From patchwork Wed Jul 25 12:29:07 2018 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: drm/vc4: Fix the "no scaling" case on multi-planar YUV formats From: Boris Brezillon X-Patchwork-Id: 240917 Message-Id: <20180725122907.13702-1-boris.brezillon@bootlin.com> To: Eric Anholt Cc: David Airlie , Boris Brezillon , stable@vger.kernel.org, dri-devel@lists.freedesktop.org Date: Wed, 25 Jul 2018 14:29:07 +0200 When there's no scaling requested ->is_unity should be true no matter the format. Also, when no scaling is requested and we have a multi-planar YUV format, we should leave ->y_scaling[0] to VC4_SCALING_NONE and only set ->x_scaling[0] to VC4_SCALING_PPF. Doing this fixes an hardly visible artifact (seen when using modetest and a rather big overlay plane in YUV420). Fixes: fc04023fafec ("drm/vc4: Add support for YUV planes.") Cc: Signed-off-by: Boris Brezillon Reviewed-by: Eric Anholt --- drivers/gpu/drm/vc4/vc4_plane.c | 25 ++++++++++++------------- 1 file changed, 12 insertions(+), 13 deletions(-) diff --git a/drivers/gpu/drm/vc4/vc4_plane.c b/drivers/gpu/drm/vc4/vc4_plane.c index cfb50fedfa2b..a3275fa66b7b 100644 --- a/drivers/gpu/drm/vc4/vc4_plane.c +++ b/drivers/gpu/drm/vc4/vc4_plane.c @@ -297,6 +297,9 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_state->y_scaling[0] = vc4_get_scaling_mode(vc4_state->src_h[0], vc4_state->crtc_h); + vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && + vc4_state->y_scaling[0] == VC4_SCALING_NONE); + if (num_planes > 1) { vc4_state->is_yuv = true; @@ -312,24 +315,17 @@ static int vc4_plane_setup_clipping_and_scaling(struct drm_plane_state *state) vc4_get_scaling_mode(vc4_state->src_h[1], vc4_state->crtc_h); - /* YUV conversion requires that scaling be enabled, - * even on a plane that's otherwise 1:1. Choose TPZ - * for simplicity. + /* YUV conversion requires that horizontal scaling be enabled, + * even on a plane that's otherwise 1:1. Looks like only PPF + * works in that case, so let's pick that one. */ - if (vc4_state->x_scaling[0] == VC4_SCALING_NONE) - vc4_state->x_scaling[0] = VC4_SCALING_TPZ; - if (vc4_state->y_scaling[0] == VC4_SCALING_NONE) - vc4_state->y_scaling[0] = VC4_SCALING_TPZ; + if (vc4_state->is_unity) + vc4_state->x_scaling[0] = VC4_SCALING_PPF; } else { vc4_state->x_scaling[1] = VC4_SCALING_NONE; vc4_state->y_scaling[1] = VC4_SCALING_NONE; } - vc4_state->is_unity = (vc4_state->x_scaling[0] == VC4_SCALING_NONE && - vc4_state->y_scaling[0] == VC4_SCALING_NONE && - vc4_state->x_scaling[1] == VC4_SCALING_NONE && - vc4_state->y_scaling[1] == VC4_SCALING_NONE); - /* No configuring scaling on the cursor plane, since it gets non-vblank-synced updates, and scaling requires requires LBM changes which have to be vblank-synced. @@ -672,7 +668,10 @@ static int vc4_plane_mode_set(struct drm_plane *plane, vc4_dlist_write(vc4_state, SCALER_CSC2_ITR_R_601_5); } - if (!vc4_state->is_unity) { + if (vc4_state->x_scaling[0] != VC4_SCALING_NONE || + vc4_state->x_scaling[1] != VC4_SCALING_NONE || + vc4_state->y_scaling[0] != VC4_SCALING_NONE || + vc4_state->y_scaling[1] != VC4_SCALING_NONE) { /* LBM Base Address. */ if (vc4_state->y_scaling[0] != VC4_SCALING_NONE || vc4_state->y_scaling[1] != VC4_SCALING_NONE) {