From d3d7658459c214edc622022b0e1f1cfcabda5763 Mon Sep 17 00:00:00 2001 From: Fedora Kernel Team Date: Mon, 5 Aug 2019 07:51:10 -0500 Subject: [PATCH] Revert for bz 1737046 --- drivers/pci/pci.c | 29 +++++---------- drivers/pci/pci.h | 1 - drivers/pci/pcie/portdrv_core.c | 66 --------------------------------- 3 files changed, 10 insertions(+), 86 deletions(-) diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index 720da09..088fcdc 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -1004,10 +1004,15 @@ static void __pci_start_power_transition(struct pci_dev *dev, pci_power_t state) if (state == PCI_D0) { pci_platform_power_transition(dev, PCI_D0); /* - * Mandatory power management transition delays are - * handled in the PCIe portdrv resume hooks. + * Mandatory power management transition delays, see + * PCI Express Base Specification Revision 2.0 Section + * 6.6.1: Conventional Reset. Do not delay for + * devices powered on/off by corresponding bridge, + * because have already delayed for the bridge. */ if (dev->runtime_d3cold) { + if (dev->d3cold_delay && !dev->imm_ready) + msleep(dev->d3cold_delay); /* * When powering on a bridge from D3cold, the * whole hierarchy may be powered on into @@ -4570,16 +4575,14 @@ static int pci_pm_reset(struct pci_dev *dev, int probe) return pci_dev_wait(dev, "PM D3->D0", PCIE_RESET_READY_POLL_MS); } - /** - * pcie_wait_for_link_delay - Wait until link is active or inactive + * pcie_wait_for_link - Wait until link is active or inactive * @pdev: Bridge device * @active: waiting for active or inactive? - * @delay: Delay to wait after link has become active (in ms) * * Use this to wait till link becomes active or inactive. */ -bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay) +bool pcie_wait_for_link(struct pci_dev *pdev, bool active) { int timeout = 1000; bool ret; @@ -4616,25 +4619,13 @@ bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay) timeout -= 10; } if (active && ret) - msleep(delay); + msleep(100); else if (ret != active) pci_info(pdev, "Data Link Layer Link Active not %s in 1000 msec\n", active ? "set" : "cleared"); return ret == active; } -/** - * pcie_wait_for_link - Wait until link is active or inactive - * @pdev: Bridge device - * @active: waiting for active or inactive? - * - * Use this to wait till link becomes active or inactive. - */ -bool pcie_wait_for_link(struct pci_dev *pdev, bool active) -{ - return pcie_wait_for_link_delay(pdev, active, 100); -} - void pci_reset_secondary_bus(struct pci_dev *dev) { u16 ctrl; diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 59802b3..9cb9938 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -493,7 +493,6 @@ static inline int pci_dev_specific_disable_acs_redir(struct pci_dev *dev) void pcie_do_recovery(struct pci_dev *dev, enum pci_channel_state state, u32 service); -bool pcie_wait_for_link_delay(struct pci_dev *pdev, bool active, int delay); bool pcie_wait_for_link(struct pci_dev *pdev, bool active); #ifdef CONFIG_PCIEASPM void pcie_aspm_init_link_state(struct pci_dev *pdev); diff --git a/drivers/pci/pcie/portdrv_core.c b/drivers/pci/pcie/portdrv_core.c index 308c3e0..1b33012 100644 --- a/drivers/pci/pcie/portdrv_core.c +++ b/drivers/pci/pcie/portdrv_core.c @@ -9,7 +9,6 @@ #include #include #include -#include #include #include #include @@ -379,67 +378,6 @@ static int pm_iter(struct device *dev, void *data) return 0; } -static int get_downstream_delay(struct pci_bus *bus) -{ - struct pci_dev *pdev; - int min_delay = 100; - int max_delay = 0; - - list_for_each_entry(pdev, &bus->devices, bus_list) { - if (!pdev->imm_ready) - min_delay = 0; - else if (pdev->d3cold_delay < min_delay) - min_delay = pdev->d3cold_delay; - if (pdev->d3cold_delay > max_delay) - max_delay = pdev->d3cold_delay; - } - - return max(min_delay, max_delay); -} - -/* - * wait_for_downstream_link - Wait for downstream link to establish - * @pdev: PCIe port whose downstream link is waited - * - * Handle delays according to PCIe 4.0 section 6.6.1 before configuration - * access to the downstream component is permitted. - * - * This blocks PCI core resume of the hierarchy below this port until the - * link is trained. Should be called before resuming port services to - * prevent pciehp from starting to tear-down the hierarchy too soon. - */ -static void wait_for_downstream_link(struct pci_dev *pdev) -{ - int delay; - - if (pci_pcie_type(pdev) != PCI_EXP_TYPE_ROOT_PORT && - pci_pcie_type(pdev) != PCI_EXP_TYPE_DOWNSTREAM) - return; - - if (pci_dev_is_disconnected(pdev)) - return; - - if (!pdev->subordinate || list_empty(&pdev->subordinate->devices) || - !pdev->bridge_d3) - return; - - delay = get_downstream_delay(pdev->subordinate); - if (!delay) - return; - - dev_dbg(&pdev->dev, "waiting downstream link for %d ms\n", delay); - - /* - * If downstream port does not support speeds greater than 5 GT/s - * need to wait 100ms. For higher speeds (gen3) we need to wait - * first for the data link layer to become active. - */ - if (pcie_get_speed_cap(pdev) <= PCIE_SPEED_5_0GT) - msleep(delay); - else - pcie_wait_for_link_delay(pdev, true, delay); -} - /** * pcie_port_device_suspend - suspend port services associated with a PCIe port * @dev: PCI Express port to handle @@ -453,8 +391,6 @@ int pcie_port_device_suspend(struct device *dev) int pcie_port_device_resume_noirq(struct device *dev) { size_t off = offsetof(struct pcie_port_service_driver, resume_noirq); - - wait_for_downstream_link(to_pci_dev(dev)); return device_for_each_child(dev, &off, pm_iter); } @@ -485,8 +421,6 @@ int pcie_port_device_runtime_suspend(struct device *dev) int pcie_port_device_runtime_resume(struct device *dev) { size_t off = offsetof(struct pcie_port_service_driver, runtime_resume); - - wait_for_downstream_link(to_pci_dev(dev)); return device_for_each_child(dev, &off, pm_iter); } #endif /* PM */ -- 2.21.0