From 614b7d7d7b10d8e3f146bed311215f818be5accd Mon Sep 17 00:00:00 2001 From: "Justin M. Forbes" Date: Wed, 10 Jun 2020 17:15:58 -0500 Subject: Initial 5.7.2 rebase Signed-off-by: Justin M. Forbes --- usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch | 53 ----------------------- 1 file changed, 53 deletions(-) delete mode 100644 usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch (limited to 'usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch') diff --git a/usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch b/usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch deleted file mode 100644 index 2a44851d7..000000000 --- a/usb-phy-tegra-Add-38.4MHz-clock-table-entry.patch +++ /dev/null @@ -1,53 +0,0 @@ -From patchwork Wed Apr 6 07:54:05 2016 -Content-Type: text/plain; charset="utf-8" -MIME-Version: 1.0 -Content-Transfer-Encoding: 7bit -Subject: usb: phy: tegra: Add 38.4MHz clock table entry -From: Hunter Laux -X-Patchwork-Id: 606877 -Message-Id: <1459929245-23449-1-git-send-email-hunterlaux@gmail.com> -To: Stephen Warren , - Thierry Reding , - Alexandre Courbot , linux-tegra@vger.kernel.org -Cc: Hunter Laux -Date: Wed, 6 Apr 2016 00:54:05 -0700 - -The Tegra210 uses a 38.4MHz OSC. This clock table entry is required to -use the ehci phy on the Jetson TX1. - -The xtal_freq_count is actually a 12 bit value, so it should be a u16 -instead of u8. - -Signed-off-by: Hunter Laux ---- - drivers/usb/phy/phy-tegra-usb.c | 10 +++++++++- - 1 file changed, 9 insertions(+), 1 deletion(-) - -diff --git a/drivers/usb/phy/phy-tegra-usb.c b/drivers/usb/phy/phy-tegra-usb.c -index 5fe4a57..f0431f0 100644 ---- a/drivers/usb/phy/phy-tegra-usb.c -+++ b/drivers/usb/phy/phy-tegra-usb.c -@@ -164,7 +164,7 @@ struct tegra_xtal_freq { - u8 enable_delay; - u8 stable_count; - u8 active_delay; -- u8 xtal_freq_count; -+ u16 xtal_freq_count; - u16 debounce; - }; - -@@ -201,6 +201,14 @@ static const struct tegra_xtal_freq tegra_freq_table[] = { - .xtal_freq_count = 0xFE, - .debounce = 0xFDE8, - }, -+ { -+ .freq = 38400000, -+ .enable_delay = 0x00, -+ .stable_count = 0x00, -+ .active_delay = 0x18, -+ .xtal_freq_count = 0x177, -+ .debounce = 0xBB80, -+ }, - }; - - static void set_pts(struct tegra_usb_phy *phy, u8 pts_val) -- cgit