# We have to override the new %%install behavior because, well... the kernel is special. %global __spec_install_pre %{___build_pre} Summary: The Linux kernel # For a stable, released kernel, released_kernel should be 1. For rawhide # and/or a kernel built from an rc or git snapshot, released_kernel should # be 0. %global released_kernel 0 # Sign modules on x86. Make sure the config files match this setting if more # architectures are added. %ifarch %{ix86} x86_64 %global signkernel 1 %global signmodules 1 %global zipmodules 1 %else %global signkernel 0 %global signmodules 1 %global zipmodules 1 %endif %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' # for parallel xz processes, replace with 1 to go back to single process %global zcpu `nproc --all` %endif # define buildid .local # baserelease defines which build revision of this kernel version we're # building. We used to call this fedora_build, but the magical name # baserelease is matched by the rpmdev-bumpspec tool, which you should use. # # We used to have some extra magic weirdness to bump this automatically, # but now we don't. Just use: rpmdev-bumpspec -c 'comment for changelog' # When changing base_sublevel below or going from rc to a final kernel, # reset this by hand to 1 (or to 0 and then use rpmdev-bumpspec). # scripts/rebase.sh should be made to do that for you, actually. # # NOTE: baserelease must be > 0 or bad things will happen if you switch # to a released kernel (released version will be < rc version) # # For non-released -rc kernels, this will be appended after the rcX and # gitX tags, so a 3 here would become part of release "0.rcX.gitX.3" # %global baserelease 1 %global fedora_build %{baserelease} # base_sublevel is the kernel version we're starting with and patching # on top of -- for example, 3.1-rc7-git1 starts with a 3.0 base, # which yields a base_sublevel of 0. %define base_sublevel 3 ## If this is a released kernel ## %if 0%{?released_kernel} # Do we have a -stable update to apply? %define stable_update 0 # Set rpm version accordingly %if 0%{?stable_update} %define stablerev %{stable_update} %define stable_base %{stable_update} %endif %define rpmversion 5.%{base_sublevel}.%{stable_update} ## The not-released-kernel case ## %else # The next upstream release sublevel (base_sublevel+1) %define upstream_sublevel %(echo $((%{base_sublevel} + 1))) # The rc snapshot level %global rcrev 0 # The git snapshot level %define gitrev 6 # Set rpm version accordingly %define rpmversion 5.%{upstream_sublevel}.0 %endif # Nb: The above rcrev and gitrev values automagically define Patch00 and Patch01 below. # What parts do we want to build? We must build at least one kernel. # These are the kernels that are built IF the architecture allows it. # All should default to 1 (enabled) and be flipped to 0 (disabled) # by later arch-specific checks. # The following build options are enabled by default. # Use either --without in your rpmbuild command or force values # to 0 in here to disable them. # # standard kernel %define with_up %{?_without_up: 0} %{?!_without_up: 1} # kernel PAE (only valid for ARM (lpae)) %define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} # kernel-debug %define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} # kernel-headers %define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} %define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} # Want to build a the vsdo directories installed %define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} # # Additional options for user-friendly one-off kernel building: # # Only build the base kernel (--with baseonly): %define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} # Only build the pae kernel (--with paeonly): %define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0} # Only build the debug kernel (--with dbgonly): %define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} # # should we do C=1 builds with sparse %define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} # # Cross compile requested? %define with_cross %{?_with_cross: 1} %{?!_with_cross: 0} # # build a release kernel on rawhide %define with_release %{?_with_release: 1} %{?!_with_release: 0} # verbose build, i.e. no silent rules and V=1 %define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0} # Set debugbuildsenabled to 1 for production (build separate debug kernels) # and 0 for rawhide (all kernels are debug kernels). # See also 'make debug' and 'make release'. %define debugbuildsenabled 0 # Kernel headers are being split out into a separate package %if 0%{?fedora} %define with_headers 0 %define with_cross_headers 0 %endif %if %{with_verbose} %define make_opts V=1 %else %define make_opts -s %endif # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} # pkg_release is what we'll fill in for the rpm Release: field %if 0%{?released_kernel} %define pkg_release %{fedora_build}%{?buildid}%{?dist} %else # non-released_kernel %if 0%{?rcrev} %define rctag .rc%rcrev %else %define rctag .rc0 %endif %if 0%{?gitrev} %define gittag .git%gitrev %else %define gittag .git0 %endif %define pkg_release 0%{?rctag}%{?gittag}.%{fedora_build}%{?buildid}%{?dist} %endif # The kernel tarball/base version %define kversion 5.%{base_sublevel} %define make_target bzImage %define image_install_path boot %define KVERREL %{version}-%{release}.%{_target_cpu} %define hdrarch %_target_cpu %define asmarch %_target_cpu %if 0%{!?nopatches:1} %define nopatches 0 %endif %if %{with_vanilla} %define nopatches 1 %endif %if %{nopatches} %define variant -vanilla %endif %if !%{debugbuildsenabled} %define with_debug 0 %endif %if !%{with_debuginfo} %define _enable_debug_packages 0 %endif %define debuginfodir /usr/lib/debug # Needed because we override almost everything involving build-ids # and debuginfo generation. Currently we rely on the old alldebug setting. %global _build_id_links alldebug # kernel PAE is only built on ARMv7 %ifnarch armv7hl %define with_pae 0 %endif # if requested, only build base kernel %if %{with_baseonly} %define with_pae 0 %define with_debug 0 %endif # if requested, only build pae kernel %if %{with_paeonly} %define with_up 0 %define with_debug 0 %endif # if requested, only build debug kernel %if %{with_dbgonly} %if %{debugbuildsenabled} %define with_up 0 %define with_pae 0 %endif %define with_pae 0 %endif %define all_x86 i386 i686 %if %{with_vdso_install} %define use_vdso 1 %endif # Overrides for generic default options # don't do debug builds on anything but i686 and x86_64 %ifnarch i686 x86_64 %define with_debug 0 %endif # don't build noarch kernels or headers (duh) %ifarch noarch %define with_up 0 %define with_headers 0 %define with_cross_headers 0 %define all_arch_configs kernel-%{version}-*.config %endif # sparse blows up on ppc %ifnarch ppc64le %define with_sparse 0 %endif # Per-arch tweaks %ifarch %{all_x86} %define asmarch x86 %define hdrarch i386 %define all_arch_configs kernel-%{version}-i?86*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch x86_64 %define asmarch x86 %define all_arch_configs kernel-%{version}-x86_64*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch ppc64le %define asmarch powerpc %define hdrarch powerpc %define make_target vmlinux %define kernel_image vmlinux %define kernel_image_elf 1 %ifarch ppc64le %define all_arch_configs kernel-%{version}-ppc64le*.config %endif %endif %ifarch s390x %define asmarch s390 %define hdrarch s390 %define all_arch_configs kernel-%{version}-s390x.config %define kernel_image arch/s390/boot/bzImage %endif %ifarch %{arm} %define all_arch_configs kernel-%{version}-arm*.config %define skip_nonpae_vdso 1 %define asmarch arm %define hdrarch arm %define make_target bzImage %define kernel_image arch/arm/boot/zImage # http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html %define kernel_mflags KALLSYMS_EXTRA_PASS=1 # we only build headers/perf/tools on the base arm arches # just like we used to only build them on i386 for x86 %ifnarch armv7hl %define with_headers 0 %define with_cross_headers 0 %endif %endif %ifarch aarch64 %define all_arch_configs kernel-%{version}-aarch64*.config %define asmarch arm64 %define hdrarch arm64 %define make_target Image.gz %define kernel_image arch/arm64/boot/Image.gz %endif # Should make listnewconfig fail if there's config options # printed out? %if %{nopatches} %define listnewconfig_fail 0 %define configmismatch_fail 0 %else %define listnewconfig_fail 1 %define configmismatch_fail 1 %endif # To temporarily exclude an architecture from being built, add it to # %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we # don't build kernel-headers then the new build system will no longer let # us use the previous build of that package -- it'll just be completely AWOL. # Which is a BadThing(tm). # We only build kernel-headers on the following... %define nobuildarches i386 %ifarch %nobuildarches %define with_up 0 %define with_pae 0 %define with_debuginfo 0 %define with_debug 0 %define _enable_debug_packages 0 %endif # Architectures we build tools/cpupower on %define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64 %if %{use_vdso} %if 0%{?skip_nonpae_vdso} %define _use_vdso 0 %else %define _use_vdso 1 %endif %else %define _use_vdso 0 %endif # # Packages that need to be installed before the kernel is, because the %%post # scripts use them. # %define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install %define initrd_prereq dracut >= 027 Name: kernel%{?variant} License: GPLv2 and Redistributable, no modification permitted URL: https://www.kernel.org/ Version: %{rpmversion} Release: %{pkg_release} # DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. # SET %%nobuildarches (ABOVE) INSTEAD ExclusiveArch: x86_64 s390x %{arm} aarch64 ppc64le ExclusiveOS: Linux %ifnarch %{nobuildarches} Requires: kernel-core-uname-r = %{KVERREL}%{?variant} Requires: kernel-modules-uname-r = %{KVERREL}%{?variant} %endif # # List the packages used during the kernel build # BuildRequires: kmod, patch, bash, tar, git-core BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex BuildRequires: net-tools, hostname, bc, elfutils-devel, gcc-plugin-devel %if 0%{?fedora} # Used to mangle unversioned shebangs to be Python 3 BuildRequires: /usr/bin/pathfix.py %endif %if %{with_sparse} BuildRequires: sparse %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb %if %{with_debuginfo} BuildRequires: rpm-build, elfutils BuildConflicts: rpm < 4.13.0.1-19 # Most of these should be enabled after more investigation %undefine _include_minidebuginfo %undefine _find_debuginfo_dwz_opts %undefine _unique_build_ids %undefine _unique_debug_names %undefine _unique_debug_srcs %undefine _debugsource_packages %undefine _debuginfo_subpackages %global _find_debuginfo_opts -r %global _missing_build_ids_terminate_build 1 %global _no_recompute_build_ids 1 %endif %if %{signkernel}%{signmodules} BuildRequires: openssl openssl-devel %if %{signkernel} BuildRequires: pesign >= 0.10-4 %endif %endif %if %{with_cross} BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu %define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu- %endif Source0: https://www.kernel.org/pub/linux/kernel/v5.x/linux-%{kversion}.tar.xz Source11: x509.genkey Source12: remove-binary-diff.pl Source15: merge.pl Source16: mod-extra.list Source17: mod-extra.sh Source18: mod-sign.sh Source90: filter-x86_64.sh Source91: filter-armv7hl.sh Source92: filter-i686.sh Source93: filter-aarch64.sh Source94: filter-ppc64le.sh Source95: filter-s390x.sh Source99: filter-modules.sh %define modsign_cmd %{SOURCE18} Source20: kernel-aarch64.config Source21: kernel-aarch64-debug.config Source22: kernel-armv7hl.config Source23: kernel-armv7hl-debug.config Source24: kernel-armv7hl-lpae.config Source25: kernel-armv7hl-lpae-debug.config Source26: kernel-i686.config Source27: kernel-i686-debug.config Source30: kernel-ppc64le.config Source31: kernel-ppc64le-debug.config Source32: kernel-s390x.config Source33: kernel-s390x-debug.config Source34: kernel-x86_64.config Source35: kernel-x86_64-debug.config Source40: generate_all_configs.sh Source41: generate_debug_configs.sh Source42: process_configs.sh Source43: generate_bls_conf.sh # This file is intentionally left empty in the stock kernel. Its a nicety # added for those wanting to do custom rebuilds with altered config opts. Source1000: kernel-local # Here should be only the patches up to the upstream canonical Linus tree. # For a stable release kernel %if 0%{?stable_update} %if 0%{?stable_base} %define stable_patch_00 patch-5.%{base_sublevel}.%{stable_base}.xz Source5000: %{stable_patch_00} %endif # non-released_kernel case # These are automagically defined by the rcrev and gitrev values set up # near the top of this spec file. %else %if 0%{?rcrev} Source5000: patch-5.%{upstream_sublevel}-rc%{rcrev}.xz %if 0%{?gitrev} Source5001: patch-5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev}.xz %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} Source5000: patch-5.%{base_sublevel}-git%{gitrev}.xz %endif %endif %endif ## Patches needed for building this package ## compile fixes %if !%{nopatches} # Git trees. # Standalone patches # 100 - Generic long running patches Patch122: Input-synaptics-pin-3-touches-when-the-firmware-repo.patch # 200 - x86 / secureboot Patch201: efi-lockdown.patch # bz 1497559 - Make kernel MODSIGN code not error on missing variables Patch207: 0001-Make-get_cert_list-not-complain-about-cert-lists-tha.patch Patch208: 0002-Add-efi_status_to_str-and-rework-efi_status_to_err.patch Patch209: 0003-Make-get_cert_list-use-efi_status_to_str-to-print-er.patch Patch210: disable-i8042-check-on-apple-mac.patch Patch212: efi-secureboot.patch # 300 - ARM patches Patch300: arm64-Add-option-of-13-for-FORCE_MAX_ZONEORDER.patch # RHBZ Bug 1576593 - work around while vendor investigates Patch301: arm-make-highpte-not-expert.patch # https://patchwork.kernel.org/patch/10351797/ Patch302: ACPI-scan-Fix-regression-related-to-X-Gene-UARTs.patch # rhbz 1574718 Patch303: ACPI-irq-Workaround-firmware-issue-on-X-Gene-based-m400.patch # http://www.spinics.net/lists/linux-tegra/msg26029.html Patch304: usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch # http://patchwork.ozlabs.org/patch/587554/ Patch305: ARM-tegra-usb-no-reset.patch # https://patchwork.kernel.org/project/linux-mmc/list/?submitter=71861 Patch306: arm-sdhci-esdhc-imx-fixes.patch # Tegra bits Patch320: arm64-tegra-jetson-tx1-fixes.patch # https://www.spinics.net/lists/linux-tegra/msg43110.html Patch321: arm64-tegra-Jetson-TX2-Allow-bootloader-to-configure.patch # QCom laptop bits # https://patchwork.kernel.org/patch/11133827/ Patch330: arm64-qcom-i2c-geni-Disable-DMA-processing-on-the-Lenovo-Yoga-C630.patch # 400 - IBM (ppc/s390x) patches # 500 - Temp fixes/CVEs etc # rhbz 1431375 Patch501: input-rmi4-remove-the-need-for-artifical-IRQ.patch # gcc9 fixes Patch502: 0001-Drop-that-for-now.patch # https://bugzilla.redhat.com/show_bug.cgi?id=1701096 # Submitted upstream at https://lkml.org/lkml/2019/4/23/89 Patch503: KEYS-Make-use-of-platform-keyring-for-module-signature.patch # https://patchwork.kernel.org/patch/11158395/ Patch504: iwlwifi-fw-don-t-send-GEO_TX_POWER_LIMIT-command-to-FW-version-36.patch # END OF PATCH DEFINITIONS %endif %description The kernel meta package # # This macro does requires, provides, conflicts, obsoletes for a kernel package. # %%kernel_reqprovconf # It uses any kernel__conflicts and kernel__obsoletes # macros defined above. # %define kernel_reqprovconf \ Provides: kernel = %{rpmversion}-%{pkg_release}\ Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-drm-nouveau = 16\ Provides: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires(pre): %{kernel_prereq}\ Requires(pre): %{initrd_prereq}\ Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\ Requires(preun): systemd >= 200\ Conflicts: xfsprogs < 4.3.0-1\ Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ %{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ %{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ %{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ # We can't let RPM do the dependencies automatic because it'll then pick up\ # a correct but undesirable perl dependency from the module headers which\ # isn't required for the kernel proper to function\ AutoReq: no\ AutoProv: yes\ %{nil} %package headers Summary: Header files for the Linux kernel for use by glibc Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 %if "0%{?variant}" Obsoletes: kernel-headers < %{rpmversion}-%{pkg_release} Provides: kernel-headers = %{rpmversion}-%{pkg_release} %endif %description headers Kernel-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package. %package cross-headers Summary: Header files for the Linux kernel for use by cross-glibc %description cross-headers Kernel-cross-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the cross-glibc package. %package debuginfo-common-%{_target_cpu} Summary: Kernel source files used by %{name}-debuginfo packages Provides: installonlypkg(kernel) %description debuginfo-common-%{_target_cpu} This package is required by %{name}-debuginfo subpackages. It provides the kernel source files common to all builds. # # This macro creates a kernel--debuginfo package. # %%kernel_debuginfo_package # %define kernel_debuginfo_package() \ %package %{?1:%{1}-}debuginfo\ Summary: Debug information for package %{name}%{?1:-%{1}}\ Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ %description %{?1:%{1}-}debuginfo\ This package provides debug information for package %{name}%{?1:-%{1}}.\ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '/.*/%%{KVERREL}%{?1:[+]%{1}}/.*|/.*%%{KVERREL}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ %{nil} # # This macro creates a kernel--devel package. # %%kernel_devel_package # %define kernel_devel_package() \ %package %{?1:%{1}-}devel\ Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ Requires(pre): findutils\ Requires: findutils\ Requires: perl-interpreter\ %description %{?1:%{1}-}devel\ This package provides kernel headers and makefiles sufficient to build modules\ against the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules-extra package. # %%kernel_modules_extra_package # %define kernel_modules_extra_package() \ %package %{?1:%{1}-}modules-extra\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules package. # %%kernel_modules_package # %define kernel_modules_package() \ %package %{?1:%{1}-}modules\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\ %{nil} # # this macro creates a kernel- meta package. # %%kernel_meta_package # %define kernel_meta_package() \ %package %{1}\ summary: kernel meta-package for the %{1} kernel\ Requires: kernel-%{1}-core-uname-r = %{KVERREL}%{?variant}+%{1}\ Requires: kernel-%{1}-modules-uname-r = %{KVERREL}%{?variant}+%{1}\ Provides: installonlypkg(kernel)\ %description %{1}\ The meta-package for the %{1} kernel\ %{nil} # # This macro creates a kernel- and its -devel and -debuginfo too. # %%define variant_summary The Linux kernel compiled for # %%kernel_variant_package [-n ] # %define kernel_variant_package(n:) \ %package %{?1:%{1}-}core\ Summary: %{variant_summary}\ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?variant}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ %ifarch ppc64le\ Obsoletes: kernel-bootwrapper\ %endif\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ %endif\ %{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %{nil} # Now, each variant package. %if %{with_pae} %define variant_summary The Linux kernel compiled for Cortex-A15 %kernel_variant_package lpae %description lpae-core This package includes a version of the Linux kernel with support for Cortex-A15 devices with LPAE and HW virtualisation support %endif %define variant_summary The Linux kernel compiled with extra debugging enabled %kernel_variant_package debug %description debug-core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. # And finally the main -core package %define variant_summary The Linux kernel %kernel_variant_package %description core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. %prep # do a few sanity-checks for --with *only builds %if %{with_baseonly} %if !%{with_up}%{with_pae} echo "Cannot build --with baseonly, up build is disabled" exit 1 %endif %endif %if "%{baserelease}" == "0" echo "baserelease must be greater than zero" exit 1 %endif # more sanity checking; do it quietly if [ "%{patches}" != "%%{patches}" ] ; then for patch in %{patches} ; do if [ ! -f $patch ] ; then echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" exit 1 fi done fi 2>/dev/null # First we unpack the kernel tarball. # If this isn't the first make prep, we use links to the existing clean tarball # which speeds things up quite a bit. # Update to latest upstream. %if 0%{?released_kernel} %define vanillaversion 5.%{base_sublevel} # non-released_kernel case %else %if 0%{?rcrev} %define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev} %if 0%{?gitrev} %define vanillaversion 5.%{upstream_sublevel}-rc%{rcrev}-git%{gitrev} %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} %define vanillaversion 5.%{base_sublevel}-git%{gitrev} %else %define vanillaversion 5.%{base_sublevel} %endif %endif %endif # %%{vanillaversion} : the full version name, e.g. 2.6.35-rc6-git3 # %%{kversion} : the base version, e.g. 2.6.34 # Use kernel-%%{kversion}%%{?dist} as the top-level directory name # so we can prep different trees within a single git directory. # Build a list of the other top-level kernel tree directories. # This will be used to hardlink identical vanilla subdirs. sharedirs=$(find "$PWD" -maxdepth 1 -type d -name 'kernel-5.*' \ | grep -x -v "$PWD"/kernel-%{kversion}%{?dist}) ||: # Delete all old stale trees. if [ -d kernel-%{kversion}%{?dist} ]; then cd kernel-%{kversion}%{?dist} for i in linux-* do if [ -d $i ]; then # Just in case we ctrl-c'd a prep already rm -rf deleteme.%{_target_cpu} # Move away the stale away, and delete in background. mv $i deleteme-$i rm -rf deleteme* & fi done cd .. fi # Generate new tree if [ ! -d kernel-%{kversion}%{?dist}/vanilla-%{vanillaversion} ]; then if [ -d kernel-%{kversion}%{?dist}/vanilla-%{kversion} ]; then # The base vanilla version already exists. cd kernel-%{kversion}%{?dist} # Any vanilla-* directories other than the base one are stale. for dir in vanilla-*; do [ "$dir" = vanilla-%{kversion} ] || rm -rf $dir & done else rm -f pax_global_header # Look for an identical base vanilla dir that can be hardlinked. for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{kversion} ]] ; then %setup -q -n kernel-%{kversion}%{?dist} -c -T cp -al $sharedir/vanilla-%{kversion} . else %setup -q -n kernel-%{kversion}%{?dist} -c mv linux-%{kversion} vanilla-%{kversion} fi fi %if "%{kversion}" != "%{vanillaversion}" for sharedir in $sharedirs ; do if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then break fi done if [[ ! -z $sharedir && -d $sharedir/vanilla-%{vanillaversion} ]] ; then cp -al $sharedir/vanilla-%{vanillaversion} . else # Need to apply patches to the base vanilla version. cp -al vanilla-%{kversion} vanilla-%{vanillaversion} cd vanilla-%{vanillaversion} cp %{SOURCE12} . # Update vanilla to the latest upstream. # (non-released_kernel case only) %if 0%{?rcrev} xzcat %{SOURCE5000} | ./remove-binary-diff.pl | patch -p1 -F1 -s %if 0%{?gitrev} xzcat %{SOURCE5001} | ./remove-binary-diff.pl | patch -p1 -F1 -s %endif %else # pre-{base_sublevel+1}-rc1 case %if 0%{?gitrev} xzcat %{SOURCE5000} | ./remove-binary-diff.pl | patch -p1 -F1 -s %endif %endif git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" cd .. fi %endif else # We already have all vanilla dirs, just change to the top-level directory. cd kernel-%{kversion}%{?dist} fi # Now build the fedora kernel tree. cp -al vanilla-%{vanillaversion} linux-%{KVERREL} cd linux-%{KVERREL} if [ ! -d .git ]; then git init git config user.email "kernel-team@fedoraproject.org" git config user.name "Fedora Kernel Team" git config gc.auto 0 git add . git commit -a -q -m "baseline" fi # released_kernel with possible stable updates %if 0%{?stable_base} # This is special because the kernel spec is hell and nothing is consistent xzcat %{SOURCE5000} | patch -p1 -F1 -s git commit -a -m "Stable update" %endif # Note: Even in the "nopatches" path some patches (build tweaks and compile # fixes) will always get applied; see patch defition above for details git am %{patches} # END OF PATCH APPLICATIONS # Any further pre-build tree manipulations happen here. chmod +x scripts/checkpatch.pl chmod +x tools/objtool/sync-check.sh mv COPYING COPYING-%{version} # This Prevents scripts/setlocalversion from mucking with our version numbers. touch .scmversion # Deal with configs stuff mkdir configs cd configs # Drop some necessary files from the source dir into the buildroot cp $RPM_SOURCE_DIR/kernel-*.config . cp %{SOURCE1000} . cp %{SOURCE15} . cp %{SOURCE40} . cp %{SOURCE41} . cp %{SOURCE43} . %if !%{debugbuildsenabled} # The normal build is a really debug build and the user has explicitly requested # a release kernel. Change the config files into non-debug versions. %if !%{with_release} VERSION=%{version} ./generate_debug_configs.sh %else VERSION=%{version} ./generate_all_configs.sh %endif %else VERSION=%{version} ./generate_all_configs.sh %endif # Merge in any user-provided local config option changes %ifnarch %nobuildarches for i in %{all_arch_configs} do mv $i $i.tmp ./merge.pl %{SOURCE1000} $i.tmp > $i rm $i.tmp done %endif # only deal with configs if we are going to build for the arch %ifnarch %nobuildarches %if !%{debugbuildsenabled} rm -f kernel-%{version}-*debug.config %endif %define make make %{?cross_opts} CheckConfigs() { ./check_configs.awk $1 $2 > .mismatches if [ -s .mismatches ] then echo "Error: Mismatches found in configuration files" cat .mismatches exit 1 fi } cp %{SOURCE42} . OPTS="" %if %{listnewconfig_fail} OPTS="$OPTS -n" %endif %if %{configmismatch_fail} OPTS="$OPTS -c" %endif ./process_configs.sh $OPTS kernel %{rpmversion} # end of kernel config %endif cd .. # End of Configs stuff # get rid of unwanted files resulting from patch fuzz find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null # remove unnecessary SCM files find . -name .gitignore -delete >/dev/null %if 0%{?fedora} # Mangle /usr/bin/python shebangs to /usr/bin/python3 # Mangle all Python shebangs to be Python 3 explicitly # -p preserves timestamps # -n prevents creating ~backup files # -i specifies the interpreter for the shebang pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/ pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/diffconfig pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/bloat-o-meter pathfix.py -pni "%{__python3} %{py3_shbang_opts}" scripts/show_delta %endif cd .. ### ### build ### %build %if %{with_sparse} %define sparse_mflags C=1 %endif cp_vmlinux() { eu-strip --remove-comment -o "$2" "$1" } # These are for host programs that get built as part of the kernel and # are required to be packaged in kernel-devel for building external modules. # Since they are userspace binaries, they are required to pickup the hardening # flags defined in the macros. The --build-id=uuid is a trick to get around # debuginfo limitations: Typically, find-debuginfo.sh will update the build # id of all binaries to allow for parllel debuginfo installs. The kernel # can't use this because it breaks debuginfo for the vDSO so we have to # use a special mechanism for kernel and modules to be unique. Unfortunately, # we still have userspace binaries which need unique debuginfo and because # they come from the kernel package, we can't just use find-debuginfo.sh to # rewrite only those binaries. The easiest option right now is just to have # the build id be a uuid for the host programs. # # Note we need to disable these flags for cross builds because the flags # from redhat-rpm-config assume that host == target so target arch # flags cause issues with the host compiler. %if !%{with_cross} %define build_hostcflags %{?build_cflags} %define build_hostldflags %{?build_ldflags} -Wl,--build-id=uuid %endif BuildKernel() { MakeTarget=$1 KernelImage=$2 Flavour=$4 DoVDSO=$3 Flav=${Flavour:++${Flavour}} InstallName=${5:-vmlinuz} # Pick the right config file for the kernel we're building Config=kernel-%{version}-%{_target_cpu}${Flavour:+-${Flavour}}.config DevelDir=/usr/src/kernels/%{KVERREL}${Flav} # When the bootable image is just the ELF kernel, strip it. # We already copy the unstripped file into the debuginfo package. if [ "$KernelImage" = vmlinux ]; then CopyKernel=cp_vmlinux else CopyKernel=cp fi KernelVer=%{version}-%{release}.%{_target_cpu}${Flav} echo BUILDING A KERNEL FOR ${Flavour} %{_target_cpu}... %if 0%{?stable_update} # make sure SUBLEVEL is incremented on a stable release. Sigh 3.x. perl -p -i -e "s/^SUBLEVEL.*/SUBLEVEL = %{?stablerev}/" Makefile %endif # make sure EXTRAVERSION says what we want it to say # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r") perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Flav}/" Makefile # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme %if !0%{?rcrev} %if 0%{?gitrev} perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{upstream_sublevel}/' Makefile %endif %endif # and now to start the build process make %{?make_opts} mrproper cp configs/$Config .config %if %{signkernel}%{signmodules} cp %{SOURCE11} certs/. %endif Arch=`head -1 .config | cut -b 3-` echo USING ARCH=$Arch make %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch olddefconfig # This ensures build-ids are unique to allow parallel debuginfo perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config %{make} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags} %{make} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" ARCH=$Arch %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 mkdir -p $RPM_BUILD_ROOT/%{image_install_path} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer %if %{with_debuginfo} mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} %endif %ifarch %{arm} aarch64 %{make} %{?make_opts} ARCH=$Arch dtbs dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb find arch/$Arch/boot/dts -name '*.dtb' -type f -delete %endif # Start installing the results install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map # We estimate the size of the initramfs because rpm needs to take this size # into consideration when performing disk space calculations. (See bz #530778) dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 if [ -f arch/$Arch/boot/zImage.stub ]; then cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || : fi %if %{signkernel} # Sign the image if we're using EFI %pesign -s -i $KernelImage -o vmlinuz.signed if [ ! -s vmlinuz.signed ]; then echo "pesigning failed" exit 1 fi mv vmlinuz.signed $KernelImage %endif $CopyKernel $KernelImage \ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName # hmac sign the kernel for FIPS echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac" ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac; cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac # Override $(mod-fw) because we don't want it to install any firmware # we'll get it from the linux-firmware package and we don't want conflicts %{make} %{?make_opts} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT modules_install KERNELRELEASE=$KernelVer mod-fw= # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files echo '%%defattr(-,-,-)' > ../kernel${Flavour:+-${Flavour}}-ldsoconf.list if [ $DoVDSO -ne 0 ]; then %{make} %{?make_opts} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer if [ -s ldconfig-kernel.conf ]; then install -D -m 444 ldconfig-kernel.conf \ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Flavour:+-${Flavour}}-ldsoconf.list fi rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id fi # And save the headers/makefiles etc for building modules against # # This all looks scary, but the end result is supposed to be: # * all arch relevant include/ files # * all Makefile/Kconfig files # * all script/ files rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) # dirs for additional modules per module-init-tools, kbuild/modules.txt mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/extra mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates # first copy everything cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -s Module.markers ]; then cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build fi # then drop all but the needed Makefiles/Kconfig files rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Documentation rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -f tools/objtool/objtool ]; then cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : # these are a few files associated with objtool cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # also more than necessary but it's not that many more files cp -a --parents tools/objtool/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/lib/str_error_r.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/lib/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/lib/subcmd/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi if [ -d arch/$Arch/scripts ]; then cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : fi if [ -f arch/$Arch/*lds ]; then cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : fi if [ -f arch/%{asmarch}/kernel/module.lds ]; then cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*.o rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/*/*.o %ifarch ppc64le cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif if [ -d arch/%{asmarch}/include ]; then cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi %ifarch aarch64 # arch/arm64/include/asm/xen references arch/arm cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # arch/arm64/include/asm/opcodes.h references arch/arm cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # include the machine specific headers for ARM variants, if available. %ifarch %{arm} if [ -d arch/%{asmarch}/mach-${Flavour}/include ]; then cp -a --parents arch/%{asmarch}/mach-${Flavour}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi # include a few files for 'make prepare' cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include %ifarch %{ix86} x86_64 # files for 'make prepare' to succeed with kernel-devel cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # Yes this is more includes than we probably need. Feel free to sort out # dependencies if you so choose. cp -a --parents tools/include/* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # Make sure the Makefile and version.h have a matching timestamp so that # external modules can be built touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf %if %{with_debuginfo} eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id # # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm # mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer %endif find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames # mark modules executable so that strip-to-file can strip them xargs --no-run-if-empty chmod u+x < modnames # Generate a list of modules for block and networking. grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef collect_modules_list() { sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 if [ ! -z "$3" ]; then sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 fi } collect_modules_list networking \ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' collect_modules_list block \ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' collect_modules_list drm \ 'drm_open|drm_init' collect_modules_list modesetting \ 'drm_crtc_init' # detect missing or incorrect license tags ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \ grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Call the modules-extra script to move things around %{SOURCE17} $RPM_BUILD_ROOT/lib/modules/$KernelVer %{SOURCE16} # # Generate the kernel-core and kernel-modules files lists # # Copy the System.map file for depmod to use, and create a backup of the # full module tree so we can restore it after we're done filtering cp System.map $RPM_BUILD_ROOT/. pushd $RPM_BUILD_ROOT mkdir restore cp -r lib/modules/$KernelVer/* restore/. # don't include anything going into k-m-e in the file lists rm -rf lib/modules/$KernelVer/extra # Find all the module files and filter them out into the core and modules # lists. This actually removes anything going into -modules from the dir. find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list cp $RPM_SOURCE_DIR/filter-*.sh . %{SOURCE99} modules.list %{_target_cpu} rm filter-*.sh # Run depmod on the resulting module tree and make sure it isn't broken depmod -b . -aeF ./System.map $KernelVer &> depmod.out if [ -s depmod.out ]; then echo "Depmod failure" cat depmod.out exit 1 else rm depmod.out fi # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias*,builtin.bin,dep*,*map,symbols*,devname,softdep} popd # Go back and find all of the various directories in the tree. We use this # for the dir lists in kernel-core find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list # Cleanup rm System.map cp -r restore/* lib/modules/$KernelVer/. rm -rf restore popd # Make sure the files lists start with absolute paths or rpmbuild fails. # Also add in the dir entries sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Flavour:+-${Flavour}}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Flavour:+-${Flavour}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Flavour:+-${Flavour}}-core.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/module-dirs.list %if %{signmodules} # Save the signing keys so we can sign the modules in __modsign_install_post cp certs/signing_key.pem certs/signing_key.pem.sign${Flav} cp certs/signing_key.x509 certs/signing_key.x509.sign${Flav} %endif # Move the devel headers out of the root file system mkdir -p $RPM_BUILD_ROOT/usr/src/kernels mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir # This is going to create a broken link during the build, but we don't use # it after this point. We need the link to actually point to something # when kernel-devel is installed, and a relative link doesn't work across # the F17 UsrMove feature. ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build # prune junk from kernel-devel find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete # build a BLS config for this kernel %{SOURCE43} "$KernelVer" "$RPM_BUILD_ROOT" "%{?variant}" } ### # DO it... ### # prepare directories rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} cd linux-%{KVERREL} %if %{with_debug} BuildKernel %make_target %kernel_image %{_use_vdso} debug %endif %if %{with_pae} BuildKernel %make_target %kernel_image %{use_vdso} lpae %endif %if %{with_up} BuildKernel %make_target %kernel_image %{_use_vdso} %endif # In the modsign case, we do 3 things. 1) We check the "flavour" and hard # code the value in the following invocations. This is somewhat sub-optimal # but we're doing this inside of an RPM macro and it isn't as easy as it # could be because of that. 2) We restore the .tmp_versions/ directory from # the one we saved off in BuildKernel above. This is to make sure we're # signing the modules we actually built/installed in that flavour. 3) We # grab the arch and invoke mod-sign.sh command to actually sign the modules. # # We have to do all of those things _after_ find-debuginfo runs, otherwise # that will strip the signature off of the modules. %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ if [ "%{with_pae}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \ fi \ if [ "%{with_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \ fi \ if [ "%{with_up}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P%{zcpu} xz; \ fi \ %{nil} ### ### Special hacks for debuginfo subpackages. ### # This macro is used by %%install, so we must redefine it before that. %define debug_package %{nil} %if %{with_debuginfo} %ifnarch noarch %global __debug_package 1 %files -f debugfiles.list debuginfo-common-%{_target_cpu} %endif %endif # # Disgusting hack alert! We need to ensure we sign modules *after* all # invocations of strip occur, which is in __debug_install_post if # find-debuginfo.sh runs, and __os_install_post if not. # %define __spec_install_post \ %{?__debug_package:%{__debug_install_post}}\ %{__arch_install_post}\ %{__os_install_post}\ %{__modsign_install_post} ### ### install ### %install cd linux-%{KVERREL} # We have to do the headers install before the tools install because the # kernel headers_install will remove any header files in /usr/include that # it doesn't install itself. %if %{with_headers} # Install kernel headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install find $RPM_BUILD_ROOT/usr/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete %endif %if %{with_cross_headers} mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers make ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers headers_install_all find $RPM_BUILD_ROOT/usr/tmp-headers/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete # Copy all the architectures we care about to their respective asm directories for arch in arm arm64 powerpc s390 x86 ; do mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include mv $RPM_BUILD_ROOT/usr/tmp-headers/include/arch-${arch}/asm $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/ cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-generic $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/. done # Remove the rest of the architectures rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/arch* rm -rf $RPM_BUILD_ROOT/usr/tmp-headers/include/asm-* # Copy the rest of the headers over for arch in arm arm64 powerpc s390 x86 ; do cp -a $RPM_BUILD_ROOT/usr/tmp-headers/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/. done rm -rf $RPM_BUILD_ROOT/usr/tmp-headers %endif ### ### clean ### ### ### scripts ### # # This macro defines a %%post script for a kernel*-devel package. # %%kernel_devel_post [] # %define kernel_devel_post() \ %{expand:%%post %{?1:%{1}-}devel}\ if [ -f /etc/sysconfig/kernel ]\ then\ . /etc/sysconfig/kernel || exit $?\ fi\ if [ "$HARDLINK" != "no" -a -x /usr/sbin/hardlink ]\ then\ (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ /usr/bin/find . -type f | while read f; do\ hardlink -c /usr/src/kernels/*.fc*.*/$f $f\ done)\ fi\ %{nil} # # This macro defines a %%post script for a kernel*-modules-extra package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_extra_post [] # %define kernel_modules_extra_post() \ %{expand:%%post %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_post [] # %define kernel_modules_post() \ %{expand:%%post %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # This macro defines a %%posttrans script for a kernel package. # %%kernel_variant_posttrans [] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} # # This macro defines a %%post script for a kernel package and its devel package. # %%kernel_variant_post [-v ] [-r ] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_post(v:r:) \ %{expand:%%kernel_devel_post %{?-v*}}\ %{expand:%%kernel_modules_post %{?-v*}}\ %{expand:%%kernel_modules_extra_post %{?-v*}}\ %{expand:%%kernel_variant_posttrans %{?-v*}}\ %{expand:%%post %{?-v*:%{-v*}-}core}\ %{-r:\ if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ [ -f /etc/sysconfig/kernel ]; then\ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ fi}\ %{nil} # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun # %define kernel_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} %kernel_variant_preun %kernel_variant_post -r kernel-smp %if %{with_pae} %kernel_variant_preun lpae %kernel_variant_post -v lpae -r (kernel|kernel-smp) %endif %kernel_variant_preun debug %kernel_variant_post -v debug if [ -x /sbin/ldconfig ] then /sbin/ldconfig -X || exit $? fi ### ### file lists ### %if %{with_headers} %files headers /usr/include/* %endif %if %{with_cross_headers} %files cross-headers /usr/*-linux-gnu/include/* %endif # empty meta-package %files # This is %%{image_install_path} on an arch where that includes ELF files, # or empty otherwise. %define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} # # This macro defines the %%files sections for a kernel package # and its devel and debuginfo packages. # %%kernel_variant_files [-k vmlinux] # %define kernel_variant_files(k:) \ %if %{2}\ %{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\ %{!?_licensedir:%global license %%doc}\ %license linux-%{KVERREL}/COPYING-%{version}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ %ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \ %ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \ %ifarch %{arm} aarch64\ /lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \ %ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \ %endif\ %attr(600,root,root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\ %ghost /boot/System.map-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/config\ %ghost /boot/config-%{KVERREL}%{?3:+%{3}}\ %ghost /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\ %dir /lib/modules\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\ /lib/modules/%{KVERREL}%{?3:+%{3}}/build\ /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/bls.conf\ %if %{1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\ %endif\ /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\ %{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\ %{expand:%%files %{?3:%{3}-}devel}\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ %{expand:%%files %{?3:%{3}-}modules-extra}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/extra\ %if %{with_debuginfo}\ %ifnarch noarch\ %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ %endif\ %endif\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ %endif\ %{nil} %kernel_variant_files %{_use_vdso} %{with_up} %kernel_variant_files %{_use_vdso} %{with_debug} debug %kernel_variant_files %{use_vdso} %{with_pae} lpae # plz don't put in a version string unless you're going to tag # and build. # # %changelog * Tue Sep 24 2019 Jeremy Cline - 5.4.0-0.rc0.git6.1 - Linux v5.3-12025-g4c07e2ddab5b * Mon Sep 23 2019 Jeremy Cline - 5.4.0-0.rc0.git5.1 - Linux v5.3-11768-g619e17cf75dd * Fri Sep 20 2019 Jeremy Cline - 5.4.0-0.rc0.git4.1 - Linux v5.3-10169-g574cc4539762 * Thu Sep 19 2019 Jeremy Cline - 5.4.0-0.rc0.git3.1 - Linux v5.3-7639-gb41dae061bbd * Wed Sep 18 2019 Jeremy Cline - 5.4.0-0.rc0.git2.1 - Linux v5.3-3839-g35f7a9526615 * Tue Sep 17 2019 Jeremy Cline - 5.4.0-0.rc0.git1.1 - Linux v5.3-2061-gad062195731b * Tue Sep 17 2019 Jeremy Cline - Reenable debugging options. * Mon Sep 16 2019 Laura Abbott - 5.3.0-1 - Linux v5.3 * Tue Sep 10 2019 Laura Abbott - 5.3.0-0.rc8.git0.1 - Linux v5.3-rc8 * Tue Sep 10 2019 Laura Abbott - Disable debugging options. * Thu Sep 05 2019 Laura Abbott - 5.3.0-0.rc7.git1.1 - Linux v5.3-rc7-2-g3b47fd5ca9ea * Thu Sep 05 2019 Laura Abbott - Reenable debugging options. * Tue Sep 03 2019 Laura Abbott - 5.3.0-0.rc7.git0.1 - Linux v5.3-rc7 * Tue Sep 03 2019 Laura Abbott - Disable debugging options. * Thu Aug 29 2019 Laura Abbott - 5.3.0-0.rc6.git2.1 - Linux v5.3-rc6-119-g9cf6b756cdf2 * Wed Aug 28 2019 Laura Abbott - 5.3.0-0.rc6.git1.1 - Linux v5.3-rc6-115-g9e8312f5e160 * Wed Aug 28 2019 Laura Abbott - Reenable debugging options. * Mon Aug 26 2019 Laura Abbott - 5.3.0-0.rc6.git0.1 - Linux v5.3-rc6 * Mon Aug 26 2019 Laura Abbott - Disable debugging options. * Fri Aug 23 2019 Laura Abbott - 5.3.0-0.rc5.git2.1 - Linux v5.3-rc5-224-gdd469a456047 * Thu Aug 22 2019 Laura Abbott - 5.3.0-0.rc5.git1.1 - Linux v5.3-rc5-149-gbb7ba8069de9 * Thu Aug 22 2019 Laura Abbott - Reenable debugging options. * Mon Aug 19 2019 Laura Abbott - 5.3.0-0.rc5.git0.1 - Linux v5.3-rc5 * Mon Aug 19 2019 Laura Abbott - Disable debugging options. * Fri Aug 16 2019 Laura Abbott - 5.3.0-0.rc4.git3.1 - Linux v5.3-rc4-71-ga69e90512d9d * Thu Aug 15 2019 Laura Abbott - 5.3.0-0.rc4.git2.1 - Linux v5.3-rc4-53-g41de59634046 * Wed Aug 14 2019 Laura Abbott - 5.3.0-0.rc4.git1.1 - Linux v5.3-rc4-4-gee1c7bd33e66 * Wed Aug 14 2019 Laura Abbott - Reenable debugging options. * Tue Aug 13 2019 Laura Abbott - 5.3.0-0.rc4.git0.1 - Linux v5.3-rc4 * Tue Aug 13 2019 Laura Abbott - Disable debugging options. * Wed Aug 07 2019 Laura Abbott - 5.3.0-0.rc3.git1.1 - Linux v5.3-rc3-282-g33920f1ec5bf * Wed Aug 07 2019 Laura Abbott - Reenable debugging options. * Mon Aug 05 2019 Laura Abbott - 5.3.0-0.rc3.git0.1 - Linux v5.3-rc3 * Mon Aug 05 2019 Laura Abbott - Disable debugging options. * Fri Aug 02 2019 Laura Abbott - 5.3.0-0.rc2.git4.1 - Linux v5.3-rc2-70-g1e78030e5e5b * Thu Aug 01 2019 Laura Abbott - 5.3.0-0.rc2.git3.1 - Linux v5.3-rc2-60-g5c6207539aea - Enable 8250 serial ports on powerpc * Wed Jul 31 2019 Peter Robinson 5.3.0-0.rc2.git2.2 - Enable IMA Appraisal * Wed Jul 31 2019 Laura Abbott - 5.3.0-0.rc2.git2.1 - Linux v5.3-rc2-51-g4010b622f1d2 * Tue Jul 30 2019 Laura Abbott - 5.3.0-0.rc2.git1.1 - Linux v5.3-rc2-11-g2a11c76e5301 * Tue Jul 30 2019 Laura Abbott - Reenable debugging options. * Mon Jul 29 2019 Laura Abbott - 5.3.0-0.rc2.git0.1 - Linux v5.3-rc2 * Mon Jul 29 2019 Laura Abbott - Disable debugging options. * Fri Jul 26 2019 Laura Abbott - 5.3.0-0.rc1.git4.1 - Linux v5.3-rc1-96-g6789f873ed37 - Enable nvram driver (rhbz 1732612) * Thu Jul 25 2019 Laura Abbott - 5.3.0-0.rc1.git3.1 - Linux v5.3-rc1-82-gbed38c3e2dca * Wed Jul 24 2019 Laura Abbott - 5.3.0-0.rc1.git2.1 - Linux v5.3-rc1-59-gad5e427e0f6b * Tue Jul 23 2019 Laura Abbott - 5.3.0-0.rc1.git1.1 - Linux v5.3-rc1-56-g7b5cf701ea9c * Tue Jul 23 2019 Laura Abbott - Reenable debugging options. * Sun Jul 21 2019 Laura Abbott - 5.3.0-0.rc1.git0.1 - Linux v5.3-rc1 * Sun Jul 21 2019 Laura Abbott - Disable debugging options. * Fri Jul 19 2019 Peter Robinson - RHBZ Bug 1576593 - work around while vendor investigates * Thu Jul 18 2019 Laura Abbott - 5.3.0-0.rc0.git7.1 - Linux v5.2-11564-g22051d9c4a57 * Wed Jul 17 2019 Laura Abbott - 5.3.0-0.rc0.git6.1 - Linux v5.2-11043-g0a8ad0ffa4d8 * Tue Jul 16 2019 Jeremy Cline - Fix a firmware crash in Intel 7000 and 8000 devices (rhbz 1716334) * Tue Jul 16 2019 Laura Abbott - 5.3.0-0.rc0.git5.1 - Linux v5.2-10808-g9637d517347e * Fri Jul 12 2019 Justin M. Forbes - Turn off i686 builds * Fri Jul 12 2019 Laura Abbott - 5.3.0-0.rc0.git4.1 - Linux v5.2-7109-gd7d170a8e357 * Thu Jul 11 2019 Laura Abbott - 5.3.0-0.rc0.git3.1 - Linux v5.2-3311-g5450e8a316a6 * Wed Jul 10 2019 Laura Abbott - 5.3.0-0.rc0.git2.1 - Linux v5.2-3135-ge9a83bd23220 * Tue Jul 09 2019 Laura Abbott - 5.3.0-0.rc0.git1.1 - Linux v5.2-915-g5ad18b2e60b7 * Tue Jul 09 2019 Laura Abbott - Reenable debugging options. * Mon Jul 08 2019 Justin M. Forbes - 5.2.0-1 - Linux v5.2.0 - Disable debugging options. * Wed Jul 03 2019 Justin M. Forbes - 5.2.0-0.rc7.git1.1 - Linux v5.2-rc7-8-geca94432934f - Reenable debugging options. * Mon Jul 01 2019 Justin M. Forbes - 5.2.0-0.rc7.git0.1 - Linux v5.2-rc7 * Mon Jul 01 2019 Justin M. Forbes - Disable debugging options. * Fri Jun 28 2019 Justin M. Forbes - 5.2.0-0.rc6.git2.1 - Linux v5.2-rc6-93-g556e2f6020bf * Tue Jun 25 2019 Justin M. Forbes - 5.2.0-0.rc6.git1.1 - Linux v5.2-rc6-15-g249155c20f9b - Reenable debugging options. * Mon Jun 24 2019 Justin M. Forbes - 5.2.0-0.rc6.git0.1 - Linux v5.2-rc6 * Mon Jun 24 2019 Justin M. Forbes - Disable debugging options. * Sat Jun 22 2019 Peter Robinson - QCom ACPI fixes * Fri Jun 21 2019 Justin M. Forbes - 5.2.0-0.rc5.git4.1 - Linux v5.2-rc5-290-g4ae004a9bca8 * Thu Jun 20 2019 Justin M. Forbes - 5.2.0-0.rc5.git3.1 - Linux v5.2-rc5-239-g241e39004581 * Wed Jun 19 2019 Justin M. Forbes - 5.2.0-0.rc5.git2.1 - Linux v5.2-rc5-224-gbed3c0d84e7e * Tue Jun 18 2019 Justin M. Forbes - 5.2.0-0.rc5.git1.1 - Linux v5.2-rc5-177-g29f785ff76b6 - Reenable debugging options. * Mon Jun 17 2019 Justin M. Forbes - 5.2.0-0.rc5.git0.1 - Linux v5.2-rc5 * Mon Jun 17 2019 Justin M. Forbes - Disable debugging options. * Fri Jun 14 2019 Justin M. Forbes - 5.2.0-0.rc4.git3.1 - Linux v5.2-rc4-129-g72a20cee5d99 * Fri Jun 14 2019 Jeremy Cline - Fix the long-standing bluetooth breakage * Fri Jun 14 2019 Hans de Goede - Fix the LCD panel an Asus EeePC 1025C not lighting up (rhbz#1697069) - Add small bugfix for new Logitech wireless keyboard support * Thu Jun 13 2019 Justin M. Forbes - 5.2.0-0.rc4.git2.1 - Linux v5.2-rc4-45-gc11fb13a117e * Wed Jun 12 2019 Peter Robinson - Raspberry Pi: move to cpufreq driver accepted for upstream \o/ * Wed Jun 12 2019 Justin M. Forbes - 5.2.0-0.rc4.git1.1 - Linux v5.2-rc4-20-gaa7235483a83 - Reenable debugging options. * Mon Jun 10 2019 Justin M. Forbes - 5.2.0-0.rc4.git0.1 - Linux v5.2-rc4 * Mon Jun 10 2019 Justin M. Forbes - Disable debugging options. * Fri Jun 07 2019 Justin M. Forbes - 5.2.0-0.rc3.git3.1 - Linux v5.2-rc3-77-g16d72dd4891f * Thu Jun 06 2019 Jeremy Cline - Fix incorrect permission denied with lock down off (rhbz 1658675) * Thu Jun 06 2019 Justin M. Forbes - 5.2.0-0.rc3.git2.1 - Linux v5.2-rc3-37-g156c05917e09 * Tue Jun 04 2019 Justin M. Forbes - 5.2.0-0.rc3.git1.1 - Linux v5.2-rc3-24-g788a024921c4 - Reenable debugging options. * Mon Jun 03 2019 Justin M. Forbes - 5.2.0-0.rc3.git0.1 - Linux v5.2-rc3 * Mon Jun 03 2019 Justin M. Forbes - Disable debugging options. * Fri May 31 2019 Peter Robinson 5.2.0-0.rc2.git1.2 - Bump for ARMv7 fix * Thu May 30 2019 Justin M. Forbes - 5.2.0-0.rc2.git1.1 - Linux v5.2-rc2-24-gbec7550cca10 - Reenable debugging options. * Mon May 27 2019 Justin M. Forbes - 5.2.0-0.rc2.git0.1 - Linux v5.2-rc2 * Mon May 27 2019 Justin M. Forbes - Disable debugging options. * Fri May 24 2019 Justin M. Forbes - 5.2.0-0.rc1.git3.1 - Linux v5.2-rc1-233-g0a72ef899014 * Wed May 22 2019 Justin M. Forbes - 5.2.0-0.rc1.git2.1 - Linux v5.2-rc1-165-g54dee406374c * Tue May 21 2019 Justin M. Forbes - 5.2.0-0.rc1.git1.1 - Linux v5.2-rc1-129-g9c7db5004280 * Tue May 21 2019 Justin M. Forbes - 5.2.0-0.rc1.git0.2 - Reenable debugging options. * Mon May 20 2019 Justin M. Forbes - 5.2.0-0.rc1.git0.1 - Disable debugging options. - Linux V5.2-rc1 * Sun May 19 2019 Peter Robinson - Arm config updates * Fri May 17 2019 Justin M. Forbes - 5.2.0-0.rc0.git9.1 - Linux v5.1-12505-g0ef0fd351550 * Thu May 16 2019 Justin M. Forbes - 5.2.0-0.rc0.git8.1 - Linux v5.1-12065-g8c05f3b965da * Wed May 15 2019 Justin M. Forbes - 5.2.0-0.rc0.git7.1 - Linux v5.1-10909-g2bbacd1a9278 * Tue May 14 2019 Justin M. Forbes - 5.2.0-0.rc0.git6.1 - Linux v5.1-10326-g7e9890a3500d * Mon May 13 2019 Justin M. Forbes - 5.2.0-0.rc0.git5.1 - Linux v5.1-10135-ga13f0655503a * Fri May 10 2019 Justin M. Forbes - 5.2.0-0.rc0.git4.1 - Linux v5.1-9573-gb970afcfcabd * Thu May 09 2019 Justin M. Forbes - 5.2.0-0.rc0.git3.1 - Linux v5.1-8122-ga2d635decbfa * Wed May 08 2019 Justin M. Forbes - 5.2.0-0.rc0.git2.1 - Linux v5.1-5445-g80f232121b69 * Tue May 07 2019 Justin M. Forbes - 5.2.0-0.rc0.git1.1 - Linux v5.1-1199-g71ae5fc87c34 - Reenable debugging options. * Mon May 6 2019 Peter Robinson - Enable Arm STM32MP1 * Mon May 06 2019 Jeremy Cline - 5.1.0-1 - Linux v5.1 * Fri May 03 2019 Jeremy Cline - 5.1.0-0.rc7.git4.1 - Linux v5.1-rc7-131-gea9866793d1e * Thu May 02 2019 Jeremy Cline - 5.1.0-0.rc7.git3.1 - Linux v5.1-rc7-29-g600d7258316d * Wed May 01 2019 Jeremy Cline - 5.1.0-0.rc7.git2.1 - Linux v5.1-rc7-16-gf2bc9c908dfe * Tue Apr 30 2019 Jeremy Cline - 5.1.0-0.rc7.git1.1 - Linux v5.1-rc7-5-g83a50840e72a * Tue Apr 30 2019 Jeremy Cline - Reenable debugging options. * Tue Apr 30 2019 Hans de Goede - Fix wifi on various ideapad models not working (rhbz#1703338) * Mon Apr 29 2019 Jeremy Cline - 5.1.0-0.rc7.git0.1 - Linux v5.1-rc7 * Mon Apr 29 2019 Jeremy Cline - Disable debugging options. * Fri Apr 26 2019 Jeremy Cline - 5.1.0-0.rc6.git4.1 - Linux v5.1-rc6-72-g8113a85f8720 * Thu Apr 25 2019 Jeremy Cline - 5.1.0-0.rc6.git3.1 - Linux v5.1-rc6-64-gcd8dead0c394 * Thu Apr 25 2019 Justin M. Forbes - Fix CVE-2019-3900 (rhbz 1698757 1702940) * Wed Apr 24 2019 Jeremy Cline - 5.1.0-0.rc6.git2.1 - Linux v5.1-rc6-15-gba25b50d582f * Tue Apr 23 2019 Jeremy Cline - 5.1.0-0.rc6.git1.1 - Linux v5.1-rc6-4-g7142eaa58b49 * Tue Apr 23 2019 Jeremy Cline - Reenable debugging options. * Tue Apr 23 2019 Jeremy Cline - Allow modules signed by keys in the platform keyring (rbhz 1701096) * Mon Apr 22 2019 Jeremy Cline - 5.1.0-0.rc6.git0.1 - Linux v5.1-rc6 * Mon Apr 22 2019 Jeremy Cline - Disable debugging options. * Wed Apr 17 2019 Jeremy Cline - 5.1.0-0.rc5.git2.1 - Linux v5.1-rc5-36-g444fe9913539 * Tue Apr 16 2019 Jeremy Cline - 5.1.0-0.rc5.git1.1 - Linux v5.1-rc5-10-g618d919cae2f * Tue Apr 16 2019 Jeremy Cline - Reenable debugging options. * Mon Apr 15 2019 Jeremy Cline - 5.1.0-0.rc5.git0.1 - Linux v5.1-rc5 * Mon Apr 15 2019 Jeremy Cline - Disable debugging options. * Fri Apr 12 2019 Jeremy Cline - 5.1.0-0.rc4.git4.1 - Linux v5.1-rc4-184-g8ee15f324866 * Thu Apr 11 2019 Jeremy Cline - 5.1.0-0.rc4.git3.1 - Linux v5.1-rc4-58-g582549e3fbe1 * Wed Apr 10 2019 Jeremy Cline - 5.1.0-0.rc4.git2.1 - Linux v5.1-rc4-43-g771acc7e4a6e * Tue Apr 09 2019 Jeremy Cline - 5.1.0-0.rc4.git1.1 - Linux v5.1-rc4-34-g869e3305f23d * Tue Apr 09 2019 Jeremy Cline - Reenable debugging options. * Mon Apr 08 2019 Jeremy Cline - 5.1.0-0.rc4.git0.1 - Linux v5.1-rc4 * Mon Apr 08 2019 Jeremy Cline - Disable debugging options. * Fri Apr 05 2019 Jeremy Cline - 5.1.0-0.rc3.git3.1 - Linux v5.1-rc3-206-gea2cec24c8d4 * Wed Apr 03 2019 Jeremy Cline - 5.1.0-0.rc3.git2.1 - Linux v5.1-rc3-35-g8ed86627f715 * Tue Apr 02 2019 Jeremy Cline - 5.1.0-0.rc3.git1.1 - Linux v5.1-rc3-14-g5e7a8ca31926 * Tue Apr 02 2019 Jeremy Cline - Reenable debugging options. * Mon Apr 01 2019 Jeremy Cline - 5.1.0-0.rc3.git0.1 - Linux v5.1-rc3 * Mon Apr 01 2019 Jeremy Cline - Disable debugging options. * Fri Mar 29 2019 Jeremy Cline - 5.1.0-0.rc2.git4.1 - Linux v5.1-rc2-247-g9936328b41ce - Pick up a mm fix causing hangs (rhbz 1693525) * Thu Mar 28 2019 Jeremy Cline - 5.1.0-0.rc2.git3.1 - Linux v5.1-rc2-243-g8c7ae38d1ce1 * Wed Mar 27 2019 Jeremy Cline - 5.1.0-0.rc2.git2.1 - Linux v5.1-rc2-24-g14c741de9386 * Wed Mar 27 2019 Jeremy Cline - Build iptable_filter as module * Tue Mar 26 2019 Jeremy Cline - 5.1.0-0.rc2.git1.1 - Linux v5.1-rc2-16-g65ae689329c5 * Tue Mar 26 2019 Jeremy Cline - Reenable debugging options. * Tue Mar 26 2019 Peter Robinson - Initial NXP i.MX8 enablement * Mon Mar 25 2019 Jeremy Cline - 5.1.0-0.rc2.git0.1 - Linux v5.1-rc2 * Mon Mar 25 2019 Jeremy Cline - Disable debugging options. * Sat Mar 23 2019 Peter Robinson - Fixes for Tegra Jetson TX series - Initial support for NVIDIA Jetson Nano * Fri Mar 22 2019 Jeremy Cline - 5.1.0-0.rc1.git2.1 - Linux v5.1-rc1-66-gfd1f297b794c * Wed Mar 20 2019 Jeremy Cline - 5.1.0-0.rc1.git1.1 - Linux v5.1-rc1-15-gbabf09c3837f - Reenable debugging options. * Wed Mar 20 2019 Hans de Goede - Make the mainline vboxguest drv feature set match VirtualBox 6.0.x (#1689750) * Mon Mar 18 2019 Jeremy Cline - 5.1.0-0.rc1.git0.1 - Linux v5.1-rc1 * Mon Mar 18 2019 Jeremy Cline - Disable debugging options. * Sun Mar 17 2019 Peter Robinson - Updates for Arm * Fri Mar 15 2019 Jeremy Cline - 5.1.0-0.rc0.git9.1 - Linux v5.0-11520-gf261c4e529da * Thu Mar 14 2019 Jeremy Cline - 5.1.0-0.rc0.git8.1 - Linux v5.0-11139-gfa3d493f7a57 * Wed Mar 13 2019 Jeremy Cline - 5.1.0-0.rc0.git7.1 - Linux v5.0-11053-gebc551f2b8f9 * Tue Mar 12 2019 Jeremy Cline - 5.1.0-0.rc0.git6.1 - Linux v5.0-10742-gea295481b6e3 * Tue Mar 12 2019 Peter Robinson - Arm config updates and fixes * Mon Mar 11 2019 Jeremy Cline - 5.1.0-0.rc0.git5.1 - Linux v5.0-10360-g12ad143e1b80 * Fri Mar 08 2019 Jeremy Cline - 5.1.0-0.rc0.git4.1 - Linux v5.0-7001-g610cd4eadec4 * Thu Mar 07 2019 Jeremy Cline - 5.1.0-0.rc0.git3.1 - Linux v5.0-6399-gf90d64483ebd * Wed Mar 06 2019 Jeremy Cline - 5.1.0-0.rc0.git2.1 - Linux v5.0-3452-g3717f613f48d * Tue Mar 05 2019 Jeremy Cline - 5.1.0-0.rc0.git1.1 - Linux v5.0-510-gcd2a3bf02625 * Tue Mar 05 2019 Jeremy Cline - Reenable debugging options. * Mon Mar 04 2019 Laura Abbott - 5.0.0-1 - Linux v5.0.0 * Tue Feb 26 2019 Laura Abbott - 5.0.0-0.rc8.git1.1 - Linux v5.0-rc8-3-g7d762d69145a * Tue Feb 26 2019 Laura Abbott - Reenable debugging options. * Mon Feb 25 2019 Laura Abbott - 5.0.0-0.rc8.git0.1 - Linux v5.0-rc8 - Disable debugging options. * Fri Feb 22 2019 Laura Abbott - 5.0.0-0.rc7.git3.1 - Linux v5.0-rc7-118-g8a61716ff2ab * Wed Feb 20 2019 Peter Robinson - Improvements to 96boards Rock960 * Wed Feb 20 2019 Laura Abbott - 5.0.0-0.rc7.git2.1 - Linux v5.0-rc7-85-g2137397c92ae * Tue Feb 19 2019 Laura Abbott - 5.0.0-0.rc7.git1.1 - Linux v5.0-rc7-11-gb5372fe5dc84 * Tue Feb 19 2019 Laura Abbott - Reenable debugging options. * Mon Feb 18 2019 Laura Abbott - 5.0.0-0.rc7.git0.1 - Linux v5.0-rc7 - Disable debugging options. * Wed Feb 13 2019 Laura Abbott - 5.0.0-0.rc6.git1.1 - Linux v5.0-rc6-42-g1f947a7a011f * Wed Feb 13 2019 Laura Abbott - Reenable debugging options. * Wed Feb 13 2019 Laura Abbott - Reenable debugging options. * Wed Feb 13 2019 Peter Robinson - Enable NXP Freescale Layerscape platform * Mon Feb 11 2019 Laura Abbott - 5.0.0-0.rc6.git0.1 - Linux v5.0-rc6 - Disable debugging options. - Tweaks to gcc9 fixes * Mon Feb 04 2019 Laura Abbott - 5.0.0-0.rc5.git0.1 - Linux v5.0-rc5 - Disable debugging options. * Fri Feb 01 2019 Laura Abbott - 5.0.0-0.rc4.git3.1 - Linux v5.0-rc4-106-g5b4746a03199 * Thu Jan 31 2019 Hans de Goede - Add patches from -next to enable i915.fastboot by default on Skylake+ for https://fedoraproject.org/wiki/Changes/FlickerFreeBoot * Wed Jan 30 2019 Laura Abbott - 5.0.0-0.rc4.git2.1 - Linux v5.0-rc4-59-g62967898789d * Tue Jan 29 2019 Laura Abbott - 5.0.0-0.rc4.git1.1 - Linux v5.0-rc4-1-g4aa9fc2a435a * Tue Jan 29 2019 Laura Abbott - Reenable debugging options. * Mon Jan 28 2019 Laura Abbott - 5.0.0-0.rc4.git0.1 - Linux v5.0-rc4 - Disable debugging options. * Wed Jan 23 2019 Laura Abbott - 5.0.0-0.rc3.git1.1 - Linux v5.0-rc3-53-g333478a7eb21 * Wed Jan 23 2019 Laura Abbott - Reenable debugging options. * Mon Jan 21 2019 Laura Abbott - 5.0.0-0.rc3.git0.1 - Linux v5.0-rc3 - Disable debugging options. * Fri Jan 18 2019 Laura Abbott - 5.0.0-0.rc2.git4.1 - Linux v5.0-rc2-211-gd7393226d15a * Thu Jan 17 2019 Laura Abbott - 5.0.0-0.rc2.git3.1 - Linux v5.0-rc2-145-g7fbfee7c80de * Wed Jan 16 2019 Laura Abbott - 5.0.0-0.rc2.git2.1 - Linux v5.0-rc2-141-g47bfa6d9dc8c * Tue Jan 15 2019 Laura Abbott - 5.0.0-0.rc2.git1.1 - Linux v5.0-rc2-36-gfe76fc6aaf53 * Tue Jan 15 2019 Laura Abbott - Reenable debugging options. * Mon Jan 14 2019 Laura Abbott - Enable CONFIG_GPIO_LEDS and CONFIG_GPIO_PCA953X (rhbz 1601623) * Mon Jan 14 2019 Laura Abbott - 5.0.0-0.rc2.git0.1 - Linux v5.0-rc2 * Mon Jan 14 2019 Laura Abbott - Disable debugging options. * Sun Jan 13 2019 Peter Robinson - Raspberry Pi updates - Update AllWinner A64 timer errata workaround * Fri Jan 11 2019 Laura Abbott - 5.0.0-0.rc1.git4.1 - Linux v5.0-rc1-43-g1bdbe2274920 * Thu Jan 10 2019 Laura Abbott - 5.0.0-0.rc1.git3.1 - Linux v5.0-rc1-26-g70c25259537c * Wed Jan 09 2019 Laura Abbott - 5.0.0-0.rc1.git2.1 - Linux v5.0-rc1-24-g4064e47c8281 * Wed Jan 09 2019 Justin M. Forbes - Fix CVE-2019-3701 (rhbz 1663729 1663730) * Tue Jan 08 2019 Laura Abbott - 5.0.0-0.rc1.git1.1 - Linux v5.0-rc1-2-g7b5585136713 * Tue Jan 08 2019 Laura Abbott - Reenable debugging options. * Mon Jan 07 2019 Justin M. Forbes - Updates for secure boot * Mon Jan 07 2019 Laura Abbott - 5.0.0-0.rc1.git0.1 - Linux v5.0-rc1 * Mon Jan 07 2019 Laura Abbott - Disable debugging options. * Fri Jan 04 2019 Laura Abbott - 4.21.0-0.rc0.git7.1 - Linux v4.20-10979-g96d4f267e40f * Fri Jan 4 2019 Peter Robinson - Updates for Arm plaforms - IoT related updates * Thu Jan 03 2019 Laura Abbott - 4.21.0-0.rc0.git6.1 - Linux v4.20-10911-g645ff1e8e704 * Wed Jan 02 2019 Laura Abbott - 4.21.0-0.rc0.git5.1 - Linux v4.20-10595-g8e143b90e4d4 * Mon Dec 31 2018 Laura Abbott - 4.21.0-0.rc0.git4.1 - Linux v4.20-9221-gf12e840c819b * Sun Dec 30 2018 Laura Abbott - 4.21.0-0.rc0.git3.1 - Linux v4.20-9163-g195303136f19 * Fri Dec 28 2018 Laura Abbott - Enable CONFIG_BPF_LIRC_MODE2 (rhbz 1628151) - Enable CONFIG_NET_SCH_CAKE (rhbz 1655155) * Fri Dec 28 2018 Laura Abbott - 4.21.0-0.rc0.git2.1 - Linux v4.20-6428-g00c569b567c7 * Thu Dec 27 2018 Hans de Goede - Set CONFIG_REALTEK_PHY=y to workaround realtek ethernet issues (rhbz 1650984) * Wed Dec 26 2018 Laura Abbott - 4.21.0-0.rc0.git1.1 - Linux v4.20-3117-ga5f2bd479f58 * Wed Dec 26 2018 Laura Abbott - Reenable debugging options. * Mon Dec 24 2018 Justin M. Forbes - 4.20.0-1 - Linux v4.20.0 * Mon Dec 24 2018 Peter Robinson - Another fix for issue affecting Raspberry Pi 3-series WiFi (rhbz 1652093) * Fri Dec 21 2018 Justin M. Forbes - 4.20.0-0.rc7.git3.1 - Linux v4.20-rc7-214-g9097a058d49e * Thu Dec 20 2018 Justin M. Forbes - 4.20.0-0.rc7.git2.1 - Linux v4.20-rc7-202-g1d51b4b1d3f2 * Wed Dec 19 2018 Peter Robinson - Initial support for Raspberry Pi model 3A+ - Stability fixes for Raspberry Pi MMC (sdcard) driver * Tue Dec 18 2018 Justin M. Forbes - 4.20.0-0.rc7.git1.1 - Linux v4.20-rc7-6-gddfbab46539f - Reenable debugging options. * Mon Dec 17 2018 Justin M. Forbes - 4.20.0-0.rc7.git0.1 - Linux v4.20-rc7 * Mon Dec 17 2018 Justin M. Forbes - Disable debugging options. * Fri Dec 14 2018 Peter Robinson - Enhancements for Raspberrp Pi Camera * Thu Dec 13 2018 Justin M. Forbes - 4.20.0-0.rc6.git2.1 - Linux v4.20-rc6-82-g65e08c5e8631 * Wed Dec 12 2018 Justin M. Forbes - 4.20.0-0.rc6.git1.2 - Reenable debugging options. * Tue Dec 11 2018 Justin M. Forbes - 4.20.0-0.rc6.git1.1 - Linux v4.20-rc6-25-gf5d582777bcb * Tue Dec 11 2018 Hans de Goede - Really fix non functional hotkeys on Asus FX503VD (#1645070) * Mon Dec 10 2018 Justin M. Forbes - 4.20.0-0.rc6.git0.1 - Linux v4.20-rc6 * Mon Dec 10 2018 Justin M. Forbes - Disable debugging options. * Fri Dec 07 2018 Justin M. Forbes - 4.20.0-0.rc5.git3.1 - Linux v4.20-rc5-86-gb72f711a4efa * Wed Dec 05 2018 Justin M. Forbes - 4.20.0-0.rc5.git2.1 - Linux v4.20-rc5-44-gd08970904582 * Wed Dec 05 2018 Jeremy Cline - Fix corruption bug in direct dispatch for blk-mq * Tue Dec 04 2018 Justin M. Forbes - 4.20.0-0.rc5.git1.1 - Linux v4.20-rc5-21-g0072a0c14d5b - Reenable debugging options. * Mon Dec 03 2018 Justin M. Forbes - 4.20.0-0.rc5.git0.1 - Linux v4.20-rc5 * Mon Dec 03 2018 Justin M. Forbes - Disable debugging options. * Mon Dec 3 2018 Hans de Goede - Fix non functional hotkeys on Asus FX503VD (#1645070) * Fri Nov 30 2018 Justin M. Forbes - 4.20.0-0.rc4.git2.1 - Linux v4.20-rc4-156-g94f371cb7394 * Wed Nov 28 2018 Justin M. Forbes - 4.20.0-0.rc4.git1.1 - Linux v4.20-rc4-35-g121b018f8c74 - Reenable debugging options. * Mon Nov 26 2018 Justin M. Forbes - 4.20.0-0.rc4.git0.1 - Linux v4.20-rc4 - Disable debugging options. * Tue Nov 20 2018 Jeremy Cline - 4.20.0-0.rc3.git1.1 - Linux v4.20-rc3-83-g06e68fed3282 * Tue Nov 20 2018 Jeremy Cline - Reenable debugging options. * Tue Nov 20 2018 Hans de Goede - Turn on CONFIG_PINCTRL_GEMINILAKE on x86_64 (rhbz#1639155) - Add a patch fixing touchscreens on HP AMD based laptops (rhbz#1644013) - Add a patch fixing KIOX010A accelerometers (rhbz#1526312) * Mon Nov 19 2018 Jeremy Cline - 4.20.0-0.rc3.git0.1 - Linux v4.20-rc3 * Mon Nov 19 2018 Jeremy Cline - Disable debugging options. * Sat Nov 17 2018 Peter Robinson - Fix WiFi on Raspberry Pi 3 on aarch64 (rhbz 1649344) - Fixes for Raspberry Pi hwmon driver and firmware interface * Fri Nov 16 2018 Hans de Goede - Enable a few modules needed for accelerometer and other sensor support on some HP X2 2-in-1s * Thu Nov 15 2018 Justin M. Forbes - 4.20.0-0.rc2.git2.1 - Linux v4.20-rc2-52-g5929a1f0ff30 * Wed Nov 14 2018 Justin M. Forbes - 4.20.0-0.rc2.git1.1 - Linux v4.20-rc2-37-g3472f66013d1 - Reenable debugging options. * Mon Nov 12 2018 Peter Robinson - Further updates for ARM - More Qualcomm SD845 enablement - FPGA Device Feature List (DFL) support - Minor cleanups * Sun Nov 11 2018 Justin M. Forbes - 4.20.0-0.rc2.git0.1 - Linux v4.20-rc2 - Disable debugging options. * Fri Nov 09 2018 Justin M. Forbes - 4.20.0-0.rc1.git4.1 - Linux v4.20-rc1-145-gaa4330e15c26 * Thu Nov 8 2018 Peter Robinson - Initial Qualcomm SD845 enablement * Thu Nov 08 2018 Justin M. Forbes - 4.20.0-0.rc1.git3.1 - Linux v4.20-rc1-98-gb00d209241ff * Wed Nov 07 2018 Justin M. Forbes - 4.20.0-0.rc1.git2.1 - Linux v4.20-rc1-87-g85758777c2a2 * Wed Nov 7 2018 Peter Robinson - Initial Arm config updates for 4.20 * Tue Nov 06 2018 Justin M. Forbes - 4.20.0-0.rc1.git1.1 - Linux v4.20-rc1-62-g8053e5b93eca - Reenable debugging options. * Mon Nov 05 2018 Justin M. Forbes - 4.20.0-0.rc1.git0.1 - Linux v4.20-rc1 * Mon Nov 05 2018 Justin M. Forbes - Disable debugging options. * Fri Nov 02 2018 Justin M. Forbes - 4.20.0-0.rc0.git9.1 - Linux v4.19-12532-g8adcc59974b8 * Thu Nov 01 2018 Justin M. Forbes - 4.20.0-0.rc0.git8.1 - Linux v4.19-12279-g5b7449810ae6 * Wed Oct 31 2018 Justin M. Forbes - 4.20.0-0.rc0.git7.1 - Linux v4.19-11807-g310c7585e830 * Tue Oct 30 2018 Justin M. Forbes - 4.20.0-0.rc0.git6.1 - Linux v4.19-11706-g11743c56785c * Mon Oct 29 2018 Justin M. Forbes - 4.20.0-0.rc0.git5.1 - Linux v4.19-9448-g673c790e7282 * Fri Oct 26 2018 Justin M. Forbes - 4.20.0-0.rc0.git4.1 - Linux v4.19-6148-ge5f6d9afa341 * Thu Oct 25 2018 Justin M. Forbes - 4.20.0-0.rc0.git3.1 - Linux v4.19-5646-g3acbd2de6bc3 * Wed Oct 24 2018 Justin M. Forbes - 4.20.0-0.rc0.git2.1 - Linux v4.19-4345-g638820d8da8e * Tue Oct 23 2018 Justin M. Forbes - 4.20.0-0.rc0.git1.1 - Linux v4.19-1676-g0d1b82cd8ac2 - Reenable debugging options. * Mon Oct 22 2018 Jeremy Cline - 4.19.0-1 - Linux v4.19 - Disable debugging options. * Sat Oct 20 2018 Peter Robinson - Fix network on some i.MX6 devices (rhbz 1628209) * Fri Oct 19 2018 Jeremy Cline - 4.19.0-0.rc8.git4.1 - Linux v4.19-rc8-95-g91b15613ce7f - Enable pinctrl-cannonlake (rhbz 1641057) * Thu Oct 18 2018 Jeremy Cline - 4.19.0-0.rc8.git3.1 - Linux v4.19-rc8-27-gfa520c47eaa1 * Wed Oct 17 2018 Jeremy Cline - 4.19.0-0.rc8.git2.1 - Linux v4.19-rc8-16-gc343db455eb3 * Tue Oct 16 2018 Peter Robinson - Fixes to Rock960 series of devices, improves stability considerably - Raspberry Pi graphics fix * Tue Oct 16 2018 Jeremy Cline - 4.19.0-0.rc8.git1.1 - Linux v4.19-rc8-11-gb955a910d7fd - Re-enable debugging options. * Mon Oct 15 2018 Jeremy Cline - 4.19.0-0.rc8.git0.1 - Linux v4.19-rc8 * Mon Oct 15 2018 Jeremy Cline - Disable debugging options. * Fri Oct 12 2018 Peter Robinson - Rebase device specific NVRAM files on brcm WiFi devices to latest * Fri Oct 12 2018 Jeremy Cline - 4.19.0-0.rc7.git4.1 - Linux v4.19-rc7-139-g6b3944e42e2e * Thu Oct 11 2018 Jeremy Cline - 4.19.0-0.rc7.git3.1 - Linux v4.19-rc7-61-g9f203e2f2f06 * Wed Oct 10 2018 Jeremy Cline - 4.19.0-0.rc7.git2.1 - Linux v4.19-rc7-33-gbb2d8f2f6104 * Tue Oct 09 2018 Jeremy Cline - 4.19.0-0.rc7.git1.1 - Linux v4.19-rc7-15-g64c5e530ac2c - Re-enable debugging options. * Mon Oct 08 2018 Jeremy Cline - 4.19.0-0.rc7.git0.1 - Linux v4.19-rc7 * Mon Oct 08 2018 Jeremy Cline - Disable debugging options. * Fri Oct 05 2018 Jeremy Cline - 4.19.0-0.rc6.git4.1 - Linux v4.19-rc6-223-gbefad944e231 * Thu Oct 04 2018 Jeremy Cline - 4.19.0-0.rc6.git3.1 - Linux v4.19-rc6-177-gcec4de302c5f * Wed Oct 03 2018 Jeremy Cline - 4.19.0-0.rc6.git2.1 - Linux v4.19-rc6-37-g6bebe37927f3 * Tue Oct 02 2018 Jeremy Cline - 4.19.0-0.rc6.git1.1 - Linux v4.19-rc6-29-g1d2ba7fee28b - Re-enable debugging options. * Mon Oct 01 2018 Laura Abbott - Disable CONFIG_CRYPTO_DEV_SP_PSP (rhbz 1608242) * Mon Oct 01 2018 Jeremy Cline - 4.19.0-0.rc6.git0.1 - Linux v4.19-rc6 * Mon Oct 01 2018 Jeremy Cline - Disable debugging options. * Mon Oct 1 2018 Peter Robinson - Support loading device specific NVRAM files on brcm WiFi devices * Fri Sep 28 2018 Jeremy Cline - 4.19.0-0.rc5.git3.1 - Linux v4.19-rc5-159-gad0371482b1e * Wed Sep 26 2018 Peter Robinson - Add thermal trip to bcm283x (Raspberry Pi) cpufreq - Add initial RockPro64 DT support * Wed Sep 26 2018 Jeremy Cline - 4.19.0-0.rc5.git2.1 - Linux v4.19-rc5-143-gc307aaf3eb47 * Tue Sep 25 2018 Jeremy Cline - 4.19.0-0.rc5.git1.1 - Linux v4.19-rc5-99-g8c0f9f5b309d - Re-enable debugging options. * Mon Sep 24 2018 Jeremy Cline - 4.19.0-0.rc5.git0.1 - Linux v4.19-rc5 * Mon Sep 24 2018 Jeremy Cline - Disable debugging options. * Fri Sep 21 2018 Jeremy Cline - 4.19.0-0.rc4.git4.1 - Linux v4.19-rc4-176-g211b100a5ced * Thu Sep 20 2018 Jeremy Cline - 4.19.0-0.rc4.git3.1 - Linux v4.19-rc4-137-gae596de1a0c8 * Wed Sep 19 2018 Jeremy Cline - 4.19.0-0.rc4.git2.1 - Linux v4.19-rc4-86-g4ca719a338d5 * Tue Sep 18 2018 Jeremy Cline - 4.19.0-0.rc4.git1.1 - Linux v4.19-rc4-78-g5211da9ca526 - Enable debugging options. * Mon Sep 17 2018 Jeremy Cline - 4.19.0-0.rc4.git0.1 - Linux v4.19-rc4 * Mon Sep 17 2018 Jeremy Cline - Stop including the i686-PAE config in the sources - Disable debugging options. * Fri Sep 14 2018 Jeremy Cline - 4.19.0-0.rc3.git3.1 - Linux v4.19-rc3-247-gf3c0b8ce4840 * Thu Sep 13 2018 Jeremy Cline - 4.19.0-0.rc3.git2.1 - Linux v4.19-rc3-130-g54eda9df17f3 * Thu Sep 13 2018 Hans de Goede - Add patch silencing "EFI stub: UEFI Secure Boot is enabled." at boot * Wed Sep 12 2018 Jeremy Cline - 4.19.0-0.rc3.git1.1 - Linux v4.19-rc3-21-g5e335542de83 - Re-enable debugging options. * Mon Sep 10 2018 Jeremy Cline - 4.19.0-0.rc3.git0.1 - Linux v4.19-rc3 * Mon Sep 10 2018 Jeremy Cline - Disable debugging options. * Fri Sep 07 2018 Jeremy Cline - 4.19.0-0.rc2.git3.1 - Linux v4.19-rc2-205-ga49a9dcce802 * Thu Sep 06 2018 Jeremy Cline - 4.19.0-0.rc2.git2.1 - Linux v4.19-rc2-163-gb36fdc6853a3 * Wed Sep 05 2018 Jeremy Cline - 4.19.0-0.rc2.git1.1 - Linux v4.19-rc2-107-g28619527b8a7 - Re-enable debugging options * Mon Sep 3 2018 Peter Robinson - Enable bcm283x VCHIQ, camera and analog audio drivers - ARM config updates for 4.19 * Mon Sep 03 2018 Jeremy Cline - 4.19.0-0.rc2.git0.1 - Linux v4.19-rc2 * Mon Sep 03 2018 Jeremy Cline - Disable debugging options. * Fri Aug 31 2018 Jeremy Cline - 4.19.0-0.rc1.git4.1 - Linux v4.19-rc1-195-g4658aff6eeaa * Thu Aug 30 2018 Jeremy Cline - 4.19.0-0.rc1.git3.1 - Linux v4.19-rc1-124-g58c3f14f86c9 * Wed Aug 29 2018 Jeremy Cline - Enable the AFS module (rhbz 1616016) * Wed Aug 29 2018 Jeremy Cline - 4.19.0-0.rc1.git2.1 - Linux v4.19-rc1-95-g3f16503b7d22 * Tue Aug 28 2018 Jeremy Cline - 4.19.0-0.rc1.git1.1 - Linux v4.19-rc1-88-g050cdc6c9501 - Re-enable debugging options * Mon Aug 27 2018 Jeremy Cline - 4.19.0-0.rc1.git0.1 - Linux v4.19-rc1 * Mon Aug 27 2018 Jeremy Cline - Disable debugging options. * Sat Aug 25 2018 Jeremy Cline - 4.19.0-0.rc0.git12.1 - Linux v4.18-12872-g051935978432 * Fri Aug 24 2018 Jeremy Cline - 4.19.0-0.rc0.git11.1 - Linux v4.18-12721-g33e17876ea4e * Thu Aug 23 2018 Jeremy Cline - 4.19.0-0.rc0.git10.1 - Linux v4.18-11682-g815f0ddb346c * Wed Aug 22 2018 Jeremy Cline - 4.19.0-0.rc0.git9.1 - Linux v4.18-11219-gad1d69735878 * Tue Aug 21 2018 Jeremy Cline - 4.19.0-0.rc0.git8.1 - Linux v4.18-10986-g778a33959a8a * Mon Aug 20 2018 Jeremy Cline - 4.19.0-0.rc0.git7.1 - Linux v4.18-10721-g2ad0d5269970 * Sun Aug 19 2018 Jeremy Cline - 4.19.0-0.rc0.git6.1 - Linux v4.18-10568-g08b5fa819970 * Sat Aug 18 2018 Jeremy Cline - 4.19.0-0.rc0.git5.1 - Linux v4.18-8895-g1f7a4c73a739 * Fri Aug 17 2018 Laura Abbott - Enable CONFIG_AF_KCM (rhbz 1613819) * Fri Aug 17 2018 Jeremy Cline - 4.19.0-0.rc0.git4.1 - Linux v4.18-8108-g5c60a7389d79 - Re-enable AEGIS and MORUS ciphers (rhbz 1610180) * Thu Aug 16 2018 Jeremy Cline - 4.19.0-0.rc0.git3.1 - Linux v4.18-7873-gf91e654474d4 * Wed Aug 15 2018 Peter Robinson - Drop PPC64 (Big Endian) configs * Wed Aug 15 2018 Laura Abbott - 4.19.0-0.rc0.git2.1 - Linux v4.18-2978-g1eb46908b35d * Tue Aug 14 2018 Jeremy Cline - 4.19.0-0.rc0.git1.1 - Reenable debugging options. - Linux v4.18-1283-g10f3e23f07cb * Mon Aug 13 2018 Laura Abbott - 4.18.0-1 - Linux v4.18 - Disable debugging options.