psmouse)
 	bool poll_failed;
 
 	if (priv->i->flags & ALPS_PASS)
-		alps_passthrough_mode(psmouse, true);
+		alps_passthrough_mode_v2(psmouse, true);
 
 	poll_failed = ps2_command(&psmouse->ps2dev, buf,
 				  PSMOUSE_CMD_POLL | (psmouse->pktsize << 8)) < 0;
 
 	if (priv->i->flags & ALPS_PASS)
-		alps_passthrough_mode(psmouse, false);
+		alps_passthrough_mode_v2(psmouse, false);
 
 	if (poll_failed || (buf[0] & priv->i->mask0) != priv->i->byte0)
 		return -1;
@@ -556,13 +966,13 @@ static int alps_poll(struct psmouse *psmouse)
 	return 0;
 }
 
-static int alps_hw_init(struct psmouse *psmouse)
+static int alps_hw_init_v1_v2(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
 	const struct alps_model_info *model = priv->i;
 
 	if ((model->flags & ALPS_PASS) &&
-	    alps_passthrough_mode(psmouse, true)) {
+	    alps_passthrough_mode_v2(psmouse, true)) {
 		return -1;
 	}
 
@@ -571,13 +981,13 @@ static int alps_hw_init(struct psmouse *psmouse)
 		return -1;
 	}
 
-	if (alps_absolute_mode(psmouse)) {
+	if (alps_absolute_mode_v1_v2(psmouse)) {
 		psmouse_err(psmouse, "Failed to enable absolute mode\n");
 		return -1;
 	}
 
 	if ((model->flags & ALPS_PASS) &&
-	    alps_passthrough_mode(psmouse, false)) {
+	    alps_passthrough_mode_v2(psmouse, false)) {
 		return -1;
 	}
 
@@ -590,6 +1000,297 @@ static int alps_hw_init(struct psmouse *psmouse)
 	return 0;
 }
 
+/*
+ * Enable or disable passthrough mode to the trackstick. Must be in
+ * command mode when calling this function.
+ */
+static int alps_passthrough_mode_v3(struct psmouse *psmouse, bool enable)
+{
+	int reg_val;
+
+	reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
+	if (reg_val == -1)
+		return -1;
+
+	if (enable)
+		reg_val |= 0x01;
+	else
+		reg_val &= ~0x01;
+
+	if (__alps_command_mode_write_reg(psmouse, reg_val))
+		return -1;
+
+	return 0;
+}
+
+/* Must be in command mode when calling this function */
+static int alps_absolute_mode_v3(struct psmouse *psmouse)
+{
+	int reg_val;
+
+	reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
+	if (reg_val == -1)
+		return -1;
+
+	reg_val |= 0x06;
+	if (__alps_command_mode_write_reg(psmouse, reg_val))
+		return -1;
+
+	return 0;
+}
+
+static int alps_hw_init_v3(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	int reg_val;
+	unsigned char param[4];
+
+	priv->nibble_commands = alps_v3_nibble_commands;
+	priv->addr_command = PSMOUSE_CMD_RESET_WRAP;
+
+	if (alps_enter_command_mode(psmouse, NULL))
+		goto error;
+
+	/* Check for trackstick */
+	reg_val = alps_command_mode_read_reg(psmouse, 0x0008);
+	if (reg_val == -1)
+		goto error;
+	if (reg_val & 0x80) {
+		if (alps_passthrough_mode_v3(psmouse, true))
+			goto error;
+		if (alps_exit_command_mode(psmouse))
+			goto error;
+
+		/*
+		 * E7 report for the trackstick
+		 *
+		 * There have been reports of failures to seem to trace back
+		 * to the above trackstick check failing. When these occur
+		 * this E7 report fails, so when that happens we continue
+		 * with the assumption that there isn't a trackstick after
+		 * all.
+		 */
+		param[0] = 0x64;
+		if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+		    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE21) ||
+		    ps2_command(ps2dev, param, PSMOUSE_CMD_GETINFO)) {
+			psmouse_warn(psmouse, "trackstick E7 report failed\n");
+		} else {
+			psmouse_dbg(psmouse,
+				    "trackstick E7 report: %2.2x %2.2x %2.2x\n",
+				    param[0], param[1], param[2]);
+
+			/*
+			 * Not sure what this does, but it is absolutely
+			 * essential. Without it, the touchpad does not
+			 * work at all and the trackstick just emits normal
+			 * PS/2 packets.
+			 */
+			if (ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+			    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+			    ps2_command(ps2dev, NULL, PSMOUSE_CMD_SETSCALE11) ||
+			    alps_command_mode_send_nibble(psmouse, 0x9) ||
+			    alps_command_mode_send_nibble(psmouse, 0x4)) {
+				psmouse_err(psmouse,
+					    "Error sending magic E6 sequence\n");
+				goto error_passthrough;
+			}
+		}
+
+		if (alps_enter_command_mode(psmouse, NULL))
+			goto error_passthrough;
+		if (alps_passthrough_mode_v3(psmouse, false))
+			goto error;
+	}
+
+	if (alps_absolute_mode_v3(psmouse)) {
+		psmouse_err(psmouse, "Failed to enter absolute mode\n");
+		goto error;
+	}
+
+	reg_val = alps_command_mode_read_reg(psmouse, 0x0006);
+	if (reg_val == -1)
+		goto error;
+	if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
+		goto error;
+
+	reg_val = alps_command_mode_read_reg(psmouse, 0x0007);
+	if (reg_val == -1)
+		goto error;
+	if (__alps_command_mode_write_reg(psmouse, reg_val | 0x01))
+		goto error;
+
+	if (alps_command_mode_read_reg(psmouse, 0x0144) == -1)
+		goto error;
+	if (__alps_command_mode_write_reg(psmouse, 0x04))
+		goto error;
+
+	if (alps_command_mode_read_reg(psmouse, 0x0159) == -1)
+		goto error;
+	if (__alps_command_mode_write_reg(psmouse, 0x03))
+		goto error;
+
+	if (alps_command_mode_read_reg(psmouse, 0x0163) == -1)
+		goto error;
+	if (alps_command_mode_write_reg(psmouse, 0x0163, 0x03))
+		goto error;
+
+	if (alps_command_mode_read_reg(psmouse, 0x0162) == -1)
+		goto error;
+	if (alps_command_mode_write_reg(psmouse, 0x0162, 0x04))
+		goto error;
+
+	/*
+	 * This ensures the trackstick packets are in the format
+	 * supported by this driver. If bit 1 isn't set the packet
+	 * format is different.
+	 */
+	if (alps_command_mode_write_reg(psmouse, 0x0008, 0x82))
+		goto error;
+
+	alps_exit_command_mode(psmouse);
+
+	/* Set rate and enable data reporting */
+	param[0] = 0x64;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
+		psmouse_err(psmouse, "Failed to enable data reporting\n");
+		return -1;
+	}
+
+	return 0;
+
+error_passthrough:
+	/* Something failed while in passthrough mode, so try to get out */
+	if (!alps_enter_command_mode(psmouse, NULL))
+		alps_passthrough_mode_v3(psmouse, false);
+error:
+	/*
+	 * Leaving the touchpad in command mode will essentially render
+	 * it unusable until the machine reboots, so exit it here just
+	 * to be safe
+	 */
+	alps_exit_command_mode(psmouse);
+	return -1;
+}
+
+/* Must be in command mode when calling this function */
+static int alps_absolute_mode_v4(struct psmouse *psmouse)
+{
+	int reg_val;
+
+	reg_val = alps_command_mode_read_reg(psmouse, 0x0004);
+	if (reg_val == -1)
+		return -1;
+
+	reg_val |= 0x02;
+	if (__alps_command_mode_write_reg(psmouse, reg_val))
+		return -1;
+
+	return 0;
+}
+
+static int alps_hw_init_v4(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	struct ps2dev *ps2dev = &psmouse->ps2dev;
+	unsigned char param[4];
+
+	priv->nibble_commands = alps_v4_nibble_commands;
+	priv->addr_command = PSMOUSE_CMD_DISABLE;
+
+	if (alps_enter_command_mode(psmouse, NULL))
+		goto error;
+
+	if (alps_absolute_mode_v4(psmouse)) {
+		psmouse_err(psmouse, "Failed to enter absolute mode\n");
+		goto error;
+	}
+
+	if (alps_command_mode_write_reg(psmouse, 0x0007, 0x8c))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x0149, 0x03))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x0160, 0x03))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x017f, 0x15))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x0151, 0x01))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x0168, 0x03))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x014a, 0x03))
+		goto error;
+
+	if (alps_command_mode_write_reg(psmouse, 0x0161, 0x03))
+		goto error;
+
+	alps_exit_command_mode(psmouse);
+
+	/*
+	 * This sequence changes the output from a 9-byte to an
+	 * 8-byte format. All the same data seems to be present,
+	 * just in a more compact format.
+	 */
+	param[0] = 0xc8;
+	param[1] = 0x64;
+	param[2] = 0x50;
+	if (ps2_command(ps2dev, &param[0], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, &param[1], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, &param[2], PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, param, PSMOUSE_CMD_GETID))
+		return -1;
+
+	/* Set rate and enable data reporting */
+	param[0] = 0x64;
+	if (ps2_command(ps2dev, param, PSMOUSE_CMD_SETRATE) ||
+	    ps2_command(ps2dev, NULL, PSMOUSE_CMD_ENABLE)) {
+		psmouse_err(psmouse, "Failed to enable data reporting\n");
+		return -1;
+	}
+
+	return 0;
+
+error:
+	/*
+	 * Leaving the touchpad in command mode will essentially render
+	 * it unusable until the machine reboots, so exit it here just
+	 * to be safe
+	 */
+	alps_exit_command_mode(psmouse);
+	return -1;
+}
+
+static int alps_hw_init(struct psmouse *psmouse)
+{
+	struct alps_data *priv = psmouse->private;
+	const struct alps_model_info *model = priv->i;
+	int ret = -1;
+
+	switch (model->proto_version) {
+	case ALPS_PROTO_V1:
+	case ALPS_PROTO_V2:
+		ret = alps_hw_init_v1_v2(psmouse);
+		break;
+	case ALPS_PROTO_V3:
+		ret = alps_hw_init_v3(psmouse);
+		break;
+	case ALPS_PROTO_V4:
+		ret = alps_hw_init_v4(psmouse);
+		break;
+	}
+
+	return ret;
+}
+
 static int alps_reconnect(struct psmouse *psmouse)
 {
 	const struct alps_model_info *model;
@@ -630,6 +1331,8 @@ int alps_init(struct psmouse *psmouse)
 
 	psmouse->private = priv;
 
+	psmouse_reset(psmouse);
+
 	model = alps_get_model(psmouse, &version);
 	if (!model)
 		goto init_fail;
@@ -657,8 +1360,20 @@ int alps_init(struct psmouse *psmouse)
 		BIT_MASK(BTN_LEFT) | BIT_MASK(BTN_RIGHT);
 
 	dev1->evbit[BIT_WORD(EV_ABS)] |= BIT_MASK(EV_ABS);
-	input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
-	input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+
+	switch (model->proto_version) {
+	case ALPS_PROTO_V1:
+	case ALPS_PROTO_V2:
+		input_set_abs_params(dev1, ABS_X, 0, 1023, 0, 0);
+		input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
+		break;
+	case ALPS_PROTO_V3:
+	case ALPS_PROTO_V4:
+		input_set_abs_params(dev1, ABS_X, 0, 2000, 0, 0);
+		input_set_abs_params(dev1, ABS_Y, 0, 1400, 0, 0);
+		break;
+	}
+
 	input_set_abs_params(dev1, ABS_PRESSURE, 0, 127, 0, 0);
 
 	if (model->flags & ALPS_WHEEL) {
@@ -701,7 +1416,7 @@ int alps_init(struct psmouse *psmouse)
 	psmouse->poll = alps_poll;
 	psmouse->disconnect = alps_disconnect;
 	psmouse->reconnect = alps_reconnect;
-	psmouse->pktsize = 6;
+	psmouse->pktsize = model->proto_version == ALPS_PROTO_V4 ? 8 : 6;
 
 	/* We are having trouble resyncing ALPS touchpads so disable it for now */
 	psmouse->resync_time = 0;
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 4ce9bba..62db7f4 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -14,22 +14,36 @@
 
 #define ALPS_PROTO_V1	0
 #define ALPS_PROTO_V2	1
+#define ALPS_PROTO_V3	2
+#define ALPS_PROTO_V4	3
 
 struct alps_model_info {
         unsigned char signature[3];
+	unsigned char command_mode_resp; /* v3/v4 only */
 	unsigned char proto_version;
         unsigned char byte0, mask0;
         unsigned char flags;
 };
 
+struct alps_nibble_commands {
+	int command;
+	unsigned char data;
+};
+
 struct alps_data {
 	struct input_dev *dev2;		/* Relative device */
 	char phys[32];			/* Phys */
 	const struct alps_model_info *i;/* Info */
+	const struct alps_nibble_commands *nibble_commands;
+	int addr_command;		/* Command to set register address */
 	int prev_fin;			/* Finger bit from previous packet */
+	int multi_packet;		/* Multi-packet data in progress */
+	u8 quirks;
 	struct timer_list timer;
 };
 
+#define ALPS_QUIRK_TRACKSTICK_BUTTONS	1 /* trakcstick buttons in trackstick packet */
+
 #ifdef CONFIG_MOUSE_PS2_ALPS
 int alps_detect(struct psmouse *psmouse, bool set_properties);
 int alps_init(struct psmouse *psmouse);
diff --git a/drivers/input/mouse/psmouse.h b/drivers/input/mouse/psmouse.h
index 9b84b0c..11a9c6c 100644
--- a/drivers/input/mouse/psmouse.h
+++ b/drivers/input/mouse/psmouse.h
@@ -8,6 +8,7 @@
 #define PSMOUSE_CMD_SETSTREAM	0x00ea
 #define PSMOUSE_CMD_SETPOLL	0x00f0
 #define PSMOUSE_CMD_POLL	0x00eb	/* caller sets number of bytes to receive */
+#define PSMOUSE_CMD_RESET_WRAP	0x00ec
 #define PSMOUSE_CMD_GETID	0x02f2
 #define PSMOUSE_CMD_SETRATE	0x10f3
 #define PSMOUSE_CMD_ENABLE	0x00f4
-- 
1.7.7.3


From 01ce661fc83005947dc958a5739c153843af8a73 Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Mon, 7 Nov 2011 19:54:13 -0800
Subject: [PATCH 5/6] Input: ALPS - add semi-MT support for v3 protocol

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 drivers/input/mouse/alps.c |  233 ++++++++++++++++++++++++++++++++++++++++----
 drivers/input/mouse/alps.h |    1 +
 2 files changed, 215 insertions(+), 19 deletions(-)

diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index a0248fd..bd87380 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -17,6 +17,7 @@
 
 #include <linux/slab.h>
 #include <linux/input.h>
+#include <linux/input/mt.h>
 #include <linux/serio.h>
 #include <linux/libps2.h>
 
@@ -26,6 +27,12 @@
 /*
  * Definitions for ALPS version 3 and 4 command mode protocol
  */
+#define ALPS_V3_X_MAX	2000
+#define ALPS_V3_Y_MAX	1400
+
+#define ALPS_BITMAP_X_BITS	15
+#define ALPS_BITMAP_Y_BITS	11
+
 #define ALPS_CMD_NIBBLE_10	0x01f2
 
 static const struct alps_nibble_commands alps_v3_nibble_commands[] = {
@@ -250,6 +257,137 @@ static void alps_process_packet_v1_v2(struct psmouse *psmouse)
 	input_sync(dev);
 }
 
+/*
+ * Process bitmap data from v3 and v4 protocols. Returns the number of
+ * fingers detected. A return value of 0 means at least one of the
+ * bitmaps was empty.
+ *
+ * The bitmaps don't have enough data to track fingers, so this function
+ * only generates points representing a bounding box of all contacts.
+ * These points are returned in x1, y1, x2, and y2 when the return value
+ * is greater than 0.
+ */
+static int alps_process_bitmap(unsigned int x_map, unsigned int y_map,
+			       int *x1, int *y1, int *x2, int *y2)
+{
+	struct alps_bitmap_point {
+		int start_bit;
+		int num_bits;
+	};
+
+	int fingers_x = 0, fingers_y = 0, fingers;
+	int i, bit, prev_bit;
+	struct alps_bitmap_point x_low = {0,}, x_high = {0,};
+	struct alps_bitmap_point y_low = {0,}, y_high = {0,};
+	struct alps_bitmap_point *point;
+
+	if (!x_map || !y_map)
+		return 0;
+
+	*x1 = *y1 = *x2 = *y2 = 0;
+
+	prev_bit = 0;
+	point = &x_low;
+	for (i = 0; x_map != 0; i++, x_map >>= 1) {
+		bit = x_map & 1;
+		if (bit) {
+			if (!prev_bit) {
+				point->start_bit = i;
+				fingers_x++;
+			}
+			point->num_bits++;
+		} else {
+			if (prev_bit)
+				point = &x_high;
+			else
+				point->num_bits = 0;
+		}
+		prev_bit = bit;
+	}
+
+	/*
+	 * y bitmap is reversed for what we need (lower positions are in
+	 * higher bits), so we process from the top end.
+	 */
+	y_map = y_map << (sizeof(y_map) * BITS_PER_BYTE - ALPS_BITMAP_Y_BITS);
+	prev_bit = 0;
+	point = &y_low;
+	for (i = 0; y_map != 0; i++, y_map <<= 1) {
+		bit = y_map & (1 << (sizeof(y_map) * BITS_PER_BYTE - 1));
+		if (bit) {
+			if (!prev_bit) {
+				point->start_bit = i;
+				fingers_y++;
+			}
+			point->num_bits++;
+		} else {
+			if (prev_bit)
+				point = &y_high;
+			else
+				point->num_bits = 0;
+		}
+		prev_bit = bit;
+	}
+
+	/*
+	 * Fingers can overlap, so we use the maximum count of fingers
+	 * on either axis as the finger count.
+	 */
+	fingers = max(fingers_x, fingers_y);
+
+	/*
+	 * If total fingers is > 1 but either axis reports only a single
+	 * contact, we have overlapping or adjacent fingers. For the
+	 * purposes of creating a bounding box, divide the single contact
+	 * (roughly) equally between the two points.
+	 */
+	if (fingers > 1) {
+		if (fingers_x == 1) {
+			i = x_low.num_bits / 2;
+			x_low.num_bits = x_low.num_bits - i;
+			x_high.start_bit = x_low.start_bit + i;
+			x_high.num_bits = max(i, 1);
+		} else if (fingers_y == 1) {
+			i = y_low.num_bits / 2;
+			y_low.num_bits = y_low.num_bits - i;
+			y_high.start_bit = y_low.start_bit + i;
+			y_high.num_bits = max(i, 1);
+		}
+	}
+
+	*x1 = (ALPS_V3_X_MAX * (2 * x_low.start_bit + x_low.num_bits - 1)) /
+	      (2 * (ALPS_BITMAP_X_BITS - 1));
+	*y1 = (ALPS_V3_Y_MAX * (2 * y_low.start_bit + y_low.num_bits - 1)) /
+	      (2 * (ALPS_BITMAP_Y_BITS - 1));
+
+	if (fingers > 1) {
+		*x2 = (ALPS_V3_X_MAX * (2 * x_high.start_bit + x_high.num_bits - 1)) /
+		      (2 * (ALPS_BITMAP_X_BITS - 1));
+		*y2 = (ALPS_V3_Y_MAX * (2 * y_high.start_bit + y_high.num_bits - 1)) /
+		      (2 * (ALPS_BITMAP_Y_BITS - 1));
+	}
+
+	return fingers;
+}
+
+static void alps_set_slot(struct input_dev *dev, int slot, bool active,
+			  int x, int y)
+{
+	input_mt_slot(dev, slot);
+	input_mt_report_slot_state(dev, MT_TOOL_FINGER, active);
+	if (active) {
+		input_report_abs(dev, ABS_MT_POSITION_X, x);
+		input_report_abs(dev, ABS_MT_POSITION_Y, y);
+	}
+}
+
+static void alps_report_semi_mt_data(struct input_dev *dev, int num_fingers,
+				     int x1, int y1, int x2, int y2)
+{
+	alps_set_slot(dev, 0, num_fingers != 0, x1, y1);
+	alps_set_slot(dev, 1, num_fingers == 2, x2, y2);
+}
+
 static void alps_process_trackstick_packet_v3(struct psmouse *psmouse)
 {
 	struct alps_data *priv = psmouse->private;
@@ -318,16 +456,17 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 	struct input_dev *dev2 = priv->dev2;
 	int x, y, z;
 	int left, right, middle;
+	int x1 = 0, y1 = 0, x2 = 0, y2 = 0;
+	int fingers = 0, bmap_fingers;
+	unsigned int x_bitmap, y_bitmap;
 
 	/*
-	 * There's no single feature of touchpad position and bitmap
-	 * packets that can be used to distinguish between them. We
-	 * rely on the fact that a bitmap packet should always follow
-	 * a position packet with bit 6 of packet[4] set.
+	 * There's no single feature of touchpad position and bitmap packets
+	 * that can be used to distinguish between them. We rely on the fact
+	 * that a bitmap packet should always follow a position packet with
+	 * bit 6 of packet[4] set.
 	 */
 	if (priv->multi_packet) {
-		priv->multi_packet = 0;
-
 		/*
 		 * Sometimes a position packet will indicate a multi-packet
 		 * sequence, but then what follows is another position
@@ -335,18 +474,49 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 		 * position packet as usual.
 		 */
 		if (packet[0] & 0x40) {
+			fingers = (packet[5] & 0x3) + 1;
+			x_bitmap = ((packet[4] & 0x7e) << 8) |
+				   ((packet[1] & 0x7f) << 2) |
+				   ((packet[0] & 0x30) >> 4);
+			y_bitmap = ((packet[3] & 0x70) << 4) |
+				   ((packet[2] & 0x7f) << 1) |
+				   (packet[4] & 0x01);
+
+			bmap_fingers = alps_process_bitmap(x_bitmap, y_bitmap,
+							   &x1, &y1, &x2, &y2);
+
 			/*
-			 * Bitmap packets are not yet supported, so for now
-			 * just ignore them.
+			 * We shouldn't report more than one finger if
+			 * we don't have two coordinates.
 			 */
-			return;
+			if (fingers > 1 && bmap_fingers < 2)
+				fingers = bmap_fingers;
+
+			/* Now process position packet */
+			packet = priv->multi_data;
+		} else {
+			priv->multi_packet = 0;
 		}
 	}
 
-	if (!priv->multi_packet && (packet[4] & 0x40))
+	/*
+	 * Bit 6 of byte 0 is not usually set in position packets. The only
+	 * times it seems to be set is in situations where the data is
+	 * suspect anyway, e.g. a palm resting flat on the touchpad. Given
+	 * this combined with the fact that this bit is useful for filtering
+	 * out misidentified bitmap packets, we reject anything with this
+	 * bit set.
+	 */
+	if (packet[0] & 0x40)
+		return;
+
+	if (!priv->multi_packet && (packet[4] & 0x40)) {
 		priv->multi_packet = 1;
-	else
-		priv->multi_packet = 0;
+		memcpy(priv->multi_data, packet, sizeof(priv->multi_data));
+		return;
+	}
+
+	priv->multi_packet = 0;
 
 	left = packet[3] & 0x01;
 	right = packet[3] & 0x02;
@@ -366,22 +536,38 @@ static void alps_process_touchpad_packet_v3(struct psmouse *psmouse)
 	if (x && y && !z)
 		return;
 
+	/*
+	 * If we don't have MT data or the bitmaps were empty, we have
+	 * to rely on ST data.
+	 */
+	if (!fingers) {
+		x1 = x;
+		y1 = y;
+		fingers = z > 0 ? 1 : 0;
+	}
+
 	if (z >= 64)
 		input_report_key(dev, BTN_TOUCH, 1);
 	else
 		input_report_key(dev, BTN_TOUCH, 0);
 
+	alps_report_semi_mt_data(dev, fingers, x1, y1, x2, y2);
+
+	input_report_key(dev, BTN_TOOL_FINGER, fingers == 1);
+	input_report_key(dev, BTN_TOOL_DOUBLETAP, fingers == 2);
+	input_report_key(dev, BTN_TOOL_TRIPLETAP, fingers == 3);
+	input_report_key(dev, BTN_TOOL_QUADTAP, fingers == 4);
+
+	input_report_key(dev, BTN_LEFT, left);
+	input_report_key(dev, BTN_RIGHT, right);
+	input_report_key(dev, BTN_MIDDLE, middle);
+
 	if (z > 0) {
 		input_report_abs(dev, ABS_X, x);
 		input_report_abs(dev, ABS_Y, y);
 	}
 	input_report_abs(dev, ABS_PRESSURE, z);
 
-	input_report_key(dev, BTN_TOOL_FINGER, z > 0);
-	input_report_key(dev, BTN_LEFT, left);
-	input_report_key(dev, BTN_RIGHT, right);
-	input_report_key(dev, BTN_MIDDLE, middle);
-
 	input_sync(dev);
 
 	if (!(priv->quirks & ALPS_QUIRK_TRACKSTICK_BUTTONS)) {
@@ -1368,9 +1554,18 @@ int alps_init(struct psmouse *psmouse)
 		input_set_abs_params(dev1, ABS_Y, 0, 767, 0, 0);
 		break;
 	case ALPS_PROTO_V3:
+		set_bit(INPUT_PROP_SEMI_MT, dev1->propbit);
+		input_mt_init_slots(dev1, 2);
+		input_set_abs_params(dev1, ABS_MT_POSITION_X, 0, ALPS_V3_X_MAX, 0, 0);
+		input_set_abs_params(dev1, ABS_MT_POSITION_Y, 0, ALPS_V3_Y_MAX, 0, 0);
+
+		set_bit(BTN_TOOL_DOUBLETAP, dev1->keybit);
+		set_bit(BTN_TOOL_TRIPLETAP, dev1->keybit);
+		set_bit(BTN_TOOL_QUADTAP, dev1->keybit);
+		/* fall through */
 	case ALPS_PROTO_V4:
-		input_set_abs_params(dev1, ABS_X, 0, 2000, 0, 0);
-		input_set_abs_params(dev1, ABS_Y, 0, 1400, 0, 0);
+		input_set_abs_params(dev1, ABS_X, 0, ALPS_V3_X_MAX, 0, 0);
+		input_set_abs_params(dev1, ABS_Y, 0, ALPS_V3_Y_MAX, 0, 0);
 		break;
 	}
 
diff --git a/drivers/input/mouse/alps.h b/drivers/input/mouse/alps.h
index 62db7f4..a00a4ab 100644
--- a/drivers/input/mouse/alps.h
+++ b/drivers/input/mouse/alps.h
@@ -38,6 +38,7 @@ struct alps_data {
 	int addr_command;		/* Command to set register address */
 	int prev_fin;			/* Finger bit from previous packet */
 	int multi_packet;		/* Multi-packet data in progress */
+	unsigned char multi_data[6];	/* Saved multi-packet data */
 	u8 quirks;
 	struct timer_list timer;
 };
-- 
1.7.7.3


From 7cf801cfc0774b777aa6861cf4a43a90b112b1ed Mon Sep 17 00:00:00 2001
From: Seth Forshee <seth.forshee@canonical.com>
Date: Mon, 7 Nov 2011 19:54:35 -0800
Subject: [PATCH 6/6] Input: ALPS - add documentation for protocol versions 3
 and 4

Also converts from using "old" and "new" to describe the already-known
protocols to using "version 1" and "version 2" to match the code.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Acked-by: Chase Douglas <chase.douglas@canonical.com>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
---
 Documentation/input/alps.txt |  135 ++++++++++++++++++++++++++++++++++++++----
 1 files changed, 124 insertions(+), 11 deletions(-)

diff --git a/Documentation/input/alps.txt b/Documentation/input/alps.txt
index ab5478f..f274c28 100644
--- a/Documentation/input/alps.txt
+++ b/Documentation/input/alps.txt
@@ -4,12 +4,9 @@ ALPS Touchpad Protocol
 Introduction
 ------------
 
-Currently the ALPS touchpad driver supports two protocol versions in use by
-ALPS touchpads, the "old" and "new" protocol versions. Fundamentally these
-differ only in the format of their event packets (in reality many features may
-be found on new protocol devices that aren't found on the old protocol
-devices, but these are handled transparently as feature differences rather
-than protocol differences).
+Currently the ALPS touchpad driver supports four protocol versions in use by
+ALPS touchpads, called versions 1, 2, 3, and 4. Information about the various
+protocol versions is contained in the following sections.
 
 Detection
 ---------
@@ -22,10 +19,37 @@ If the E6 report is successful, the touchpad model is identified using the "E7
 report" sequence: E8-E7-E7-E7-E9. The response is the model signature and is
 matched against known models in the alps_model_data_array.
 
+With protocol versions 3 and 4, the E7 report model signature is always
+73-02-64. To differentiate between these versions, the response from the
+"Enter Command Mode" sequence must be inspected as described below.
+
+Command Mode
+------------
+
+Protocol versions 3 and 4 have a command mode that is used to read and write
+one-byte device registers in a 16-bit address space. The command sequence
+EC-EC-EC-E9 places the device in command mode, and the device will respond
+with 88-07 followed by a third byte. This third byte can be used to determine
+whether the devices uses the version 3 or 4 protocol.
+
+To exit command mode, PSMOUSE_CMD_SETSTREAM (EA) is sent to the touchpad.
+
+While in command mode, register addresses can be set by first sending a
+specific command, either EC for v3 devices or F5 for v4 devices. Then the
+address is sent one nibble at a time, where each nibble is encoded as a
+command with optional data. This enoding differs slightly between the v3 and
+v4 protocols.
+
+Once an address has been set, the addressed register can be read by sending
+PSMOUSE_CMD_GETINFO (E9). The first two bytes of the response contains the
+address of the register being read, and the third contains the value of the
+register. Registers are written by writing the value one nibble at a time
+using the same encoding used for addresses.
+
 Packet Format
 -------------
 
-In the following tables, the following notation us used.
+In the following tables, the following notation is used.
 
  CAPITALS = stick, miniscules = touchpad
 
@@ -41,8 +65,8 @@ PS/2 packet format
 
 Note that the device never signals overflow condition.
 
-ALPS Absolute Mode - Old Format
--------------------------------
+ALPS Absolute Mode - Protocol Verion 1
+--------------------------------------
 
  byte 0:  1    0    0    0    1   x9   x8   x7
  byte 1:  0   x6   x5   x4   x3   x2   x1   x0
@@ -51,8 +75,8 @@ ALPS Absolute Mode - Old Format
  byte 4:  0   y6   y5   y4   y3   y2   y1   y0
  byte 5:  0   z6   z5   z4   z3   z2   z1   z0
 
-ALPS Absolute Mode - New Format
--------------------------------
+ALPS Absolute Mode - Protocol Version 2
+---------------------------------------
 
  byte 0:  1    ?    ?    ?    1    ?    ?    ?
  byte 1:  0   x6   x5   x4   x3   x2   x1   x0
@@ -73,3 +97,92 @@ Dualpoint device -- interleaved packet format
  byte 6:    0   y9   y8   y7    1    m    r    l
  byte 7:    0   y6   y5   y4   y3   y2   y1   y0
  byte 8:    0   z6   z5   z4   z3   z2   z1   z0
+
+ALPS Absolute Mode - Protocol Version 3
+---------------------------------------
+
+ALPS protocol version 3 has three different packet formats. The first two are
+associated with touchpad events, and the third is associatd with trackstick
+events.
+
+The first type is the touchpad position packet.
+
+ byte 0:    1    ?   x1   x0    1    1    1    1
+ byte 1:    0  x10   x9   x8   x7   x6   x5   x4
+ byte 2:    0  y10   y9   y8   y7   y6   y5   y4
+ byte 3:    0    M    R    L    1    m    r    l
+ byte 4:    0   mt   x3   x2   y3   y2   y1   y0
+ byte 5:    0   z6   z5   z4   z3   z2   z1   z0
+
+Note that for some devices the trackstick buttons are reported in this packet,
+and on others it is reported in the trackstick packets.
+
+The second packet type contains bitmaps representing the x and y axes. In the
+bitmaps a given bit is set if there is a finger covering that position on the
+given axis. Thus the bitmap packet can be used for low-resolution multi-touch
+data, although finger tracking is not possible.  This packet also encodes the
+number of contacts (f1 and f0 in the table below).
+
+ byte 0:    1    1   x1   x0    1    1    1    1
+ byte 1:    0   x8   x7   x6   x5   x4   x3   x2
+ byte 2:    0   y7   y6   y5   y4   y3   y2   y1
+ byte 3:    0  y10   y9   y8    1    1    1    1
+ byte 4:    0  x14  x13  x12  x11  x10   x9   y0
+ byte 5:    0    1    ?    ?    ?    ?   f1   f0
+
+This packet only appears after a position packet with the mt bit set, and
+ususally only appears when there are two or more contacts (although
+ocassionally it's seen with only a single contact).
+
+The final v3 packet type is the trackstick packet.
+
+ byte 0:    1    1   x7   y7    1    1    1    1
+ byte 1:    0   x6   x5   x4   x3   x2   x1   x0
+ byte 2:    0   y6   y5   y4   y3   y2   y1   y0
+ byte 3:    0    1    0    0    1    0    0    0
+ byte 4:    0   z4   z3   z2   z1   z0    ?    ?
+ byte 5:    0    0    1    1    1    1    1    1
+
+ALPS Absolute Mode - Protocol Version 4
+---------------------------------------
+
+Protocol version 4 has an 8-byte packet format.
+
+ byte 0:    1    ?   x1   x0    1    1    1    1
+ byte 1:    0  x10   x9   x8   x7   x6   x5   x4
+ byte 2:    0  y10   y9   y8   y7   y6   y5   y4
+ byte 3:    0    1   x3   x2   y3   y2   y1   y0
+ byte 4:    0    ?    ?    ?    1    ?    r    l
+ byte 5:    0   z6   z5   z4   z3   z2   z1   z0
+ byte 6:    bitmap data (described below)
+ byte 7:    bitmap data (described below)
+
+The last two bytes represent a partial bitmap packet, with 3 full packets
+required to construct a complete bitmap packet.  Once assembled, the 6-byte
+bitmap packet has the following format:
+
+ byte 0:    0    1   x7   x6   x5   x4   x3   x2
+ byte 1:    0   x1   x0   y4   y3   y2   y1   y0
+ byte 2:    0    0    ?  x14  x13  x12  x11  x10
+ byte 3:    0   x9   x8   y9   y8   y7   y6   y5
+ byte 4:    0    0    0    0    0    0    0    0
+ byte 5:    0    0    0    0    0    0    0  y10
+
+There are several things worth noting here.
+
+ 1) In the bitmap data, bit 6 of byte 0 serves as a sync byte to
+    identify the first fragment of a bitmap packet.
+
+ 2) The bitmaps represent the same data as in the v3 bitmap packets, although
+    the packet layout is different.
+
+ 3) There doesn't seem to be a count of the contact points anywhere in the v4
+    protocol packets. Deriving a count of contact points must be done by
+    analyzing the bitmaps.
+
+ 4) There is a 3 to 1 ratio of position packets to bitmap packets. Therefore
+    MT position can only be updated for every third ST position update, and
+    the count of contact points can only be updated every third packet as
+    well.
+
+So far no v4 devices with tracksticks have been encountered.
-- 
1.7.7.3