From 9ab9ea2db0b13375d3d7114d5c82eb298a118740 Mon Sep 17 00:00:00 2001
From: "Justin M. Forbes" <jforbes@fedoraproject.org>
Date: Tue, 4 Aug 2020 17:00:01 -0500
Subject: Linux v5.8 rebase

Signed-off-by: Justin M. Forbes <jforbes@fedoraproject.org>
---
 ...nner-dts-a64-add-LCD-related-device-nodes.patch | 81 ++++++++++++++++++++++
 1 file changed, 81 insertions(+)
 create mode 100644 0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch

(limited to '0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch')

diff --git a/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch b/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
new file mode 100644
index 000000000..e3b07c2bb
--- /dev/null
+++ b/0001-arm64-allwinner-dts-a64-add-LCD-related-device-nodes.patch
@@ -0,0 +1,81 @@
+From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
+From: Icenowy Zheng <icenowy@aosc.io>
+Date: Mon, 16 Mar 2020 21:35:03 +0800
+Subject: [PATCH] arm64: allwinner: dts: a64: add LCD-related device nodes for
+ PinePhone
+
+PinePhone uses PWM backlight and a XBD599 LCD panel over DSI for
+display.
+
+Add its device nodes.
+
+Signed-off-by: Icenowy Zheng <icenowy@aosc.io>
+---
+ .../dts/allwinner/sun50i-a64-pinephone.dtsi   | 37 +++++++++++++++++++
+ 1 file changed, 37 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+index cefda145c3c9..96d9150423e0 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+@@ -16,6 +16,15 @@ aliases {
+ 		serial0 = &uart0;
+ 	};
+
++	backlight: backlight {
++		compatible = "pwm-backlight";
++		pwms = <&r_pwm 0 50000 PWM_POLARITY_INVERTED>;
++		brightness-levels = <0 16 18 20 22 24 26 29 32 35 38 42 46 51 56 62 68 75 83 91 100>;
++		default-brightness-level = <15>;
++		enable-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */
++		power-supply = <&reg_ldo_io0>;
++	};
++
+ 	chosen {
+ 		stdout-path = "serial0:115200n8";
+ 	};
+@@ -84,6 +93,30 @@ &dai {
+ 	status = "okay";
+ };
+
++&de {
++	status = "okay";
++};
++
++&dphy {
++	status = "okay";
++};
++
++&dsi {
++	vcc-dsi-supply = <&reg_dldo1>;
++	#address-cells = <1>;
++	#size-cells = <0>;
++	status = "okay";
++
++	panel@0 {
++		compatible = "xingbangda,xbd599";
++		reg = <0>;
++		reset-gpios = <&pio 3 23 GPIO_ACTIVE_LOW>; /* PD23 */
++		iovcc-supply = <&reg_dldo2>;
++		vcc-supply = <&reg_ldo_io0>;
++		backlight = <&backlight>;
++	};
++};
++
+ &ehci0 {
+ 	status = "okay";
+ };
+@@ -188,6 +221,10 @@ &r_pio {
+ 	 */
+ };
+
++&r_pwm {
++	status = "okay";
++};
++
+ &r_rsb {
+ 	status = "okay";
+
+-- 
+2.26.2
+
-- 
cgit