From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001 From: Nicolas Saenz Julienne Date: Tue, 10 Mar 2020 13:52:41 +0100 Subject: [PATCH] PCI: brcmstb: Wait for Raspberry Pi's firmware when present xHCI's PCI fixup, run at the end of pcie-brcmstb's probe, depends on RPi4's VideoCore firmware interface to be up and running. It's possible for both initializations to race, so make sure it's available prior to starting. Signed-off-by: Nicolas Saenz Julienne Reviewed-by: Florian Fainelli --- drivers/pci/controller/pcie-brcmstb.c | 15 +++++++++++++++ 1 file changed, 15 insertions(+) diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c index 6d79d14527a6..aee84679a997 100644 --- a/drivers/pci/controller/pcie-brcmstb.c +++ b/drivers/pci/controller/pcie-brcmstb.c @@ -28,6 +28,8 @@ #include #include +#include + #include "../pci.h" /* BRCM_PCIE_CAP_REGS - Offset for the mandatory capability config regs */ @@ -917,11 +919,24 @@ static int brcm_pcie_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node, *msi_np; struct pci_host_bridge *bridge; + struct device_node *fw_np; struct brcm_pcie *pcie; struct pci_bus *child; struct resource *res; int ret; + /* + * We have to wait for the Raspberry Pi's firmware interface to be up + * as some PCI fixups depend on it. + */ + fw_np = of_find_compatible_node(NULL, NULL, + "raspberrypi,bcm2835-firmware"); + if (fw_np && !rpi_firmware_get(fw_np)) { + of_node_put(fw_np); + return -EPROBE_DEFER; + } + of_node_put(fw_np); + bridge = devm_pci_alloc_host_bridge(&pdev->dev, sizeof(*pcie)); if (!bridge) return -ENOMEM; -- 2.26.2