From patchwork Mon May 1 12:45:01 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5, 01/20] net: stmmac: export stmmac_set_mac_addr/stmmac_get_mac_addr From: Corentin LABBE X-Patchwork-Id: 9706455 Message-Id: <20170501124520.3769-2-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:01 +0200 Thoses symbol will be needed for the dwmac-sun8i ethernet driver. For letting it to be build as module, they need to be exported. Signed-off-by: Corentin Labbe --- drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c index 38f9430..67af0bd 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac_lib.c @@ -248,6 +248,7 @@ void stmmac_set_mac_addr(void __iomem *ioaddr, u8 addr[6], data = (addr[3] << 24) | (addr[2] << 16) | (addr[1] << 8) | addr[0]; writel(data, ioaddr + low); } +EXPORT_SYMBOL_GPL(stmmac_set_mac_addr); /* Enable disable MAC RX/TX */ void stmmac_set_mac(void __iomem *ioaddr, bool enable) @@ -279,4 +280,4 @@ void stmmac_get_mac_addr(void __iomem *ioaddr, unsigned char *addr, addr[4] = hi_addr & 0xff; addr[5] = (hi_addr >> 8) & 0xff; } - +EXPORT_SYMBOL_GPL(stmmac_get_mac_addr); From patchwork Mon May 1 12:45:02 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5,02/20] net: stmmac: add optional setup function From: Corentin LABBE X-Patchwork-Id: 9706501 Message-Id: <20170501124520.3769-3-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:02 +0200 Instead of adding more ifthen logic for adding a new mac_device_info setup function, it is easier to add a function pointer to the function needed. Signed-off-by: Corentin Labbe --- drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 4 +++- include/linux/stmmac.h | 1 + 2 files changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index cd8c601..b82ab64 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -3947,7 +3947,9 @@ static int stmmac_hw_init(struct stmmac_priv *priv) struct mac_device_info *mac; /* Identify the MAC HW device */ - if (priv->plat->has_gmac) { + if (priv->plat->setup) { + mac = priv->plat->setup(priv); + } else if (priv->plat->has_gmac) { priv->dev->priv_flags |= IFF_UNICAST_FLT; mac = dwmac1000_setup(priv->ioaddr, priv->plat->multicast_filter_bins, diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 3921cb9..8bb550b 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -177,6 +177,7 @@ struct plat_stmmacenet_data { void (*fix_mac_speed)(void *priv, unsigned int speed); int (*init)(struct platform_device *pdev, void *priv); void (*exit)(struct platform_device *pdev, void *priv); + struct mac_device_info *(*setup)(void *priv); void *bsp_priv; struct clk *stmmac_clk; struct clk *pclk; From patchwork Mon May 1 12:45:03 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5, 03/20] dt-bindings: net: Add DT bindings documentation for Allwinner dwmac-sun8i From: Corentin LABBE X-Patchwork-Id: 9706457 Message-Id: <20170501124520.3769-4-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:03 +0200 This patch adds documentation for Device-Tree bindings for the Allwinner dwmac-sun8i driver. Signed-off-by: Corentin Labbe Acked-by: Rob Herring --- .../devicetree/bindings/net/dwmac-sun8i.txt | 77 ++++++++++++++++++++++ 1 file changed, 77 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/dwmac-sun8i.txt diff --git a/Documentation/devicetree/bindings/net/dwmac-sun8i.txt b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt new file mode 100644 index 0000000..05cd067 --- /dev/null +++ b/Documentation/devicetree/bindings/net/dwmac-sun8i.txt @@ -0,0 +1,77 @@ +* Allwinner sun8i GMAC ethernet controller + +This device is a platform glue layer for stmmac. +Please see stmmac.txt for the other unchanged properties. + +Required properties: +- compatible: should be one of the following string: + "allwinner,sun8i-a83t-emac" + "allwinner,sun8i-h3-emac" + "allwinner,sun50i-a64-emac" +- reg: address and length of the register for the device. +- interrupts: interrupt for the device +- interrupt-names: should be "macirq" +- clocks: A phandle to the reference clock for this device +- clock-names: should be "stmmaceth" +- resets: A phandle to the reset control for this device +- reset-names: should be "stmmaceth" +- phy-mode: See ethernet.txt +- phy-handle: See ethernet.txt +- #address-cells: shall be 1 +- #size-cells: shall be 0 +- syscon: A phandle to the syscon of the SoC with one of the following + compatible string: + - allwinner,sun8i-h3-system-controller + - allwinner,sun50i-a64-system-controller + - allwinner,sun8i-a83t-system-controller + +Optional properties: +- allwinner,tx-delay-ps: TX clock delay chain value in ps. Range value is 0-700. Default is 0) +- allwinner,rx-delay-ps: RX clock delay chain value in ps. Range value is 0-3100. Default is 0) +Both delay properties need to be a multiple of 100. + +Optional properties for "allwinner,sun8i-h3-emac": +- allwinner,leds-active-low: EPHY LEDs are active low + +Required child node of emac: +- mdio bus node: should be named mdio + +Required properties of the mdio node: +- #address-cells: shall be 1 +- #size-cells: shall be 0 + +The device node referenced by "phy" or "phy-handle" should be a child node +of the mdio node. See phy.txt for the generic PHY bindings. + +Required properties of the phy node with "allwinner,sun8i-h3-emac": +- clocks: a phandle to the reference clock for the EPHY +- resets: a phandle to the reset control for the EPHY + +Example: + +emac: ethernet@1c0b000 { + compatible = "allwinner,sun8i-h3-emac"; + syscon = <&syscon>; + reg = <0x01c0b000 0x104>; + interrupts = ; + interrupt-names = "macirq"; + resets = <&ccu RST_BUS_EMAC>; + reset-names = "stmmaceth"; + clocks = <&ccu CLK_BUS_EMAC>; + clock-names = "stmmaceth"; + #address-cells = <1>; + #size-cells = <0>; + + phy = <&int_mii_phy>; + phy-mode = "mii"; + allwinner,leds-active-low; + mdio: mdio { + #address-cells = <1>; + #size-cells = <0>; + int_mii_phy: ethernet-phy@1 { + reg = <1>; + clocks = <&ccu CLK_BUS_EPHY>; + resets = <&ccu RST_BUS_EPHY>; + }; + }; +}; From patchwork Mon May 1 12:45:04 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5, 04/20] dt-bindings: syscon: Add DT bindings documentation for Allwinner syscon From: Corentin LABBE X-Patchwork-Id: 9706469 Message-Id: <20170501124520.3769-5-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:04 +0200 This patch adds documentation for Device-Tree bindings for the syscon present in allwinner devices. Signed-off-by: Corentin Labbe --- .../devicetree/bindings/misc/allwinner,syscon.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/misc/allwinner,syscon.txt diff --git a/Documentation/devicetree/bindings/misc/allwinner,syscon.txt b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt new file mode 100644 index 0000000..cb57691 --- /dev/null +++ b/Documentation/devicetree/bindings/misc/allwinner,syscon.txt @@ -0,0 +1,19 @@ +* Allwinner sun8i system controller + +This file describes the bindings for the system controller present in +Allwinner SoC H3, A83T and A64. +The principal function of this syscon is to control EMAC PHY choice and +config. + +Required properties for the system controller: +- reg: address and length of the register for the device. +- compatible: should be "syscon" and one of the following string: + "allwinner,sun8i-h3-system-controller" + "allwinner,sun50i-a64-system-controller" + "allwinner,sun8i-a83t-system-controller" + +Example: +syscon: syscon@1c00000 { + compatible = "allwinner,sun8i-h3-system-controller", "syscon"; + reg = <0x01c00000 0x1000>; +}; From patchwork Mon May 1 12:45:05 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5,05/20] net: stmmac: Add dwmac-sun8i From: Corentin LABBE X-Patchwork-Id: 9706473 Message-Id: <20170501124520.3769-6-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:05 +0200 The dwmac-sun8i is a heavy hacked version of stmmac hardware by allwinner. In fact the only common part is the descriptor management and the first register function. Signed-off-by: Corentin Labbe --- drivers/net/ethernet/stmicro/stmmac/Kconfig | 11 + drivers/net/ethernet/stmicro/stmmac/Makefile | 1 + drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 973 +++++++++++++++++++++ drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 29 + .../net/ethernet/stmicro/stmmac/stmmac_platform.c | 9 +- include/linux/stmmac.h | 1 + 6 files changed, 1022 insertions(+), 2 deletions(-) create mode 100644 drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig index cfbe363..85c0e41 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Kconfig +++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig @@ -145,6 +145,17 @@ config DWMAC_SUNXI This selects Allwinner SoC glue layer support for the stmmac device driver. This driver is used for A20/A31 GMAC ethernet controller. + +config DWMAC_SUN8I + tristate "Allwinner sun8i GMAC support" + default ARCH_SUNXI + depends on OF && (ARCH_SUNXI || COMPILE_TEST) + ---help--- + Support for Allwinner H3 A83T A64 EMAC ethernet controllers. + + This selects Allwinner SoC glue layer support for the + stmmac device driver. This driver is used for H3/A83T/A64 + EMAC ethernet controller. endif config STMMAC_PCI diff --git a/drivers/net/ethernet/stmicro/stmmac/Makefile b/drivers/net/ethernet/stmicro/stmmac/Makefile index 700c603..fd4937a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/Makefile +++ b/drivers/net/ethernet/stmicro/stmmac/Makefile @@ -16,6 +16,7 @@ obj-$(CONFIG_DWMAC_SOCFPGA) += dwmac-altr-socfpga.o obj-$(CONFIG_DWMAC_STI) += dwmac-sti.o obj-$(CONFIG_DWMAC_STM32) += dwmac-stm32.o obj-$(CONFIG_DWMAC_SUNXI) += dwmac-sunxi.o +obj-$(CONFIG_DWMAC_SUN8I) += dwmac-sun8i.o obj-$(CONFIG_DWMAC_DWC_QOS_ETH) += dwmac-dwc-qos-eth.o obj-$(CONFIG_DWMAC_GENERIC) += dwmac-generic.o stmmac-platform-objs:= stmmac_platform.o diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c new file mode 100644 index 0000000..66eb980 --- /dev/null +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-sun8i.c @@ -0,0 +1,973 @@ +/* + * dwmac-sun8i.c - Allwinner sun8i DWMAC specific glue layer + * + * Copyright (C) 2017 Corentin Labbe + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "stmmac.h" +#include "stmmac_platform.h" + +/* General notes on dwmac-sun8i: + * Locking: no locking is necessary in this file because all necessary locking + * is done in the "stmmac files" + */ + +/* struct emac_variant - Descrive dwmac-sun8i hardware variant + * @default_syscon_value: The default value of the EMAC register in syscon + * This value is used for disabling properly EMAC + * and used as a good starting value in case of the + * boot process(uboot) leave some stuff. + * @internal_phy: Does the MAC embed an internal PHY + * @support_mii: Does the MAC handle MII + * @support_rmii: Does the MAC handle RMII + * @support_rgmii: Does the MAC handle RGMII + */ +struct emac_variant { + u32 default_syscon_value; + int internal_phy; + bool support_mii; + bool support_rmii; + bool support_rgmii; +}; + +/* struct sunxi_priv_data - hold all sunxi private data + * @tx_clk: reference to MAC TX clock + * @ephy_clk: reference to the optional EPHY clock for the internal PHY + * @regulator: reference to the optional regulator + * @rst_ephy: reference to the optional EPHY reset for the internal PHY + * @variant: reference to the current board variant + * @regmap: regmap for using the syscon + * @use_internal_phy: Does the current PHY choice imply using the internal PHY + */ +struct sunxi_priv_data { + struct clk *tx_clk; + struct clk *ephy_clk; + struct regulator *regulator; + struct reset_control *rst_ephy; + const struct emac_variant *variant; + struct regmap *regmap; + bool use_internal_phy; +}; + +static const struct emac_variant emac_variant_h3 = { + .default_syscon_value = 0x58000, + .internal_phy = PHY_INTERFACE_MODE_MII, + .support_mii = true, + .support_rmii = true, + .support_rgmii = true +}; + +static const struct emac_variant emac_variant_a83t = { + .default_syscon_value = 0, + .internal_phy = 0, + .support_mii = true, + .support_rgmii = true +}; + +static const struct emac_variant emac_variant_a64 = { + .default_syscon_value = 0, + .internal_phy = 0, + .support_mii = true, + .support_rmii = true, + .support_rgmii = true +}; + +#define EMAC_BASIC_CTL0 0x00 +#define EMAC_BASIC_CTL1 0x04 +#define EMAC_INT_STA 0x08 +#define EMAC_INT_EN 0x0C +#define EMAC_TX_CTL0 0x10 +#define EMAC_TX_CTL1 0x14 +#define EMAC_TX_FLOW_CTL 0x1C +#define EMAC_TX_DESC_LIST 0x20 +#define EMAC_RX_CTL0 0x24 +#define EMAC_RX_CTL1 0x28 +#define EMAC_RX_DESC_LIST 0x34 +#define EMAC_RX_FRM_FLT 0x38 +#define EMAC_MDIO_CMD 0x48 +#define EMAC_MDIO_DATA 0x4C +#define EMAC_MACADDR_HI(reg) (0x50 + (reg) * 8) +#define EMAC_MACADDR_LO(reg) (0x54 + (reg) * 8) +#define EMAC_TX_DMA_STA 0xB0 +#define EMAC_TX_CUR_DESC 0xB4 +#define EMAC_TX_CUR_BUF 0xB8 +#define EMAC_RX_DMA_STA 0xC0 +#define EMAC_RX_CUR_DESC 0xC4 +#define EMAC_RX_CUR_BUF 0xC8 + +/* Use in EMAC_BASIC_CTL1 */ +#define EMAC_BURSTLEN_SHIFT 24 + +/* Used in EMAC_RX_FRM_FLT */ +#define EMAC_FRM_FLT_RXALL BIT(0) +#define EMAC_FRM_FLT_CTL BIT(13) +#define EMAC_FRM_FLT_MULTICAST BIT(16) + +/* Used in RX_CTL1*/ +#define EMAC_RX_MD BIT(1) +#define EMAC_RX_TH_MASK GENMASK(4, 5) +#define EMAC_RX_TH_32 0 +#define EMAC_RX_TH_64 (0x1 << 4) +#define EMAC_RX_TH_96 (0x2 << 4) +#define EMAC_RX_TH_128 (0x3 << 4) +#define EMAC_RX_DMA_EN BIT(30) +#define EMAC_RX_DMA_START BIT(31) + +/* Used in TX_CTL1*/ +#define EMAC_TX_MD BIT(1) +#define EMAC_TX_NEXT_FRM BIT(2) +#define EMAC_TX_TH_MASK GENMASK(8, 10) +#define EMAC_TX_TH_64 0 +#define EMAC_TX_TH_128 (0x1 << 8) +#define EMAC_TX_TH_192 (0x2 << 8) +#define EMAC_TX_TH_256 (0x3 << 8) +#define EMAC_TX_DMA_EN BIT(30) +#define EMAC_TX_DMA_START BIT(31) + +/* Used in RX_CTL0 */ +#define EMAC_RX_RECEIVER_EN BIT(31) +#define EMAC_RX_DO_CRC BIT(27) +#define EMAC_RX_FLOW_CTL_EN BIT(16) + +/* Used in TX_CTL0 */ +#define EMAC_TX_TRANSMITTER_EN BIT(31) + +/* Used in EMAC_TX_FLOW_CTL */ +#define EMAC_TX_FLOW_CTL_EN BIT(0) + +/* Used in EMAC_INT_STA */ +#define EMAC_TX_INT BIT(0) +#define EMAC_TX_DMA_STOP_INT BIT(1) +#define EMAC_TX_BUF_UA_INT BIT(2) +#define EMAC_TX_TIMEOUT_INT BIT(3) +#define EMAC_TX_UNDERFLOW_INT BIT(4) +#define EMAC_TX_EARLY_INT BIT(5) +#define EMAC_RX_INT BIT(8) +#define EMAC_RX_BUF_UA_INT BIT(9) +#define EMAC_RX_DMA_STOP_INT BIT(10) +#define EMAC_RX_TIMEOUT_INT BIT(11) +#define EMAC_RX_OVERFLOW_INT BIT(12) +#define EMAC_RX_EARLY_INT BIT(13) +#define EMAC_RGMII_STA_INT BIT(16) + +#define MAC_ADDR_TYPE_DST BIT(31) + +/* H3 specific bits for EPHY */ +#define H3_EPHY_ADDR_SHIFT 20 +#define H3_EPHY_LED_POL BIT(17) /* 1: active low, 0: active high */ +#define H3_EPHY_SHUTDOWN BIT(16) /* 1: shutdown, 0: power up */ +#define H3_EPHY_SELECT BIT(15) /* 1: internal PHY, 0: external PHY */ + +/* H3/A64 specific bits */ +#define SYSCON_RMII_EN BIT(13) /* 1: enable RMII (overrides EPIT) */ + +/* Generic system control EMAC_CLK bits */ +#define SYSCON_ETXDC_MASK GENMASK(2, 0) +#define SYSCON_ETXDC_SHIFT 10 +#define SYSCON_ERXDC_MASK GENMASK(4, 0) +#define SYSCON_ERXDC_SHIFT 5 +/* EMAC PHY Interface Type */ +#define SYSCON_EPIT BIT(2) /* 1: RGMII, 0: MII */ +#define SYSCON_ETCS_MASK GENMASK(1, 0) +#define SYSCON_ETCS_MII 0x0 +#define SYSCON_ETCS_EXT_GMII 0x1 +#define SYSCON_ETCS_INT_GMII 0x2 +#define SYSCON_EMAC_REG 0x30 + +/* sun8i_dwmac_dma_reset() - reset the EMAC + * Called from stmmac via stmmac_dma_ops->reset + */ +static int sun8i_dwmac_dma_reset(void __iomem *ioaddr) +{ + writel(0, ioaddr + EMAC_RX_CTL1); + writel(0, ioaddr + EMAC_TX_CTL1); + writel(0, ioaddr + EMAC_RX_FRM_FLT); + writel(0, ioaddr + EMAC_RX_DESC_LIST); + writel(0, ioaddr + EMAC_TX_DESC_LIST); + writel(0, ioaddr + EMAC_INT_EN); + writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); + return 0; +} + +/* sun8i_dwmac_dma_init() - initialize the EMAC + * Called from stmmac via stmmac_dma_ops->init + */ +static void sun8i_dwmac_dma_init(void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 dma_tx, u32 dma_rx, int atds) +{ + /* Write TX and RX descriptors address */ + writel(dma_rx, ioaddr + EMAC_RX_DESC_LIST); + writel(dma_tx, ioaddr + EMAC_TX_DESC_LIST); + + writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); + writel(0x1FFFFFF, ioaddr + EMAC_INT_STA); +} + +/* sun8i_dwmac_dump_regs() - Dump EMAC address space + * Called from stmmac_dma_ops->dump_regs + * Used for ethtool + */ +static void sun8i_dwmac_dump_regs(void __iomem *ioaddr, u32 *reg_space) +{ + int i; + + for (i = 0; i < 0xC8; i += 4) { + if (i == 0x32 || i == 0x3C) + continue; + reg_space[i / 4] = readl(ioaddr + i); + } +} + +/* sun8i_dwmac_dump_mac_regs() - Dump EMAC address space + * Called from stmmac_ops->dump_regs + * Used for ethtool + */ +static void sun8i_dwmac_dump_mac_regs(struct mac_device_info *hw, + u32 *reg_space) +{ + int i; + void __iomem *ioaddr = hw->pcsr; + + for (i = 0; i < 0xC8; i += 4) { + if (i == 0x32 || i == 0x3C) + continue; + reg_space[i / 4] = readl(ioaddr + i); + } +} + +static void sun8i_dwmac_enable_dma_irq(void __iomem *ioaddr, u32 chan) +{ + writel(EMAC_RX_INT | EMAC_TX_INT, ioaddr + EMAC_INT_EN); +} + +static void sun8i_dwmac_disable_dma_irq(void __iomem *ioaddr, u32 chan) +{ + writel(0, ioaddr + EMAC_INT_EN); +} + +static void sun8i_dwmac_dma_start_tx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + v |= EMAC_TX_DMA_START; + v |= EMAC_TX_DMA_EN; + writel(v, ioaddr + EMAC_TX_CTL1); +} + +static void sun8i_dwmac_enable_dma_transmission(void __iomem *ioaddr) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + v |= EMAC_TX_DMA_START; + v |= EMAC_TX_DMA_EN; + writel(v, ioaddr + EMAC_TX_CTL1); +} + +static void sun8i_dwmac_dma_stop_tx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + v &= ~EMAC_TX_DMA_EN; + writel(v, ioaddr + EMAC_TX_CTL1); +} + +static void sun8i_dwmac_dma_start_rx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL1); + v |= EMAC_RX_DMA_START; + v |= EMAC_RX_DMA_EN; + writel(v, ioaddr + EMAC_RX_CTL1); +} + +static void sun8i_dwmac_dma_stop_rx(void __iomem *ioaddr, u32 chan) +{ + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL1); + v &= ~EMAC_RX_DMA_EN; + writel(v, ioaddr + EMAC_RX_CTL1); +} + +static int sun8i_dwmac_dma_interrupt(void __iomem *ioaddr, + struct stmmac_extra_stats *x, u32 chan) +{ + u32 v; + int ret = 0; + + v = readl(ioaddr + EMAC_INT_STA); + + if (v & EMAC_TX_INT) { + ret |= handle_tx; + x->tx_normal_irq_n++; + } + + if (v & EMAC_TX_DMA_STOP_INT) + x->tx_process_stopped_irq++; + + if (v & EMAC_TX_BUF_UA_INT) + x->tx_process_stopped_irq++; + + if (v & EMAC_TX_TIMEOUT_INT) + ret |= tx_hard_error; + + if (v & EMAC_TX_UNDERFLOW_INT) { + ret |= tx_hard_error; + x->tx_undeflow_irq++; + } + + if (v & EMAC_TX_EARLY_INT) + x->tx_early_irq++; + + if (v & EMAC_RX_INT) { + ret |= handle_rx; + x->rx_normal_irq_n++; + } + + if (v & EMAC_RX_BUF_UA_INT) + x->rx_buf_unav_irq++; + + if (v & EMAC_RX_DMA_STOP_INT) + x->rx_process_stopped_irq++; + + if (v & EMAC_RX_TIMEOUT_INT) + ret |= tx_hard_error; + + if (v & EMAC_RX_OVERFLOW_INT) { + ret |= tx_hard_error; + x->rx_overflow_irq++; + } + + if (v & EMAC_RX_EARLY_INT) + x->rx_early_irq++; + + if (v & EMAC_RGMII_STA_INT) + x->irq_rgmii_n++; + + writel(v, ioaddr + EMAC_INT_STA); + + return ret; +} + +static void sun8i_dwmac_dma_operation_mode(void __iomem *ioaddr, int txmode, + int rxmode, int rxfifosz) +{ + u32 v; + + v = readl(ioaddr + EMAC_TX_CTL1); + if (txmode == SF_DMA_MODE) { + v |= EMAC_TX_MD; + /* Undocumented bit (called TX_NEXT_FRM in BSP), the original + * comment is + * "Operating on second frame increase the performance + * especially when transmit store-and-forward is used." + */ + v |= EMAC_TX_NEXT_FRM; + } else { + v &= ~EMAC_TX_MD; + v &= ~EMAC_TX_TH_MASK; + if (txmode < 64) + v |= EMAC_TX_TH_64; + else if (txmode < 128) + v |= EMAC_TX_TH_128; + else if (txmode < 192) + v |= EMAC_TX_TH_192; + else if (txmode < 256) + v |= EMAC_TX_TH_256; + } + writel(v, ioaddr + EMAC_TX_CTL1); + + v = readl(ioaddr + EMAC_RX_CTL1); + if (rxmode == SF_DMA_MODE) { + v |= EMAC_RX_MD; + } else { + v &= ~EMAC_RX_MD; + v &= ~EMAC_RX_TH_MASK; + if (rxmode < 32) + v |= EMAC_RX_TH_32; + else if (rxmode < 64) + v |= EMAC_RX_TH_64; + else if (rxmode < 96) + v |= EMAC_RX_TH_96; + else if (rxmode < 128) + v |= EMAC_RX_TH_128; + } + writel(v, ioaddr + EMAC_RX_CTL1); +} + +static const struct stmmac_dma_ops sun8i_dwmac_dma_ops = { + .reset = sun8i_dwmac_dma_reset, + .init = sun8i_dwmac_dma_init, + .dump_regs = sun8i_dwmac_dump_regs, + .dma_mode = sun8i_dwmac_dma_operation_mode, + .enable_dma_transmission = sun8i_dwmac_enable_dma_transmission, + .enable_dma_irq = sun8i_dwmac_enable_dma_irq, + .disable_dma_irq = sun8i_dwmac_disable_dma_irq, + .start_tx = sun8i_dwmac_dma_start_tx, + .stop_tx = sun8i_dwmac_dma_stop_tx, + .start_rx = sun8i_dwmac_dma_start_rx, + .stop_rx = sun8i_dwmac_dma_stop_rx, + .dma_interrupt = sun8i_dwmac_dma_interrupt, +}; + +static int sun8i_dwmac_init(struct platform_device *pdev, void *priv) +{ + struct sunxi_priv_data *gmac = priv; + int ret; + + if (gmac->regulator) { + ret = regulator_enable(gmac->regulator); + if (ret) { + dev_err(&pdev->dev, "Fail to enable regulator\n"); + return ret; + } + } + + ret = clk_prepare_enable(gmac->tx_clk); + if (ret) { + if (gmac->regulator) + regulator_disable(gmac->regulator); + dev_err(&pdev->dev, "Could not enable AHB clock\n"); + return ret; + } + + return 0; +} + +static void sun8i_dwmac_core_init(struct mac_device_info *hw, int mtu) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + v = (8 << EMAC_BURSTLEN_SHIFT); /* burst len */ + writel(v, ioaddr + EMAC_BASIC_CTL1); +} + +static void sun8i_dwmac_set_mac(void __iomem *ioaddr, bool enable) +{ + u32 t, r; + + t = readl(ioaddr + EMAC_TX_CTL0); + r = readl(ioaddr + EMAC_RX_CTL0); + if (enable) { + t |= EMAC_TX_TRANSMITTER_EN; + r |= EMAC_RX_RECEIVER_EN; + } else { + t &= ~EMAC_TX_TRANSMITTER_EN; + r &= ~EMAC_RX_RECEIVER_EN; + } + writel(t, ioaddr + EMAC_TX_CTL0); + writel(r, ioaddr + EMAC_RX_CTL0); +} + +/* Set MAC address at slot reg_n + * All slot > 0 need to be enabled with MAC_ADDR_TYPE_DST + * If addr is NULL, clear the slot + */ +static void sun8i_dwmac_set_umac_addr(struct mac_device_info *hw, + unsigned char *addr, + unsigned int reg_n) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + if (!addr) { + writel(0, ioaddr + EMAC_MACADDR_HI(reg_n)); + return; + } + + stmmac_set_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n), + EMAC_MACADDR_LO(reg_n)); + if (reg_n > 0) { + v = readl(ioaddr + EMAC_MACADDR_HI(reg_n)); + v |= MAC_ADDR_TYPE_DST; + writel(v, ioaddr + EMAC_MACADDR_HI(reg_n)); + } +} + +static void sun8i_dwmac_get_umac_addr(struct mac_device_info *hw, + unsigned char *addr, + unsigned int reg_n) +{ + void __iomem *ioaddr = hw->pcsr; + + stmmac_get_mac_addr(ioaddr, addr, EMAC_MACADDR_HI(reg_n), + EMAC_MACADDR_LO(reg_n)); +} + +/* caution this function must return non 0 to work */ +static int sun8i_dwmac_rx_ipc_enable(struct mac_device_info *hw) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL0); + v |= EMAC_RX_DO_CRC; + writel(v, ioaddr + EMAC_RX_CTL0); + + return 1; +} + +static void sun8i_dwmac_set_filter(struct mac_device_info *hw, + struct net_device *dev) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + int i = 1; + struct netdev_hw_addr *ha; + int macaddrs = netdev_uc_count(dev) + netdev_mc_count(dev) + 1; + + v = EMAC_FRM_FLT_CTL; + + if (dev->flags & IFF_PROMISC) { + v = EMAC_FRM_FLT_RXALL; + } else if (dev->flags & IFF_ALLMULTI) { + v |= EMAC_FRM_FLT_MULTICAST; + } else if (macaddrs <= hw->unicast_filter_entries) { + if (!netdev_mc_empty(dev)) { + netdev_for_each_mc_addr(ha, dev) { + sun8i_dwmac_set_umac_addr(hw, ha->addr, i); + i++; + } + } + if (!netdev_uc_empty(dev)) { + netdev_for_each_uc_addr(ha, dev) { + sun8i_dwmac_set_umac_addr(hw, ha->addr, i); + i++; + } + } + } else { + netdev_info(dev, "Too many address, switching to promiscuous\n"); + v = EMAC_FRM_FLT_RXALL; + } + + /* Disable unused address filter slots */ + while (i < hw->unicast_filter_entries) + sun8i_dwmac_set_umac_addr(hw, NULL, i++); + + writel(v, ioaddr + EMAC_RX_FRM_FLT); +} + +static void sun8i_dwmac_flow_ctrl(struct mac_device_info *hw, + unsigned int duplex, unsigned int fc, + unsigned int pause_time, u32 tx_cnt) +{ + void __iomem *ioaddr = hw->pcsr; + u32 v; + + v = readl(ioaddr + EMAC_RX_CTL0); + if (fc == FLOW_AUTO) + v |= EMAC_RX_FLOW_CTL_EN; + else + v &= ~EMAC_RX_FLOW_CTL_EN; + writel(v, ioaddr + EMAC_RX_CTL0); + + v = readl(ioaddr + EMAC_TX_FLOW_CTL); + if (fc == FLOW_AUTO) + v |= EMAC_TX_FLOW_CTL_EN; + else + v &= ~EMAC_TX_FLOW_CTL_EN; + writel(v, ioaddr + EMAC_TX_FLOW_CTL); +} + +static int sun8i_dwmac_reset(struct stmmac_priv *priv) +{ + u32 v; + int err; + + v = readl(priv->ioaddr + EMAC_BASIC_CTL1); + writel(v | 0x01, priv->ioaddr + EMAC_BASIC_CTL1); + + err = readl_poll_timeout(priv->ioaddr + EMAC_BASIC_CTL1, v, + !(v & 0x01), 100, 10000); + + if (err) { + dev_err(priv->device, "EMAC reset timeout\n"); + return -EFAULT; + } + return 0; +} + +static int sun8i_dwmac_set_syscon(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + struct device_node *node = priv->device->of_node; + int ret; + u32 reg, val; + + regmap_read(gmac->regmap, SYSCON_EMAC_REG, &val); + reg = gmac->variant->default_syscon_value; + if (reg != val) + dev_warn(priv->device, + "Current syscon value is not the default %x (expect %x)\n", + val, reg); + + if (gmac->variant->internal_phy) { + if (!gmac->use_internal_phy) { + /* switch to external PHY interface */ + reg &= ~H3_EPHY_SELECT; + } else { + reg |= H3_EPHY_SELECT; + reg &= ~H3_EPHY_SHUTDOWN; + dev_dbg(priv->device, "Select internal_phy %x\n", reg); + + if (of_property_read_bool(priv->plat->phy_node, + "allwinner,leds-active-low")) + reg |= H3_EPHY_LED_POL; + else + reg &= ~H3_EPHY_LED_POL; + + ret = of_mdio_parse_addr(priv->device, + priv->plat->phy_node); + if (ret < 0) { + dev_err(priv->device, "Could not parse MDIO addr\n"); + return ret; + } + /* of_mdio_parse_addr returns a valid (0 ~ 31) PHY + * address. No need to mask it again. + */ + reg |= ret << H3_EPHY_ADDR_SHIFT; + } + } + + if (!of_property_read_u32(node, "allwinner,tx-delay-ps", &val)) { + if (val % 100) { + dev_err(priv->device, "tx-delay must be a multiple of 100\n"); + return -EINVAL; + } + val /= 100; + dev_dbg(priv->device, "set tx-delay to %x\n", val); + if (val <= SYSCON_ETXDC_MASK) { + reg &= ~(SYSCON_ETXDC_MASK << SYSCON_ETXDC_SHIFT); + reg |= (val << SYSCON_ETXDC_SHIFT); + } else { + dev_err(priv->device, "Invalid TX clock delay: %d\n", + val); + return -EINVAL; + } + } + + if (!of_property_read_u32(node, "allwinner,rx-delay-ps", &val)) { + if (val % 100) { + dev_err(priv->device, "rx-delay must be a multiple of 100\n"); + return -EINVAL; + } + val /= 100; + dev_dbg(priv->device, "set rx-delay to %x\n", val); + if (val <= SYSCON_ERXDC_MASK) { + reg &= ~(SYSCON_ERXDC_MASK << SYSCON_ERXDC_SHIFT); + reg |= (val << SYSCON_ERXDC_SHIFT); + } else { + dev_err(priv->device, "Invalid RX clock delay: %d\n", + val); + return -EINVAL; + } + } + + /* Clear interface mode bits */ + reg &= ~(SYSCON_ETCS_MASK | SYSCON_EPIT); + if (gmac->variant->support_rmii) + reg &= ~SYSCON_RMII_EN; + + switch (priv->plat->interface) { + case PHY_INTERFACE_MODE_MII: + /* default */ + break; + case PHY_INTERFACE_MODE_RGMII: + reg |= SYSCON_EPIT | SYSCON_ETCS_INT_GMII; + break; + case PHY_INTERFACE_MODE_RMII: + reg |= SYSCON_RMII_EN | SYSCON_ETCS_EXT_GMII; + break; + default: + dev_err(priv->device, "Unsupported interface mode: %s", + phy_modes(priv->plat->interface)); + return -EINVAL; + } + + regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); + + return 0; +} + +static void sun8i_dwmac_unset_syscon(struct sunxi_priv_data *gmac) +{ + u32 reg = gmac->variant->default_syscon_value; + + regmap_write(gmac->regmap, SYSCON_EMAC_REG, reg); +} + +static int sun8i_dwmac_power_internal_phy(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + int ret; + + if (!gmac->use_internal_phy) + return 0; + + ret = clk_prepare_enable(gmac->ephy_clk); + if (ret) { + dev_err(priv->device, "Cannot enable ephy\n"); + return ret; + } + + ret = reset_control_deassert(gmac->rst_ephy); + if (ret) { + dev_err(priv->device, "Cannot deassert ephy\n"); + clk_disable_unprepare(gmac->ephy_clk); + return ret; + } + + return 0; +} + +static int sun8i_dwmac_unpower_internal_phy(struct sunxi_priv_data *gmac) +{ + if (!gmac->use_internal_phy) + return 0; + + clk_disable_unprepare(gmac->ephy_clk); + reset_control_assert(gmac->rst_ephy); + return 0; +} + +static int sun8i_power_phy(struct stmmac_priv *priv) +{ + struct sunxi_priv_data *gmac = priv->plat->bsp_priv; + int ret; + + ret = sun8i_dwmac_power_internal_phy(priv); + if (ret) + return ret; + + ret = sun8i_dwmac_set_syscon(priv); + if (ret) + goto error_phy; + + ret = sun8i_dwmac_reset(priv); + if (ret) + goto error_phy; + return 0; + +error_phy: + sun8i_dwmac_unset_syscon(gmac); + sun8i_dwmac_unpower_internal_phy(gmac); + return ret; +} + +static void sun8i_unpower_phy(struct sunxi_priv_data *gmac) +{ + sun8i_dwmac_unset_syscon(gmac); + sun8i_dwmac_unpower_internal_phy(gmac); +} + +static void sun8i_dwmac_exit(struct platform_device *pdev, void *priv) +{ + struct sunxi_priv_data *gmac = priv; + + sun8i_unpower_phy(gmac); + + clk_disable_unprepare(gmac->tx_clk); + + if (gmac->regulator) + regulator_disable(gmac->regulator); +} + +static const struct stmmac_ops sun8i_dwmac_ops = { + .core_init = sun8i_dwmac_core_init, + .set_mac = sun8i_dwmac_set_mac, + .dump_regs = sun8i_dwmac_dump_mac_regs, + .rx_ipc = sun8i_dwmac_rx_ipc_enable, + .set_filter = sun8i_dwmac_set_filter, + .flow_ctrl = sun8i_dwmac_flow_ctrl, + .set_umac_addr = sun8i_dwmac_set_umac_addr, + .get_umac_addr = sun8i_dwmac_get_umac_addr, +}; + +static struct mac_device_info *sun8i_dwmac_setup(void *ppriv) +{ + struct mac_device_info *mac; + struct stmmac_priv *priv = ppriv; + int ret; + + mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL); + if (!mac) + return NULL; + + ret = sun8i_power_phy(priv); + if (ret) + return NULL; + + mac->pcsr = priv->ioaddr; + mac->mac = &sun8i_dwmac_ops; + mac->dma = &sun8i_dwmac_dma_ops; + + mac->link.port = 0; + mac->link.duplex = BIT(0); + mac->link.speed = 1; + mac->mii.addr = EMAC_MDIO_CMD; + mac->mii.data = EMAC_MDIO_DATA; + mac->mii.reg_shift = 4; + mac->mii.reg_mask = GENMASK(8, 4); + mac->mii.addr_shift = 12; + mac->mii.addr_mask = GENMASK(16, 12); + mac->mii.clk_csr_shift = 20; + mac->mii.clk_csr_mask = GENMASK(22, 20); + mac->unicast_filter_entries = 8; + + /* Synopsys Id is not available */ + priv->synopsys_id = 0; + + return mac; +} + +static int sun8i_dwmac_probe(struct platform_device *pdev) +{ + struct plat_stmmacenet_data *plat_dat; + struct stmmac_resources stmmac_res; + struct sunxi_priv_data *gmac; + struct device *dev = &pdev->dev; + int ret; + + ret = stmmac_get_platform_resources(pdev, &stmmac_res); + if (ret) + return ret; + + plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac); + if (IS_ERR(plat_dat)) + return PTR_ERR(plat_dat); + + gmac = devm_kzalloc(dev, sizeof(*gmac), GFP_KERNEL); + if (!gmac) + return -ENOMEM; + + gmac->variant = of_device_get_match_data(&pdev->dev); + if (!gmac->variant) { + dev_err(&pdev->dev, "Missing dwmac-sun8i variant\n"); + return -EINVAL; + } + + gmac->tx_clk = devm_clk_get(dev, "stmmaceth"); + if (IS_ERR(gmac->tx_clk)) { + dev_err(dev, "Could not get TX clock\n"); + return PTR_ERR(gmac->tx_clk); + } + + /* Optional regulator for PHY */ + gmac->regulator = devm_regulator_get_optional(dev, "phy"); + if (IS_ERR(gmac->regulator)) { + if (PTR_ERR(gmac->regulator) == -EPROBE_DEFER) + return -EPROBE_DEFER; + dev_info(dev, "No regulator found\n"); + gmac->regulator = NULL; + } + + gmac->regmap = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "syscon"); + if (IS_ERR(gmac->regmap)) { + ret = PTR_ERR(gmac->regmap); + dev_err(&pdev->dev, "Unable to map syscon: %d\n", ret); + return ret; + } + + plat_dat->interface = of_get_phy_mode(dev->of_node); + if (plat_dat->interface == gmac->variant->internal_phy) { + dev_info(&pdev->dev, "Will use internal PHY\n"); + gmac->use_internal_phy = true; + gmac->ephy_clk = of_clk_get(plat_dat->phy_node, 0); + if (IS_ERR(gmac->ephy_clk)) { + ret = PTR_ERR(gmac->ephy_clk); + dev_err(&pdev->dev, "Cannot get EPHY clock: %d\n", ret); + return -EINVAL; + } + + gmac->rst_ephy = of_reset_control_get(plat_dat->phy_node, NULL); + if (IS_ERR(gmac->rst_ephy)) { + ret = PTR_ERR(gmac->rst_ephy); + if (ret == -EPROBE_DEFER) + return ret; + dev_err(&pdev->dev, "No EPHY reset control found %d\n", + ret); + return -EINVAL; + } + } else { + dev_info(&pdev->dev, "Will use external PHY\n"); + gmac->use_internal_phy = false; + } + + /* platform data specifying hardware features and callbacks. + * hardware features were copied from Allwinner drivers. + */ + plat_dat->rx_coe = STMMAC_RX_COE_TYPE2; + plat_dat->tx_coe = 1; + plat_dat->has_sun8i = true; + plat_dat->bsp_priv = gmac; + plat_dat->init = sun8i_dwmac_init; + plat_dat->exit = sun8i_dwmac_exit; + plat_dat->setup = sun8i_dwmac_setup; + + ret = sun8i_dwmac_init(pdev, plat_dat->bsp_priv); + if (ret) + return ret; + + ret = stmmac_dvr_probe(&pdev->dev, plat_dat, &stmmac_res); + if (ret) + sun8i_dwmac_exit(pdev, plat_dat->bsp_priv); + + return ret; +} + +static const struct of_device_id sun8i_dwmac_match[] = { + { .compatible = "allwinner,sun8i-h3-emac", + .data = &emac_variant_h3 }, + { .compatible = "allwinner,sun8i-a83t-emac", + .data = &emac_variant_a83t }, + { .compatible = "allwinner,sun50i-a64-emac", + .data = &emac_variant_a64 }, + { } +}; +MODULE_DEVICE_TABLE(of, sun8i_dwmac_match); + +static struct platform_driver sun8i_dwmac_driver = { + .probe = sun8i_dwmac_probe, + .remove = stmmac_pltfr_remove, + .driver = { + .name = "dwmac-sun8i", + .pm = &stmmac_pltfr_pm_ops, + .of_match_table = sun8i_dwmac_match, + }, +}; +module_platform_driver(sun8i_dwmac_driver); + +MODULE_AUTHOR("Corentin Labbe "); +MODULE_DESCRIPTION("Allwinner sun8i DWMAC specific glue layer"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index b82ab64..39777a7 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -235,6 +235,17 @@ static void stmmac_clk_csr_set(struct stmmac_priv *priv) else if ((clk_rate >= CSR_F_250M) && (clk_rate < CSR_F_300M)) priv->clk_csr = STMMAC_CSR_250_300M; } + + if (priv->plat->has_sun8i) { + if (clk_rate > 160000000) + priv->clk_csr = 0x03; + else if (clk_rate > 80000000) + priv->clk_csr = 0x02; + else if (clk_rate > 40000000) + priv->clk_csr = 0x01; + else + priv->clk_csr = 0; + } } static void print_pkt(unsigned char *buf, int len) @@ -784,6 +795,14 @@ static void stmmac_adjust_link(struct net_device *dev) if (phydev->link) { u32 ctrl = readl(priv->ioaddr + MAC_CTRL_REG); + /* dwmac-sun8i handle loopback in MAC_CTRL_REG */ + if (priv->plat->has_sun8i) { + if (dev->features & NETIF_F_LOOPBACK) + ctrl |= BIT(1); + else + ctrl &= ~BIT(1); + } + /* Now we make sure that we can be in full duplex mode. * If not, we operate in half-duplex mode. */ if (phydev->duplex != priv->oldduplex) { @@ -800,6 +819,8 @@ static void stmmac_adjust_link(struct net_device *dev) if (phydev->speed != priv->speed) { new_state = 1; + if (priv->plat->has_sun8i) + ctrl &= ~GENMASK(3, 2); switch (phydev->speed) { case 1000: if (priv->plat->has_gmac || @@ -811,6 +832,8 @@ static void stmmac_adjust_link(struct net_device *dev) priv->plat->has_gmac4) { ctrl |= priv->hw->link.port; ctrl |= priv->hw->link.speed; + } else if (priv->plat->has_sun8i) { + ctrl |= 3 << 2; } else { ctrl &= ~priv->hw->link.port; } @@ -820,6 +843,8 @@ static void stmmac_adjust_link(struct net_device *dev) priv->plat->has_gmac4) { ctrl |= priv->hw->link.port; ctrl &= ~(priv->hw->link.speed); + } else if (priv->plat->has_sun8i) { + ctrl |= 2 << 2; } else { ctrl &= ~priv->hw->link.port; } @@ -3969,6 +3994,10 @@ static int stmmac_hw_init(struct stmmac_priv *priv) priv->hw = mac; + /* dwmac-sun8i only work in chain mode */ + if (priv->plat->has_sun8i) + chain_mode = 1; + /* To use the chained or ring mode */ if (priv->synopsys_id >= DWMAC_CORE_4_00) { priv->hw->mode = &dwmac4_ring_mode_ops; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index 7fc3a1e..3840529 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -309,6 +309,12 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, struct device_node *np, struct device *dev) { bool mdio = true; + static const struct of_device_id need_mdio_ids[] = { + { .compatible = "snps,dwc-qos-ethernet-4.10" }, + { .compatible = "allwinner,sun8i-a83t-emac" }, + { .compatible = "allwinner,sun8i-h3-emac" }, + { .compatible = "allwinner,sun50i-a64-emac" }, + }; /* If phy-handle property is passed from DT, use it as the PHY */ plat->phy_node = of_parse_phandle(np, "phy-handle", 0); @@ -325,8 +331,7 @@ static int stmmac_dt_phy(struct plat_stmmacenet_data *plat, mdio = false; } - /* exception for dwmac-dwc-qos-eth glue logic */ - if (of_device_is_compatible(np, "snps,dwc-qos-ethernet-4.10")) { + if (of_match_node(need_mdio_ids, np)) { plat->mdio_node = of_get_child_by_name(np, "mdio"); } else { /** diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index 8bb550b..108739f 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -186,6 +186,7 @@ struct plat_stmmacenet_data { struct reset_control *stmmac_rst; struct stmmac_axi *axi; int has_gmac4; + bool has_sun8i; bool tso_en; int mac_port_sel_speed; bool en_tx_lpi_clockgating; From patchwork Mon May 1 12:45:18 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5,18/20] arm: sunxi: Enable dwmac-sun8i driver on sunxi_defconfig From: Corentin LABBE X-Patchwork-Id: 9706507 Message-Id: <20170501124520.3769-19-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:18 +0200 Enable the dwmac-sun8i driver in the sunxi default configuration Signed-off-by: Corentin Labbe --- arch/arm/configs/sunxi_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/sunxi_defconfig b/arch/arm/configs/sunxi_defconfig index 5cd5dd70..504e022 100644 --- a/arch/arm/configs/sunxi_defconfig +++ b/arch/arm/configs/sunxi_defconfig @@ -40,6 +40,7 @@ CONFIG_ATA=y CONFIG_AHCI_SUNXI=y CONFIG_NETDEVICES=y CONFIG_SUN4I_EMAC=y +CONFIG_DWMAC_SUN8I=y # CONFIG_NET_VENDOR_ARC is not set # CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_BROADCOM is not set From patchwork Mon May 1 12:45:19 2017 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit Subject: [v5, 19/20] arm: multi_v7: Enable dwmac-sun8i driver on multi_v7_defconfig From: Corentin LABBE X-Patchwork-Id: 9706513 Message-Id: <20170501124520.3769-20-clabbe.montjoie@gmail.com> To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Date: Mon, 1 May 2017 14:45:19 +0200 Enable the dwmac-sun8i driver in the multi_v7 default configuration Signed-off-by: Corentin Labbe --- arch/arm/configs/multi_v7_defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 2685e03..6da6af8 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -257,6 +257,7 @@ CONFIG_SMSC911X=y CONFIG_STMMAC_ETH=y CONFIG_STMMAC_PLATFORM=y CONFIG_DWMAC_DWC_QOS_ETH=y +CONFIG_DWMAC_SUN8I=y CONFIG_TI_CPSW=y CONFIG_XILINX_EMACLITE=y CONFIG_AT803X_PHY=y