From 0561e0bf0e459dd4b27a77670de838128b87bd0e Mon Sep 17 00:00:00 2001 From: "Justin M. Forbes" Date: Mon, 6 Apr 2020 13:56:22 -0500 Subject: Linux v5.6-11374-ga10c9c710f9e --- arm64-pine64-pinetab.patch | 583 --------------------------------------------- 1 file changed, 583 deletions(-) delete mode 100644 arm64-pine64-pinetab.patch (limited to 'arm64-pine64-pinetab.patch') diff --git a/arm64-pine64-pinetab.patch b/arm64-pine64-pinetab.patch deleted file mode 100644 index cafbc71bd..000000000 --- a/arm64-pine64-pinetab.patch +++ /dev/null @@ -1,583 +0,0 @@ -From e15d9c7cb74033f668c19a65abfd77ed7331f91e Mon Sep 17 00:00:00 2001 -From: Icenowy Zheng -Date: Thu, 16 Jan 2020 11:36:35 +0800 -Subject: [PATCH 1/2] dt-bindings: arm: sunxi: add binding for PineTab tablet - -Add the device tree binding for Pine64's PineTab tablet, which uses -Allwinner A64 SoC. - -Signed-off-by: Icenowy Zheng -Reviewed-by: Rob Herring -Signed-off-by: Maxime Ripard ---- - Documentation/devicetree/bindings/arm/sunxi.yaml | 5 +++++ - 1 file changed, 5 insertions(+) - -diff --git a/Documentation/devicetree/bindings/arm/sunxi.yaml b/Documentation/devicetree/bindings/arm/sunxi.yaml -index 327ce6730823..159060b65c5d 100644 ---- a/Documentation/devicetree/bindings/arm/sunxi.yaml -+++ b/Documentation/devicetree/bindings/arm/sunxi.yaml -@@ -636,6 +636,11 @@ properties: - - const: pine64,pinebook - - const: allwinner,sun50i-a64 - -+ - description: Pine64 PineTab -+ items: -+ - const: pine64,pinetab -+ - const: allwinner,sun50i-a64 -+ - - description: Pine64 SoPine Baseboard - items: - - const: pine64,sopine-baseboard --- -2.24.1 - -From d7b56d337bb980f0b996958ec6808253c4f50771 Mon Sep 17 00:00:00 2001 -From: Icenowy Zheng -Date: Thu, 16 Jan 2020 11:36:36 +0800 -Subject: [PATCH 2/2] arm64: dts: allwinner: a64: add support for PineTab - -PineTab is a 10.1" tablet by Pine64 with Allwinner A64 inside. - -It includes the following peripherals: - -USB: -- A microUSB Type-B port connected to the OTG-capable USB PHY of -Allwinner A64. The ID pin is connected to a GPIO of the A64 SoC, and the -Vbus is connected to the Vbus of AXP803 PMIC. These enables OTG -functionality on this port. -- A USB Type-A port is connected to the internal hub attached to the -non-OTG USB PHY of Allwinner A64. -- There are reserved pins for an external keyboard connected to the -internal hub. - -Power: -- The microUSB port has its Vbus connected to AXP803, mentioned above. -- A DC jack (of a strange size, 2.5mm outer diameter) is connected to -the ACIN of AXP803. -- A Li-Polymer battery is connected to the battery pins of AXP803. - -Storage: -- An tradition Pine64 eMMC slot is on the board, mounted with an eMMC -module by factory. -- An external microSD slot is hidden under a protect case. - -Display: -- A MIPI-DSI LCD panel (800x1280) is connected to the DSI port of A64 SoC. -- A mini HDMI port. - -Input: -- A touch panel attached to a Goodix GT9271 touch controller. -- Volume keys connected to the LRADC of the A64 SoC. - -Camera: -- An OV5640 CMOS camera is at rear, connected to the CSI bus of A64 SoC. -- A GC2145 CMOS camera is at front, shares the same CSI bus with OV5640. - -Audio: -- A headphone jack is conencted to the SoC's internal codec. -- A speaker connected is to the Line Out port of SoC's internal codec, via -an amplifier. - -Misc: -- Debug UART is muxed with the headphone jack, with the switch next to -the microSD slot. -- A bosch BMA223 accelerometer is connected to the I2C bus of A64 SoC. -- Wi-Fi and Bluetooth are available via a RTL8723CS chip, similar to the -one in Pinebook. - -This commit adds a basically usable device tree for it, implementing -most of the features mentioned above. HDMI is not supported now because -bad LCD-HDMI coexistence situation of mainline A64 display driver, the -front camera currently lacks a driver and a facility to share the bus -with the rear one, and the accelerometer currently lacks a DT binding. - -Signed-off-by: Icenowy Zheng -Signed-off-by: Maxime Ripard ---- - arch/arm64/boot/dts/allwinner/Makefile | 1 + - .../boot/dts/allwinner/sun50i-a64-pinetab.dts | 460 ++++++++++++++++++ - 2 files changed, 461 insertions(+) - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts - -diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile -index cf4f78617c3f..6dad63881cd3 100644 ---- a/arch/arm64/boot/dts/allwinner/Makefile -+++ b/arch/arm64/boot/dts/allwinner/Makefile -@@ -9,6 +9,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-orangepi-win.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-lts.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinebook.dtb -+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pinetab.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-sopine-baseboard.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-teres-i.dtb - dtb-$(CONFIG_ARCH_SUNXI) += sun50i-h5-bananapi-m2-plus.dtb -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts -new file mode 100644 -index 000000000000..316e8a443913 ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinetab.dts -@@ -0,0 +1,460 @@ -+// SPDX-License-Identifier: (GPL-2.0+ OR MIT) -+/* -+ * Copyright (C) 2019 Icenowy Zheng -+ * -+ */ -+ -+/dts-v1/; -+ -+#include "sun50i-a64.dtsi" -+#include "sun50i-a64-cpu-opp.dtsi" -+ -+#include -+#include -+#include -+ -+/ { -+ model = "PineTab"; -+ compatible = "pine64,pinetab", "allwinner,sun50i-a64"; -+ -+ aliases { -+ serial0 = &uart0; -+ ethernet0 = &rtl8723cs; -+ }; -+ -+ backlight: backlight { -+ compatible = "pwm-backlight"; -+ pwms = <&pwm 0 50000 PWM_POLARITY_INVERTED>; -+ brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>; -+ default-brightness-level = <15>; -+ enable-gpios = <&pio 3 23 GPIO_ACTIVE_HIGH>; /* PD23 */ -+ power-supply = <&vdd_bl>; -+ }; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ i2c-csi { -+ compatible = "i2c-gpio"; -+ sda-gpios = <&pio 4 13 GPIO_ACTIVE_HIGH>; /* PE13 */ -+ scl-gpios = <&pio 4 12 GPIO_ACTIVE_HIGH>; /* PE12 */ -+ i2c-gpio,delay-us = <5>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ /* Rear camera */ -+ ov5640: camera@3c { -+ compatible = "ovti,ov5640"; -+ reg = <0x3c>; -+ pinctrl-names = "default"; -+ pinctrl-0 = <&csi_mclk_pin>; -+ clocks = <&ccu CLK_CSI_MCLK>; -+ clock-names = "xclk"; -+ -+ AVDD-supply = <®_dldo3>; -+ DOVDD-supply = <®_aldo1>; -+ DVDD-supply = <®_eldo3>; -+ reset-gpios = <&pio 4 14 GPIO_ACTIVE_LOW>; /* PE14 */ -+ powerdown-gpios = <&pio 4 15 GPIO_ACTIVE_HIGH>; /* PE15 */ -+ -+ port { -+ ov5640_ep: endpoint { -+ remote-endpoint = <&csi_ep>; -+ bus-width = <8>; -+ hsync-active = <1>; /* Active high */ -+ vsync-active = <0>; /* Active low */ -+ data-active = <1>; /* Active high */ -+ pclk-sample = <1>; /* Rising */ -+ }; -+ }; -+ }; -+ }; -+ -+ speaker_amp: audio-amplifier { -+ compatible = "simple-audio-amplifier"; -+ enable-gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; /* PH7 */ -+ sound-name-prefix = "Speaker Amp"; -+ }; -+ -+ vdd_bl: regulator@0 { -+ compatible = "regulator-fixed"; -+ regulator-name = "bl-3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; /* PH6 */ -+ enable-active-high; -+ }; -+ -+ wifi_pwrseq: wifi_pwrseq { -+ compatible = "mmc-pwrseq-simple"; -+ reset-gpios = <&r_pio 0 2 GPIO_ACTIVE_LOW>; /* PL2 */ -+ post-power-on-delay-ms = <200>; -+ }; -+}; -+ -+&codec { -+ status = "okay"; -+}; -+ -+&codec_analog { -+ hpvcc-supply = <®_eldo1>; -+ status = "okay"; -+}; -+ -+&cpu0 { -+ cpu-supply = <®_dcdc2>; -+}; -+ -+&cpu1 { -+ cpu-supply = <®_dcdc2>; -+}; -+ -+&cpu2 { -+ cpu-supply = <®_dcdc2>; -+}; -+ -+&cpu3 { -+ cpu-supply = <®_dcdc2>; -+}; -+ -+&csi { -+ status = "okay"; -+ -+ port { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ csi_ep: endpoint { -+ remote-endpoint = <&ov5640_ep>; -+ bus-width = <8>; -+ hsync-active = <1>; /* Active high */ -+ vsync-active = <0>; /* Active low */ -+ data-active = <1>; /* Active high */ -+ pclk-sample = <1>; /* Rising */ -+ }; -+ }; -+}; -+ -+&dai { -+ status = "okay"; -+}; -+ -+&de { -+ status = "okay"; -+}; -+ -+&dphy { -+ status = "okay"; -+}; -+ -+&dsi { -+ vcc-dsi-supply = <®_dldo1>; -+ status = "okay"; -+ -+ panel@0 { -+ compatible = "feixin,k101-im2ba02"; -+ reg = <0>; -+ avdd-supply = <®_dc1sw>; -+ dvdd-supply = <®_dc1sw>; -+ cvdd-supply = <®_ldo_io1>; -+ reset-gpios = <&pio 3 24 GPIO_ACTIVE_HIGH>; /* PD24 */ -+ backlight = <&backlight>; -+ }; -+}; -+ -+&ehci0 { -+ status = "okay"; -+}; -+ -+&ehci1 { -+ status = "okay"; -+}; -+ -+&i2c0 { -+ status = "okay"; -+ -+ touchscreen@5d { -+ compatible = "goodix,gt9271"; -+ reg = <0x5d>; -+ interrupt-parent = <&pio>; -+ interrupts = <7 4 IRQ_TYPE_LEVEL_HIGH>; /* PH4 */ -+ irq-gpios = <&pio 7 4 GPIO_ACTIVE_HIGH>; /* PH4 */ -+ reset-gpios = <&pio 7 8 GPIO_ACTIVE_HIGH>; /* PH8 */ -+ AVDD28-supply = <®_ldo_io1>; -+ }; -+}; -+ -+&i2c0_pins { -+ bias-pull-up; -+}; -+ -+&i2c1 { -+ status = "okay"; -+ -+ /* TODO: add Bochs BMA223 accelerometer here */ -+}; -+ -+&lradc { -+ vref-supply = <®_aldo3>; -+ status = "okay"; -+ -+ button-200 { -+ label = "Volume Up"; -+ linux,code = ; -+ channel = <0>; -+ voltage = <200000>; -+ }; -+ -+ button-400 { -+ label = "Volume Down"; -+ linux,code = ; -+ channel = <0>; -+ voltage = <400000>; -+ }; -+}; -+ -+&mixer1 { -+ status = "okay"; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins>; -+ vmmc-supply = <®_dcdc1>; -+ cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; -+ disable-wp; -+ bus-width = <4>; -+ status = "okay"; -+}; -+ -+&mmc1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc1_pins>; -+ vmmc-supply = <®_dldo4>; -+ vqmmc-supply = <®_eldo1>; -+ mmc-pwrseq = <&wifi_pwrseq>; -+ bus-width = <4>; -+ non-removable; -+ status = "okay"; -+ -+ rtl8723cs: wifi@1 { -+ reg = <1>; -+ }; -+}; -+ -+&mmc2 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc2_pins>; -+ vmmc-supply = <®_dcdc1>; -+ vqmmc-supply = <®_dcdc1>; -+ bus-width = <8>; -+ non-removable; -+ cap-mmc-hw-reset; -+ status = "okay"; -+}; -+ -+&ohci0 { -+ status = "okay"; -+}; -+ -+&pwm { -+ status = "okay"; -+}; -+ -+&r_rsb { -+ status = "okay"; -+ -+ axp803: pmic@3a3 { -+ compatible = "x-powers,axp803"; -+ reg = <0x3a3>; -+ interrupt-parent = <&r_intc>; -+ interrupts = <0 IRQ_TYPE_LEVEL_LOW>; -+ x-powers,drive-vbus-en; -+ }; -+}; -+ -+#include "axp803.dtsi" -+ -+&ac_power_supply { -+ status = "okay"; -+}; -+ -+&battery_power_supply { -+ status = "okay"; -+}; -+ -+®_aldo1 { -+ regulator-min-microvolt = <2800000>; -+ regulator-max-microvolt = <2800000>; -+ regulator-name = "dovdd-csi"; -+}; -+ -+®_aldo2 { -+ regulator-always-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-pl"; -+}; -+ -+®_aldo3 { -+ regulator-always-on; -+ regulator-min-microvolt = <2700000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-pll-avcc"; -+}; -+ -+®_dc1sw { -+ regulator-name = "vcc-lcd"; -+}; -+ -+®_dcdc1 { -+ regulator-always-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-3v3"; -+}; -+ -+®_dcdc2 { -+ regulator-always-on; -+ regulator-min-microvolt = <1000000>; -+ regulator-max-microvolt = <1300000>; -+ regulator-name = "vdd-cpux"; -+}; -+ -+/* DCDC3 is polyphased with DCDC2 */ -+ -+®_dcdc5 { -+ regulator-always-on; -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1200000>; -+ regulator-name = "vcc-dram"; -+}; -+ -+®_dcdc6 { -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1100000>; -+ regulator-name = "vdd-sys"; -+}; -+ -+®_dldo1 { -+ regulator-always-on; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-hdmi-dsi-sensor"; -+}; -+ -+®_dldo3 { -+ regulator-min-microvolt = <2800000>; -+ regulator-max-microvolt = <2800000>; -+ regulator-name = "avdd-csi"; -+}; -+ -+®_dldo4 { -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-wifi"; -+}; -+ -+®_drivevbus { -+ regulator-name = "usb0-vbus"; -+ status = "okay"; -+}; -+ -+®_eldo1 { -+ regulator-always-on; -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-name = "cpvdd"; -+}; -+ -+®_eldo2 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-name = "vcca-1v8"; -+}; -+ -+®_eldo3 { -+ regulator-min-microvolt = <1800000>; -+ regulator-max-microvolt = <1800000>; -+ regulator-name = "dvdd-1v8-csi"; -+}; -+ -+®_fldo1 { -+ regulator-min-microvolt = <1200000>; -+ regulator-max-microvolt = <1200000>; -+ regulator-name = "vcc-1v2-hsic"; -+}; -+ -+®_fldo2 { -+ regulator-always-on; -+ regulator-min-microvolt = <1100000>; -+ regulator-max-microvolt = <1100000>; -+ regulator-name = "vdd-cpus"; -+}; -+ -+®_ldo_io0 { -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-name = "vcc-usb"; -+ status = "okay"; -+}; -+ -+®_ldo_io1 { -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ regulator-enable-ramp-delay = <3500000>; -+ regulator-name = "vcc-touchscreen"; -+ status = "okay"; -+}; -+ -+®_rtc_ldo { -+ regulator-name = "vcc-rtc"; -+}; -+ -+&sound { -+ status = "okay"; -+ simple-audio-card,aux-devs = <&codec_analog>, <&speaker_amp>; -+ simple-audio-card,widgets = "Microphone", "Internal Microphone Left", -+ "Microphone", "Internal Microphone Right", -+ "Headphone", "Headphone Jack", -+ "Speaker", "Internal Speaker"; -+ simple-audio-card,routing = -+ "Left DAC", "AIF1 Slot 0 Left", -+ "Right DAC", "AIF1 Slot 0 Right", -+ "Speaker Amp INL", "LINEOUT", -+ "Speaker Amp INR", "LINEOUT", -+ "Internal Speaker", "Speaker Amp OUTL", -+ "Internal Speaker", "Speaker Amp OUTR", -+ "Headphone Jack", "HP", -+ "AIF1 Slot 0 Left ADC", "Left ADC", -+ "AIF1 Slot 0 Right ADC", "Right ADC", -+ "Internal Microphone Left", "MBIAS", -+ "MIC1", "Internal Microphone Left", -+ "Internal Microphone Right", "HBIAS", -+ "MIC2", "Internal Microphone Right"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pb_pins>; -+ status = "okay"; -+}; -+ -+&usb_otg { -+ dr_mode = "otg"; -+ status = "okay"; -+}; -+ -+&usb_power_supply { -+ status = "okay"; -+}; -+ -+&usbphy { -+ usb0_id_det-gpios = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ -+ usb0_vbus_power-supply = <&usb_power_supply>; -+ usb0_vbus-supply = <®_drivevbus>; -+ usb1_vbus-supply = <®_ldo_io0>; -+ status = "okay"; -+}; --- -2.24.1 - -- cgit