From ba60a01e02086b0a242cf5ea3c59419108ada40b Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 11 Jun 2019 19:58:34 +0200 Subject: [PATCH 1/5] clk: bcm2835: remove pllb Raspberry Pi's firmware controls this pll, we should use the firmware interface to access it. Signed-off-by: Nicolas Saenz Julienne Acked-by: Eric Anholt --- drivers/clk/bcm/clk-bcm2835.c | 28 ++++------------------------ 1 file changed, 4 insertions(+), 24 deletions(-) diff --git a/drivers/clk/bcm/clk-bcm2835.c b/drivers/clk/bcm/clk-bcm2835.c index 770bb01f523e..867ae3c20041 100644 --- a/drivers/clk/bcm/clk-bcm2835.c +++ b/drivers/clk/bcm/clk-bcm2835.c @@ -1651,30 +1651,10 @@ static const struct bcm2835_clk_desc clk_desc_array[] = { .fixed_divider = 1, .flags = CLK_SET_RATE_PARENT), - /* PLLB is used for the ARM's clock. */ - [BCM2835_PLLB] = REGISTER_PLL( - .name = "pllb", - .cm_ctrl_reg = CM_PLLB, - .a2w_ctrl_reg = A2W_PLLB_CTRL, - .frac_reg = A2W_PLLB_FRAC, - .ana_reg_base = A2W_PLLB_ANA0, - .reference_enable_mask = A2W_XOSC_CTRL_PLLB_ENABLE, - .lock_mask = CM_LOCK_FLOCKB, - - .ana = &bcm2835_ana_default, - - .min_rate = 600000000u, - .max_rate = 3000000000u, - .max_fb_rate = BCM2835_MAX_FB_RATE), - [BCM2835_PLLB_ARM] = REGISTER_PLL_DIV( - .name = "pllb_arm", - .source_pll = "pllb", - .cm_reg = CM_PLLB, - .a2w_reg = A2W_PLLB_ARM, - .load_mask = CM_PLLB_LOADARM, - .hold_mask = CM_PLLB_HOLDARM, - .fixed_divider = 1, - .flags = CLK_SET_RATE_PARENT), + /* + * PLLB is used for the ARM's clock. Controlled by firmware, see + * clk-raspberrypi.c. + */ /* * PLLC is the core PLL, used to drive the core VPU clock. -- 2.21.0 From 64482a97a0a2f14ebdbfe80a8eb0e063d293807b Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Wed, 12 Jun 2019 17:23:12 +0100 Subject: [PATCH 2/5] clk: bcm283x: add driver interfacing with Raspberry Pi's firmware Raspberry Pi's firmware offers an interface though which update it's clock's frequencies. This is specially useful in order to change the CPU clock (pllb_arm) which is 'owned' by the firmware and we're unable to scale using the register interface provided by clk-bcm2835. Signed-off-by: Nicolas Saenz Julienne Acked-by: Eric Anholt Signed-off-by: Peter Robinson --- drivers/clk/bcm/Kconfig | 7 + drivers/clk/bcm/Makefile | 1 + drivers/clk/bcm/clk-raspberrypi.c | 300 ++++++++++++++++++++++++++++++ 3 files changed, 308 insertions(+) create mode 100644 drivers/clk/bcm/clk-raspberrypi.c diff --git a/drivers/clk/bcm/Kconfig b/drivers/clk/bcm/Kconfig index 29ee7b776cd4..a4a2775d65e1 100644 --- a/drivers/clk/bcm/Kconfig +++ b/drivers/clk/bcm/Kconfig @@ -64,3 +64,10 @@ config CLK_BCM_SR default ARCH_BCM_IPROC help Enable common clock framework support for the Broadcom Stingray SoC + +config CLK_RASPBERRYPI + tristate "Raspberry Pi firmware based clock support" + depends on RASPBERRYPI_FIRMWARE || (COMPILE_TEST && !RASPBERRYPI_FIRMWARE) + help + Enable common clock framework support for Raspberry Pi's firmware + dependent clocks diff --git a/drivers/clk/bcm/Makefile b/drivers/clk/bcm/Makefile index 002661d39128..eb7159099d82 100644 --- a/drivers/clk/bcm/Makefile +++ b/drivers/clk/bcm/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_CLK_BCM_KONA) += clk-bcm21664.o obj-$(CONFIG_COMMON_CLK_IPROC) += clk-iproc-armpll.o clk-iproc-pll.o clk-iproc-asiu.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835.o obj-$(CONFIG_ARCH_BCM2835) += clk-bcm2835-aux.o +obj-$(CONFIG_CLK_RASPBERRYPI) += clk-raspberrypi.o obj-$(CONFIG_ARCH_BCM_53573) += clk-bcm53573-ilp.o obj-$(CONFIG_CLK_BCM_CYGNUS) += clk-cygnus.o obj-$(CONFIG_CLK_BCM_HR2) += clk-hr2.o diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c new file mode 100644 index 000000000000..467933767106 --- /dev/null +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -0,0 +1,300 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Raspberry Pi driver for firmware controlled clocks + * + * Even though clk-bcm2835 provides an interface to the hardware registers for + * the system clocks we've had to factor out 'pllb' as the firmware 'owns' it. + * We're not allowed to change it directly as we might race with the + * over-temperature and under-voltage protections provided by the firmware. + * + * Copyright (C) 2019 Nicolas Saenz Julienne + */ + +#include +#include +#include +#include +#include + +#include + +#define RPI_FIRMWARE_ARM_CLK_ID 0x000000003 + +#define RPI_FIRMWARE_STATE_ENABLE_BIT BIT(0) +#define RPI_FIRMWARE_STATE_WAIT_BIT BIT(1) + +/* + * Even though the firmware interface alters 'pllb' the frequencies are + * provided as per 'pllb_arm'. We need to scale before passing them trough. + */ +#define RPI_FIRMWARE_PLLB_ARM_DIV_RATE 2 + +#define A2W_PLL_FRAC_BITS 20 + +struct raspberrypi_clk { + struct device *dev; + struct rpi_firmware *firmware; + + unsigned long min_rate; + unsigned long max_rate; + + struct clk_hw pllb; + struct clk_hw *pllb_arm; + struct clk_lookup *pllb_arm_lookup; +}; + +/* + * Structure of the message passed to Raspberry Pi's firmware in order to + * change clock rates. The 'disable_turbo' option is only available to the ARM + * clock (pllb) which we enable by default as turbo mode will alter multiple + * clocks at once. + * + * Even though we're able to access the clock registers directly we're bound to + * use the firmware interface as the firmware ultimately takes care of + * mitigating overheating/undervoltage situations and we would be changing + * frequencies behind his back. + * + * For more information on the firmware interface check: + * https://github.com/raspberrypi/firmware/wiki/Mailbox-property-interface + */ +struct raspberrypi_firmware_prop { + __le32 id; + __le32 val; + __le32 disable_turbo; +} __packed; + +static int raspberrypi_clock_property(struct rpi_firmware *firmware, u32 tag, + u32 clk, u32 *val) +{ + struct raspberrypi_firmware_prop msg = { + .id = clk, + .val = *val, + .disable_turbo = 1, + }; + int ret; + + ret = rpi_firmware_property(firmware, tag, &msg, sizeof(msg)); + if (ret) + return ret; + + *val = msg.val; + + return 0; +} + +static int raspberrypi_fw_pll_is_on(struct clk_hw *hw) +{ + struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, + pllb); + u32 val = 0; + int ret; + + ret = raspberrypi_clock_property(rpi->firmware, + RPI_FIRMWARE_GET_CLOCK_STATE, + RPI_FIRMWARE_ARM_CLK_ID, &val); + if (ret) + return 0; + + return !!(val & RPI_FIRMWARE_STATE_ENABLE_BIT); +} + + +static unsigned long raspberrypi_fw_pll_get_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, + pllb); + u32 val = 0; + int ret; + + ret = raspberrypi_clock_property(rpi->firmware, + RPI_FIRMWARE_GET_CLOCK_RATE, + RPI_FIRMWARE_ARM_CLK_ID, + &val); + if (ret) + return ret; + + return val * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; +} + +static int raspberrypi_fw_pll_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, + pllb); + u32 new_rate = rate / RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + int ret; + + ret = raspberrypi_clock_property(rpi->firmware, + RPI_FIRMWARE_SET_CLOCK_RATE, + RPI_FIRMWARE_ARM_CLK_ID, + &new_rate); + if (ret) + dev_err_ratelimited(rpi->dev, "Failed to change %s frequency: %d", + clk_hw_get_name(hw), ret); + + return ret; +} + +/* + * Sadly there is no firmware rate rounding interface. We borrowed it from + * clk-bcm2835. + */ +static int raspberrypi_pll_determine_rate(struct clk_hw *hw, + struct clk_rate_request *req) +{ + struct raspberrypi_clk *rpi = container_of(hw, struct raspberrypi_clk, + pllb); + u64 div, final_rate; + u32 ndiv, fdiv; + + /* We can't use req->rate directly as it would overflow */ + final_rate = clamp(req->rate, rpi->min_rate, rpi->max_rate); + + div = (u64)final_rate << A2W_PLL_FRAC_BITS; + do_div(div, req->best_parent_rate); + + ndiv = div >> A2W_PLL_FRAC_BITS; + fdiv = div & ((1 << A2W_PLL_FRAC_BITS) - 1); + + final_rate = ((u64)req->best_parent_rate * + ((ndiv << A2W_PLL_FRAC_BITS) + fdiv)); + + req->rate = final_rate >> A2W_PLL_FRAC_BITS; + + return 0; +} + +static const struct clk_ops raspberrypi_firmware_pll_clk_ops = { + .is_prepared = raspberrypi_fw_pll_is_on, + .recalc_rate = raspberrypi_fw_pll_get_rate, + .set_rate = raspberrypi_fw_pll_set_rate, + .determine_rate = raspberrypi_pll_determine_rate, +}; + +static int raspberrypi_register_pllb(struct raspberrypi_clk *rpi) +{ + u32 min_rate = 0, max_rate = 0; + struct clk_init_data init; + int ret; + + memset(&init, 0, sizeof(init)); + + /* All of the PLLs derive from the external oscillator. */ + init.parent_names = (const char *[]){ "osc" }; + init.num_parents = 1; + init.name = "pllb"; + init.ops = &raspberrypi_firmware_pll_clk_ops; + init.flags = CLK_GET_RATE_NOCACHE | CLK_IGNORE_UNUSED; + + /* Get min & max rates set by the firmware */ + ret = raspberrypi_clock_property(rpi->firmware, + RPI_FIRMWARE_GET_MIN_CLOCK_RATE, + RPI_FIRMWARE_ARM_CLK_ID, + &min_rate); + if (ret) { + dev_err(rpi->dev, "Failed to get %s min freq: %d\n", + init.name, ret); + return ret; + } + + ret = raspberrypi_clock_property(rpi->firmware, + RPI_FIRMWARE_GET_MAX_CLOCK_RATE, + RPI_FIRMWARE_ARM_CLK_ID, + &max_rate); + if (ret) { + dev_err(rpi->dev, "Failed to get %s max freq: %d\n", + init.name, ret); + return ret; + } + + if (!min_rate || !max_rate) { + dev_err(rpi->dev, "Unexpected frequency range: min %u, max %u\n", + min_rate, max_rate); + return -EINVAL; + } + + dev_info(rpi->dev, "CPU frequency range: min %u, max %u\n", + min_rate, max_rate); + + rpi->min_rate = min_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + rpi->max_rate = max_rate * RPI_FIRMWARE_PLLB_ARM_DIV_RATE; + + rpi->pllb.init = &init; + + return devm_clk_hw_register(rpi->dev, &rpi->pllb); +} + +static int raspberrypi_register_pllb_arm(struct raspberrypi_clk *rpi) +{ + rpi->pllb_arm = clk_hw_register_fixed_factor(rpi->dev, + "pllb_arm", "pllb", + CLK_SET_RATE_PARENT | CLK_GET_RATE_NOCACHE, + 1, 2); + if (IS_ERR(rpi->pllb_arm)) { + dev_err(rpi->dev, "Failed to initialize pllb_arm\n"); + return PTR_ERR(rpi->pllb_arm); + } + + rpi->pllb_arm_lookup = clkdev_hw_create(rpi->pllb_arm, NULL, "cpu0"); + if (!rpi->pllb_arm_lookup) { + dev_err(rpi->dev, "Failed to initialize pllb_arm_lookup\n"); + clk_hw_unregister_fixed_factor(rpi->pllb_arm); + return -ENOMEM; + } + + return 0; +} + +static int raspberrypi_clk_probe(struct platform_device *pdev) +{ + struct device_node *firmware_node; + struct device *dev = &pdev->dev; + struct rpi_firmware *firmware; + struct raspberrypi_clk *rpi; + int ret; + + firmware_node = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (!firmware_node) { + dev_err(dev, "Missing firmware node\n"); + return -ENOENT; + } + + firmware = rpi_firmware_get(firmware_node); + of_node_put(firmware_node); + if (!firmware) + return -EPROBE_DEFER; + + rpi = devm_kzalloc(dev, sizeof(*rpi), GFP_KERNEL); + if (!rpi) + return -ENOMEM; + + rpi->dev = dev; + rpi->firmware = firmware; + + ret = raspberrypi_register_pllb(rpi); + if (ret) { + dev_err(dev, "Failed to initialize pllb, %d\n", ret); + return ret; + } + + ret = raspberrypi_register_pllb_arm(rpi); + if (ret) + return ret; + + return 0; +} + +static struct platform_driver raspberrypi_clk_driver = { + .driver = { + .name = "raspberrypi-clk", + }, + .probe = raspberrypi_clk_probe, +}; +module_platform_driver(raspberrypi_clk_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne "); +MODULE_DESCRIPTION("Raspberry Pi firmware clock driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:raspberrypi-clk"); -- 2.21.0 From e750e62addb9ee00f47ab4a73c0645d44172ab12 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 11 Jun 2019 19:58:38 +0200 Subject: [PATCH 3/5] firmware: raspberrypi: register clk device Since clk-raspberrypi is tied to the VC4 firmware instead of particular hardware it's registration should be performed by the firmware driver. Signed-off-by: Nicolas Saenz Julienne Acked-by: Eric Anholt --- drivers/firmware/raspberrypi.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/drivers/firmware/raspberrypi.c b/drivers/firmware/raspberrypi.c index 61be15d9df7d..da26a584dca0 100644 --- a/drivers/firmware/raspberrypi.c +++ b/drivers/firmware/raspberrypi.c @@ -20,6 +20,7 @@ #define MBOX_CHAN_PROPERTY 8 static struct platform_device *rpi_hwmon; +static struct platform_device *rpi_clk; struct rpi_firmware { struct mbox_client cl; @@ -207,6 +208,12 @@ rpi_register_hwmon_driver(struct device *dev, struct rpi_firmware *fw) -1, NULL, 0); } +static void rpi_register_clk_driver(struct device *dev) +{ + rpi_clk = platform_device_register_data(dev, "raspberrypi-clk", + -1, NULL, 0); +} + static int rpi_firmware_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -234,6 +241,7 @@ static int rpi_firmware_probe(struct platform_device *pdev) rpi_firmware_print_firmware_revision(fw); rpi_register_hwmon_driver(dev, fw); + rpi_register_clk_driver(dev); return 0; } @@ -254,6 +262,8 @@ static int rpi_firmware_remove(struct platform_device *pdev) platform_device_unregister(rpi_hwmon); rpi_hwmon = NULL; + platform_device_unregister(rpi_clk); + rpi_clk = NULL; mbox_free_channel(fw->chan); return 0; -- 2.21.0 From a94ed1abc52b51c55454b3f1a7181af9d91d9d73 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 11 Jun 2019 19:58:40 +0200 Subject: [PATCH 4/5] cpufreq: add driver for Raspbery Pi Raspberry Pi's firmware offers and interface though which update it's performance requirements. It allows us to request for specific runtime frequencies, which the firmware might or might not respect, depending on the firmware configuration and thermals. As the maximum and minimum frequencies are configurable in the firmware there is no way to know in advance their values. So the Raspberry Pi cpufreq driver queries them, builds an opp frequency table to then launch cpufreq-dt. Also, as the firmware interface might be configured as a module, making the cpu clock unavailable during init, this implements a full fledged driver, as opposed to most drivers registering cpufreq-dt, which only make use of an init routine. Signed-off-by: Nicolas Saenz Julienne Acked-by: Eric Anholt Reviewed-by: Stephen Boyd --- drivers/cpufreq/Kconfig.arm | 8 +++ drivers/cpufreq/Makefile | 1 + drivers/cpufreq/raspberrypi-cpufreq.c | 97 +++++++++++++++++++++++++++ 3 files changed, 106 insertions(+) create mode 100644 drivers/cpufreq/raspberrypi-cpufreq.c diff --git a/drivers/cpufreq/Kconfig.arm b/drivers/cpufreq/Kconfig.arm index f8129edc145e..5e9204d443ff 100644 --- a/drivers/cpufreq/Kconfig.arm +++ b/drivers/cpufreq/Kconfig.arm @@ -133,6 +133,14 @@ config ARM_QCOM_CPUFREQ_HW The driver implements the cpufreq interface for this HW engine. Say Y if you want to support CPUFreq HW. +config ARM_RASPBERRYPI_CPUFREQ + tristate "Raspberry Pi cpufreq support" + depends on CLK_RASPBERRYPI || COMPILE_TEST + help + This adds the CPUFreq driver for Raspberry Pi + + If in doubt, say N. + config ARM_S3C_CPUFREQ bool help diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 689b26c6f949..121c1acb66c0 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_ARM_PXA2xx_CPUFREQ) += pxa2xx-cpufreq.o obj-$(CONFIG_PXA3xx) += pxa3xx-cpufreq.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_HW) += qcom-cpufreq-hw.o obj-$(CONFIG_ARM_QCOM_CPUFREQ_KRYO) += qcom-cpufreq-kryo.o +obj-$(CONFIG_ARM_RASPBERRYPI_CPUFREQ) += raspberrypi-cpufreq.o obj-$(CONFIG_ARM_S3C2410_CPUFREQ) += s3c2410-cpufreq.o obj-$(CONFIG_ARM_S3C2412_CPUFREQ) += s3c2412-cpufreq.o obj-$(CONFIG_ARM_S3C2416_CPUFREQ) += s3c2416-cpufreq.o diff --git a/drivers/cpufreq/raspberrypi-cpufreq.c b/drivers/cpufreq/raspberrypi-cpufreq.c new file mode 100644 index 000000000000..2bc7d9734272 --- /dev/null +++ b/drivers/cpufreq/raspberrypi-cpufreq.c @@ -0,0 +1,97 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Raspberry Pi cpufreq driver + * + * Copyright (C) 2019, Nicolas Saenz Julienne + */ + +#include +#include +#include +#include +#include +#include + +#define RASPBERRYPI_FREQ_INTERVAL 100000000 + +static struct platform_device *cpufreq_dt; + +static int raspberrypi_cpufreq_probe(struct platform_device *pdev) +{ + struct device *cpu_dev; + unsigned long min, max; + unsigned long rate; + struct clk *clk; + int ret; + + cpu_dev = get_cpu_device(0); + if (!cpu_dev) { + pr_err("Cannot get CPU for cpufreq driver\n"); + return -ENODEV; + } + + clk = clk_get(cpu_dev, NULL); + if (IS_ERR(clk)) { + dev_err(cpu_dev, "Cannot get clock for CPU0\n"); + return PTR_ERR(clk); + } + + /* + * The max and min frequencies are configurable in the Raspberry Pi + * firmware, so we query them at runtime. + */ + min = roundup(clk_round_rate(clk, 0), RASPBERRYPI_FREQ_INTERVAL); + max = roundup(clk_round_rate(clk, ULONG_MAX), RASPBERRYPI_FREQ_INTERVAL); + clk_put(clk); + + for (rate = min; rate <= max; rate += RASPBERRYPI_FREQ_INTERVAL) { + ret = dev_pm_opp_add(cpu_dev, rate, 0); + if (ret) + goto remove_opp; + } + + cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0); + ret = PTR_ERR_OR_ZERO(cpufreq_dt); + if (ret) { + dev_err(cpu_dev, "Failed to create platform device, %d\n", ret); + goto remove_opp; + } + + return 0; + +remove_opp: + dev_pm_opp_remove_all_dynamic(cpu_dev); + + return ret; +} + +static int raspberrypi_cpufreq_remove(struct platform_device *pdev) +{ + struct device *cpu_dev; + + cpu_dev = get_cpu_device(0); + if (cpu_dev) + dev_pm_opp_remove_all_dynamic(cpu_dev); + + platform_device_unregister(cpufreq_dt); + + return 0; +} + +/* + * Since the driver depends on clk-raspberrypi, which may return EPROBE_DEFER, + * all the activity is performed in the probe, which may be defered as well. + */ +static struct platform_driver raspberrypi_cpufreq_driver = { + .driver = { + .name = "raspberrypi-cpufreq", + }, + .probe = raspberrypi_cpufreq_probe, + .remove = raspberrypi_cpufreq_remove, +}; +module_platform_driver(raspberrypi_cpufreq_driver); + +MODULE_AUTHOR("Nicolas Saenz Julienne Date: Tue, 11 Jun 2019 19:58:42 +0200 Subject: [PATCH 5/5] clk: raspberrypi: register platform device for raspberrypi-cpufreq As 'clk-raspberrypi' depends on RPi's firmware interface, which might be configured as a module, the cpu clock might not be available for the cpufreq driver during it's init process. So we register the 'raspberrypi-cpufreq' platform device after the probe sequence succeeds. Signed-off-by: Nicolas Saenz Julienne Acked-by: Eric Anholt --- drivers/clk/bcm/clk-raspberrypi.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/clk/bcm/clk-raspberrypi.c b/drivers/clk/bcm/clk-raspberrypi.c index 467933767106..7f9b001f8d70 100644 --- a/drivers/clk/bcm/clk-raspberrypi.c +++ b/drivers/clk/bcm/clk-raspberrypi.c @@ -34,6 +34,7 @@ struct raspberrypi_clk { struct device *dev; struct rpi_firmware *firmware; + struct platform_device *cpufreq; unsigned long min_rate; unsigned long max_rate; @@ -272,6 +273,7 @@ static int raspberrypi_clk_probe(struct platform_device *pdev) rpi->dev = dev; rpi->firmware = firmware; + platform_set_drvdata(pdev, rpi); ret = raspberrypi_register_pllb(rpi); if (ret) { @@ -283,6 +285,18 @@ static int raspberrypi_clk_probe(struct platform_device *pdev) if (ret) return ret; + rpi->cpufreq = platform_device_register_data(dev, "raspberrypi-cpufreq", + -1, NULL, 0); + + return 0; +} + +static int raspberrypi_clk_remove(struct platform_device *pdev) +{ + struct raspberrypi_clk *rpi = platform_get_drvdata(pdev); + + platform_device_unregister(rpi->cpufreq); + return 0; } @@ -291,6 +305,7 @@ static struct platform_driver raspberrypi_clk_driver = { .name = "raspberrypi-clk", }, .probe = raspberrypi_clk_probe, + .remove = raspberrypi_clk_remove, }; module_platform_driver(raspberrypi_clk_driver); -- 2.21.0