# All Global changes to build and install go here. # Per the below section about __spec_install_pre, any rpm # environment changes that affect %%install need to go # here before the %%install macro is pre-built. # Disable LTO in userspace packages. %global _lto_cflags %{nil} # Option to enable compiling with clang instead of gcc. %bcond_with toolchain_clang %if %{with toolchain_clang} %global toolchain clang %endif # Compile the kernel with LTO (only supported when building with clang). %bcond_with clang_lto %if %{with clang_lto} && %{without toolchain_clang} {error:clang_lto requires --with toolchain_clang} %endif # Cross compile on copr for arm # See https://bugzilla.redhat.com/1879599 %if 0%{?_with_cross_arm:1} %global _target_cpu armv7hl %global _arch arm %global _build_arch arm %global _with_cross 1 %endif # The kernel's %%install section is special # Normally the %%install section starts by cleaning up the BUILD_ROOT # like so: # # %%__spec_install_pre %%{___build_pre}\ # [ "$RPM_BUILD_ROOT" != "/" ] && rm -rf "${RPM_BUILD_ROOT}"\ # mkdir -p `dirname "$RPM_BUILD_ROOT"`\ # mkdir "$RPM_BUILD_ROOT"\ # %%{nil} # # But because of kernel variants, the %%build section, specifically # BuildKernel(), moves each variant to its final destination as the # variant is built. This violates the expectation of the %%install # section. As a result we snapshot the current env variables and # purposely leave out the removal section. All global wide changes # should be added above this line otherwise the %%install section # will not see them. %global __spec_install_pre %{___build_pre} # At the time of this writing (2019-03), RHEL8 packages use w2.xzdio # compression for rpms (xz, level 2). # Kernel has several large (hundreds of mbytes) rpms, they take ~5 mins # to compress by single-threaded xz. Switch to threaded compression, # and from level 2 to 3 to keep compressed sizes close to "w2" results. # # NB: if default compression in /usr/lib/rpm/redhat/macros ever changes, # this one might need tweaking (e.g. if default changes to w3.xzdio, # change below to w4T.xzdio): # # This is disabled on i686 as it triggers oom errors %ifnarch i686 %define _binary_payload w3T.xzdio %endif Summary: The Linux kernel # Set released_kernel to 1 when the upstream source tarball contains a # kernel release. (This includes prepatch or "rc" releases.) # Set released_kernel to 0 when the upstream source tarball contains an # unreleased kernel development snapshot. %global released_kernel 0 # Set debugbuildsenabled to 1 to build separate base and debug kernels # (on supported architectures). The kernel-debug-* subpackages will # contain the debug kernel. # Set debugbuildsenabled to 0 to not build a separate debug kernel, but # to build the base kernel using the debug configuration. (Specifying # the --with-release option overrides this setting.) %define debugbuildsenabled 0 %global distro_build 0.rc2.20210923git58e2cf5d7946.21 %if 0%{?fedora} %define secure_boot_arch x86_64 %else %define secure_boot_arch x86_64 aarch64 s390x ppc64le %endif # Signing for secure boot authentication %ifarch %{secure_boot_arch} %global signkernel 1 %else %global signkernel 0 %endif # Sign modules on all arches %global signmodules 1 # Compress modules only for architectures that build modules %ifarch noarch %global zipmodules 0 %else %global zipmodules 1 %endif %if %{zipmodules} %global zipsed -e 's/\.ko$/\.ko.xz/' # for parallel xz processes, replace with 1 to go back to single process %global zcpu `nproc --all` %endif # define buildid .local %if 0%{?fedora} %define primary_target fedora %else %define primary_target rhel %endif # The kernel tarball/base version %define kversion 5.15 %define rpmversion 5.15.0 %define patchversion 5.15 %define pkgrelease 0.rc2.20210923git58e2cf5d7946.21 # This is needed to do merge window version magic %define patchlevel 15 # allow pkg_release to have configurable %%{?dist} tag %define specrelease 0.rc2.20210923git58e2cf5d7946.21%{?buildid}%{?dist} %define pkg_release %{specrelease} # libexec dir is not used by the linker, so the shared object there # should not be exported to RPM provides %global __provides_exclude_from ^%{_libexecdir}/kselftests # The following build options are enabled by default, but may become disabled # by later architecture-specific checks. These can also be disabled by using # --without in the rpmbuild command, or by forcing these values to 0. # # standard kernel %define with_up %{?_without_up: 0} %{?!_without_up: 1} # kernel PAE (only valid for ARM (lpae)) %define with_pae %{?_without_pae: 0} %{?!_without_pae: 1} # kernel-debug %define with_debug %{?_without_debug: 0} %{?!_without_debug: 1} # kernel-zfcpdump (s390 specific kernel for zfcpdump) %define with_zfcpdump %{?_without_zfcpdump: 0} %{?!_without_zfcpdump: 1} # kernel-doc %define with_doc %{?_without_doc: 0} %{?!_without_doc: 1} # kernel-headers %define with_headers %{?_without_headers: 0} %{?!_without_headers: 1} %define with_cross_headers %{?_without_cross_headers: 0} %{?!_without_cross_headers: 1} # perf %define with_perf %{?_without_perf: 0} %{?!_without_perf: 1} # tools %define with_tools %{?_without_tools: 0} %{?!_without_tools: 1} # bpf tool %define with_bpftool %{?_without_bpftool: 0} %{?!_without_bpftool: 1} # kernel-debuginfo %define with_debuginfo %{?_without_debuginfo: 0} %{?!_without_debuginfo: 1} # kernel-abi-stablelists %define with_kernel_abi_stablelists %{?_without_kernel_abi_stablelists: 0} %{?!_without_kernel_abi_stablelists: 1} # internal samples and selftests %define with_selftests %{?_without_selftests: 0} %{?!_without_selftests: 1} # # Additional options for user-friendly one-off kernel building: # # Only build the base kernel (--with baseonly): %define with_baseonly %{?_with_baseonly: 1} %{?!_with_baseonly: 0} # Only build the pae kernel (--with paeonly): %define with_paeonly %{?_with_paeonly: 1} %{?!_with_paeonly: 0} # Only build the debug kernel (--with dbgonly): %define with_dbgonly %{?_with_dbgonly: 1} %{?!_with_dbgonly: 0} # Control whether we perform a compat. check against published ABI. %define with_kabichk %{?_without_kabichk: 0} %{?!_without_kabichk: 1} # Temporarily disable kabi checks until RC. %define with_kabichk 0 # Control whether we perform a compat. check against DUP ABI. %define with_kabidupchk %{?_with_kabidupchk: 1} %{?!_with_kabidupchk: 0} # # Control whether to run an extensive DWARF based kABI check. # Note that this option needs to have baseline setup in SOURCE300. %define with_kabidwchk %{?_without_kabidwchk: 0} %{?!_without_kabidwchk: 1} %define with_kabidw_base %{?_with_kabidw_base: 1} %{?!_with_kabidw_base: 0} # # Control whether to install the vdso directories. %define with_vdso_install %{?_without_vdso_install: 0} %{?!_without_vdso_install: 1} # # should we do C=1 builds with sparse %define with_sparse %{?_with_sparse: 1} %{?!_with_sparse: 0} # # Cross compile requested? %define with_cross %{?_with_cross: 1} %{?!_with_cross: 0} # # build a release kernel on rawhide %define with_release %{?_with_release: 1} %{?!_with_release: 0} # verbose build, i.e. no silent rules and V=1 %define with_verbose %{?_with_verbose: 1} %{?!_with_verbose: 0} # # check for mismatched config options %define with_configchecks %{?_without_configchecks: 0} %{?!_without_configchecks: 1} # # gcov support %define with_gcov %{?_with_gcov:1}%{?!_with_gcov:0} # # ipa_clone support %define with_ipaclones %{?_without_ipaclones: 0} %{?!_without_ipaclones: 1} # Want to build a vanilla kernel build without any non-upstream patches? %define with_vanilla %{?_with_vanilla: 1} %{?!_with_vanilla: 0} %if 0%{?fedora} # Kernel headers are being split out into a separate package %define with_headers 0 %define with_cross_headers 0 # no ipa_clone for now %define with_ipaclones 0 # no stablelist %define with_kernel_abi_stablelists 0 # Fedora builds these separately %define with_perf 0 %define with_tools 0 %define with_bpftool 0 # selftests turns on bpftool %define with_selftests 0 %endif %if %{with_verbose} %define make_opts V=1 %else %define make_opts -s %endif %if %{with toolchain_clang} %global clang_make_opts HOSTCC=clang CC=clang %if %{with clang_lto} %global clang_make_opts %{clang_make_opts} LD=ld.lld HOSTLD=ld.lld AR=llvm-ar NM=llvm-nm HOSTAR=llvm-ar HOSTNM=llvm-nm LLVM_IAS=1 %endif %global make_opts %{make_opts} %{clang_make_opts} # clang does not support the -fdump-ipa-clones option %global with_ipaclones 0 %endif # turn off debug kernel and kabichk for gcov builds %if %{with_gcov} %define with_debug 0 %define with_kabichk 0 %define with_kabidupchk 0 %define with_kabidwchk 0 %define with_kabidw_base 0 %define with_kernel_abi_stablelists 0 %endif # turn off kABI DWARF-based check if we're generating the base dataset %if %{with_kabidw_base} %define with_kabidwchk 0 %endif # kpatch_kcflags are extra compiler flags applied to base kernel # -fdump-ipa-clones is enabled only for base kernels on selected arches %if %{with_ipaclones} %ifarch x86_64 ppc64le %define kpatch_kcflags -fdump-ipa-clones %else %define with_ipaclones 0 %endif %endif %define make_target bzImage %define image_install_path boot %define KVERREL %{version}-%{release}.%{_target_cpu} %define KVERREL_RE %(echo %KVERREL | sed 's/+/[+]/g') %define hdrarch %_target_cpu %define asmarch %_target_cpu %if 0%{!?nopatches:1} %define nopatches 0 %endif %if %{with_vanilla} %define nopatches 1 %endif %if %{with_release} %define debugbuildsenabled 1 %endif %if !%{with_debuginfo} %define _enable_debug_packages 0 %endif %define debuginfodir /usr/lib/debug # Needed because we override almost everything involving build-ids # and debuginfo generation. Currently we rely on the old alldebug setting. %global _build_id_links alldebug # kernel PAE is only built on ARMv7 %ifnarch armv7hl %define with_pae 0 %endif # if requested, only build base kernel %if %{with_baseonly} %define with_pae 0 %define with_debug 0 %define with_vdso_install 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_kernel_abi_stablelists 0 %define with_selftests 0 %define with_cross 0 %define with_cross_headers 0 %define with_ipaclones 0 %endif # if requested, only build pae kernel %if %{with_paeonly} %define with_up 0 %define with_debug 0 %endif # if requested, only build debug kernel %if %{with_dbgonly} %define with_up 0 %define with_vdso_install 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_kernel_abi_stablelists 0 %define with_selftests 0 %define with_cross 0 %define with_cross_headers 0 %define with_ipaclones 0 %endif # turn off kABI DUP check and DWARF-based check if kABI check is disabled %if !%{with_kabichk} %define with_kabidupchk 0 %define with_kabidwchk 0 %endif %if %{with_vdso_install} %define use_vdso 1 %endif # selftests require bpftool to be built %if %{with_selftests} %define with_bpftool 1 %endif %ifnarch noarch %define with_kernel_abi_stablelists 0 %endif # Overrides for generic default options # only package docs noarch %ifnarch noarch %define with_doc 0 %define doc_build_fail true %endif %if 0%{?fedora} # don't do debug builds on anything but i686 and x86_64 %ifnarch i686 x86_64 %define with_debug 0 %endif %endif # don't build noarch kernels or headers (duh) %ifarch noarch %define with_up 0 %define with_headers 0 %define with_cross_headers 0 %define with_tools 0 %define with_perf 0 %define with_bpftool 0 %define with_selftests 0 %define with_debug 0 %define all_arch_configs kernel-%{version}-*.config %endif # sparse blows up on ppc %ifnarch ppc64le %define with_sparse 0 %endif # zfcpdump mechanism is s390 only %ifnarch s390x %define with_zfcpdump 0 %endif %if 0%{?fedora} # This is not for Fedora %define with_zfcpdump 0 %endif # Per-arch tweaks %ifarch i686 %define asmarch x86 %define hdrarch i386 %define all_arch_configs kernel-%{version}-i?86*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch x86_64 %define asmarch x86 %define all_arch_configs kernel-%{version}-x86_64*.config %define kernel_image arch/x86/boot/bzImage %endif %ifarch ppc64le %define asmarch powerpc %define hdrarch powerpc %define make_target vmlinux %define kernel_image vmlinux %define kernel_image_elf 1 %define use_vdso 0 %define all_arch_configs kernel-%{version}-ppc64le*.config %endif %ifarch s390x %define asmarch s390 %define hdrarch s390 %define all_arch_configs kernel-%{version}-s390x.config %define kernel_image arch/s390/boot/bzImage %define vmlinux_decompressor arch/s390/boot/compressed/vmlinux %endif %ifarch %{arm} %define all_arch_configs kernel-%{version}-arm*.config %define skip_nonpae_vdso 1 %define asmarch arm %define hdrarch arm %define make_target bzImage %define kernel_image arch/arm/boot/zImage # http://lists.infradead.org/pipermail/linux-arm-kernel/2012-March/091404.html %define kernel_mflags KALLSYMS_EXTRA_PASS=1 # we only build headers/perf/tools on the base arm arches # just like we used to only build them on i386 for x86 %ifnarch armv7hl %define with_headers 0 %define with_cross_headers 0 %endif # These currently don't compile on armv7 %define with_selftests 0 %endif %ifarch aarch64 %define all_arch_configs kernel-%{version}-aarch64*.config %define asmarch arm64 %define hdrarch arm64 %define make_target Image.gz %define kernel_image arch/arm64/boot/Image.gz %endif # Should make listnewconfig fail if there's config options # printed out? %if %{nopatches} %define with_configchecks 0 %endif # To temporarily exclude an architecture from being built, add it to # %%nobuildarches. Do _NOT_ use the ExclusiveArch: line, because if we # don't build kernel-headers then the new build system will no longer let # us use the previous build of that package -- it'll just be completely AWOL. # Which is a BadThing(tm). # We only build kernel-headers on the following... %if 0%{?fedora} %define nobuildarches i386 %else %define nobuildarches i386 i686 %{arm} %endif %ifarch %nobuildarches # disable BuildKernel commands %define with_up 0 %define with_debug 0 %define with_pae 0 %define with_zfcpdump 0 %define with_debuginfo 0 %define with_perf 0 %define with_tools 0 %define with_bpftool 0 %define with_selftests 0 %define _enable_debug_packages 0 %endif # Architectures we build tools/cpupower on %if 0%{?fedora} %define cpupowerarchs %{ix86} x86_64 ppc64le %{arm} aarch64 %else %define cpupowerarchs i686 x86_64 ppc64le aarch64 %endif %if 0%{?use_vdso} %if 0%{?skip_nonpae_vdso} %define _use_vdso 0 %else %define _use_vdso 1 %endif %else %define _use_vdso 0 %endif # If build of debug packages is disabled, we need to know if we want to create # meta debug packages or not, after we define with_debug for all specific cases # above. So this must be at the end here, after all cases of with_debug or not. %define with_debug_meta 0 %if !%{debugbuildsenabled} %if %{with_debug} %define with_debug_meta 1 %endif %define with_debug 0 %endif # # Packages that need to be installed before the kernel is, because the %%post # scripts use them. # %define kernel_prereq coreutils, systemd >= 203-2, /usr/bin/kernel-install %define initrd_prereq dracut >= 027 Name: kernel License: GPLv2 and Redistributable, no modification permitted URL: https://www.kernel.org/ Version: %{rpmversion} Release: %{pkg_release} # DO NOT CHANGE THE 'ExclusiveArch' LINE TO TEMPORARILY EXCLUDE AN ARCHITECTURE BUILD. # SET %%nobuildarches (ABOVE) INSTEAD %if 0%{?fedora} ExclusiveArch: noarch x86_64 s390x %{arm} aarch64 ppc64le %else ExclusiveArch: noarch i386 i686 x86_64 s390x %{arm} aarch64 ppc64le %endif ExclusiveOS: Linux %ifnarch %{nobuildarches} Requires: kernel-core-uname-r = %{KVERREL} Requires: kernel-modules-uname-r = %{KVERREL} %endif # # List the packages used during the kernel build # BuildRequires: kmod, patch, bash, coreutils, tar, git-core, which BuildRequires: bzip2, xz, findutils, gzip, m4, perl-interpreter, perl-Carp, perl-devel, perl-generators, make, diffutils, gawk BuildRequires: gcc, binutils, redhat-rpm-config, hmaccalc, bison, flex, gcc-c++ BuildRequires: net-tools, hostname, bc, elfutils-devel BuildRequires: dwarves BuildRequires: python3-devel BuildRequires: gcc-plugin-devel %ifnarch %{nobuildarches} noarch BuildRequires: bpftool %endif %if %{with_headers} BuildRequires: rsync %endif %if %{with_doc} BuildRequires: xmlto, asciidoc, python3-sphinx, python3-sphinx_rtd_theme %endif %if %{with_sparse} BuildRequires: sparse %endif %if %{with_perf} BuildRequires: zlib-devel binutils-devel newt-devel perl(ExtUtils::Embed) bison flex xz-devel BuildRequires: audit-libs-devel BuildRequires: java-devel BuildRequires: libbpf-devel BuildRequires: libbabeltrace-devel BuildRequires: libtraceevent-devel %ifnarch %{arm} s390x BuildRequires: numactl-devel %endif %ifarch aarch64 BuildRequires: opencsd-devel >= 1.0.0 %endif %endif %if %{with_tools} BuildRequires: gettext ncurses-devel BuildRequires: libcap-devel libcap-ng-devel %ifnarch s390x BuildRequires: pciutils-devel %endif %endif %if %{with_bpftool} BuildRequires: python3-docutils BuildRequires: zlib-devel binutils-devel %endif %if %{with_selftests} BuildRequires: clang llvm %ifnarch %{arm} BuildRequires: numactl-devel %endif BuildRequires: libcap-devel libcap-ng-devel rsync libmnl-devel %endif BuildConflicts: rhbuildsys(DiskFree) < 500Mb %if %{with_debuginfo} BuildRequires: rpm-build, elfutils BuildConflicts: rpm < 4.13.0.1-19 BuildConflicts: dwarves < 1.13 # Most of these should be enabled after more investigation %undefine _include_minidebuginfo %undefine _find_debuginfo_dwz_opts %undefine _unique_build_ids %undefine _unique_debug_names %undefine _unique_debug_srcs %undefine _debugsource_packages %undefine _debuginfo_subpackages %global _find_debuginfo_opts -r %global _missing_build_ids_terminate_build 1 %global _no_recompute_build_ids 1 %endif %if %{with_kabidwchk} || %{with_kabidw_base} BuildRequires: kabi-dw %endif %if %{signkernel}%{signmodules} BuildRequires: openssl openssl-devel %if %{signkernel} %ifarch x86_64 aarch64 BuildRequires: nss-tools BuildRequires: pesign >= 0.10-4 %endif %endif %endif %if %{with_cross} BuildRequires: binutils-%{_build_arch}-linux-gnu, gcc-%{_build_arch}-linux-gnu %define cross_opts CROSS_COMPILE=%{_build_arch}-linux-gnu- %define __strip %{_build_arch}-linux-gnu-strip %endif # These below are required to build man pages %if %{with_perf} BuildRequires: xmlto %endif %if %{with_perf} || %{with_tools} BuildRequires: asciidoc %endif %if %{with toolchain_clang} BuildRequires: clang %endif %if %{with clang_lto} BuildRequires: llvm BuildRequires: lld %endif # Because this is the kernel, it's hard to get a single upstream URL # to represent the base without needing to do a bunch of patching. This # tarball is generated from a src-git tree. If you want to see the # exact git commit you can run # # xzcat -qq ${TARBALL} | git get-tar-commit-id Source0: linux-5.15-rc2-51-g58e2cf5d7946.tar.xz Source1: Makefile.rhelver # Name of the packaged file containing signing key %ifarch ppc64le %define signing_key_filename kernel-signing-ppc.cer %endif %ifarch s390x %define signing_key_filename kernel-signing-s390.cer %endif Source8: x509.genkey.rhel Source9: x509.genkey.fedora %if %{?released_kernel} Source10: redhatsecurebootca5.cer Source11: redhatsecurebootca1.cer Source12: redhatsecureboot501.cer Source13: redhatsecureboot301.cer Source14: secureboot_s390.cer Source15: secureboot_ppc.cer %define secureboot_ca_1 %{SOURCE10} %define secureboot_ca_0 %{SOURCE11} %ifarch x86_64 aarch64 %define secureboot_key_1 %{SOURCE12} %define pesign_name_1 redhatsecureboot501 %define secureboot_key_0 %{SOURCE13} %define pesign_name_0 redhatsecureboot301 %endif %ifarch s390x %define secureboot_key_0 %{SOURCE14} %define pesign_name_0 redhatsecureboot302 %endif %ifarch ppc64le %define secureboot_key_0 %{SOURCE15} %define pesign_name_0 redhatsecureboot303 %endif # released_kernel %else Source10: redhatsecurebootca4.cer Source11: redhatsecurebootca2.cer Source12: redhatsecureboot401.cer Source13: redhatsecureboot003.cer %define secureboot_ca_1 %{SOURCE10} %define secureboot_ca_0 %{SOURCE11} %define secureboot_key_1 %{SOURCE12} %define pesign_name_1 redhatsecureboot401 %define secureboot_key_0 %{SOURCE13} %define pesign_name_0 redhatsecureboot003 # released_kernel %endif Source22: mod-extra.list.rhel Source16: mod-extra.list.fedora Source17: mod-denylist.sh Source18: mod-sign.sh Source79: parallel_xz.sh Source80: filter-x86_64.sh.fedora Source81: filter-armv7hl.sh.fedora Source82: filter-i686.sh.fedora Source83: filter-aarch64.sh.fedora Source86: filter-ppc64le.sh.fedora Source87: filter-s390x.sh.fedora Source89: filter-modules.sh.fedora Source90: filter-x86_64.sh.rhel Source91: filter-armv7hl.sh.rhel Source92: filter-i686.sh.rhel Source93: filter-aarch64.sh.rhel Source96: filter-ppc64le.sh.rhel Source97: filter-s390x.sh.rhel Source99: filter-modules.sh.rhel %define modsign_cmd %{SOURCE18} Source20: kernel-aarch64-rhel.config Source21: kernel-aarch64-debug-rhel.config Source30: kernel-ppc64le-rhel.config Source31: kernel-ppc64le-debug-rhel.config Source32: kernel-s390x-rhel.config Source33: kernel-s390x-debug-rhel.config Source34: kernel-s390x-zfcpdump-rhel.config Source35: kernel-x86_64-rhel.config Source36: kernel-x86_64-debug-rhel.config Source37: kernel-aarch64-fedora.config Source38: kernel-aarch64-debug-fedora.config Source39: kernel-armv7hl-fedora.config Source40: kernel-armv7hl-debug-fedora.config Source41: kernel-armv7hl-lpae-fedora.config Source42: kernel-armv7hl-lpae-debug-fedora.config Source43: kernel-i686-fedora.config Source44: kernel-i686-debug-fedora.config Source45: kernel-ppc64le-fedora.config Source46: kernel-ppc64le-debug-fedora.config Source47: kernel-s390x-fedora.config Source48: kernel-s390x-debug-fedora.config Source49: kernel-x86_64-fedora.config Source50: kernel-x86_64-debug-fedora.config Source51: generate_all_configs.sh Source52: process_configs.sh Source56: update_scripts.sh Source57: generate_crashkernel_default.sh Source54: mod-internal.list Source100: rheldup3.x509 Source101: rhelkpatch1.x509 Source200: check-kabi Source201: Module.kabi_aarch64 Source202: Module.kabi_ppc64le Source203: Module.kabi_s390x Source204: Module.kabi_x86_64 Source210: Module.kabi_dup_aarch64 Source211: Module.kabi_dup_ppc64le Source212: Module.kabi_dup_s390x Source213: Module.kabi_dup_x86_64 Source300: kernel-abi-stablelists-%{rpmversion}-%{distro_build}.tar.bz2 Source301: kernel-kabi-dw-%{rpmversion}-%{distro_build}.tar.bz2 # Sources for kernel-tools Source2000: cpupower.service Source2001: cpupower.config Source2002: kvm_stat.logrotate # Some people enjoy building customized kernels from the dist-git in Fedora and # use this to override configuration options. One day they may all use the # source tree, but in the mean time we carry this to support the legacy workflow Source3000: merge.pl Source3001: kernel-local Source3003: Patchlist.changelog Source4000: README.rst Source4001: rpminspect.yaml Source4002: gating.yaml ## Patches needed for building this package %if !%{nopatches} Patch1: patch-%{patchversion}-redhat.patch %endif # empty final patch to facilitate testing of kernel patches Patch999999: linux-kernel-test.patch # END OF PATCH DEFINITIONS %description The kernel meta package # # This macro does requires, provides, conflicts, obsoletes for a kernel package. # %%kernel_reqprovconf # It uses any kernel__conflicts and kernel__obsoletes # macros defined above. # %define kernel_reqprovconf \ Provides: kernel = %{rpmversion}-%{pkg_release}\ Provides: kernel-%{_target_cpu} = %{rpmversion}-%{pkg_release}%{?1:+%{1}}\ Provides: kernel-drm-nouveau = 16\ Provides: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires(pre): %{kernel_prereq}\ Requires(pre): %{initrd_prereq}\ Requires(pre): linux-firmware >= 20150904-56.git6ebf5d57\ Requires(preun): systemd >= 200\ Conflicts: xfsprogs < 4.3.0-1\ Conflicts: xorg-x11-drv-vmmouse < 13.0.99\ %{expand:%%{?kernel%{?1:_%{1}}_conflicts:Conflicts: %%{kernel%{?1:_%{1}}_conflicts}}}\ %{expand:%%{?kernel%{?1:_%{1}}_obsoletes:Obsoletes: %%{kernel%{?1:_%{1}}_obsoletes}}}\ %{expand:%%{?kernel%{?1:_%{1}}_provides:Provides: %%{kernel%{?1:_%{1}}_provides}}}\ # We can't let RPM do the dependencies automatic because it'll then pick up\ # a correct but undesirable perl dependency from the module headers which\ # isn't required for the kernel proper to function\ AutoReq: no\ AutoProv: yes\ %{nil} %package doc Summary: Various documentation bits found in the kernel source Group: Documentation %description doc This package contains documentation files from the kernel source. Various bits of information about the Linux kernel and the device drivers shipped with it are documented in these files. You'll want to install this package if you need a reference to the options that can be passed to Linux kernel modules at load time. %package headers Summary: Header files for the Linux kernel for use by glibc Obsoletes: glibc-kernheaders < 3.0-46 Provides: glibc-kernheaders = 3.0-46 %description headers Kernel-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the glibc package. %package cross-headers Summary: Header files for the Linux kernel for use by cross-glibc %description cross-headers Kernel-cross-headers includes the C header files that specify the interface between the Linux kernel and userspace libraries and programs. The header files define structures and constants that are needed for building most standard programs and are also needed for rebuilding the cross-glibc package. %package debuginfo-common-%{_target_cpu} Summary: Kernel source files used by %{name}-debuginfo packages Provides: installonlypkg(kernel) %description debuginfo-common-%{_target_cpu} This package is required by %{name}-debuginfo subpackages. It provides the kernel source files common to all builds. %if %{with_perf} %package -n perf Summary: Performance monitoring for the Linux kernel Requires: bzip2 License: GPLv2 %description -n perf This package contains the perf tool, which enables performance monitoring of the Linux kernel. %package -n perf-debuginfo Summary: Debug information for package perf Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n perf-debuginfo This package provides debug information for the perf package. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/perf(\.debug)?|.*%%{_libexecdir}/perf-core/.*|.*%%{_libdir}/libperf-jvmti.so(\.debug)?|XXX' -o perf-debuginfo.list} %package -n python3-perf Summary: Python bindings for apps which will manipulate perf events %description -n python3-perf The python3-perf package contains a module that permits applications written in the Python programming language to use the interface to manipulate perf events. %package -n python3-perf-debuginfo Summary: Debug information for package perf python bindings Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n python3-perf-debuginfo This package provides debug information for the perf python bindings. # the python_sitearch macro should already be defined from above %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{python3_sitearch}/perf.*so(\.debug)?|XXX' -o python3-perf-debuginfo.list} # with_perf %endif %if %{with_tools} %package -n kernel-tools Summary: Assortment of tools for the Linux kernel License: GPLv2 %ifarch %{cpupowerarchs} Provides: cpupowerutils = 1:009-0.6.p1 Obsoletes: cpupowerutils < 1:009-0.6.p1 Provides: cpufreq-utils = 1:009-0.6.p1 Provides: cpufrequtils = 1:009-0.6.p1 Obsoletes: cpufreq-utils < 1:009-0.6.p1 Obsoletes: cpufrequtils < 1:009-0.6.p1 Obsoletes: cpuspeed < 1:1.5-16 Requires: kernel-tools-libs = %{version}-%{release} %endif %define __requires_exclude ^%{_bindir}/python %description -n kernel-tools This package contains the tools/ directory from the kernel source and the supporting documentation. %package -n kernel-tools-libs Summary: Libraries for the kernels-tools License: GPLv2 %description -n kernel-tools-libs This package contains the libraries built from the tools/ directory from the kernel source. %package -n kernel-tools-libs-devel Summary: Assortment of tools for the Linux kernel License: GPLv2 Requires: kernel-tools = %{version}-%{release} %ifarch %{cpupowerarchs} Provides: cpupowerutils-devel = 1:009-0.6.p1 Obsoletes: cpupowerutils-devel < 1:009-0.6.p1 %endif Requires: kernel-tools-libs = %{version}-%{release} Provides: kernel-tools-devel %description -n kernel-tools-libs-devel This package contains the development files for the tools/ directory from the kernel source. %package -n kernel-tools-debuginfo Summary: Debug information for package kernel-tools Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n kernel-tools-debuginfo This package provides debug information for package kernel-tools. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_bindir}/centrino-decode(\.debug)?|.*%%{_bindir}/powernow-k8-decode(\.debug)?|.*%%{_bindir}/cpupower(\.debug)?|.*%%{_libdir}/libcpupower.*|.*%%{_bindir}/turbostat(\.debug)?|.*%%{_bindir}/x86_energy_perf_policy(\.debug)?|.*%%{_bindir}/tmon(\.debug)?|.*%%{_bindir}/lsgpio(\.debug)?|.*%%{_bindir}/gpio-hammer(\.debug)?|.*%%{_bindir}/gpio-event-mon(\.debug)?|.*%%{_bindir}/gpio-watch(\.debug)?|.*%%{_bindir}/iio_event_monitor(\.debug)?|.*%%{_bindir}/iio_generic_buffer(\.debug)?|.*%%{_bindir}/lsiio(\.debug)?|.*%%{_bindir}/intel-speed-select(\.debug)?|.*%%{_bindir}/page_owner_sort(\.debug)?|.*%%{_bindir}/slabinfo(\.debug)?|XXX' -o kernel-tools-debuginfo.list} # with_tools %endif %if %{with_bpftool} %package -n bpftool Summary: Inspection and simple manipulation of eBPF programs and maps License: GPLv2 %description -n bpftool This package contains the bpftool, which allows inspection and simple manipulation of eBPF programs and maps. %package -n bpftool-debuginfo Summary: Debug information for package bpftool Group: Development/Debug Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release} AutoReqProv: no %description -n bpftool-debuginfo This package provides debug information for the bpftool package. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_sbindir}/bpftool(\.debug)?|XXX' -o bpftool-debuginfo.list} # with_bpftool %endif %if %{with_selftests} %package selftests-internal Summary: Kernel samples and selftests License: GPLv2 Requires: binutils, bpftool, iproute-tc, nmap-ncat, python3 %description selftests-internal Kernel sample programs and selftests. # Note that this pattern only works right to match the .build-id # symlinks because of the trailing nonmatching alternation and # the leading .*, because of find-debuginfo.sh's buggy handling # of matching the pattern against the symlinks file. %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*%%{_libexecdir}/(ksamples|kselftests)/.*|XXX' -o selftests-debuginfo.list} # with_selftests %endif %if %{with_gcov} %package gcov Summary: gcov graph and source files for coverage data collection. %description gcov kernel-gcov includes the gcov graph and source files for gcov coverage collection. %endif %package -n kernel-abi-stablelists Summary: The Red Hat Enterprise Linux kernel ABI symbol stablelists AutoReqProv: no %description -n kernel-abi-stablelists The kABI package contains information pertaining to the Red Hat Enterprise Linux kernel ABI, including lists of kernel symbols that are needed by external Linux kernel modules, and a yum plugin to aid enforcement. %if %{with_kabidw_base} %package kernel-kabidw-base-internal Summary: The baseline dataset for kABI verification using DWARF data Group: System Environment/Kernel AutoReqProv: no %description kernel-kabidw-base-internal The package contains data describing the current ABI of the Red Hat Enterprise Linux kernel, suitable for the kabi-dw tool. %endif # # This macro creates a kernel--debuginfo package. # %%kernel_debuginfo_package # # Explanation of the find_debuginfo_opts: We build multiple kernels (debug # pae etc.) so the regex filters those kernels appropriately. We also # have to package several binaries as part of kernel-devel but getting # unique build-ids is tricky for these userspace binaries. We don't really # care about debugging those so we just filter those out and remove it. %define kernel_debuginfo_package() \ %package %{?1:%{1}-}debuginfo\ Summary: Debug information for package %{name}%{?1:-%{1}}\ Requires: %{name}-debuginfo-common-%{_target_cpu} = %{version}-%{release}\ Provides: %{name}%{?1:-%{1}}-debuginfo-%{_target_cpu} = %{version}-%{release}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ %description %{?1:%{1}-}debuginfo\ This package provides debug information for package %{name}%{?1:-%{1}}.\ This is required to use SystemTap with %{name}%{?1:-%{1}}-%{KVERREL}.\ %{expand:%%global _find_debuginfo_opts %{?_find_debuginfo_opts} -p '.*\/usr\/src\/kernels/.*|XXX' -o ignored-debuginfo.list -p '/.*/%%{KVERREL_RE}%{?1:[+]%{1}}/.*|/.*%%{KVERREL_RE}%{?1:\+%{1}}(\.debug)?' -o debuginfo%{?1}.list}\ %{nil} # # This macro creates a kernel--devel package. # %%kernel_devel_package [-m] # %define kernel_devel_package(m) \ %package %{?1:%{1}-}devel\ Summary: Development package for building kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-devel-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-devel-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-devel-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ AutoReqProv: no\ Requires(pre): findutils\ Requires: findutils\ Requires: perl-interpreter\ Requires: openssl-devel\ Requires: elfutils-libelf-devel\ Requires: bison\ Requires: flex\ Requires: make\ Requires: gcc\ %if %{-m:1}%{!-m:0}\ Requires: kernel-devel-uname-r = %{KVERREL}\ %endif\ %description %{?1:%{1}-}devel\ This package provides kernel headers and makefiles sufficient to build modules\ against the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates an empty kernel--devel-matched package that # requires both the core and devel packages locked on the same version. # %%kernel_devel_matched_package [-m] # %define kernel_devel_matched_package(m) \ %package %{?1:%{1}-}devel-matched\ Summary: Meta package to install matching core and devel packages for a given %{?2:%{2} }kernel\ Requires: kernel%{?1:-%{1}}-devel = %{version}-%{release}\ Requires: kernel%{?1:-%{1}}-core = %{version}-%{release}\ %description %{?1:%{1}-}devel-matched\ This meta package is used to install matching core and devel packages for a given %{?2:%{2} }kernel.\ %{nil} # # kernel--ipaclones-internal package # %define kernel_ipaclones_package() \ %package %{?1:%{1}-}ipaclones-internal\ Summary: *.ipa-clones files generated by -fdump-ipa-clones for kernel%{?1:-%{1}}\ Group: System Environment/Kernel\ AutoReqProv: no\ %description %{?1:%{1}-}ipaclones-internal\ This package provides *.ipa-clones files.\ %{nil} # # This macro creates a kernel--modules-internal package. # %%kernel_modules_internal_package # %define kernel_modules_internal_package() \ %package %{?1:%{1}-}modules-internal\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Group: System Environment/Kernel\ Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-internal-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-internal = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-internal-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-internal\ This package provides kernel modules for the %{?2:%{2} }kernel package for Red Hat internal usage.\ %{nil} # # This macro creates a kernel--modules-extra package. # %%kernel_modules_extra_package [-m] # %define kernel_modules_extra_package(m) \ %package %{?1:%{1}-}modules-extra\ Summary: Extra kernel modules to match the %{?2:%{2} }kernel\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}\ Provides: kernel%{?1:-%{1}}-modules-extra-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel%{?1:-%{1}}-modules-extra = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-extra-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ %if %{-m:1}%{!-m:0}\ Requires: kernel-modules-extra-uname-r = %{KVERREL}\ %endif\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules-extra\ This package provides less commonly used kernel modules for the %{?2:%{2} }kernel package.\ %{nil} # # This macro creates a kernel--modules package. # %%kernel_modules_package [-m] # %define kernel_modules_package(m) \ %package %{?1:%{1}-}modules\ Summary: kernel modules to match the %{?2:%{2}-}core kernel\ Provides: kernel%{?1:-%{1}}-modules-%{_target_cpu} = %{version}-%{release}\ Provides: kernel-modules-%{_target_cpu} = %{version}-%{release}%{?1:+%{1}}\ Provides: kernel-modules = %{version}-%{release}%{?1:+%{1}}\ Provides: installonlypkg(kernel-module)\ Provides: kernel%{?1:-%{1}}-modules-uname-r = %{KVERREL}%{?1:+%{1}}\ Requires: kernel-uname-r = %{KVERREL}%{?1:+%{1}}\ %if %{-m:1}%{!-m:0}\ Requires: kernel-modules-uname-r = %{KVERREL}\ %endif\ AutoReq: no\ AutoProv: yes\ %description %{?1:%{1}-}modules\ This package provides commonly used kernel modules for the %{?2:%{2}-}core kernel package.\ %{nil} # # this macro creates a kernel- meta package. # %%kernel_meta_package # %define kernel_meta_package() \ %package %{1}\ summary: kernel meta-package for the %{1} kernel\ Requires: kernel-%{1}-core-uname-r = %{KVERREL}+%{1}\ Requires: kernel-%{1}-modules-uname-r = %{KVERREL}+%{1}\ Provides: installonlypkg(kernel)\ %description %{1}\ The meta-package for the %{1} kernel\ %{nil} # # This macro creates a kernel- and its -devel and -debuginfo too. # %%define variant_summary The Linux kernel compiled for # %%kernel_variant_package [-n ] [-m] # %define kernel_variant_package(n:m) \ %package %{?1:%{1}-}core\ Summary: %{variant_summary}\ Provides: kernel-%{?1:%{1}-}core-uname-r = %{KVERREL}%{?1:+%{1}}\ Provides: installonlypkg(kernel)\ %if %{-m:1}%{!-m:0}\ Requires: kernel-core-uname-r = %{KVERREL}\ %endif\ %{expand:%%kernel_reqprovconf}\ %if %{?1:1} %{!?1:0} \ %{expand:%%kernel_meta_package %{?1:%{1}}}\ %endif\ %{expand:%%kernel_devel_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{expand:%%kernel_devel_matched_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{expand:%%kernel_modules_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %{expand:%%kernel_modules_extra_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}} %{-m:%{-m}}}\ %if %{-m:0}%{!-m:1}\ %{expand:%%kernel_modules_internal_package %{?1:%{1}} %{!?{-n}:%{1}}%{?{-n}:%{-n*}}}\ %{expand:%%kernel_debuginfo_package %{?1:%{1}}}\ %endif\ %{nil} # Now, each variant package. %if %{with_pae} %define variant_summary The Linux kernel compiled for Cortex-A15 %kernel_variant_package lpae %description lpae-core This package includes a version of the Linux kernel with support for Cortex-A15 devices with LPAE and HW virtualisation support %endif %if %{with_zfcpdump} %define variant_summary The Linux kernel compiled for zfcpdump usage %kernel_variant_package zfcpdump %description zfcpdump-core The kernel package contains the Linux kernel (vmlinuz) for use by the zfcpdump infrastructure. # with_zfcpdump %endif %define variant_summary The Linux kernel compiled with extra debugging enabled %if !%{debugbuildsenabled} %kernel_variant_package -m debug %else %kernel_variant_package debug %endif %description debug-core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. This variant of the kernel has numerous debugging options enabled. It should only be installed when trying to gather additional information on kernel bugs, as some of these options impact performance noticably. # And finally the main -core package %define variant_summary The Linux kernel %kernel_variant_package %description core The kernel package contains the Linux kernel (vmlinuz), the core of any Linux operating system. The kernel handles the basic functions of the operating system: memory allocation, process allocation, device input and output, etc. %if %{with_ipaclones} %kernel_ipaclones_package %endif %prep # do a few sanity-checks for --with *only builds %if %{with_baseonly} %if !%{with_up} echo "Cannot build --with baseonly, up build is disabled" exit 1 %endif %endif # more sanity checking; do it quietly if [ "%{patches}" != "%%{patches}" ] ; then for patch in %{patches} ; do if [ ! -f $patch ] ; then echo "ERROR: Patch ${patch##/*/} listed in specfile but is missing" exit 1 fi done fi 2>/dev/null patch_command='patch -p1 -F1 -s' ApplyPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi if ! grep -E "^Patch[0-9]+: $patch\$" %{_specdir}/${RPM_PACKAGE_NAME}.spec ; then if [ "${patch:0:8}" != "patch-5." ] ; then echo "ERROR: Patch $patch not listed as a source patch in specfile" exit 1 fi fi 2>/dev/null case "$patch" in *.bz2) bunzip2 < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.gz) gunzip < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *.xz) unxz < "$RPM_SOURCE_DIR/$patch" | $patch_command ${1+"$@"} ;; *) $patch_command ${1+"$@"} < "$RPM_SOURCE_DIR/$patch" ;; esac } # don't apply patch if it's empty ApplyOptionalPatch() { local patch=$1 shift if [ ! -f $RPM_SOURCE_DIR/$patch ]; then exit 1 fi local C=$(wc -l $RPM_SOURCE_DIR/$patch | awk '{print $1}') if [ "$C" -gt 9 ]; then ApplyPatch $patch ${1+"$@"} fi } %setup -q -n kernel-5.15-rc2-51-g58e2cf5d7946 -c mv linux-5.15-rc2-51-g58e2cf5d7946 linux-%{KVERREL} cd linux-%{KVERREL} cp -a %{SOURCE1} . %if !%{nopatches} ApplyOptionalPatch patch-%{patchversion}-redhat.patch %endif ApplyOptionalPatch linux-kernel-test.patch # END OF PATCH APPLICATIONS # Any further pre-build tree manipulations happen here. chmod +x scripts/checkpatch.pl mv COPYING COPYING-%{version}-%{release} # This Prevents scripts/setlocalversion from mucking with our version numbers. touch .scmversion # Mangle /usr/bin/python shebangs to /usr/bin/python3 # Mangle all Python shebangs to be Python 3 explicitly # -p preserves timestamps # -n prevents creating ~backup files # -i specifies the interpreter for the shebang # This fixes errors such as # *** ERROR: ambiguous python shebang in /usr/bin/kvm_stat: #!/usr/bin/python. Change it to python3 (or python2) explicitly. # We patch all sources below for which we got a report/error. pathfix.py -i "%{__python3} %{py3_shbang_opts}" -p -n \ tools/kvm/kvm_stat/kvm_stat \ scripts/show_delta \ scripts/diffconfig \ scripts/bloat-o-meter \ scripts/jobserver-exec \ tools \ Documentation \ scripts/clang-tools # only deal with configs if we are going to build for the arch %ifnarch %nobuildarches if [ -L configs ]; then rm -f configs fi mkdir configs cd configs # Drop some necessary files from the source dir into the buildroot cp $RPM_SOURCE_DIR/kernel-*.config . cp %{SOURCE51} . # merge.pl cp %{SOURCE3000} . # kernel-local cp %{SOURCE3001} . VERSION=%{version} ./generate_all_configs.sh %{primary_target} %{debugbuildsenabled} # Merge in any user-provided local config option changes %ifnarch %nobuildarches for i in %{all_arch_configs} do mv $i $i.tmp ./merge.pl %{SOURCE3001} $i.tmp > $i rm $i.tmp done %endif # enable GCOV kernel config options if gcov is on %if %{with_gcov} for i in *.config do sed -i 's/# CONFIG_GCOV_KERNEL is not set/CONFIG_GCOV_KERNEL=y\nCONFIG_GCOV_PROFILE_ALL=y\n/' $i done %endif %if %{with clang_lto} for i in *aarch64*.config *x86_64*.config; do sed -i 's/# CONFIG_LTO_CLANG_THIN is not set/CONFIG_LTO_CLANG_THIN=y/' $i sed -i 's/CONFIG_LTO_NONE=y/# CONFIG_LTO_NONE is not set/' $i done %endif # Add DUP and kpatch certificates to system trusted keys for RHEL %if 0%{?rhel} %if %{signkernel}%{signmodules} openssl x509 -inform der -in %{SOURCE100} -out rheldup3.pem openssl x509 -inform der -in %{SOURCE101} -out rhelkpatch1.pem cat rheldup3.pem rhelkpatch1.pem > ../certs/rhel.pem %ifarch s390x ppc64le openssl x509 -inform der -in %{secureboot_ca_0} -out secureboot.pem cat secureboot.pem >> ../certs/rhel.pem %endif for i in *.config; do sed -i 's@CONFIG_SYSTEM_TRUSTED_KEYS=""@CONFIG_SYSTEM_TRUSTED_KEYS="certs/rhel.pem"@' $i done %endif %endif cp %{SOURCE52} . OPTS="" %if %{with_configchecks} OPTS="$OPTS -w -n -c" %endif %if %{with clang_lto} for opt in %{clang_make_opts}; do OPTS="$OPTS -m $opt" done %endif ./process_configs.sh $OPTS kernel %{rpmversion} cp %{SOURCE56} . RPM_SOURCE_DIR=$RPM_SOURCE_DIR ./update_scripts.sh %{primary_target} # end of kernel config %endif cd .. # # End of Configs stuff # get rid of unwanted files resulting from patch fuzz find . \( -name "*.orig" -o -name "*~" \) -delete >/dev/null # remove unnecessary SCM files find . -name .gitignore -delete >/dev/null cd .. ### ### build ### %build %if %{with_sparse} %define sparse_mflags C=1 %endif cp_vmlinux() { eu-strip --remove-comment -o "$2" "$1" } # Note we need to disable these flags for cross builds because the flags # from redhat-rpm-config assume that host == target so target arch # flags cause issues with the host compiler. %if !%{with_cross} %define build_hostcflags %{?build_cflags} %define build_hostldflags %{?build_ldflags} %endif %define make %{__make} %{?cross_opts} %{?make_opts} HOSTCFLAGS="%{?build_hostcflags}" HOSTLDFLAGS="%{?build_hostldflags}" InitBuildVars() { # Initialize the kernel .config file and create some variables that are # needed for the actual build process. Variant=$1 # Pick the right kernel config file Config=kernel-%{version}-%{_target_cpu}${Variant:+-${Variant}}.config DevelDir=/usr/src/kernels/%{KVERREL}${Variant:++${Variant}} KernelVer=%{version}-%{release}.%{_target_cpu}${Variant:++${Variant}} # make sure EXTRAVERSION says what we want it to say # Trim the release if this is a CI build, since KERNELVERSION is limited to 64 characters ShortRel=$(perl -e "print \"%{release}\" =~ s/\.pr\.[0-9A-Fa-f]{32}//r") perl -p -i -e "s/^EXTRAVERSION.*/EXTRAVERSION = -${ShortRel}.%{_target_cpu}${Variant:++${Variant}}/" Makefile # if pre-rc1 devel kernel, must fix up PATCHLEVEL for our versioning scheme # if we are post rc1 this should match anyway so this won't matter perl -p -i -e 's/^PATCHLEVEL.*/PATCHLEVEL = %{patchlevel}/' Makefile %{make} %{?_smp_mflags} mrproper cp configs/$Config .config %if %{signkernel}%{signmodules} cp $RPM_SOURCE_DIR/x509.genkey certs/. %endif Arch=`head -1 .config | cut -b 3-` echo USING ARCH=$Arch KCFLAGS="%{?kcflags}" # add kpatch flags for base kernel if [ "$Variant" == "" ]; then KCFLAGS="$KCFLAGS %{?kpatch_kcflags}" fi } BuildKernel() { MakeTarget=$1 KernelImage=$2 DoVDSO=$3 Variant=$4 InstallName=${5:-vmlinuz} DoModules=1 if [ "$Variant" = "zfcpdump" ]; then DoModules=0 fi # When the bootable image is just the ELF kernel, strip it. # We already copy the unstripped file into the debuginfo package. if [ "$KernelImage" = vmlinux ]; then CopyKernel=cp_vmlinux else CopyKernel=cp fi InitBuildVars $Variant echo BUILDING A KERNEL FOR ${Variant} %{_target_cpu}... %{make} ARCH=$Arch olddefconfig >/dev/null # This ensures build-ids are unique to allow parallel debuginfo perl -p -i -e "s/^CONFIG_BUILD_SALT.*/CONFIG_BUILD_SALT=\"%{KVERREL}\"/" .config %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} $MakeTarget %{?sparse_mflags} %{?kernel_mflags} if [ $DoModules -eq 1 ]; then %{make} ARCH=$Arch KCFLAGS="$KCFLAGS" WITH_GCOV="%{?with_gcov}" %{?_smp_mflags} modules %{?sparse_mflags} || exit 1 fi mkdir -p $RPM_BUILD_ROOT/%{image_install_path} mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer %if %{with_debuginfo} mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/%{image_install_path} %endif %ifarch %{arm} aarch64 %{make} ARCH=$Arch dtbs INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer %{make} ARCH=$Arch dtbs_install INSTALL_DTBS_PATH=$RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer cp -r $RPM_BUILD_ROOT/%{image_install_path}/dtb-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/dtb find arch/$Arch/boot/dts -name '*.dtb' -type f -delete %endif # Start installing the results install -m 644 .config $RPM_BUILD_ROOT/boot/config-$KernelVer install -m 644 .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/config install -m 644 System.map $RPM_BUILD_ROOT/boot/System.map-$KernelVer install -m 644 System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/System.map # We estimate the size of the initramfs because rpm needs to take this size # into consideration when performing disk space calculations. (See bz #530778) dd if=/dev/zero of=$RPM_BUILD_ROOT/boot/initramfs-$KernelVer.img bs=1M count=20 if [ -f arch/$Arch/boot/zImage.stub ]; then cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/%{image_install_path}/zImage.stub-$KernelVer || : cp arch/$Arch/boot/zImage.stub $RPM_BUILD_ROOT/lib/modules/$KernelVer/zImage.stub-$KernelVer || : fi %if %{signkernel} if [ "$KernelImage" = vmlinux ]; then # We can't strip and sign $KernelImage in place, because # we need to preserve original vmlinux for debuginfo. # Use a copy for signing. $CopyKernel $KernelImage $KernelImage.tosign KernelImage=$KernelImage.tosign CopyKernel=cp fi # Sign the image if we're using EFI # aarch64 kernels are gziped EFI images KernelExtension=${KernelImage##*.} if [ "$KernelExtension" == "gz" ]; then SignImage=${KernelImage%.*} else SignImage=$KernelImage fi %ifarch x86_64 aarch64 %pesign -s -i $SignImage -o vmlinuz.tmp -a %{secureboot_ca_0} -c %{secureboot_key_0} -n %{pesign_name_0} %pesign -s -i vmlinuz.tmp -o vmlinuz.signed -a %{secureboot_ca_1} -c %{secureboot_key_1} -n %{pesign_name_1} rm vmlinuz.tmp %endif %ifarch s390x ppc64le if [ -x /usr/bin/rpm-sign ]; then rpm-sign --key "%{pesign_name_0}" --lkmsign $SignImage --output vmlinuz.signed elif [ $DoModules -eq 1 ]; then chmod +x scripts/sign-file ./scripts/sign-file -p sha256 certs/signing_key.pem certs/signing_key.x509 $SignImage vmlinuz.signed else mv $SignImage vmlinuz.signed fi %endif if [ ! -s vmlinuz.signed ]; then echo "pesigning failed" exit 1 fi mv vmlinuz.signed $SignImage if [ "$KernelExtension" == "gz" ]; then gzip -f9 $SignImage fi # signkernel %endif $CopyKernel $KernelImage \ $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer chmod 755 $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer cp $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer $RPM_BUILD_ROOT/lib/modules/$KernelVer/$InstallName # hmac sign the kernel for FIPS echo "Creating hmac file: $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac" ls -l $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer sha512hmac $RPM_BUILD_ROOT/%{image_install_path}/$InstallName-$KernelVer | sed -e "s,$RPM_BUILD_ROOT,," > $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac; cp $RPM_BUILD_ROOT/%{image_install_path}/.vmlinuz-$KernelVer.hmac $RPM_BUILD_ROOT/lib/modules/$KernelVer/.vmlinuz.hmac if [ $DoModules -eq 1 ]; then # Override $(mod-fw) because we don't want it to install any firmware # we'll get it from the linux-firmware package and we don't want conflicts %{make} %{?_smp_mflags} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT %{?_smp_mflags} modules_install KERNELRELEASE=$KernelVer mod-fw= fi %if %{with_gcov} # install gcov-needed files to $BUILDROOT/$BUILD/...: # gcov_info->filename is absolute path # gcno references to sources can use absolute paths (e.g. in out-of-tree builds) # sysfs symlink targets (set up at compile time) use absolute paths to BUILD dir find . \( -name '*.gcno' -o -name '*.[chS]' \) -exec install -D '{}' "$RPM_BUILD_ROOT/$(pwd)/{}" \; %endif # add an a noop %%defattr statement 'cause rpm doesn't like empty file list files echo '%%defattr(-,-,-)' > ../kernel${Variant:+-${Variant}}-ldsoconf.list if [ $DoVDSO -ne 0 ]; then %{make} ARCH=$Arch INSTALL_MOD_PATH=$RPM_BUILD_ROOT vdso_install KERNELRELEASE=$KernelVer if [ -s ldconfig-kernel.conf ]; then install -D -m 444 ldconfig-kernel.conf \ $RPM_BUILD_ROOT/etc/ld.so.conf.d/kernel-$KernelVer.conf echo /etc/ld.so.conf.d/kernel-$KernelVer.conf >> ../kernel${Variant:+-${Variant}}-ldsoconf.list fi rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/vdso/.build-id fi # And save the headers/makefiles etc for building modules against # # This all looks scary, but the end result is supposed to be: # * all arch relevant include/ files # * all Makefile/Kconfig files # * all script/ files rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/source mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build (cd $RPM_BUILD_ROOT/lib/modules/$KernelVer ; ln -s build source) # dirs for additional modules per module-init-tools, kbuild/modules.txt mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/updates mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/weak-updates # CONFIG_KERNEL_HEADER_TEST generates some extra files in the process of # testing so just delete find . -name *.h.s -delete # first copy everything cp --parents `find -type f -name "Makefile*" -o -name "Kconfig*"` $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ ! -e Module.symvers ]; then touch Module.symvers fi cp Module.symvers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp System.map $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -s Module.markers ]; then cp Module.markers $RPM_BUILD_ROOT/lib/modules/$KernelVer/build fi # create the kABI metadata for use in packaging # NOTENOTE: the name symvers is used by the rpm backend # NOTENOTE: to discover and run the /usr/lib/rpm/fileattrs/kabi.attr # NOTENOTE: script which dynamically adds exported kernel symbol # NOTENOTE: checksums to the rpm metadata provides list. # NOTENOTE: if you change the symvers name, update the backend too echo "**** GENERATING kernel ABI metadata ****" gzip -c9 < Module.symvers > $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz cp $RPM_BUILD_ROOT/boot/symvers-$KernelVer.gz $RPM_BUILD_ROOT/lib/modules/$KernelVer/symvers.gz %if %{with_kabichk} echo "**** kABI checking is enabled in kernel SPEC file. ****" chmod 0755 $RPM_SOURCE_DIR/check-kabi if [ -e $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant ]; then cp $RPM_SOURCE_DIR/Module.kabi_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 # for now, don't keep it around. rm $RPM_BUILD_ROOT/Module.kabi else echo "**** NOTE: Cannot find reference Module.kabi file. ****" fi %endif %if %{with_kabidupchk} echo "**** kABI DUP checking is enabled in kernel SPEC file. ****" if [ -e $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant ]; then cp $RPM_SOURCE_DIR/Module.kabi_dup_%{_target_cpu}$Variant $RPM_BUILD_ROOT/Module.kabi $RPM_SOURCE_DIR/check-kabi -k $RPM_BUILD_ROOT/Module.kabi -s Module.symvers || exit 1 # for now, don't keep it around. rm $RPM_BUILD_ROOT/Module.kabi else echo "**** NOTE: Cannot find DUP reference Module.kabi file. ****" fi %endif %if %{with_kabidw_base} # Don't build kabi base for debug kernels if [ "$Variant" != "zfcpdump" -a "$Variant" != "debug" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists echo "**** GENERATING DWARF-based kABI baseline dataset ****" chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \ "$(pwd)" \ "$RPM_BUILD_ROOT/kabidw-base/%{_target_cpu}${Variant:+.${Variant}}" || : rm -rf $RPM_BUILD_ROOT/kabi-dwarf fi %endif %if %{with_kabidwchk} if [ "$Variant" != "zfcpdump" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf tar xjvf %{SOURCE301} -C $RPM_BUILD_ROOT/kabi-dwarf if [ -d "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" ]; then mkdir -p $RPM_BUILD_ROOT/kabi-dwarf/stablelists tar xjvf %{SOURCE300} -C $RPM_BUILD_ROOT/kabi-dwarf/stablelists echo "**** GENERATING DWARF-based kABI dataset ****" chmod 0755 $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh generate \ "$RPM_BUILD_ROOT/kabi-dwarf/stablelists/kabi-current/kabi_stablelist_%{_target_cpu}" \ "$(pwd)" \ "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || : echo "**** kABI DWARF-based comparison report ****" $RPM_BUILD_ROOT/kabi-dwarf/run_kabi-dw.sh compare \ "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}" \ "$RPM_BUILD_ROOT/kabi-dwarf/base/%{_target_cpu}${Variant:+.${Variant}}.tmp" || : echo "**** End of kABI DWARF-based comparison report ****" else echo "**** Baseline dataset for kABI DWARF-BASED comparison report not found ****" fi rm -rf $RPM_BUILD_ROOT/kabi-dwarf fi %endif # then drop all but the needed Makefiles/Kconfig files rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include cp .config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build rm -rf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/tracing rm -f $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts/spdxcheck.py # Files for 'make scripts' to succeed with kernel-devel. mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/security/selinux/include cp -a --parents security/selinux/include/classmap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents security/selinux/include/initial_sid_to_string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build mkdir -p $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/include/tools cp -a --parents tools/include/tools/be_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/tools/le_byteshift.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build # Files for 'make prepare' to succeed with kernel-devel. cp -a --parents tools/include/linux/compiler* $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/linux/types.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/build/Build.include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/build/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/build/fixdep.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/objtool/sync-check.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/bpf/resolve_btfids $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents security/selinux/include/policycap_names.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents security/selinux/include/policycap.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/uapi/asm-generic $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/uapi/linux $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/include/vdso $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/scripts/utilities.mak $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/lib/subcmd $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/lib/*.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/objtool/*.[ch] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/objtool/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/objtool/include/objtool/*.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/lib/bpf $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp --parents tools/lib/bpf/Build $RPM_BUILD_ROOT/lib/modules/$KernelVer/build if [ -f tools/objtool/objtool ]; then cp -a tools/objtool/objtool $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : fi if [ -f tools/objtool/fixdep ]; then cp -a tools/objtool/fixdep $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools/objtool/ || : fi if [ -d arch/$Arch/scripts ]; then cp -a arch/$Arch/scripts $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch} || : fi if [ -f arch/$Arch/*lds ]; then cp -a arch/$Arch/*lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/arch/%{_arch}/ || : fi if [ -f arch/%{asmarch}/kernel/module.lds ]; then cp -a --parents arch/%{asmarch}/kernel/module.lds $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/scripts \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} + %ifarch ppc64le cp -a --parents arch/powerpc/lib/crtsavres.[So] $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif if [ -d arch/%{asmarch}/include ]; then cp -a --parents arch/%{asmarch}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi %ifarch aarch64 # arch/arm64/include/asm/xen references arch/arm cp -a --parents arch/arm/include/asm/xen $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ # arch/arm64/include/asm/opcodes.h references arch/arm cp -a --parents arch/arm/include/asm/opcodes.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif # include the machine specific headers for ARM variants, if available. %ifarch %{arm} if [ -d arch/%{asmarch}/mach-${Variant}/include ]; then cp -a --parents arch/%{asmarch}/mach-${Variant}/include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ fi # include a few files for 'make prepare' cp -a --parents arch/arm/tools/gen-mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/arm/tools/mach-types $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ %endif cp -a include $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include %ifarch i686 x86_64 # files for 'make prepare' to succeed with kernel-devel cp -a --parents arch/x86/entry/syscalls/syscall_32.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/entry/syscalls/syscall_64.tbl $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_32.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_64.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs_common.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/tools/relocs.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/purgatory.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/stack.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/setup-x86_64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/purgatory/entry64.S $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/string.c $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents arch/x86/boot/ctype.h $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents scripts/syscalltbl.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents scripts/syscallhdr.sh $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/ cp -a --parents tools/arch/x86/include/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/arch/x86/include/uapi/asm $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/objtool/arch/x86/lib $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/arch/x86/lib/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/arch/x86/tools/gen-insn-attr-x86.awk $RPM_BUILD_ROOT/lib/modules/$KernelVer/build cp -a --parents tools/objtool/arch/x86/ $RPM_BUILD_ROOT/lib/modules/$KernelVer/build %endif # Clean up intermediate tools files find $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/tools \( -iname "*.o" -o -iname "*.cmd" \) -exec rm -f {} + # Make sure the Makefile and version.h have a matching timestamp so that # external modules can be built touch -r $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/Makefile $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/generated/uapi/linux/version.h # Copy .config to include/config/auto.conf so "make prepare" is unnecessary. cp $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/.config $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/include/config/auto.conf %if %{with_debuginfo} eu-readelf -n vmlinux | grep "Build ID" | awk '{print $NF}' > vmlinux.id cp vmlinux.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.id # # save the vmlinux file for kernel debugging into the kernel-debuginfo rpm # mkdir -p $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer cp vmlinux $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer if [ -n "%{vmlinux_decompressor}" ]; then eu-readelf -n %{vmlinux_decompressor} | grep "Build ID" | awk '{print $NF}' > vmlinux.decompressor.id # Without build-id the build will fail. But for s390 the build-id # wasn't added before 5.11. In case it is missing prefer not # packaging the debuginfo over a build failure. if [ -s vmlinux.decompressor.id ]; then cp vmlinux.decompressor.id $RPM_BUILD_ROOT/lib/modules/$KernelVer/build/vmlinux.decompressor.id cp %{vmlinux_decompressor} $RPM_BUILD_ROOT%{debuginfodir}/lib/modules/$KernelVer/vmlinux.decompressor fi fi %endif find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name "*.ko" -type f >modnames # mark modules executable so that strip-to-file can strip them xargs --no-run-if-empty chmod u+x < modnames # Generate a list of modules for block and networking. grep -F /drivers/ modnames | xargs --no-run-if-empty nm -upA | sed -n 's,^.*/\([^/]*\.ko\): *U \(.*\)$,\1 \2,p' > drivers.undef collect_modules_list() { sed -r -n -e "s/^([^ ]+) \\.?($2)\$/\\1/p" drivers.undef | LC_ALL=C sort -u > $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 if [ ! -z "$3" ]; then sed -r -e "/^($3)\$/d" -i $RPM_BUILD_ROOT/lib/modules/$KernelVer/modules.$1 fi } collect_modules_list networking \ 'register_netdev|ieee80211_register_hw|usbnet_probe|phy_driver_register|rt(l_|2x00)(pci|usb)_probe|register_netdevice' collect_modules_list block \ 'ata_scsi_ioctl|scsi_add_host|scsi_add_host_with_dma|blk_alloc_queue|blk_init_queue|register_mtd_blktrans|scsi_esp_register|scsi_register_device_handler|blk_queue_physical_block_size' 'pktcdvd.ko|dm-mod.ko' collect_modules_list drm \ 'drm_open|drm_init' collect_modules_list modesetting \ 'drm_crtc_init' # detect missing or incorrect license tags ( find $RPM_BUILD_ROOT/lib/modules/$KernelVer -name '*.ko' | xargs /sbin/modinfo -l | \ grep -E -v 'GPL( v2)?$|Dual BSD/GPL$|Dual MPL/GPL$|GPL and additional rights$' ) && exit 1 remove_depmod_files() { # remove files that will be auto generated by depmod at rpm -i time pushd $RPM_BUILD_ROOT/lib/modules/$KernelVer/ rm -f modules.{alias,alias.bin,builtin.alias.bin,builtin.bin} \ modules.{dep,dep.bin,devname,softdep,symbols,symbols.bin} popd } remove_depmod_files # Identify modules in the kernel-modules-extras package %{SOURCE17} $RPM_BUILD_ROOT lib/modules/$KernelVer $RPM_SOURCE_DIR/mod-extra.list # Identify modules in the kernel-modules-extras package %{SOURCE17} $RPM_BUILD_ROOT lib/modules/$KernelVer %{SOURCE54} internal # # Generate the kernel-core and kernel-modules files lists # # Copy the System.map file for depmod to use, and create a backup of the # full module tree so we can restore it after we're done filtering cp System.map $RPM_BUILD_ROOT/. pushd $RPM_BUILD_ROOT mkdir restore cp -r lib/modules/$KernelVer/* restore/. # don't include anything going into kernel-modules-extra in the file lists xargs rm -rf < mod-extra.list # don't include anything going int kernel-modules-internal in the file lists xargs rm -rf < mod-internal.list if [ $DoModules -eq 1 ]; then # Find all the module files and filter them out into the core and # modules lists. This actually removes anything going into -modules # from the dir. find lib/modules/$KernelVer/kernel -name *.ko | sort -n > modules.list cp $RPM_SOURCE_DIR/filter-*.sh . ./filter-modules.sh modules.list %{_target_cpu} rm filter-*.sh # Run depmod on the resulting module tree and make sure it isn't broken depmod -b . -aeF ./System.map $KernelVer &> depmod.out if [ -s depmod.out ]; then echo "Depmod failure" cat depmod.out exit 1 else rm depmod.out fi else # Ensure important files/directories exist to let the packaging succeed echo '%%defattr(-,-,-)' > modules.list echo '%%defattr(-,-,-)' > k-d.list mkdir -p lib/modules/$KernelVer/kernel # Add files usually created by make modules, needed to prevent errors # thrown by depmod during package installation touch lib/modules/$KernelVer/modules.order touch lib/modules/$KernelVer/modules.builtin fi remove_depmod_files # Go back and find all of the various directories in the tree. We use this # for the dir lists in kernel-core find lib/modules/$KernelVer/kernel -mindepth 1 -type d | sort -n > module-dirs.list # Cleanup rm System.map cp -r restore/* lib/modules/$KernelVer/. rm -rf restore popd # Make sure the files lists start with absolute paths or rpmbuild fails. # Also add in the dir entries sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/k-d.list > ../kernel${Variant:+-${Variant}}-modules.list sed -e 's/^lib*/%dir \/lib/' %{?zipsed} $RPM_BUILD_ROOT/module-dirs.list > ../kernel${Variant:+-${Variant}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/modules.list >> ../kernel${Variant:+-${Variant}}-core.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-extra.list >> ../kernel${Variant:+-${Variant}}-modules-extra.list sed -e 's/^lib*/\/lib/' %{?zipsed} $RPM_BUILD_ROOT/mod-internal.list >> ../kernel${Variant:+-${Variant}}-modules-internal.list # Cleanup rm -f $RPM_BUILD_ROOT/k-d.list rm -f $RPM_BUILD_ROOT/modules.list rm -f $RPM_BUILD_ROOT/module-dirs.list rm -f $RPM_BUILD_ROOT/mod-extra.list rm -f $RPM_BUILD_ROOT/mod-internal.list %if %{signmodules} if [ $DoModules -eq 1 ]; then # Save the signing keys so we can sign the modules in __modsign_install_post cp certs/signing_key.pem certs/signing_key.pem.sign${Variant:++${Variant}} cp certs/signing_key.x509 certs/signing_key.x509.sign${Variant:++${Variant}} fi %endif # Move the devel headers out of the root file system mkdir -p $RPM_BUILD_ROOT/usr/src/kernels mv $RPM_BUILD_ROOT/lib/modules/$KernelVer/build $RPM_BUILD_ROOT/$DevelDir # This is going to create a broken link during the build, but we don't use # it after this point. We need the link to actually point to something # when kernel-devel is installed, and a relative link doesn't work across # the F17 UsrMove feature. ln -sf $DevelDir $RPM_BUILD_ROOT/lib/modules/$KernelVer/build %ifnarch armv7hl # Generate vmlinux.h and put it to kernel-devel path bpftool btf dump file vmlinux format c > $RPM_BUILD_ROOT/$DevelDir/vmlinux.h %endif # prune junk from kernel-devel find $RPM_BUILD_ROOT/usr/src/kernels -name ".*.cmd" -delete # Generate crashkernel default config %{SOURCE57} "$KernelVer" "$Arch" "$RPM_BUILD_ROOT" # Red Hat UEFI Secure Boot CA cert, which can be used to authenticate the kernel mkdir -p $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer %ifarch x86_64 aarch64 install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20200609.cer install -m 0644 %{secureboot_ca_1} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca-20140212.cer ln -s kernel-signing-ca-20200609.cer $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer %else install -m 0644 %{secureboot_ca_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer %endif %ifarch s390x ppc64le if [ $DoModules -eq 1 ]; then if [ -x /usr/bin/rpm-sign ]; then install -m 0644 %{secureboot_key_0} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} else install -m 0644 certs/signing_key.x509.sign${Variant:++${Variant}} $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/kernel-signing-ca.cer openssl x509 -in certs/signing_key.pem.sign${Variant:++${Variant}} -outform der -out $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} chmod 0644 $RPM_BUILD_ROOT%{_datadir}/doc/kernel-keys/$KernelVer/%{signing_key_filename} fi fi %endif %if %{with_ipaclones} MAXPROCS=$(echo %{?_smp_mflags} | sed -n 's/-j\s*\([0-9]\+\)/\1/p') if [ -z "$MAXPROCS" ]; then MAXPROCS=1 fi if [ "$Variant" == "" ]; then mkdir -p $RPM_BUILD_ROOT/$DevelDir-ipaclones find . -name '*.ipa-clones' | xargs -i{} -r -n 1 -P $MAXPROCS install -m 644 -D "{}" "$RPM_BUILD_ROOT/$DevelDir-ipaclones/{}" fi %endif } ### # DO it... ### # prepare directories rm -rf $RPM_BUILD_ROOT mkdir -p $RPM_BUILD_ROOT/boot mkdir -p $RPM_BUILD_ROOT%{_libexecdir} cd linux-%{KVERREL} %if %{with_debug} BuildKernel %make_target %kernel_image %{_use_vdso} debug %endif %if %{with_zfcpdump} BuildKernel %make_target %kernel_image %{_use_vdso} zfcpdump %endif %if %{with_pae} BuildKernel %make_target %kernel_image %{use_vdso} lpae %endif %if %{with_up} BuildKernel %make_target %kernel_image %{_use_vdso} %endif %ifnarch noarch i686 %if !%{with_debug} && !%{with_zfcpdump} && !%{with_pae} && !%{with_up} # If only building the user space tools, then initialize the build environment # and some variables so that the various userspace tools can be built. InitBuildVars %endif %endif %ifarch aarch64 %global perf_build_extra_opts CORESIGHT=1 %endif %global perf_make \ %{__make} %{?make_opts} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?cross_opts} -C tools/perf V=1 NO_PERF_READ_VDSO32=1 NO_PERF_READ_VDSOX32=1 WERROR=0 NO_LIBUNWIND=1 HAVE_CPLUS_DEMANGLE=1 NO_GTK2=1 NO_STRLCPY=1 NO_BIONIC=1 LIBBPF_DYNAMIC=1 LIBTRACEEVENT_DYNAMIC=1 %{?perf_build_extra_opts} prefix=%{_prefix} PYTHON=%{__python3} %if %{with_perf} # perf # make sure check-headers.sh is executable chmod +x tools/perf/check-headers.sh %{perf_make} DESTDIR=$RPM_BUILD_ROOT all %endif %global tools_make \ %{make} CFLAGS="${RPM_OPT_FLAGS}" LDFLAGS="%{__global_ldflags}" %{?make_opts} %if %{with_tools} %ifarch %{cpupowerarchs} # cpupower # make sure version-gen.sh is executable. chmod +x tools/power/cpupower/utils/version-gen.sh %{tools_make} %{?_smp_mflags} -C tools/power/cpupower CPUFREQ_BENCH=false DEBUG=false %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 %{tools_make} %{?_smp_mflags} centrino-decode powernow-k8-decode popd %endif %ifarch x86_64 pushd tools/power/x86/x86_energy_perf_policy/ %{tools_make} popd pushd tools/power/x86/turbostat %{tools_make} popd pushd tools/power/x86/intel-speed-select %{make} popd %endif %endif pushd tools/thermal/tmon/ %{tools_make} popd pushd tools/iio/ %{tools_make} popd pushd tools/gpio/ %{tools_make} popd # build VM tools pushd tools/vm/ %{tools_make} slabinfo page_owner_sort popd %endif if [ -f $DevelDir/vmlinux.h ]; then RPM_VMLINUX_H=$DevelDir/vmlinux.h fi %global bpftool_make \ %{__make} EXTRA_CFLAGS="${RPM_OPT_FLAGS}" EXTRA_LDFLAGS="%{__global_ldflags}" DESTDIR=$RPM_BUILD_ROOT %{?make_opts} VMLINUX_H="${RPM_VMLINUX_H}" V=1 %if %{with_bpftool} pushd tools/bpf/bpftool %{bpftool_make} popd %endif %if %{with_selftests} # Unfortunately, samples/bpf/Makefile expects that the headers are installed # in the source tree. We installed them previously to $RPM_BUILD_ROOT/usr # but there's no way to tell the Makefile to take them from there. %{make} %{?_smp_mflags} headers_install %{make} %{?_smp_mflags} ARCH=$Arch V=1 M=samples/bpf/ # Prevent bpf selftests to build bpftool repeatedly: export BPFTOOL=$(pwd)/tools/bpf/bpftool/bpftool pushd tools/testing/selftests # We need to install here because we need to call make with ARCH set which # doesn't seem possible to do in the install section. %{make} %{?_smp_mflags} ARCH=$Arch V=1 TARGETS="bpf livepatch net net/forwarding net/mptcp netfilter tc-testing" SKIP_TARGETS="" INSTALL_PATH=%{buildroot}%{_libexecdir}/kselftests VMLINUX_H="${RPM_VMLINUX_H}" install # 'make install' for bpf is broken and upstream refuses to fix it. # Install the needed files manually. for dir in bpf bpf/no_alu32 bpf/progs; do # In ARK, the rpm build continues even if some of the selftests # cannot be built. It's not always possible to build selftests, # as upstream sometimes dependens on too new llvm version or has # other issues. If something did not get built, just skip it. test -d $dir || continue mkdir -p %{buildroot}%{_libexecdir}/kselftests/$dir find $dir -maxdepth 1 -type f \( -executable -o -name '*.py' -o -name settings -o \ -name 'btf_dump_test_case_*.c' -o \ -name '*.o' -exec sh -c 'readelf -h "{}" | grep -q "^ Machine:.*BPF"' \; \) -print0 | \ xargs -0 cp -t %{buildroot}%{_libexecdir}/kselftests/$dir || true done popd export -n BPFTOOL %endif %if %{with_doc} # Make the HTML pages. %{__make} PYTHON=/usr/bin/python3 htmldocs || %{doc_build_fail} # sometimes non-world-readable files sneak into the kernel source tree chmod -R a=rX Documentation find Documentation -type d | xargs chmod u+w %endif # In the modsign case, we do 3 things. 1) We check the "variant" and hard # code the value in the following invocations. This is somewhat sub-optimal # but we're doing this inside of an RPM macro and it isn't as easy as it # could be because of that. 2) We restore the .tmp_versions/ directory from # the one we saved off in BuildKernel above. This is to make sure we're # signing the modules we actually built/installed in that variant. 3) We # grab the arch and invoke mod-sign.sh command to actually sign the modules. # # We have to do all of those things _after_ find-debuginfo runs, otherwise # that will strip the signature off of the modules. # # Don't sign modules for the zfcpdump variant as it is monolithic. %define __modsign_install_post \ if [ "%{signmodules}" -eq "1" ]; then \ if [ "%{with_pae}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+lpae certs/signing_key.x509.sign+lpae $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+lpae/ \ fi \ if [ "%{with_debug}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign+debug certs/signing_key.x509.sign+debug $RPM_BUILD_ROOT/lib/modules/%{KVERREL}+debug/ \ fi \ if [ "%{with_up}" -ne "0" ]; then \ %{modsign_cmd} certs/signing_key.pem.sign certs/signing_key.x509.sign $RPM_BUILD_ROOT/lib/modules/%{KVERREL}/ \ fi \ fi \ if [ "%{zipmodules}" -eq "1" ]; then \ find $RPM_BUILD_ROOT/lib/modules/ -type f -name '*.ko' | xargs -P%{zcpu} xz; \ fi \ %{nil} ### ### Special hacks for debuginfo subpackages. ### # This macro is used by %%install, so we must redefine it before that. %define debug_package %{nil} %if %{with_debuginfo} %ifnarch noarch %global __debug_package 1 %files -f debugfiles.list debuginfo-common-%{_target_cpu} %endif %endif # We don't want to package debuginfo for self-tests and samples but # we have to delete them to avoid an error messages about unpackaged # files. # Delete the debuginfo for kernel-devel files %define __remove_unwanted_dbginfo_install_post \ if [ "%{with_selftests}" -ne "0" ]; then \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/ksamples; \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/libexec/kselftests; \ fi \ rm -rf $RPM_BUILD_ROOT/usr/lib/debug/usr/src; \ %{nil} # # Disgusting hack alert! We need to ensure we sign modules *after* all # invocations of strip occur, which is in __debug_install_post if # find-debuginfo.sh runs, and __os_install_post if not. # %define __spec_install_post \ %{?__debug_package:%{__debug_install_post}}\ %{__arch_install_post}\ %{__os_install_post}\ %{__remove_unwanted_dbginfo_install_post}\ %{__modsign_install_post} ### ### install ### %install cd linux-%{KVERREL} %if %{with_doc} docdir=$RPM_BUILD_ROOT%{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease} # copy the source over mkdir -p $docdir tar -h -f - --exclude=man --exclude='.*' -c Documentation | tar xf - -C $docdir # with_doc %endif # We have to do the headers install before the tools install because the # kernel headers_install will remove any header files in /usr/include that # it doesn't install itself. %if %{with_headers} # Install kernel headers %{__make} ARCH=%{hdrarch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr headers_install find $RPM_BUILD_ROOT/usr/include \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete %endif %if %{with_cross_headers} %if 0%{?fedora} HDR_ARCH_LIST='arm arm64 powerpc s390 x86' %else HDR_ARCH_LIST='arm64 powerpc s390 x86' %endif mkdir -p $RPM_BUILD_ROOT/usr/tmp-headers for arch in $HDR_ARCH_LIST; do mkdir $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} %{__make} ARCH=${arch} INSTALL_HDR_PATH=$RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch} headers_install done find $RPM_BUILD_ROOT/usr/tmp-headers \ \( -name .install -o -name .check -o \ -name ..install.cmd -o -name ..check.cmd \) -delete # Copy all the architectures we care about to their respective asm directories for arch in $HDR_ARCH_LIST ; do mkdir -p $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include mv $RPM_BUILD_ROOT/usr/tmp-headers/arch-${arch}/include/* $RPM_BUILD_ROOT/usr/${arch}-linux-gnu/include/ done rm -rf $RPM_BUILD_ROOT/usr/tmp-headers %endif %if %{with_kernel_abi_stablelists} # kabi directory INSTALL_KABI_PATH=$RPM_BUILD_ROOT/lib/modules/ mkdir -p $INSTALL_KABI_PATH # install kabi releases directories tar xjvf %{SOURCE300} -C $INSTALL_KABI_PATH # with_kernel_abi_stablelists %endif %if %{with_perf} # perf tool binary and supporting scripts/binaries %{perf_make} DESTDIR=$RPM_BUILD_ROOT lib=%{_lib} install-bin # remove the 'trace' symlink. rm -f %{buildroot}%{_bindir}/trace # For both of the below, yes, this should be using a macro but right now # it's hard coded and we don't actually want it anyway right now. # Whoever wants examples can fix it up! # remove examples rm -rf %{buildroot}/usr/lib/perf/examples rm -rf %{buildroot}/usr/lib/perf/include # python-perf extension %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-python_ext # perf man pages (note: implicit rpm magic compresses them later) mkdir -p %{buildroot}/%{_mandir}/man1 %{perf_make} DESTDIR=$RPM_BUILD_ROOT install-man # remove any tracevent files, eg. its plugins still gets built and installed, # even if we build against system's libtracevent during perf build (by setting # LIBTRACEEVENT_DYNAMIC=1 above in perf_make macro). Those files should already # ship with libtraceevent package. rm -rf %{buildroot}%{_libdir}/traceevent %endif %if %{with_tools} %ifarch %{cpupowerarchs} %{make} -C tools/power/cpupower DESTDIR=$RPM_BUILD_ROOT libdir=%{_libdir} mandir=%{_mandir} CPUFREQ_BENCH=false install rm -f %{buildroot}%{_libdir}/*.{a,la} %find_lang cpupower mv cpupower.lang ../ %ifarch x86_64 pushd tools/power/cpupower/debug/x86_64 install -m755 centrino-decode %{buildroot}%{_bindir}/centrino-decode install -m755 powernow-k8-decode %{buildroot}%{_bindir}/powernow-k8-decode popd %endif chmod 0755 %{buildroot}%{_libdir}/libcpupower.so* mkdir -p %{buildroot}%{_unitdir} %{buildroot}%{_sysconfdir}/sysconfig install -m644 %{SOURCE2000} %{buildroot}%{_unitdir}/cpupower.service install -m644 %{SOURCE2001} %{buildroot}%{_sysconfdir}/sysconfig/cpupower %endif %ifarch x86_64 mkdir -p %{buildroot}%{_mandir}/man8 pushd tools/power/x86/x86_energy_perf_policy %{tools_make} DESTDIR=%{buildroot} install popd pushd tools/power/x86/turbostat %{tools_make} DESTDIR=%{buildroot} install popd pushd tools/power/x86/intel-speed-select %{tools_make} CFLAGS+="-D_GNU_SOURCE -Iinclude" DESTDIR=%{buildroot} install popd %endif pushd tools/thermal/tmon %{tools_make} INSTALL_ROOT=%{buildroot} install popd pushd tools/iio %{tools_make} DESTDIR=%{buildroot} install popd pushd tools/gpio %{tools_make} DESTDIR=%{buildroot} install popd install -m644 -D %{SOURCE2002} %{buildroot}%{_sysconfdir}/logrotate.d/kvm_stat pushd tools/kvm/kvm_stat %{__make} INSTALL_ROOT=%{buildroot} install-tools %{__make} INSTALL_ROOT=%{buildroot} install-man install -m644 -D kvm_stat.service %{buildroot}%{_unitdir}/kvm_stat.service popd # install VM tools pushd tools/vm/ install -m755 slabinfo %{buildroot}%{_bindir}/slabinfo install -m755 page_owner_sort %{buildroot}%{_bindir}/page_owner_sort popd %endif if [ -f $DevelDir/vmlinux.h ]; then RPM_VMLINUX_H=$DevelDir/vmlinux.h fi %if %{with_bpftool} pushd tools/bpf/bpftool %{bpftool_make} prefix=%{_prefix} bash_compdir=%{_sysconfdir}/bash_completion.d/ mandir=%{_mandir} install doc-install popd %endif %if %{with_selftests} pushd samples install -d %{buildroot}%{_libexecdir}/ksamples # install bpf samples pushd bpf install -d %{buildroot}%{_libexecdir}/ksamples/bpf find -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/bpf \; install -m755 *.sh %{buildroot}%{_libexecdir}/ksamples/bpf # test_lwt_bpf.sh compiles test_lwt_bpf.c when run; this works only from the # kernel tree. Just remove it. rm %{buildroot}%{_libexecdir}/ksamples/bpf/test_lwt_bpf.sh install -m644 *_kern.o %{buildroot}%{_libexecdir}/ksamples/bpf || true install -m644 tcp_bpf.readme %{buildroot}%{_libexecdir}/ksamples/bpf popd # install pktgen samples pushd pktgen install -d %{buildroot}%{_libexecdir}/ksamples/pktgen find . -type f -executable -exec install -m755 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \; find . -type f ! -executable -exec install -m644 {} %{buildroot}%{_libexecdir}/ksamples/pktgen/{} \; popd popd # install drivers/net/mlxsw selftests pushd tools/testing/selftests/drivers/net/mlxsw find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/mlxsw/{} \; popd # install drivers/net/netdevsim selftests pushd tools/testing/selftests/drivers/net/netdevsim find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/drivers/net/netdevsim/{} \; popd # install net/forwarding selftests pushd tools/testing/selftests/net/forwarding find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/forwarding/{} \; popd # install net/mptcp selftests pushd tools/testing/selftests/net/mptcp find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/net/mptcp/{} \; popd # install tc-testing selftests pushd tools/testing/selftests/tc-testing find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/tc-testing/{} \; popd # install livepatch selftests pushd tools/testing/selftests/livepatch find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/livepatch/{} \; popd # install netfilter selftests pushd tools/testing/selftests/netfilter find -type d -exec install -d %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \; find -type f -executable -exec install -D -m755 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \; find -type f ! -executable -exec install -D -m644 {} %{buildroot}%{_libexecdir}/kselftests/netfilter/{} \; popd %endif ### ### clean ### ### ### scripts ### %if %{with_tools} %post -n kernel-tools-libs /sbin/ldconfig %postun -n kernel-tools-libs /sbin/ldconfig %endif # # This macro defines a %%post script for a kernel*-devel package. # %%kernel_devel_post [] # Note we don't run hardlink if ostree is in use, as ostree is # a far more sophisticated hardlink implementation. # https://github.com/projectatomic/rpm-ostree/commit/58a79056a889be8814aa51f507b2c7a4dccee526 # %define kernel_devel_post() \ %{expand:%%post %{?1:%{1}-}devel}\ if [ -f /etc/sysconfig/kernel ]\ then\ . /etc/sysconfig/kernel || exit $?\ fi\ if [ "$HARDLINK" != "no" -a -x /usr/bin/hardlink -a ! -e /run/ostree-booted ] \ then\ (cd /usr/src/kernels/%{KVERREL}%{?1:+%{1}} &&\ /usr/bin/find . -type f | while read f; do\ hardlink -c /usr/src/kernels/*%{?dist}.*/$f $f > /dev/null\ done)\ fi\ %{nil} # # This macro defines a %%post script for a kernel*-modules-extra package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_extra_post [] # %define kernel_modules_extra_post() \ %{expand:%%post %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-extra}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules-internal package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_internal_post [] # %define kernel_modules_internal_post() \ %{expand:%%post %{?1:%{1}-}modules-internal}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules-internal}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # # This macro defines a %%post script for a kernel*-modules package. # It also defines a %%postun script that does the same thing. # %%kernel_modules_post [] # %define kernel_modules_post() \ %{expand:%%post %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil}\ %{expand:%%postun %{?1:%{1}-}modules}\ /sbin/depmod -a %{KVERREL}%{?1:+%{1}}\ %{nil} # This macro defines a %%posttrans script for a kernel package. # %%kernel_variant_posttrans [] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_posttrans() \ %{expand:%%posttrans %{?1:%{1}-}core}\ %if 0%{!?fedora:1}\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --add-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ %endif\ /bin/kernel-install add %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ %{nil} # # This macro defines a %%post script for a kernel package and its devel package. # %%kernel_variant_post [-v ] [-r ] # More text can follow to go at the end of this variant's %%post. # %define kernel_variant_post(v:r:) \ %{expand:%%kernel_devel_post %{?-v*}}\ %{expand:%%kernel_modules_post %{?-v*}}\ %{expand:%%kernel_modules_extra_post %{?-v*}}\ %{expand:%%kernel_modules_internal_post %{?-v*}}\ %{expand:%%kernel_variant_posttrans %{?-v*}}\ %{expand:%%post %{?-v*:%{-v*}-}core}\ %{-r:\ if [ `uname -i` == "x86_64" -o `uname -i` == "i386" ] &&\ [ -f /etc/sysconfig/kernel ]; then\ /bin/sed -r -i -e 's/^DEFAULTKERNEL=%{-r*}$/DEFAULTKERNEL=kernel%{?-v:-%{-v*}}/' /etc/sysconfig/kernel || exit $?\ fi}\ %{nil} # # This macro defines a %%preun script for a kernel package. # %%kernel_variant_preun # %define kernel_variant_preun() \ %{expand:%%preun %{?1:%{1}-}core}\ /bin/kernel-install remove %{KVERREL}%{?1:+%{1}} /lib/modules/%{KVERREL}%{?1:+%{1}}/vmlinuz || exit $?\ if [ -x %{_sbindir}/weak-modules ]\ then\ %{_sbindir}/weak-modules --remove-kernel %{KVERREL}%{?1:+%{1}} || exit $?\ fi\ %{nil} %kernel_variant_preun %kernel_variant_post -r kernel-smp %if %{with_pae} %kernel_variant_preun lpae %kernel_variant_post -v lpae -r (kernel|kernel-smp) %endif %if %{with_debug} %kernel_variant_preun debug %kernel_variant_post -v debug %endif %if %{with_zfcpdump} %kernel_variant_preun zfcpdump %kernel_variant_post -v zfcpdump %endif if [ -x /sbin/ldconfig ] then /sbin/ldconfig -X || exit $? fi ### ### file lists ### %if %{with_headers} %files headers /usr/include/* %endif %if %{with_cross_headers} %files cross-headers /usr/*-linux-gnu/include/* %endif %if %{with_kernel_abi_stablelists} %files -n kernel-abi-stablelists /lib/modules/kabi-* %endif %if %{with_kabidw_base} %ifarch x86_64 s390x ppc64 ppc64le aarch64 %files kernel-kabidw-base-internal %defattr(-,root,root) /kabidw-base/%{_target_cpu}/* %endif %endif # only some architecture builds need kernel-doc %if %{with_doc} %files doc %defattr(-,root,root) %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}/Documentation/* %dir %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease}/Documentation %dir %{_datadir}/doc/kernel-doc-%{rpmversion}-%{pkgrelease} %endif %if %{with_perf} %files -n perf %{_bindir}/perf %{_libdir}/libperf-jvmti.so %dir %{_libexecdir}/perf-core %{_libexecdir}/perf-core/* %{_datadir}/perf-core/* %{_mandir}/man[1-8]/perf* %{_sysconfdir}/bash_completion.d/perf %doc linux-%{KVERREL}/tools/perf/Documentation/examples.txt %{_docdir}/perf-tip/tips.txt %files -n python3-perf %{python3_sitearch}/* %if %{with_debuginfo} %files -f perf-debuginfo.list -n perf-debuginfo %files -f python3-perf-debuginfo.list -n python3-perf-debuginfo %endif # with_perf %endif %if %{with_tools} %ifnarch %{cpupowerarchs} %files -n kernel-tools %else %files -n kernel-tools -f cpupower.lang %{_bindir}/cpupower %{_datadir}/bash-completion/completions/cpupower %ifarch x86_64 %{_bindir}/centrino-decode %{_bindir}/powernow-k8-decode %endif %{_unitdir}/cpupower.service %{_mandir}/man[1-8]/cpupower* %config(noreplace) %{_sysconfdir}/sysconfig/cpupower %ifarch x86_64 %{_bindir}/x86_energy_perf_policy %{_mandir}/man8/x86_energy_perf_policy* %{_bindir}/turbostat %{_mandir}/man8/turbostat* %{_bindir}/intel-speed-select %endif # cpupowerarchs %endif %{_bindir}/tmon %{_bindir}/iio_event_monitor %{_bindir}/iio_generic_buffer %{_bindir}/lsiio %{_bindir}/lsgpio %{_bindir}/gpio-hammer %{_bindir}/gpio-event-mon %{_bindir}/gpio-watch %{_mandir}/man1/kvm_stat* %{_bindir}/kvm_stat %{_unitdir}/kvm_stat.service %config(noreplace) %{_sysconfdir}/logrotate.d/kvm_stat %{_bindir}/page_owner_sort %{_bindir}/slabinfo %if %{with_debuginfo} %files -f kernel-tools-debuginfo.list -n kernel-tools-debuginfo %endif %ifarch %{cpupowerarchs} %files -n kernel-tools-libs %{_libdir}/libcpupower.so.0 %{_libdir}/libcpupower.so.0.0.1 %files -n kernel-tools-libs-devel %{_libdir}/libcpupower.so %{_includedir}/cpufreq.h %endif # with_tools %endif %if %{with_bpftool} %files -n bpftool %{_sbindir}/bpftool %{_sysconfdir}/bash_completion.d/bpftool %{_mandir}/man8/bpftool-cgroup.8.gz %{_mandir}/man8/bpftool-gen.8.gz %{_mandir}/man8/bpftool-iter.8.gz %{_mandir}/man8/bpftool-link.8.gz %{_mandir}/man8/bpftool-map.8.gz %{_mandir}/man8/bpftool-prog.8.gz %{_mandir}/man8/bpftool-perf.8.gz %{_mandir}/man8/bpftool.8.gz %{_mandir}/man8/bpftool-net.8.gz %{_mandir}/man8/bpftool-feature.8.gz %{_mandir}/man8/bpftool-btf.8.gz %{_mandir}/man8/bpftool-struct_ops.8.gz %if %{with_debuginfo} %files -f bpftool-debuginfo.list -n bpftool-debuginfo %defattr(-,root,root) %endif %endif %if %{with_selftests} %files selftests-internal %{_libexecdir}/ksamples %{_libexecdir}/kselftests %endif # empty meta-package %ifnarch %nobuildarches noarch %files %endif %if %{with_gcov} %ifarch x86_64 s390x ppc64le aarch64 %files gcov %{_builddir} %endif %endif # This is %%{image_install_path} on an arch where that includes ELF files, # or empty otherwise. %define elf_image_install_path %{?kernel_image_elf:%{image_install_path}} # # This macro defines the %%files sections for a kernel package # and its devel and debuginfo packages. # %%kernel_variant_files [-k vmlinux] # %define kernel_variant_files(k:) \ %if %{2}\ %{expand:%%files -f kernel-%{?3:%{3}-}core.list %{?1:-f kernel-%{?3:%{3}-}ldsoconf.list} %{?3:%{3}-}core}\ %{!?_licensedir:%global license %%doc}\ %license linux-%{KVERREL}/COPYING-%{version}-%{release}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/%{?-k:%{-k*}}%{!?-k:vmlinuz}\ %ghost /%{image_install_path}/%{?-k:%{-k*}}%{!?-k:vmlinuz}-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/.vmlinuz.hmac \ %ghost /%{image_install_path}/.vmlinuz-%{KVERREL}%{?3:+%{3}}.hmac \ %ifarch %{arm} aarch64\ /lib/modules/%{KVERREL}%{?3:+%{3}}/dtb \ %ghost /%{image_install_path}/dtb-%{KVERREL}%{?3:+%{3}} \ %endif\ %attr(0600, root, root) /lib/modules/%{KVERREL}%{?3:+%{3}}/System.map\ %ghost %attr(0600, root, root) /boot/System.map-%{KVERREL}%{?3:+%{3}}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/symvers.gz\ /lib/modules/%{KVERREL}%{?3:+%{3}}/config\ %ghost %attr(0600, root, root) /boot/symvers-%{KVERREL}%{?3:+%{3}}.gz\ %ghost %attr(0600, root, root) /boot/initramfs-%{KVERREL}%{?3:+%{3}}.img\ %ghost %attr(0644, root, root) /boot/config-%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}\ %dir /lib/modules/%{KVERREL}%{?3:+%{3}}/kernel\ /lib/modules/%{KVERREL}%{?3:+%{3}}/build\ /lib/modules/%{KVERREL}%{?3:+%{3}}/source\ /lib/modules/%{KVERREL}%{?3:+%{3}}/updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/weak-updates\ /lib/modules/%{KVERREL}%{?3:+%{3}}/crashkernel.default\ %{_datadir}/doc/kernel-keys/%{KVERREL}%{?3:+%{3}}\ %if %{1}\ /lib/modules/%{KVERREL}%{?3:+%{3}}/vdso\ %endif\ /lib/modules/%{KVERREL}%{?3:+%{3}}/modules.*\ %{expand:%%files -f kernel-%{?3:%{3}-}modules.list %{?3:%{3}-}modules}\ %{expand:%%files %{?3:%{3}-}devel}\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?3:+%{3}}\ %{expand:%%files %{?3:%{3}-}devel-matched}\ %{expand:%%files -f kernel-%{?3:%{3}-}modules-extra.list %{?3:%{3}-}modules-extra}\ %config(noreplace) /etc/modprobe.d/*-blacklist.conf\ %{expand:%%files -f kernel-%{?3:%{3}-}modules-internal.list %{?3:%{3}-}modules-internal}\ %if %{with_debuginfo}\ %ifnarch noarch\ %{expand:%%files -f debuginfo%{?3}.list %{?3:%{3}-}debuginfo}\ %endif\ %endif\ %if %{?3:1} %{!?3:0}\ %{expand:%%files %{3}}\ %endif\ %endif\ %{nil} %kernel_variant_files %{_use_vdso} %{with_up} %kernel_variant_files %{_use_vdso} %{with_debug} debug %if %{with_debug_meta} %files debug %files debug-core %files debug-devel %files debug-devel-matched %files debug-modules %files debug-modules-extra %endif %kernel_variant_files %{use_vdso} %{with_pae} lpae %kernel_variant_files %{_use_vdso} %{with_zfcpdump} zfcpdump %define kernel_variant_ipaclones(k:) \ %if %{1}\ %if %{with_ipaclones}\ %{expand:%%files %{?2:%{2}-}ipaclones-internal}\ %defattr(-,root,root)\ %defverify(not mtime)\ /usr/src/kernels/%{KVERREL}%{?2:+%{2}}-ipaclones\ %endif\ %endif\ %{nil} %kernel_variant_ipaclones %{with_up} # plz don't put in a version string unless you're going to tag # and build. # # %changelog * Thu Sep 23 2021 Fedora Kernel Team [5.15-0.rc2.20210923git58e2cf5d7946.21] - redhat/configs: enable CONFIG_SQUASHFS_ZSTD which is already enabled in Fedora 34 (Tao Liu) [1998953] * Sat Sep 18 2021 Fedora Kernel Team [5.15-0.rc1.20210918git4357f03d6611.16] - redhat: bump RHEL_MAJOR and add the changelog file for it (Herton R. Krzesinski) - redhat: add documentation about the os-build rebase process (Herton R. Krzesinski) # The following bit is important for automation so please do not remove # END OF CHANGELOG ### # The following Emacs magic makes C-c C-e use UTC dates. # Local Variables: # rpm-change-log-uses-utc: t # End: ###