From 65ff02dff67bf26a9c27d9aa11a30eaf3d28469e Mon Sep 17 00:00:00 2001 From: Josh Boyer Date: Wed, 5 Oct 2011 11:29:57 -0400 Subject: [PATCH] mmc: Always check for lower base frequency quirk for Ricoh 1180:e823 Commit 15bed0f2f added a quirk for the e823 Ricoh card reader to lower the base frequency. However, the quirk first checks to see if the proprietary MMC controller is disabled, and returns if so. On some devices, such as the Lenovo X220, the MMC controller is already disabled by firmware it seems, but the frequency change is still needed so sdhci-pci can talk to the cards. Since the MMC controller is disabled, the frequency fixup was never being run on these machines. This moves the e823 check above the MMC controller check so that it always gets run. This fixes https://bugzilla.redhat.com/show_bug.cgi?id=722509 Signed-off-by: Josh Boyer --- drivers/pci/quirks.c | 28 ++++++++++++++-------------- 1 files changed, 14 insertions(+), 14 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 1196f61..cec4629 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -2745,20 +2745,6 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) /* disable must be done via function #0 */ if (PCI_FUNC(dev->devfn)) return; - - pci_read_config_byte(dev, 0xCB, &disable); - - if (disable & 0x02) - return; - - pci_read_config_byte(dev, 0xCA, &write_enable); - pci_write_config_byte(dev, 0xCA, 0x57); - pci_write_config_byte(dev, 0xCB, disable | 0x02); - pci_write_config_byte(dev, 0xCA, write_enable); - - dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); - dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); - /* * RICOH 0xe823 SD/MMC card reader fails to recognize * certain types of SD/MMC cards. Lowering the SD base @@ -2781,6 +2767,20 @@ static void ricoh_mmc_fixup_r5c832(struct pci_dev *dev) dev_notice(&dev->dev, "MMC controller base frequency changed to 50Mhz.\n"); } + + pci_read_config_byte(dev, 0xCB, &disable); + + if (disable & 0x02) + return; + + pci_read_config_byte(dev, 0xCA, &write_enable); + pci_write_config_byte(dev, 0xCA, 0x57); + pci_write_config_byte(dev, 0xCB, disable | 0x02); + pci_write_config_byte(dev, 0xCA, write_enable); + + dev_notice(&dev->dev, "proprietary Ricoh MMC controller disabled (via firewire function)\n"); + dev_notice(&dev->dev, "MMC cards are now supported by standard SDHCI controller\n"); + } DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); DECLARE_PCI_FIXUP_RESUME_EARLY(PCI_VENDOR_ID_RICOH, PCI_DEVICE_ID_RICOH_R5C832, ricoh_mmc_fixup_r5c832); -- 1.7.6.4