From 0561e0bf0e459dd4b27a77670de838128b87bd0e Mon Sep 17 00:00:00 2001 From: "Justin M. Forbes" Date: Mon, 6 Apr 2020 13:56:22 -0500 Subject: Linux v5.6-11374-ga10c9c710f9e --- arm64-pinebook-fixes.patch | 429 --------------------------------------------- 1 file changed, 429 deletions(-) delete mode 100644 arm64-pinebook-fixes.patch (limited to 'arm64-pinebook-fixes.patch') diff --git a/arm64-pinebook-fixes.patch b/arm64-pinebook-fixes.patch deleted file mode 100644 index 410487293..000000000 --- a/arm64-pinebook-fixes.patch +++ /dev/null @@ -1,429 +0,0 @@ -From e7a6e6b0c6506a9f070dbfb2ca948770c47a1d78 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:30:57 -0600 -Subject: [PATCH 1/8] arm64: dts: allwinner: pinebook: Remove unused vcc3v3 - regulator - -This fixed regulator has no consumers, GPIOs, or other connections. -Remove it. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 7 ------- - 1 file changed, 7 deletions(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index 3d894b208901..ff32ca1a495e 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -63,13 +63,6 @@ lid_switch { - }; - }; - -- reg_vcc3v3: vcc3v3 { -- compatible = "regulator-fixed"; -- regulator-name = "vcc3v3"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- }; -- - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ --- -2.24.1 - -From 5eea216437eeff908d6d2942bf893fb77ebfc111 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:30:59 -0600 -Subject: [PATCH 2/8] arm64: dts: allwinner: pinebook: Sort device tree nodes - -The r_i2c node should come before r_rsb, and in any case should not -separate the axp803 node from its subnodes. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - .../boot/dts/allwinner/sun50i-a64-pinebook.dts | 16 ++++++++-------- - 1 file changed, 8 insertions(+), 8 deletions(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index ff32ca1a495e..77784f7b1da7 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -172,6 +172,14 @@ &pwm { - status = "okay"; - }; - -+/* The ANX6345 eDP-bridge is on r_i2c */ -+&r_i2c { -+ clock-frequency = <100000>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&r_i2c_pl89_pins>; -+ status = "okay"; -+}; -+ - &r_rsb { - status = "okay"; - -@@ -183,14 +191,6 @@ axp803: pmic@3a3 { - }; - }; - --/* The ANX6345 eDP-bridge is on r_i2c */ --&r_i2c { -- clock-frequency = <100000>; -- pinctrl-names = "default"; -- pinctrl-0 = <&r_i2c_pl89_pins>; -- status = "okay"; --}; -- - #include "axp803.dtsi" - - &ac_power_supply { --- -2.24.1 - -From 4bdf53ffc64e5c6738c942dcdc422d5ca8a2070a Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:31:00 -0600 -Subject: [PATCH 3/8] arm64: dts: allwinner: pinebook: Make simplefb more - consistent - -Boards generally reference the simplefb nodes from the SoC dtsi by -label, not by full path. simplefb_hdmi is already like this in the -Pinebook DTS. Update simplefb_lcd to match. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - .../arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 12 ++++++------ - 1 file changed, 6 insertions(+), 6 deletions(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index 77784f7b1da7..224bed65d008 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -41,12 +41,6 @@ backlight: backlight { - - chosen { - stdout-path = "serial0:115200n8"; -- -- framebuffer-lcd { -- panel-supply = <®_dc1sw>; -- dvdd25-supply = <®_dldo2>; -- dvdd12-supply = <®_fldo1>; -- }; - }; - - gpio_keys { -@@ -316,6 +310,12 @@ ®_rtc_ldo { - regulator-name = "vcc-rtc"; - }; - -+&simplefb_lcd { -+ panel-supply = <®_dc1sw>; -+ dvdd25-supply = <®_dldo2>; -+ dvdd12-supply = <®_fldo1>; -+}; -+ - &simplefb_hdmi { - vcc-hdmi-supply = <®_dldo1>; - }; --- -2.24.1 - -From c0f416de7141bbc713f080ad123b256f6320ec92 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:31:01 -0600 -Subject: [PATCH 4/8] arm64: dts: allwinner: pinebook: Document MMC0 CD pin - name - -Normally GPIO pin references are followed by a comment giving the pin -name for searchability. Add the comment here where it was missing. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index 224bed65d008..a1e15777d524 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -119,7 +119,7 @@ &mmc0 { - pinctrl-names = "default"; - pinctrl-0 = <&mmc0_pins>; - vmmc-supply = <®_dcdc1>; -- cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */ - disable-wp; - bus-width = <4>; - status = "okay"; --- -2.24.1 - -From 8818d55ec31fa6e0dc14fb7a4924b3e8d3ecef7d Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:31:02 -0600 -Subject: [PATCH 5/8] arm64: dts: allwinner: pinebook: Add GPIO port regulators - -Allwinner A64 SoC has separate supplies for PC, PD, PE, PG and PL. - -VCC-PC and VCC-PG are supplied by ELDO1 at 1.8v. -VCC-PD is supplied by DCDC1 (VCC-IO) at 3.3v. -VCC-PE is supplied by ALDO1, and is unused. - -VCC-PL creates a circular dependency, so it is omitted for now. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - .../boot/dts/allwinner/sun50i-a64-pinebook.dts | 17 +++++++++++++++++ - 1 file changed, 17 insertions(+) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index a1e15777d524..1ec39120323f 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -162,6 +162,13 @@ &ohci1 { - status = "okay"; - }; - -+&pio { -+ vcc-pc-supply = <®_eldo1>; -+ vcc-pd-supply = <®_dcdc1>; -+ vcc-pe-supply = <®_aldo1>; -+ vcc-pg-supply = <®_eldo1>; -+}; -+ - &pwm { - status = "okay"; - }; -@@ -174,6 +181,16 @@ &r_i2c { - status = "okay"; - }; - -+&r_pio { -+ /* -+ * FIXME: We can't add that supply for now since it would -+ * create a circular dependency between pinctrl, the regulator -+ * and the RSB Bus. -+ * -+ * vcc-pl-supply = <®_aldo2>; -+ */ -+}; -+ - &r_rsb { - status = "okay"; - --- -2.24.1 - -From bd863f25d41173e140850772f9a02ffb3b3e0d6b Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:31:03 -0600 -Subject: [PATCH 6/8] arm64: dts: allwinner: pinebook: Fix backlight regulator - -The output from the backlight regulator is labeled as "VBKLT" in the -schematic. Using the equation and resistor values from the schematic, -the output is approximately 18V, not 3.3V. Since the regulator in use -(SS6640STR) is a boost regulator powered by PS (battery or AC input), -which are both >3.3V, the output could not be 3.3V anyway. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - .../dts/allwinner/sun50i-a64-pinebook.dts | 20 +++++++++---------- - 1 file changed, 10 insertions(+), 10 deletions(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index 1ec39120323f..313f4e6edc19 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -21,22 +21,13 @@ aliases { - ethernet0 = &rtl8723cs; - }; - -- vdd_bl: regulator@0 { -- compatible = "regulator-fixed"; -- regulator-name = "bl-3v3"; -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ -- enable-active-high; -- }; -- - backlight: backlight { - compatible = "pwm-backlight"; - pwms = <&pwm 0 50000 0>; - brightness-levels = <0 5 10 15 20 30 40 55 70 85 100>; - default-brightness-level = <2>; - enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ -- power-supply = <&vdd_bl>; -+ power-supply = <®_vbklt>; - }; - - chosen { -@@ -57,6 +48,15 @@ lid_switch { - }; - }; - -+ reg_vbklt: vbklt { -+ compatible = "regulator-fixed"; -+ regulator-name = "vbklt"; -+ regulator-min-microvolt = <18000000>; -+ regulator-max-microvolt = <18000000>; -+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ -+ enable-active-high; -+ }; -+ - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ --- -2.24.1 - -From 425472eb612873c9c64b41df70020de58448bef3 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:31:04 -0600 -Subject: [PATCH 7/8] arm64: dts: allwinner: pinebook: Fix 5v0 boost regulator - -Now that AXP803 GPIO support is available, we can properly model -the hardware. Replace the use of GPIO0-LDO with a fixed regulator -controlled by GPIO0. This boost regulator is used to power the -(internal and external) USB ports, as well as the speakers. - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - .../dts/allwinner/sun50i-a64-pinebook.dts | 27 +++++++++---------- - 1 file changed, 12 insertions(+), 15 deletions(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index 313f4e6edc19..c06c540e6c08 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -57,6 +57,15 @@ reg_vbklt: vbklt { - enable-active-high; - }; - -+ reg_vcc5v0: vcc5v0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc5v0"; -+ regulator-min-microvolt = <5000000>; -+ regulator-max-microvolt = <5000000>; -+ gpio = <&axp_gpio 0 GPIO_ACTIVE_HIGH>; -+ enable-active-high; -+ }; -+ - wifi_pwrseq: wifi_pwrseq { - compatible = "mmc-pwrseq-simple"; - reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ -@@ -64,12 +73,7 @@ wifi_pwrseq: wifi_pwrseq { - - speaker_amp: audio-amplifier { - compatible = "simple-audio-amplifier"; -- /* -- * TODO This is actually a fixed regulator controlled by -- * the GPIO line on the PMIC. This should be corrected -- * once GPIO support is added for this PMIC. -- */ -- VCC-supply = <®_ldo_io0>; -+ VCC-supply = <®_vcc5v0>; - enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ - sound-name-prefix = "Speaker Amp"; - }; -@@ -316,13 +320,6 @@ ®_fldo2 { - regulator-name = "vdd-cpus"; - }; - --®_ldo_io0 { -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- regulator-name = "vcc-usb"; -- status = "okay"; --}; -- - ®_rtc_ldo { - regulator-name = "vcc-rtc"; - }; -@@ -371,7 +368,7 @@ &usb_otg { - }; - - &usbphy { -- usb0_vbus-supply = <®_ldo_io0>; -- usb1_vbus-supply = <®_ldo_io0>; -+ usb0_vbus-supply = <®_vcc5v0>; -+ usb1_vbus-supply = <®_vcc5v0>; - status = "okay"; - }; --- -2.24.1 - -From c3aea4ea2117f5dc28da3d4175fc93296653ecd5 Mon Sep 17 00:00:00 2001 -From: Samuel Holland -Date: Sun, 19 Jan 2020 10:30:58 -0600 -Subject: [PATCH 8/8] arm64: dts: allwinner: pinebook: Remove unused AXP803 - regulators - -The Pinebook does not use the CSI bus on the A64. In fact it does not -use GPIO port E for anything at all. Thus the following regulators are -not used and do not need voltages set: - - - ALDO1: Connected to VCC-PE only - - DLDO3: Not connected - - ELDO3: Not connected - -Signed-off-by: Samuel Holland -Signed-off-by: Maxime Ripard ---- - .../boot/dts/allwinner/sun50i-a64-pinebook.dts | 16 +--------------- - 1 file changed, 1 insertion(+), 15 deletions(-) - -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -index c06c540e6c08..12e513ba8f50 100644 ---- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinebook.dts -@@ -217,9 +217,7 @@ &battery_power_supply { - }; - - ®_aldo1 { -- regulator-min-microvolt = <2800000>; -- regulator-max-microvolt = <2800000>; -- regulator-name = "vcc-csi"; -+ regulator-name = "vcc-pe"; - }; - - ®_aldo2 { -@@ -282,12 +280,6 @@ ®_dldo2 { - regulator-name = "vcc-edp"; - }; - --®_dldo3 { -- regulator-min-microvolt = <3300000>; -- regulator-max-microvolt = <3300000>; -- regulator-name = "avdd-csi"; --}; -- - ®_dldo4 { - regulator-min-microvolt = <3300000>; - regulator-max-microvolt = <3300000>; -@@ -301,12 +293,6 @@ ®_eldo1 { - regulator-name = "cpvdd"; - }; - --®_eldo3 { -- regulator-min-microvolt = <1800000>; -- regulator-max-microvolt = <1800000>; -- regulator-name = "vdd-1v8-csi"; --}; -- - ®_fldo1 { - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; --- -2.24.1 - -- cgit