From 769351a2f4cf5ef670e5108efce71f4cea68231c Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Sun, 28 Aug 2016 23:37:46 +0100 Subject: Minor ARM updates --- Initial-AllWinner-A64-and-PINE64-support.patch | 1200 ------------------------ bcm283x-upstream-fixes.patch | 28 - config-arm64 | 1 + config-armv7-generic | 4 +- kernel.spec | 7 +- 5 files changed, 6 insertions(+), 1234 deletions(-) delete mode 100644 Initial-AllWinner-A64-and-PINE64-support.patch diff --git a/Initial-AllWinner-A64-and-PINE64-support.patch b/Initial-AllWinner-A64-and-PINE64-support.patch deleted file mode 100644 index 966275a8f..000000000 --- a/Initial-AllWinner-A64-and-PINE64-support.patch +++ /dev/null @@ -1,1200 +0,0 @@ -From 97f002d28e975991226ab70599731bd2ccc8c060 Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Sun, 6 Mar 2016 12:06:41 +0000 -Subject: [PATCH] Initial AllWinner A64 and PINE64 support - ---- - Documentation/devicetree/bindings/arm/sunxi.txt | 1 + - Documentation/devicetree/bindings/clock/sunxi.txt | 7 + - .../devicetree/bindings/vendor-prefixes.txt | 1 + - arch/arm/boot/dts/sun8i-h3.dtsi | 18 +- - arch/arm/mach-sunxi/Kconfig | 7 + - arch/arm64/Kconfig.platforms | 6 + - arch/arm64/boot/dts/Makefile | 1 + - arch/arm64/boot/dts/allwinner/Makefile | 5 + - .../dts/allwinner/sun50i-a64-pine64-common.dtsi | 80 +++ - .../boot/dts/allwinner/sun50i-a64-pine64-plus.dts | 59 ++ - .../arm64/boot/dts/allwinner/sun50i-a64-pine64.dts | 58 ++ - arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi | 624 +++++++++++++++++++++ - drivers/clk/sunxi/Makefile | 1 + - drivers/clk/sunxi/clk-factors.c | 3 +- - drivers/clk/sunxi/clk-factors.h | 1 + - drivers/clk/sunxi/clk-multi-gates.c | 105 ++++ - drivers/clk/sunxi/clk-sunxi.c | 4 +- - drivers/crypto/Kconfig | 2 +- - 23 files changed, 1582 insertions(+), 16 deletions(-) - create mode 100644 arch/arm64/boot/dts/allwinner/Makefile - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts - create mode 100644 arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi - create mode 100644 drivers/clk/sunxi/clk-multi-gates.c - create mode 100644 drivers/pinctrl/sunxi/pinctrl-sun50i-a64.c - -diff --git a/Documentation/devicetree/bindings/arm/sunxi.txt b/Documentation/devicetree/bindings/arm/sunxi.txt -index bb9b0faa..8b39d2b 100644 ---- a/Documentation/devicetree/bindings/arm/sunxi.txt -+++ b/Documentation/devicetree/bindings/arm/sunxi.txt -@@ -13,3 +13,4 @@ using one of the following compatible strings: - allwinner,sun8i-a83t - allwinner,sun8i-h3 - allwinner,sun9i-a80 -+ allwinner,sun50i-a64 -diff --git a/Documentation/devicetree/bindings/clock/sunxi.txt b/Documentation/devicetree/bindings/clock/sunxi.txt -index e59f57b..8af12b5 100644 ---- a/Documentation/devicetree/bindings/clock/sunxi.txt -+++ b/Documentation/devicetree/bindings/clock/sunxi.txt -@@ -77,6 +77,8 @@ Required properties: - "allwinner,sun9i-a80-usb-mod-clk" - for usb gates + resets on A80 - "allwinner,sun9i-a80-usb-phy-clk" - for usb phy gates + resets on A80 - "allwinner,sun4i-a10-ve-clk" - for the Video Engine clock -+ "allwinner,sunxi-multi-bus-gates-clk" - for the multi-parent bus gates -+ "allwinner,sun50i-a64-bus-gates-clk" - for the bus gates on A64 - - Required properties for all clocks: - - reg : shall be the control register address for the clock. -@@ -117,6 +119,11 @@ For "allwinner,sun6i-a31-pll6-clk", there are 2 outputs. The first output - is the normal PLL6 output, or "pll6". The second output is rate doubled - PLL6, or "pll6x2". - -+The "allwinner,sunxi-multi-bus-gates-clk" holds the actual clocks in -+child nodes, where each one specifies the parent clock that the particular -+gates are depending from. The child nodes each follow the common clock -+binding as described in this document. -+ - The "allwinner,*-mmc-clk" clocks have three different outputs: the - main clock, with the ID 0, and the output and sample clocks, with the - IDs 1 and 2, respectively. -diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt -index 72e2c5a..0c22fa9 100644 ---- a/Documentation/devicetree/bindings/vendor-prefixes.txt -+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt -@@ -175,6 +175,7 @@ parade Parade Technologies Inc. - pericom Pericom Technology Inc. - phytec PHYTEC Messtechnik GmbH - picochip Picochip Ltd -+pine64 Pine64 - plathome Plat'Home Co., Ltd. - plda PLDA - pixcir PIXCIR MICROELECTRONICS Co., Ltd -diff --git a/arch/arm/boot/dts/sun8i-h3.dtsi b/arch/arm/boot/dts/sun8i-h3.dtsi -index 1524130e..7c50fa0 100644 ---- a/arch/arm/boot/dts/sun8i-h3.dtsi -+++ b/arch/arm/boot/dts/sun8i-h3.dtsi -@@ -137,12 +137,12 @@ - clock-output-names = "pll6d2"; - }; - -- /* dummy clock until pll6 can be reused */ -- pll8: pll8_clk { -- #clock-cells = <0>; -- compatible = "fixed-clock"; -- clock-frequency = <1>; -- clock-output-names = "pll8"; -+ pll8: clk@c01c20044 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun6i-a31-pll6-clk"; -+ reg = <0x01c20044 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll8", "pll8x2"; - }; - - cpu: cpu_clk@01c20050 { -@@ -243,7 +243,7 @@ - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20088 0x4>; -- clocks = <&osc24M>, <&pll6 0>, <&pll8>; -+ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; - clock-output-names = "mmc0", - "mmc0_output", - "mmc0_sample"; -@@ -253,7 +253,7 @@ - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c2008c 0x4>; -- clocks = <&osc24M>, <&pll6 0>, <&pll8>; -+ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; - clock-output-names = "mmc1", - "mmc1_output", - "mmc1_sample"; -@@ -263,7 +263,7 @@ - #clock-cells = <1>; - compatible = "allwinner,sun4i-a10-mmc-clk"; - reg = <0x01c20090 0x4>; -- clocks = <&osc24M>, <&pll6 0>, <&pll8>; -+ clocks = <&osc24M>, <&pll6 0>, <&pll8 0>; - clock-output-names = "mmc2", - "mmc2_output", - "mmc2_sample"; -diff --git a/arch/arm/mach-sunxi/Kconfig b/arch/arm/mach-sunxi/Kconfig -index c124d65..b305f5b 100644 ---- a/arch/arm/mach-sunxi/Kconfig -+++ b/arch/arm/mach-sunxi/Kconfig -@@ -46,4 +46,11 @@ config MACH_SUN9I - default ARCH_SUNXI - select ARM_GIC - -+config MACH_SUN50I -+ bool "Allwinner A64 (sun50i) SoCs support" -+ default ARCH_SUNXI -+ select ARM_GIC -+ select HAVE_ARM_ARCH_TIMER -+ select PINCTRL_SUN50I_A64 -+ - endif -diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms -index 21074f6..63a690d 100644 ---- a/arch/arm64/Kconfig.platforms -+++ b/arch/arm64/Kconfig.platforms -@@ -72,6 +72,12 @@ config ARCH_SEATTLE - config ARCH_SHMOBILE - bool - -+config ARCH_SUNXI -+ bool "Allwinner sunxi 64-bit SoC Family" -+ select PINCTRL_SUN50I_A64 -+ help -+ This enables support for Allwinner sunxi based SoCs like the A64. -+ - config ARCH_RENESAS - bool "Renesas SoC Platforms" - select ARCH_SHMOBILE -diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile -index f832b8a..3b7428a 100644 ---- a/arch/arm64/boot/dts/Makefile -+++ b/arch/arm64/boot/dts/Makefile -@@ -2,3 +2,4 @@ - dts-dirs += al -+dts-dirs += allwinner - dts-dirs += altera - dts-dirs += amd -diff --git a/arch/arm64/boot/dts/allwinner/Makefile b/arch/arm64/boot/dts/allwinner/Makefile -new file mode 100644 -index 0000000..1e29a5a ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/Makefile -@@ -0,0 +1,5 @@ -+dtb-$(CONFIG_ARCH_SUNXI) += sun50i-a64-pine64-plus.dtb sun50i-a64-pine64.dtb -+ -+always := $(dtb-y) -+subdir-y := $(dts-dirs) -+clean-files := *.dtb -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi -new file mode 100644 -index 0000000..d5a7249 ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-common.dtsi -@@ -0,0 +1,80 @@ -+/* -+ * Copyright (c) 2016 ARM Ltd. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include "sun50i-a64.dtsi" -+ -+/ { -+ -+ aliases { -+ serial0 = &uart0; -+ }; -+ -+ soc { -+ reg_vcc3v3: vcc3v3 { -+ compatible = "regulator-fixed"; -+ regulator-name = "vcc3v3"; -+ regulator-min-microvolt = <3300000>; -+ regulator-max-microvolt = <3300000>; -+ }; -+ }; -+}; -+ -+&mmc0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&mmc0_pins>, <&mmc0_default_cd_pin>; -+ vmmc-supply = <®_vcc3v3>; -+ cd-gpios = <&pio 5 6 0>; -+ cd-inverted; -+ status = "okay"; -+}; -+ -+&uart0 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&uart0_pins_a>; -+ status = "okay"; -+}; -+ -+&i2c1 { -+ pinctrl-names = "default"; -+ pinctrl-0 = <&i2c1_pins>; -+ status = "okay"; -+}; -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts -new file mode 100644 -index 0000000..549dc15 ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64-plus.dts -@@ -0,0 +1,59 @@ -+/* -+ * Copyright (c) 2016 ARM Ltd. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "sun50i-a64-pine64-common.dtsi" -+ -+/ { -+ model = "Pine64+"; -+ compatible = "pine64,pine64-plus", "allwinner,sun50i-a64"; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ /* There is a model with 2GB of DRAM, but U-Boot fixes this for us. */ -+ memory { -+ reg = <0x40000000 0x40000000>; -+ }; -+}; -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -new file mode 100644 -index 0000000..ebe029e ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pine64.dts -@@ -0,0 +1,58 @@ -+/* -+ * Copyright (c) 2016 ARM Ltd. -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This library is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This library is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+/dts-v1/; -+ -+#include "sun50i-a64-pine64-common.dtsi" -+ -+/ { -+ model = "Pine64"; -+ compatible = "pine64,pine64", "allwinner,sun50i-a64"; -+ -+ chosen { -+ stdout-path = "serial0:115200n8"; -+ }; -+ -+ memory { -+ reg = <0x40000000 0x20000000>; -+ }; -+}; -diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -new file mode 100644 -index 0000000..1bd436f ---- /dev/null -+++ b/arch/arm64/boot/dts/allwinner/sun50i-a64.dtsi -@@ -0,0 +1,624 @@ -+/* -+ * Copyright (C) 2016 ARM Ltd. -+ * based on the Allwinner H3 dtsi: -+ * Copyright (C) 2015 Jens Kuske -+ * -+ * This file is dual-licensed: you can use it either under the terms -+ * of the GPL or the X11 license, at your option. Note that this dual -+ * licensing only applies to this file, and not this project as a -+ * whole. -+ * -+ * a) This file is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License as -+ * published by the Free Software Foundation; either version 2 of the -+ * License, or (at your option) any later version. -+ * -+ * This file is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * Or, alternatively, -+ * -+ * b) Permission is hereby granted, free of charge, to any person -+ * obtaining a copy of this software and associated documentation -+ * files (the "Software"), to deal in the Software without -+ * restriction, including without limitation the rights to use, -+ * copy, modify, merge, publish, distribute, sublicense, and/or -+ * sell copies of the Software, and to permit persons to whom the -+ * Software is furnished to do so, subject to the following -+ * conditions: -+ * -+ * The above copyright notice and this permission notice shall be -+ * included in all copies or substantial portions of the Software. -+ * -+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, -+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES -+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND -+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT -+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, -+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING -+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR -+ * OTHER DEALINGS IN THE SOFTWARE. -+ */ -+ -+#include -+#include -+ -+/ { -+ interrupt-parent = <&gic>; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ -+ cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu@0 { -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ device_type = "cpu"; -+ reg = <0>; -+ enable-method = "psci"; -+ }; -+ -+ cpu@1 { -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ device_type = "cpu"; -+ reg = <1>; -+ enable-method = "psci"; -+ }; -+ -+ cpu@2 { -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ device_type = "cpu"; -+ reg = <2>; -+ enable-method = "psci"; -+ }; -+ -+ cpu@3 { -+ compatible = "arm,cortex-a53", "arm,armv8"; -+ device_type = "cpu"; -+ reg = <3>; -+ enable-method = "psci"; -+ }; -+ }; -+ -+ psci { -+ compatible = "arm,psci-0.2"; -+ method = "smc"; -+ }; -+ -+ memory { -+ device_type = "memory"; -+ reg = <0x40000000 0>; -+ }; -+ -+ gic: interrupt-controller@1c81000 { -+ compatible = "arm,gic-400"; -+ interrupt-controller; -+ #interrupt-cells = <3>; -+ #address-cells = <0>; -+ -+ reg = <0x01c81000 0x1000>, -+ <0x01c82000 0x2000>, -+ <0x01c84000 0x2000>, -+ <0x01c86000 0x2000>; -+ interrupts = ; -+ }; -+ -+ timer { -+ compatible = "arm,armv8-timer"; -+ interrupts = , -+ , -+ , -+ ; -+ }; -+ -+ clocks { -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ osc24M: osc24M_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <24000000>; -+ clock-output-names = "osc24M"; -+ }; -+ -+ osc32k: osc32k_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-clock"; -+ clock-frequency = <32768>; -+ clock-output-names = "osc32k"; -+ }; -+ -+ pll1: pll1_clk@1c20000 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun8i-a23-pll1-clk"; -+ reg = <0x01c20000 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll1"; -+ }; -+ -+ pll6: pll6_clk@1c20028 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun6i-a31-pll6-clk"; -+ reg = <0x01c20028 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll6", "pll6x2"; -+ }; -+ -+ pll6d2: pll6d2_clk { -+ #clock-cells = <0>; -+ compatible = "fixed-factor-clock"; -+ clock-div = <2>; -+ clock-mult = <1>; -+ clocks = <&pll6 0>; -+ clock-output-names = "pll6d2"; -+ }; -+ -+ pll7: pll7_clk@1c2002c { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun6i-a31-pll6-clk"; -+ reg = <0x01c2002c 0x4>; -+ clocks = <&osc24M>; -+ clock-output-names = "pll7", "pll7x2"; -+ }; -+ -+ cpu: cpu_clk@1c20050 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-cpu-clk"; -+ reg = <0x01c20050 0x4>; -+ clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll1>; -+ clock-output-names = "cpu"; -+ critical-clocks = <0>; -+ }; -+ -+ axi: axi_clk@1c20050 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-axi-clk"; -+ reg = <0x01c20050 0x4>; -+ clocks = <&cpu>; -+ clock-output-names = "axi"; -+ }; -+ -+ ahb1: ahb1_clk@1c20054 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun6i-a31-ahb1-clk"; -+ reg = <0x01c20054 0x4>; -+ clocks = <&osc32k>, <&osc24M>, <&axi>, <&pll6 0>; -+ clock-output-names = "ahb1"; -+ }; -+ -+ ahb2: ahb2_clk@1c2005c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun8i-h3-ahb2-clk"; -+ reg = <0x01c2005c 0x4>; -+ clocks = <&ahb1>, <&pll6d2>; -+ clock-output-names = "ahb2"; -+ }; -+ -+ apb1: apb1_clk@1c20054 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-apb0-clk"; -+ reg = <0x01c20054 0x4>; -+ clocks = <&ahb1>; -+ clock-output-names = "apb1"; -+ }; -+ -+ apb2: apb2_clk@1c20058 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-apb1-clk"; -+ reg = <0x01c20058 0x4>; -+ clocks = <&osc32k>, <&osc24M>, <&pll6 1>, <&pll6 1>; -+ clock-output-names = "apb2"; -+ }; -+ -+ bus_gates: bus_gates_clk@1c20060 { -+ #clock-cells = <1>; -+ compatible = "allwinner,sun50i-a64-bus-gates-clk", -+ "allwinner,sunxi-multi-bus-gates-clk"; -+ reg = <0x01c20060 0x14>; -+ ahb1_parent { -+ clocks = <&ahb1>; -+ clock-indices = <1>, <5>, -+ <6>, <8>, -+ <9>, <10>, -+ <13>, <14>, -+ <18>, <19>, -+ <20>, <21>, -+ <23>, <24>, -+ <25>, <28>, -+ <32>, <35>, -+ <36>, <37>, -+ <40>, <43>, -+ <44>, <52>, -+ <53>, <54>, -+ <135>; -+ clock-output-names = "bus_mipidsi", "bus_ce", -+ "bus_dma", "bus_mmc0", -+ "bus_mmc1", "bus_mmc2", -+ "bus_nand", "bus_sdram", -+ "bus_ts", "bus_hstimer", -+ "bus_spi0", "bus_spi1", -+ "bus_otg", "bus_otg_ehci0", -+ "bus_ehci0", "bus_otg_ohci0", -+ "bus_ve", "bus_lcd0", -+ "bus_lcd1", "bus_deint", -+ "bus_csi", "bus_hdmi", -+ "bus_de", "bus_gpu", -+ "bus_msgbox", "bus_spinlock", -+ "bus_dbg"; -+ }; -+ ahb2_parent { -+ clocks = <&ahb2>; -+ clock-indices = <17>, <29>; -+ clock-output-names = "bus_gmac", "bus_ohci0"; -+ }; -+ apb1_parent { -+ clocks = <&apb1>; -+ clock-indices = <64>, <65>, -+ <69>, <72>, -+ <76>, <77>, -+ <78>; -+ clock-output-names = "bus_codec", "bus_spdif", -+ "bus_pio", "bus_ths", -+ "bus_i2s0", "bus_i2s1", -+ "bus_i2s2"; -+ }; -+ abp2_parent { -+ clocks = <&apb2>; -+ clock-indices = <96>, <97>, -+ <98>, <101>, -+ <112>, <113>, -+ <114>, <115>, -+ <116>; -+ clock-output-names = "bus_i2c0", "bus_i2c1", -+ "bus_i2c2", "bus_scr", -+ "bus_uart0", "bus_uart1", -+ "bus_uart2", "bus_uart3", -+ "bus_uart4"; -+ }; -+ }; -+ -+ mmc0_clk: mmc0_clk@1c20088 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod0-clk"; -+ reg = <0x01c20088 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; -+ clock-output-names = "mmc0"; -+ }; -+ -+ mmc1_clk: mmc1_clk@1c2008c { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod0-clk"; -+ reg = <0x01c2008c 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; -+ clock-output-names = "mmc1"; -+ }; -+ -+ mmc2_clk: mmc2_clk@1c20090 { -+ #clock-cells = <0>; -+ compatible = "allwinner,sun4i-a10-mod0-clk"; -+ reg = <0x01c20090 0x4>; -+ clocks = <&osc24M>, <&pll6 1>, <&pll7 1>; -+ clock-output-names = "mmc2"; -+ }; -+ }; -+ -+ soc { -+ compatible = "simple-bus"; -+ #address-cells = <1>; -+ #size-cells = <1>; -+ ranges; -+ -+ mmc0: mmc@1c0f000 { -+ compatible = "allwinner,sun50i-a64-mmc", -+ "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c0f000 0x1000>; -+ clocks = <&bus_gates 8>, <&mmc0_clk>, -+ <&mmc0_clk>, <&mmc0_clk>; -+ clock-names = "ahb", "mmc", -+ "output", "sample"; -+ resets = <&ahb_rst 8>; -+ reset-names = "ahb"; -+ interrupts = ; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ mmc1: mmc@1c10000 { -+ compatible = "allwinner,sun50i-a64-mmc", -+ "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c10000 0x1000>; -+ clocks = <&bus_gates 9>, <&mmc1_clk>, -+ <&mmc1_clk>, <&mmc1_clk>; -+ clock-names = "ahb", "mmc", -+ "output", "sample"; -+ resets = <&ahb_rst 9>; -+ reset-names = "ahb"; -+ interrupts = ; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ mmc2: mmc@1c11000 { -+ compatible = "allwinner,sun50i-a64-mmc", -+ "allwinner,sun5i-a13-mmc"; -+ reg = <0x01c11000 0x1000>; -+ clocks = <&bus_gates 10>, <&mmc2_clk>, -+ <&mmc2_clk>, <&mmc2_clk>; -+ clock-names = "ahb", "mmc", -+ "output", "sample"; -+ resets = <&ahb_rst 10>; -+ reset-names = "ahb"; -+ interrupts = ; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ pio: pinctrl@1c20800 { -+ compatible = "allwinner,sun50i-a64-pinctrl"; -+ reg = <0x01c20800 0x400>; -+ interrupts = , -+ , -+ ; -+ clocks = <&bus_gates 69>; -+ gpio-controller; -+ #gpio-cells = <3>; -+ interrupt-controller; -+ #interrupt-cells = <2>; -+ -+ uart0_pins_a: uart0@0 { -+ allwinner,pins = "PB8", "PB9"; -+ allwinner,function = "uart0"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart0_pins_b: uart0@1 { -+ allwinner,pins = "PF2", "PF3"; -+ allwinner,function = "uart0"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart1_2pins: uart1_2@0 { -+ allwinner,pins = "PG6", "PG7"; -+ allwinner,function = "uart1"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart1_4pins: uart1_4@0 { -+ allwinner,pins = "PG6", "PG7", "PG8", "PG9"; -+ allwinner,function = "uart1"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart2_2pins: uart2_2@0 { -+ allwinner,pins = "PB0", "PB1"; -+ allwinner,function = "uart2"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart2_4pins: uart2_4@0 { -+ allwinner,pins = "PB0", "PB1", "PB2", "PB3"; -+ allwinner,function = "uart2"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart3_pins_a: uart3@0 { -+ allwinner,pins = "PD0", "PD1"; -+ allwinner,function = "uart3"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart3_2pins_b: uart3_2@1 { -+ allwinner,pins = "PH4", "PH5"; -+ allwinner,function = "uart3"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart3_4pins_b: uart3_4@1 { -+ allwinner,pins = "PH4", "PH5", "PH6", "PH7"; -+ allwinner,function = "uart3"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart4_2pins: uart4_2@0 { -+ allwinner,pins = "PD2", "PD3"; -+ allwinner,function = "uart4"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ uart4_4pins: uart4_4@0 { -+ allwinner,pins = "PD2", "PD3", "PD4", "PD5"; -+ allwinner,function = "uart4"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc0_pins: mmc0@0 { -+ allwinner,pins = "PF0", "PF1", "PF2", "PF3", -+ "PF4", "PF5"; -+ allwinner,function = "mmc0"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc0_default_cd_pin: mmc0_cd_pin@0 { -+ allwinner,pins = "PF6"; -+ allwinner,function = "gpio_in"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc1_pins: mmc1@0 { -+ allwinner,pins = "PG0", "PG1", "PG2", "PG3", -+ "PG4", "PG5"; -+ allwinner,function = "mmc1"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ mmc2_pins: mmc2@0 { -+ allwinner,pins = "PC1", "PC5", "PC6", "PC8", -+ "PC9", "PC10"; -+ allwinner,function = "mmc2"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ i2c0_pins: i2c0_pins { -+ allwinner,pins = "PH0", "PH1"; -+ allwinner,function = "i2c0"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ i2c1_pins: i2c1_pins { -+ allwinner,pins = "PH2", "PH3"; -+ allwinner,function = "i2c1"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ -+ i2c2_pins: i2c2_pins { -+ allwinner,pins = "PE14", "PE15"; -+ allwinner,function = "i2c2"; -+ allwinner,drive = ; -+ allwinner,pull = ; -+ }; -+ }; -+ -+ ahb_rst: reset@1c202c0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202c0 0xc>; -+ }; -+ -+ apb1_rst: reset@1c202d0 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202d0 0x4>; -+ }; -+ -+ apb2_rst: reset@1c202d8 { -+ #reset-cells = <1>; -+ compatible = "allwinner,sun6i-a31-clock-reset"; -+ reg = <0x01c202d8 0x4>; -+ }; -+ -+ uart0: serial@1c28000 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28000 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 112>; -+ resets = <&apb2_rst 16>; -+ status = "disabled"; -+ }; -+ -+ uart1: serial@1c28400 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28400 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 113>; -+ resets = <&apb2_rst 17>; -+ status = "disabled"; -+ }; -+ -+ uart2: serial@1c28800 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28800 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 114>; -+ resets = <&apb2_rst 18>; -+ status = "disabled"; -+ }; -+ -+ uart3: serial@1c28c00 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c28c00 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 115>; -+ resets = <&apb2_rst 19>; -+ status = "disabled"; -+ }; -+ -+ uart4: serial@1c29000 { -+ compatible = "snps,dw-apb-uart"; -+ reg = <0x01c29000 0x400>; -+ interrupts = ; -+ reg-shift = <2>; -+ reg-io-width = <4>; -+ clocks = <&bus_gates 116>; -+ resets = <&apb2_rst 20>; -+ status = "disabled"; -+ }; -+ -+ rtc: rtc@1f00000 { -+ compatible = "allwinner,sun6i-a31-rtc"; -+ reg = <0x01f00000 0x54>; -+ interrupts = , -+ ; -+ }; -+ -+ i2c0: i2c@1c2ac00 { -+ compatible = "allwinner,sun6i-a31-i2c"; -+ reg = <0x01c2ac00 0x400>; -+ interrupts = ; -+ clocks = <&bus_gates 96>; -+ resets = <&apb2_rst 0>; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ i2c1: i2c@1c2b000 { -+ compatible = "allwinner,sun6i-a31-i2c"; -+ reg = <0x01c2b000 0x400>; -+ interrupts = ; -+ clocks = <&bus_gates 97>; -+ resets = <&apb2_rst 1>; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ -+ i2c2: i2c@1c2b400 { -+ compatible = "allwinner,sun6i-a31-i2c"; -+ reg = <0x01c2b400 0x400>; -+ interrupts = ; -+ clocks = <&bus_gates 98>; -+ resets = <&apb2_rst 2>; -+ status = "disabled"; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ }; -+ }; -+}; -diff --git a/drivers/clk/sunxi/Makefile b/drivers/clk/sunxi/Makefile -index 3fd7901..3a9dc31 100644 ---- a/drivers/clk/sunxi/Makefile -+++ b/drivers/clk/sunxi/Makefile -@@ -11,6 +11,7 @@ obj-y += clk-a10-ve.o - obj-y += clk-a20-gmac.o - obj-y += clk-mod0.o - obj-y += clk-simple-gates.o -+obj-y += clk-multi-gates.o - obj-y += clk-sun8i-bus-gates.o - obj-y += clk-sun8i-mbus.o - obj-y += clk-sun9i-core.o -diff --git a/drivers/clk/sunxi/clk-factors.c b/drivers/clk/sunxi/clk-factors.c -index 59428db..607ba53 100644 ---- a/drivers/clk/sunxi/clk-factors.c -+++ b/drivers/clk/sunxi/clk-factors.c -@@ -184,7 +184,8 @@ struct clk *sunxi_factors_register(struct device_node *node, - if (data->name) - clk_name = data->name; - else -- of_property_read_string(node, "clock-output-names", &clk_name); -+ of_property_read_string_index(node, "clock-output-names", -+ data->name_idx, &clk_name); - - factors = kzalloc(sizeof(struct clk_factors), GFP_KERNEL); - if (!factors) -diff --git a/drivers/clk/sunxi/clk-factors.h b/drivers/clk/sunxi/clk-factors.h -index 171085a..cc89d1f 100644 ---- a/drivers/clk/sunxi/clk-factors.h -+++ b/drivers/clk/sunxi/clk-factors.h -@@ -26,6 +26,7 @@ struct factors_data { - void (*getter)(struct factors_request *req); - void (*recalc)(struct factors_request *req); - const char *name; -+ int name_idx; - }; - - struct clk_factors { -diff --git a/drivers/clk/sunxi/clk-multi-gates.c b/drivers/clk/sunxi/clk-multi-gates.c -new file mode 100644 -index 0000000..76e715a ---- /dev/null -+++ b/drivers/clk/sunxi/clk-multi-gates.c -@@ -0,0 +1,105 @@ -+/* -+ * Copyright (C) 2016 ARM Ltd. -+ * -+ * Based on clk-sun8i-bus-gates.c, which is: -+ * Copyright (C) 2015 Jens Kuske -+ * Based on clk-simple-gates.c, which is: -+ * Copyright 2015 Maxime Ripard -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License as published by -+ * the Free Software Foundation; either version 2 of the License, or -+ * (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+ -+static DEFINE_SPINLOCK(gates_lock); -+ -+static void __init sunxi_parse_parent(struct device_node *node, -+ struct clk_onecell_data *clk_data, -+ void __iomem *reg) -+{ -+ const char *parent = of_clk_get_parent_name(node, 0); -+ const char *clk_name; -+ struct property *prop; -+ struct clk *clk; -+ const __be32 *p; -+ int index, i = 0; -+ -+ of_property_for_each_u32(node, "clock-indices", prop, p, index) { -+ of_property_read_string_index(node, "clock-output-names", -+ i, &clk_name); -+ -+ clk = clk_register_gate(NULL, clk_name, parent, 0, -+ reg + 4 * (index / 32), index % 32, -+ 0, &gates_lock); -+ i++; -+ if (IS_ERR(clk)) { -+ pr_warn("could not register gate clock \"%s\"\n", -+ clk_name); -+ continue; -+ } -+ if (clk_data->clks[index]) -+ pr_warn("bus-gate clock %s: index #%d already registered as %s\n", -+ clk_name, index, "?"); -+ else -+ clk_data->clks[index] = clk; -+ } -+} -+ -+static void __init sunxi_multi_bus_gates_init(struct device_node *node) -+{ -+ struct clk_onecell_data *clk_data; -+ struct device_node *child; -+ struct property *prop; -+ struct resource res; -+ void __iomem *reg; -+ const __be32 *p; -+ int number = 0; -+ int index; -+ -+ reg = of_io_request_and_map(node, 0, of_node_full_name(node)); -+ if (IS_ERR(reg)) -+ return; -+ -+ clk_data = kmalloc(sizeof(struct clk_onecell_data), GFP_KERNEL); -+ if (!clk_data) -+ goto err_unmap; -+ -+ for_each_child_of_node(node, child) -+ of_property_for_each_u32(child, "clock-indices", prop, p, index) -+ number = max(number, index); -+ -+ clk_data->clks = kcalloc(number + 1, sizeof(struct clk *), GFP_KERNEL); -+ if (!clk_data->clks) -+ goto err_free_data; -+ -+ for_each_child_of_node(node, child) -+ sunxi_parse_parent(child, clk_data, reg); -+ -+ clk_data->clk_num = number + 1; -+ if (of_clk_add_provider(node, of_clk_src_onecell_get, clk_data)) -+ pr_err("registering bus-gate clock %s failed\n", node->name); -+ -+ return; -+ -+err_free_data: -+ kfree(clk_data); -+err_unmap: -+ iounmap(reg); -+ of_address_to_resource(node, 0, &res); -+ release_mem_region(res.start, resource_size(&res)); -+} -+ -+CLK_OF_DECLARE(sunxi_multi_bus_gates, "allwinner,sunxi-multi-bus-gates-clk", -+ sunxi_multi_bus_gates_init); -diff --git a/drivers/clk/sunxi/clk-sunxi.c b/drivers/clk/sunxi/clk-sunxi.c -index 5ba2188..ca59458 100644 ---- a/drivers/clk/sunxi/clk-sunxi.c -+++ b/drivers/clk/sunxi/clk-sunxi.c -@@ -711,14 +711,14 @@ static const struct factors_data sun4i_pll6_data __initconst = { - .enable = 31, - .table = &sun4i_pll5_config, - .getter = sun4i_get_pll5_factors, -- .name = "pll6", -+ .name_idx = 2, - }; - - static const struct factors_data sun6i_a31_pll6_data __initconst = { - .enable = 31, - .table = &sun6i_a31_pll6_config, - .getter = sun6i_a31_get_pll6_factors, -- .name = "pll6x2", -+ .name_idx = 1, - }; - - static const struct factors_data sun5i_a13_ahb_data __initconst = { --- -2.5.0 - diff --git a/bcm283x-upstream-fixes.patch b/bcm283x-upstream-fixes.patch index fbb170650..f6633aff9 100644 --- a/bcm283x-upstream-fixes.patch +++ b/bcm283x-upstream-fixes.patch @@ -135,31 +135,3 @@ index 0000000..2f36722 +}; -- 2.7.3 - -From 528285e99c25249456023d28f521689bf9e9eb8b Mon Sep 17 00:00:00 2001 -From: Peter Robinson -Date: Wed, 30 Mar 2016 09:35:13 +0100 -Subject: [PATCH 32/36] drop usb power domain support for the moment, kills usb - ---- - arch/arm/boot/dts/bcm2835-rpi.dtsi | 4 ---- - 1 file changed, 4 deletions(-) - -diff --git a/arch/arm/boot/dts/bcm2835-rpi.dtsi b/arch/arm/boot/dts/bcm2835-rpi.dtsi -index caf2707..b1e8145 100644 ---- a/arch/arm/boot/dts/bcm2835-rpi.dtsi -+++ b/arch/arm/boot/dts/bcm2835-rpi.dtsi -@@ -71,10 +71,6 @@ - status = "okay"; - }; - --&usb { -- power-domains = <&power RPI_POWER_DOMAIN_USB>; --}; -- - &v3d { - power-domains = <&power RPI_POWER_DOMAIN_V3D>; - }; --- -2.7.3 - diff --git a/config-arm64 b/config-arm64 index 2290a24cd..2e0e88057 100644 --- a/config-arm64 +++ b/config-arm64 @@ -192,6 +192,7 @@ CONFIG_SUNXI_RSB=m CONFIG_AHCI_SUNXI=m CONFIG_NET_VENDOR_ALLWINNER=y # CONFIG_SUN4I_EMAC is not set +CONFIG_SUN8I_EMAC=m # CONFIG_MDIO_SUN4I is not set # CONFIG_KEYBOARD_SUN4I_LRADC is not set # CONFIG_TOUCHSCREEN_SUN4I is not set diff --git a/config-armv7-generic b/config-armv7-generic index 770e94ae7..4c0e73a88 100644 --- a/config-armv7-generic +++ b/config-armv7-generic @@ -231,6 +231,7 @@ CONFIG_IR_SUNXI=m CONFIG_MDIO_SUN4I=m CONFIG_DWMAC_SUNXI=m CONFIG_SUN4I_EMAC=m +CONFIG_SUN8I_EMAC=m CONFIG_RTC_DRV_SUN6I=m CONFIG_MTD_NAND_SUNXI=m CONFIG_SERIO_SUN4I_PS2=m @@ -251,7 +252,7 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_8250_BCM2835AUX=y CONFIG_DMA_BCM2835=m CONFIG_MMC_SDHCI_IPROC=m -CONFIG_BCM2835_MBOX=m +CONFIG_BCM2835_MBOX=y CONFIG_PWM_BCM2835=m CONFIG_HW_RANDOM_BCM2835=m CONFIG_I2C_BCM2835=m @@ -567,7 +568,6 @@ CONFIG_RTC_DRV_TPS80031=m # CONFIG_RTC_DRV_DS1347 is not set # CONFIG_RTC_DRV_DS1343 is not set # CONFIG_RTC_DRV_MCP795 is not set -# CONFIG_RTC_DRV_XGENE is not set # Regulators # CONFIG_REGULATOR_ACT8865 is not set diff --git a/kernel.spec b/kernel.spec index 216cdde4b..1214cbd91 100644 --- a/kernel.spec +++ b/kernel.spec @@ -506,10 +506,6 @@ Patch421: qcom-QDF2432-tmp-errata.patch # http://www.spinics.net/lists/arm-kernel/msg490981.html Patch422: geekbox-v4-device-tree-support.patch -# http://www.spinics.net/lists/arm-kernel/msg483898.html -# This has major conflicts and needs to be rebased -# Patch423: Initial-AllWinner-A64-and-PINE64-support.patch - Patch425: arm64-pcie-quirks-xgene.patch # http://www.spinics.net/lists/linux-tegra/msg26029.html @@ -2157,6 +2153,9 @@ fi # # %changelog +* Sun Aug 28 2016 Peter Robinson +- Minor ARM updates + * Thu Aug 25 2016 Justin M. Forbes - 4.8.0-0.rc3.git2.1 - Linux v4.8-rc3-39-g61c0457 -- cgit From e2ba24e6f4ad631ab69e6ee8de6eb9263863d563 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Mon, 29 Aug 2016 00:30:22 +0100 Subject: enable common ARM IoT pressure sensor --- config-arm-generic | 1 + 1 file changed, 1 insertion(+) diff --git a/config-arm-generic b/config-arm-generic index 200d93ab7..24558bc31 100644 --- a/config-arm-generic +++ b/config-arm-generic @@ -492,6 +492,7 @@ CONFIG_SPI_PL022=m CONFIG_SENSORS_IIO_HWMON=m CONFIG_IIO_SYSFS_TRIGGER=m CONFIG_SENSORS_ARM_SCPI=m +CONFIG_IIO_ST_PRESS=m # PHY framework CONFIG_GENERIC_PHY=y -- cgit From 2c530ad2579e8c3c14566c6597b9990898a3c964 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Mon, 29 Aug 2016 09:20:11 +0100 Subject: update bcm2837 with what's currently upstream for a64 --- bcm2837-initial-support.patch | 154 ++++++++++++++++++++++++++++++++++++++++++ bcm283x-upstream-fixes.patch | 137 ------------------------------------- config-arm64 | 2 +- kernel.spec | 2 +- 4 files changed, 156 insertions(+), 139 deletions(-) create mode 100644 bcm2837-initial-support.patch delete mode 100644 bcm283x-upstream-fixes.patch diff --git a/bcm2837-initial-support.patch b/bcm2837-initial-support.patch new file mode 100644 index 000000000..0521f05f5 --- /dev/null +++ b/bcm2837-initial-support.patch @@ -0,0 +1,154 @@ +From a2858804c7f5f4585b718543236b7ba3b3ec813a Mon Sep 17 00:00:00 2001 +From: Peter Robinson +Date: Mon, 29 Aug 2016 09:14:15 +0100 +Subject: [PATCH] ARM: bcm283x: Add devicetree for the Raspberry Pi 3. + +For now this doesn't support the new hardware present on the Pi 3 (BT, +wifi, GPIO expander). + +Rebased to the patch that went upstream for ARM64 + +Signed-off-by: Peter Robinson +--- + arch/arm/boot/dts/Makefile | 3 +- + arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 30 ++++++++++++++ + arch/arm/boot/dts/bcm2837.dtsi | 76 +++++++++++++++++++++++++++++++++++ + 3 files changed, 108 insertions(+), 1 deletion(-) + create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts + create mode 100644 arch/arm/boot/dts/bcm2837.dtsi + +diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile +index faacd52..ec41888 100644 +--- a/arch/arm/boot/dts/Makefile ++++ b/arch/arm/boot/dts/Makefile +@@ -69,7 +69,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ + bcm2835-rpi-b-rev2.dtb \ + bcm2835-rpi-b-plus.dtb \ + bcm2835-rpi-a-plus.dtb \ +- bcm2836-rpi-2-b.dtb ++ bcm2836-rpi-2-b.dtb \ ++ bcm2837-rpi-3-b.dtb + dtb-$(CONFIG_ARCH_BCM_5301X) += \ + bcm4708-asus-rt-ac56u.dtb \ + bcm4708-asus-rt-ac68u.dtb \ +diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +new file mode 100644 +index 0000000..7841b72 +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts +@@ -0,0 +1,30 @@ ++/dts-v1/; ++#include "bcm2837.dtsi" ++#include "bcm2835-rpi.dtsi" ++#include "bcm283x-rpi-smsc9514.dtsi" ++ ++/ { ++ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; ++ model = "Raspberry Pi 3 Model B"; ++ ++ memory { ++ reg = <0 0x40000000>; ++ }; ++ ++ leds { ++ act { ++ gpios = <&gpio 47 0>; ++ }; ++ ++ pwr { ++ label = "PWR"; ++ gpios = <&gpio 35 0>; ++ default-state = "keep"; ++ linux,default-trigger = "default-on"; ++ }; ++ }; ++}; ++ ++&uart1 { ++ status = "okay"; ++}; +diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi +new file mode 100644 +index 0000000..8216bbb +--- /dev/null ++++ b/arch/arm/boot/dts/bcm2837.dtsi +@@ -0,0 +1,76 @@ ++#include "bcm283x.dtsi" ++ ++/ { ++ compatible = "brcm,bcm2836"; ++ ++ soc { ++ ranges = <0x7e000000 0x3f000000 0x1000000>, ++ <0x40000000 0x40000000 0x00001000>; ++ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; ++ ++ local_intc: local_intc { ++ compatible = "brcm,bcm2836-l1-intc"; ++ reg = <0x40000000 0x100>; ++ interrupt-controller; ++ #interrupt-cells = <1>; ++ interrupt-parent = <&local_intc>; ++ }; ++ }; ++ ++ timer { ++ compatible = "arm,armv7-timer"; ++ interrupt-parent = <&local_intc>; ++ interrupts = <0>, // PHYS_SECURE_PPI ++ <1>, // PHYS_NONSECURE_PPI ++ <3>, // VIRT_PPI ++ <2>; // HYP_PPI ++ always-on; ++ }; ++ ++ cpus: cpus { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ cpu0: cpu@0 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <0>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000d8>; ++ }; ++ ++ cpu1: cpu@1 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <1>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e0>; ++ }; ++ ++ cpu2: cpu@2 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <2>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000e8>; ++ }; ++ ++ cpu3: cpu@3 { ++ device_type = "cpu"; ++ compatible = "arm,cortex-a53"; ++ reg = <3>; ++ enable-method = "spin-table"; ++ cpu-release-addr = <0x0 0x000000f0>; ++ }; ++ }; ++}; ++ ++/* Make the BCM2835-style global interrupt controller be a child of the ++ * CPU-local interrupt controller. ++ */ ++&intc { ++ compatible = "brcm,bcm2836-armctrl-ic"; ++ reg = <0x7e00b200 0x200>; ++ interrupt-parent = <&local_intc>; ++ interrupts = <8>; ++}; +-- +2.9.3 + diff --git a/bcm283x-upstream-fixes.patch b/bcm283x-upstream-fixes.patch deleted file mode 100644 index f6633aff9..000000000 --- a/bcm283x-upstream-fixes.patch +++ /dev/null @@ -1,137 +0,0 @@ -From b76b1cdf2e569cceab41dcf3b3f6a90965d0a02c Mon Sep 17 00:00:00 2001 -From: Eric Anholt -Date: Fri, 4 Mar 2016 10:39:29 -0800 -Subject: [PATCH 28/36] ARM: bcm2835: Add devicetree for the Raspberry Pi 3. - -For now this doesn't support the new hardware present on the Pi 3 (BT, -wifi, GPIO expander). Since the GPIO expander isn't supported, we -also don't have the LEDs like the other board files do. - -Signed-off-by: Eric Anholt -Acked-by: Stephen Warren ---- - arch/arm/boot/dts/Makefile | 3 +- - arch/arm/boot/dts/bcm2837-rpi-3-b.dts | 22 ++++++++++++ - arch/arm/boot/dts/bcm2837.dtsi | 68 +++++++++++++++++++++++++++++++++++ - 3 files changed, 92 insertions(+), 1 deletion(-) - create mode 100644 arch/arm/boot/dts/bcm2837-rpi-3-b.dts - create mode 100644 arch/arm/boot/dts/bcm2837.dtsi - -diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile -index d000814..a8a0767 100644 ---- a/arch/arm/boot/dts/Makefile -+++ b/arch/arm/boot/dts/Makefile -@@ -64,7 +64,8 @@ dtb-$(CONFIG_ARCH_BCM2835) += \ - bcm2835-rpi-b-rev2.dtb \ - bcm2835-rpi-b-plus.dtb \ - bcm2835-rpi-a-plus.dtb \ -- bcm2836-rpi-2-b.dtb -+ bcm2836-rpi-2-b.dtb \ -+ bcm2837-rpi-3-b.dtb - dtb-$(CONFIG_ARCH_BCM_5301X) += \ - bcm4708-asus-rt-ac56u.dtb \ - bcm4708-asus-rt-ac68u.dtb \ -diff --git a/arch/arm/boot/dts/bcm2837-rpi-3-b.dts b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -new file mode 100644 -index 0000000..5e8eafd ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2837-rpi-3-b.dts -@@ -0,0 +1,22 @@ -+/dts-v1/; -+#include "bcm2837.dtsi" -+#include "bcm2835-rpi.dtsi" -+ -+/ { -+ compatible = "raspberrypi,3-model-b", "brcm,bcm2837"; -+ model = "Raspberry Pi 3 Model B"; -+ -+ memory { -+ reg = <0 0x40000000>; -+ }; -+}; -+ -+&gpio { -+ pinctrl-0 = <&gpioout &alt0 &i2s_alt0 &alt3>; -+ -+ /* I2S interface */ -+ i2s_alt0: i2s_alt0 { -+ brcm,pins = <28 29 30 31>; -+ brcm,function = ; -+ }; -+}; -diff --git a/arch/arm/boot/dts/bcm2837.dtsi b/arch/arm/boot/dts/bcm2837.dtsi -new file mode 100644 -index 0000000..2f36722 ---- /dev/null -+++ b/arch/arm/boot/dts/bcm2837.dtsi -@@ -0,0 +1,68 @@ -+#include "bcm283x.dtsi" -+ -+/ { -+ compatible = "brcm,bcm2836"; -+ -+ soc { -+ ranges = <0x7e000000 0x3f000000 0x1000000>, -+ <0x40000000 0x40000000 0x00001000>; -+ dma-ranges = <0xc0000000 0x00000000 0x3f000000>; -+ -+ local_intc: local_intc { -+ compatible = "brcm,bcm2836-l1-intc"; -+ reg = <0x40000000 0x100>; -+ interrupt-controller; -+ #interrupt-cells = <1>; -+ interrupt-parent = <&local_intc>; -+ }; -+ }; -+ -+ timer { -+ compatible = "arm,armv7-timer"; -+ interrupt-parent = <&local_intc>; -+ interrupts = <0>, // PHYS_SECURE_PPI -+ <1>, // PHYS_NONSECURE_PPI -+ <3>, // VIRT_PPI -+ <2>; // HYP_PPI -+ always-on; -+ }; -+ -+ cpus: cpus { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ cpu0: cpu@0 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <0>; -+ }; -+ -+ cpu1: cpu@1 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <1>; -+ }; -+ -+ cpu2: cpu@2 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <2>; -+ }; -+ -+ cpu3: cpu@3 { -+ device_type = "cpu"; -+ compatible = "arm,cortex-a53"; -+ reg = <3>; -+ }; -+ }; -+}; -+ -+/* Make the BCM2835-style global interrupt controller be a child of the -+ * CPU-local interrupt controller. -+ */ -+&intc { -+ compatible = "brcm,bcm2836-armctrl-ic"; -+ reg = <0x7e00b200 0x200>; -+ interrupt-parent = <&local_intc>; -+ interrupts = <8>; -+}; --- -2.7.3 diff --git a/config-arm64 b/config-arm64 index 2e0e88057..46708ff31 100644 --- a/config-arm64 +++ b/config-arm64 @@ -206,7 +206,7 @@ CONFIG_PWM_SUN4I=m # CONFIG_PHY_SUN4I_USB is not set # CONFIG_PHY_SUN9I_USB is not set CONFIG_NVMEM_SUNXI_SID=m -# CONFIG_SUNXI_CCU is not set +CONFIG_SUNXI_CCU=y # CONFIG_SUN8I_H3_CCU is not set # qcom diff --git a/kernel.spec b/kernel.spec index 1214cbd91..9819abcdb 100644 --- a/kernel.spec +++ b/kernel.spec @@ -517,7 +517,7 @@ Patch427: omap-rtc-fix-am33xx.patch # http://patchwork.ozlabs.org/patch/587554/ Patch430: ARM-tegra-usb-no-reset.patch -Patch431: bcm283x-upstream-fixes.patch +Patch431: bcm2837-initial-support.patch Patch460: lib-cpumask-Make-CPUMASK_OFFSTACK-usable-without-deb.patch -- cgit From 1f77dbb08ddd34c6faf3f043a596105dea576487 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Mon, 29 Aug 2016 13:17:38 +0100 Subject: arm: increase default CMA size to 32Mb (from 16Mb) --- config-arm-generic | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/config-arm-generic b/config-arm-generic index 24558bc31..819321628 100644 --- a/config-arm-generic +++ b/config-arm-generic @@ -508,7 +508,7 @@ CONFIG_CMA=y CONFIG_DMA_CMA=y # CONFIG_CMA_DEBUG is not set CONFIG_CMA_DEBUGFS=y -CONFIG_CMA_SIZE_MBYTES=16 +CONFIG_CMA_SIZE_MBYTES=32 CONFIG_CMA_SIZE_SEL_MBYTES=y # CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set # CONFIG_CMA_SIZE_SEL_MIN is not set -- cgit From 583f918ee0b89770034db60283a852a21e3b469a Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Mon, 29 Aug 2016 14:08:39 +0100 Subject: arm: just go 64Mb CMA everywhere and be done with it --- config-arm-generic | 2 +- config-armv7-lpae | 3 --- 2 files changed, 1 insertion(+), 4 deletions(-) diff --git a/config-arm-generic b/config-arm-generic index 819321628..19d9466f8 100644 --- a/config-arm-generic +++ b/config-arm-generic @@ -508,7 +508,7 @@ CONFIG_CMA=y CONFIG_DMA_CMA=y # CONFIG_CMA_DEBUG is not set CONFIG_CMA_DEBUGFS=y -CONFIG_CMA_SIZE_MBYTES=32 +CONFIG_CMA_SIZE_MBYTES=64 CONFIG_CMA_SIZE_SEL_MBYTES=y # CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set # CONFIG_CMA_SIZE_SEL_MIN is not set diff --git a/config-armv7-lpae b/config-armv7-lpae index daece122a..c31f4dbe6 100644 --- a/config-armv7-lpae +++ b/config-armv7-lpae @@ -18,9 +18,6 @@ CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y CONFIG_ARM_VIRT_EXT=y CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8 -CONFIG_CMA_SIZE_SEL_MBYTES=y -CONFIG_CMA_SIZE_MBYTES=64 - # Little.BIG CONFIG_BIG_LITTLE=y CONFIG_BL_SWITCHER=y -- cgit